| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit
architectural register (ZT0, for the look-up table feature) that
Linux needs to save/restore
- Include TPIDR2 in the signal context and add the corresponding
kselftests
- Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI
support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG
(ARM CMN) at probe time
- Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64
- Permit EFI boot with MMU and caches on. Instead of cleaning the
entire loaded kernel image to the PoC and disabling the MMU and
caches before branching to the kernel bare metal entry point, leave
the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of
all of system RAM to populate the initial page tables
- Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64
kernel (the arm32 kernel only defines the values)
- Harden the arm64 shadow call stack pointer handling: stash the shadow
stack pointer in the task struct on interrupt, load it directly from
this structure
- Signal handling cleanups to remove redundant validation of size
information and avoid reading the same data from userspace twice
- Refactor the hwcap macros to make use of the automatically generated
ID registers. It should make new hwcaps writing less error prone
- Further arm64 sysreg conversion and some fixes
- arm64 kselftest fixes and improvements
- Pointer authentication cleanups: don't sign leaf functions, unify
asm-arch manipulation
- Pseudo-NMI code generation optimisations
- Minor fixes for SME and TPIDR2 handling
- Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable,
replace strtobool() to kstrtobool() in the cpufeature.c code, apply
dynamic shadow call stack in two passes, intercept pfn changes in
set_pte_at() without the required break-before-make sequence, attempt
to dump all instructions on unhandled kernel faults
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits)
arm64: fix .idmap.text assertion for large kernels
kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests
kselftest/arm64: Copy whole EXTRA context
arm64: kprobes: Drop ID map text from kprobes blacklist
perf: arm_spe: Print the version of SPE detected
perf: arm_spe: Add support for SPEv1.2 inverted event filtering
perf: Add perf_event_attr::config3
arm64/sme: Fix __finalise_el2 SMEver check
drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable
arm64/signal: Only read new data when parsing the ZT context
arm64/signal: Only read new data when parsing the ZA context
arm64/signal: Only read new data when parsing the SVE context
arm64/signal: Avoid rereading context frame sizes
arm64/signal: Make interface for restore_fpsimd_context() consistent
arm64/signal: Remove redundant size validation from parse_user_sigframe()
arm64/signal: Don't redundantly verify FPSIMD magic
arm64/cpufeature: Use helper macros to specify hwcaps
arm64/cpufeature: Always use symbolic name for feature value in hwcaps
arm64/sysreg: Initial unsigned annotations for ID registers
arm64/sysreg: Initial annotation of signed ID registers
...
|
|
Pull ARM udpates from Russell King:
- Improve Kconfig help text for Cortex A8 and Cortex A9 errata
- Kconfig spelling and grammar fixes
- Allow kernel-mode VFP/Neon in softirq context
- Use Neon in softirq context
- Implement AES-CTR/GHASH version of GCM
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer
ARM: 9288/1: Kconfigs: fix spelling & grammar
ARM: 9286/1: crypto: Implement fused AES-CTR/GHASH version of GCM
ARM: 9285/1: remove meaningless arch/arm/mach-rda/Makefile
ARM: 9283/1: permit non-nested kernel mode NEON in softirq context
ARM: 9282/1: vfp: Manipulate task VFP state with softirqs disabled
ARM: 9281/1: improve Cortex A8/A9 errata help text
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve the scalability of the CFS bandwidth unthrottling logic with
large number of CPUs.
- Fix & rework various cpuidle routines, simplify interaction with the
generic scheduler code. Add __cpuidle methods as noinstr to objtool's
noinstr detection and fix boatloads of cpuidle bugs & quirks.
- Add new ABI: introduce MEMBARRIER_CMD_GET_REGISTRATIONS, to query
previously issued registrations.
- Limit scheduler slice duration to the sysctl_sched_latency period, to
improve scheduling granularity with a large number of SCHED_IDLE
tasks.
