aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap2/pdata-quirks.c
AgeCommit message (Collapse)AuthorFilesLines
2018-02-28ARM: OMAP2+: Enable ti-sysc to use device tree data for smartreflexTony Lindgren1-0/+1
Let's enable ti-sysc probing of child devices. So far we have only used ti-sysc to probe interconnect target modules to idle them for cases where the SoC does not have any child devices configured for the module, such as smartreflex on dra7. As we have smartreflex driver configured in the device tree for some SoCs, we need to flip things on with a single patch to prevent both omap_device and ti-sysc to probe smartreflex. So let's stop probing smartreflex with omap_device and probe it with ti-sysc by enabling passing the auxdata. Signed-off-by: Tony Lindgren <[email protected]>
2018-02-26bus: ti-sysc: Add support for platform data callbacksTony Lindgren1-1/+39
We want to pass the device tree configuration for interconnect target modules from ti-sysc driver to the existing platform hwmod code. This allows us to first validate the dts data against the existing platform data before we start dropping the platform data in favor of device tree data. To do this, let's add platform data callbacks for PM runtime functions to call for the interconnect target modules if platform data is available. Note that as ti-sysc driver can rebind, omap_auxdata_lookup and related functions can no longer be __init. Signed-off-by: Tony Lindgren <[email protected]>
2018-02-22ARM: OMAP2+: Prepare to pass auxdata for smartreflexTony Lindgren1-0/+13
We are still initializing smartreflex with platform data using omap_device_build(). We can instead pass the platform data in with auxdata in pdata-quirks.c and make the driver use that in later patches. Note that we cannot enable the auxdata use yet, this is done in the last patch of the series. Signed-off-by: Tony Lindgren <[email protected]>
2018-02-22ARM: OMAP: pdata-quirks: Remove unused timer pdataKeerthy1-32/+0
Remove unused timer pdata. Signed-off-by: Keerthy <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Tested-by: Ladislav Michl <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2018-02-22ARM: OMAP: Move dmtimer.h out of plat-omapKeerthy1-1/+1
The header file is currently under plat-omap directory under arch/omap. Move this out to an accessible place. No Code changes done to the header file and renamed to timer-ti-dm.h. Signed-off-by: Keerthy <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Tested-by: Ladislav Michl <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2017-08-10ARM: OMAP2+: Add pdata-quirks for MMC/SD on DRA74x EVMSekhar Nori1-0/+31
DRA74x EVM Rev H EVM comes with revision 2.0 silicon. However, earlier versions of EVM can come with either revision 1.1 or revision 1.0 of silicon. The device-tree file is written to support rev 2.0 of silicon. pdata quirks are used to then override the settings needed for PG 1.1 silicon. PG 1.1 silicon has limitations w.r.t frequencies at which MMC1/2/3 can operate as well as different IOdelay numbers. Signed-off-by: Kishon Vijay Abraham I <[email protected]> Signed-off-by: Sekhar Nori <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2017-02-23Merge tag 'armsoc-fixes-nc' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC non-urgent fixes from Arnd Bergmann: "We sometimes collect non-critical fixes that come in during the later part of the merge window in a branch for the next release instead, and this is that contents for v4.11. Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks and setup. There's also some fixes for Davinci and a Kconfig fix for SCPI to only enable on ARM{,64}" * tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: firmware: arm_scpi: Add hardware dependencies ARM: OMAP3: Fix SoC detection of OMAP36/37 Family ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART ARM: dts: Fix compatible for ti81xx uarts for 8250 ARM: dts: Fix am335x and dm814x scm syscon to probe children ARM: OMAP2+: Fix init for multiple quirks for the same SoC ARM: dts: Fix omap3 off mode pull defines bus: da850-mstpri: fix my e-mail address ARM: davinci: da850: fix da850_set_pll0rate() ARM: davinci: da850: coding style fix
2017-02-21Merge tag 'media/v4.11-1' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new drivers: - i.MX6 Video Data Order Adapter's (VDOA) - Toshiba et8ek8 5MP sensor - STM DELTA multi-format video decoder V4L2 driver - SPI connected IR LED - Mediatek IR remote receiver - ZyDAS ZD1301 DVB USB interface driver - new RC keymaps - some very old LIRC drivers got removed from staging - RC core gained support encoding IR scan codes - DVB si2168 gained support for DVBv5 statistics - lirc_sir driver ported to rc-core and promoted from staging - other bug fixes, board additions and driver improvements * tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (230 commits) [media] mtk-vcodec: fix build warnings without DEBUG [media] zd1301: fix building interface driver without demodulator [media] usbtv: add sharpness control [media] cxusb: Use a dma capable buffer also for reading [media] ttpci: address stringop overflow warning [media] dvb-usb-v2: avoid use-after-free [media] add Hama Hybrid DVB-T Stick support [media] et8ek8: Fix compiler / Coccinelle warnings [media] media: fix semicolon.cocci warnings [media] media: exynos4-is: add flags to dummy Exynos IS i2c adapter [media] v4l: of: check for unique lanes in data-lanes and clock-lanes [media] coda/imx-vdoa: constify structs [media] st-delta: debug: trace stream/frame information & summary [media] st-delta: add mjpeg support [media] st-delta: EOS (End Of Stream) support [media] st-delta: rpmsg ipc support [media] st-delta: add memory allocator helper functions [media] st-delta: STiH4xx multi-format video decoder v4l2 driver [media] MAINTAINERS: add st-delta driver [media] ARM: multi_v7_defconfig: enable STMicroelectronics DELTA Support ...
