aboutsummaryrefslogtreecommitdiff
path: root/arch/arm64
AgeCommit message (Collapse)AuthorFilesLines
2022-12-06Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+16
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Revert the dropping of the cache invalidation from the arm64 arch_dma_prep_coherent() as it caused a regression in the qcom_q6v5_mss remoteproc driver. The driver is already buggy but the original arm64 change made the problem obvious. The change will be re-introduced once the driver is fixed" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()"
2022-12-06Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()"Will Deacon1-1/+16
This reverts commit c44094eee32f32f175aadc0efcac449d99b1bbf7. Although the semantics of the DMA API require only a clean operation here, it turns out that the Qualcomm 'qcom_q6v5_mss' remoteproc driver (ab)uses the DMA API for transferring the modem firmware to the secure world via calls to Trustzone [1]. Once the firmware buffer has changed hands, _any_ access from the non-secure side (i.e. Linux) will be detected on the bus and result in a full system reset [2]. Although this is possible even with this revert in place (due to speculative reads via the cacheable linear alias of memory), anecdotally the problem occurs considerably more frequently when the lines have not been invalidated, assumedly due to some micro-architectural interactions with the cache hierarchy. Revert the offending change for now, along with a comment, so that the Qualcomm developers have time to fix the driver [3] to use a firmware buffer which does not have a cacheable alias in the linear map. Link: https://lore.kernel.org/r/[email protected] [1] Link: https://lore.kernel.org/r/CAMi1Hd3H2k1J8hJ6e-Miy5+nVDNzv6qQ3nN-9929B0GbHJkXEg@mail.gmail.com/ [2] Link: https://lore.kernel.org/r/20221206092152.GD15486@thinkpad [2] Reported-by: Amit Pundir <[email protected]> Reported-by: Manivannan Sadhasivam <[email protected]> Cc: Thorsten Leemhuis <[email protected]> Cc: Sibi Sankar <[email protected]> Signed-off-by: Will Deacon <[email protected]> Acked-by: Manivannan Sadhasivam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Catalin Marinas <[email protected]>
2022-12-06arm64: dts: qcom: sc8280xp: fix UFS DMA coherencyJohan Hovold1-0/+2
The SC8280XP UFS controllers are cache coherent and must be marked as such in the devicetree to avoid potential data corruption. Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Cc: [email protected] # 6.0 Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sc7280: Add DT for sc7280-herobrine-zombieOwen Yang4-0/+346
Add DT for sc7280-herobrine-zombie Reviewed-by: Matthias Kaehlcke <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Signed-off-by: Owen Yang <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/20221205133603.v15.2.I80aa32497bfd67bc8a372c1418ccc443ccf193e4@changeid
2022-12-06arm64: dts: qcom: sm8250-sony-xperia-edo: fix no-mmc property for SDHCIKrzysztof Kozlowski1-1/+1
There is no "no-emmc" property, so intention for SD/SDIO only nodes was to use "no-mmc": qcom/sm8250-sony-xperia-edo-pdx206.dtb: mmc@8804000: Unevaluated properties are not allowed ('no-emmc' was unexpected) Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sdm845-sony-xperia-tama: fix no-mmc property for SDHCIKrzysztof Kozlowski1-1/+1
There is no "no-emmc" property, so intention for SD/SDIO only nodes was to use "no-mmc": qcom/sdm845-sony-xperia-tama-akatsuki.dtb: mmc@8804000: Unevaluated properties are not allowed ('no-emmc' was unexpected) Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sda660-inforce-ifc6560: fix no-mmc property for SDHCIKrzysztof Kozlowski1-1/+1
There is no "no-emmc" property, so intention for SD/SDIO only nodes was to use "no-mmc": qcom/sda660-inforce-ifc6560.dtb: mmc@c084000: Unevaluated properties are not allowed ('no-emmc' was unexpected) Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sa8155p-adp: fix no-mmc property for SDHCIKrzysztof Kozlowski1-1/+1
There is no "no-emmc" property, so intention for SD/SDIO only nodes was to use "no-mmc": qcom/sa8155p-adp.dtb: mmc@8804000: Unevaluated properties are not allowed ('no-emmc' was unexpected) Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: qrb5165-rb: fix no-mmc property for SDHCIKrzysztof Kozlowski1-1/+1
