aboutsummaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts/qcom/sm8150-mtp.dts
AgeCommit message (Collapse)AuthorFilesLines
2023-04-07arm64: dts: qcom: sm8150: Don't start Adreno in headless modeKonrad Dybcio1-0/+5
Now that there's display support, there is no reason to assume the default mode for Adreno should be headless. Keep it like that for boards that previously enabled it, so as not to create regressions though. Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # On Sony Xperia 5 Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230331-topic-konahana_speedbin-v3-3-2dede22dd7f7@linaro.org
2023-02-08arm64: dts: qcom: sm8150: align RPMh regulator nodes with bindingsKrzysztof Kozlowski1-3/+3
Device node names should be generic and bindings expect certain pattern for RPMh regulator nodes. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230127114347.235963-8-krzysztof.kozlowski@linaro.org
2021-10-24arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHYShawn Guo1-2/+0
The following properties are not supported and causing dtbs_check warnings. - vdda-phy-max-microamp - vdda-pll-max-microamp - vddp-ref-clk-max-microamp - vddp-ref-clk-always-on Drop them from QMP PHY nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-6-shawn.guo@linaro.org
2021-08-04arm64: dts: qcom: sm8150-mtp: Add 8150 compatible stringThara Gopinath1-1/+1
Add "qcom,sm8150" as one of the platform compatible strings. This will be later used by cpufreq-dt-platdev to exclude using cpufreq-dt cpufreq driver. Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210804133223.2503517-1-thara.gopinath@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-15arm64: dts: qcom: sm8[12]50-pm8150: Move RESIN to pm8150 dtsiKonrad Dybcio1-11/+7
It's not worth duplicating the same node over and over and over and over again, so let's keep the common bits in the pm8150 DTSI, making only changing the status and keycode necessary. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210613124822.124039-1-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-15arm64: dts: qcom: sm8150: Disable Adreno and modem by defaultKonrad Dybcio1-1/+9
Components that rely on proprietary (not to mention signed!) firmware should not be enabled by default, as lack of the aforementioned firmware could cause various issues, from random errors to straight-up failing to boot. Not enabling modem back on the HDK, as it uses a sa8150. Also fixed a sorting mistake in both boards' dt while at it. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210611203301.101067-1-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24arm64: dts: qcom: sm8150-mtp: Enable WiFi nodeJonathan Marek1-0/+9
Enable the WiFi node and specify its supply regulators. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> [bjorn: Extracted patch from larger HDK patch] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201121055808.582401-2-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-24arm64: dts: qcom: sm8150-mtp: Specify remoteproc firmwareBjorn Andersson1-0/+8
Point the various remoteprocs of SM8150 MTP to a place with the platform specific firmware. Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20201121055603.582281-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-06-21arm64: dts: qcom: sm8150: Add USB and PHY device nodesJack Pham1-0/+21
Add device nodes for the USB3 controller, QMP SS PHY and SNPS HS PHY. Signed-off-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Tested-by: Vinod Koul <vinod.koul@linaro.org> Link: https://lore.kernel.org/r/1586566362-21450-3-git-send-email-wcheng@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-01-05arm64: dts: qcom: sm8150-mtp: Add UFS gpio resetVinod Koul1-0/+3
Add the reset-gpio for UFS for sm8150-mtp. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200106070826.147064-2-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-17arm64: dts: qcom: sm8150: Add ADSP, CDSP, MPSS and SLPI remoteprocsSibi Sankar1-0/+12
Add ADSP, CDSP, MPSS and SLPI device tree nodes for SM8150 SoC. Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/20191217092503.10699-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-12-10arm64: dts: qcom: sm8150-mtp: Enable UFS nodesVinod Koul1-0/+20
Enable the UFS HC and phy nodes and add regulators used by these. Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191106084656.1749954-2-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: dts: qcom: sm8150-mtp: Add regulatorsVinod Koul1-0/+324
Add the regulators found in the mtp platform. This platform consists of pmic PM8150, PM8150L and PM8009. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2019-08-21arm64: dts: qcom: sm8150-mtp: Add base dts fileVinod Koul1-0/+51
This add base DTS file for sm8150-mtp and enables boot to console, adds tlmm reserved range, resin node, volume down key and also includes pmic file. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Powered by cgit, Gruvboxed by Blaster4385.