2017-01-31[media] rx51: broken buildSean Young1-1/+1
As reported by kernel build test: In file included from arch/arm/mach-omap2/pdata-quirks.c:15:0: >> arch/arm/mach-omap2/pdata-quirks.c:536:49: error: 'rx51_lirc_data' undeclared here (not in a function) OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data), ^ include/linux/of_platform.h:52:21: note: in definition of macro 'OF_DEV_AUXDATA' .platform_data = _pdata } ^~~~~~ Since "a92def1 [media] ir-rx51: port to rc-core" the build fails on some arm configurations. Reported-by: kbuild test robot <[email protected]> Signed-off-by: Sean Young <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2017-01-30[media] ir-rx51: port to rc-coreSean Young1-4/+4
This driver was written using lirc since rc-core did not support transmitter-only hardware at that time. Now that it does, port this driver. Compile tested only. Signed-off-by: Sean Young <[email protected]> Cc: Timo Kokkonen <[email protected]> Cc: Ivaylo Dimitrov <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2017-01-06ARM: OMAP2+: Fix init for multiple quirks for the same SoCTony Lindgren1-1/+0
It's possible that there are multiple quirks that need to be initialized for the same SoC. Fix the issue by not returning on the first match. Signed-off-by: Tony Lindgren <[email protected]>
2017-01-05ARM: OMAP2+: Fix WL1283 Bluetooth Baud RateAdam Ford1-1/+1
Commit 485fa1261f78 ("ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth") set the wrong baud rate for the UART. The Baud rate was 300,000 and it should be 3,000,000 for WL1283. Signed-off-by: Adam Ford <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2016-11-10ARM: OMAP2+: Drop legacy ads7846 initTony Lindgren1-1/+0
2016-08-01Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-9/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Driver updates for ARM SoCs. A slew of changes this release cycle. The reset driver tree, that we merge through arm-soc for historical reasons, is also sizable this time around. Among the changes: - clps711x: Treewide changes to compatible strings, merged here for simplicity. - Qualcomm: SCM firmware driver cleanups, move to platform driver - ux500: Major cleanups, removal of old mach-specific infrastructure. - Atmel external bus memory driver - Move of brcmstb platform to the rest of bcm - PMC driver updates for tegra, various fixes and improvements - Samsung platform driver updates to support 64-bit Exynos platforms - Reset controller cleanups moving to devm_reset_controller_register() APIs - Reset controller driver for Amlogic Meson - Reset controller driver for Hisilicon hi6220 - ARM SCPI power domain support" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (100 commits) ARM: ux500: consolidate base platform files ARM: ux500: move soc_id driver to drivers/soc ARM: ux500: call ux500_setup_id later ARM: ux500: consolidate soc_device code in id.c ARM: ux500: remove cpu_is_u* helpers ARM: ux500: use CLK_OF_DECLARE() ARM: ux500: move l2x0 init to .init_irq mfd: db8500 stop passing around platform data ASoC: ab8500-codec: remove platform data based probe ARM: ux500: move ab8500_regulator_plat_data into driver ARM: ux500: remove unused regulator data soc: raspberrypi-power: add CONFIG_OF dependency firmware: scpi: add CONFIG_OF dependency video: clps711x-fb: Changing the compatibility string to match with the smallest supported chip input: clps711x-keypad: Changing the compatibility string to match with the smallest supported chip pwm: clps711x: Changing the compatibility string to match with the smallest supported chip serial: clps711x: Changing the compatibility string to match with the smallest supported chip irqchip: clps711x: Changing the compatibility string to match with the smallest supported chip clocksource: clps711x: Changing the compatibility string to match with the smallest supported chip clk: clps711x: Changing the compatibility string to match with the smallest supported chip ...
