aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mm
AgeCommit message (Collapse)AuthorFilesLines
2017-04-09ARM: Update cpu_v7_reset documentationMarc Zyngier1-1/+2
cpu_v7_reset() now takes a second parameter indicating whether we should reboot in HYP or not. Update the documentation to reflect this. Tested-by: Keerthy <[email protected]> Acked-by: Russell King <[email protected]> Acked-by: Catalin Marinas <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Christoffer Dall <[email protected]>
2017-04-09ARM: soft-reboot into same mode that we entered the kernelRussell King1-4/+8
When we soft-reboot (eg, kexec) from one kernel into the next, we need to ensure that we enter the new kernel in the same processor mode as when we were entered, so that (eg) the new kernel can install its own hypervisor - the old kernel's hypervisor will have been overwritten. In order to do this, we need to pass a flag to cpu_reset() so it knows what to do, and we need to modify the kernel's own hypervisor stub to allow it to handle a soft-reboot. As we are always guaranteed to install our own hypervisor if we're entered in HYP32 mode, and KVM will have moved itself out of the way on kexec/normal reboot, we can assume that our hypervisor is in place when we want to kexec, so changing our hypervisor API should not be a problem. Tested-by: Keerthy <[email protected]> Acked-by: Catalin Marinas <[email protected]> Signed-off-by: Russell King <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Christoffer Dall <[email protected]>
2017-03-29ARM: 8666/1: mm: dump: Add domain to outputKees Cook1-10/+44
This adds the memory domain (on non-LPAE) to the PMD and PTE dumps. This isn't in the regular PMD bits because I couldn't find a clean way to fall back to retain some of the PMD bits when reporting PTE. So this is special-cased currently. New output example: ---[ Modules ]--- 0x7f000000-0x7f001000 4K KERNEL ro x SHD MEM/CACHED/WBWA 0x7f001000-0x7f002000 4K KERNEL ro NX SHD MEM/CACHED/WBWA 0x7f002000-0x7f004000 8K KERNEL RW NX SHD MEM/CACHED/WBWA ---[ Kernel Mapping ]--- 0x80000000-0x80100000 1M KERNEL RW NX SHD 0x80100000-0x80800000 7M KERNEL ro x SHD 0x80800000-0x80b00000 3M KERNEL ro NX SHD 0x80b00000-0xa0000000 501M KERNEL RW NX SHD ... ---[ Vectors ]--- 0xffff0000-0xffff1000 4K VECTORS USR ro x SHD MEM/CACHED/WBWA 0xffff1000-0xffff2000 4K VECTORS ro x SHD MEM/CACHED/WBWA Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-03-29ARM: 8665/1: nommu: access ID_PFR1 only if CPUID schemeafzal mohammed1-1/+4
Greg upon trying to boot no-MMU Kernel on ARM926EJ reported boot failure. He root caused it to ID_PFR1 access introduced by the commit mentioned in the fixes tag below. All CP15 processors need not have processor feature registers, only for architectures defined by CPUID scheme would have it. Hence check for it before accessing processor feature register, ID_PFR1. Fixes: f8300a0b5de0 ("ARM: 8647/2: nommu: dynamic exception base address setting") Reported-by: Greg Ungerer <[email protected]> Signed-off-by: afzal mohammed <[email protected]> Tested-by: Greg Ungerer <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-03-29ARM: dma-mapping: disallow dma_get_sgtable() for non-kernel managed memoryRussell King1-1/+19
dma_get_sgtable() tries to create a scatterlist table containing valid struct page pointers for the coherent memory allocation passed in to it. However, memory can be declared via dma_declare_coherent_memory(), or via other reservation schemes which means that coherent memory is not guaranteed to be backed by struct pages. In such cases, the resulting scatterlist table contains pointers to invalid pages, which causes kernel oops later. This patch adds detection of such memory, and refuses to create a scatterlist table for such memory. Reported-by: Shuah Khan <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-03-17ARM: 8659/1: l2c: allow CA9 optimizations to be disabledChris Brandt1-2/+11
If a PL310 is added to a system, but the sideband signals are not connected, some Cortex A9 optimizations cannot be used. In particular, enabling Full Line of Zeros in the CA9 without sidebands connected will crash the system since the CA9 will expect the L2C to perform operations, yet the L2C never gets the commands. Early BRESP also does not work without sideband signals. Signed-off-by: Chris Brandt <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-03-02sched/headers: Prepare to remove the <linux/mm_types.h> dependency from ↵Ingo Molnar1-0/+1
<linux/sched.h> Update code that relied on sched.h including various MM types for them. This will allow us to remove the <linux/mm_types.h> include from <linux/sched.h>. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-0/+2
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving more code ↵Ingo Molnar1-0/+1
to <linux/sched/mm.h> We are going to split more MM APIs out of <linux/sched.h>, which will have to be picked up from a couple of .c files. The APIs that we are going to move are: arch_pick_mmap_layout() arch_get_unmapped_area() arch_get_unmapped_area_topdown() mm_update_next_owner() Include the header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar4-3/+4