There is no "no-emmc" property, so intention for SD/SDIO only nodes was to use "no-mmc": qcom/qrb5165-rb5.dtb: mmc@8804000: Unevaluated properties are not allowed ('no-emmc' was unexpected) Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8450: align MMC node names with dtschemaKrzysztof Kozlowski1-1/+1
The bindings expect "mmc" for MMC/SDHCI nodes: qcom/sm8450-sony-xperia-nagara-pdx223.dtb: sdhci@8804000: $nodename:0: 'sdhci@8804000' does not match '^mmc(@.*)?$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sc7180-trogdor: use generic node namesKrzysztof Kozlowski5-13/+13
According to Devicetree specification, the node names should be somewhat generic. Use "amplifier" for max98360a and "-regulator" for fixed regulators. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8450-hdk: add sound supportSrinivas Kandagatla1-0/+186
Add sound support to SM8450 HDK board. Tested setup so far is only two speakers (working) and head-phones (only one channel working). Signed-off-by: Srinivas Kandagatla <[email protected]> Co-developed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8450: add Soundwire and LPASSSrinivas Kandagatla1-0/+324
Add Soundwire controllers, Low Power Audio SubSystem (LPASS) devices and LPASS pin controller. Signed-off-by: Srinivas Kandagatla <[email protected]> Co-developed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8450: add GPR nodeSrinivas Kandagatla1-0/+40
Add Generic Packet Router (GPR) device node with ADSP services. Signed-off-by: Srinivas Kandagatla <[email protected]> Co-developed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sa8540p-ride: enable PCIe supportBrian Masney1-0/+53
Add the vreg_l11a, pcie3a, pcie3a_phy, and tlmm nodes that are necessary in order to get PCIe working on the QDrive3. This patch also increases the width of the ranges property for the PCIe switch that's found on this platform. Note that this change requires the latest trustzone (TZ) firmware that's available from Qualcomm as of November 2022. If this is used against a board with the older firmware, then the board will go into ramdump mode when PCIe is probed on startup. The ranges property is overridden in this sa8540p-ride.dts file since this is what's used to describe the QDrive3 variant with dual SoCs. There's another variant of this board that only has a single SoC where this change is not applicable, and hence why this specific change was not done in sa8540p.dtsi. These changes were derived from various patches that Qualcomm delivered to Red Hat in a downstream kernel. Signed-off-by: Brian Masney <[email protected]> Tested-by: Andrew Halaney <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6115: Add smmu fallback to qcom generic compatibleAdam Skladowski1-1/+1
Add fallback to generic qcom mmu-500 implementation. Signed-off-by: Adam Skladowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6115: Add WCN nodeAdam Skladowski1-0/+22
Add WCN node to allow using wifi module. Signed-off-by: Adam Skladowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6115: Add i2c/spi nodesAdam Skladowski1-0/+290
Add I2C/SPI nodes for SM6115. Signed-off-by: Adam Skladowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6115: Add GPI DMAAdam Skladowski1-0/+20
Add GPI DMA node which will be wired to i2c/spi/uart. Signed-off-by: Adam Skladowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6115: Add mdss/dpu nodeAdam Skladowski1-2/+185
Add mdss and dpu node to enable display support on SM6115. Signed-off-by: Adam Skladowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6115: Add dispcc nodeAdam Skladowski1-0/+14
Add display clock controller to allow controlling display related clocks. Signed-off-by: Adam Skladowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> [bjorn: Pushed dsi_phy reference into next patch] Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6115: Add rpm-stats nodeAdam Skladowski1-0/+5
Add rpm stats node. Signed-off-by: Adam Skladowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6115: Add PRNG nodeAdam Skladowski1-0/+7
Add a node for the PRNG to enable hw-accelerated pseudo-random number generation. Signed-off-by: Adam Skladowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6115: Add TSENS nodeAdam Skladowski1-0/+11
Add nodes required for TSENS block using the common qcom,tsens-v2 binding. Signed-off-by: Adam Skladowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6115: Add cpufreq-hw supportAdam Skladowski1-0/+19
