aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-ux500
AgeCommit message (Collapse)AuthorFilesLines
2011-03-14mach-ux500: basic HREFv60 support v2Linus Walleij5-16/+81
The HREFv60 variant of the MOP500 family of boards remove the external GPIO expander and route these pins back to some of the readily available internal GPIO pins instead. Based on a patch by Bibek Basu <bibek.basu@stericsson.com> for an internal kernel version. Cc: Bibek Basu <bibek.basu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add hrefv60 GPIO pinsBibek Basu2-90/+200
This will centralize all GPIO pin muxing for the different boards in the MOP500 family to a single file. It also kills off the deprecated support for the ED (Early Drop) ASIC, this should never be spotted in the open and ST-Ericsson have internally deprecated this hardware. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> [Rebasing and kill old ASIC support] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: move MOP500 pins to separate fileRabin Vincent4-63/+84
Split off pin definitions for the MOP500 board family to its own file. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14plat-nomadik: support varying number of GPIOs per blockRabin Vincent1-0/+1
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Added constant 32-pin assignment in platform data] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: config Ux500 PL011 PL022 PL180 for DMALinus Walleij8-33/+288
This will configure the platform data for the PL011, PL022 and PL180 (derivate) PrimeCells found in the Ux500 to use DMA with the generic DMA engine for DMA40. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add MUSB to db5500 devicesMian Yousaf Kaukab3-0/+44
- DMA tx and rx maps for usb channels are set to be configured at runtime - MUSB is enabled with soc specific base address, irq and dma configurations Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add MUSB to db8500 devicesMian Yousaf Kaukab4-2/+64
- DMA tx and rx maps for usb channels are set to be configured at runtime - GPIO configurations for usb are added - MUSB is enabled with soc specific base address, irq and dma configurations Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: update MUSB clock configurationsMian Yousaf Kaukab1-2/+2
MUSB driver has been updated to separate out BSP layer from its generic parts, as separate driver. This patch configures the clock with the new platform driver name. Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add platform data for musbMian Yousaf Kaukab3-1/+186
USB resources and DMA40 configurations are dynamically with the data provided in ux500_add_usb() call. Though only DMA40 configurations differ between U8500 and U5500 (USB resource are common between them). Signed-off-by: Mian Yousaf Kaukab <mian-yousaf.kaukab@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: fix inverted SD-card GPIO pinPhilippe Langlais1-2/+2
The levelshifter pins were set to inverted values, fix this up. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: set sd/mmc clock rate to 100MHzPhilippe Langlais1-1/+1
The clock speed for the SD/MMC clock was incorrect, rectify it. Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: Add Rohm BH1780GLI Light Sensor to i2c_board_infoLee Jones1-0/+4
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: platform data for LP5521 leds driverPhilippe Langlais1-1/+67
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: platform data for SFH7741 proximity sensor driverPhilippe Langlais2-0/+53
Proximity sensor is managed as an input event (SW_PROXIMITY). Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> [Named GPIO pin] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: delete old keypad board fileLinus Walleij2-230/+0
We register keypads per-UIB now, remove this. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add U8500 UIB platform dataSundar Iyer2-0/+100
The U8500 UIB contains a Synaptics RMI touchpanel and a matrix keyboard via the TC35893 port expander device. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add ST-UIB platform dataSundar Iyer2-0/+184
The ST-UIB contains a matrix keypad interfaced with the STMPE1601 port expander and a ROHM BU2101 touch panel. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: dynamic UIB (user interface boards) detectionRabin Vincent6-4/+173
Add support for dynamic detection of the UIB used (at the cost of one i2c error on the lesser-used UIB) and also provide an override via a command line parameter if needed. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: fix ux500 build errorSundar Iyer1-2/+2
Include ab8500 regulators for DB8500 SoC by default and fix build issues Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> [Small fixup for changed boardfiles] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add a few AB8500 regulator consumers v3Linus Walleij1-0/+62
Try to make the regulators a little bit more useful by adding some of the most basic consumers we're going to have in the end. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Rabin Vincent <rabin@rab.in> Cc: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-14mach-ux500: add DB5500 PMU resourcesLinus Walleij1-3/+25
This adds the PMU resources necessary to get perf working with the DB5500 ASIC. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-02-17mach-ux500: DB8500 PMU supportRabin Vincent1-4/+47
DB8500 has irqs from two cores ORed into one. Implement a workaround to handle this by bouncing the interrupt by setting the affinity to the other core when the interrupt appears to be spurious on the current core. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-01-12mach-ux500: Updated and connected ab8500 regulator board configurationBengt Jonsson3-79/+96
The ab8500 regulator board configuration is updated and put in an array which can easily be used in the MFD board configuration. The regulator board configuration is also added to the MFD configuration in this patch. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-01-10ux500: allow 5500 and 8500 to be built togetherRabin Vincent1-12/+14
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: modem_irq is only for 5500Rabin Vincent1-0/+5
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Modified to hit the right file] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: dynamic SOC detectionRabin Vincent8-136/+212
Dynamically detect the DBx500 SOC an revision based on the ASIC ID. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: rename MOP board KconfigRabin Vincent2-2/+2