<linux/sched/signal.h> We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/signal.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-02-28Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds10-97/+228
Pull ARM updates from Russell King: - nommu updates from Afzal Mohammed cleaning up the vectors support - allow DMA memory "mapping" for nommu Benjamin Gaignard - fixing a correctness issue with R_ARM_PREL31 relocations in the module linker - add strlen() prototype for the decompressor - support for DEBUG_VIRTUAL from Florian Fainelli - adjusting memory bounds after memory reservations have been registered - unipher cache handling updates from Masahiro Yamada - initrd and Thumb Kconfig cleanups * 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits) ARM: mm: round the initrd reservation to page boundaries ARM: mm: clean up initrd initialisation ARM: mm: move initrd init code out of arm_memblock_init() ARM: 8655/1: improve NOMMU definition of pgprot_*() ARM: 8654/1: decompressor: add strlen prototype ARM: 8652/1: cache-uniphier: clean up active way setup code ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h> ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly ARM: 8649/2: nommu: remove Hivecs configuration is asm ARM: 8648/2: nommu: display vectors base ARM: 8647/2: nommu: dynamic exception base address setting ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig ARM: 8644/1: Reduce "CPU: shutdown" message to debug level ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL ARM: 8639/1: Define KERNEL_START and KERNEL_END ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_ ARM: 8637/1: Adjust memory boundaries after reservations ARM: 8636/1: Cleanup sanity_check_meminfo ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support ...
2017-02-28Merge branches 'fixes' and 'misc'; commit 'kuser^{/add CPU_THUMB_CAPABLE to ↵Russell King10-97/+228
indicate}' into for-linus
2017-02-28ARM: mm: round the initrd reservation to page boundariesRussell King1-5/+18
Round the initrd memblock reservation to page boundaries to prevent other data sharing the initrd pages. This prevents an allocation possibly overlapping with the initrd, which would later get trampled on in free_initrd_mem(). Signed-off-by: Russell King <[email protected]>
2017-02-28ARM: mm: clean up initrd initialisationRussell King1-12/+15
Rather than repeatedly testing phys_initrd_size to see if the initrd is still enabled, return from the new function to avoid executing the remaining initialisation. Signed-off-by: Russell King <[email protected]>
2017-02-28ARM: mm: move initrd init code out of arm_memblock_init()Russell King1-4/+9
Move the ARM initrd initialisation code out of arm_memblock_init() into its own function, so it can be cleaned up. Signed-off-by: Russell King <[email protected]>
2017-02-28ARM: 8652/1: cache-uniphier: clean up active way setup codeMasahiro Yamada1-14/+9
Now, the active way setup function is called with a fixed value zero for the second argument. The code can be simpler. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-02-28ARM: 8647/2: nommu: dynamic exception base address settingAfzal Mohammed1-2/+50
No-MMU dynamic exception base address configuration on CP15 processors. In the case of low vectors, decision based on whether security extensions are enabled & whether remap vectors to RAM CONFIG option is selected. For no-MMU without CP15, current default value of 0x0 is retained. Signed-off-by: afzal mohammed <[email protected]> Tested-by: Vladimir Murzin <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-02-28ARM: 8646/1: mmu: decouple VECTORS_BASE from KconfigAfzal Mohammed2-4/+5
For MMU configurations, VECTORS_BASE is always 0xffff0000, a macro definition will suffice. For no-MMU, exception base address is dynamically determined in subsequent patches. To preserve bisectability, now make the macro applicable for no-MMU scenario too. Thanks to 0-DAY kernel test infrastructure that found the bisectability issue. This macro will be restricted to MMU case upon dynamically determining exception base address for no-MMU. Once exception address is handled dynamically for no-MMU, VECTORS_BASE can be removed from Kconfig. Signed-off-by: afzal mohammed <[email protected]> Tested-by: Vladimir Murzin <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-02-28ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUALFlorian Fainelli2-0/+58
x86 has an option: CONFIG_DEBUG_VIRTUAL to do additional checks on virt_to_phys calls. The goal is to catch users who are calling virt_to_phys on non-linear addresses immediately. This includes caller using __virt_to_phys() on image addresses instead of __pa_symbol(). This is a generally useful debug feature to spot bad code (particulary in drivers). Acked-by: Russell King <[email protected]> Acked-by: Laura Abbott <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-02-28ARM: 8639/1: Define KERNEL_START and KERNEL_ENDFlorian Fainelli2-10/+3
In preparation for adding CONFIG_DEBUG_VIRTUAL support, define a set of common constants: KERNEL_START and KERNEL_END which abstract CONFIG_XIP_KERNEL vs. !CONFIG_XIP_KERNEL. Update the code where relevant. Acked-by: Russell King <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-02-28ARM: 8637/1: Adjust memory boundaries after reservationsLaura Abbott1-3/+6
