| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This ARM11 SMP configuration was one of the first SMP configurations
the ARM kernel supported, but it has the downside of odd DMA handling,
odd cache tagging, and often (as of recent) completely broken cache
handling on the ARM RealView PB11MPCore test chips. To boot the
platform it was necessary to completely disable the cache.
When it comes to the EB 11MPCore it is unclear if this ever worked.
These reference designs are now the only ARMv6K SMP platforms.
As only reference designs of purely academic interest remain, and
since the special-cased DMA and PMU code is hard to maintain and
doesn't really work, it is not really worth our time.
Delete the ARM11MPCore support along with:
- The special DMA quirk CONFIG_DMA_CACHE_RWFO that is only used
on ARMv6K SMP, and we are the last ARMV6K system leaving the
building and the cache handling is awkward, so good-bye.
- The special PMU handling that was only used by ARM11MPCore.
The following is left behind:
- TIMER_OF_DECLARE(arm_twd_11mp, "arm,arm11mp-twd-timer", ...)
in arch/arm/kernel/smp_twd.c, this is still in use by Marvell MMP3
arch/arm/boot/dts/marvell/mmp3.dtsi
- IRQCHIP_DECLARE(arm11mp_gic, "arm,arm11mp-gic", ...)
in drivers/irqchip/irq-gic.c, this is still in use by Marvell MMP3
arch/arm/boot/dts/marvell/mmp3.dtsi
- A compatible for the arm11mpcore SCU, since this was mistakedly
used for the Cortex-A9 version of RealView EB.
These are unfortunate but will need to be kept around for
compatibility. New Marvell-specific compatibles should however probably
be added.
Acked-by: Mark Rutland <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
This is not being used to pass ops, it is just a way to tell if an
iommu driver was probed. These days this can be detected directly via
device_iommu_mapped(). Call device_iommu_mapped() in the two places that
need to check it and remove the iommu parameter everywhere.
Reviewed-by: Jerry Snitselaar <[email protected]>
Reviewed-by: Lu Baolu <[email protected]>
Reviewed-by: Moritz Fischer <[email protected]>
Acked-by: Christoph Hellwig <[email protected]>
Acked-by: Rob Herring <[email protected]>
Tested-by: Hector Martin <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
kasan_pte_populate fill KASAN_SHADOW_INIT in the newly
allocated shadow page, so it's unnecessary to
use memblock_alloc_try_nid, which always zero the
new allocated memory.
Use memblock_alloc_try_nid_raw instead of
memblock_alloc_try_nid like arm64 does which
can make kasan init faster.
Signed-off-by: Mark-PK Tsai <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Attempt VMA lock-based page fault handling first, and fall back to the
existing mmap_lock-based handling if that fails, the ebizzy benchmark
shows 25% improvement on qemu with 2 cpus.
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Fix kernel-doc warning(s) as reported by lkp:
arch/arm/mm/cache-uniphier.c:72: warning: cannot understand function prototype: 'struct uniphier_cache_data '
cache-uniphier.c:82: warning: Function parameter or member 'way_ctrl_base' not described in 'uniphier_cache_data'
Fixes: e7ecbc057bc5 ("ARM: uniphier: add outer cache support")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: kernel test robot <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Olof Johansson <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Kunihiko Hayashi <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Link: lore.kernel.org/r/[email protected] # fixes only one item
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Pull ARM updates from Russell King:
- Refactor VFP code and convert to C code (Ard Biesheuvel)
- Fix hardware breakpoint single-stepping using bpf_overflow_handler
- Make SMP stop calls asynchronous allowing panic from irq context to
work
- Fix for kernel-doc warnings for locomo
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
Revert part of ae1f8d793a19 ("ARM: 9304/1: add prototype for function called only from asm")
ARM: 9318/1: locomo: move kernel-doc to prevent warnings
ARM: 9317/1: kexec: Make smp stop calls asynchronous
ARM: 9316/1: hw_breakpoint: fix single-stepping when using bpf_overflow_handler
ARM: entry: Make asm coproc dispatch code NWFPE only
ARM: iwmmxt: Use undef hook to enable coprocessor for task
ARM: entry: Disregard Thumb undef exception in coproc dispatch
ARM: vfp: Use undef hook for handling VFP exceptions
ARM: kernel: Get rid of thread_info::used_cp[] array
ARM: vfp: Reimplement VFP exception entry in C code
ARM: vfp: Remove workaround for Feroceon CPUs
ARM: vfp: Record VFP bounces as perf emulation faults
|
|
Add set_ptes(), update_mmu_cache_range(), flush_dcache_folio() and
flush_icache_pages(). Change the PG_dcache_clear flag from being per-page
to per-folio which makes __dma_page_dev_to_cpu() a bit more exciting.
Also add flush_cache_pages(), even though this isn't used by generic code
(yet?)
[[email protected]: fix potential endless loop in __dma_page_dev_to_cpu()]
Link: https://lkml.kernel.org/r/[email protected]
[[email protected]: fix folio conversion in __dma_page_dev_to_cpu()]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Marek Szyprowski <[email protected]>
Acked-by: Mike Rapoport (IBM) <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "New page table range API", v6.
