| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* kvm-arm64/stage2-vhe-load:
: Setup stage-2 MMU from vcpu_load() for VHE
:
: Unlike nVHE, there is no need to switch the stage-2 MMU around on guest
: entry/exit in VHE mode as the host is running at EL2. Despite this KVM
: reloads the stage-2 on every guest entry, which is needless.
:
: This series moves the setup of the stage-2 MMU context to vcpu_load()
: when running in VHE mode. This is likely to be a win across the board,
: but also allows us to remove an ISB on the guest entry path for systems
: with one of the speculative AT errata.
KVM: arm64: Move VTCR_EL2 into struct s2_mmu
KVM: arm64: Load the stage-2 MMU context in kvm_vcpu_load_vhe()
KVM: arm64: Rename helpers for VHE vCPU load/put
KVM: arm64: Reload stage-2 for VMID change on VHE
KVM: arm64: Restore the stage-2 context in VHE's __tlb_switch_to_host()
KVM: arm64: Don't zero VTTBR in __tlb_switch_to_host()
Signed-off-by: Oliver Upton <[email protected]>
|
|
* kvm-arm64/nv-trap-fixes:
: NV trap forwarding fixes, courtesy Miguel Luis and Marc Zyngier
:
: - Explicitly define the effects of HCR_EL2.NV on EL2 sysregs in the
: NV trap encoding
:
: - Make EL2 registers that access AArch32 guest state UNDEF or RAZ/WI
: where appropriate for NV guests
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
Signed-off-by: Oliver Upton <[email protected]>
|
|
* kvm-arm64/smccc-filter-cleanups:
: Cleanup the management of KVM's SMCCC maple tree
:
: Avoid the cost of maintaining the SMCCC filter maple tree if userspace
: hasn't writen a rule to the filter. While at it, rip out the now
: unnecessary VM flag to indicate whether or not the SMCCC filter was
: configured.
KVM: arm64: Use mtree_empty() to determine if SMCCC filter configured
KVM: arm64: Only insert reserved ranges when SMCCC filter is used
KVM: arm64: Add a predicate for testing if SMCCC filter is configured
Signed-off-by: Oliver Upton <[email protected]>
|
|
* kvm-arm64/feature-flag-refactor:
: vCPU feature flag cleanup
:
: Clean up KVM's handling of vCPU feature flags to get rid of the
: vCPU-scoped bitmaps and remove failure paths from kvm_reset_vcpu().
KVM: arm64: Get rid of vCPU-scoped feature bitmap
KVM: arm64: Remove unused return value from kvm_reset_vcpu()
KVM: arm64: Hoist NV+SVE check into KVM_ARM_VCPU_INIT ioctl handler
KVM: arm64: Prevent NV feature flag on systems w/o nested virt
KVM: arm64: Hoist PAuth checks into KVM_ARM_VCPU_INIT ioctl
KVM: arm64: Hoist SVE check into KVM_ARM_VCPU_INIT ioctl handler
KVM: arm64: Hoist PMUv3 check into KVM_ARM_VCPU_INIT ioctl handler
KVM: arm64: Add generic check for system-supported vCPU features
Signed-off-by: Oliver Upton <[email protected]>
|
|
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Put an upper bound on the number of I-cache invalidations by
: cacheline to avoid soft lockups
:
: - Get rid of bogus refererence count transfer for THP mappings
:
: - Do a local TLB invalidation on permission fault race
:
: - Fixes for page_fault_test KVM selftest
:
: - Add a tracepoint for detecting MMIO instructions unsupported by KVM
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: arm64: Do not transfer page refcount for THP adjustment
KVM: arm64: Avoid soft lockups due to I-cache maintenance
arm64: tlbflush: Rename MAX_TLBI_OPS
KVM: arm64: Don't use kerneldoc comment for arm64_check_features()
Signed-off-by: Oliver Upton <[email protected]>
|
|
* for-next/cpus_have_const_cap: (38 commits)
: cpus_have_const_cap() removal
arm64: Remove cpus_have_const_cap()
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_REPEAT_TLBI
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_NVIDIA_CARMEL_CNP
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_CAVIUM_23154
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_2645198
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_1742098
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_1542419
arm64: Avoid cpus_have_const_cap() for ARM64_WORKAROUND_843419
arm64: Avoid cpus_have_const_cap() for ARM64_UNMAP_KERNEL_AT_EL0
arm64: Avoid cpus_have_const_cap() for ARM64_{SVE,SME,SME2,FA64}
arm64: Avoid cpus_have_const_cap() for ARM64_SPECTRE_V2
arm64: Avoid cpus_have_const_cap() for ARM64_SSBS
arm64: Avoid cpus_have_const_cap() for ARM64_MTE
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_TLB_RANGE
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_WFXT
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_RNG
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_EPAN
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_PAN
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_GIC_PRIO_MASKING
arm64: Avoid cpus_have_const_cap() for ARM64_HAS_DIT
...
|
|
* for-next/feat_lse128:
: HWCAP for FEAT_LSE128
kselftest/arm64: add FEAT_LSE128 to hwcap test
arm64: add FEAT_LSE128 HWCAP
|
|
* for-next/feat_lrcpc3:
: HWCAP for FEAT_LRCPC3
selftests/arm64: add HWCAP2_LRCPC3 test
arm64: add FEAT_LRCPC3 HWCAP
|
|
* for-next/feat_sve_b16b16:
: Add support for FEAT_SVE_B16B16 (BFloat16)
kselftest/arm64: Verify HWCAP2_SVE_B16B16
arm64/sve: Report FEAT_SVE_B16B16 to userspace
|
|
'for-next/kselftest', 'for-next/misc' and 'for-next/cpufeat-display-cores', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
docs/perf: Add ampere_cspmu to toctree to fix a build warning
perf: arm_cspmu: ampere_cspmu: Add support for Ampere SoC PMU
perf: arm_cspmu: Support implementation specific validation
perf: arm_cspmu: Support implementation specific filters
perf: arm_cspmu: Split 64-bit write to 32-bit writes
perf: arm_cspmu: Separate Arm and vendor module
* for-next/sve-remove-pseudo-regs:
: arm64/fpsimd: Remove the vector length pseudo registers
arm64/sve: Remove SMCR pseudo register from cpufeature code
arm64/sve: Remove ZCR pseudo register from cpufeature code
* for-next/backtrace-ipi:
: Add IPI for backtraces/kgdb, use NMI
arm64: smp: Don't directly call arch_smp_send_reschedule() for wakeup
arm64: smp: avoid NMI IPIs with broken MediaTek FW
arm64: smp: Mark IPI globals as __ro_after_init
arm64: kgdb: Implement kgdb_roundup_cpus() to enable pseudo-NMI roundup
arm64: smp: IPI_CPU_STOP and IPI_CPU_CRASH_STOP should try for NMI
arm64: smp: Add arch support for backtrace using pseudo-NMI
arm64: smp: Remove dedicated wakeup IPI
arm64: idle: Tag the arm64 idle functions as __cpuidle
irqchip/gic-v3: Enable support for SGIs to act as NMIs
* for-next/kselftest:
: Various arm64 kselftest updates
kselftest/arm64: Validate SVCR in streaming SVE stress test
* for-next/misc:
: Miscellaneous patches
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
arm64/mm: Hoist synchronization out of set_ptes() loop
arm64: swiotlb: Reduce the default size if no ZONE_DMA bouncing needed
* for-next/cpufeat-display-cores:
: arm64 cpufeature display enabled cores
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
|
|
When trapping accesses from a NV guest that tries to access
SPSR_{irq,abt,und,fiq}, make sure we handle them as RAZ/WI,
as if AArch32 wasn't implemented.