Add cpufreq-hw node and assign qcom,freq-domain properties to CPUs to enable CPU clock scaling. Signed-off-by: Adam Skladowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: msm8916-wingtech-wt88047: Add flash LEDLin, Meng-Bo1-0/+22
WT88047 uses OCP 8110 Flash LED driver. Add it to the device tree. Signed-off-by: Lin, Meng-Bo <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: align LED node names with dtschemaKrzysztof Kozlowski3-3/+3
The node names should be generic and DT schema expects certain pattern: qcom/msm8998-oneplus-cheeseburger.dtb: leds: 'button-backlight' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' qcom/sc7180-trogdor-coachz-r1.dtb: pwmleds: 'keyboard-backlight' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: add SA8540P ride(Qdrive-3)Parikshit Pareek3-0/+295
Introduce the Qualcomm SA8540P ride automotive platform, also known as Qdrive-3 development board. This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh regulators, debug UART, PMICs, remoteprocs and USB. The SA8540P ride contains four PM8450 PMICs. A separate DTSI file has been created for PMIC, so that it can be used for future SA8540P based boards. Signed-off-by: Parikshit Pareek <[email protected]> Tested-by: Brian Masney <[email protected]> Reviewed-by: Brian Masney <[email protected]> Tested-by: Eric Chanudet <[email protected]> Reviewed-by: Eric Chanudet <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Johan Hovold <[email protected]> Tested-by: Andrew Halaney <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8450-nagara: Add gpio line names for TLMMKonrad Dybcio2-0/+426
Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the PDX223&224 DTSIs to better document the hardware. Diff between 223 and 224: < gpio-line-names = "NC", /* GPIO_0 */ < "NC", < "NC", < "NC", > gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */ > "TELE_SPI_MOSI", > "TELE_SPI_CLK", > "TELE_SPI_CS_N", < "PM8010_2_RESET_N", > "NC", < "NC", > "UWIDEC_PWR_EN", < "TOF_RST_N", > "NC" < "QLINK1_REQ", < "QLINK1_EN", /* GPIO_160 */ < "QLINK1_WMSS_RESET_N", > "NC", > "NC", /* GPIO_160 */ > "NC", The tele lens setup is different on 1 IV and 5 IV and power wiring is different for some lenses, so it makes sense. As for QLINK, no idea. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: msm8994: Drop spi-max-frequency from SPI hostKonrad Dybcio1-2/+0
This is a device property, not a bus host one. Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8450: Supply clock from cpufreq node to CPUsManivannan Sadhasivam1-0/+9
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks to the CPU cores. But this relationship is not represented in DTS so far. So let's make cpufreq node as the clock provider and CPU nodes as the consumers. The clock index for each CPU node is based on the frequency domain index. Signed-off-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add vision mezzanineBryan O'Donoghue3-0/+96
The Vision Mezzanine for the RB5 ships with an imx577 and ov9282 populated. Other sensors and components may be added or stacked with additional mezzanines. Enable the IMX577 on the vision mezzanine. An example media-ctl pipeline for the imx577 is: media-ctl --reset media-ctl -v -d /dev/media0 -V '"imx577 '22-001a'":0[fmt:SRGGB10/4056x3040 field:none]' media-ctl -V '"msm_csiphy2":0[fmt:SRGGB10/4056x3040]' media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]' media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]' media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8250: camss: Define ports and ports address/size cellsBryan O'Donoghue1-0/+29
Define the set of possible ports, one for each CSI PHY along with the port address and size cells @ the SoC dtsi level. Suggested-by: Konrad Dybcio <[email protected]> Suggested-by: Laurent Pinchart <[email protected]> Reviewed-by: Vladimir Zapolskiy <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add navigation ↵Bryan O'Donoghue3-96/+105
mezzanine dts Move the dts data for the rb3 navigation mezzanine into its own dts file. Suggested-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sdm845-db845c: Use okay not ok, disabled not disable for ↵Bryan O'Donoghue1-4/+2
