aboutsummaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
AgeCommit message (Collapse)AuthorFilesLines
2023-02-08arm64: dts: qcom: sm8350: align RPMh regulator nodes with bindingsKrzysztof Kozlowski1-2/+2
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-10-krzysztof.kozlowski@linaro.org
2023-01-18arm64: dts: qcom: use qcom,gsi-loader for IPAAlex Elder1-2/+2
Depending on the platform, either the modem or the AP must load GSI firmware for IPA before it can be used. To date, this has been indicated by the presence or absence of a "modem-init" property. That mechanism has been deprecated. Instead, we indicate how GSI firmware should be loaded by the value of the "qcom,gsi-loader" property. Update all arm64 platforms that use IPA to use the "qcom,gsi-loader" property to specify how the GSI firmware is loaded. Update the affected nodes so the status property is last. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> [bjorn: Moved sc7280 change herobrine-lte-sku] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221231002716.2367375-3-elder@linaro.org
2021-11-20arm64: dts: qcom: *8350* Consolidate PON/RESIN usageKonrad Dybcio1-0/+9
Disable PON/RESIN keys by default and keep the RESIN keycode set-per-board, as these settings are not common between devices (one cannot even assume all devices have buttons nowadays..). Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211114012755.112226-7-konrad.dybcio@somainline.org
2021-11-20arm64: dts: qcom: sm8350: Move gpio.h inclusion to SoC DTSIKonrad Dybcio1-1/+0
Almost any board that boots and has a way to interact with it (say for the rare cases of just-pstore or let's-rely-on-bootloader-setup) needs to set some GPIOs, so it makes no sense to include gpio.h separately each time. Hence move it to SoC DTSI. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211114012755.112226-1-konrad.dybcio@somainline.org
2021-10-24arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHYShawn Guo1-2/+0
The following properties are not supported and causing dtbs_check warnings. - vdda-phy-max-microamp - vdda-pll-max-microamp - vddp-ref-clk-max-microamp - vddp-ref-clk-always-on Drop them from QMP PHY nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-6-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: pmk8350: Make RTC disabled by default; enable on sc7280-idpDouglas Anderson1-0/+4
The RTC on the pmk8350 is not useful on all boards. Some boards may not provide backup power to the PMIC but might have another RTC on the board that does have backup power. In this case it's better to not use the RTC on the PMIC. At the moment, the only boards that includes this PMIC are sc7280-idp and sc7280-idp2. On sc7280-idp I'm not aware of any other RTCs, but sc7280-idp2 has a Chrome OS EC on it and this is intended to provide the RTC for the AP. Let's do what we normally do for hardware that's not used by all boards and set it to a default status of "disabled" and then enable it on the boards that need it. NOTE: for sc7280-idp it's _possible_ we might also want to add `allow-set-time;`. That could be the subject of a future patch if it is indeed true. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Satya Priya <skakit@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> [bjorn: Enable the RTC on the MTP as well] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929153553.1.Ib44c2ac967833d7a3f51452d44d15b7b8d23c1f0@changeid
2021-08-05arm64: dts: qcom: sm8350: Rename GENI serial engine DT nodeRobert Foss1-1/+1
In order to conform with downstream and upstream for previous generations of this hardware, rename dt-node 'qupv3_id_1' to 'qupv3_id_0'. Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC") Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://lore.kernel.org/r/20210803125756.93824-1-robert.foss@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: sm8350-mtp: enable IPAAlex Elder1-0/+6
Enable IPA for the SM8350 MTP. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20210413170553.1778792-3-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-12arm64: dts: qcom: sm8350-mtp: Add PMICsVinod Koul1-0/+6
SM8350-MTP features PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B. PMICs Add the dtsi for these PMICs to MTP. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210312052737.3558801-9-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11arm64: dts: qcom: sm8350-mtp: Enable remoteprocsVinod Koul1-0/+20
This enabled the four remoteprocs found in SM8350, audio, compute, modem and sensor for MTP platform and adds firmware for them. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210212115532.1339942-7-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11arm64: dts: qcom: sm8350-mtp: add regulator namesVinod Koul1-0/+27
Add the property "regulator-names" to the regulators as given in schematics so that it is easier to understand the regulators being used Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210204170907.63545-7-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11arm64: dts: qcom: sm8350-mtp: enable UFS nodesVinod Koul1-0/+21
Enabled the UFS node found in SM8350-MTP platform, also add the regulators associated with UFS HC and UFS phy to these nodes. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210204170907.63545-6-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-03-11arm64: dts: qcom: sm8350-mtp: enable USB nodesJack Pham1-0/+42
Enable both USB controllers and associated hsphy and qmp phy nodes on sm8350 MTP. Designate the usb_1 instance as peripheral-mode only until proper PMIC based Type-C dual-role handling is supported. TODO: the second USB controller is exposed to a microAB port. Dual- role can be supported for this by adding the "usb-role-switch" property as well as defining a USB connector node with a "gpio-usb-b-connector" compatible. However, this requires GPIO support from PM8350 which is still missing. Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210116013802.1609-3-jackp@codeaurora.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210204170907.63545-4-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02arm64: dts: qcom: Add basic devicetree support for SM8350-MTP boardVinod Koul1-0/+250
Add basic devicetree support for Qualcomm Technologies, Inc SM8350 SoC MTP board. This enabled uart node and adds rpmh-regulators present for this board. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210127123054.263231-7-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Powered by cgit, Gruvboxed by Blaster4385.