adjust_lowmem_bounds is responsible for setting up the boundary for lowmem/highmem. This needs to be setup before memblock reservations can occur. At the time memblock reservations can occur, memory can also be removed from the system. The lowmem/highmem boundary and end of memory may be affected by this but it is currently not recalculated. On some systems this may be harmless, on others this may result in incorrect ranges being passed to the main memory allocator. Correct this by recalculating the lowmem/highmem boundary after all reservations have been made. Tested-by: Magnus Lilja <[email protected]> Signed-off-by: Laura Abbott <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-02-28ARM: 8636/1: Cleanup sanity_check_meminfoLaura Abbott2-46/+28
The logic for sanity_check_meminfo has become difficult to follow. Clean up the code so it's more obvious what the code is actually trying to do. Additionally, meminfo is now removed so rename the function to better describe its purpose. Tested-by: Magnus Lilja <[email protected]> Reviewed-by: Nicolas Pitre <[email protected]> Signed-off-by: Laura Abbott <[email protected]> Signed-off-by: Laura Abbott <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-02-27scripts/spelling.txt: add "swith" pattern and fix typo instancesMasahiro Yamada2-2/+2
Fix typos and add the following to the scripts/spelling.txt: swith||switch swithable||switchable swithed||switched swithing||switching While we are here, fix the "update" to "updates" in the touched hunk in drivers/net/wireless/marvell/mwifiex/wmm.c. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-25Merge tag 'for-next-dma_ops' of ↵Linus Torvalds1-11/+11
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-02-24mm: wire up GFP flag passing in dma_alloc_from_contiguousLucas Stach1-7/+9
The callers of the DMA alloc functions already provide the proper context GFP flags. Make sure to pass them through to the CMA allocator, to make the CMA compaction context aware. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Lucas Stach <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Radim Krcmar <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Alexander Graf <[email protected]> Cc: Joonsoo Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-02-21Merge tag 'rodata-v4.11-rc1' of ↵Linus Torvalds2-15/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull rodata updates from Kees Cook: "This renames the (now inaccurate) DEBUG_RODATA and related SET_MODULE_RONX configs to the more sensible STRICT_KERNEL_RWX and STRICT_MODULE_RWX" * tag 'rodata-v4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONX arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be common
2017-02-21Merge tag 'extable-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux Pull exception table module split from Paul Gortmaker: "Final extable.h related changes. This completes the separation of exception table content from the module.h header file. This is achieved with the final commit that removes the one line back compatible change that sourced extable.h into the module.h file. The commits are unchanged since January, with the exception of a couple Acks that came in for the last two commits a bit later. The changes have been in linux-next for quite some time[1] and have got widespread arch coverage via toolchains I have and also from additional ones the kbuild bot has. Maintaners of the various arch were Cc'd during the postings to lkml[2] and informed that the intention was to take the remaining arch specific changes and lump them together with the final two non-arch specific changes and submit for this merge window. The ia64 diffstat stands out and probably warrants a mention. In an earlier review, Al Viro made a valid comment that the original header separation of content left something to be desired, and that it get fixed as a part of this change, hence the larger diffstat" * tag 'extable-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (21 commits) module.h: remove extable.h include now users have migrated core: migrate exception table users off module.h and onto extable.h cris: migrate exception table users off module.h and onto extable.h hexagon: migrate exception table users off module.h and onto extable.h microblaze: migrate exception table users off module.h and onto extable.h unicore32: migrate exception table users off module.h and onto extable.h score: migrate exception table users off module.h and onto extable.h metag: migrate exception table users off module.h and onto extable.h arc: migrate exception table users off module.h and onto extable.h nios2: migrate exception table users off module.h and onto extable.h sparc: migrate exception table users onto extable.h openrisc: migrate exception table users off module.h and onto extable.h frv: migrate exception table users off module.h and onto extable.h sh: migrate exception table users off module.h and onto extable.h xtensa: migrate exception table users off module.h and onto extable.h mn10300: migrate exception table users off module.h and onto extable.h alpha: migrate exception table users off module.h and onto extable.h arm: migrate exception table users off module.h and onto extable.h m32r: migrate exception table users off module.h and onto extable.h ia64: ensure exception table search users include extable.h ...
