| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The trusted OS may reject CPU_OFF calls to its resident CPU, so we must
avoid issuing those. We never migrate a Trusted OS and we already take
care to prevent CPU_OFF PSCI call. However, this is not reflected
explicitly to the userspace. Any user can attempt to hotplug trusted OS
resident CPU. The entire motion of going through the various state
transitions in the CPU hotplug state machine gets executed and the
PSCI layer finally refuses to make CPU_OFF call.
This results is unnecessary unwinding of CPU hotplug state machine in
the kernel. Instead we can mark the trusted OS resident CPU as not
available for hotplug, so that the user attempt or request to do the
same will get immediately rejected.
Cc: Mark Rutland <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
It seems that LLVM's linker does not correctly handle variable assignments
involving section positions that are updated during the SECTIONS
parsing. Commit aa69fb62bea1 ("arm64/efi: Mark __efistub_stext_offset as
an absolute symbol explicitly") ran into this too, but found a different
workaround.
However, this was not enough, as other variables were also miscalculated
which manifested as boot failures under UEFI where __efistub__end was
not taking the correct _end value (they should be the same):
$ ld.lld -EL -maarch64elf --no-undefined -X -shared \
-Bsymbolic -z notext -z norelro --no-apply-dynamic-relocs \
-o vmlinux.lld -T poc.lds --whole-archive vmlinux.o && \
readelf -Ws vmlinux.lld | egrep '\b(__efistub_|)_end\b'
368272: ffff000002218000 0 NOTYPE LOCAL HIDDEN 38 __efistub__end
368322: ffff000012318000 0 NOTYPE GLOBAL DEFAULT 38 _end
$ aarch64-linux-gnu-ld.bfd -EL -maarch64elf --no-undefined -X -shared \
-Bsymbolic -z notext -z norelro --no-apply-dynamic-relocs \
-o vmlinux.bfd -T poc.lds --whole-archive vmlinux.o && \
readelf -Ws vmlinux.bfd | egrep '\b(__efistub_|)_end\b'
338124: ffff000012318000 0 NOTYPE LOCAL DEFAULT ABS __efistub__end
383812: ffff000012318000 0 NOTYPE GLOBAL DEFAULT 15325 _end
To work around this, all of the __efistub_-prefixed variable assignments
need to be moved after the linker script's SECTIONS entry. As it turns
out, this also solves the problem fixed in commit aa69fb62bea1, so those
changes are reverted here.
Link: https://github.com/ClangBuiltLinux/linux/issues/634
Link: https://bugs.llvm.org/show_bug.cgi?id=42990
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Prior to commit:
14c127c957c1c607 ("arm64: mm: Flip kernel VA space")
... VA_START described the start of the TTBR1 address space for a given
VA size described by VA_BITS, where all kernel mappings began.
Since that commit, VA_START described a portion midway through the
address space, where the linear map ends and other kernel mappings
begin.
To avoid confusion, let's rename VA_START to PAGE_END, making it clear
that it's not the start of the TTBR1 address space and implying that
it's related to PAGE_OFFSET. Comments and other mnemonics are updated
accordingly, along with a typo fix in the decription of VMEMMAP_SIZE.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Catalin Marinas <[email protected]>
Tested-by: Steve Capper <[email protected]>
Reviewed-by: Steve Capper <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into for-next/cpu-topology
Pull in generic CPU topology changes from Paul Walmsley (RISC-V).
* tag 'common/for-v5.4-rc1/cpu-topology' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Add an entry for generic architecture topology
base: arch_topology: update Kconfig help description
RISC-V: Parse cpu topology during boot.
arm: Use common cpu_topology structure and functions.
cpu-topology: Move cpu topology code to common code.
dt-binding: cpu-topology: Move cpu-map to a common binding.
Documentation: DT: arm: add support for sockets defining package boundaries
|
|
All instances of struct sys64_hook contain compile-time constant data,
and are never inentionally modified, so let's make them all const.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
The aarch64_insn_encoding_class[] array contains compile-time constant
data, and is never intentionally modified, so let's mark it as const.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
The icache_policy_str[] array contains compile-time constant data, and
is never intentionally modified, so let's mark it as const.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
GCC unescapes escaped string section names while Clang does not. Because
__section uses the `#` stringification operator for the section name, it
doesn't need to be escaped.
