aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-ux500
AgeCommit message (Collapse)AuthorFilesLines
2012-03-16Merge branch 'spear/dt' into next/dt2Arnd Bergmann1-1/+1
* spear/dt: ARM: SPEAr600: Add device-tree support to SPEAr600 boards (update to v3.3-rc7) Conflicts: arch/arm/mach-spear6xx/spear6xx.c arch/arm/mach-vexpress/Kconfig The conflicts are between the previous contents of the next/dt2 branch and upstream changes from v3.3-rc7. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16Merge branch 'ux500/dt' into next/dt2Arnd Bergmann23-350/+632
* ux500/dt: ARM: ux500: Provide local timer support for Device Tree ARM: ux500: Enable PL022 SSP Controller in Device Tree ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree ARM: ux500: db8500: list most devices in the snowball device tree ARM: ux500: split dts file for snowball into generic part ARM: ux500: combine the board init functions for DT boot ARM: ux500: Initial Device Tree support for Snowball ARM: ux500: CONFIG: Enable Device Tree support for future endeavours ARM: ux500: fix compilation after local timer rework (adds dependency on localtimer branch, irqdomain branch and ux500/soc branch) Conflicts: arch/arm/mach-ux500/devices-common.c This adds patches from Lee Jones, Niklas Hernaeus and myself to provide initial device tree support on the ux500 platform. The pull request from Lee contained some other changes, so I rebased the patches on top of the branches that are actually dependencies for this. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Provide local timer support for Device TreeLee Jones1-3/+8
This enables local timer (AKA: private timer) support for all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Enable PL022 SSP Controller in Device TreeLee Jones1-3/+3
This SSP Controller supports a number of serial communication methods and as such cannot be registered using of_register_spi_devices. Instead we register it simply as a primecell device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Enable PL310 Level 2 Cache Controller in Device TreeLee Jones1-1/+6
This provides PL310 Level 2 Cache Controller Device Tree support for all u8500 based devices. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Enable PL011 AMBA UART Controller for Device TreeLee Jones1-1/+3
Enables the 3 UARTs found on a u8500 using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device TreeLee Jones1-1/+13
This enables the embedded GIC on all u8500 based hardware using DT. Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: db8500: list most devices in the snowball device treeLee Jones1-0/+14
This adds all devices that are normally present through the u8500_init_machine function in the device tree as well, which will duplicate the devices that are visible. This will not do much by itself because the device from the device tree are not matched by any device driver until they are converted as well. The next step is to move over one device at a time to actually be used from the device tree instead of the hardcoded device using auxdata to pass the correct platform_data. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: combine the board init functions for DT bootArnd Bergmann1-6/+51
This lets us move over evertything to device tree one by one. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: Initial Device Tree support for SnowballArnd Bergmann2-0/+35
This provides very basic Device Tree support for ST-Ericsson's low-cost development platform, Snowball. If Device Tree for ux500 is enabled and the correct board is configured within the Device Tree blob, the correct *_init_machine() will be called. This patch is based on some original work completed by: Niklas Hernaeus <niklas.hernaeus@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Niklas Hernaeus <niklas.hernaeus@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16ARM: ux500: CONFIG: Enable Device Tree support for future endeavoursLee Jones1-0/+6
Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-16Merge branch 'ux500/soc' into ux500/dtArnd Bergmann18-304/+477
2012-03-15Merge branch 'for-armsoc' of ↵Arnd Bergmann3-48/+3
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm into next/soc2 Conflicts: arch/arm/mach-tegra/common.c arch/arm/mach-ux500/devices-common.c This resolves two conflicts and lets us merge the exynos5 branch cleanly. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15Merge branch 'fixes' of git://gitorious.org/linux-davinci/linux-davinci into ↵Arnd Bergmann1-1/+1
next/fixes-non-critical * 'fixes' of git://gitorious.org/linux-davinci/linux-davinci: (2 commits) ARM: davinci: DA850: move da850_register_pm to .init.text ARM: davinci: cpufreq: fix compiler warning (update to v3.3-rc7) Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-03-15ARM: ux500: fix compilation after local timer reworkMarc Zyngier1-1/+1
mach-ux500/timer.c lacked the inclusion of mach/irqs.h, and thus failed to compile. Fix it and also remove an unused variable. Test compiled only. Reported-by: Lee Jones <lee.jones@linaro.org> Cc: Arnd Bergman <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-03-13ARM: __io abuse cleanupRob Herring1-1/+1
Several platforms incorrectly use __io() for casting to 'void __iomem *'. This converts all of those uses to use the common IOMEM macro. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-sh@vger.kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-03-13ARM: ux500: convert to twd_local_timer_register() interfaceMarc Zyngier4-38/+25
Add support for the new smp_twd runtime registration interface to the ux500 platforms, and remove the old compile-time support. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2012-03-13Merge branch 'ux500/timers' into next/timerArnd Bergmann2-6/+4
