| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Expose tag address bits in siginfo. The original arm64 ABI did not
expose any of the bits 63:56 of a tagged address in siginfo. In the
presence of user ASAN or MTE, this information may be useful. The
implementation is generic to other architectures supporting tags
(like SPARC ADI, subject to wiring up the arch code). The user will
have to opt in via sigaction(SA_EXPOSE_TAGBITS) so that the extra
bits, if available, become visible in si_addr.
- Default to 32-bit wide ZONE_DMA. Previously, ZONE_DMA was set to the
lowest 1GB to cope with the Raspberry Pi 4 limitations, to the
detriment of other platforms. With these changes, the kernel scans
the Device Tree dma-ranges and the ACPI IORT information before
deciding on a smaller ZONE_DMA.
- Strengthen READ_ONCE() to acquire when CONFIG_LTO=y. When building
with LTO, there is an increased risk of the compiler converting an
address dependency headed by a READ_ONCE() invocation into a control
dependency and consequently allowing for harmful reordering by the
CPU.
- Add CPPC FFH support using arm64 AMU counters.
- set_fs() removal on arm64. This renders the User Access Override
(UAO) ARMv8 feature unnecessary.
- Perf updates: PMU driver for the ARM DMC-620 memory controller, sysfs
identifier file for SMMUv3, stop event counters support for i.MX8MP,
enable the perf events-based hard lockup detector.
- Reorganise the kernel VA space slightly so that 52-bit VA
configurations can use more virtual address space.
- Improve the robustness of the arm64 memory offline event notifier.
- Pad the Image header to 64K following the EFI header definition
updated recently to increase the section alignment to 64K.
- Support CONFIG_CMDLINE_EXTEND on arm64.
- Do not use tagged PC in the kernel (TCR_EL1.TBID1==1), freeing up 8
bits for PtrAuth.
- Switch to vmapped shadow call stacks.
- Miscellaneous clean-ups.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (78 commits)
perf/imx_ddr: Add system PMU identifier for userspace
bindings: perf: imx-ddr: add compatible string
arm64: Fix build failure when HARDLOCKUP_DETECTOR_PERF is enabled
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mark __system_matches_cap as __maybe_unused
arm64: uaccess: remove vestigal UAO support
arm64: uaccess: remove redundant PAN toggling
arm64: uaccess: remove addr_limit_user_check()
arm64: uaccess: remove set_fs()
arm64: uaccess cleanup macro naming
arm64: uaccess: split user/kernel routines
arm64: uaccess: refactor __{get,put}_user
arm64: uaccess: simplify __copy_user_flushcache()
arm64: uaccess: rename privileged uaccess routines
arm64: sdei: explicitly simulate PAN/UAO entry
arm64: sdei: move uaccess logic to arch/arm64/
arm64: head.S: always initialize PSTATE
arm64: head.S: cleanup SCTLR_ELx initialization
arm64: head.S: rename el2_setup -> init_kernel_el
arm64: add C wrappers for SET_PSTATE_*()
...
|
|
* arm64/for-next/fixes: (26 commits)
arm64: mte: fix prctl(PR_GET_TAGGED_ADDR_CTRL) if TCF0=NONE
arm64: mte: Fix typo in macro definition
arm64: entry: fix EL1 debug transitions
arm64: entry: fix NMI {user, kernel}->kernel transitions
arm64: entry: fix non-NMI kernel<->kernel transitions
arm64: ptrace: prepare for EL1 irq/rcu tracking
arm64: entry: fix non-NMI user<->kernel transitions
arm64: entry: move el1 irq/nmi logic to C
arm64: entry: prepare ret_to_user for function call
arm64: entry: move enter_from_user_mode to entry-common.c
arm64: entry: mark entry code as noinstr
arm64: mark idle code as noinstr
arm64: syscall: exit userspace before unmasking exceptions
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
arm64: pgtable: Fix pte_accessible()
ACPI/IORT: Fix doc warnings in iort.c
arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
arm64: cpu_errata: Apply Erratum 845719 to KRYO2XX Silver
arm64: proton-pack: Add KRYO2XX silver CPUs to spectre-v2 safe-list
arm64: kpti: Add KRYO2XX gold/silver CPU cores to kpti safelist
...
# Conflicts:
# arch/arm64/include/asm/exception.h
# arch/arm64/kernel/sdei.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I'm sad to say that we've got an unusually large arm64 fixes pull for
rc7 which addresses numerous significant instrumentation issues with
our entry code.
Without these patches, lockdep is hopelessly unreliable in some
configurations [1,2] and syzkaller is therefore not a lot of use
because it's so noisy.
Although much of this has always been broken, it appears to have been
exposed more readily by other changes such as 044d0d6de9f5 ("lockdep:
Only trace IRQ edges") and general lockdep improvements around IRQ
tracing and NMIs.
Fixing this properly required moving much of the instrumentation hooks
from our entry assembly into C, which Mark has been working on for the
last few weeks. We're not quite ready to move to the recently added
generic functions yet, but the code here has been deliberately written
to mimic that closely so we can look at cleaning things up once we
have a bit more breathing room.