This antipattern was found with:
$ grep -e __section\(\" -e __section__\(\" -r
Reported-by: Sedat Dilek <[email protected]>
Suggested-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
If a CPU doesn't support the page size for which the kernel is
configured, then we will complain and refuse to bring it online. For
secondary CPUs (and the boot CPU on a system booting with EFI), we will
also print an error identifying the mismatch.
Consequently, the only time that the cpufeature code can detect a
granule size mismatch is for a granule other than the one that is
currently being used. Although we would rather such systems didn't
exist, we've unfortunately lost that battle and Kevin reports that
on his amlogic S922X (odroid-n2 board) we end up warning and taining
with defconfig because 16k pages are not supported by all of the CPUs.
In such a situation, we don't actually care about the feature mismatch,
particularly now that KVM only exposes the sanitised view of the CPU
registers (commit 93390c0a1b20 - "arm64: KVM: Hide unsupported AArch64
CPU features from guests"). Treat the granule fields as non-strict and
let Kevin run without a tainted kernel.
Cc: Marc Zyngier <[email protected]>
Reported-by: Kevin Hilman <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Acked-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
[[email protected]: changelog updated with KVM sanitised regs commit]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
ACPI 6.3 adds a thread flag to represent if a CPU/PE is
actually a thread. Given that the MPIDR_MT bit may not
represent this information consistently on homogeneous machines
we should prefer the PPTT flag if its available.
Signed-off-by: Jeremy Linton <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Reviewed-by: Robert Richter <[email protected]>
[will: made acpi_cpu_is_threaded() return 'bool']
Signed-off-by: Will Deacon <[email protected]>
|
|
Pull kvm fixes from Paolo Bonzini:
"Bugfixes (arm and x86) and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Adding config fragments
KVM: selftests: Update gitignore file for latest changes
kvm: remove unnecessary PageReserved check
KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable
KVM: arm: Don't write junk to CP15 registers on reset
KVM: arm64: Don't write junk to sysregs on reset
KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block
x86: kvm: remove useless calls to kvm_para_available
KVM: no need to check return value of debugfs_create functions
KVM: remove kvm_arch_has_vcpu_debugfs()
KVM: Fix leak vCPU's VMCS value into other pCPU
KVM: Check preempted_in_kernel for involuntary preemption
KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire
arm64: KVM: hyp: debug-sr: Mark expected switch fall-through
KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC
KVM: arm: vgic-v3: Mark expected switch fall-through
arm64: KVM: regmap: Fix unexpected switch fall-through
KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index
|
|
Current PSCI code handles idle state entry through the
psci_cpu_suspend_enter() API, that takes an idle state index as a
parameter and convert the index into a previously initialized
power_state parameter before calling the PSCI.CPU_SUSPEND() with it.
This is unwieldly, since it forces the PSCI firmware layer to keep track
of power_state parameter for every idle state so that the
index->power_state conversion can be made in the PSCI firmware layer
instead of the CPUidle driver implementations.
Move the power_state handling out of drivers/firmware/psci
into the respective ACPI/DT PSCI CPUidle backends and convert
the psci_cpu_suspend_enter() API to get the power_state
parameter as input, which makes it closer to its firmware
interface PSCI.CPU_SUSPEND() API.
A notable side effect is that the PSCI ACPI/DT CPUidle backends
now can directly handle (and if needed update) power_state
parameters before handing them over to the PSCI firmware
interface to trigger PSCI.CPU_SUSPEND() calls.
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Allow selection of the PSCI CPUidle in the kernel by updating
the respective Kconfig entry.
Remove PSCI callbacks from ARM/ARM64 generic CPU ops
to prevent the PSCI idle driver from clashing with the generic
ARM CPUidle driver initialization, that relies on CPU ops
to initialize and enter idle states.
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Ulf Hansson <[email protected]>
Cc: Sudeep Holla <[email protected]>
Cc: Daniel Lezcano <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Previous patches have enabled 52-bit kernel + user VAs and there is no
longer any scenario where user VA != kernel VA size.
This patch removes the, now redundant, vabits_user variable and replaces
usage with vabits_actual where appropriate.