This involves a bit of repainting to make the visibility
handler more generic.
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Some _EL2 encodings are missing. Add them.
Signed-off-by: Miguel Luis <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
[maz: dropped secure encodings]
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Some _EL12 encodings are missing. Add them.
Reviewed-by: Eric Auger <[email protected]>
Signed-off-by: Miguel Luis <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
The number of PMU event counters is indicated in PMCR_EL0.N.
For a vCPU with PMUv3 configured, the value is set to the same
value as the current PE on every vCPU reset. Unless the vCPU is
pinned to PEs that has the PMU associated to the guest from the
initial vCPU reset, the value might be different from the PMU's
PMCR_EL0.N on heterogeneous PMU systems.
Fix this by setting the vCPU's PMCR_EL0.N to the PMU's PMCR_EL0.N
value. Track the PMCR_EL0.N per guest, as only one PMU can be set
for the guest (PMCR_EL0.N must be the same for all vCPUs of the
guest), and it is convenient for updating the value.
To achieve this, the patch introduces a helper,
kvm_arm_pmu_get_max_counters(), that reads the maximum number of
counters from the arm_pmu associated to the VM. Make the function
global as upcoming patches will be interested to know the value
while setting the PMCR.N of the guest from userspace.
KVM does not yet support userspace modifying PMCR_EL0.N.
The following patch will add support for that.
Reviewed-by: Sebastian Ott <[email protected]>
Co-developed-by: Marc Zyngier <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Reiji Watanabe <[email protected]>
Signed-off-by: Raghavendra Rao Ananta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
We currently have a global VTCR_EL2 value for each guest, even
if the guest uses NV. This implies that the guest's own S2 must
fit in the host's. This is odd, for multiple reasons:
- the PARange values and the number of IPA bits don't necessarily
match: you can have 33 bits of IPA space, and yet you can only
describe 32 or 36 bits of PARange
- When userspace set the IPA space, it creates a contract with the
kernel saying "this is the IPA space I'm prepared to handle".
At no point does it constraint the guest's own IPA space as
long as the guest doesn't try to use a [I]PA outside of the
IPA space set by userspace
- We don't even try to hide the value of ID_AA64MMFR0_EL1.PARange.
And then there is the consequence of the above: if a guest tries
to create a S2 that has for input address something that is larger
than the IPA space defined by the host, we inject a fatal exception.
This is no good. For all intent and purposes, a guest should be
able to have the S2 it really wants, as long as the *output* address
of that S2 isn't outside of the IPA space.
For that, we need to have a per-s2_mmu VTCR_EL2 setting, which
allows us to represent the full PARange. Move the vctr field into
the s2_mmu structure, which has no impact whatsoever, except for NV.
Note that once we are able to override ID_AA64MMFR0_EL1.PARange
from userspace, we'll also be able to restrict the size of the
shadow S2 that NV uses.
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
The AMU feature can be enabled on a subset of the cores in a system.
Because of that, it prints a message for each core as it is detected.
This becomes tedious when there are hundreds of cores. Instead, for
CPU features which can be enabled on a subset of the present cores,
lets wait until update_cpu_capabilities() and print the subset of cores
the feature was enabled on.
Signed-off-by: Jeremy Linton <[email protected]>
Reviewed-by: Ionela Voinescu <[email protected]>
Tested-by: Ionela Voinescu <[email protected]>
Reviewed-by: Punit Agrawal <[email protected]>
Tested-by: Punit Agrawal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The names for the helpers we expose to the 'generic' KVM code are a bit
imprecise; we switch the EL0 + EL1 sysreg context and setup trap
controls that do not need to change for every guest entry/exit. Rename +
shuffle things around a bit in preparation for loading the stage-2 MMU
context on vcpu_load().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Naturally, a change to the VMID for an MMU implies a new value for
VTTBR. Reload on VMID change in anticipation of loading stage-2 on
vcpu_load() instead of every guest entry.
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
The AppliedMicro XGene-1 CPU has an erratum where the timer condition
would only consider TVAL, not CVAL. We currently apply a workaround when
seeing the PartNum field of MIDR_EL1 being 0x000, under the assumption
that this would match only the XGene-1 CPU model.
However even the Ampere eMAG (aka XGene-3) uses that same part number, and
only differs in the "Variant" and "Revision" fields: XGene-1's MIDR is
0x500f0000, our eMAG reports 0x503f0002. Experiments show the latter
doesn't show the faulty behaviour.
Increase the specificity of the check to only consider partnum 0x000 and
variant 0x00, to exclude the Ampere eMAG.
Fixes: 012f18850452 ("clocksource/drivers/arm_arch_timer: Work around broken CVAL implementations")
Reported-by: Ross Burton <[email protected]>
Signed-off-by: Andre Przywara <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
There are two variants of system_uses_lse_atomics(), depending on
CONFIG_ARM64_LSE_ATOMICS. The function isn't called anywhere when
CONFIG_ARM64_LSE_ATOMICS is disabled. It can be directly replaced
by alternative_has_cap_likely(ARM64_HAS_LSE_ATOMICS) when the kernel
option is enabled.
No need to keep system_uses_lse_atomics() and just remove it.
Signed-off-by: Gavin Shan <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
This argument is not used by the arm64 implementation. Mark it as
__always_unused and also remove the unnecessary 'addr' increment in
set_ptes().
Signed-off-by: Catalin Marinas <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Cc: Will Deacon <[email protected]>
Tested-by: Ryan Roberts <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
set_ptes() sets a physically contiguous block of memory (which all
belongs to the same folio) to a contiguous block of ptes. The arm64
implementation of this previously just looped, operating on each
individual pte. But the __sync_icache_dcache() and mte_sync_tags()
operations can both be hoisted out of the loop so that they are
performed once for the contiguous set of pages (which may be less than
the whole folio). This should result in minor performance gains.