Having said all that, the second version of these patches was posted
last week and I pushed it into our CI (kernelci and cki) along with a
commit which forced on PROVE_LOCKING, NOHZ_FULL and
CONTEXT_TRACKING_FORCE. The result? We found a real bug in the
md/raid10 code [3].
Oh, and there's also a really silly typo patch that's unrelated.
Summary:
- Fix numerous issues with instrumentation and exception entry
- Fix hideous typo in unused register field definition"
[1] https://lore.kernel.org/r/CACT4Y+aAzoJ48Mh1wNYD17pJqyEcDnrxGfApir=-j171TnQXhw@mail.gmail.com
[2] https://lore.kernel.org/r/[email protected]
[3] https://lore.kernel.org/r/[email protected]
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Fix typo in macro definition
arm64: entry: fix EL1 debug transitions
arm64: entry: fix NMI {user, kernel}->kernel transitions
arm64: entry: fix non-NMI kernel<->kernel transitions
arm64: ptrace: prepare for EL1 irq/rcu tracking
arm64: entry: fix non-NMI user<->kernel transitions
arm64: entry: move el1 irq/nmi logic to C
arm64: entry: prepare ret_to_user for function call
arm64: entry: move enter_from_user_mode to entry-common.c
arm64: entry: mark entry code as noinstr
arm64: mark idle code as noinstr
arm64: syscall: exit userspace before unmasking exceptions
|
|
Now that the uaccess primitives dont take addr_limit into account, we
have no need to manipulate this via set_fs() and get_fs(). Remove
support for these, along with some infrastructure this renders
redundant.
We no longer need to flip UAO to access kernel memory under KERNEL_DS,
and head.S unconditionally clears UAO for all kernel configurations via
an ERET in init_kernel_el. Thus, we don't need to dynamically flip UAO,
nor do we need to context-switch it. However, we still need to adjust
PAN during SDEI entry.
Masking of __user pointers no longer needs to use the dynamic value of
addr_limit, and can use a constant derived from the maximum possible
userspace task size. A new TASK_SIZE_MAX constant is introduced for
this, which is also used by core code. In configurations supporting
52-bit VAs, this may include a region of unusable VA space above a
48-bit TTBR0 limit, but never includes any portion of TTBR1.
Note that TASK_SIZE_MAX is an exclusive limit, while USER_DS and
KERNEL_DS were inclusive limits, and is converted to a mask by
subtracting one.
As the SDEI entry code repurposes the otherwise unnecessary
pt_regs::orig_addr_limit field to store the TTBR1 of the interrupted
context, for now we rename that to pt_regs::sdei_ttbr1. In future we can
consider factoring that out.
Signed-off-by: Mark Rutland <[email protected]>
Acked-by: James Morse <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
For consistency, all tasks have a pt_regs reserved at the highest
portion of their task stack. Among other things, this ensures that a
task's SP is always pointing within its stack rather than pointing
immediately past the end.
While it is never legitimate to ERET from a kthread, we take pains to
initialize pt_regs for kthreads as if this were legitimate. As this is
never legitimate, the effects of an erroneous return are rarely tested.
Let's simplify things by initializing a kthread's pt_regs such that an
ERET is caught as an illegal exception return, and removing the explicit
initialization of other exception context. Note that as
spectre_v4_enable_task_mitigation() only manipulates the PSTATE within
the unused regs this is safe to remove.
As user tasks will have their exception context initialized via
start_thread() or start_compat_thread(), this should only impact cases
where something has gone very wrong and we'd like that to be clearly
indicated.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: James Morse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Core code disables RCU when calling arch_cpu_idle(), so it's not safe
for arch_cpu_idle() or its calees to be instrumented, as the
instrumentation callbacks may attempt to use RCU or other features which
are unsafe to use in this context.
Mark them noinstr to prevent issues.
The use of local_irq_enable() in arch_cpu_idle() is similarly
problematic, and the "sched/idle: Fix arch_cpu_idle() vs tracing" patch
queued in the tip tree addresses that case.
Reported-by: Marco Elver <[email protected]>
Signed-off-by: Mark Rutland <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: James Morse <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two more places which invoke tracing from RCU disabled regions in the
idle path.
Similar to the entry path the low level idle functions have to be
non-instrumentable"
* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Fix intel_idle() vs tracing
sched/idle: Fix arch_cpu_idle() vs tracing
|
|
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)
Reported-by: Sven Schnelle <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Mark Rutland <[email protected]>
Tested-by: Mark Rutland <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
In a surprising turn of events, it transpires that CPU capabilities
configured as ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE are never set as the
result of late-onlining. Therefore our handling of erratum 1418040 does
not get activated if it is not required by any of the boot CPUs, even
though we allow late-onlining of an affected CPU.
In order to get things working again, replace the cpus_have_const_cap()
invocation with an explicit check for the current CPU using
this_cpu_has_cap().
Cc: Sai Prakash Ranjan <[email protected]>
Cc: Stephen Boyd <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Mark Rutland <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add userspace support for the Memory Tagging Extension introduced by
Armv8.5.