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Steve Capper <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Most of the machinery is now in place to enable 52-bit kernel VAs that
are detectable at boot time.
This patch adds a Kconfig option for 52-bit user and kernel addresses
and plumbs in the requisite CONFIG_ macros as well as sets TCR.T1SZ,
physvirt_offset and vmemmap at early boot.
To simplify things this patch also removes the 52-bit user/48-bit kernel
kconfig option.
Signed-off-by: Steve Capper <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
When running with a 52-bit userspace VA and a 48-bit kernel VA we offset
ttbr1_el1 to allow the kernel pagetables with a 52-bit PTRS_PER_PGD to
be used for both userspace and kernel.
Moving on to a 52-bit kernel VA we no longer require this offset to
ttbr1_el1 should we be running on a system with HW support for 52-bit
VAs.
This patch introduces conditional logic to offset_ttbr1 to query
SYS_ID_AA64MMFR2_EL1 whenever 52-bit VAs are selected. If there is HW
support for 52-bit VAs then the ttbr1 offset is skipped.
We choose to read a system register rather than vabits_actual because
offset_ttbr1 can be called in places where the kernel data is not
actually mapped.
Calls to offset_ttbr1 appear to be made from rarely called code paths so
this extra logic is not expected to adversely affect performance.
Signed-off-by: Steve Capper <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
In order to support 52-bit kernel addresses detectable at boot time, one
needs to know the actual VA_BITS detected. A new variable vabits_actual
is introduced in this commit and employed for the KVM hypervisor layout,
KASAN, fault handling and phys-to/from-virt translation where there
would normally be compile time constants.
In order to maintain performance in phys_to_virt, another variable
physvirt_offset is introduced.
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Steve Capper <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
In order to support 52-bit kernel addresses detectable at boot time, the
kernel needs to know the most conservative VA_BITS possible should it
need to fall back to this quantity due to lack of hardware support.
A new compile time constant VA_BITS_MIN is introduced in this patch and
it is employed in the KASAN end address, KASLR, and EFI stub.
For Arm, if 52-bit VA support is unavailable the fallback is to 48-bits.
In other words: VA_BITS_MIN = min (48, VA_BITS)
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Steve Capper <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
In order to allow for a KASAN shadow that changes size at boot time, one
must fix the KASAN_SHADOW_END for both 48 & 52-bit VAs and "grow" the
start address. Also, it is highly desirable to maintain the same
function addresses in the kernel .text between VA sizes. Both of these
requirements necessitate us to flip the kernel address space halves s.t.
the direct linear map occupies the lower addresses.
This patch puts the direct linear map in the lower addresses of the
kernel VA range and everything else in the higher ranges.
We need to adjust:
*) KASAN shadow region placement logic,
*) KASAN_SHADOW_OFFSET computation logic,
*) virt_to_phys, phys_to_virt checks,
*) page table dumper.
These are all small changes, that need to take place atomically, so they
are bundled into this commit.
As part of the re-arrangement, a guard region of 2MB (to preserve
alignment for fixed map) is added after the vmemmap. Otherwise the
vmemmap could intersect with IS_ERR pointers.
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Steve Capper <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
The ptrace trace SVE flags are prefixed with SVE_PT_*. Update the
comment accordingly.
Reviewed-by: Dave Martin <[email protected]>
Signed-off-by: Julien Grall <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
The commit d5370f754875 ("arm64: prefetch: add alternative pattern for
CPUs without a prefetcher") introduced MIDR_IS_CPU_MODEL_RANGE() to be
used in has_no_hw_prefetch() with rv_min=0 which generates a compilation
warning from GCC,
In file included from ./arch/arm64/include/asm/cache.h:8,
from ./include/linux/cache.h:6,
from ./include/linux/printk.h:9,
from ./include/linux/kernel.h:15,
from ./include/linux/cpumask.h:10,
from arch/arm64/kernel/cpufeature.c:11:
arch/arm64/kernel/cpufeature.c: In function 'has_no_hw_prefetch':
./arch/arm64/include/asm/cputype.h:59:26: warning: comparison of
unsigned expression >= 0 is always true [-Wtype-limits]
_model == (model) && rv >= (rv_min) && rv <= (rv_max); \
^~
arch/arm64/kernel/cpufeature.c:889:9: note: in expansion of macro
'MIDR_IS_CPU_MODEL_RANGE'
return MIDR_IS_CPU_MODEL_RANGE(midr, MIDR_THUNDERX,
^~~~~~~~~~~~~~~~~~~~~~~
Fix it by converting MIDR_IS_CPU_MODEL_RANGE to a static inline
function.