__sync_icache_dcache() already acts on the whole folio, and sets a flag
in the folio so that it skips duplicate calls. But by hoisting the call,
all the pte testing is done only once.
mte_sync_tags() operates on each individual page with its own loop. But
by passing the number of pages explicitly, we can rely solely on its
loop and do the checks only once. This approach also makes it robust for
the future, rather than assuming if a head page of a compound page is
being mapped, then the whole compound page is being mapped, instead we
explicitly know how many pages are being mapped. The old assumption may
not continue to hold once the "anonymous large folios" feature is
merged.
Signed-off-by: Ryan Roberts <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
There are no longer any users of cpus_have_const_cap(), and therefore it
can be removed.
Remove cpus_have_const_cap(). At the same time, remove
__cpus_have_const_cap(), as this is a trivial wrapper of
alternative_has_cap_unlikely(), which can be used directly instead.
The comment for __system_matches_cap() is updated to no longer refer to
cpus_have_const_cap(). As we have a number of ways to check the cpucaps,
the specific suggestions are removed.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Kristina Martsenko <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In arch_tlbbatch_should_defer() we use cpus_have_const_cap() to check
for ARM64_WORKAROUND_REPEAT_TLBI, but this is not necessary and
alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The cpus_have_const_cap() check in arch_tlbbatch_should_defer() is an
optimization to avoid some redundant work when the
ARM64_WORKAROUND_REPEAT_TLBI cpucap is detected and forces the immediate
use of TLBI + DSB ISH. In the window between detecting the
ARM64_WORKAROUND_REPEAT_TLBI cpucap and patching alternatives this is
not a big concern and there's no need to optimize this window at the
expsense of subsequent usage at runtime.
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime. The ARM64_WORKAROUND_REPEAT_TLBI cpucap is added to
cpucap_is_possible() so that code can be elided entirely when this is
not possible without requiring ifdeffery or IS_ENABLED() checks at each
usage.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In has_useable_cnp() we use cpus_have_const_cap() to check for
ARM64_WORKAROUND_NVIDIA_CARMEL_CNP, but this is not necessary and
cpus_have_cap() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
We use has_useable_cnp() to determine whether we have the system-wide
ARM64_HAS_CNP cpucap. Due to the structure of the cpufeature code, we
call has_useable_cnp() in two distinct cases:
1) When finalizing system capabilities, setup_system_capabilities() will
call has_useable_cnp() with SCOPE_SYSTEM to determine whether all
CPUs have the feature. This is called after we've detected any local
cpucaps including ARM64_WORKAROUND_NVIDIA_CARMEL_CNP, but prior to
patching alternatives.
If the ARM64_WORKAROUND_NVIDIA_CARMEL_CNP was detected, we will not
detect ARM64_HAS_CNP.
2) After finalizing system capabilties, verify_local_cpu_capabilities()
will call has_useable_cnp() with SCOPE_LOCAL_CPU to verify that CPUs
have CNP if we previously detected it.
Note that if ARM64_WORKAROUND_NVIDIA_CARMEL_CNP was detected, we will
not have detected ARM64_HAS_CNP.
For case 1 we must check the system_cpucaps bitmap as this occurs prior
to patching the alternatives. For case 2 we'll only call
has_useable_cnp() once per subsequent onlining of a CPU, and as this
isn't a fast path it's not necessary to optimize for this case.
This patch replaces the use of cpus_have_const_cap() with
cpus_have_cap(), which will only generate the bitmap test and avoid
generating an alternative sequence, resulting in slightly simpler annd
smaller code being generated. The ARM64_WORKAROUND_NVIDIA_CARMEL_CNP
cpucap is added to cpucap_is_possible() so that code can be elided
entirely when this is not possible.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In gic_read_iar() we use cpus_have_const_cap() to check for
ARM64_WORKAROUND_CAVIUM_23154 but this is not necessary and
alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The ARM64_WORKAROUND_CAVIUM_23154 cpucap is detected and patched early
on the boot CPU before the GICv3 driver is initialized and hence before
gic_read_iar() is ever called. Thus it is not necessary to use
cpus_have_const_cap(), and alternative_has_cap() is equivalent.
In addition, arm64's gic_read_iar() lives in irq-gic-v3.c purely for
historical reasons. It was originally added prior to 32-bit arm support
in commit:
6d4e11c5e2e8cd54 ("irqchip/gicv3: Workaround for Cavium ThunderX erratum 23154")
When support for 32-bit arm was added, 32-bit arm's gic_read_iar()
implementation was placed in <asm/arch_gicv3.h>, but the arm64 version
was kept within irq-gic-v3.c as it depended on a static key local to
irq-gic-v3.c and it was easier to add ifdeffery, which is what we did in
commit:
7936e914f7b0827c ("irqchip/gic-v3: Refactor the arm64 specific parts")
Subsequently the static key was replaced with a cpucap in commit:
a4023f682739439b ("arm64: Add hypervisor safe helper for checking constant capabilities")
Since that commit there has been no need to keep arm64's gic_read_iar()
in irq-gic-v3.c.
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime. For consistency, move the arm64-specific gic_read_iar()
implementation over to arm64's <asm/arch_gicv3.h>. The
ARM64_WORKAROUND_CAVIUM_23154 cpucap is added to cpucap_is_possible() so
that code can be elided entirely when this is not possible.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
We use cpus_have_const_cap() to check for ARM64_WORKAROUND_2645198 but
this is not necessary and alternative_has_cap() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The ARM64_WORKAROUND_2645198 cpucap is detected and patched before any
userspace translation table exist, and the workaround is only necessary
when manipulating usrspace translation tables which are in use. Thus it
is not necessary to use cpus_have_const_cap(), and alternative_has_cap()
is equivalent.
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime. The ARM64_WORKAROUND_2645198 cpucap is added to
cpucap_is_possible() so that code can be elided entirely when this is
not possible, and redundant IS_ENABLED() checks are removed.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In elf_hwcap_fixup() we use cpus_have_const_cap() to check for
ARM64_WORKAROUND_1742098, but this is not necessary and cpus_have_cap()
would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The ARM64_WORKAROUND_1742098 cpucap is detected and patched before
elf_hwcap_fixup() can run, and hence it is not necessary to use
cpus_have_const_cap(). We run cpus_have_const_cap() at most twice: once
after finalizing system cpucaps, and potentially once more after
detecting mismatched CPUs which support AArch32 at EL0. Due to this,
it's not necessary to optimize for many calls to elf_hwcap_fixup(), and
it's fine to use cpus_have_cap().