Rename the MOP board Kconfig entries to the same name as the machine type, so that the machine_is_*() macros work correctly. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Updated to match changes in the tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-10ux500: remove build-time changing macrosRabin Vincent9-117/+123
To allow the possiblity of building U8500 and U5500 support in the same image. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> [Rebased to latest changes in Russells tree] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2011-01-06Merge branch 'devel-stable' into develRussell King38-727/+1787
Conflicts: arch/arm/mach-pxa/clock.c arch/arm/mach-pxa/clock.h
2011-01-06Merge branch 'misc' into develRussell King5-70/+30
Conflicts: arch/arm/Kconfig arch/arm/common/Makefile arch/arm/kernel/Makefile arch/arm/kernel/smp.c
2011-01-06Merge branch 'smp' into miscRussell King5-71/+32
Conflicts: arch/arm/kernel/entry-armv.S arch/arm/mm/ioremap.c
2010-12-29ux500: add TC35893 keypad platform dataSundar Iyer1-1/+64
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-24ARM: 6539/1: ux500: remove unnecessary barrier from the secondary startupSrinidhi Kasagar1-1/+0
Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-22ux500: rename modem IRQ and MBOX filesLinus Walleij4-3/+3
Suffix the U5500 modem IRQ and MBOX files with *-db5500* so that we clearly know the SoC they belong to, in line with the rest of the files in mach-ux500. Cc: Stefan Nilsson <stefan.xk.nilsson@stericsson.com> Cc: Martin Persson <martin.persson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-20ARM: Fix subtle race in CPU pen_release hotplug codeRussell King1-7/+15
There is a subtle race in the CPU hotplug code, where a CPU which has been offlined can online itself before being requested, which results in things going astray on the next online/offline cycle. What happens in the normal online/offline/online cycle is: CPU0 CPU3 requests boot of CPU3 pen_release = 3 flush cache line checks pen_release, reads 3 starts boot pen_release = -1 ... requests CPU3 offline ... ... dies ... checks pen_release, reads -1 requests boot of CPU3 pen_release = 3 flush cache line checks pen_release, reads 3 starts boot pen_release = -1 However, as the write of -1 of pen_release is not fully flushed back to memory, and the checking of pen_release is done with caches disabled, this allows CPU3 the opportunity to read the old value of pen_release: CPU0 CPU3 requests boot of CPU3 pen_release = 3 flush cache line checks pen_release, reads 3 starts boot pen_release = -1 ... requests CPU3 offline ... ... dies ... checks pen_release, reads 3 starts boot pen_release = -1 requests boot of CPU3 pen_release = 3 flush cache line Fix this by grouping the write of pen_release along with its cache line flushing code to ensure that any update to pen_release is always pushed out to physical memory. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: remove smp_mpidr.hRussell King1-1/+0
With "ARM: CPU hotplug: remove bug checks in platform_cpu_die()", we now do not use hard_smp_processor_id(), we no longer need to read the hardware processor ID. Remove the include providing this function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: CPU hotplug: remove bug checks in platform_cpu_die()Russell King1-10/+0
platform_cpu_die() is entered from the CPU's own idle thread, which can not be migrated to other CPUs. Moreover, the 'cpu' argument comes from the thread info, which will always be the 'current' CPU. So remove this useless bug check. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: CPU hotplug: move cpu_killed completion to core codeRussell King1-7/+1
We always need to wait for the dying CPU to reach a safe state before taking it down, irrespective of the requirements of the platform. Move the completion code into the ARM SMP hotplug code rather than having each platform re-implement this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: consolidate trace_hardirqs_off() into common SMP codeRussell King1-2/+0
All platforms call trace_hardirqs_off() in their secondary startup code, so move this into the core SMP code - it doesn't need to be in the per-platform code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: consolidate the common parts of smp_prepare_cpus()Russell King1-21/+3
There is a certain amount of smp_prepare_cpus() which doesn't belong in the platform support code - that is, code which is invariant to the SMP implementation. Move this code into arch/arm/kernel/smp.c, and add a platform_ prefix to the original function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: get rid of get_core_count()Russell King1-6/+3
We don't need this small function as well as scu_get_core_count() Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: Clean up ncores sanity checksRussell King1-6/+0
scu_get_core_count() never returns zero cores, so we don't need to check and correct if ncores is zero. Tegra was missing the check against NR_CPUS, leading to a potential bitfield overflow if this becomes the case. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ARM: SMP: move CPU number sanity checks to smp_init_cpus()Russell King1-13/+13
Ensure that the number of CPUs is sanity checked before setting the number of possible CPUs. This avoids any chance of overflowing the cpu_possible bitmap. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-20ux500: add debugfs support for powerdebugVincent Guittot2-1/+198
Signed-off-by: Vincent Guittot <vincent.guittot@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19ux500: platsmp: Fix section mismatchJonas Aaberg1-1/+1
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mach-ux500: add STMPE1601 platform dataSundar Iyer3-2/+49
Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> [Minor fixups to GPIO enumerators] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mach-ux500: move keymaps to new fileSundar Iyer5-111/+140
Move keylayouts to a dedicated file and plug these keylayouts for input platform data. This will make addition of new and custom keylayouts localized. Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mfd/tc3589x: add block identifier for multiple child devicesSundar Iyer1-0/+1
Add block identifier to be able to add multiple mfd clients to the mfd core Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mfd/tc3589x: rename tc35892 structs/registers to tc359xSundar Iyer1-7/+5
Most of the register layout, client IRQ numbers on the TC35892 is shared also by other variants. Make this generic as tc3589x Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-19mach-ux500: deprecate spi support for ab8500Sundar Iyer1-35/+1
Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Sundar Iyer <sundar.iyer@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Powered by cgit, Gruvboxed by Blaster4385.