(Catalin Marinas and others)
* for-next/mte: (30 commits)
arm64: mte: Fix typo in memory tagging ABI documentation
arm64: mte: Add Memory Tagging Extension documentation
arm64: mte: Kconfig entry
arm64: mte: Save tags when hibernating
arm64: mte: Enable swap of tagged pages
mm: Add arch hooks for saving/restoring tags
fs: Handle intra-page faults in copy_mount_options()
arm64: mte: ptrace: Add NT_ARM_TAGGED_ADDR_CTRL regset
arm64: mte: ptrace: Add PTRACE_{PEEK,POKE}MTETAGS support
arm64: mte: Allow {set,get}_tagged_addr_ctrl() on non-current tasks
arm64: mte: Restore the GCR_EL1 register after a suspend
arm64: mte: Allow user control of the generated random tags via prctl()
arm64: mte: Allow user control of the tag check mode via prctl()
mm: Allow arm64 mmap(PROT_MTE) on RAM-based files
arm64: mte: Validate the PROT_MTE request via arch_validate_flags()
mm: Introduce arch_validate_flags()
arm64: mte: Add PROT_MTE support to mmap() and mprotect()
mm: Introduce arch_calc_vm_flag_bits()
arm64: mte: Tags-aware aware memcmp_pages() implementation
arm64: Avoid unnecessary clear_user_page() indirection
...
|
|
The PR_SPEC_DISABLE_NOEXEC option to the PR_SPEC_STORE_BYPASS prctl()
allows the SSB mitigation to be enabled only until the next execve(),
at which point the state will revert back to PR_SPEC_ENABLE and the
mitigation will be disabled.
Add support for PR_SPEC_DISABLE_NOEXEC on arm64.
Reported-by: Anthony Steinhauser <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Rewrite the Spectre-v4 mitigation handling code to follow the same
approach as that taken by Spectre-v2.
For now, report to KVM that the system is vulnerable (by forcing
'ssbd_state' to ARM64_SSBD_UNKNOWN), as this will be cleared up in
subsequent steps.
Signed-off-by: Will Deacon <[email protected]>
|
|
In preparation for ptrace() access to the prctl() value, allow calling
these functions on non-current tasks.
Signed-off-by: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
|
|
The IRG, ADDG and SUBG instructions insert a random tag in the resulting
address. Certain tags can be excluded via the GCR_EL1.Exclude bitmap
when, for example, the user wants a certain colour for freed buffers.
Since the GCR_EL1 register is not accessible at EL0, extend the
prctl(PR_SET_TAGGED_ADDR_CTRL) interface to include a 16-bit field in
the first argument for controlling which tags can be generated by the
above instruction (an include rather than exclude mask). Note that by
default all non-zero tags are excluded. This setting is per-thread.
Signed-off-by: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
|
|
By default, even if PROT_MTE is set on a memory range, there is no tag
check fault reporting (SIGSEGV). Introduce a set of option to the
exiting prctl(PR_SET_TAGGED_ADDR_CTRL) to allow user control of the tag
check fault mode:
PR_MTE_TCF_NONE - no reporting (default)
PR_MTE_TCF_SYNC - synchronous tag check fault reporting
PR_MTE_TCF_ASYNC - asynchronous tag check fault reporting
These options translate into the corresponding SCTLR_EL1.TCF0 bitfield,
context-switched by the kernel. Note that the kernel accesses to the
user address space (e.g. read() system call) are not checked if the user
thread tag checking mode is PR_MTE_TCF_NONE or PR_MTE_TCF_ASYNC. If the
tag checking mode is PR_MTE_TCF_SYNC, the kernel makes a best effort to
check its user address accesses, however it cannot always guarantee it.
Signed-off-by: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
|
|
The Memory Tagging Extension has two modes of notifying a tag check
fault at EL0, configurable through the SCTLR_EL1.TCF0 field:
1. Synchronous raising of a Data Abort exception with DFSC 17.
2. Asynchronous setting of a cumulative bit in TFSRE0_EL1.
Add the exception handler for the synchronous exception and handling of
the asynchronous TFSRE0_EL1.TF0 bit setting via a new TIF flag in
do_notify_resume().
On a tag check failure in user-space, whether synchronous or
asynchronous, a SIGSEGV will be raised on the faulting thread.
Signed-off-by: Vincenzo Frascino <[email protected]>
Co-developed-by: Catalin Marinas <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
|
|
Remove trace_cpu_idle() from the arch_cpu_idle() implementations and
put it in the generic code, right before disabling RCU. Gets rid of
more trace_*_rcuidle() users.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Steven Rostedt (VMware) <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Tested-by: Marco Elver <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Instead of dealing with erratum 1418040 on each entry and exit,
let's move the handling to __switch_to() instead, which has
several advantages:
- It can be applied when it matters (switching between 32 and 64
bit tasks).
- It is written in C (yay!)
- It can rely on static keys rather than alternatives
Signed-off-by: Marc Zyngier <[email protected]>
Tested-by: Sai Prakash Ranjan <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Acked-by: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that only
tls is copied here. This finishes an outstanding chunk of internal process
creation work since we've added clone3().
Cc: [email protected]
Acked-by: Thomas Bogendoerfer <[email protected]>A
Acked-by: Stafford Horne <[email protected]>
Acked-by: Greentime Hu <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>A
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Add log level argument to dump_backtrace() as a preparation for
introducing show_stack_loglvl().