- Debuggability enhancement on sys_exit(): warn about disabled IRQs,
but also enable them to prevent a cascade of followup problems and
repeat warnings.
- Fix the rescheduling logic in prio_changed_dl().
- Micro-optimize cpufreq and sched-util methods.
- Micro-optimize ttwu_runnable()
- Micro-optimize the idle-scanning in update_numa_stats(),
select_idle_capacity() and steal_cookie_task().
- Update the RSEQ code & self-tests
- Constify various scheduler methods
- Remove unused methods
- Refine __init tags
- Documentation updates
- Misc other cleanups, fixes
* tag 'sched-core-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (110 commits)
sched/rt: pick_next_rt_entity(): check list_entry
sched/deadline: Add more reschedule cases to prio_changed_dl()
sched/fair: sanitize vruntime of entity being placed
sched/fair: Remove capacity inversion detection
sched/fair: unlink misfit task from cpu overutilized
objtool: mem*() are not uaccess safe
cpuidle: Fix poll_idle() noinstr annotation
sched/clock: Make local_clock() noinstr
sched/clock/x86: Mark sched_clock() noinstr
x86/pvclock: Improve atomic update of last_value in pvclock_clocksource_read()
x86/atomics: Always inline arch_atomic64*()
cpuidle: tracing, preempt: Squash _rcuidle tracing
cpuidle: tracing: Warn about !rcu_is_watching()
cpuidle: lib/bug: Disable rcu_is_watching() during WARN/BUG
cpuidle: drivers: firmware: psci: Dont instrument suspend code
KVM: selftests: Fix build of rseq test
exit: Detect and fix irq disabled state in oops
cpuidle, arm64: Fix the ARM64 cpuidle logic
cpuidle: mvebu: Fix duplicate flags assignment
sched/fair: Limit sched slice duration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC boardfile updates from Arnd Bergmann
"Unused boardfile removal for 6.3
This is a follow-up to the deprecation of most of the old-style board
files that was merged in linux-6.0, removing them for good.
This branch is almost exclusively dead code removal based on those
annotations. Some device driver removals went through separate
subsystem trees, but the majority is in the same branch, in order to
better handle dependencies between the patches and avoid breaking
bisection.
Unfortunately that leads to merge conflicts against other changes in
the subsystem trees, but they should all be trivial to resolve by
removing the files.
See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
description of which machines were marked unused and are now removed.
The only removals that got postponed are Terastation WXL (mv78xx0) and
Jornada720 (StrongARM1100), which turned out to still have potential
users"
* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
mmc: omap: drop TPS65010 dependency
ARM: pxa: restore mfp-pxa320.h
usb: ohci-omap: avoid unused-variable warning
ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
ARM: s3c: remove obsolete s3c-cpu-freq header
MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
ARM: remove CONFIG_UNUSED_BOARD_FILES
mfd: remove htc-pasic3 driver
w1: remove ds1wm driver
usb: remove ohci-tmio driver
fbdev: remove w100fb driver
fbdev: remove tmiofb driver
mmc: remove tmio_mmc driver
mfd: remove ucb1400 support
mfd: remove toshiba tmio drivers
rtc: remove v3020 driver
power: remove pda_power supply driver
ASoC: pxa: remove unused board support
pcmcia: remove unused pxa/sa1100 drivers
...
|
|
Patch series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM", v2.
Every architecture that supports FLATMEM memory model defines its own
version of pfn_valid() that essentially compares a pfn to max_mapnr.
Use mips/powerpc version implemented as static inline as a generic
implementation of pfn_valid() and drop its per-architecture definitions
This patch (of 4):
Makes it consistent with other architectures and allows for generic
definition of pfn_valid() in asm-generic/memory_model.h with clear
override in arch/arm/include/asm/page.h
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport (IBM) <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: WANG Xuerui <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
We're masking with the number of type bits instead of the type mask, which
is obviously wrong.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 20aae9eff5ac ("arm/mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE")
Signed-off-by: David Hildenbrand <[email protected]>
Reported-by: Mark Brown <[email protected]>
Tested-by: Mark Brown <[email protected]>
Cc: Russell King (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add the generic plumbing to detect whether or not the runtime code
regions were constructed with BTI/IBT landing pads by the firmware,
permitting the OS to enable enforcement when mapping these regions into
the OS's address space.