Signed-off-by: Qian Cai <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
It is not desirable to relax the ABI to allow tagged user addresses into
the kernel indiscriminately. This patch introduces a prctl() interface
for enabling or disabling the tagged ABI with a global sysctl control
for preventing applications from enabling the relaxed ABI (meant for
testing user-space prctl() return error checking without reconfiguring
the kernel). The ABI properties are inherited by threads of the same
application and fork()'ed children but cleared on execve(). A Kconfig
option allows the overall disabling of the relaxed ABI.
The PR_SET_TAGGED_ADDR_CTRL will be expanded in the future to handle
MTE-specific settings like imprecise vs precise exceptions.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
RELR is a relocation packing format for relative relocations.
The format is described in a generic-abi proposal:
https://groups.google.com/d/topic/generic-abi/bX460iggiKg/discussion
The LLD linker can be instructed to pack relocations in the RELR
format by passing the flag --pack-dyn-relocs=relr.
This patch adds a new config option, CONFIG_RELR. Enabling this option
instructs the linker to pack vmlinux's relative relocations in the RELR
format, and causes the kernel to apply the relocations at startup along
with the RELA relocations. RELA relocations still need to be applied
because the linker will emit RELA relative relocations if they are
unrepresentable in the RELR format (i.e. address not a multiple of 2).
Enabling CONFIG_RELR reduces the size of a defconfig kernel image
with CONFIG_RANDOMIZE_BASE by 3.5MB/16% uncompressed, or 550KB/5%
compressed (lz4).
Signed-off-by: Peter Collingbourne <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
The ESR.EC encoding of 0b011010 (0x1a) describes an exception generated
by an ERET, ERETAA or ERETAB instruction as a result of a nested
virtualisation trap to EL2.
Add an encoding for this EC and a string description so that we identify
it correctly if we take one unexpectedly.
Acked-by: Mark Rutland <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
In commit b6b2735514bc
("tracing: Use str_has_prefix() instead of using fixed sizes")
the newly introduced str_has_prefix() was used
to replace error-prone strncmp(str, const, len).
Here fix codes with the same pattern.
Signed-off-by: Chuhong Yuan <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
KEXEC_BUF_MEM_UNKNOWN
With commit b6664ba42f14 ("s390, kexec_file: drop arch_kexec_mem_walk()"),
we introduced the KEXEC_BUF_MEM_UNKNOWN macro. If kexec_buf.mem is set
to this value, kexec_locate_mem_hole() will try to allocate free memory.
While other arch(s) like s390 and x86_64 already use this macro to
initialize kexec_buf.mem with, arm64 uses an equivalent value of 0.
Replace it with KEXEC_BUF_MEM_UNKNOWN, to keep the convention of
initializing 'kxec_buf.mem' consistent across various archs.
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Matthias Brugger <[email protected]>
Signed-off-by: Bhupesh Sharma <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
kprobes manipulates the interrupted PSTATE for single step, and
doesn't restore it. Thus, if we put a kprobe where the pstate.D
(debug) masked, the mask will be cleared after the kprobe hits.
Moreover, in the most complicated case, this can lead a kernel
crash with below message when a nested kprobe hits.
[ 152.118921] Unexpected kernel single-step exception at EL1
When the 1st kprobe hits, do_debug_exception() will be called.
At this point, debug exception (= pstate.D) must be masked (=1).
But if another kprobes hits before single-step of the first kprobe
(e.g. inside user pre_handler), it unmask the debug exception
(pstate.D = 0) and return.
Then, when the 1st kprobe setting up single-step, it saves current
DAIF, mask DAIF, enable single-step, and restore DAIF.
However, since "D" flag in DAIF is cleared by the 2nd kprobe, the
single-step exception happens soon after restoring DAIF.
