aboutsummaryrefslogtreecommitdiff
path: root/arch/arm64/boot
AgeCommit message (Collapse)AuthorFilesLines
2023-02-08arm64: dts: qcom: sdm670: add interconnectsRichard Acayan1-0/+56
The interconnects for Snapdragon 670 can be controlled. Add their corresponding nodes in the device tree. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230201010020.84586-2-mailingradian@gmail.com
2023-02-08arm64: dts: qcom: sm8250: Add device tree for Xiaomi Mi Pad 5 ProJianhua Lu2-0/+631
Add support for Xiaomi Mi Pad 5 Pro, codename is xiaomi-elish. This commit brings support for: * ADSP/CDSP/SLPI/VENUS * Backlight * Battery fuel gauge * Framebuffer * PCIe0 * USB2.0 Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230131123515.833-2-lujianhua000@gmail.com
2023-02-08arm64: dts: qcom: sa8540p-ride: Document i2c bussesAndrew Halaney1-0/+5
It isn't obvious in the current devicetree what is connected. Go ahead and document what's on the other end. Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Eric Chanudet <echanude@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130154823.117542-2-ahalaney@redhat.com
2023-02-08arm64: dts: qcom: sa8540p-ride: Fix some i2c pinctrl settingsAndrew Halaney1-3/+3
Some of the pinctrl groups were invalid for the selected pins. Select the proper qup group to fix these warnings: [ 6.523566] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio135" for function "qup15" [ 6.535042] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio136" for function "qup15" [ 6.597536] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio158" for function "qup15" [ 6.597544] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio159" for function "qup15" [ 6.597991] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio0" for function "qup15" [ 6.597996] sc8280xp-tlmm f100000.pinctrl: invalid group "gpio1" for function "qup15" Fixes: e073899ec3e1 ("arm64: dts: qcom: sa8540p-ride: add i2c nodes") Reviewed-by: Shazad Hussain <quic_shazhuss@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Brian Masney <bmasney@redhat.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230130154823.117542-1-ahalaney@redhat.com
2023-02-08arm64: dts: qcom: sm8550: Fix the aoss_qmp node nameAbel Vesa1-1/+1
The proper name for it is power-management. Currently, with the node name being power-controller, the bindings check fails due to the property #power-domain-cells missing. Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi") Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127131441.1157679-1-abel.vesa@linaro.org
2023-02-08arm64: dts: qcom: sm8550-mtp: correct vdd-l5-l16-supplyKrzysztof Kozlowski1-1/+1
Fix typo in vdd-l5-l16 supply of qcom,pm8550-rpmh-regulators. Fixes: 71342fb91eae ("arm64: dts: qcom: Add base SM8550 MTP dts") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127121843.349738-1-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8550: add specific SMMU compatibleKrzysztof Kozlowski1-1/+1
Generic SMMU compatibles are not allowed alone and we expect specific one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127115513.268843-1-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8450: align RPMh regulator nodes with bindingsKrzysztof Kozlowski3-12/+12
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-11-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8350: align RPMh regulator nodes with bindingsKrzysztof Kozlowski3-6/+6
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-10-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8250: align RPMh regulator nodes with bindingsKrzysztof Kozlowski4-12/+12
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-9-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8150: align RPMh regulator nodes with bindingsKrzysztof Kozlowski5-13/+13
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-8-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm7225: align RPMh regulator nodes with bindingsKrzysztof Kozlowski1-2/+2
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-7-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845: align RPMh regulator nodes with bindingsKrzysztof Kozlowski12-27/+27
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-6-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sc8280xp: align RPMh regulator nodes with bindingsKrzysztof Kozlowski2-6/+6