This patch replaces the use of cpus_have_const_cap() with
cpus_have_cap(), which will only generate the bitmap test and avoid
generating an alternative sequence, resulting in slightly simpler annd
smaller code being generated. For consistenct with other cpucaps, the
ARM64_WORKAROUND_1742098 cpucap is added to cpucap_is_possible() so that
code can be elided when this is not possible. However, as we only define
compat_elf_hwcap2 when CONFIG_COMPAT=y, some ifdeffery is still required
within user_feature_fixup() to avoid build errors when CONFIG_COMPAT=n.
Signed-off-by: Mark Rutland <[email protected]>
Cc: James Morse <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In count_plts() and is_forbidden_offset_for_adrp() we use
cpus_have_const_cap() to check for ARM64_WORKAROUND_843419, but this is
not necessary and cpus_have_final_cap() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
It's not possible to load a module in the window between detecting the
ARM64_WORKAROUND_843419 cpucap and patching alternatives. The module VA
range limits are initialized much later in module_init_limits() which is
a subsys_initcall, and module loading cannot happen before this. Hence
it's not necessary for count_plts() or is_forbidden_offset_for_adrp() to
use cpus_have_const_cap().
This patch replaces the use of cpus_have_const_cap() with
cpus_have_final_cap() which will avoid generating code to test the
system_cpucaps bitmap and should be better for all subsequent calls at
runtime. Using cpus_have_final_cap() clearly documents that we do not
expect this code to run before cpucaps are finalized, and will make it
easier to spot issues if code is changed in future to allow modules to
be loaded earlier. The ARM64_WORKAROUND_843419 cpucap is added to
cpucap_is_possible() so that code can be elided entirely when this is not
possible, and redundant IS_ENABLED() checks are removed.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In arm64_kernel_unmapped_at_el0() we use cpus_have_const_cap() to check
for ARM64_UNMAP_KERNEL_AT_EL0, but this is only necessary so that
arm64_get_bp_hardening_vector() and this_cpu_set_vectors() can run prior
to alternatives being patched. Otherwise this is not necessary and
alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The ARM64_UNMAP_KERNEL_AT_EL0 cpucap is a system-wide feature that is
detected and patched before any translation tables are created for
userspace. In the window between detecting the ARM64_UNMAP_KERNEL_AT_EL0
cpucap and patching alternatives, most users of
arm64_kernel_unmapped_at_el0() do not need to know that the cpucap has
been detected:
* As KVM is initialized after cpucaps are finalized, no usaef of
arm64_kernel_unmapped_at_el0() in the KVM code is reachable during
this window.
* The arm64_mm_context_get() function in arch/arm64/mm/context.c is only
called after the SMMU driver is brought up after alternatives have
been patched. Thus this can safely use cpus_have_final_cap() or
alternative_has_cap_*().
Similarly the asids_update_limit() function is called after
alternatives have been patched as an arch_initcall, and this can
safely use cpus_have_final_cap() or alternative_has_cap_*().
Similarly we do not expect an ASID rollover to occur between cpucaps
being detected and patching alternatives. Thus
set_reserved_asid_bits() can safely use cpus_have_final_cap() or
alternative_has_cap_*().
* The __tlbi_user() and __tlbi_user_level() macros are not used during
this window, and only need to invalidate additional entries once
userspace translation tables have been active on a CPU. Thus these can
safely use alternative_has_cap_*().
* The xen_kernel_unmapped_at_usr() function is not used during this
window as it is only used in a late_initcall. Thus this can safely use
cpus_have_final_cap() or alternative_has_cap_*().
* The arm64_get_meltdown_state() function is not used during this
window. It only used by arm64_get_meltdown_state() and KVM code, both
of which are only used after cpucaps have been finalized. Thus this
can safely use cpus_have_final_cap() or alternative_has_cap_*().
* The tls_thread_switch() uses arm64_kernel_unmapped_at_el0() as an
optimization to avoid zeroing tpidrro_el0 when KPTI is enabled
and this will be trampled by the KPTI trampoline. It doesn't matter if
this continues to zero the register during the window between
detecting the cpucap and patching alternatives, so this can safely use
alternative_has_cap_*().
* The sdei_arch_get_entry_point() and do_sdei_event() functions aren't
reachable at this time as the SDEI driver is registered later by
acpi_init() -> acpi_ghes_init() -> sdei_init(), where acpi_init is a
subsys_initcall. Thus these can safely use cpus_have_final_cap() or
alternative_has_cap_*().
* The uses under drivers/ aren't reachable at this time as the drivers
are registered later:
- TRBE is registered via module_init()
- SMMUv3 is registred via module_driver()
- SPE is registred via module_init()
* The arm64_get_bp_hardening_vector() and this_cpu_set_vectors()
functions need to run on boot CPUs prior to patching alternatives.
As these are only called during the onlining of a CPU, it's fine to
perform a system_cpucaps bitmap test using cpus_have_cap().
This patch modifies this_cpu_set_vectors() to use cpus_have_cap(), and
replaced all other use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime. The ARM64_UNMAP_KERNEL_AT_EL0 cpucap is added to
cpucap_is_possible() so that code can be elided entirely when this is
not possible.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: James Morse <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In system_supports_{sve,sme,sme2,fa64}() we use cpus_have_const_cap() to
check for the relevant cpucaps, but this is only necessary so that
sve_setup() and sme_setup() can run prior to alternatives being patched,
and otherwise alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
All of system_supports_{sve,sme,sme2,fa64}() will return false prior to
system cpucaps being detected. In the window between system cpucaps being
detected and patching alternatives, we need system_supports_sve() and
system_supports_sme() to run to initialize SVE and SME properties, but
all other users of system_supports_{sve,sme,sme2,fa64}() don't depend on
the relevant cpucap becoming true until alternatives are patched:
* No KVM code runs until after alternatives are patched, and so this can
safely use cpus_have_final_cap() or alternative_has_cap_*().
* The cpuid_cpu_online() callback in arch/arm64/kernel/cpuinfo.c is
registered later from cpuinfo_regs_init() as a device_initcall, and so
this can safely use cpus_have_final_cap() or alternative_has_cap_*().
* The entry, signal, and ptrace code isn't reachable until userspace has
run, and so this can safely use cpus_have_final_cap() or
alternative_has_cap_*().
* Currently perf_reg_validate() will un-reserve the PERF_REG_ARM64_VG
pseudo-register before alternatives are patched, and before
sve_setup() has run. If a sampling event is created early enough, this
would allow perf_ext_reg_value() to sample (the as-yet uninitialized)
thread_struct::vl[] prior to alternatives being patched.