[1]: https://lore.kernel.org/lkml/[email protected]/T/#u
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Russell King <[email protected]>
Cc: Will Deacon <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Merge in user support for Branch Target Identification, which narrowly
missed the cut for 5.7 after a late ABI concern.
* for-next/bti-user:
arm64: bti: Document behaviour for dynamically linked binaries
arm64: elf: Fix allnoconfig kernel build with !ARCH_USE_GNU_PROPERTY
arm64: BTI: Add Kconfig entry for userspace BTI
mm: smaps: Report arm64 guarded pages in smaps
arm64: mm: Display guarded pages in ptdump
KVM: arm64: BTI: Reset BTYPE when skipping emulated instructions
arm64: BTI: Reset BTYPE when skipping emulated instructions
arm64: traps: Shuffle code to eliminate forward declarations
arm64: unify native/compat instruction skipping
arm64: BTI: Decode BYTPE bits when printing PSTATE
arm64: elf: Enable BTI at exec based on ELF program properties
elf: Allow arch to tweak initial mmap prot flags
arm64: Basic Branch Target Identification support
ELF: Add ELF program property parsing support
ELF: UAPI and Kconfig additions for ELF program properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The bulk is in-kernel pointer authentication, activity monitors and
lots of asm symbol annotations. I also queued the sys_mremap() patch
commenting the asymmetry in the address untagging.
Summary:
- In-kernel Pointer Authentication support (previously only offered
to user space).
- ARM Activity Monitors (AMU) extension support allowing better CPU
utilisation numbers for the scheduler (frequency invariance).
- Memory hot-remove support for arm64.
- Lots of asm annotations (SYM_*) in preparation for the in-kernel
Branch Target Identification (BTI) support.
- arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
PMU init callbacks, support for new DT compatibles.
- IPv6 header checksum optimisation.
- Fixes: SDEI (software delegated exception interface) double-lock on
hibernate with shared events.
- Minor clean-ups and refactoring: cpu_ops accessor,
cpu_do_switch_mm() converted to C, cpufeature finalisation helper.
- sys_mremap() comment explaining the asymmetric address untagging
behaviour"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
mm/mremap: Add comment explaining the untagging behaviour of mremap()
arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
arm64: Introduce get_cpu_ops() helper function
arm64: Rename cpu_read_ops() to init_cpu_ops()
arm64: Declare ACPI parking protocol CPU operation if needed
arm64: move kimage_vaddr to .rodata
arm64: use mov_q instead of literal ldr
arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
lkdtm: arm64: test kernel pointer authentication
arm64: compile the kernel with ptrauth return address signing
kconfig: Add support for 'as-option'
arm64: suspend: restore the kernel ptrauth keys
arm64: __show_regs: strip PAC from lr in printk
arm64: unwind: strip PAC from kernel addresses
arm64: mask PAC bits of __builtin_return_address
arm64: initialize ptrauth keys for kernel booting task
arm64: initialize and switch ptrauth kernel keys
arm64: enable ptrauth earlier
arm64: cpufeature: handle conflicts based on capability
arm64: cpufeature: Move cpu capability helpers inside C file
...
|
|
Use `reboot_cpu` variable instead of hardcoding 0 as the reboot cpu in
machine_shutdown().
Signed-off-by: Qais Yousef <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
disable_nonboot_cpus() is not safe to use when doing machine_down(),
because it relies on freeze_secondary_cpus() which in turn is
a suspend/resume related freeze and could abort if the logic detects any
pending activities that can prevent finishing the offlining process.
Beside disable_nonboot_cpus() is dependent on CONFIG_PM_SLEEP_SMP which
is an othogonal config to rely on to ensure this function works
correctly.
Signed-off-by: Qais Yousef <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
For dynamically linked binaries the interpreter is responsible for setting
PROT_BTI on everything except itself. The dynamic linker needs to be aware
of PROT_BTI, for example in order to avoid dropping that when marking
executable pages read only after doing relocations, and doing everything
in userspace ensures that we don't get any issues due to divergences in
behaviour between the kernel and dynamic linker within a single executable.
Add a comment indicating that this is intentional to the code to help
people trying to understand what's going on.
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
lr is printed with %pS which will try to find an entry in kallsyms.
After enabling pointer authentication, this match will fail due to
PAC present in the lr.
Strip PAC from the lr to display the correct symbol name.
Suggested-by: James Morse <[email protected]>
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Reviewed-by: Vincenzo Frascino <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Set up keys to use pointer authentication within the kernel. The kernel
will be compiled with APIAKey instructions, the other keys are currently
unused. Each task is given its own APIAKey, which is initialized during
fork. The key is changed during context switch and on kernel entry from
EL0.
The keys for idle threads need to be set before calling any C functions,
because it is not possible to enter and exit a function with different
keys.
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Reviewed-by: Vincenzo Frascino <[email protected]>
Signed-off-by: Kristina Martsenko <[email protected]>
[Amit: Modified secondary cores key structure, comments]
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
As we're going to enable pointer auth within the kernel and use a
different APIAKey for the kernel itself, so move the user APIAKey
switch to EL0 exception return.
The other 4 keys could remain switched during task switch, but are also
moved to keep things consistent.