This has been introduced by commit 7419333fa15e ("arm64: kprobe:
Always clear pstate.D in breakpoint exception handler")
To solve this issue, this stores all DAIF bits and restore it
after single stepping.
Reported-by: Naresh Kamboju <[email protected]>
Fixes: 7419333fa15e ("arm64: kprobe: Always clear pstate.D in breakpoint exception handler")
Reviewed-by: James Morse <[email protected]>
Tested-by: James Morse <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Remove rcu_read_lock()/rcu_read_unlock() from debug exception
handlers since we are sure those are not preemptible and
interrupts are off.
Acked-by: Paul E. McKenney <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Prohibit probing on return_address() and subroutines which
is called from return_address(), since the it is invoked from
trace_hardirqs_off() which is also kprobe blacklisted.
Reported-by: Naresh Kamboju <[email protected]>
Signed-off-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have
their architecturally maximum values, which defeats the use of
FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous
machines.
Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively
saturate at zero.
Fixes: 3c739b571084 ("arm64: Keep track of CPU feature registers")
Cc: <[email protected]> # 4.4.x-
Reviewed-by: Suzuki K Poulose <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
When fall-through warnings was enabled by default the following warnings
was starting to show up:
../arch/arm64/kernel/module.c: In function ‘apply_relocate_add’:
../arch/arm64/kernel/module.c:316:19: warning: this statement may fall
through [-Wimplicit-fallthrough=]
overflow_check = false;
~~~~~~~~~~~~~~~^~~~~~~
../arch/arm64/kernel/module.c:317:3: note: here
case R_AARCH64_MOVW_UABS_G0:
^~~~
../arch/arm64/kernel/module.c:322:19: warning: this statement may fall
through [-Wimplicit-fallthrough=]
overflow_check = false;
~~~~~~~~~~~~~~~^~~~~~~
../arch/arm64/kernel/module.c:323:3: note: here
case R_AARCH64_MOVW_UABS_G1:
^~~~
Rework so that the compiler doesn't warn about fall-through.
Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning")
Signed-off-by: Anders Roxell <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
When fall-through warnings was enabled by default the following warning
was starting to show up:
In file included from ../include/linux/kernel.h:15,
from ../include/linux/list.h:9,
from ../include/linux/kobject.h:19,
from ../include/linux/of.h:17,
from ../include/linux/irqdomain.h:35,
from ../include/linux/acpi.h:13,
from ../arch/arm64/kernel/smp.c:9:
../arch/arm64/kernel/smp.c: In function ‘__cpu_up’:
../include/linux/printk.h:302:2: warning: this statement may fall
through [-Wimplicit-fallthrough=]
printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../arch/arm64/kernel/smp.c:156:4: note: in expansion of macro ‘pr_crit’
pr_crit("CPU%u: may not have shut down cleanly\n", cpu);
^~~~~~~
../arch/arm64/kernel/smp.c:157:3: note: here
case CPU_STUCK_IN_KERNEL:
^~~~
Rework so that the compiler doesn't warn about fall-through.
Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning")
Signed-off-by: Anders Roxell <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Now that -Wimplicit-fallthrough is passed to GCC by default, the kernel
build has suddenly got noisy. Annotate the two fall-through cases in our
hw_breakpoint implementation, since they are both intentional.
Reported-by: Anders Roxell <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Commit d968d2b801d8 ("ARM: 7497/1: hw_breakpoint: allow single-byte
watchpoints on all addresses") changed the validation requirements for
hardware watchpoints on arch/arm/. Update our compat layer to implement
the same relaxation.
Cc: <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
We've added two ESR exception classes for new ARM hardware extensions:
ESR_ELx_EC_PAC and ESR_ELx_EC_SVE, but failed to update the strings
used in tracing and other debug.
Let's update "kvm_arm_exception_class" for these two EC, which the
new EC will be visible to user-space via kvm_exit trace events
Also update to "esr_class_str" for ESR_ELx_EC_PAC, by which we can
get more readable debug info.
Cc: Marc Zyngier <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Dave Martin <[email protected]>
Reviewed-by: James Morse <[email protected]>
Signed-off-by: Zenghui Yu <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
|
|
ARMV8_EVENT_ATTR_RESOLVE became unused after commit <4b1a9e6934ec>
("arm64/perf: Filter common events based on PMCEIDn_EL0").