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-5-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sc7180: align RPMh regulator nodes with bindingsKrzysztof Kozlowski2-4/+4
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-4-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sa8295p-adp: align RPMh regulator nodes with bindingsKrzysztof Kozlowski1-3/+3
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-3-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845-xiaomi-beryllium: Add reserved memory regionAmit Pundir1-0/+6
Put cont splash memory region under the reserved-memory as confirmed by the downstream code for both Tianma and EBBG variants. Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127063355.1775246-1-amit.pundir@linaro.org
2023-02-08arm64: dts: qcom: sdm845-oneplus-*: add audio devicesCaleb Connolly3-0/+266
Populate the audio devices found on the OnePlus 6 and 6T using the sdm845-sndcard driver. Both devices have the earpiece and headphone jack connected to the WCD9341 codec. The OnePlus 6 uses the MAX98927 speaker codec which is already supported upstream. The OnePlus 6T uses a currently unsupported TFA9894 codec. Two internal microphones are supported, as well as an external headset mic. Each DAI link is expected to be used for a single device. Alsa UCM2 configs for this setup can be found here, they are not yet upstream and include support for call audio which is missing in this patch https://gitlab.com/sdm845-mainline/alsa-ucm-conf/-/tree/9ed12836b269764c4a853411d38ccb6abb70b383/ucm2/OnePlus Co-developed-by: Dylan Van Assche <me@dylanvanassche.be> Signed-off-by: Dylan Van Assche <me@dylanvanassche.be> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230125231829.2621768-1-caleb.connolly@linaro.org
2023-02-08arm64: dts: qcom: sdm845-audio-wcd9340: commonize clocksKrzysztof Kozlowski6-10/+3
Clock for WCD9340 is coming from the SoC and is the same in all users, so move it to common file to reduce the code duplication (which still allows further customizations per board). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-6-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845-audio-wcd9340: commonize pinctrlKrzysztof Kozlowski6-54/+15
Pin configuration fow WCD9340 is the same in all users, so move it to common file to reduce the code duplication (which still allows further customizations per board). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-5-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845: move codec to separate fileKrzysztof Kozlowski7-59/+75
Re-organize SDM845 audio codec into separate, audio DTSI which should be included and customized by the SDM845 boards wanting audio. The codec node is anyway not a property of the SoC, but the boards. On all others boards not using audio, keep the Slimbus node disabled as it is empty. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-4-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm850-lenovo-yoga: correct sound compatibleKrzysztof Kozlowski1-1/+1
There is dedicated compatible for Lenovo Yoga C630 sound card (documented in bindings and used by Linux driver), so use it along with a generic sound card fallback. The device is actually fully compatible with the generic one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-3-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845-xiaomi-beryllium: add generic sound compatibleKrzysztof Kozlowski1-1/+1
Use generic sound card fallback compatible, because the device is actually fully compatible with the generic one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-2-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sdm845-db845c: add generic sound compatibleKrzysztof Kozlowski1-1/+1
Use generic sound card fallback compatible, because the device is actually fully compatible with the generic one. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123084300.22353-1-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8250: Disable wsamacro and swr0 by defaultKonrad Dybcio3-0/+16
They are not used on all boards, so disable them by default. Enable them back on MTP/RB5, which were the only current users. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230124164616.228619-1-konrad.dybcio@linaro.org
2023-02-08arm64: dts: qcom: sm8550: drop incorrect cells from serialKrzysztof Kozlowski1-2/+0