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: James Morse <[email protected]>
Reviewed-by: Vincenzo Frascino <[email protected]>
Signed-off-by: Kristina Martsenko <[email protected]>
[Amit: commit msg, re-positioned the patch, comments]
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The current code to print PSTATE symbolically when generating
backtraces etc., does not include the BYTPE field used by Branch
Target Identification.
So, decode BYTPE and print it too.
In the interests of human-readability, print the classes of BTI
matched. The symbolic notation, BYTPE (PSTATE[11:10]) and
permitted classes of subsequent instruction are:
-- (BTYPE=0b00): any insn
jc (BTYPE=0b01): BTI jc, BTI j, BTI c, PACIxSP
-c (BYTPE=0b10): BTI jc, BTI c, PACIxSP
j- (BTYPE=0b11): BTI jc, BTI j
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Dave Martin <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
For BTI protection to be as comprehensive as possible, it is
desirable to have BTI enabled from process startup. If this is not
done, the process must use mprotect() to enable BTI for each of its
executable mappings, but this is painful to do in the libc startup
code. It's simpler and more sound to have the kernel do it
instead.
To this end, detect BTI support in the executable (or ELF
interpreter, as appropriate), via the
NT_GNU_PROGRAM_PROPERTY_TYPE_0 note, and tweak the initial prot
flags for the process' executable pages to include PROT_BTI as
appropriate.
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Dave Martin <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
When all CPUs in the system implement the SSBS extension, the SSBS field
in PSTATE is the definitive indication of the mitigation state. Further,
when the CPUs implement the SSBS manipulation instructions (advertised
to userspace via an HWCAP), EL0 can toggle the SSBS field directly and
so we cannot rely on any shadow state such as TIF_SSBD at all.
Avoid forcing the SSBS field in context-switch on such a system, and
simply rely on the PSTATE register instead.
Cc: <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Srinivas Ramana <[email protected]>
Fixes: cbdf8a189a66 ("arm64: Force SSBS on context switch")
Reviewed-by: Marc Zyngier <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Use shared sysctl variables for zero and one constants, as in
commit eec4844fae7c ("proc/sysctl: add shared variables for range check")
Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI")
Signed-off-by: Matteo Croce <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The changes are a real mixed bag this time around.
The only scary looking one from the diffstat is the uapi change to
asm-generic/mman-common.h, but this has been acked by Arnd and is
actually just adding a pair of comments in an attempt to prevent
allocation of some PROT values which tend to get used for
arch-specific purposes. We'll be using them for Branch Target
Identification (a CFI-like hardening feature), which is currently
under review on the mailing list.
New architecture features:
- Support for Armv8.5 E0PD, which benefits KASLR in the same way as
KPTI but without the overhead. This allows KPTI to be disabled on
CPUs that are not affected by Meltdown, even is KASLR is enabled.
- Initial support for the Armv8.5 RNG instructions, which claim to
provide access to a high bandwidth, cryptographically secure
hardware random number generator. As well as exposing these to
userspace, we also use them as part of the KASLR seed and to seed
the crng once all CPUs have come online.
- Advertise a bunch of new instructions to userspace, including
support for Data Gathering Hint, Matrix Multiply and 16-bit
floating point.
Kexec:
- Cleanups in preparation for relocating with the MMU enabled
- Support for loading crash dump kernels with kexec_file_load()
Perf and PMU drivers:
- Cleanups and non-critical fixes for a couple of system PMU drivers
FPU-less (aka broken) CPU support:
- Considerable fixes to support CPUs without the FP/SIMD extensions,
including their presence in heterogeneous systems. Good luck
finding a 64-bit userspace that handles this.
Modern assembly function annotations:
- Start migrating our use of ENTRY() and ENDPROC() over to the
new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended
to aid debuggers
Kbuild:
- Cleanup detection of LSE support in the assembler by introducing
'as-instr'
- Remove compressed Image files when building clean targets
IP checksumming:
- Implement optimised IPv4 checksumming routine when hardware offload
is not in use. An IPv6 version is in the works, pending testing.
Hardware errata:
- Work around Cortex-A55 erratum #1530923
Shadow call stack:
- Work around some issues with Clang's integrated assembler not
liking our perfectly reasonable assembly code
- Avoid allocating the X18 register, so that it can be used to hold
the shadow call stack pointer in future
ACPI:
- Fix ID count checking in IORT code. This may regress broken
firmware that happened to work with the old implementation, in
which case we'll have to revert it and try something else
- Fix DAIF corruption on return from GHES handler with pseudo-NMIs
Miscellaneous:
- Whitelist some CPUs that are unaffected by Spectre-v2
- Reduce frequency of ASID rollover when KPTI is compiled in but
inactive
- Reserve a couple of arch-specific PROT flags that are already used
by Sparc and PowerPC and are planned for later use with BTI on
arm64
- Preparatory cleanup of our entry assembly code in preparation for
moving more of it into C later on
- Refactoring and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (73 commits)
arm64: acpi: fix DAIF manipulation with pNMI
arm64: kconfig: Fix alignment of E0PD help text
arm64: Use v8.5-RNG entropy for KASLR seed
arm64: Implement archrandom.h for ARMv8.5-RNG
arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'
arm64: entry: Avoid empty alternatives entries
arm64: Kconfig: select HAVE_FUTEX_CMPXCHG
arm64: csum: Fix pathological zero-length calls
arm64: entry: cleanup sp_el0 manipulation
arm64: entry: cleanup el0 svc handler naming
arm64: entry: mark all entry code as notrace
arm64: assembler: remove smp_dmb macro
arm64: assembler: remove inherit_daif macro
ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()
mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use
arm64: Use macros instead of hard-coded constants for MAIR_EL1
arm64: Add KRYO{3,4}XX CPU cores to spectre-v2 safe list
arm64: kernel: avoid x18 in __cpu_soft_restart
arm64: kvm: stop treating register x18 as caller save
arm64/lib: copy_page: avoid x18 register in assembler code
...