Remove it.
Cc: Will Deacon <[email protected]>
Cc: Mark Rutland <[email protected]>
Signed-off-by: Shaokun Zhang <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Both RISC-V & ARM64 are using cpu-map device tree to describe
their cpu topology. It's better to move the relevant code to
a common place instead of duplicate code.
To: Will Deacon <[email protected]>
To: Catalin Marinas <[email protected]>
Signed-off-by: Atish Patra <[email protected]>
[Tested on QDF2400]
Tested-by: Jeffrey Hugo <[email protected]>
[Tested on Juno and other embedded platforms.]
Tested-by: Sudeep Holla <[email protected]>
Reviewed-by: Sudeep Holla <[email protected]>
Acked-by: Will Deacon <[email protected]>
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Paul Walmsley <[email protected]>
|
|
Comparing the arm-arm's pseudocode for AArch64.PCAlignmentFault() with
AArch64.SPAlignmentFault() shows that SP faults don't copy the faulty-SP
to FAR_EL1, but this is where we read from, and the address we provide
to user-space with the BUS_ADRALN signal.
For user-space this value will be UNKNOWN due to the previous ERET to
user-space. If the last value is preserved, on systems with KASLR or KPTI
this will be the user-space link-register left in FAR_EL1 by tramp_exit().
Fix this to retrieve the original sp_el0 value, and pass this to
do_sp_pc_fault().
SP alignment faults from EL1 will cause us to take the fault again when
trying to store the pt_regs. This eventually takes us to the overflow
stack. Remove the ESR_ELx_EC_SP_ALIGN check as we will never make it
this far.
Fixes: 60ffc30d5652 ("arm64: Exception handling")
Signed-off-by: James Morse <[email protected]>
[will: change label name and fleshed out comment]
Signed-off-by: Will Deacon <[email protected]>
|
|
On a CPU that doesn't support SSBS, PSTATE[12] is RES0. In a system
where only some of the CPUs implement SSBS, we end-up losing track of
the SSBS bit across task migration.
To address this issue, let's force the SSBS bit on context switch.
Fixes: 8f04e8e6e29c ("arm64: ssbd: Add support for PSTATE.SSBS rather than trapping to EL3")
Signed-off-by: Marc Zyngier <[email protected]>
[will: inverted logic and added comments]
Signed-off-by: Will Deacon <[email protected]>
|
|
There are some hand-written instances of "32" to express the number
of SVE Z-registers.
Since this code was written a #define was added for this, so
convert trivial instances of this magic number as appropriate.
No functional change.
Reviewed-by: Julien Grall <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Signed-off-by: Dave Martin <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Currently we convert from FPSIMD to SVE register state in memory in
two places.
To ease future maintenance, let's consolidate this in one place.
Reviewed-by: Julien Grall <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Signed-off-by: Dave Martin <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
The arm64 stacktrace code is careful to only dereference frame records
in valid stack ranges, ensuring that a corrupted frame record won't
result in a faulting access.
However, it's still possible for corrupt frame records to result in
infinite loops in the stacktrace code, which is also undesirable.
This patch ensures that we complete a stacktrace in finite time, by
keeping track of which stacks we have already completed unwinding, and
verifying that if the next frame record is on the same stack, it is at a
higher address.
As this has turned out to be particularly subtle, comments are added to
explain the procedure.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: James Morse <[email protected]>
Tested-by: James Morse <[email protected]>
Acked-by: Dave Martin <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Cc: Tengfei Fan <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Some common code is required by each stacktrace user to initialise
struct stackframe before the first call to unwind_frame().
In preparation for adding to the common code, this patch factors it
out into a separate function start_backtrace(), and modifies the
stacktrace callers appropriately.
No functional change.
Signed-off-by: Dave Martin <[email protected]>
[Mark: drop tsk argument, update more callsites]
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: James Morse <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
The recent changes to the vdso library for arm64 and the introduction of
the compat vdso library have generated some misalignment in the
Makefiles.
Cleanup the Makefiles for vdso and vdso32 libraries:
* Removing unused rules.
* Unifying the displayed compilation messages.
* Simplifying the generic library inclusion path for
arm64 vdso.