The serial/UART device node does not have children with unit addresses, so address/size cells are not correct. Fixes: 377972ac743f ("arm64: dts: qcom: sm8550: add I2C Master Hub nodes") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230124084951.38195-4-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8450: drop incorrect cells from serialKrzysztof Kozlowski1-4/+0
The serial/UART device node does not have children with unit addresses, so address/size cells are not correct. Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node") Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230124084951.38195-3-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8350: drop incorrect cells from serialKrzysztof Kozlowski1-2/+0
The serial/UART device node does not have children with unit addresses, so address/size cells are not correct. Fixes: cf03cd7e12bd ("arm64: dts: qcom: sm8350: Set up WRAP0 QUPs") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230124084951.38195-2-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: use generic node name for BluetoothKrzysztof Kozlowski3-3/+3
Node names should be generic (as Devicetree spec mandates), so use "bluetooth" for BT node. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230124084951.38195-1-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm8450: Fix DSIn PHY compatibleKonrad Dybcio1-2/+2
Use the correct compatible so that the driver can probe properly. Fixes: a6dd1206e45a ("arm64: dts: qcom: sm8450: add display hardware devices") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on HDK8450 Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123200552.553181-1-konrad.dybcio@linaro.org
2023-02-08arm64: dts: qcom: ipq8074: add QFPROM nodeRobert Marko1-0/+7
IPQ8074 has efuses like other Qualcomm SoC-s that are required for determining various HW quirks which will be required later for CPR etc, so lets add the QFPROM node for start. Individidual fuses will be added as they are required. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Kathiravan T <quic_kathirav@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123101631.475712-2-robimarko@gmail.com
2023-02-08arm64: dts: qcom: sm8550: fix USB-DP PHY resetsJohan Hovold1-2/+2
The USB-DP PHY resets have been switched. Fixes: 7f7e5c1b037f ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230123101607.2413-1-johan+linaro@kernel.org
2023-02-08arm64: dts: qcom: msm8996: add CBF device entryDmitry Baryshkov1-0/+7
Add device tree node for the CBF clock. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230120061417.2623751-8-dmitry.baryshkov@linaro.org
2023-02-08arm64: dts: qcom: msm8996 switch from RPM_SMD_BB_CLK1 to RPM_SMD_XO_CLK_SRCDmitry Baryshkov1-7/+7
The vendor kernel uses RPM_SMD_XO_CLK_SRC clock as an CXO clock rather than using the RPM_SMD_BB_CLK1 directly. Follow this example and switch msm8996.dtsi to use RPM_SMD_XO_CLK_SRC clock instead of RPM_SMB_BB_CLK1. Fixes: 2b8c9c77c268 ("arm64: dts: qcom: msm8996: convert xo_board to RPM_SMD_BB_CLK1") Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230120061417.2623751-7-dmitry.baryshkov@linaro.org
2023-02-08arm64: dts: qcom: msm8996: enable UFS interconnectsDmitry Baryshkov1-0/+4
Specify interconnects to be used by the UFS host controller. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230119144326.2492847-3-dmitry.baryshkov@linaro.org
2023-02-08arm64: dts: qcom: sm6115: Add watchdog node to dtsiBhupesh Sharma1-0/+7
Add watchdog node in Qualcomm sm6115 SoC dtsi. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230119123200.1021735-1-bhupesh.sharma@linaro.org
2023-02-08arm64: dts: qcom: sc7280-idp: drop incorrect propertiesKrzysztof Kozlowski1-4/+0
The sound card does not expose DAIs and does not use custom qcom properties, so drop '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh' and 'qcom,msm-mbhc-hphl-swh': sc7280-idp.dtb: sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh', 'qcom,msm-mbhc-hphl-swh' do not match any of the regexes: '^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+' Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230119122205.73372-2-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sc7280-herobrine-audio-wcd9385: drop incorrect propertiesKrzysztof Kozlowski1-4/+0