|
|
We finalize the system wide capabilities after the SMP CPUs
are booted by the kernel. This is used as a marker for deciding
various checks in the kernel. e.g, sanity check the hotplugged
CPUs for missing mandatory features.
However there is no explicit helper available for this in the
kernel. There is sys_caps_initialised, which is not exposed.
The other closest one we have is the jump_label arm64_const_caps_ready
which denotes that the capabilities are set and the capability checks
could use the individual jump_labels for fast path. This is
performed before setting the ELF Hwcaps, which must be checked
against the new CPUs. We also perform some of the other initialization
e.g, SVE setup, which is important for the use of FP/SIMD
where SVE is supported. Normally userspace doesn't get to run
before we finish this. However the in-kernel users may
potentially start using the neon mode. So, we need to
reject uses of neon mode before we are set. Instead of defining
a new marker for the completion of SVE setup, we could simply
reuse the arm64_const_caps_ready and enable it once we have
finished all the setup. Also we could expose this to the
various users as "system_capabilities_finalized()" to make
it more meaningful than "const_caps_ready".
Cc: Ard Biesheuvel <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Mark Rutland <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
This is required for clone3 which passes the TLS value through a
struct rather than a register.
Signed-off-by: Amanieu d'Antras <[email protected]>
Cc: [email protected]
Cc: <[email protected]> # 5.3.x
Acked-by: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Christian Brauner <[email protected]>
|
|
Preempting from IRQ-return means that the task has its PSTATE saved
on the stack, which will get restored when the task is resumed and does
the actual IRQ return.
However, enabling some CPU features requires modifying the PSTATE. This
means that, if a task was scheduled out during an IRQ-return before all
CPU features are enabled, the task might restore a PSTATE that does not
include the feature enablement changes once scheduled back in.
* Task 1:
PAN == 0 ---| |---------------
| |<- return from IRQ, PSTATE.PAN = 0
| <- IRQ |
+--------+ <- preempt() +--
^
|
reschedule Task 1, PSTATE.PAN == 1
* Init:
--------------------+------------------------
^
|
enable_cpu_features
set PSTATE.PAN on all CPUs
Worse than this, since PSTATE is untouched when task switching is done,
a task missing the new bits in PSTATE might affect another task, if both
do direct calls to schedule() (outside of IRQ/exception contexts).
Fix this by preventing preemption on IRQ-return until features are
enabled on all CPUs.
This way the only PSTATE values that are saved on the stack are from
synchronous exceptions. These are expected to be fatal this early, the
exception is BRK for WARN_ON(), but as this uses do_debug_exception()
which keeps IRQs masked, it shouldn't call schedule().
Signed-off-by: Julien Thierry <[email protected]>
[james: Replaced a really cool hack, with an even simpler static key in C.
expanded commit message with Julien's cover-letter ascii art]
Signed-off-by: James Morse <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
The system which has SVE feature crashed because of
the memory pointed by task->thread.sve_state was destroyed
by someone.
That is because sve_state is freed while the forking the
child process. The child process has the pointer of sve_state
which is same as the parent's because the child's task_struct
is copied from the parent's one. If the copy_process()
fails as an error on somewhere, for example, copy_creds(),
then the sve_state is freed even if the parent is alive.
The flow is as follows.
copy_process
p = dup_task_struct
=> arch_dup_task_struct
*dst = *src; // copy the entire region.
:
retval = copy_creds
if (retval < 0)
goto bad_fork_free;
:
bad_fork_free:
...
delayed_free_task(p);
=> free_task
=> arch_release_task_struct
=> fpsimd_release_task
=> __sve_free
=> kfree(task->thread.sve_state);
// free the parent's sve_state
Move child's sve_state = NULL and clearing TIF_SVE flag
to arch_dup_task_struct() so that the child doesn't free the
parent's one.
There is no need to wait until copy_process() to clear TIF_SVE for
dst, because the thread flags for dst are initialized already by
copying the src task_struct.
This change simplifies the code, so get rid of comments that are no
longer needed.
As a note, arm64 used to have thread_info on the stack. So it
would not be possible to clear TIF_SVE until the stack is initialized.
From commit c02433dd6de3 ("arm64: split thread_info from task stack"),
the thread_info is part of the task, so it should be valid to modify
the flag from arch_dup_task_struct().