It would be preferable to defer this until alternatives are patched,
and this can safely use alternative_has_cap_*().
* The context-switch code will run during this window as part of
stop_machine() used during alternatives_patch_all(), and potentially
for other work if other kernel threads are created early. No threads
require the use of SVE/SME/SME2/FA64 prior to alternatives being
patched, and it would be preferable for the related context-switch
logic to take effect after alternatives are patched so that ths is
guaranteed to see a consistent system-wide state (e.g. anything
initialized by sve_setup() and sme_setup().
This can safely ues alternative_has_cap_*().
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime. The sve_setup() and sme_setup() functions are modified to
use cpus_have_cap() directly so that they can observe the cpucaps being
set prior to alternatives being patched.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In arm64_apply_bp_hardening() we use cpus_have_const_cap() to check for
ARM64_SPECTRE_V2 , but this is not necessary and alternative_has_cap_*()
would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The cpus_have_const_cap() check in arm64_apply_bp_hardening() is
intended to avoid the overhead of looking up and invoking a per-cpu
function pointer when no branch predictor hardening is required. The
arm64_apply_bp_hardening() function itself is called in two distinct
flows:
1) When handling certain exceptions taken from EL0, where the PC could
be a TTBR1 address and hence might have trained a branch predictor.
As cpucaps are detected and alternatives are patched long before it
is possible to execute userspace, it is not necessary to use
cpus_have_const_cap() for these cases, and cpus_have_final_cap() or
alternative_has_cap() would be preferable.
2) When switching between tasks in check_and_switch_context().
This can be called before cpucaps are detected and alternatives are
patched, but this is long before the kernel mounts filesystems or
accepts any input. At this stage the kernel hasn't loaded any secrets
and there is no potential for hostile branch predictor training. Once
cpucaps have been finalized and alternatives have been patched,
switching tasks will invalidate any prior predictions. Hence it is
not necessary to use cpus_have_const_cap() for this case.
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In system_supports_mte() we use cpus_have_const_cap() to check for
ARM64_MTE, but this is not necessary and cpus_have_final_boot_cap()
would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The ARM64_MTE cpucap is a boot cpu feature which is detected and patched
early on the boot CPU under smp_prepare_boot_cpu(). In the window
between detecting the ARM64_MTE cpucap and patching alternatives,
nothing depends on the ARM64_MTE cpucap:
* The kasan_hw_tags_enabled() helper depends upon the kasan_flag_enabled
static key, which is initialized later in kasan_init_hw_tags() after
alternatives have been applied.
* No KVM code is called during this window, and KVM is not initialized
until after system cpucaps have been detected and patched. KVM code
can safely use cpus_have_final_cap() or alternative_has_cap_*().
* We don't context-switch prior to patching boot alternatives, and thus
mte_thread_switch() is not reachable during this window. Thus, we can
safely use cpus_have_final_boot_cap() or alternative_has_cap_*() in
the context-switch code.
* IRQ and FIQ are masked during this window, and we can only take SError
and Debug exceptions. SError exceptions are fatal at this point in
time, and we do not expect to take Debug exceptions, thus:
- It's fine to lave TCO set for exceptions taken during this window,
and mte_disable_tco_entry() doesn't need to do anything.
- We don't need to detect and report asynchronous tag cehck faults
during this window, and neither mte_check_tfsr_entry() nor
mte_check_tfsr_exit() need to do anything.
Since we want to report any SErrors taken during thiw window, these
cannot safely use cpus_have_final_boot_cap() or cpus_have_final_cap(),
but these can safely use alternative_has_cap_*().
* The __set_pte_at() function is not used during this window. It is
possible for this to be used on kernel mappings prior to boot cpucaps
being finalized, so this cannot safely use cpus_have_final_boot_cap()
or cpus_have_final_cap(), but this can safely use
alternative_has_cap_*().
* No userspace translation tables have been created yet, and swap has
not been initialized yet. Thus swapping is not possible and none of
the following are called:
- arch_thp_swp_supported()
- arch_prepare_to_swap()
- arch_swap_invalidate_page()
- arch_swap_invalidate_area()
- arch_swap_restore()
These can safely use system_has_final_cap() or
alternative_has_cap_*().
* The elfcore functions are only reachable after userspace is brought
up, which happens after system cpucaps have been detected and patched.
Thus the elfcore code can safely use cpus_have_final_cap() or
alternative_has_cap_*().
* Hibernation is only possible after userspace is brought up, which
happens after system cpucaps have been detected and patched. Thus the
hibernate code can safely use cpus_have_final_cap() or
alternative_has_cap_*().
* The set_tagged_addr_ctrl() function is only reachable after userspace
is brought up, which happens after system cpucaps have been detected
and patched. Thus this can safely use cpus_have_final_cap() or
alternative_has_cap_*().
* The copy_user_highpage() and copy_highpage() functions are not used
during this window, and can safely use alternative_has_cap_*().
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which avoid generating code to test the
system_cpucaps bitmap and should be better for all subsequent calls at
runtime.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Peter Collingbourne <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
We use cpus_have_const_cap() to check for ARM64_HAS_TLB_RANGE, but this
is not necessary and alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
In the window between detecting the ARM64_HAS_TLB_RANGE cpucap and
patching alternative branches, we do not perform any TLB invalidation,
and even if we were to perform TLB invalidation here it would not be
functionally necessary to optimize this by using range invalidation.
Hence there's no need to use cpus_have_const_cap(), and
alternative_has_cap_unlikely() is sufficient.
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In __cpu_has_rng() we use cpus_have_const_cap() to check for
ARM64_HAS_RNG, but this is not necessary and alternative_has_cap_*()
would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
In the window between detecting the ARM64_HAS_RNG cpucap and patching
alternative branches, nothing which calls __cpu_has_rng() can run, and
hence it's not necessary to use cpus_have_const_cap().
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
We use cpus_have_const_cap() to check for ARM64_HAS_EPAN but this is not
necessary and alternative_has_cap() or cpus_have_cap() would be
preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The ARM64_HAS_EPAN cpucap is used to affect two things:
1) The permision bits used for userspace executable mappings, which are
chosen by adjust_protection_map(), which is an arch_initcall. This is
called after the ARM64_HAS_EPAN cpucap has been detected and
alternatives have been patched, and before any userspace translation
tables exist.
2) The handling of faults taken from (user or kernel) accesses to
userspace executable mappings in do_page_fault(). Userspace
translation tables are created after adjust_protection_map() is
called, and hence after the ARM64_HAS_EPAN cpucap has been detected
and alternatives have been patched.