2017-02-20Merge tag 'iommu-updates-v4.11' of ↵Linus Torvalds1-30/+30
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU UPDATES from Joerg Roedel: - KVM PCIe/MSI passthrough support on ARM/ARM64 - introduction of a core representation for individual hardware iommus - support for IOMMU privileged mappings as supported by some ARM IOMMUS - 16-bit SID support for ARM-SMMUv2 - stream table optimization for ARM-SMMUv3 - various fixes and other small improvements * tag 'iommu-updates-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (61 commits) vfio/type1: Fix error return code in vfio_iommu_type1_attach_group() iommu: Remove iommu_register_instance interface iommu/exynos: Make use of iommu_device_register interface iommu/mediatek: Make use of iommu_device_register interface iommu/msm: Make use of iommu_device_register interface iommu/arm-smmu: Make use of the iommu_register interface iommu: Add iommu_device_set_fwnode() interface iommu: Make iommu_device_link/unlink take a struct iommu_device iommu: Add sysfs bindings for struct iommu_device iommu: Introduce new 'struct iommu_device' iommu: Rename struct iommu_device iommu: Rename iommu_get_instance() iommu: Fix static checker warning in iommu_insert_device_resv_regions iommu: Avoid unnecessary assignment of dev->iommu_fwspec iommu/mediatek: Remove bogus 'select' statements iommu/dma: Remove bogus dma_supported() implementation iommu/ipmmu-vmsa: Restrict IOMMU Domain Geometry to 32-bit address space iommu/vt-d: Don't over-free page table directories iommu/vt-d: Tylersburg isoch identity map check is done too late. iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu ...
2017-02-12ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb supportRussell King1-5/+26
Clean up arch/arm/mm/Kconfig a little to provide a symbol which indicates whether the CPU may support the Thumb instruction set. This gets rid of the growing dependencies on ARM_THUMB, and also gives us a useful Kconfig symbol for choosing the kuser code. Reviewed-by: Nicolas Pitre <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-02-07arch: Rename CONFIG_DEBUG_RODATA and CONFIG_DEBUG_MODULE_RONXLaura Abbott2-3/+3
Both of these options are poorly named. The features they provide are necessary for system security and should not be considered debug only. Change the names to CONFIG_STRICT_KERNEL_RWX and CONFIG_STRICT_MODULE_RWX to better describe what these options do. Signed-off-by: Laura Abbott <[email protected]> Acked-by: Jessica Yu <[email protected]> Signed-off-by: Kees Cook <[email protected]>
2017-02-07arch: Move CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX to be commonLaura Abbott1-12/+0
There are multiple architectures that support CONFIG_DEBUG_RODATA and CONFIG_SET_MODULE_RONX. These options also now have the ability to be turned off at runtime. Move these to an architecture independent location and make these options def_bool y for almost all of those arches. Signed-off-by: Laura Abbott <[email protected]> Acked-by: Ingo Molnar <[email protected]> Acked-by: Heiko Carstens <[email protected]> Signed-off-by: Kees Cook <[email protected]>
2017-01-30ARM: 8642/1: LPAE: catch pending imprecise abort on unmaskAlexander Sverdlin2-2/+6
Asynchronous external abort is coded differently in DFSR with LPAE enabled. Fixes: 9254970c "ARM: 8447/1: catch pending imprecise abort on unmask". Signed-off-by: Alexander Sverdlin <[email protected]> Cc: Russell King <[email protected]> Cc: Andrew Morton <[email protected]> Cc: [email protected] Signed-off-by: Russell King <[email protected]>
2017-01-24arm: migrate exception table users off module.h and onto extable.hPaul Gortmaker2-2/+2
These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. Cc: Russell King <[email protected]> Cc: [email protected] Signed-off-by: Paul Gortmaker <[email protected]>
2017-01-24treewide: Constify most dma_map_ops structuresBart Van Assche1-11/+11