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
|
|
__HAVE_ARCH_PTE_SWP_EXCLUSIVE is now supported by all architectures that
support swp PTEs, so let's drop it.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Let's support __HAVE_ARCH_PTE_SWP_EXCLUSIVE by stealing one bit from the
offset. This reduces the maximum swap space per file to 64 GiB (was 128
GiB).
While at it drop the PTE_TYPE_FAULT from __swp_entry_to_pte() which is
defined to be 0 and is rather confusing because we should be dealing with
"Linux PTEs" not "hardware PTEs". Also, properly mask the type in
__swp_entry().
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: David Hildenbrand <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When Priority Mask Hint Enable (PMHE) == 0b1, the GIC may use the PMR
value to determine whether to signal an IRQ to a PE, and consequently
after a change to the PMR value, a DSB SY may be required to ensure that
interrupts are signalled to a CPU in finite time. When PMHE == 0b0,
interrupts are always signalled to the relevant PE, and all masking
occurs locally, without requiring a DSB SY.
Since commit:
f226650494c6aa87 ("arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clear")
... we handle this dynamically: in most cases a static key is used to
determine whether to issue a DSB SY, but the entry code must read from
ICC_CTLR_EL1 as static keys aren't accessible from plain assembly.
It would be much nicer to use an alternative instruction sequence for
the DSB, as this would avoid the need to read from ICC_CTLR_EL1 in the
entry code, and for most other code this will result in simpler code
generation with fewer instructions and fewer branches.
This patch adds a new ARM64_HAS_GIC_PRIO_RELAXED_SYNC cpucap which is
only set when ICC_CTLR_EL1.PMHE == 0b0 (and GIC priority masking is in
use). This allows us to replace the existing users of the
`gic_pmr_sync` static key with alternative sequences which default to a
DSB SY and are relaxed to a NOP when PMHE is not in use.
The entry assembly management of the PMR is slightly restructured to use
a branch (rather than multiple NOPs) when priority masking is not in
use. This is more in keeping with other alternatives in the entry
assembly, and permits the use of a separate alternatives for the
PMHE-dependent DSB SY (and removal of the conditional branch this
currently requires). For consistency I've adjusted both the save and
restore paths.
According to bloat-o-meter, when building defconfig +
CONFIG_ARM64_PSEUDO_NMI=y this shrinks the kernel text by ~4KiB:
| add/remove: 4/2 grow/shrink: 42/310 up/down: 332/-5032 (-4700)
The resulting vmlinux is ~66KiB smaller, though the resulting Image size
is unchanged due to padding and alignment:
| [mark@lakrids:~/src/linux]% ls -al vmlinux-*
| -rwxr-xr-x 1 mark mark 137508344 Jan 17 14:11 vmlinux-after
| -rwxr-xr-x 1 mark mark 137575440 Jan 17 13:49 vmlinux-before
| [mark@lakrids:~/src/linux]% ls -al Image-*
| -rw-r--r-- 1 mark mark 38777344 Jan 17 14:11 Image-after
| -rw-r--r-- 1 mark mark 38777344 Jan 17 13:49 Image-before
Prior to this patch we did not verify the state of ICC_CTLR_EL1.PMHE on
secondary CPUs. As of this patch this is verified by the cpufeature code
when using GIC priority masking (i.e. when using pseudo-NMIs).
Note that since commit:
7e3a57fa6ca831fa ("arm64: Document ICC_CTLR_EL3.PMHE setting requirements")
... Documentation/arm64/booting.rst specifies:
| - ICC_CTLR_EL3.PMHE (bit 6) must be set to the same value across
| all CPUs the kernel is executing on, and must stay constant
| for the lifetime of the kernel.