Neither of these run until after ARM64_HAS_EPAN cpucap has been detected
and alternatives have been patched, and hence there's no need to use
cpus_have_const_cap(). Since adjust_protection_map() is only executed
once at boot time it would be best for it to use cpus_have_cap(), and
since do_page_fault() is executed frequently it would be best for it to
use alternatives_have_cap_unlikely().
This patch replaces the uses of cpus_have_const_cap() with
cpus_have_cap() and alternative_has_cap_unlikely(), which will avoid
generating redundant code, and should be better for all subsequent calls
at runtime. The ARM64_HAS_EPAN cpucap is added to cpucap_is_possible()
so that code can be elided entirely when this is not possible.
Signed-off-by: Mark Rutland <[email protected]>
Cc: James Morse <[email protected]>
Cc: Vladimir Murzin <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In system_uses_hw_pan() we use cpus_have_const_cap() to check for
ARM64_HAS_PAN, but this is only necessary so that the
system_uses_ttbr0_pan() check in setup_cpu_features() can run prior to
alternatives being patched, and otherwise this is not necessary and
alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The ARM64_HAS_PAN cpucap is used by system_uses_hw_pan() and
system_uses_ttbr0_pan() depending on whether CONFIG_ARM64_SW_TTBR0_PAN
is selected, and:
* We only use system_uses_hw_pan() directly in __sdei_handler(), which
isn't reachable until after alternatives have been patched, and for
this it is safe to use alternative_has_cap_*().
* We use system_uses_ttbr0_pan() in a few places:
- In check_and_switch_context() and cpu_uninstall_idmap(), which will
defer installing a translation table into TTBR0 when the
ARM64_HAS_PAN cpucap is not detected.
Prior to patching alternatives, all CPUs will be using init_mm with
the reserved ttbr0 translation tables install in TTBR0, so these can
safely use alternative_has_cap_*().
- In update_saved_ttbr0(), which will only save the active TTBR0 into
a per-thread variable when the ARM64_HAS_PAN cpucap is not detected.
Prior to patching alternatives, all CPUs will be using init_mm with
the reserved ttbr0 translation tables install in TTBR0, so these can
safely use alternative_has_cap_*().
- In efi_set_pgd(), which will handle check_and_switch_context()
deferring the installation of TTBR0 when TTBR0 PAN is detected.
The EFI runtime services are not initialized until after
alternatives have been patched, and so this can safely use
alternative_has_cap_*() or cpus_have_final_cap().
- In uaccess_ttbr0_disable() and uaccess_ttbr0_enable(), where we'll
avoid installing/uninstalling a translation table in TTBR0 when
ARM64_HAS_PAN is detected.
Prior to patching alternatives we will not perform any uaccess and
will not call uaccess_ttbr0_disable() or uaccess_ttbr0_enable(), and
so these can safely use alternative_has_cap_*() or
cpus_have_final_cap().
- In is_el1_permission_fault() where we will consider a translation
fault on a TTBR0 address to be a permission fault when ARM64_HAS_PAN
is not detected *and* we have set the PAN bit in the SPSR (which
tells us that in the interrupted context, TTBR0 pointed at the
reserved zero ttbr).
In the window between detecting system cpucaps and patching
alternatives we should not perform any accesses to TTBR0 addresses,
and no userspace translation tables exist until after patching
alternatives. Thus it is safe for this to use alternative_has_cap*().
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime.
So that the check for TTBR0 PAN in setup_cpu_features() can run prior to
alternatives being patched, the call to system_uses_ttbr0_pan() is
replaced with an explicit check of the ARM64_HAS_PAN bit in the
system_cpucaps bitmap.
Signed-off-by: Mark Rutland <[email protected]>
Cc: James Morse <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In system_uses_irq_prio_masking() we use cpus_have_const_cap() to check
for ARM64_HAS_GIC_PRIO_MASKING, but this is not necessary and
alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
When CONFIG_ARM64_PSEUDO_NMI=y the ARM64_HAS_GIC_PRIO_MASKING cpucap is
a strict boot cpu feature which is detected and patched early on the
boot cpu, which both happen in smp_prepare_boot_cpu(). In the window
between the ARM64_HAS_GIC_PRIO_MASKING cpucap is detected and
alternatives are patched we don't run any code that depends upon the
ARM64_HAS_GIC_PRIO_MASKING cpucap:
* We leave DAIF.IF set until after boot alternatives are patched, and
interrupts are unmasked later in init_IRQ(), so we cannot reach
IRQ/FIQ entry code and will not use irqs_priority_unmasked().
* We don't call any code which uses arm_cpuidle_save_irq_context() and
arm_cpuidle_restore_irq_context() during this window.
* We don't call start_thread_common() during this window.
* The local_irq_*() code in <asm/irqflags.h> depends solely on an
alternative branch since commit:
a5f61cc636f48bdf ("arm64: irqflags: use alternative branches for pseudo-NMI logic")
... and hence will use the default (DAIF-only) masking behaviour until
alternatives are patched.
* Secondary CPUs are brought up later after alternatives are patched,
and alternatives are patched on the boot CPU immediately prior to
calling init_gic_priority_masking(), so we'll correctly initialize
interrupt masking regardless.
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which avoid generating code to test the
system_cpucaps bitmap and should be better for all subsequent calls at
runtime. As this makes system_uses_irq_prio_masking() equivalent to
__irqflags_uses_pmr(), the latter is removed and replaced with the
former for consistency.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In system_supports_cnp() we use cpus_have_const_cap() to check for
ARM64_HAS_CNP, but this is only necessary so that the cpu_enable_cnp()
callback can run prior to alternatives being patched, and otherwise this
is not necessary and alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The cpu_enable_cnp() callback is run immediately after the ARM64_HAS_CNP
cpucap is detected system-wide under setup_system_capabilities(), prior
to alternatives being patched. During this window cpu_enable_cnp() uses
cpu_replace_ttbr1() to set the CNP bit for the swapper_pg_dir in TTBR1.
No other users of the ARM64_HAS_CNP cpucap need the up-to-date value
during this window:
* As KVM isn't initialized yet, kvm_get_vttbr() isn't reachable.
* As cpuidle isn't initialized yet, __cpu_suspend_exit() isn't
reachable.
* At this point all CPUs are using the swapper_pg_dir with a reserved
ASID in TTBR1, and the idmap_pg_dir in TTBR0, so neither
check_and_switch_context() nor cpu_do_switch_mm() need to do anything
special.