This patchset changes the API used by the MM to set up page table entries.
The four APIs are:
set_ptes(mm, addr, ptep, pte, nr)
update_mmu_cache_range(vma, addr, ptep, nr)
flush_dcache_folio(folio)
flush_icache_pages(vma, page, nr)
flush_dcache_folio() isn't technically new, but no architecture
implemented it, so I've done that for them. The old APIs remain around
but are mostly implemented by calling the new interfaces.
The new APIs are based around setting up N page table entries at once.
The N entries belong to the same PMD, the same folio and the same VMA, so
ptep++ is a legitimate operation, and locking is taken care of for you.
Some architectures can do a better job of it than just a loop, but I have
hesitated to make too deep a change to architectures I don't understand
well.
One thing I have changed in every architecture is that PG_arch_1 is now a
per-folio bit instead of a per-page bit when used for dcache clean/dirty
tracking. This was something that would have to happen eventually, and it
makes sense to do it now rather than iterate over every page involved in a
cache flush and figure out if it needs to happen.
The point of all this is better performance, and Fengwei Yin has measured
improvement on x86. I suspect you'll see improvement on your architecture
too. Try the new will-it-scale test mentioned here:
https://lore.kernel.org/linux-mm/[email protected]/
You'll need to run it on an XFS filesystem and have
CONFIG_TRANSPARENT_HUGEPAGE set.
This patchset is the basis for much of the anonymous large folio work
being done by Ryan, so it's received quite a lot of testing over the last
few months.
This patch (of 38):
Determine if a value lies within a range more efficiently (subtraction +
comparison vs two comparisons and an AND). It also has useful (under some
circumstances) behaviour if the range exceeds the maximum value of the
type. Convert all the conflicting definitions of in_range() within the
kernel; some can use the generic definition while others need their own
definition.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
As part of the conversions to replace pgtable constructor/destructors with
ptdesc equivalents, convert various page table functions to use ptdescs.
late_alloc() also uses the __get_free_pages() helper function. Convert
this to use pagetable_alloc() and ptdesc_address() instead to help
standardize page tables further.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Vishal Moola (Oracle) <[email protected]>
Acked-by: Mike Rapoport (IBM) <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Instead of pte_lockptr(), use the recently added pte_offset_map_nolock()
in adjust_pte(): because it gives the not-locked ptl for precisely that
pte, which the caller can then safely lock; whereas pte_lockptr() is not
so tightly coupled, because it dereferences the pmd pointer again.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Alistair Popple <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Gerald Schaefer <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Huang, Ying <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Lorenzo Stoakes <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Miaohe Lin <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Pavel Tatashin <[email protected]>
Cc: Peter Xu <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Qi Zheng <[email protected]>
Cc: Ralph Campbell <[email protected]>
Cc: Russell King <[email protected]>
Cc: SeongJae Park <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Steven Price <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Thomas Hellström <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vishal Moola (Oracle) <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yang Shi <[email protected]>
Cc: Yu Zhao <[email protected]>
Cc: Zack Rusin <[email protected]>
Cc: Zi Yan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync and
are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type checking,
forcing the use of pointers"
* tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: Remove file path comments from headers
tools arch: Remove uapi bitsperlong.h of hexagon and microblaze
asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
m68k/mm: Make pfn accessors static inlines
arm64: memory: Make virt_to_pfn() a static inline
ARM: mm: Make virt_to_pfn() a static inline
asm-generic/page.h: Make pfn accessors static inlines
xen/netback: Pass (void *) to virt_to_page()
netfs: Pass a pointer to virt_to_page()
cifs: Pass a pointer to virt_to_page() in cifsglob
cifs: Pass a pointer to virt_to_page()
riscv: mm: init: Pass a pointer to virt_to_page()
ARC: init: Pass a pointer to virt_to_pfn() in init
m68k: Pass a pointer to virt_to_pfn() virt_to_page()
fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
|
|
This modifies our user mode stack expansion code to always take the
mmap_lock for writing before modifying the VM layout.
It's actually something we always technically should have done, but
because we didn't strictly need it, we were being lazy ("opportunistic"
sounds so much better, doesn't it?) about things, and had this hack in
place where we would extend the stack vma in-place without doing the
proper locking.
And it worked fine. We just needed to change vm_start (or, in the case
of grow-up stacks, vm_end) and together with some special ad-hoc locking
using the anon_vma lock and the mm->page_table_lock, it all was fairly
straightforward.
That is, it was all fine until Ruihan Li pointed out that now that the
vma layout uses the maple tree code, we *really* don't just change
vm_start and vm_end any more, and the locking really is broken. Oops.
It's not actually all _that_ horrible to fix this once and for all, and
do proper locking, but it's a bit painful. We have basically three
different cases of stack expansion, and they all work just a bit
differently:
- the common and obvious case is the page fault handling. It's actually
fairly simple and straightforward, except for the fact that we have
something like 24 different versions of it, and you end up in a maze
of twisty little passages, all alike.