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Vincenzo Frascino <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Running "make" on an already compiled kernel tree will rebuild the kernel
even without any modifications:
$ make ARCH=arm64 CROSS_COMPILE=/usr/bin/aarch64-unknown-linux-gnu-
arch/arm64/Makefile:58: CROSS_COMPILE_COMPAT not defined or empty, the compat vDSO will not be built
CALL scripts/checksyscalls.sh
CALL scripts/atomic/check-atomics.sh
VDSOCHK arch/arm64/kernel/vdso/vdso.so.dbg
VDSOSYM include/generated/vdso-offsets.h
CHK include/generated/compile.h
CC arch/arm64/kernel/signal.o
CC arch/arm64/kernel/vdso.o
CC arch/arm64/kernel/signal32.o
LD arch/arm64/kernel/vdso/vdso.so.dbg
OBJCOPY arch/arm64/kernel/vdso/vdso.so
AS arch/arm64/kernel/vdso/vdso.o
AR arch/arm64/kernel/vdso/built-in.a
AR arch/arm64/kernel/built-in.a
GEN .version
CHK include/generated/compile.h
UPD include/generated/compile.h
CC init/version.o
AR init/built-in.a
LD vmlinux.o
This is the same bug fixed in commit 92a4728608a8 ("x86/boot: Fix
if_changed build flip/flop bug"). We cannot use two "if_changed" in one
target. Fix this build bug by merging two commands into one function.
Fixes: a7f71a2c8903 ("arm64: compat: Add vDSO")
Fixes: 28b1a824a4f4 ("arm64: vdso: Substitute gettimeofday() with C implementation")
Reviewed-by: Masahiro Yamada <[email protected]>
Reviewed-by: Vincenzo Frascino <[email protected]>
Tested-by: Vincenzo Frascino <[email protected]>
Co-developed-by: Vincenzo Frascino <[email protected]>
Signed-off-by: Vincenzo Frascino <[email protected]>
Signed-off-by: Naohiro Aota <[email protected]>
[will: merged in compat fix from Vincenzo and made rule names consistent]
Signed-off-by: Will Deacon <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- match the directory structure of the linux-libc-dev package to that
of Debian-based distributions
- fix incorrect include/config/auto.conf generation when Kconfig
creates it along with the .config file
- remove misleading $(AS) from documents
- clean up precious tag files by distclean instead of mrproper
- add a new coccinelle patch for devm_platform_ioremap_resource
migration
- refactor module-related scripts to read modules.order instead of
$(MODVERDIR)/*.mod files to get the list of created modules
- remove MODVERDIR
- update list of header compile-test
- add -fcf-protection=none flag to avoid conflict with the retpoline
flags when CONFIG_RETPOLINE=y
- misc cleanups
* tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
kbuild: add -fcf-protection=none when using retpoline flags
kbuild: update compile-test header list for v5.3-rc1
kbuild: split out *.mod out of {single,multi}-used-m rules
kbuild: remove 'prepare1' target
kbuild: remove the first line of *.mod files
kbuild: create *.mod with full directory path and remove MODVERDIR
kbuild: export_report: read modules.order instead of .tmp_versions/*.mod
kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod
kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod
kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod
scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver
kbuild: remove duplication from modules.order in sub-directories
kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin}
kbuild: do not create empty modules.order in the prepare stage
coccinelle: api: add devm_platform_ioremap_resource script
kbuild: compile-test headers listed in header-test-m as well
kbuild: remove unused hostcc-option
kbuild: remove tag files by distclean instead of mrproper
kbuild: add --hash-style= and --build-id unconditionally
kbuild: get rid of misleading $(AS) from documents
...
|
|
As commit 1e0221374e30 ("mips: vdso: drop unnecessary cc-ldoption")
explained, these flags are supported by the minimal required version
of binutils. They are supported by ld.lld too.