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. This patch has been generated as follows: git grep -l 'struct dma_map_ops' | xargs -d\\n sed -i \ -e 's/struct dma_map_ops/const struct dma_map_ops/g' \ -e 's/const struct dma_map_ops {/struct dma_map_ops {/g' \ -e 's/^const struct dma_map_ops;$/struct dma_map_ops;/' \ -e 's/const const struct dma_map_ops /const struct dma_map_ops /g'; sed -i -e 's/const \(struct dma_map_ops intel_dma_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops intel_dma_ops'); sed -i -e 's/const \(struct dma_map_ops dma_iommu_ops\)/\1/' \ $(git grep -l 'struct dma_map_ops' | grep ^arch/powerpc); sed -i -e '/^struct vmd_dev {$/,/^};$/ s/const \(struct dma_map_ops[[:blank:]]dma_ops;\)/\1/' \ -e '/^static void vmd_setup_dma_ops/,/^}$/ s/const \(struct dma_map_ops \*dest\)/\1/' \ -e 's/const \(struct dma_map_ops \*dest = \&vmd->dma_ops\)/\1/' \ drivers/pci/host/*.c sed -i -e '/^void __init pci_iommu_alloc(void)$/,/^}$/ s/dma_ops->/intel_dma_ops./' arch/ia64/kernel/pci-dma.c sed -i -e 's/static const struct dma_map_ops sn_dma_ops/static struct dma_map_ops sn_dma_ops/' arch/ia64/sn/pci/pci_dma.c sed -i -e 's/(const struct dma_map_ops \*)//' drivers/misc/mic/bus/vop_bus.c Signed-off-by: Bart Van Assche <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Juergen Gross <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: [email protected] Cc: [email protected] Cc: Russell King <[email protected]> Cc: [email protected] Signed-off-by: Doug Ledford <[email protected]>
2017-01-19arm/dma-mapping: Implement DMA_ATTR_PRIVILEGEDSricharan R1-30/+30
The newly added DMA_ATTR_PRIVILEGED is useful for creating mappings that are only accessible to privileged DMA engines. Adding it to the arm dma-mapping.c so that the ARM32 DMA IOMMU mapper can make use of it. Signed-off-by: Sricharan R <[email protected]> Reviewed-by: Will Deacon <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2017-01-10ARM: 8633/1: nommu: allow mmap when !CONFIG_MMUBenjamin Gaignard1-0/+3
commit ab6494f0c96f ("nommu: Add noMMU support to the DMA API") have add CONFIG_MMU compilation flag but that prohibit to use dma_mmap_wc() when the platform doesn't have MMU. This patch call vm_iomap_memory() in noMMU case to test if addresses are correct and set vma->vm_flags rather than all return an error. Signed-off-by: Benjamin Gaignard <[email protected]> Signed-off-by: Russell King <[email protected]>
2017-01-10ARM: 8627/1: avoid cache flushing in flush_dcache_page()Rabin Vincent1-0/+6
When the data cache is PIPT or VIPT non-aliasing, and cache operations are broadcast by the hardware, we can always postpone the flush in flush_dcache_page(). A similar change was done for ARM64 in commit b5b6c9e9149d ("arm64: Avoid cache flushing in flush_dcache_page()"). Reviewed-by: Catalin Marinas <[email protected]> Signed-off-by: Rabin Vincent <[email protected]> Signed-off-by: Russell King <[email protected]>
2016-12-25cpu/hotplug: Cleanup state namesThomas Gleixner2-2/+2
When the state names got added a script was used to add the extra argument to the calls. The script basically converted the state constant to a string, but the cleanup to convert these strings into meaningful ones did not happen. Replace all the useless strings with 'subsys/xxx/yyy:state' strings which are used in all the other places already. Signed-off-by: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sebastian Siewior <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2016-12-14Merge branches 'clkdev', 'fixes', 'misc' and 'sa1100-base' into for-linusRussell King5-26/+47
2016-11-29ARM: mm: allow set_memory_*() to be used on the vmalloc regionRussell King1-1/+2
We can allow modules to be loaded into the vmalloc region, where they should also benefit from the same protections as those loaded into the more efficient module region. Allow these functions to operate there as well. Signed-off-by: Russell King <[email protected]>
2016-11-29ARM: mm: fix set_memory_*() bounds checksRussell King1-13/+13
The set_memory_*() bounds checks are buggy on several fronts: 1. They fail to round the region size up if the passed address is not page aligned. 2. The region check was incomplete, and didn't correspond with what was being asked of apply_to_page_range() So, rework change_memory_common() to fix these problems, adding an "in_region()" helper to determine whether the start & size fit within the provided region start and stop addresses. Signed-off-by: Russell King <[email protected]>
2016-11-15ARM: 8623/1: mm: add ARM_L1_CACHE_SHIFT_7 for UniPhier outer cacheMasahiro Yamada1-1/+7