- the simplest case is the execve() code that creates a new stack.
There are no real locking concerns because it's all in a private new
VM that hasn't been exposed to anybody, but lockdep still can end up
unhappy if you get it wrong.
- and finally, we have GUP and page pinning, which shouldn't really be
expanding the stack in the first place, but in addition to execve()
we also use it for ptrace(). And debuggers do want to possibly access
memory under the stack pointer and thus need to be able to expand the
stack as a special case.
None of these cases are exactly complicated, but the page fault case in
particular is just repeated slightly differently many many times. And
ia64 in particular has a fairly complicated situation where you can have
both a regular grow-down stack _and_ a special grow-up stack for the
register backing store.
So to make this slightly more manageable, the bulk of this series is to
first create a helper function for the most common page fault case, and
convert all the straightforward architectures to it.
Thus the new 'lock_mm_and_find_vma()' helper function, which ends up
being used by x86, arm, powerpc, mips, riscv, alpha, arc, csky, hexagon,
loongarch, nios2, sh, sparc32, and xtensa. So we not only convert more
than half the architectures, we now have more shared code and avoid some
of those twisty little passages.
And largely due to this common helper function, the full diffstat of
this series ends up deleting more lines than it adds.
That still leaves eight architectures (ia64, m68k, microblaze, openrisc,
parisc, s390, sparc64 and um) that end up doing 'expand_stack()'
manually because they are doing something slightly different from the
normal pattern. Along with the couple of special cases in execve() and
GUP.
So there's a couple of patches that first create 'locked' helper
versions of the stack expansion functions, so that there's a obvious
path forward in the conversion. The execve() case is then actually
pretty simple, and is a nice cleanup from our old "grow-up stackls are
special, because at execve time even they grow down".
The #ifdef CONFIG_STACK_GROWSUP in that code just goes away, because
it's just more straightforward to write out the stack expansion there
manually, instead od having get_user_pages_remote() do it for us in some
situations but not others and have to worry about locking rules for GUP.
And the final step is then to just convert the remaining odd cases to a
new world order where 'expand_stack()' is called with the mmap_lock held
for reading, but where it might drop it and upgrade it to a write, only
to return with it held for reading (in the success case) or with it
completely dropped (in the failure case).
In the process, we remove all the stack expansion from GUP (where
dropping the lock wouldn't be ok without special rules anyway), and add
it in manually to __access_remote_vm() for ptrace().
Thanks to Adrian Glaubitz and Frank Scheiner who tested the ia64 cases.
Everything else here felt pretty straightforward, but the ia64 rules for
stack expansion are really quite odd and very different from everything
else. Also thanks to Vegard Nossum who caught me getting one of those
odd conditions entirely the wrong way around.
Anyway, I think I want to actually move all the stack expansion code to
a whole new file of its own, rather than have it split up between
mm/mmap.c and mm/memory.c, but since this will have to be backported to
the initial maple tree vma introduction anyway, I tried to keep the
patches _fairly_ minimal.
Also, while I don't think it's valid to expand the stack from GUP, the
final patch in here is a "warn if some crazy GUP user wants to try to
expand the stack" patch. That one will be reverted before the final
release, but it's left to catch any odd cases during the merge window
and release candidates.
Reported-by: Ruihan Li <[email protected]>
* branch 'expand-stack':
gup: add warning if some caller would seem to want stack expansion
mm: always expand the stack with the mmap write lock held
execve: expand new process stack manually ahead of time
mm: make find_extend_vma() fail if write lock not held
powerpc/mm: convert coprocessor fault to lock_mm_and_find_vma()
mm/fault: convert remaining simple cases to lock_mm_and_find_vma()
arm/mm: Convert to using lock_mm_and_find_vma()
riscv/mm: Convert to using lock_mm_and_find_vma()
mips/mm: Convert to using lock_mm_and_find_vma()
powerpc/mm: Convert to using lock_mm_and_find_vma()
arm64/mm: Convert to using lock_mm_and_find_vma()
mm: make the page fault mmap locking killable
mm: introduce new 'lock_mm_and_find_vma()' page fault helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
|
|
Pull arm documentation move from Jonathan Corbet:
"Move the Arm architecture documentation under Documentation/arch/.
This brings some order to the documentation directory, declutters the
top-level directory, and makes the documentation organization more
closely match that of the source"
* tag 'docs-arm-move' of git://git.lwn.net/linux:
dt-bindings: Update Documentation/arm references
docs: update some straggling Documentation/arm references
crypto: update some Arm documentation references
mips: update a reference to a moved Arm Document
arm64: Update Documentation/arm references
arm: update in-source documentation references
arm: docs: Move Arm documentation to Documentation/arch/
|
|
arm has an additional check for address < FIRST_USER_ADDRESS before
expanding the stack. Since FIRST_USER_ADDRESS is defined everywhere
(generally as 0), move that check to the generic expand_downwards().
Signed-off-by: Ben Hutchings <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "arch: allow pte_offset_map[_lock]() to fail", v2.
What is it all about? Some mmap_lock avoidance i.e. latency reduction.