The sound card does not expose DAIs and does not use custom qcom properties, so drop '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh' and 'qcom,msm-mbhc-hphl-swh': sc7280-herobrine-crd.dtb: sound: '#sound-dai-cells', 'qcom,msm-mbhc-gnd-swh', 'qcom,msm-mbhc-hphl-swh' do not match any of the regexes: '^dai-link@[0-9a-f]$', 'pinctrl-[0-9]+' Reported-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230119122205.73372-1-krzysztof.kozlowski@linaro.org
2023-02-08arm64: dts: qcom: sm6115: Use 64 bit addressingKonrad Dybcio1-107/+114
SM6115's SMMU uses 36bit VAs, which is a good indicator that we should increase (dma-)ranges - and by extension #address- and #size-cells to prevent things from getting lost in translation (both literally and figuratively). Do so. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230119101644.10711-2-konrad.dybcio@linaro.org
2023-02-08arm64: dts: qcom: sm6115: Add mdss_ prefix to mdss nodesKonrad Dybcio1-9/+9
Add a mdss_ prefix to mdss nodes to keep them all near each other when referencing them by label in device DTs. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230119101644.10711-1-konrad.dybcio@linaro.org
2023-02-08arm64: dts: qcom: msm8916-thwc: Add initial device treesYang Xiwen4-0/+330
This commit adds support for the ufi-001C and uf896 WiFi/LTE dongle made by Tong Heng Wei Chuang based on MSM8916. uf896 is another variant for the usb stick. The board design differs by using different gpios for the keys and leds. Note: The original firmware does not support 64-bit OS. It is necessary to flash 64-bit TZ firmware to boot arm64. Currently supported: - All CPU cores - Buttons - LEDs - Modem - SDHC - USB Device Mode - UART Co-developed-by: Jaime Breva <jbreva@nayarsystems.com> Signed-off-by: Jaime Breva <jbreva@nayarsystems.com> Co-developed-by: Nikita Travkin <nikita@trvn.ru> Signed-off-by: Nikita Travkin <nikita@trvn.ru> Signed-off-by: Yang Xiwen <forbidden405@foxmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-02-08arm64: dts: qcom: sm6115: Add geni debug uart node for qup0Bhupesh Sharma1-1/+9
qup0 on sm6115 / sm4250 has 6 SEs, with SE4 as debug uart. Add the debug uart node in sm6115 dtsi file. Cc: Bjorn Andersson <andersson@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230208122718.338545-1-bhupesh.sharma@linaro.org
2023-02-06arm64: dts: qcom: sm8550: add GPR and LPASS pin controllerKrzysztof Kozlowski1-0/+55
Add the ADSP GPR (Generic Packet Router) and LPASS LPI (Low Power Audio SubSystem Low Power Island) pin controller nodes used as part of audio subsystem on SM8550. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> [bjorn: Shortened stream mask, per Konrad's request] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230206150744.513967-1-krzysztof.kozlowski@linaro.org
2023-02-06Merge tag 'socfpga_dts_updates_for_v6.3' of ↵Arnd Bergmann3-5/+58
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA dts updates for v6.3 - Align UART node with bindings - Add pinctrl properties for Stratix10/Agilex - Change address-cells to 2 to support 64-bit address for fpga region * tag 'socfpga_dts_updates_for_v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: socfpga: change address-cells to support 64-bit addressing arm64: dts: stratix10: add i2c pins for pinctrl arm64: dts: add pinctrl-single property for Stratix10/Agilex ARM: dts: socfpga: align UART node name with bindings Link: https://lore.kernel.org/r/20230206162425.311593-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-06Merge tag 'ti-k3-dt-for-v6.3' of ↵Arnd Bergmann26-35/+3670
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt TI K3 device tree updates for v6.3 New features: J784S4 SoC and EVM support AM68 and AM69 StarterKit, phyBOARD-Electra-AM642, Siemens IoT2050 M.2 AM62A7 SK additional peripherals AM62 SK USB support Non critical fixes AM62: McSPI Clock ID fixes MMC TAP value updates J7200: pinmux range update All: Cache DT node fixes Cleanups: Reorder dts Makefile entries alphabetically * tag 'ti-k3-dt-for-v6.