The UniPhier outer cache (arch/arm/mm/cache-uniphier.c) has 128 byte line length and its tags are also managed per 128 byte line. This is very unfortunate, but the current 64 byte alignment for kmalloc() causes sharing problems on DMA if used with this outer cache. This commit adds ARM_L1_CACHE_SHIFT_7 to increase the DMA minimum alignment to 128 byte if CACHE_UNIPHIER is enabled. There are several drivers that assume aligning to L1_CACHE_BYTES will be DMA safe, so this commit also changes the L1_CACHE_BYTES for safety. Having said that, I hesitate to align all the other SoCs in Multi platform to the UniPhier's requirement. So, I am disabling the CONFIG_CACHE_UNIPHIER by default, so that multi_v7_defconfig will still stay with CONFIG_ARM_L1_CACHE_SHIFT=6. With this commit, UniPhier SoCs will become slower, but it is much better than system crash. If desired, the outer-cache can be enabled by merge_config or something. Note: The UniPhier PH1-Pro5 SoC is equipped also with L3 cache with 256 byte line size but its tags are managed per 128 byte sub-line. So, ARM_L1_CACHE_SHIFT_7 should be fine for all the UniPhier SoCs. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Russell King <[email protected]>
2016-11-15ARM: 8628/1: dma-mapping: preallocate DMA-debug hash tables in core_initcallMarek Szyprowski1-1/+1
fs_initcall is definitely too late to initialize DMA-debug hash tables, because some drivers might get probed and use DMA mapping framework already in core_initcall. Late initialization of DMA-debug results in false warning about accessing memory, that was not allocated, like this one: ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1 at lib/dma-debug.c:1104 check_unmap+0xa1c/0xe50 exynos-sysmmu 10a60000.sysmmu: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000006ebd0000] [size=16384 bytes] Modules linked in: CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc5-00028-g39dde3d-dirty #44 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c0119dd4>] (unwind_backtrace) from [<c01122bc>] (show_stack+0x20/0x24) [<c01122bc>] (show_stack) from [<c062714c>] (dump_stack+0x84/0xa0) [<c062714c>] (dump_stack) from [<c0132560>] (__warn+0x14c/0x180) [<c0132560>] (__warn) from [<c01325dc>] (warn_slowpath_fmt+0x48/0x50) [<c01325dc>] (warn_slowpath_fmt) from [<c06814f8>] (check_unmap+0xa1c/0xe50) [<c06814f8>] (check_unmap) from [<c06819c4>] (debug_dma_unmap_page+0x98/0xc8) [<c06819c4>] (debug_dma_unmap_page) from [<c076c3e8>] (exynos_iommu_domain_free+0x158/0x380) [<c076c3e8>] (exynos_iommu_domain_free) from [<c0764a30>] (iommu_domain_free+0x34/0x60) [<c0764a30>] (iommu_domain_free) from [<c011f168>] (release_iommu_mapping+0x30/0xb8) [<c011f168>] (release_iommu_mapping) from [<c011f23c>] (arm_iommu_release_mapping+0x4c/0x50) [<c011f23c>] (arm_iommu_release_mapping) from [<c0b061ac>] (s5p_mfc_probe+0x640/0x80c) [<c0b061ac>] (s5p_mfc_probe) from [<c07e6750>] (platform_drv_probe+0x70/0x148) [<c07e6750>] (platform_drv_probe) from [<c07e25c0>] (driver_probe_device+0x12c/0x6b0) [<c07e25c0>] (driver_probe_device) from [<c07e2c6c>] (__driver_attach+0x128/0x17c) [<c07e2c6c>] (__driver_attach) from [<c07df74c>] (bus_for_each_dev+0x88/0xc8) [<c07df74c>] (bus_for_each_dev) from [<c07e1b6c>] (driver_attach+0x34/0x58) [<c07e1b6c>] (driver_attach) from [<c07e1350>] (bus_add_driver+0x18c/0x32c) [<c07e1350>] (bus_add_driver) from [<c07e4198>] (driver_register+0x98/0x148) [<c07e4198>] (driver_register) from [<c07e5cb0>] (__platform_driver_register+0x58/0x74) [<c07e5cb0>] (__platform_driver_register) from [<c174cb30>] (s5p_mfc_driver_init+0x1c/0x20) [<c174cb30>] (s5p_mfc_driver_init) from [<c0102690>] (do_one_initcall+0x64/0x258) [<c0102690>] (do_one_initcall) from [<c17014c0>] (kernel_init_freeable+0x3d0/0x4d0) [<c17014c0>] (kernel_init_freeable) from [<c116eeb4>] (kernel_init+0x18/0x134) [<c116eeb4>] (kernel_init) from [<c010bbd8>] (ret_from_fork+0x14/0x3c) ---[ end trace dc54c54bd3581296 ]--- This patch moves initialization of DMA-debug to core_initcall. This is safe from the initialization perspective. dma_debug_do_init() internally calls debugfs functions and debugfs also gets initialised at core_initcall(), and that is earlier than arch code in the link order, so it will get initialized just before the DMA-debug. Reported-by: Seung-Woo Kim <[email protected]> Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Russell King <[email protected]>