Initially just for the case of collapsing shmem or file pages to THPs; but
likely to be relied upon later in other contexts e.g. freeing of empty
page tables (but that's not work I'm doing). mmap_write_lock avoidance
when collapsing to anon THPs? Perhaps, but again that's not work I've
done: a quick attempt was not as easy as the shmem/file case.
I would much prefer not to have to make these small but wide-ranging
changes for such a niche case; but failed to find another way, and have
heard that shmem MADV_COLLAPSE's usefulness is being limited by that
mmap_write_lock it currently requires.
These changes (though of course not these exact patches, and not all of
these architectures!) have been in Google's data centre kernel for three
years now: we do rely upon them.
What are the per-arch changes about? Generally, two things.
One: the current mmap locking may not be enough to guard against that
tricky transition between pmd entry pointing to page table, and empty pmd
entry, and pmd entry pointing to huge page: pte_offset_map() will have to
validate the pmd entry for itself, returning NULL if no page table is
there. What to do about that varies: often the nearby error handling
indicates just to skip it; but in some cases a "goto again" looks
appropriate (and if that risks an infinite loop, then there must have been
an oops, or pfn 0 mistaken for page table, before).
Deeper study of each site might show that 90% of them here in arch code
could only fail if there's corruption e.g. a transition to THP would be
surprising on an arch without HAVE_ARCH_TRANSPARENT_HUGEPAGE. But given
the likely extension to freeing empty page tables, I have not limited this
set of changes to THP; and it has been easier, and sets a better example,
if each site is given appropriate handling.
Two: pte_offset_map() will need to do an rcu_read_lock(), with the
corresponding rcu_read_unlock() in pte_unmap(). But most architectures
never supported CONFIG_HIGHPTE, so some don't always call pte_unmap()
after pte_offset_map(), or have used userspace pte_offset_map() where
pte_offset_kernel() is more correct. No problem in the current tree, but
a problem once an rcu_read_unlock() will be needed to keep balance.
A common special case of that comes in arch/*/mm/hugetlbpage.c, if the
architecture supports hugetlb pages down at the lowest PTE level.
huge_pte_alloc() uses pte_alloc_map(), but generic hugetlb code does no
corresponding pte_unmap(); similarly for huge_pte_offset().
In rare transient cases, not yet made possible, pte_offset_map() and
pte_offset_map_lock() may not find a page table: handle appropriately.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Hugh Dickins <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Alexandre Ghiti <[email protected]>
Cc: Aneesh Kumar K.V <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: John David Anglin <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport (IBM) <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Qi Zheng <[email protected]>
Cc: Russell King <[email protected]>
Cc: Suren Baghdasaryan <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The function definition is in a file that does not include the
header with the declaration:
arch/arm/kernel/tcm.c:256:13: error: no previous prototype for 'tcm_init'
Move the declaration to a global header where it can actually be
included.
Fixes: de40614e92bf ("ARM: 7694/1: ARM, TCM: initialize TCM in paging_init(), instead of setup_arch()")
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
setup_mm_for_reboot() is declared in asm/idmap.h but that is not included
for the definition, causing a W=1 warning:
arch/arm/mm/nommu.c:178:6: error: no previous prototype for 'setup_mm_for_reboot' [-Werror=missing-prototypes]
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
The prototype for __flush_anon_page() is intentionally hidden
inside the flush_anon_page() inline function to prevent it from
being called from drivers.
When building with 'W=1', this causes a warning:
arch/arm/mm/flush.c:358:6: error: no previous prototype for '__flush_anon_page' [-Werror=missing-prototypes]
Work around this by adding a prototype directly next to the function
definition.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
When building with 'make W=1', the compiler warns about any function
definition that does not come with a prototype in a header, to ensure
it matches what the caller expects.