* ux500/timers: ARM: plat-nomadik: modernize MTU timer ARM: plat-nomadik: handle clocking properly ARM: plat-nomadik: get rid of global mtu base pointer
2012-03-06ARM: remove bunch of now unused mach/io.h filesRob Herring1-22/+0
Now that many platforms don't need mach/io.h, remove the unused ones. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org>
2012-03-06mfd: Support AB9540 ab8500 variantLinus Walleij1-1/+1
The AB9540 variant of the AB8500 is basically close enough to use the same driver. This adds the new registers and deviations for this new chip variant. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-02-29bug.h: add include of it to various implicit C usersPaul Gortmaker1-0/+1
With bug.h currently living right in linux/kernel.h there are files that use BUG_ON and friends but are not including the header explicitly. Fix them up so we can remove the presence in kernel.h file. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-02-29ARM: ux500: solve some Kconfig messLinus Walleij3-12/+15
First rename the config option MACH_U8500 to MACH_MOP500 because that is what it's obviously all about, this has confused me for the last time. Fix some whitespace in the process. Since the machine descriptors for HREFv60 and snowball are clearly in the file board-mop500.c which only compiles if MACH_MOP500 (former MACH_U8500) is set, select this for the board variants and nothing else. For the MOP500 variants the UIB (user interface board) is probed using I2C so select I2C and I2C_NOMADIK so we know that this probe will always be successful. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-29ARM: ux500: delete TPS6105X selectionLinus Walleij1-1/+0
Having this driver selected here only cause problems, get it out of there and selected it from menuconfig or wherever instead. Mea culpa. Cc: Mathieu Poirer <mathieu.poirier@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-29ARM: ux500: select CPU_FREQ_TABLE where neededArnd Bergmann1-0/+1
The ux500 platform requires CPU_FREQ_TABLE support to be enabled for its CPU_FREQ implementations, so automatically select that when CPU_FREQ is enabled. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> [Rebased due to missing other patches in the stack] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-29ARM: ux500: select L2X0 cache on ux500Arnd Bergmann1-0/+1
The cache controller needs to be enabled for the cortex-a9 specific errata that are also selected to work. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-29ARM: ux500: add board autoselectionArnd Bergmann1-10/+14
At least one platform needs to be selected, so pick the u8500 development board if nothing else is selected. The first menu to choose the actual platform is meaningless and can be made invisible. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-29ARM: ux500: included linux/gpio.h twiceDanny Kukawka1-1/+0
arch/arm/mach-ux500/board-mop500-u8500uib.c included 'linux/gpio.h' remove the duplicate. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-29ARM: ux500: fix around AB8500 GPIO macro namePhilippe Langlais2-2/+2
AB8500 GPIO1 is the base of AB8500 gpio number too. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-29ARM: ux500: Add audio-regulatorsOla Lilja1-0/+28
Add regulators Vaud, Vamic1, Vamic2 and Vdmic used by audio. Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-29ARM: ux500: Add DMA-channels for MSPOla Lilja2-0/+8
Add DMA-channels for MSP0, MSP1, MSP2 and MSP3. Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-29ARM: ux500: Add placeholder for clk_set_parentOla Lilja2-0/+8
Calling clk_set_parent (e.g. from Ux500 ASoC-driver) generates build-errors. Signed-off-by: Ola Lilja <ola.o.lilja@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-02-27ARM: 7346/1: errata: fix PL310 erratum #753970 workaround selectionWill Deacon1-1/+1
Commit fa0ce403 ("ARM: 7162/1: errata: tidy up Kconfig options for PL310 errata workarounds") introduced a consistent naming scheme for errata workarounds, but forgot to update the platforms selecting workarounds using the old names. This patch updates ux500 and vexpress to select the appropriate PL310 errata workarounds. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-22Merge branch 'entry-macro-cleanup' of git://sources.calxeda.com/kernel/linux ↵Russell King1-18/+0
into for-armsoc
2012-02-21ARM: remove disable_fiq and arch_ret_to_user macrosRob Herring1-18/+0
Now that most platforms don't need disable_fiq and arch_ret_to_user macros, we can remove the empty macros or empty entry-macro.S files. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Shawn Guo <shawn.guo@linaro.org>
2012-02-13ARM: ux500: remove intermediary add_platform_device* functionsLee Jones3-76/+33
These are no longer required since a 'parent' pointer is now passed to each registering device. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-13ARM: ux500: move top level platform devices in sysfs to /sys/devices/socXLee Jones6-4/+40
At the request of Arnd Bergmann this patch moves all SoC platform devices found in sysfs from /sys/devices/platform to /sys/devices/soc<SoCNum>/. It is believed as the devices are SoC specific and a /sys/devices/soc node has recently become available, that this would be a more appropriate place to display the data. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-13ARM: ux500: export System-on-Chip information ux500 via sysfsLee Jones6-14/+130