2016-11-15ARM: 8624/1: proc-v7m.S: fix init section nameNicolas Pitre1-1/+1
There is no .text.init sections. Signed-off-by: Nicolas Pitre <[email protected]> Signed-off-by: Russell King <[email protected]>
2016-10-19ARM: fix oops when using older ARMv4T CPUsRussell King1-10/+24
Alexander Shiyan reports that CLPS711x fails at boot time in the data exception handler due to a NULL pointer dereference. This is caused by the late-v4t abort handler overwriting R9 (which becomes zero). Fix this by making the abort handler save and restore R9. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c3b58000 [00000008] *pgd=800000000, *pte=00000000, *ppte=feff4140 Internal error: Oops: 63c11817 [#1] PREEMPT ARM CPU: 0 PID: 448 Comm: ash Not tainted 4.8.1+ #1 Hardware name: Cirrus Logic CLPS711X (Device Tree Support) task: c39e03a0 ti: c3b4e000 task.ti: c3b4e000 PC is at __dabt_svc+0x4c/0x60 LR is at do_page_fault+0x144/0x2ac pc : [<c000d3ac>] lr : [<c000fcec>] psr: 60000093 sp : c3b4fe6c ip : 00000001 fp : b6f1bf88 r10: c387a5a0 r9 : 00000000 r8 : e4e0e001 r7 : bee3ef83 r6 : 00100000 r5 : 80000013 r4 : c022fcf8 r3 : 00000000 r2 : 00000008 r1 : bf000000 r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 0000217f Table: c3b58055 DAC: 00000055 Process ash (pid: 448, stack limit = 0xc3b4e190) Stack: (0xc3b4fe6c to 0xc3b50000) fe60: bee3ef83 c05168d1 ffffffff 00000000 c3adfe80 fe80: c3a03300 00000000 c3b4fed0 c3a03400 bee3ef83 c387a5a0 b6f1bf88 00000001 fea0: c3b4febc 00000076 c022fcf8 80000013 ffffffff 0000003f bf000000 bee3ef83 fec0: 00000004 00000000 c3adfe80 c00e432c 00000812 00000005 00000001 00000006 fee0: b6f1b000 00000000 00010000 0003c944 0004d000 0004d439 00010000 b6f1b000 ff00: 00000005 00000000 00015ecc c3b4fed0 0000000a 00000000 00000000 c00a1dc0 ff20: befff000 c3a03300 c3b4e000 c0507cd8 c0508024 fffffff8 c3a03300 00000000 ff40: c0516a58 c00a35bc c39e03a0 000001c0 bea84ce8 0004e008 c3b3a000 c00a3ac0 ff60: c3b40374 c3b3a000 bea84d11 00000000 c0500188 bea84d11 bea84ce8 00000001 ff80: 0000000b c000a304 c3b4e000 00000000 bea84ce4 c00a3cd0 00000000 bea84d11 ffa0: bea84ce8 c000a160 bea84d11 bea84ce8 bea84d11 bea84ce8 0004e008 0004d450 ffc0: bea84d11 bea84ce8 00000001 0000000b b6f45ee4 00000000 b6f5ff70 bea84ce4 ffe0: b6f2f130 bea84cb0 b6f2f194 b6ef29f4 a0000010 bea84d11 02c7cffa 02c7cffd [<c000d3ac>] (__dabt_svc) from [<c022fcf8>] (__copy_to_user_std+0xf8/0x330) [<c022fcf8>] (__copy_to_user_std) from [<c00e432c>] +(load_elf_binary+0x920/0x107c) [<c00e432c>] (load_elf_binary) from [<c00a35bc>] +(search_binary_handler+0x80/0x16c) [<c00a35bc>] (search_binary_handler) from [<c00a3ac0>] +(do_execveat_common+0x418/0x600) [<c00a3ac0>] (do_execveat_common) from [<c00a3cd0>] (do_execve+0x28/0x30) [<c00a3cd0>] (do_execve) from [<c000a160>] (ret_fast_syscall+0x0/0x30) Code: e1a0200d eb00136b e321f093 e59d104c (e5891008) ---[ end trace 4b4f8086ebef98c5 ]--- Fixes: e6978e4bf181 ("ARM: save and reset the address limit when entering an exception") Reported-by: Alexander Shiyan <[email protected]> Tested-by: Alexander Shiyan <[email protected]> Signed-off-by: Russell King <[email protected]>
2016-10-11Merge branch 'work.uaccess2' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull uaccess.h prepwork from Al Viro: "Preparations to tree-wide switch to use of linux/uaccess.h (which, obviously, will allow to start unifying stuff for real). The last step there, ie PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h` is not taken here - I would prefer to do it once just before or just after -rc1. However, everything should be ready for it" * 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: remove a stray reference to asm/uaccess.h in docs sparc64: separate extable_64.h, switch elf_64.h to it score: separate extable.h, switch module.h to it mips: separate extable.h, switch module.h to it x86: separate extable.h, switch sections.h to it remove stray include of asm/uaccess.h from cacheflush.h mn10300: remove a bogus processor.h->uaccess.h include xtensa: split uaccess.h into C and asm sides bonding: quit messing with IOCTL kill __kernel_ds_p off mn10300: finish verify_area() off frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h exceptions: detritus removal
2016-10-07Merge tag 'armsoc-soc' of ↵Linus Torvalds1-60/+3