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime. To allow cpu_enable_cnp() to function prior to alternatives
being patched, cpu_replace_ttbr1() is split into cpu_replace_ttbr1() and
cpu_enable_swapper_cnp(), with the former only used for early TTBR1
replacement, and the latter used by both cpu_enable_cnp() and
__cpu_suspend_exit().
Signed-off-by: Mark Rutland <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Vladimir Murzin <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In icache_inval_all_pou() we use cpus_have_const_cap() to check for
ARM64_HAS_CACHE_DIC, but this is not necessary and
alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The cpus_have_const_cap() check in icache_inval_all_pou() is an
optimization to skip a redundant (but benign) IC IALLUIS + DSB ISH
sequence when all CPUs in the system have DIC. In the window between
detecting the ARM64_HAS_CACHE_DIC cpucap and patching alternative
branches there is only a single potential call to icache_inval_all_pou()
(in the alternatives patching itself), which there's no need to optimize
for at the expense of other callers.
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime. This also aligns better with the way we patch the assembly
cache maintenance sequences in arch/arm64/mm/cache.S.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In system_supports_bti() we use cpus_have_const_cap() to check for
ARM64_HAS_BTI, but this is not necessary and alternative_has_cap_*() or
cpus_have_final_*cap() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
When CONFIG_ARM64_BTI_KERNEL=y, the ARM64_HAS_BTI cpucap is a strict
boot cpu feature which is detected and patched early on the boot cpu.
All uses guarded by CONFIG_ARM64_BTI_KERNEL happen after the boot CPU
has detected ARM64_HAS_BTI and patched boot alternatives, and hence can
safely use alternative_has_cap_*() or cpus_have_final_boot_cap().
Regardless of CONFIG_ARM64_BTI_KERNEL, all other uses of ARM64_HAS_BTI
happen after system capabilities have been finalized and alternatives
have been patched. Hence these can safely use alternative_has_cap_*) or
cpus_have_final_cap().
This patch splits system_supports_bti() into system_supports_bti() and
system_supports_bti_kernel(), with the former handling where the cpucap
affects userspace functionality, and ther latter handling where the
cpucap affects kernel functionality. The use of cpus_have_const_cap() is
replaced by cpus_have_final_cap() in cpus_have_const_cap, and
cpus_have_final_boot_cap() in system_supports_bti_kernel(). This will
avoid generating code to test the system_cpucaps bitmap and should be
better for all subsequent calls at runtime. The use of
cpus_have_final_cap() and cpus_have_final_boot_cap() will make it easier
to spot if code is chaanged such that these run before the ARM64_HAS_BTI
cpucap is guaranteed to have been finalized.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In __tlbi_level() we use cpus_have_const_cap() to check for
ARM64_HAS_ARMv8_4_TTL, but this is not necessary and
alternative_has_cap_*() would be preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
In the window between detecting the ARM64_HAS_ARMv8_4_TTL cpucap and
patching alternative branches, we do not perform any TLB invalidation,
and even if we were to perform TLB invalidation here it would not be
functionally necessary to optimize this by using the TTL hint. Hence
there's no need to use cpus_have_const_cap(), and
alternative_has_cap_unlikely() is sufficient.
This patch replaces the use of cpus_have_const_cap() with
alternative_has_cap_unlikely(), which will avoid generating code to test
the system_cpucaps bitmap and should be better for all subsequent calls
at runtime.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In system_supports_address_auth() and system_supports_generic_auth() we
use cpus_have_const_cap to check for ARM64_HAS_ADDRESS_AUTH and
ARM64_HAS_GENERIC_AUTH respectively, but this is not necessary and
alternative_has_cap_*() would bre preferable.
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
The ARM64_HAS_ADDRESS_AUTH cpucap is a boot cpu feature which is
detected and patched early on the boot CPU before any pointer
authentication keys are enabled via their respective SCTLR_ELx.EN* bits.
Nothing which uses system_supports_address_auth() is called before the
boot alternatives are patched. Thus it is safe for
system_supports_address_auth() to use cpus_have_final_boot_cap() to
check for ARM64_HAS_ADDRESS_AUTH.
The ARM64_HAS_GENERIC_AUTH cpucap is a system feature which is detected
on all CPUs, then finalized and patched under
setup_system_capabilities(). We use system_supports_generic_auth() in a
few places:
* The pac_generic_keys_get() and pac_generic_keys_set() functions are
only reachable from system calls once userspace is up and running. As
cpucaps are finalzied long before userspace runs, these can safely use
alternative_has_cap_*() or cpus_have_final_cap().
* The ptrauth_prctl_reset_keys() function is only reachable from system
calls once userspace is up and running. As cpucaps are finalized long
before userspace runs, this can safely use alternative_has_cap_*() or
cpus_have_final_cap().
* The ptrauth_keys_install_user() function is used during
context-switch. This is called prior to alternatives being applied,
and so cannot use cpus_have_final_cap(), but as this only needs to
switch the APGA key for userspace tasks, it's safe to use
alternative_has_cap_*().
* The ptrauth_keys_init_user() function is used to initialize userspace
keys, and is only reachable after system cpucaps have been finalized
and patched. Thus this can safely use alternative_has_cap_*() or
cpus_have_final_cap().
* The system_has_full_ptr_auth() helper function is only used by KVM
code, which is only reachable after system cpucaps have been finalized
and patched. Thus this can safely use alternative_has_cap_*() or
cpus_have_final_cap().
This patch modifies system_supports_address_auth() to use
cpus_have_final_boot_cap() to check ARM64_HAS_ADDRESS_AUTH, and modifies
system_supports_generic_auth() to use alternative_has_cap_unlikely() to
check ARM64_HAS_GENERIC_AUTH. In either case this will avoid generating
code to test the system_cpucaps bitmap and should be better for all
subsequent calls at runtime. The use of cpus_have_final_boot_cap() will
make it easier to spot if code is chaanged such that these run before
the relevant cpucap is guaranteed to have been finalized.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Currently we have a negative cpucap which describes the *absence* of
FP/SIMD rather than *presence* of FP/SIMD. This largely works, but is
somewhat awkward relative to other cpucaps that describe the presence of
a feature, and it would be nicer to have a cpucap which describes the
presence of FP/SIMD:
* This will allow the cpucap to be treated as a standard
ARM64_CPUCAP_SYSTEM_FEATURE, which can be detected with the standard
has_cpuid_feature() function and ARM64_CPUID_FIELDS() description.
* This ensures that the cpucap will only transition from not-present to
present, reducing the risk of unintentional and/or unsafe usage of
FP/SIMD before cpucaps are finalized.
* This will allow using arm64_cpu_capabilities::cpu_enable() to enable
the use of FP/SIMD later, with FP/SIMD being disabled at boot time
otherwise. This will ensure that any unintentional and/or unsafe usage
of FP/SIMD prior to this is trapped, and will ensure that FP/SIMD is
never unintentionally enabled for userspace in mismatched big.LITTLE
systems.