This includes functions that are only ever caller from assembly
code and don't technically need a declaration:
arch/arm/kernel/ftrace.c:227:6: error: no previous prototype for 'prepare_ftrace_return'
arch/arm/kernel/ptrace.c:850:16: error: no previous prototype for 'syscall_trace_enter'
arch/arm/kernel/ptrace.c:878:17: error: no previous prototype for 'syscall_trace_exit'
arch/arm/kernel/signal.c:601:1: error: no previous prototype for 'do_work_pending'
arch/arm/kernel/signal.c:672:17: error: no previous prototype for 'do_rseq_syscall'
arch/arm/kernel/suspend.c:75:6: error: no previous prototype for '__cpu_suspend_save'
arch/arm/kernel/traps.c:451:17: error: no previous prototype for 'do_undefinstr'
arch/arm/kernel/traps.c:516:39: error: no previous prototype for 'handle_fiq_as_nmi'
arch/arm/kernel/traps.c:535:17: error: no previous prototype for 'bad_mode'
arch/arm/kernel/traps.c:608:16: error: no previous prototype for 'arm_syscall'
arch/arm/kernel/traps.c:734:1: error: no previous prototype for 'baddataabort'
arch/arm/kernel/traps.c:774:17: error: no previous prototype for '__div0'
arch/arm/kernel/traps.c:97:6: error: no previous prototype for 'dump_backtrace_stm'
arch/arm/kernel/unwind.c:40:6: error: no previous prototype for '__aeabi_unwind_cpp_pr0'
arch/arm/kernel/unwind.c:45:6: error: no previous prototype for '__aeabi_unwind_cpp_pr1'
arch/arm/kernel/unwind.c:50:6: error: no previous prototype for '__aeabi_unwind_cpp_pr2'
arch/arm/mm/fault.c:554:1: error: no previous prototype for 'do_DataAbort'
arch/arm/mm/fault.c:584:1: error: no previous prototype for 'do_PrefetchAbort'
arch/arm/mm/proc-v7-bugs.c:280:6: error: no previous prototype for 'cpu_v7_ca8_ibe'
arch/arm/mm/proc-v7-bugs.c:293:6: error: no previous prototype for 'cpu_v7_bugs_init'
arch/arm/vdso/vgettimeofday.c:36:6: error: no previous prototype for '__aeabi_unwind_cpp_pr0'
arch/arm/vdso/vgettimeofday.c:40:6: error: no previous prototype for '__aeabi_unwind_cpp_pr1'
arch/arm/vdso/vgettimeofday.c:44:6: error: no previous prototype for '__aeabi_unwind_cpp_pr2'
arch/arm/vfp/vfpmodule.c:323:6: error: no previous prototype for 'VFP_bounce'
Add the prototypes anyway, to allow enabling this warning by default in
the future.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
The dma_contiguous_early_fixup() function is a global __weak stub
with an arm specific override, but the declaration is in an #ifdef.
If CONFIG_DMA_CMA is disabled, there is no caller and no prototype,
which adds a warning for the definition:
arm/mm/dma-mapping.c:261:13: error: no previous prototype for 'dma_contiguous_early_fixup' [-Werror=missing-prototypes]
Enclose the definition in the same #ifdef as the prototype to avoid
that and save a few bytes of .init.text.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
The Arm documentation has moved to Documentation/arch/arm; update
references within arch/arm to match.
Cc: Russell King <[email protected]>
Cc: Alim Akhtar <[email protected]>
Cc: Patrice Chotard <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
Doing this is a bit intrusive: virt_to_pfn() requires
PHYS_PFN_OFFSET and PAGE_SHIFT to be defined, and this is defined in
<asm/page.h>, so this must be included *before* <asm/memory.h>.
The use of macros were obscuring the unclear inclusion order here,
as the macros would eventually be resolved, but a static inline
like this cannot be compiled with unresolved macros.
The naive solution to include <asm/page.h> at the top of
<asm/memory.h> does not work, because <asm/memory.h> sometimes
includes <asm/page.h> at the end of itself, which would create a
confusing inclusion loop. So instead, take the approach to always
unconditionally include <asm/page.h> at the end of <asm/memory.h>
arch/arm uses <asm/memory.h> explicitly in a lot of places,
however it turns out that if we just unconditionally include
<asm/memory.h> into <asm/page.h> and switch all inclusions of
<asm/memory.h> to <asm/page.h> instead, we enforce the right
order and <asm/memory.h> will always have access to the
definitions.
Put an inclusion guard in place making it impossible to include
<asm/memory.h> explicitly.
Link: https://lore.kernel.org/linux-mm/[email protected]/
Signed-off-by: Linus Walleij <[email protected]>
|
|
Feroceon CPUs have a non-standard implementation of VFP which reports
synchronous VFP exceptions using the async VFP flag. This requires a
workaround which is difficult to reconcile with other implementations,
making it tricky to support both versions in a single image.
Since this is a v5 CPU, it is not supported by armhf and so the
likelihood that anybody is using this with recent distros/kernels and
rely on the VFP at the same time is extremely low. So let's just disable
VFP support on these cores, so we can remove the workaround.
This will help future development to support v5 and v6 CPUs with a
single kernel image.
Reviewed-by: Linus Walleij <[email protected]>
Acked-by: Nicolas Pitre <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.4-rc1.
Once again, a busy development cycle, with lots of changes happening
in the driver core in the quest to be able to move "struct bus" and
"struct class" into read-only memory, a task now complete with these
changes.
This will make the future rust interactions with the driver core more
"provably correct" as well as providing more obvious lifetime rules
for all busses and classes in the kernel.
The changes required for this did touch many individual classes and
busses as many callbacks were changed to take const * parameters
instead. All of these changes have been submitted to the various
subsystem maintainers, giving them plenty of time to review, and most
of them actually did so.
Other than those changes, included in here are a small set of other
things:
- kobject logging improvements
- cacheinfo improvements and updates
- obligatory fw_devlink updates and fixes
- documentation updates
- device property cleanups and const * changes
- firwmare loader dependency fixes.