Cc: [email protected] # 4.15.x-
Fixes: bc0ee4760364 ("arm64/sve: Core task context handling")
Signed-off-by: Masayoshi Mizuma <[email protected]>
Reported-by: Hidetoshi Seto <[email protected]>
Suggested-by: Dave Martin <[email protected]>
Reviewed-by: Dave Martin <[email protected]>
Tested-by: Julien Grall <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
This commits selects ARCH_HAS_ELF_RANDOMIZE when an arch uses the generic
topdown mmap layout functions so that this security feature is on by
default.
Note that this commit also removes the possibility for arm64 to have elf
randomization and no MMU: without MMU, the security added by randomization
is worth nothing.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Alexandre Ghiti <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Acked-by: Kees Cook <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Luis Chamberlain <[email protected]>
Cc: Albert Ou <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: James Hogan <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Russell King <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
opt-in
First rename the sysctl control to abi.tagged_addr_disabled and make it
default off (zero). When abi.tagged_addr_disabled == 1, only block the
enabling of the TBI ABI via prctl(PR_SET_TAGGED_ADDR_CTRL, PR_TAGGED_ADDR_ENABLE).
Getting the status of the ABI or disabling it is still allowed.
Acked-by: Andrey Konovalov <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
It is not desirable to relax the ABI to allow tagged user addresses into
the kernel indiscriminately. This patch introduces a prctl() interface
for enabling or disabling the tagged ABI with a global sysctl control
for preventing applications from enabling the relaxed ABI (meant for
testing user-space prctl() return error checking without reconfiguring
the kernel). The ABI properties are inherited by threads of the same
application and fork()'ed children but cleared on execve(). A Kconfig
option allows the overall disabling of the relaxed ABI.
The PR_SET_TAGGED_ADDR_CTRL will be expanded in the future to handle
MTE-specific settings like imprecise vs precise exceptions.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
Signed-off-by: Andrey Konovalov <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
On a CPU that doesn't support SSBS, PSTATE[12] is RES0. In a system
where only some of the CPUs implement SSBS, we end-up losing track of
the SSBS bit across task migration.
To address this issue, let's force the SSBS bit on context switch.
Fixes: 8f04e8e6e29c ("arm64: ssbd: Add support for PSTATE.SSBS rather than trapping to EL3")
Signed-off-by: Marc Zyngier <[email protected]>
[will: inverted logic and added comments]
Signed-off-by: Will Deacon <[email protected]>
|
|
Some common code is required by each stacktrace user to initialise
struct stackframe before the first call to unwind_frame().
In preparation for adding to the common code, this patch factors it
out into a separate function start_backtrace(), and modifies the
stacktrace callers appropriately.
No functional change.
Signed-off-by: Dave Martin <[email protected]>
[Mark: drop tsk argument, update more callsites]
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: James Morse <[email protected]>
Acked-by: Catalin Marinas <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
- Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
manage the permissions of executable vmalloc regions more strictly
- Slight performance improvement by keeping softirqs enabled while
touching the FPSIMD/SVE state (kernel_neon_begin/end)
- Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
XAFLAG and AXFLAG instructions for floating point comparison flags
manipulation) and FRINT (rounding floating point numbers to integers)
- Re-instate ARM64_PSEUDO_NMI support which was previously marked as
BROKEN due to some bugs (now fixed)
- Improve parking of stopped CPUs and implement an arm64-specific
panic_smp_self_stop() to avoid warning on not being able to stop
secondary CPUs during panic
- perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
platforms
- perf: DDR performance monitor support for iMX8QXP
- cache_line_size() can now be set from DT or ACPI/PPTT if provided to
cope with a system cache info not exposed via the CPUID registers
- Avoid warning on hardware cache line size greater than
ARCH_DMA_MINALIGN if the system is fully coherent
- arm64 do_page_fault() and hugetlb cleanups
- Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
- Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
'arm_boot_flags' introduced in 5.1)
- CONFIG_RANDOMIZE_BASE now enabled in defconfig
- Allow the selection of ARM64_MODULE_PLTS, currently only done via
RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
over into the vmalloc area
- Make ZONE_DMA32 configurable
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
perf: arm_spe: Enable ACPI/Platform automatic module loading
arm_pmu: acpi: spe: Add initial MADT/SPE probing
ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
ACPI/PPTT: Modify node flag detection to find last IDENTICAL
x86/entry: Simplify _TIF_SYSCALL_EMU handling
arm64: rename dump_instr as dump_kernel_instr
arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
arm64: Implement panic_smp_self_stop()
arm64: Improve parking of stopped CPUs
arm64: Expose FRINT capabilities to userspace
arm64: Expose ARMv8.5 CondM capability to userspace
arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
arm64: ARM64_MODULES_PLTS must depend on MODULES
arm64: bpf: do not allocate executable memory
arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
arm64: module: create module allocations without exec permissions
arm64: Allow user selection of ARM64_MODULE_PLTS
acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
arm64: Allow selecting Pseudo-NMI again
...
|
|
When using IRQ priority masking to disable interrupts, in order to deal
with the PSR.I state, local_irq_save() would convert the I bit into a
PMR value (GIC_PRIO_IRQOFF). This resulted in local_irq_restore()
potentially modifying the value of PMR in undesired location due to the
state of PSR.I upon flag saving [1].