... so that should not adversely affect any compliant systems, and as
we'll only check for the absense of PMHE when using pseudo-NMIs, this
will only fire when such mismatch will adversely affect the system.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Marc Zyngier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Pick up fixes before merging another batch of cpuidle updates.
Signed-off-by: Ingo Molnar <[email protected]>
|
|
net/checksum.h pulls in linux/uaccess.h which is large.
In the x86 header the include seems to not be needed at all.
ARM on the other hand does not include uaccess.h, even tho
it calls access_ok().
In the generic implementation guard the include of linux/uaccess.h
with the same condition as the code that needs it.
With this change pre-processed net/checksum.h shrinks on x86
from 30616 lines to just 1193.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
semihost.h
Move smh_putc() variants in respective arch/*/include/asm/semihost.h,
in preparation to add RISC-V support.
Signed-off-by: Bin Meng <[email protected]>
Tested-by: Sergey Matyukevich <[email protected]>
Acked-by: Palmer Dabbelt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
similar symbols that are no longer available with the platform gone,
though the drivers themselves are still used on newer platforms,
so remove these hacks.
Acked-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Acked-by: Daniel Lezcano <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Idle code is very like entry code in that RCU isn't available. As
such, add a little validation.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Tested-by: Tony Lindgren <[email protected]>
Tested-by: Ulf Hansson <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Acked-by: Frederic Weisbecker <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
We currently only permit kernel mode NEON in process context, to avoid
the need to preserve/restore the NEON register file when taking an
exception while running in the kernel.
Like we did on arm64, we can relax this restriction substantially, by
permitting kernel mode NEON from softirq context, while ensuring that
softirq processing is disabled when the NEON is being used in task
context. This guarantees that only NEON context belonging to user space
needs to be preserved and restored, which is already taken care of.
This is especially relevant for network encryption, where incoming
frames are typically handled in softirq context, and deferring software
decryption to a kernel thread or falling back to C code are both
undesirable from a performance PoV.
Tested-by: Martin Willi <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
In a subsequent patch, we will relax the kernel mode NEON policy, and
permit kernel mode NEON to be used not only from task context, as is
permitted today, but also from softirq context.
Given that softirqs may trigger over the back of any IRQ unless they are
explicitly disabled, we need to address the resulting races in the VFP
state handling, by disabling softirq processing in two distinct but
related cases:
- kernel mode NEON will leave the FPU disabled after it completes, so
any kernel code sequence that enables the FPU and subsequently accesses
its registers needs to disable softirqs until it completes;
- kernel_neon_begin() will preserve the userland VFP state in memory,
and if it interrupts the ordinary VFP state preserve sequence, the
latter will resume execution with the VFP registers corrupted, and
happily continue saving them to memory.
Given that disabling softirqs also disables preemption, we can replace
the existing preempt_disable/enable occurrences in the VFP state
handling asm code with new macros that dis/enable softirqs instead.
In the VFP state handling C code, add local_bh_disable/enable() calls
in those places where the VFP state is preserved.
One thing to keep in mind is that, once we allow NEON use in softirq
context, the result of any such interruption is that the FPEXC_EN bit in
the FPEXC register will be cleared, and vfp_current_hw_state[cpu] will
be NULL. This means that any sequence that [conditionally] clears
FPEXC_EN and/or sets vfp_current_hw_state[cpu] to NULL does not need to
run with softirqs disabled, as the result will be the same. Furthermore,
the handling of THREAD_NOTIFY_SWITCH is guaranteed to run with IRQs
disabled, and so it does not need protection from softirq interruptions
either.
Tested-by: Martin Willi <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
We want to ensure that the mask related to calling do_work_pending()
is within the first 16 bits. Move bits unrelated to that outside of
that range, to avoid spuriously calling do_work_pending() when we don't
need to.