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
device property: make device_property functions take const device *
driver core: update comments in device_rename()
driver core: Don't require dynamic_debug for initcall_debug probe timing
firmware_loader: rework crypto dependencies
firmware_loader: Strip off \n from customized path
zram: fix up permission for the hot_add sysfs file
cacheinfo: Add use_arch[|_cache]_info field/function
arch_topology: Remove early cacheinfo error message if -ENOENT
cacheinfo: Check cache properties are present in DT
cacheinfo: Check sib_leaf in cache_leaves_are_shared()
cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
cacheinfo: Add arm64 early level initializer implementation
cacheinfo: Add arch specific early level initializer
tty: make tty_class a static const structure
driver core: class: remove struct class_interface * from callbacks
driver core: class: mark the struct class in struct class_interface constant
driver core: class: make class_register() take a const *
driver core: class: mark class_release() as taking a const *
driver core: remove incorrect comment for device_create*
MIPS: vpe-cmp: remove module owner pointer from struct class usage.
...
|
|
ARMv8 is a superset of ARMv7, and all the ARMv8 features are
discoverable with a set of ID registers. It means that we can
use CPU_V7 to guard ARMv8 features at compile time.
This commit simply amends the CPU_V7 configuration symbol comment
to reflect that CPU_V7 also covers ARMv8.
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Zaid Al-Bassam <[email protected]>
Tested-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Change the function arm_iommu_create_mapping() to take a pointer to a
const bus_type as the function does not modify the variable the pointer
points to at all, and the driver core bus functions it calls all expect
a const * type.
Cc: Russell King <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "Russell King (Oracle)" <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Lukas Bulwahn <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Linus Walleij <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
|
|
Pull ARM udpates from Russell King:
- Improve Kconfig help text for Cortex A8 and Cortex A9 errata
- Kconfig spelling and grammar fixes
- Allow kernel-mode VFP/Neon in softirq context
- Use Neon in softirq context
- Implement AES-CTR/GHASH version of GCM
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer
ARM: 9288/1: Kconfigs: fix spelling & grammar
ARM: 9286/1: crypto: Implement fused AES-CTR/GHASH version of GCM
ARM: 9285/1: remove meaningless arch/arm/mach-rda/Makefile
ARM: 9283/1: permit non-nested kernel mode NEON in softirq context
ARM: 9282/1: vfp: Manipulate task VFP state with softirqs disabled
ARM: 9281/1: improve Cortex A8/A9 errata help text
|
|
'x86/vt-d', 'x86/amd' and 'core' into next
|
|
Fix spelling (reported by codespell) and grammar in Arm Kconfig files.
Signed-off-by: Randy Dunlap <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
The internal mechanisms support this, but instead of exposting the gfp to
the caller it wrappers it into iommu_map() and iommu_map_atomic()
Fix this instead of adding more variants for GFP_KERNEL_ACCOUNT.
Reviewed-by: Kevin Tian <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Since commit 80b6093b55e3 ("kbuild: add -Wundef to KBUILD_CPPFLAGS
for W=1 builds"), building with W=1 detects -Wundef warnings for
assembly code.
$ make W=1 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- arch/arm/mm/
[snip]
AS arch/arm/mm/cache-v7.o
In file included from arch/arm/mm/cache-v7.S:17:
arch/arm/mm/proc-macros.S:109:5: warning: "L_PTE_SHARED" is not defined, evaluates to 0 [-Wundef]
109 | #if L_PTE_SHARED != PTE_EXT_SHARED
| ^~~~~~~~~~~~
arch/arm/mm/proc-macros.S:109:21: warning: "PTE_EXT_SHARED" is not defined, evaluates to 0 [-Wundef]
109 | #if L_PTE_SHARED != PTE_EXT_SHARED
| ^~~~~~~~~~~~~~
arch/arm/mm/proc-macros.S:113:10: warning: "L_PTE_XN" is not defined, evaluates to 0 [-Wundef]
113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
| ^~~~~~~~
arch/arm/mm/proc-macros.S:113:19: warning: "L_PTE_USER" is not defined, evaluates to 0 [-Wundef]
113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
| ^~~~~~~~~~
arch/arm/mm/proc-macros.S:113:30: warning: "L_PTE_RDONLY" is not defined, evaluates to 0 [-Wundef]
113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
| ^~~~~~~~~~~~
arch/arm/mm/proc-macros.S:113:43: warning: "L_PTE_DIRTY" is not defined, evaluates to 0 [-Wundef]
113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
| ^~~~~~~~~~~
arch/arm/mm/proc-macros.S:113:55: warning: "L_PTE_YOUNG" is not defined, evaluates to 0 [-Wundef]
113 | (L_PTE_XN+L_PTE_USER+L_PTE_RDONLY+L_PTE_DIRTY+L_PTE_YOUNG+\
| ^~~~~~~~~~~
arch/arm/mm/proc-macros.S:114:10: warning: "L_PTE_PRESENT" is not defined, evaluates to 0 [-Wundef]
114 | L_PTE_PRESENT) > L_PTE_SHARED
| ^~~~~~~~~~~~~
arch/arm/mm/proc-macros.S:114:27: warning: "L_PTE_SHARED" is not defined, evaluates to 0 [-Wundef]
114 | L_PTE_PRESENT) > L_PTE_SHARED
| ^~~~~~~~~~~~
Include <asm/pgtable.h> from proc-macros.S to fix the warnings.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
zero_page is a void* pointer but memblock_alloc() returns phys_addr_t type
so this generates a warning while using clang and with -Wint-error enabled
that becomes and error. So let's cast the return of memblock_alloc() to
(void *).