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (25 commits) arm64: dts: ti: Makefile: Rearrange entries alphabetically arch: arm64: dts: Add support for AM69 Starter Kit dt-bindings: arm: ti: Add binding for AM69 Starter Kit arm64: dts: ti: iot2050: Add support for M.2 variant dt-bindings: arm: ti: Add binding for Siemens IOT2050 M.2 variant arm64: dts: ti: iot2050: Add layout of OSPI flash arm64: dts: ti: k3-j7200: Fix wakeup pinmux range arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board arm64: dts: ti: Add initial support for AM68 SK System on Module dt-bindings: arm: ti: Add binding for AM68 SK arm64: dts: Update cache properties for ti arm64: dts: ti: Add support for phyBOARD-Electra-AM642 dt-bindings: arm: ti: Add bindings for PHYTEC AM64x based hardware arm64: dts: ti: k3-am62a7-sk: Enable USB1 node arm64: dts: ti: k3-am62a7-sk: Enable ethernet port arm64: dts: ti: k3-am62a-main: Add more peripheral nodes arm64: dts: ti: k3-am62a-mcu: Add MCU domain peripherals arm64: dts: ti: Add support for J784S4 EVM board arm64: dts: ti: Add initial support for J784S4 SoC dt-bindings: pinctrl: k3: Introduce pinmux definitions for J784s4 ... Link: https://lore.kernel.org/r/642cf238-43e5-d6fa-68b5-a9dfbc0277bf@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-03arm64: dts: qcom: sc7280: Add a herobrine CRD Pro SKURajendra Nayak3-0/+23
Some of the qualcomm qcard based herobrine devices can come with a Pro variant of the chipset on the qcard. Such Pro qcards have the smps9 from pm8350c ganged up with smps7 and smps8, so add a .dtsi for pro skus that deletes the smps9 node and include it from the new dts for the CRD Pro Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221216112918.1243-2-quic_rjendra@quicinc.com
2023-02-03arm64: dts: qcom: sm8450-nagara: Correct firmware pathsKonrad Dybcio1-3/+3
Nagara is definitely not SM8350, fix it! Fixes: c53532f7825c ("arm64: dts: qcom: pdx223: correct firmware paths") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230203142309.1106349-1-konrad.dybcio@linaro.org
2023-02-03arm64: dts: mediatek: mt8195: Fix vdosys* compatible stringsChen-Yu Tsai1-2/+2
When vdosys1 was initially added, it was incorrectly assumed to be compatible with vdosys0, and thus both had the same mt8195-mmsys compatible attached. This has since been corrected in commit b237efd47df7 ("dt-bindings: arm: mediatek: mmsys: change compatible for MT8195") and commit 82219cfbef18 ("dt-bindings: arm: mediatek: mmsys: add vdosys1 compatible for MT8195"). The device tree needs to be fixed as well, otherwise the vdosys1 block fails to work, and causes its dependent power domain controller to not work either. Change the compatible string of vdosys1 to "mediatek,mt8195-vdosys1". While at it, also add the new "mediatek,mt8195-vdosys0" compatible to vdosys0. Fixes: 6aa5b46d1755 ("arm64: dts: mt8195: Add vdosys and vppsys clock nodes") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20230202104014.2931517-1-wenst@chromium.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-03Merge tag 'v6.2-rockchip-dtsfixes1' of ↵Arnd Bergmann7-9/+25
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fixes to adapt to correct binding behaviour and fixes for devices on some boards Most notably may be the adaption of lower thermal limits for the pinephone pro, where the original hiher ones could result in (possibly permanent) display issues. * tag 'v6.2-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: align rk3399 DMC OPP table with bindings arm64: dts: rockchip: set sdmmc0 speed to sd-uhs-sdr50 on rock-3a arm64: dts: rockchip: fix probe of analog sound card on rock-3a arm64: dts: rockchip: add missing #interrupt-cells to rk356x pcie2x1 arm64: dts: rockchip: fix input enable pinconf on rk3399 ARM: dts: rockchip: add power-domains property to dp node on rk3288 arm64: dts: rockchip: add io domain setting to rk3566-box-demo arm64: dts: rockchip: remove unsupported property from sdmmc2 for rock-3a arm64: dts: rockchip: drop unused LED mode property from rk3328-roc-cc arm64: dts: rockchip: reduce thermal limits on rk3399-pinephone-pro arm64: dts: rockchip: use correct reset names for rk3399 crypto nodes Link: https://lore.kernel.org/r/3514663.mvXUDI8C0e@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-02-03Merge tag 'mvebu-dt64-6.3-1' of ↵Arnd Bergmann8-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt mvebu dt64 for 6.3 (part 1) Do not use anymore "marvell,armada3710" compatible string for the Armada 3720 boards. * tag 'mvebu-dt64-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: Fix compatible strings for Armada 3720 boards Link: https://lore.kernel.org/r/87zg9w9j6l.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Powered by cgit, Gruvboxed by Blaster4385.