status Use preferred "ok" not "okay". Use preferred status "disabled" instead of "disable". There's no functional change here so no Fixes has been applied. Reported-by: Konrad Dybcio <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sdm845-db845c: Drop redundant reg = in portBryan O'Donoghue1-1/+0
The reg for the port is specified in the dtsi. Remove from the db845c dts. Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sdm845-db845c: Drop redundant address-cells, size-cells ↵Bryan O'Donoghue1-2/+0
declaration sdm845.dtsi camss already defines the address-cells and size-cells for camss, no need to replicate in sdm845-db845c.dts. Reported-by: Konrad Dybcio <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sdm845: Define the number of available portsBryan O'Donoghue1-0/+16
The number of available ports is SoC specific so we should define it in the SoC dtsi. For the case of the sdm845 that is 4 CSI PHYs => four ports. Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bryan O'Donoghue <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8350-sagami: Wire up SDHCI2Konrad Dybcio1-1/+28
Adjust regulators, add required pin setup and finally enable SDHCI2 to get the SD Card slot going on Sagami Xperias. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8350-sagami: Add GPIO line names for TLMMKonrad Dybcio2-0/+409
Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the Sagami-common / PDX215 DTSIs to better document the hardware. Diff between 215 and common: < "NC", < "NC", > "WLC_I2C_SDA", > "WLC_I2C_SCL", < "NC", > "WLC_INT_N", > "CAM_MCLK4", < "NC", < "NC", > "TOF_RST_N", < "NC", < "NC", < "NC", > "QLINK1_REQ", > "QLINK1_EN", > "QLINK1_WMSS_RESET_N", It's pretty logical as 1 III has WLC (WireLess Charging), and an additional 3D iToF sensor. As for QLINK, no idea. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8350: Add SDHCI2Konrad Dybcio1-0/+79
Add and configure the SDHCI host responsible for (mostly) SD Card and its corresponding pins' sleep states. The setup is *literally* 1:1 with 8450 (bar SDR50/104 may not be broken). Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: clean up 'regulator-allowed-modes' indentationJohan Hovold8-66/+44
When recently adding the missing 'regulator-allowed-modes' properties it appears that the binding example with its four-spaces indentation (corresponding to a single tab, which is still to little) was copied verbatim. Drop the unnecessary first line break after 'regulator-allowed-modes' properties and indent the single remaining continuation line properly. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sc7280: Remove unused sleep pin control nodesSrinivasa Rao Mandadapu4-88/+0
Remove unused and redundant sleep pin control entries as they are not referenced anywhere in sc7280 based platform's device tree variants. Signed-off-by: Srinivasa Rao Mandadapu <[email protected]> Reported-by: Douglas Anderson <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: pmk8350: Specify PBS register for PONKonrad Dybcio1-1/+2
PMK8350 is the first PMIC to require both HLOS and PBS registers for PON to function properly (at least in theory, sm8350 sees no change). The support for it on the driver side has been added long ago, but it has never been wired up. Do so. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8150: Use defines for power domain indicesKonrad Dybcio1-6/+6
Use the defines from qcom-rpmpd.h instead of bare numbers for readability. Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm8450: Use defines for power domain indicesKonrad Dybcio1-2/+2
Use the defines from qcom-rpmpd.h instead of bare numbers for readability. Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6375-pdx225: Enable ADSP & CDSPKonrad Dybcio1-0/+10
Enable the newly added remote processors and assign them a firmware path. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6375: Add ADSP&CDSPKonrad Dybcio1-0/+73
Add ADSP & CDSP remote processors. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6375: Add SMP2P for ADSP&CDSPKonrad Dybcio1-0/+48
Add nodes for ADSP&CDSP SMP2P. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-12-06arm64: dts: qcom: sm6375-pdx225: Enable SD card slotKonrad Dybcio1-2/+31
Set SDHCI VMMC/VQMMC to <=2v96 and allow load setting by the SDHCI driver, as required by this use case. Configure the SD Card Detect pin, enable the SDHCI2 controller and assign it the aforementioned regulators. Signed-off-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.