Cc: <[email protected]> # 4.14.x +
Fixes: 340a982825f7 ("ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation")
Signed-off-by: Giulio Benetti <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Pull ARM updates from Russell King:
- update unwinder to cope with module PLTs
- enable UBSAN on ARM
- improve kernel fault message
- update UEFI runtime page tables dump
- avoid clang's __aeabi_uldivmod generated in NWFPE code
- disable FIQs on CPU shutdown paths
- update XOR register usage
- a number of build updates (using .arch, thread pointer, removal of
lazy evaluation in Makefile)
- conversion of stacktrace code to stackwalk
- findbit assembly updates
- hwcap feature updates for ARMv8 CPUs
- instruction dump updates for big-endian platforms
- support for function error injection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
ARM: 9279/1: support function error injection
ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones
ARM: 9276/1: Refactor dump_instr()
ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA
ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe
ARM: 9273/1: Add hwcap for Speculation Barrier(SB)
ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM
ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16
ARM: 9270/1: vfp: Add hwcap for FEAT_FHM
ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd
ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16
ARM: 9267/1: Define Armv8 registers in AArch32 state
ARM: findbit: add unwinder information
ARM: findbit: operate by words
ARM: findbit: convert to macros
ARM: findbit: provide more efficient ARMv7 implementation
ARM: findbit: document ARMv5 bit offset calculation
ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK
ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code
ARM: 9265/1: pass -march= only to compiler
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- reduce the swiotlb buffer size on allocation failure (Alexey
Kardashevskiy)
- clean up passing of bogus GFP flags to the dma-coherent allocator
(Christoph Hellwig)
* tag 'dma-mapping-6.2-2022-12-13' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reject __GFP_COMP in dma_alloc_attrs
ALSA: memalloc: don't pass bogus GFP_ flags to dma_alloc_*
s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent
cnic: don't pass bogus GFP_ flags to dma_alloc_coherent
RDMA/qib: don't pass bogus GFP_ flags to dma_alloc_coherent
RDMA/hfi1: don't pass bogus GFP_ flags to dma_alloc_coherent
media: videobuf-dma-contig: use dma_mmap_coherent
swiotlb: reduce the swiotlb buffer size on allocation failure
|
|
Pull ARM fix from Russell King:
"One further ARM fix for 6.1 from Wang Kefeng, fixing up the handling
for kfence faults"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9278/1: kfence: only handle translation faults
|
|
This is a similar fixup like arm64 does, only handle translation faults
in case of unexpected kfence report when alignment faults on ARM, see
more from commit 0bb1fbffc631 ("arm64: mm: kfence: only handle translation
faults").
Fixes: 75969686ec0d ("ARM: 9166/1: Support KFENCE for ARM")
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Pull ARM fixes from Russell King:
"Two fixes for 6.1:
- fix stacktraces for tracepoint events in Thumb2 mode
- fix for noMMU ZERO_PAGE() implementation"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation
ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels
|
|
DMA allocations can never be turned back into a page pointer, so
requesting compound pages doesn't make sense and it can't even be
supported at all by various backends.
Reject __GFP_COMP with a warning in dma_alloc_attrs, and stop clearing
the flag in the arm dma ops and dma-iommu.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-by: Marek Szyprowski <[email protected]>
|
|
Similar to commit a6c30873ee4a ("ARM: 8989/1: use .fpu assembler
directives instead of assembler arguments").
GCC and GNU binutils support setting the "sub arch" via -march=,
-Wa,-march, target function attribute, and .arch assembler directive.
Clang was missing support for -Wa,-march=, but this was implemented in
clang-13.
The behavior of both GCC and Clang is to
prefer -Wa,-march= over -march= for assembler and assembler-with-cpp
sources, but Clang will warn about the -march= being unused.
clang: warning: argument unused during compilation: '-march=armv6k'
[-Wunused-command-line-argument]
Since most assembler is non-conditionally assembled with one sub arch
(modulo arch/arm/delay-loop.S which conditionally is assembled as armv4
based on CONFIG_ARCH_RPC, and arch/arm/mach-at91/pm-suspend.S which is
conditionally assembled as armv7-a based on CONFIG_CPU_V7), prefer the
.arch assembler directive.
Add a few more instances found in compile testing as found by Arnd and
Nathan.
Link: https://github.com/llvm/llvm-project/commit/1d51c699b9e2ebc5bcfdbe85c74cc871426333d4
Link: https://bugs.llvm.org/show_bug.cgi?id=48894
Link: https://github.com/ClangBuiltLinux/linux/issues/1195
Link: https://github.com/ClangBuiltLinux/linux/issues/1315
Suggested-by: Arnd Bergmann <[email protected]>
Suggested-by: Nathan Chancellor <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Tested-by: Nathan Chancellor <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
If there is a kernel fault, see do_kernel_fault(), we only print
the generic "paging request" or "NULL pointer dereference" message
which don't show read, write or excute information, let's provide
better fault message for them.