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "These are updates for platform specific code on 32-bit ARM machines, essentially anything that can not (yet) be expressed using DT files. Noteworthy changes include: - We get support for running in big-endian mode on two platforms: sunxi (Allwinner) and s3c24xx (old Samsung). - The recently added Uniphier platform now uses standard PSCI methods for SMP booting and we remove support for old bootloader versions that did not support it yet. - In sunxi, we gain support for the "Nextthing GR8" SoC, which is a close relative of the Allwinner A13 and R8 chips. - PXA completes its move over to the generic dmaengine framework and removes its old private API - mach-bcm gains support for BCM47189/BCM53573, their first ARM SoC with integrated 802.11ac wireless networking" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) ARM: imx legacy: pca100: move peripheral initialization to .init_late ARM: imx legacy: mx27ads: move peripheral initialization to .init_late ARM: imx legacy: mx21ads: move peripheral initialization to .init_late ARM: imx legacy: pcm043: move peripheral initialization to .init_late ARM: imx legacy: mx35-3ds: move peripheral initialization to .init_late ARM: imx legacy: mx27-3ds: move peripheral initialization to .init_late ARM: imx legacy: imx27-visstrim-m10: move peripheral initialization to .init_late ARM: imx legacy: vpr200: move peripheral initialization to .init_late ARM: imx legacy: mx31moboard: move peripheral initialization to .init_late ARM: imx legacy: armadillo5x0: move peripheral initialization to .init_late ARM: imx legacy: qong: move peripheral initialization to .init_late ARM: imx legacy: mx31-3ds: move peripheral initialization to .init_late ARM: imx legacy: pcm037: move peripheral initialization to .init_late ARM: imx legacy: mx31lilly: move peripheral initialization to .init_late ARM: imx legacy: mx31ads: move peripheral initialization to .init_late ARM: imx legacy: mx31lite: move peripheral initialization to .init_late ARM: imx legacy: kzm: move peripheral initialization to .init_late MAINTAINERS: update list of Oxnas maintainers ARM: orion5x: remove extraneous NO_IRQ ARM: orion: simplify orion_ge00_switch_init ...
2016-10-06Merge tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-0/+63
Pull dmaengine updates from Vinod Koul: "This is bit large pile of code which bring in some nice additions: - Error reporting: we have added a new mechanism for users of dmaenegine to register a callback_result which tells them the result of the dma transaction. Right now only one user (ntb) is using it. - As we discussed on KS mailing list and pointed out NO_IRQ has no place in kernel, this also remove NO_IRQ from dmaengine subsystem (both arm and ppc users) - Support for IOMMU slave transfers and its implementation for arm. - To get better build coverage, enable COMPILE_TEST for bunch of driver, and fix the warning and sparse complaints on these. - Apart from above, usual updates spread across drivers" * tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (169 commits) async_pq_val: fix DMA memory leak dmaengine: virt-dma: move function declarations dmaengine: omap-dma: Enable burst and data pack for SG DT: dmaengine: rcar-dmac: document R8A7743/5 support dmaengine: fsldma: Unmap region obtained by of_iomap dmaengine: jz4780: fix resource leaks on error exit return dma-debug: fix ia64 build, use PHYS_PFN dmaengine: coh901318: fix integer overflow when shifting more than 32 places dmaengine: edma: avoid uninitialized variable use dma-mapping: fix m32r build warning dma-mapping: fix ia64 build, use PHYS_PFN dmaengine: ti-dma-crossbar: enable COMPILE_TEST dmaengine: omap-dma: enable COMPILE_TEST dmaengine: edma: enable COMPILE_TEST dmaengine: ti-dma-crossbar: Fix of_device_id data parameter usage dmaengine: ti-dma-crossbar: Correct type for of_find_property() third parameter dmaengine/ARM: omap-dma: Fix the DMAengine compile test on non OMAP configs dmaengine: edma: Rename set_bits and remove unused clear_bits helper dmaengine: edma: Use correct type for of_find_property() third parameter dmaengine: edma: Fix of_device_id data parameter usage (legacy vs TPCC) ...
2016-10-06Merge branches 'misc' and 'sa1111-base' into for-linusRussell King2-6/+18
Powered by cgit, Gruvboxed by Blaster4385.