This patch replaces the negative ARM64_HAS_NO_FPSIMD cpucap with a
positive ARM64_HAS_FPSIMD cpucap, making changes as described above.
Note that as FP/SIMD will now be trapped when not supported system-wide,
do_fpsimd_acc() must handle these traps in the same way as for SVE and
SME. The commentary in fpsimd_restore_current_state() is updated to
describe the new scheme.
No users of system_supports_fpsimd() need to know that FP/SIMD is
available prior to alternatives being patched, so this is updated to
use alternative_has_cap_likely() to check for the ARM64_HAS_FPSIMD
cpucap, without generating code to test the system_cpucaps bitmap.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The arm64_cpu_capabilities::cpu_enable() callbacks for SVE, SME, SME2,
and FA64 are named with an unusual "${feature}_kernel_enable" pattern
rather than the much more common "cpu_enable_${feature}". Now that we
only use these as cpu_enable() callbacks, it would be nice to have them
match the usual scheme.
This patch renames the cpu_enable() callbacks to match this scheme. At
the same time, the comment above cpu_enable_sve() is removed for
consistency with the other cpu_enable() callbacks.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
When a CPUs onlined we first probe for supported features and
propetites, and then we subsequently enable features that have been
detected. This is a little problematic for SVE and SME, as some
properties (e.g. vector lengths) cannot be probed while they are
disabled. Due to this, the code probing for SVE properties has to enable
SVE for EL1 prior to proving, and the code probing for SME properties
has to enable SME for EL1 prior to probing. We never disable SVE or SME
for EL1 after probing.
It would be a little nicer to transiently enable SVE and SME during
probing, leaving them both disabled unless explicitly enabled, as this
would make it much easier to catch unintentional usage (e.g. when they
are not present system-wide).
This patch reworks the SVE and SME feature probing code to only
transiently enable support at EL1, disabling after probing is complete.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Much of the arm64 KVM code uses cpus_have_const_cap() to check for
cpucaps, but this is unnecessary and it would be preferable to use
cpus_have_final_cap().
For historical reasons, cpus_have_const_cap() is more complicated than
it needs to be. Before cpucaps are finalized, it will perform a bitmap
test of the system_cpucaps bitmap, and once cpucaps are finalized it
will use an alternative branch. This used to be necessary to handle some
race conditions in the window between cpucap detection and the
subsequent patching of alternatives and static branches, where different
branches could be out-of-sync with one another (or w.r.t. alternative
sequences). Now that we use alternative branches instead of static
branches, these are all patched atomically w.r.t. one another, and there
are only a handful of cases that need special care in the window between
cpucap detection and alternative patching.
Due to the above, it would be nice to remove cpus_have_const_cap(), and
migrate callers over to alternative_has_cap_*(), cpus_have_final_cap(),
or cpus_have_cap() depending on when their requirements. This will
remove redundant instructions and improve code generation, and will make
it easier to determine how each callsite will behave before, during, and
after alternative patching.
KVM is initialized after cpucaps have been finalized and alternatives
have been patched. Since commit:
d86de40decaa14e6 ("arm64: cpufeature: upgrade hyp caps to final")
... use of cpus_have_const_cap() in hyp code is automatically converted
to use cpus_have_final_cap():
| static __always_inline bool cpus_have_const_cap(int num)
| {
| if (is_hyp_code())
| return cpus_have_final_cap(num);
| else if (system_capabilities_finalized())
| return __cpus_have_const_cap(num);
| else
| return cpus_have_cap(num);
| }
Thus, converting hyp code to use cpus_have_final_cap() directly will not
result in any functional change.
Non-hyp KVM code is also not executed until cpucaps have been finalized,
and it would be preferable to extent the same treatment to this code and
use cpus_have_final_cap() directly.
This patch converts instances of cpus_have_const_cap() in KVM-only code
over to cpus_have_final_cap(). As all of this code runs after cpucaps
have been finalized, there should be no functional change as a result of
this patch, but the redundant instructions generated by
cpus_have_const_cap() will be removed from the non-hyp KVM code.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
For ARM64_WORKAROUND_2658417, we use a cpu_enable() callback to hide the
ID_AA64ISAR1_EL1.BF16 ID register field. This is a little awkward as
CPUs may attempt to apply the workaround concurrently, requiring that we
protect the bulk of the callback with a raw_spinlock, and requiring some
pointless work every time a CPU is subsequently hotplugged in.
This patch makes this a little simpler by handling the masking once at
boot time. A new user_feature_fixup() function is called at the start of
setup_user_features() to mask the feature, matching the style of
elf_hwcap_fixup(). The ARM64_WORKAROUND_2658417 cpucap is added to
cpucap_is_possible() so that code can be elided entirely when this is
not possible.
Note that the ARM64_WORKAROUND_2658417 capability is matched with
ERRATA_MIDR_RANGE(), which implicitly gives the capability a
ARM64_CPUCAP_LOCAL_CPU_ERRATUM type, which forbids the late onlining of
a CPU with the erratum if the erratum was not present at boot time.
Therefore this patch doesn't change the behaviour for late onlining.
Signed-off-by: Mark Rutland <[email protected]>
Cc: James Morse <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Currently setup_cpu_features() handles a mixture of one-time kernel
feature setup (e.g. cpucaps) and one-time user feature setup (e.g. ELF
hwcaps). Subsequent patches will rework other one-time setup and expand
the logic currently in setup_cpu_features(), and in preparation for this
it would be helpful to split the kernel and user setup into separate
functions.
This patch splits setup_user_features() out of setup_cpu_features(),
with a few additional cleanups of note:
* setup_cpu_features() is renamed to setup_system_features() to make it
clear that it handles system-wide feature setup rather than cpu-local
feature setup.
* setup_system_capabilities() is folded into setup_system_features().
* Presence of TTBR0 pan is logged immediately after
update_cpu_capabilities(), so that this is guaranteed to appear
alongside all the other detected system cpucaps.
* The 'cwg' variable is removed as its value is only consumed once and
it's simpler to use cache_type_cwg() directly without assigning its
return value to a variable.
* The call to setup_user_features() is moved after alternatives are
patched, which will allow user feature setup code to depend on
alternative branches and allow for simplifications in subsequent
patches.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Suzuki K Poulose <[email protected]>
Cc: Marc Zyngier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
The cpus_have_final_cap() function can be used to test a cpucap while
also verifying that we do not consume the cpucap until system
capabilities have been finalized. It would be helpful if we could do
likewise for boot cpucaps.
This patch adds a new cpus_have_final_boot_cap() helper which can be
used to test a cpucap while also verifying that boot capabilities have
been finalized. Users will be added in subsequent patches.
Signed-off-by: Mark Rutland <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Suzuki K Poulose <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|