Cc: [email protected]
Fixes: 32d59773da38 ("arm: add support for TIF_NOTIFY_SIGNAL")
Reported-and-tested-by: Hui Tang <[email protected]>
Suggested-by: Russell King (Oracle) <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]/
Signed-off-by: Jens Axboe <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have a new GPIO multiplexer driver, bunch of driver updates and
refactoring in the core GPIO library.
GPIO core:
- teach gpiolib to work with software nodes for HW description
- remove ARCH_NR_GPIOS treewide as we no longer impose any limit on
the number of GPIOS since the allocation became entirely dynamic
- add support for HW quirks for Cirrus CS42L56 codec, Marvell NFC
controller, Freescale PCIe and Ethernet controller, Himax LCDs and
Mediatek mt2701
- refactor OF quirk code
- some general refactoring of the OF and ACPI code, adding new
helpers, minor tweaks and fixes, making fwnode usage consistent
etc.
GPIO uAPI:
- fix an issue where the user-space can trigger a NULL-pointer
dereference in the kernel by opening a device file, forcing a
driver unbind and then calling one of the syscalls on the
associated file descriptor
New drivers:
- add gpio-latch: a new GPIO multiplexer based on latches connected
to other GPIOs
Driver updates:
- convert i2c GPIO expanders to using .probe_new()
- drop the gpio-sta2x11 driver
- factor out common code for the ACCES IDIO-16 family of controllers
and use this new library wherever applicable in drivers
- add DT support to gpio-hisi
- allow building gpio-davinci as a module and increase its maxItems
property
- add support for a new model to gpio-pca9570
- other minor changes to various drivers"
* tag 'gpio-updates-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (66 commits)
gpio: sim: set a limit on the number of GPIOs
gpiolib: protect the GPIO device against being dropped while in use by user-space
gpiolib: cdev: fix NULL-pointer dereferences
gpiolib: Provide to_gpio_device() helper
gpiolib: Unify access to the device properties
gpio: Do not include <linux/kernel.h> when not really needed.
gpio: pcf857x: Convert to i2c's .probe_new()
gpio: pca953x: Convert to i2c's .probe_new()
gpio: max732x: Convert to i2c's .probe_new()
dt-bindings: gpio: gpio-davinci: Increase maxItems in gpio-line-names
gpiolib: ensure that fwnode is properly set
gpio: sl28cpld: Replace irqchip mask_invert with unmask_base
gpiolib: of: Use correct fwnode for DT-probed chips
gpiolib: of: Drop redundant check in of_mm_gpiochip_remove()
gpiolib: of: Prepare of_mm_gpiochip_add_data() for fwnode
gpiolib: add support for software nodes
gpiolib: consolidate GPIO lookups
gpiolib: acpi: avoid leaking ACPI details into upper gpiolib layers
gpiolib: acpi: teach acpi_find_gpio() to handle data-only nodes
gpiolib: acpi: change acpi_find_gpio() to accept firmware node
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- More userfaultfs work from Peter Xu