2016-06-29ir-rx51: use hrtimer instead of dmtimerIvaylo Dimitrov1-3/+0
Drop dmtimer usage for pulse timer in favor of hrtimer. That allows removing PWM dmitimer platform data usage. Signed-off-by: Ivaylo Dimitrov <[email protected]> Acked-by: Pali Rohár <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2016-06-29ir-rx51: add DT support to driverIvaylo Dimitrov1-5/+1
With the upcoming removal of legacy boot, lets add support to one of the last N900 drivers remaining without it. As the driver still uses omap dmtimer, add auxdata as well. Signed-off-by: Ivaylo Dimitrov <[email protected]> Acked-by: Rob Herring <[email protected]> Acked-by: Pali Rohár <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2016-06-29ir-rx51: use PWM framework instead of OMAP dmtimerIvaylo Dimitrov1-1/+0
Convert driver to use PWM framework instead of calling dmtimer functions directly for PWM timer. Remove paragraph about writing to the Free Software Foundation's mailing address while at it. Signed-off-by: Ivaylo Dimitrov <[email protected]> Acked-by: Pali Rohár <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2016-06-10ARM: OMAP3: pdata-quirks: Add support for McBSP2/3 sidetone handlingPeter Ujfalusi1-0/+18
McBSP2/3 module's sidetone module operates using the module's ICLK clock. When the Sidetone is in use the interface clock of the module must not idle. To prevent the iclk idling the driver expects to have pdata callback to call. With this patch the callback is going to be set up for DT boot also. Signed-off-by: Peter Ujfalusi <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2016-05-09Merge tag 'omap-for-v4.7/auxdata-signed' of ↵Arnd Bergmann1-15/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical Merge "non urgent auxdata fix for v4.7 merge window" from Tony Lindgren: Device tree auxdata handling fix that allows a match based on the compatible string if no exact match based on the IO address is found. This leaves out the need to patch auxdata for each driver when adding new SoCs. And it also reprotedly fixes the issue of passing auxdata to a child if the parent instantiates the child from DT as discussed in the "[PATCH] of/platform: Allow secondary compatible match in of_dev_lookup" mailing list thread. As a minimal use case, let's also convert omap pinctrl auxdatato use a generic match. There is no need to get this in to the v4.6-rc cycle and it can wait for v4.7 merge window. Note that these changes have now been sitting in Linux next for about two weeks so far as I wanted to make sure no new issues are popping up. * tag 'omap-for-v4.7/auxdata-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Simplify auxdata by using the generic match of/platform: Allow secondary compatible match in of_dev_lookup
2016-04-28ARM: OMAP2+: n900 needs MMC slot names for legacy user spaceTony Lindgren1-0/+7
Let's pass the slot names in pdata like the legacy code does. Once we have a generic DT binding for the slot names we can switch to that. Tested-by: Ivaylo Dimitrov <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2016-04-28ARM: OMAP2+: Add more functions to pwm pdata for ir-rx51Tony Lindgren1-1/+32
Before we start removing omap3 legacy booting support, let's make n900 DT booting behave the same way for ir-rx51 as the legacy booting does. For now, we need to pass pdata to the ir-rx51 driver. This means that the n900 tree can move to using DT based booting without having to carry all the legacy platform data with it when it gets dropped from the mainline tree. Note that the ir-rx51 driver is currently disabled because of the dependency to !ARCH_MULTIPLATFORM. This will get sorted out later with the help of drivers/pwm/pwm-omap-dmtimer.c. But first we need to add chained IRQ support to dmtimer code to avoid introducing new custom frameworks. So let's just pass the necessary dmtimer functions to ir-rx51 so we can get it working in the following patch. Cc: Neil Armstrong <[email protected]> Tested-by: Ivaylo Dimitrov <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2016-04-15ARM: OMAP2+: Simplify auxdata by using the generic matchTony Lindgren1-15/+2
We can now just use the compatible if there's no need to have device instance specific auxdata. Signed-off-by: Tony Lindgren <[email protected]>
2016-01-25ARM: OMAP: Add PWM dmtimer platform data quirksNeil Armstrong1-0/+23
In order to set the currently platform dependent dmtimer functions pointers as platform data for the pwm-omap-dmtimer platform driver, add it to plat-omap auxdata_lookup table. Suggested-by: Tony Lindgren <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2016-01-20Merge tag 'armsoc-dt' of ↵Linus Torvalds1-1/+23
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As usual, the bulk of this release is again DT file contents. There's a huge number of changes here, and it's challenging to give a crisp overview of just what is in here. To start with: New boards: - TI-based DM3730 from LogicPD (Torpedo) - Cosmic+ M4 (nommu) initial support (Freescale Vybrid) - Raspberry Pi 2 DT files - Watchdog on Meson8b - Veyron-mickey (ASUS Chromebit) DTS - Rockchip rk3228 SoC and eval board - Sigma Designs Tango4 Improvements: - Improved support for Qualcomm APQ8084, including Sony Xperia Z DT files - Misc new devices for Rockchip rk3036 and rk3288 - Allwinner updates for misc SoCs and systems ... and a _large_ number of other changes across the field. Devices added to SoC DTSI and board DTS files for a number of SoC vendors, new product boards on already-supported SoCs, cleanups and refactorings of existing DTS/DTSI files and a bunch of other changes" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (469 commits) ARM: dts: compulab: add new board description ARM: versatile: add the syscon LEDs to the DT dts: vt8500: Fix errors in SDHC node for WM8505 ARM: dts: imx6q: clean up unused ipu2grp ARM: dts: silk: Add compatible property to "partitions" node ARM: dts: gose: Add compatible property to "partitions" node ARM: dts: porter: Add compatible property to "partitions" node ARM: dts: koelsch: Add compatible property to "partitions" node ARM: dts: lager: Add compatible property to "partitions" node ARM: dts: bockw: Add compatible property to "partitions" node ARM: dts: meson8b: Add watchdog node Documentation: watchdog: Add new bindings for meson8b ARM: meson: Add status LED for Odroid-C1 ARM: dts: uniphier: fix a typo in comment block ARM: bcm2835: Add the auxiliary clocks to the device tree. ARM: bcm2835: Add devicetree for bcm2836 and Raspberry Pi 2 B ARM: bcm2835: Move the CPU/peripheral include out of common RPi DT. ARM: bcm2835: Split the DT for peripherals from the DT for the CPU ARM: realview: set up cache correctly on the PB11MPCore ARM: dts: Unify G2D device node with other devices on exynos4 ...