In an attempt to solve this issue in a less hackish manner, introduce
a bit (GIC_PRIO_IGNORE_PMR) for the PMR values that can represent
whether PSR.I is being used to disable interrupts, in which case it
takes precedence of the status of interrupt masking via PMR.
GIC_PRIO_PSR_I_SET is chosen such that (<pmr_value> |
GIC_PRIO_PSR_I_SET) does not mask more interrupts than <pmr_value> as
some sections (e.g. arch_cpu_idle(), interrupt acknowledge path)
requires PMR not to mask interrupts that could be signaled to the
CPU when using only PSR.I.
[1] https://www.spinics.net/lists/arm-kernel/msg716956.html
Fixes: 4a503217ce37 ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Cc: <[email protected]> # 5.1.x-
Reported-by: Zenghui Yu <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Wei Li <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Christoffer Dall <[email protected]>
Cc: James Morse <[email protected]>
Cc: Suzuki K Pouloze <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Signed-off-by: Julien Thierry <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Alexios Zavras <[email protected]>
Reviewed-by: Allison Randal <[email protected]>
Reviewed-by: Enrico Weigelt <[email protected]>
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
CPU does not received signals for interrupts with a priority masked by
ICC_PMR_EL1. This means the CPU might not come back from a WFI
instruction.
Make sure ICC_PMR_EL1 does not mask interrupts when doing a WFI.
Since the logic of cpu_do_idle is becoming a bit more complex than just
two instructions, lets turn it from ASM to C.
Signed-off-by: Julien Thierry <[email protected]>
Suggested-by: Daniel Thompson <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In order to replace PSR.I interrupt disabling/enabling with ICC_PMR_EL1
interrupt masking, ICC_PMR_EL1 needs to be saved/restored when
taking/returning from an exception. This mimics the way hardware saves
and restores PSR.I bit in spsr_el1 for exceptions and ERET.
Add PMR to the registers to save in the pt_regs struct upon kernel entry,
and restore it before ERET. Also, initialize it to a sane value when
creating new tasks.
Signed-off-by: Julien Thierry <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Dave Martin <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Rework of the kprobe/uprobe and synthetic events to consolidate all
the dynamic event code. This will make changes in the future easier.
- Partial rewrite of the function graph tracing infrastructure. This
will allow for multiple users of hooking onto functions to get the
callback (return) of the function. This is the ground work for having
kprobes and function graph tracer using one code base.
- Clean up of the histogram code that will facilitate adding more
features to the histograms in the future.
- Addition of str_has_prefix() and a few use cases. There currently is
a similar function strstart() that is used in a few places, but only
returns a bool and not a length. These instances will be removed in
the future to use str_has_prefix() instead.
- A few other various clean ups as well.
* tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
tracing: Use the return of str_has_prefix() to remove open coded numbers
tracing: Have the historgram use the result of str_has_prefix() for len of prefix
tracing: Use str_has_prefix() instead of using fixed sizes
tracing: Use str_has_prefix() helper for histogram code
string.h: Add str_has_prefix() helper function
tracing: Make function ‘ftrace_exports’ static
tracing: Simplify printf'ing in seq_print_sym
tracing: Avoid -Wformat-nonliteral warning
tracing: Merge seq_print_sym_short() and seq_print_sym_offset()
tracing: Add hist trigger comments for variable-related fields
tracing: Remove hist trigger synth_var_refs
tracing: Use hist trigger's var_ref array to destroy var_refs
tracing: Remove open-coding of hist trigger var_ref management
tracing: Use var_refs[] for hist trigger reference checking
tracing: Change strlen to sizeof for hist trigger static strings
tracing: Remove unnecessary hist trigger struct field
tracing: Fix ftrace_graph_get_ret_stack() to use task and not current
seq_buf: Use size_t for len in seq_buf_puts()
seq_buf: Make seq_buf_puts() null-terminate the buffer
arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack
...
|
|
The structure of the ret_stack array on the task struct is going to
change, and accessing it directly via the curr_ret_stack index will no
longer give the ret_stack entry that holds the return address. To access
that, architectures must now use ftrace_graph_get_ret_stack() to get the
associated ret_stack that matches the saved return address.
Cc: [email protected]
Cc: Will Deacon <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Catalin Marinas <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
This patch adds basic support for pointer authentication, allowing
userspace to make use of APIAKey, APIBKey, APDAKey, APDBKey, and
APGAKey. The kernel maintains key values for each process (shared by all
threads within), which are initialised to random values at exec() time.
The ID_AA64ISAR1_EL1.{APA,API,GPA,GPI} fields are exposed to userspace,
to describe that pointer authentication instructions are available and
that the kernel is managing the keys. Two new hwcaps are added for the
same reason: PACA (for address authentication) and PACG (for generic
authentication).
Reviewed-by: Richard Henderson <[email protected]>
Signed-off-by: Mark Rutland <[email protected]>
Signed-off-by: Kristina Martsenko <[email protected]>
Tested-by: Adam Wallis <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Ramana Radhakrishnan <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
[will: Fix sizeof() usage and unroll address key initialisation]
Signed-off-by: Will Deacon <[email protected]>
|