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull rst conversion of docs from Mauro Carvalho Chehab:
"As agreed with Jon, I'm sending this big series directly to you, c/c
him, as this series required a special care, in order to avoid
conflicts with other trees"
* tag 'docs/v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (77 commits)
docs: kbuild: fix build with pdf and fix some minor issues
docs: block: fix pdf output
docs: arm: fix a breakage with pdf output
docs: don't use nested tables
docs: gpio: add sysfs interface to the admin-guide
docs: locking: add it to the main index
docs: add some directories to the main documentation index
docs: add SPDX tags to new index files
docs: add a memory-devices subdir to driver-api
docs: phy: place documentation under driver-api
docs: serial: move it to the driver-api
docs: driver-api: add remaining converted dirs to it
docs: driver-api: add xilinx driver API documentation
docs: driver-api: add a series of orphaned documents
docs: admin-guide: add a series of orphaned documents
docs: cgroup-v1: add it to the admin-guide book
docs: aoe: add it to the driver-api book
docs: add some documentation dirs to the driver-api book
docs: driver-model: move it to the driver-api book
docs: lp855x-driver.rst: add it to the driver-api book
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration changes:
- Evaluate PCI Boot Configuration _DSM to learn if firmware wants us
to preserve its resource assignments (Benjamin Herrenschmidt)
- Simplify resource distribution (Nicholas Johnson)
- Decode 32 GT/s link speed (Gustavo Pimentel)
Virtualization:
- Fix incorrect caching of VF config space size (Alex Williamson)
- Fix VF driver probing sysfs knobs (Alex Williamson)
Peer-to-peer DMA:
- Fix dma_virt_ops check (Logan Gunthorpe)
Altera host bridge driver:
- Allow building as module (Ley Foon Tan)
Armada 8K host bridge driver:
- add PHYs support (Miquel Raynal)
DesignWare host bridge driver:
- Export APIs to support removable loadable module (Vidya Sagar)
- Enable Relaxed Ordering erratum workaround only on Tegra20 &
Tegra30 (Vidya Sagar)
Hyper-V host bridge driver:
- Fix use-after-free in eject (Dexuan Cui)
Mobiveil host bridge driver:
- Clean up and fix many issues, including non-identify mapped
windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou
Zhiqiang)
Qualcomm host bridge driver:
- Use clk bulk API for 2.4.0 controllers (Bjorn Andersson)
- Add QCS404 support (Bjorn Andersson)
- Assert PERST for at least 100ms (Niklas Cassel)
R-Car host bridge driver:
- Add r8a774a1 DT support (Biju Das)
Tegra host bridge driver:
- Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol
details) AER, GPIO-based PERST# (Manikanta Maddireddy)
- Fix many issues, including power-on failure cases, interrupt
masking in suspend, UPHY settings, AFI dynamic clock gating,
pending DLL transactions (Manikanta Maddireddy)
Xilinx host bridge driver:
- Fix NWL Multi-MSI programming (Bharat Kumar Gogada)
Endpoint support:
- Fix 64bit BAR support (Alan Mikhak)
- Fix pcitest build issues (Alan Mikhak, Andy Shevchenko)
Bug fixes:
- Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu)
- Fix NVIDIA GPU HDA enablement issue (Lukas Wunner)
- Ignore lockdep for sysfs "remove" (Marek Vasut)
Misc:
- Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)"
* tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits)
PCI: Enable NVIDIA HDA controllers
tools: PCI: Fix installation when `make tools/pci_install`
PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB
PCI: Fix typos and whitespace errors
PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr()
PCI: mobiveil: Fix infinite-loop in the INTx handling function
PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine
PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window
PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window
PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup
PCI: mobiveil: Clear the control fields before updating it
PCI: mobiveil: Add configured inbound windows counter
PCI: mobiveil: Fix the valid check for inbound and outbound windows
PCI: mobiveil: Clean-up program_{ib/ob}_windows()
PCI: mobiveil: Remove an unnecessary return value check
PCI: mobiveil: Fix error return values
PCI: mobiveil: Refactor the MEM/IO outbound window initialization
PCI: mobiveil: Make some register updates more readable
PCI: mobiveil: Reformat the code for readability
dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional
...
|
|
Converts ARM the text files to ReST, preparing them to be an
architecture book.
The conversion is actually:
- add blank lines and identation in order to identify paragraphs;
- fix tables markups;
- add some lists markups;
- mark literal blocks;
- adjust title markups.
At its new index.rst, let's add a :orphan: while this is not linked to
the main index.rst file, in order to avoid build warnings.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Reviewed-by Corentin Labbe <[email protected]> # For sun4i-ss
|