2015-12-22Merge tag 'omap-for-v4.5/dt-pt2' of ↵Olof Johansson1-1/+23
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Second set of omap device tree changes for v4.5 merge window. This series updates the EDMA bindings based on the various fixes to split EDMA into separate independent devices. It also adds support for more devices on the CompuLab cm-t335 and LogicPD Torpedo boards, and enables the new bindings for qspi for am437x and dra7. There are also few dra7 regulator fixes, and change of gpoi-key,wakeup to wakeup-source. These depend on commit ae0add740cd0 ("dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type") already merged into mainline. * tag 'omap-for-v4.5/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: LogicPD Torpedo: Add Touchscreen Support ARM: dts: DRA7-EVM: Add regulator-allow-bypass property for ldo9 ARM: dts: DRA72-EVM: Add regulator-allow-bypass property for ldo1 and ldo2 ARM: dts: AM4372: add entry for qspi mmap region ARM: dts: DRA7: add entry for qspi mmap region ARM: OMAP2+: LogicPD Torpedo: Revert Duplicative Entries ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth ARM: OMAP2+: LogicPD Torpedo: Add LCD Type 15 Support ARM: dts: cm-t335: add support for bluetooth ARM: dts: cm-t335: add support for DVI/LCD ARM: dts: cm-t335: add support for I2C GPIO expander ARM: dts: cm-t335: add support for SBC-T335 ARM: dts: cm-t335: add support for USB0 ARM: dts: omap: replace legacy *,wakeup property with wakeup-source ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property ARM: DTS: am437x: Use the new DT bindings for the eDMA3 ARM: DTS: am33xx: Use the new DT bindings for the eDMA3 dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type Signed-off-by: Olof Johansson <[email protected]>
2015-12-22Merge tag 'omap-for-v4.5/soc-initcall' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc SoC changes for omaps for v4.5 merge window. The main change here is to change the omap initcall levels a bit to initialize things later to allow early device drivers at core_initcall level. This makes things easier for us as most clocks can be made into regular device drivers except for a few early clocks needed to initialize system timers. I wanted to have these changes sit in Linux next for a few weeks before sending out a pull request, and so far now issues have showed up. The other changes in this series are timer changes for making use of the new PWM driver, and timer changes to support more high security SoCs. Also few minor improvments for module autoidle settings for ti81xx spinbox and dra7 debug on uart4 in hwmod code. The rest is pretty much just removal of platform data for SoCs that are all device tree only nowadays. * tag 'omap-for-v4.5/soc-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove device creation for omap-pcm-audio ARM: OMAP1: Remove device creation for omap-pcm-audio ARM: OMAP2+: Change core_initcall levels to postcore_initcall ARM: DRA7: hwmod: Enable DEBUG_LL for UART4 ARM: OMAP: RX-51: fix a typo in log writing ARM: omap4: hwmod: Remove elm address space from hwmod data ARM: OMAP2+: timer: Remove secure timer for DRA7xx HS devices ARM: OMAP: dmtimer: check for fixed timers during config ARM: OMAP2+: Remove omap_mmu_dev_attr structure ARM: OMAP4: hwmod data: Remove legacy IOMMU attr and addrs ARM: OMAP3: hwmod data: Remove legacy IOMMU data ARM: OMAP2+: Remove legacy device instantiation of IOMMUs ARM: OMAP2+: Add hwmod spinbox support for dm816x ARM: OMAP: add DT support for ti,dm816-timer ARM: OMAP: dmtimer: Add clock source from DT Signed-off-by: Olof Johansson <[email protected]>
2015-12-17ARM: OMAP2+: LogicPD Torpedo + Wireless: Add BluetoothAdam Ford1-1/+23
Bindings for the WL1283 Bluetooth was removed from the shared transport driver in commit c0bd1b9e5895 ("Revert ti-st: add device tree support") Until we havea better binding, we need to use the platform data to initialize Bluetooth. Signed-off-by: Adam Ford <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2015-11-30ARM: OMAP: RX-51: fix a typo in log writingAaro Koskinen1-1/+1
Fix a typo when registering HW RNG. Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2015-11-12ARM: OMAP2+: remove custom abort handler for t410Lucas Stach1-29/+0