Here we make use of the new System-On-Chip bus driver to export vital SoC information out to userspace via sysfs. This patch provides a data structure of strings to populate the base nodes found in: /sys/devices/soc[0|1|2|...]/[family|machine|revision|soc_id]. It also adds one more node as requested by ST-Ericsson. 'process' depicts the way in which the silicon was manufactured. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-13ARM: ux500: pass parent pointer to each platform deviceLee Jones15-225/+289
This patch provides a means for any device within ux500 platform code to allocate its own parent. This is particularly prudent with the introduction of /sys/devices/socX, as a device can now proclaim to be integral part of an SoC, rather than a more generic platform device. Latter patches make good use of this functionality. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-07Merge tag 'v3.3-rc2' into depends/rmk/for-armsocOlof Johansson6-47/+12
There were conflicts between fixes going in after 3.3-rc1 and Russell's stable arm-soc base branch. Resolving it in the dependency branch so that each topic branch shares the same resolution. Conflicts: arch/arm/mach-at91/at91cap9.c arch/arm/mach-at91/at91sam9g45.c
2012-01-31ARM: plat-nomadik: get rid of global mtu base pointerLinus Walleij2-6/+4
Pass the base offset to the Nomadik MTU timer in the init call instead of keeping a global pointer to be assigned. Acked-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-28Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2-0/+2
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (31 commits) ARM: 7304/1: ioremap: fix boundary check when reusing static mapping ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2 ARM: 7298/1: realview: fix mapping of MPCore private memory region PCMCIA: fix sa1111 oops on remove ARM: 7288/1: mach-sa1100: add missing module_init() call ARM: 7297/1: smp_twd: make sure timer is stopped before registering it ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards ARM: 7295/1: cortex-a7: move proc_info out of !CONFIG_ARM_LPAE block ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMP ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs ARM: 7290/1: vmlinux.lds.S: align the exception fixup table to a 4-byte boundary ARM: 7289/1: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes MFD: ucb1x00-ts: fix resume failure MFD: ucb1x00-core: fix gpiolib direction_output handling MFD: ucb1x00-core: fix missing restore of io output data on resume MFD: mcp-core: fix mcp_priv() to be more type safe MFD: mcp-core: fix complaints from the genirq layer Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus." Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources." ... Fix up conflict due to arch/arm/mach-mx5/Kconfig having been merged into mach-imx5 (commit 784a90c0a7d8: "ARM i.MX: Merge i.MX5 support into mach-imx"), but the ARM_L1_CACHE_SHIFT_6 entry was moved to be driven by the CPU_V7 logic from it in the old location in rmk's branch (commit a092f2b15399: "ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs").
2012-01-26Merge branch 'amba' into for-armsocRussell King1-10/+3
2012-01-25ARM: amba: ux500: get rid of NO_IRQRussell King1-1/+0
irq 0 now means no irq, so get rid of this unnecessary initializer. Acked-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25ARM: amba: ux500: convert to use amba_device_allocRussell King1-9/+3
Convert ux500 to use the new amba_device_alloc APIs. Acked-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-23ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMPWill Deacon2-0/+2
It turns out that the logical CPU mapping is useful even when !CONFIG_SMP for manipulation of devices like interrupt and power controllers when running a UP kernel on a CPU other than 0. This can happen when kexecing a UP image from an SMP kernel. In the future, multi-cluster systems running AMP configurations will require something similar for mapping cluster IDs, so it makes sense to decouple this logic in preparation for this support. Acked-by: Yang Bai <hamo.by@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reported-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20ARM: big removal of now unused arch_idle()Nicolas Pitre1-20/+0
When this is the only content remaining in mach/system.h then the whole file is removed. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-and-tested-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: David Brown <davidb@codeaurora.org> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-20mach-ux500: no MMC_CAP_SD_HIGHSPEED on SnowballPhilippe Langlais1-0/+2
MMC_CAP_SD_HIGHSPEED is not supported on Snowball board resulting on initialization errors. Cc: stable@kernel.org Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-20mach-ux500: enable ARM errata 764369Srinidhi KASAGAR1-0/+1
This applies ARM errata 764369 for all ux500 platforms. Cc: stable@kernel.org Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-20mach-ux500: do not override outer.inv_allsrinidhi kasagar1-41/+7
Invalidating outer cache without disabling it is a big nono, and so, remove the machine specific outer.inv_all And at the same time it does not prevent us overriding outer.disable as we do not have any such secure SMI to handle the same while kexec disables the outer cache. Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-01-20mach-ux500: musb: now musb is always in OTG modePhilippe Langlais1-6/+0
This change is needed after 622859634 "usb: musb: drop a gigantic amount of ifdeferry", where CONFIG_USB_MUSB_PERIPHERAL & CONFIG_USB_MUSB_HOST has been removed. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Powered by cgit, Gruvboxed by Blaster4385.