aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-mx5
AgeCommit message (Collapse)AuthorFilesLines
2011-03-07ARM: imx5x: clean up ARCH_MX5XRichard Zhao1-1/+2
Move to SOC_SOC_IMX5X. Leave only places which prevent multi-soc using ARCH_MX5X. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceiversSascha Hauer2-8/+8
The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops, both are only present if CONFIG_USB_ULPI is set. To remove the need of ifdefs in the board code introduce a imx_otg_ulpi_create functions which expands to a static inline function if compiled without ulpi. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM i.MX: Move gpio initialization to SoC specific filesSascha Hauer1-2/+11
This saves us from soc level dispatching in generic files Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx5/mx53_evk: Fix IOMUX for UART3Fabio Estevam1-3/+1
On mx53_evk board only RX/TX pins are used on UART3. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx5/mx53_smd: Fix IOMUX for UART2Fabio Estevam1-3/+1
On mx53_smd board only RX/TX pins are used on UART2. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx53_smd: Add I2C supportFabio Estevam2-0/+9
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx53_loco: add esdhc device supportRichard Zhu2-0/+3
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx51/53: add sdhc3/4 clockRichard Zhu2-1/+146
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-01cpuimx51sd: mcp2515 supports up to 10MHz SPI clockEric Bénard1-1/+1
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-01cpuimx51sd: fix tsc2007Eric Bénard1-7/+1
- wrong MUX was set before for IRQ - get_pendown_state is no more needed Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-01cpuimx51sd: add cpufreq supportEric Bénard1-0/+5
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-21ARM: imx53: correct Silicon Revision definition following fuse mapRichard Zhao1-3/+8
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: imx53_loco: add i2c device supportRichard Zhao2-0/+7
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: imx53_loco: add all pad configure.Richard Zhao1-0/+137
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: mach-mx5: Add watchdog support for MX53 based boardsFabio Estevam4-0/+6
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: mx5: Add watchdog support for MX53Fabio Estevam3-1/+7
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18mx51: add support for efika smartbookArnaud Patard (Rtp)3-0/+291
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18efika: enable cpufreqArnaud Patard (Rtp)1-0/+5
Enable cpufreq on Genesi efika platforms Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18efikamx: add mc13892 support / implement power offArnaud Patard (Rtp)2-0/+407
This patch declares regulators for the efikamx. Use it also to power off the efikamx. Unfortunately, on the efikamx to2 boards, this doesn't work but they allow to power off by setting GPIO 4 13 to high level instead of powering off through the mc13892. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18efikamx: add usb h1 supportArnaud Patard (Rtp)4-4/+122
Now that usb has been fixed, we can enable usb h1 on efikamx Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18Introduce EFIKA_COMMONArnaud Patard (Rtp)5-128/+191
The Genesi EFIKA MX and EFIKA Smartbook are sharing a lot of things so it makes sense to create a common file for both devices and a specific file for each. No functionnal change except dropping uart 1 & 2. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11ARM: mx3+mx5: rename mxc_board_init to ${machine}_initUwe Kleine-König3-15/+15
mxc_board_init is too generic to be useful. Additionally change some mxc_timer to ${machine}_timer, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11ARM i.MX ehci: do ehci init in board specific functionsSascha Hauer4-14/+31
The mxc-ehci driver calls SoC specific phy initialization right after calling board specific initialization. To offer greater flexibility for boards to setup the phy and to get rid of some unnecessary flags in platform data this patch lets the boards call the SoC specific phy initialization and remove it from the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-11ARM i.MX ehci: factor out soc specific functionsSascha Hauer2-1/+157
Currently we have a mxc_initialize_usb_hw which is called on every i.MX SoC. This function dispatches the different SoC types, which is quite ugly. This patch moves the SoC specific USB initialization to their correspondive mach directories. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-10ARM: mx5: use .init_early to initialize cpu type, reset address and iomuxerUwe Kleine-König11-12/+33
This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mx5/board-mx53_evk.c: Make UART1 functionalFabio Estevam1-3/+1
Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mx5/board-mx53_smd.c: Make UART1 functionalFabio Estevam1-3/+1
Fix UART1 IOMUX settings and configure UART1 to work with only RX/TX pins. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mach-mx5/board-mx53_loco: Remove unused UARTsFabio Estevam1-23/+1
On mx53_loco only UART1 is used and its signals go to connector J16. Remove UART2 and UART3 as they are not used on this board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mach-mx5/board-mx53_loco: Make UART1 functionalFabio Estevam1-3/+1
Fix IOMUX settings for UART1 and make UART1 functional. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-01ARM: mach-mx5: Fix build for mx53_loco and mx53_smdFabio Estevam2-28/+29
Commit 816ad74 (ARM: i.MX53: Add full iomux support for mx53) renamed some of the pad names. Make the changes accordingly so that mx53_loco and mx53_cmd can build without errors. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX51 efikamx: remove unnecessary CONFIG_SERIAL_IMX ifdefsSascha Hauer1-14/+3
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX51 cpuimx51: remove unnecessary CONFIG_SERIAL_8250 ifdefsSascha Hauer1-4/+0
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX51 mx51-3ds: remove unnecessary CONFIG_KEYBOARD_IMX ifdefsSascha Hauer1-12/+1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX51 mx51 babbage: remove unnecessary CONFIG_SERIAL_IMX ifdefsSascha Hauer1-14/+5
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-27ARM i.MX51 mx51 3ds: remove unnecessary CONFIG_SERIAL_IMX ifdefsSascha Hauer1-14/+4
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-24ARM: mx5/mx51_3ds: Add watchdog supportDaiane Angolini2-0/+2
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-21ARM: mx5: Use dummy clock for the keypadFabio Estevam1-5/+1
Reuse dummy_clk for the imx-keypad device instead of using a dedicated kpp_clk. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-21ARM: i.MX53: Add full iomux support for mx53Dinh Nguyen1-18/+18
This iomux file contains all the available pins that are iomux capable. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-19arm: mx50_rdp: add i2c bus supportRichard Zhao2-0/+10
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-19arm: mx50_rdp: add fec supportRichard Zhao3-2/+26
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-19ARM i.MX50: Rename devices-mx50.hJason Liu2-1/+1
There are devices-imx51.h and devices-imx53.h under arch/arm/mach-mx5 directory. So, had better rename devices-mx50.h to devices-imx50.h to follow the same naming convention with imx51 and imx53 part. Signed-off-by: Jason Liu <r64343@freescale.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-14Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King12-28/+364
devel-stable
2011-01-13mx51: add support for pwmArnaud Patard (Rtp)1-0/+7
This patch is adding support for pwm1 and pwm2 devices found on mx51. [ this patch has been tested with pwm-backlight driver ] Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13Fix pwm-related build failureArnaud Patard (Rtp)1-2/+2
Commit 076762aa52de48688f6e1b6999fe58d736479f37 is adding a macro whis is calling imx_add_mxc_pwm() but gives it 2 parameters while it's taking only one parameters. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13ARM i.MX53 enable LOCO board bootupYong Shen3-0/+120
1. Add Kconfig and Makefile entries 2. Add board definition 3. enable uart and fec for LOCO board Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13ARM i.MX53 enable SMD board bootupYong Shen3-0/+119
1. Add Kconfig and Makefile entries 2. Add board definition 3. enable uart and fec for SMD board Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13ARM: i.MX53 EVK: add spi nor deviceYong Shen1-0/+15
add spi board information for spi nor device Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-13ARM: i.MX53 EVK: add ecspi IOMUX settingYong Shen1-2/+10
add ecspi IOMUX setting, also fix a bug of chip select pin order Signed-off-by: Yong Shen <yong.shen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12ARM: mx5: dynamically allocate imx-keypad devicesFabio Estevam7-27/+11
Add support for dynamical allocation of imx-keypad on mx5 platform. After moving to dynamically registration of the keypad, the keypad clock name needs to change accordingly. The reason is that the original mx5 keypad platform_device id was 0, now we use id=-1 as per arch/arm/plat-mxc/devices/platform-imx-keypad.c. Tested keypad successfully on a MX51_3DS board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-01-12ARM: mx5: dynamically allocate pwm devicesFabio Estevam1-0/+4
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Powered by cgit, Gruvboxed by Blaster4385.