This is not needed anymore. Handling a potentially pending imprecise external abort left behind by the bootloader is now done in a slightly safer way inside the common ARM startup code. With the recent changes to abort handling, this issue got fixed by 57df53808534 ("ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init"). Signed-off-by: Lucas Stach <[email protected]> [[email protected]: updated comments to describe what fixed the issue] Signed-off-by: Tony Lindgren <[email protected]>
2015-10-19ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM initTony Lindgren1-1/+8
Some omaps are producing imprecise external aborts because we are wrongly trying to init SRAM for device tree based booting. Only omap3 is still using the legacy SRAM code, so we need to make it omap3 specific. Otherwise we can get errors like this on at least dm814x: Unhandled fault: imprecise external abort (0xc06) at 0xc08b156c ... (omap_rev) from [<c08b12e0>] (omap_sram_init+0xf8/0x3e0) (omap_sram_init) from [<c08aca0c>] (omap_sdrc_init+0x10/0xb0) (omap_sdrc_init) from [<c08b581c>] (pdata_quirks_init+0x18/0x44) (pdata_quirks_init) from [<c08b5478>] (omap_generic_init+0x10/0x1c) (omap_generic_init) from [<c08a57e0>] (customize_machine+0x1c/0x40) (customize_machine) from [<c00098a4>] (do_one_initcall+0x80/0x1dc) (do_one_initcall) from [<c08a2ec4>] (kernel_init_freeable+0x218/0x2e8) (kernel_init_freeable) from [<c063a554>] (kernel_init+0x8/0xec) (kernel_init) from [<c000f890>] (ret_from_fork+0x14/0x24) Let's fix the issue by making sure omap_sdrc_init only gets called for omap3. To do that, we need to have compatible "ti,omap3" in the dts files. And let's also use "ti,omap3630" instead of "ti,omap36xx" like we're supposed to. Signed-off-by: Tony Lindgren <[email protected]>
2015-09-01Merge tag 'armsoc-dt' of ↵Linus Torvalds1-0/+157
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "Ladies and gentlemen, we proudly announce to you the latest branch of ARM device tree contents for the mainline kernel. Come and see, come and see! No less than twentythree thousand lines of additions! Just imagine the joy you will have of using your mainline kernel on newly supported hardware such as Rockchip Chromebooks, Freescale i.MX6UL boards or UniPhier hardware! For those of you feeling less adventurous, added hardware support on platforms such as TI DM814x and Gumstix Overo platforms might be more of your liking. We've got something for everyone here! Ahem. Cough. So, anyway... This is the usual large batch of DT updates. Lots and lots of smaller changes, some of the larger ones to point out are: - Rockchip veyron (Chromebook) support, as well as several other new boards - DRM support on Atmel AT91SAM9N12EK - USB additions on some Allwinner platforms - Mediatek MT6580 support - Freescale i.MX6UL support - cleanups for Renesas shmobile platforms - lots of added devices on LPC18xx - lots of added devices and boards on UniPhier There's also some dependent code added here, in particular some branches that are primarily merged through the clock tree" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (389 commits) ARM: tegra: Add gpio-ranges property ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114 ARM: tegra: Add Tegra124 PMU support ARM: tegra: jetson-tk1: Add GK20A GPU DT node ARM: tegra: venice2: Add GK20A GPU DT node ARM: tegra: Add IOMMU node to GK20A ARM: tegra: Add CPU regulator to the Jetson TK1 device tree ARM: tegra: Add entries for cpufreq on Tegra124 ARM: tegra: Enable the DFLL on the Jetson TK1 ARM: tegra: Add the DFLL to Tegra124 device tree ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller. ARM: dts: UniPhier: fix PPI interrupt CPU mask of timer nodes ARM: dts: rockchip: correct regulator power states for suspend ARM: dts: rockchip: correct regulator PM properties ARM: dts: vexpress: Use assigned-clock-parents for sp810 pinctrl: tegra: Only set the gpio range if needed arm: boot: dts: am4372: add ARM timers and SCU nodes ARM: dts: AM4372: Add the am4372-rtc compatible string ARM: shmobile: r8a7794 dtsi: Add CPG/MSTP Clock Domain ARM: shmobile: r8a7793 dtsi: Add CPG/MSTP Clock Domain ...