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Actually in no-MMU SoCs(i.e. i.MXRT) ZERO_PAGE(vaddr) expands to
```
virt_to_page(0)
```
that in order expands to:
```
pfn_to_page(virt_to_pfn(0))
```
and then virt_to_pfn(0) to:
```
((((unsigned long)(0) - PAGE_OFFSET) >> PAGE_SHIFT) +
PHYS_PFN_OFFSET)
```
where PAGE_OFFSET and PHYS_PFN_OFFSET are the DRAM offset(0x80000000) and
PAGE_SHIFT is 12. This way we obtain 16MB(0x01000000) summed to the base of
DRAM(0x80000000).
When ZERO_PAGE(0) is then used, for example in bio_add_page(), the page
gets an address that is out of DRAM bounds.
So instead of using fake virtual page 0 let's allocate a dedicated
zero_page during paging_init() and assign it to a global 'struct page *
empty_zero_page' the same way mmu.c does and it's the same approach used
in m68k with commit dc068f462179 as discussed here[0]. Then let's move
ZERO_PAGE() definition to the top of pgtable.h to be in common between
mmu.c and nommu.c.
[0]: https://lore.kernel.org/linux-m68k/[email protected]/T/#m1266ceb63
ad140743174d6b3070364d3c9a5179b
Signed-off-by: Giulio Benetti <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a regression in the ARM dma-direct conversion (Christoph Hellwig)
- use memcpy_{from,to}_page (Fabio M. De Francesco)
- cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn)
- make SG table pool allocation less fragile (Masahiro Yamada)
- don't panic on swiotlb initialization failure (Robin Murphy)
* tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping:
ARM/dma-mapping: remove the dma_coherent member of struct dev_archdata
ARM/dma-mappіng: don't override ->dma_coherent when set from a bus notifier
lib/sg_pool: change module_init(sg_pool_init) to subsys_initcall
MAINTAINERS: merge SWIOTLB SUBSYSTEM into DMA MAPPING HELPERS
swiotlb: don't panic!
swiotlb: replace kmap_atomic() with memcpy_{from,to}_page()
|
|
Pull ARM updates from Russell King:
- Print an un-hashed userspace PC on undefined instruction exception
- Disable FDPIC ABI
- Remove redundant vfp_flush/release_thread functions
- Use raw_cpu_* rather than this_cpu_* in handle_bad_stack()
- Avoid needlessly long backtraces when show_regs() is called
- Fix an issue with stack traces through call_with_stack()
- Avoid stack traces saving a duplicate exception PC value
- Pass a void pointer to virt_to_page() in DMA mapping code
- Fix kasan maps for modules when CONFIG_KASAN_VMALLOC=n
- Show FDT region and page table level names in kernel page tables dump
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9246/1: dump: show page table level name
ARM: 9245/1: dump: show FDT region
ARM: 9242/1: kasan: Only map modules if CONFIG_KASAN_VMALLOC=n
ARM: 9240/1: dma-mapping: Pass (void *) to virt_to_page()
ARM: 9234/1: stacktrace: Avoid duplicate saving of exception PC value
ARM: 9233/1: stacktrace: Skip frame pointer boundary check for call_with_stack()
ARM: 9224/1: Dump the stack traces based on the parameter 'regs' of show_regs()
ARM: 9232/1: Replace this_cpu_* with raw_cpu_* in handle_bad_stack()
ARM: 9228/1: vfp: kill vfp_flush/release_thread()
ARM: 9226/1: disable FDPIC ABI
ARM: 9221/1: traps: print un-hashed user pc on undefined instruction
|
|
Since commit ae626eb97376 ("ARM/dma-mapping: use dma-direct
unconditionally") only the dma_coherent flag in struct device is used,
so remove the now write only flag in struct dev_archdata.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
|
|
Commit ae626eb97376 ("ARM/dma-mapping: use dma-direct unconditionally")
caused a regression on the mvebu platform, wherein devices that are
dma-coherent are marked as dma-noncoherent, because although
mvebu_hwcc_notifier() after that commit still marks then as coherent,
the arm_coherent_dma_ops() function, which is called later, overwrites
this setting, since it is being called from drivers/of/device.c with
coherency parameter determined by of_dma_is_coherent(), and the
device-trees do not declare the 'dma-coherent' property.
Fix this by defaulting never clearing the dma_coherent flag in
arm_coherent_dma_ops().
Fixes: ae626eb97376 ("ARM/dma-mapping: use dma-direct unconditionally")
Reported-by: Marek Behún <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Tested-by: Marek Behún <[email protected]>
|
|
ARM could have 3 page table level if ARM_LPAE enabled, or only 2 page
table level, let's show the page table level name when dump.
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Since commit 7a1be318f579 ("ARM: 9012/1: move device tree mapping out
of linear region"), FDT is placed between the end of the vmalloc region
and the start of the fixmap region, let's show it in dump.
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|