2015-07-23ARM: OMAP2+: Add custom abort handler for t410Tony Lindgren1-0/+29
Similar to commit fdf4850cb5b2 ("ARM: BCM5301X: workaround suppress fault"), let's add custom handling for the aborts on t410 that prevent booting: Unhandled fault: imprecise external abort (0xc06) at 0xee091fb0 pgd = ee4bc000 [ee091fb0] *pgd=ae00041e(bad) Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 Cc: Matthijs van Duin <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2015-07-21ARM: OMAP2+: omap3-pandora: add wifi supportGrazvydas Ignotas1-0/+101
Add wl1251 support via pdata-quirks as it's driver lacks DT support. MMC3 is marked disabled in DT so that MMC3 instance of hsmmc driver is probed using platform data with special card init callback. Signed-off-by: Grazvydas Ignotas <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2015-07-21ARM: OMAP2+: omap3-pandora: add backlight supportGrazvydas Ignotas1-0/+12
Add backlight support via pdata-quirks as it's driver lacks DT support. Signed-off-by: Grazvydas Ignotas <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2015-07-15ARM: OMAP2+: sparse: add missing static declarationSekhar Nori1-3/+3
Add missing static declaration for file local variables. This fixes sparse warnings of type: arch/arm/mach-omap2/omap_hwmod_81xx_data.c:491:26: warning: symbol 'dm81xx_alwon_l3_slow__gpmc' was not declared. Should it be static? Signed-off-by: Sekhar Nori <[email protected]> Signed-off-by: Paul Walmsley <[email protected]>
2015-07-14ARM: OMAP2+: Use pdata-quirks for wkup_m3 reset managementDave Gerlach1-0/+15
Use pdata-quirks to provide platform data required for reset management during boot and shutdown of the wkup_m3 processor on both the AM33xx and AM43xx SoCs. The WkupM3 remote processor is used to implement and achieve low-power functionality on the AM33xx & AM43xx SoCs. Signed-off-by: Suman Anna <[email protected]> Signed-off-by: Dave Gerlach <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2015-05-20ARM: OMAP3: Add support for configuring MMC pins as GPIO pinsTony Lindgren1-0/+22
Some devices are using the MMC1 pins 4..8 as GPIO pins, and in this case they need to be configured for 1.8V IO voltage if not done by the bootloader as otherwise some devices like smsc911x won't work properly. Let's also make sure this register is saved and restored for idle. Cc: Tim Nordell <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2015-03-24ARM: dts: add wl12xx/wl18xx bindingsEliad Peller1-74/+0
Replace all the pdata-quirks for setting wl12xx/wl18xx platform data with proper DT definitions. Signed-off-by: Eliad Peller <[email protected]> Acked-by: Javier Martinez Canillas <[email protected]> Acked-by: Enric Balletbo i Serra <[email protected]> Tested-by: Nikita Kiryanov <[email protected]> Tested-by: Tony Lindgren <[email protected]> Acked-by: Kalle Valo <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2015-03-24wl12xx: use frequency instead of enumerations for pdata clocksLuciano Coelho1-15/+14
Instead of defining an enumeration with the FW specific values for the different clock rates, use the actual frequency instead. Also add a boolean to specify whether the clock is XTAL or not. Change all board files to reflect this. Signed-off-by: Luciano Coelho <[email protected]> [Eliad - small fixes, update board file changes] Signed-off-by: Eliad Peller <[email protected]> Tested-by: Nikita Kiryanov <[email protected]> Acked-by: Kalle Valo <[email protected]> Acked-by: Sekhar Nori <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2015-03-19wlcore: set irq_trigger in board files instead of hiding behind a quirkLuciano Coelho1-0/+1
The platform_quirk element in the platform data was used to change the way the IRQ is triggered. When set, the EDGE_IRQ quirk would change the irqflags used and treat edge trigger differently from the rest. Instead of hiding this irq flag setting behind the quirk, have the board files set the irq_trigger explicitly. This will allow us to use standard irq DT definitions later on. Signed-off-by: Luciano Coelho <[email protected]> [Eliad - rebase, add irq_trigger field and pass it, update board file changes] Signed-off-by: Eliad Peller <[email protected]> Tested-by: Nikita Kiryanov <[email protected]> Acked-by: Kalle Valo <[email protected]> Acked-by: Sekhar Nori <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2015-03-06ARM: OMAP2+: Fix wl12xx on dm3730-evm with mainline u-bootTony Lindgren1-0/+1
I upgraded my u-boot and noticed that wl12xx stopped working. Turns out the kernel is not setting the quirk for the MMC2 copy clock while the eariler bootloader I had was setting it. Signed-off-by: Tony Lindgren <[email protected]>
2015-01-13ARM: OMAP3: Remove legacy support for am35xx-emacTony Lindgren1-1/+0
This is no longer needed now that 3517 is booting in device tree only mode. Signed-off-by: Tony Lindgren <[email protected]>
2014-11-28Merge tag 'omap-for-v3.19/dt-part2-updated' of ↵Arnd Bergmann1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "More dts changes for omaps to add support for new devices" from Tony Lindgren: - Add DCAN support am335x, am437x and dra7 - Add devices for sb-t3x computers - Add support for NovaTech OrionLXm - Add n900 battery and si4713 support * tag 'omap-for-v3.19/dt-part2-updated' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits) ARM: dts: am335x-evm: Add DCAN1 details ARM: dts: am33xx: Update DCAN nodes ARM: dts: am33xx: Add control module syscon node ARM: dts: am437x-gp: Add dcan support ARM: dts: am4372: Add DCAN nodes ARM: dts: am4372: Add control module syscon node ARM: dts: dra72-evm: Add CAN support ARM: dts: dra7-evm: Add CAN support ARM: dts: DRA7: Add DCAN nodes ARM: dts: dra7: Add syscon regmap for CORE CONTROL area ARM: dts: sbc-t3x30: add audio support ARM: dts: sbc-t3x: add TV out display alias ARM: dts: cm-t3x: add TV out support ARM: dts: cm-t3x: add I2C1 pinmux ARM: dts: AM43xx: add tscadc DT entries for am437x-evm and am43x-epos-evm ARM: dts: cm-t3x30: add keypad support ARM: dts: sb-t35: add EEPROM support ARM: dts: cm-t3x: add EEPROM support ARM: OMAP2+: remove cm-t3x touchscreen pdata quirk ARM: dts: cm-t3x: add ADS7846 touchscreen support ... Signed-off-by: Arnd Bergmann <[email protected]>
2014-11-21ARM: OMAP2+: remove cm-t3x touchscreen pdata quirkDmitry Lifshitz1-3/+0
Remove ADS7846 touchscreen pdata quirk for CM-T3x CoMs Signed-off-by: Dmitry Lifshitz <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2014-11-20Merge tag 'omap-for-v3.19/dt-part1' of ↵Arnd Bergmann1-2/+34
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Device tree related changes for omaps" from Tony Lindgren: - Fix currently harmless but wrong sizes for various GPMC connected devices - Set up timings for several GPMC connected devices to get rid of bootloader dependencies in later patches - Enable various drivers for dra7xx - Prepare Igep boards to support new variants - Add intial support for BeagleBoard-X15 * tag 'omap-for-v3.19/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (37 commits) ARM: dts: DRA7: Add aliases for all serial ports ARM: dts: Add am57xx-beagle-x15 ARM: OMAP2+: igep00x0: Add pdata-quirks for the btwilink device. ARM: dts: omap3-igep00x0: Remove i2c2 node. ARM: dts: omap3-igep0020-rev-f: Support IGEPv2 Rev. F ARM: dts: omap3-igep0020-common: Introduce igep0020 common dtsi file. ARM: dts: omap3-igep0030-rev-g: Support IGEP COM MODULE Rev. G ARM: dts: omap3-igep0030-common: Introduce igep0030 common dtsi file. ARM: dts: omap3-igep00x0: Move outside common file the on board Wifi module. ARM: dts: omap3-igep0020: Specify IGEPv2 revision in device tree. ARM: dts: omap3-igep0030: Specify IGEP COM revision in device tree. ARM: dts: omap3-igep00x0: Move NAND configuration to a common place. ARM: dts: omap3-igep00x0: Fix UART2 pins that aren't common. ARM: dts: dra7: add labels to DWC3 nodes ARM: dts: dra72x-evm: Enable CPSW and MDIO ARM: dts: dra7-evm: Keep all VDD rails always-on ARM: dts: dra72-evm: Add MMC nodes ARM: dts: dra72-evm: Add power button node ARM: dts: dra72-evm: Provide explicit pinmux for TPS PMIC ARM: dts: dra72-evm: Add regulator information to USB2 PHYs ... Signed-off-by: Arnd Bergmann <[email protected]>
2014-11-12ARM: OMAP2+: igep00x0: Add pdata-quirks for the btwilink device.Enric Balletbo i Serra1-2/+34
Add btwilink device for IGEPv2 Rev. F and IGEP COM MODULE Rev. G. Signed-off-by: Enric Balletbo i Serra <[email protected]> Acked-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2014-10-31net: smc91x: Fix gpios for device tree based bootingTony Lindgren1-3/+0
With legacy booting, the platform init code was taking care of the configuring of GPIOs. With device tree based booting, things may or may not work depending what bootloader has configured or if the legacy platform code gets called. Let's add support for the pwrdn and reset GPIOs to the smc91x driver to fix the issues of smc91x not working properly when booted in device tree mode. And let's change n900 to use these settings as some versions of the bootloader do not configure things properly causing errors. Reported-by: Kevin Hilman <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-10-08Merge tag 'drivers-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. Most of the new code is for the Keystone Navigator driver, which is new base support that is going to be needed for their hardware accelerated network driver and other units. Most of the commits are for moving old code around from at91 and omap for things that are done in device drivers nowadays. - at91: move reset, poweroff, memory and clocksource code into drivers directories - socfpga: add edac driver (through arm-soc, as requested by Boris) - omap: move omap-intc code to drivers/irqchip - sunxi: added an RTC driver for sun6i - omap: mailbox driver related changes - keystone: support for the "Navigator" component - versatile: new reboot, led and soc drivers" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits) bus: arm-ccn: Fix spurious warning message leds: add device tree bindings for register bit LEDs soc: add driver for the ARM RealView power: reset: driver for the Versatile syscon reboot leds: add a driver for syscon-based LEDs drivers/soc: ti: fix build break with modules MAINTAINERS: Add Keystone Multicore Navigator drivers entry soc: ti: add Keystone Navigator DMA support Documentation: dt: soc: add Keystone Navigator DMA bindings soc: ti: add Keystone Navigator QMSS driver Documentation: dt: soc: add Keystone Navigator QMSS bindings rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc rtc: sun6i: Add sun6i RTC driver irqchip: omap-intc: remove unnecessary comments irqchip: omap-intc: correct maximum number or MIR registers irqchip: omap-intc: enable TURBO idle mode irqchip: omap-intc: enable IP protection irqchip: omap-intc: remove unnecesary of_address_to_resource() call irqchip: omap-intc: comment style cleanup irqchip: omap-intc: minor improvement to omap_irq_pending() ...
2014-10-08Merge tag 'dt-for-linus' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Arnd Bergmann: "As usual, this is the largest branch, though this time a little under half of the total changes with 307 individual non-merge changesets. The largest changes are the addition of new machines, in particular the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support for the old i.MX1 platform. Other changes include - at91: various sam9 and sama5 updates - exynos: much extended Peach Pi/Pit (Chromebook 2) support - keystone: new peripherals - meson: added DT for meson6 SoC - mvebu: new device support for Armada 370/375 - qcom: improved support for IPQ8064 and MSM8x60 - rockchip: much improved support for rk3288 - shmobile: lots of updates all over the place - sunxi: dts license change - sunxi: more a23 device support - vexpress: CLCD DT description" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits) ARM: DTS: meson: update DTSI to add watchdog node ARM: dts: keystone-k2l: fix mdio io start address ARM: dts: keystone-k2e: fix mdio io start address ARM: dts: keystone-k2e: update usb1 node for dma properties ARM: dts: keystone: fix io range for usb_phy0 Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt" Revert "ARM: dts: hix5hd2: add wdg node" ARM: dts: add rk3288 i2s controller ARM: vexpress: Add CLCD Device Tree properties ARM: bcm2835: add I2S pinctrl to device tree ARM: meson: documentation: add bindings documentation ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS ARM: dts: mt6589: Change compatible string for GIC ARM: dts: mediatek: Add compatible property for aquaris5 ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk ARM: dts: mt6589: Fix typo in GIC unit address ARM: dts: Build dtb for Mediatek board ARM: dts: keystone: fix bindings for pcie and usb clock nodes ARM: dts: keystone: k2l: Fix chip selects for SPI devices ARM: dts: keystone: add dsp gpio controllers nodes ...
2014-10-08Merge tag 'soc-for-linus' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support. Among the things new for this release are: - at91: Added support for the new SAMA5D4 SoC, following the earlier SAMA5D3 - bcm: Added support for BCM63XX family of DSL SoCs - hisi: Added support for HiP04 server-class SoC - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC Noteworthy changes to existing SoC support are: - imx: convert i.MX1 to device tree - omap: lots of power management work - omap: base support to enable moving to standard UART driver - shmobile: lots of progress for multiplatform support, still ongoing" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits) ARM: hisi: depend on ARCH_MULTI_V7 CNS3xxx: Fix debug UART. ARM: at91: fix nommu build regression ARM: meson: add basic support for MesonX SoCs ARM: meson: debug: add debug UART for earlyprintk support irq: Export handle_fasteoi_irq ARM: mediatek: Add earlyprintk support for mt6589 ARM: hisi: Fix platmcpm compilation when ARMv6 is selected ARM: debug: fix alphanumerical order on debug uarts ARM: at91: document Atmel SMART compatibles ARM: at91: add sama5d4 support to sama5_defconfig ARM: at91: dt: add device tree file for SAMA5D4ek board ARM: at91: dt: add device tree file for SAMA5D4 SoC ARM: at91: SAMA5D4 SoC detection code and low level routines ARM: at91: introduce basic SAMA5D4 support clk: at91: add a driver for the h32mx clock ARM: pxa3xx: provide specific platform_devices for all ssp ports ARM: pxa: ssp: provide platform_device_id for PXA3xx ARM: OMAP4+: Remove static iotable mappings for SRAM ARM: OMAP4+: Move SRAM data to DT ...
Powered by cgit, Gruvboxed by Blaster4385.