- Several convert-to-folios series from Sidhartha Kumar and Huang Ying
- Some filemap cleanups from Vishal Moola
- David Hildenbrand added the ability to selftest anon memory COW
handling
- Some cpuset simplifications from Liu Shixin
- Addition of vmalloc tracing support by Uladzislau Rezki
- Some pagecache folioifications and simplifications from Matthew
Wilcox
- A pagemap cleanup from Kefeng Wang: we have VM_ACCESS_FLAGS, so use
it
- Miguel Ojeda contributed some cleanups for our use of the
__no_sanitize_thread__ gcc keyword.
This series should have been in the non-MM tree, my bad
- Naoya Horiguchi improved the interaction between memory poisoning and
memory section removal for huge pages
- DAMON cleanups and tuneups from SeongJae Park
- Tony Luck fixed the handling of COW faults against poisoned pages
- Peter Xu utilized the PTE marker code for handling swapin errors
- Hugh Dickins reworked compound page mapcount handling, simplifying it
and making it more efficient
- Removal of the autonuma savedwrite infrastructure from Nadav Amit and
David Hildenbrand
- zram support for multiple compression streams from Sergey Senozhatsky
- David Hildenbrand reworked the GUP code's R/O long-term pinning so
that drivers no longer need to use the FOLL_FORCE workaround which
didn't work very well anyway
- Mel Gorman altered the page allocator so that local IRQs can remnain
enabled during per-cpu page allocations
- Vishal Moola removed the try_to_release_page() wrapper
- Stefan Roesch added some per-BDI sysfs tunables which are used to
prevent network block devices from dirtying excessive amounts of
pagecache
- David Hildenbrand did some cleanup and repair work on KSM COW
breaking
- Nhat Pham and Johannes Weiner have implemented writeback in zswap's
zsmalloc backend
- Brian Foster has fixed a longstanding corner-case oddity in
file[map]_write_and_wait_range()
- sparse-vmemmap changes for MIPS, LoongArch and NIOS2 from Feiyang
Chen
- Shiyang Ruan has done some work on fsdax, to make its reflink mode
work better under xfstests. Better, but still not perfect
- Christoph Hellwig has removed the .writepage() method from several
filesystems. They only need .writepages()
- Yosry Ahmed wrote a series which fixes the memcg reclaim target
beancounting
- David Hildenbrand has fixed some of our MM selftests for 32-bit
machines
- Many singleton patches, as usual
* tag 'mm-stable-2022-12-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (313 commits)
mm/hugetlb: set head flag before setting compound_order in __prep_compound_gigantic_folio
mm: mmu_gather: allow more than one batch of delayed rmaps
mm: fix typo in struct pglist_data code comment
kmsan: fix memcpy tests
mm: add cond_resched() in swapin_walk_pmd_entry()
mm: do not show fs mm pc for VM_LOCKONFAULT pages
selftests/vm: ksm_functional_tests: fixes for 32bit
selftests/vm: cow: fix compile warning on 32bit
selftests/vm: madv_populate: fix missing MADV_POPULATE_(READ|WRITE) definitions
mm/gup_test: fix PIN_LONGTERM_TEST_READ with highmem
mm,thp,rmap: fix races between updates of subpages_mapcount
mm: memcg: fix swapcached stat accounting
mm: add nodes= arg to memory.reclaim
mm: disable top-tier fallback to reclaim on proactive reclaim
selftests: cgroup: make sure reclaim target memcg is unprotected
selftests: cgroup: refactor proactive reclaim code to reclaim_until()
mm: memcg: fix stale protection of reclaim target memcg
mm/mmap: properly unaccount memory on mas_preallocate() failure
omfs: remove ->writepage
jfs: remove ->writepage
...
|
|
Pull ARM updates from Russell King:
- update unwinder to cope with module PLTs
- enable UBSAN on ARM
- improve kernel fault message
- update UEFI runtime page tables dump
- avoid clang's __aeabi_uldivmod generated in NWFPE code
- disable FIQs on CPU shutdown paths
- update XOR register usage
- a number of build updates (using .arch, thread pointer, removal of
lazy evaluation in Makefile)
- conversion of stacktrace code to stackwalk
- findbit assembly updates
- hwcap feature updates for ARMv8 CPUs
- instruction dump updates for big-endian platforms
- support for function error injection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (31 commits)
ARM: 9279/1: support function error injection
ARM: 9277/1: Make the dumped instructions are consistent with the disassembled ones
ARM: 9276/1: Refactor dump_instr()
ARM: 9275/1: Drop '-mthumb' from AFLAGS_ISA
ARM: 9274/1: Add hwcap for Speculative Store Bypassing Safe
ARM: 9273/1: Add hwcap for Speculation Barrier(SB)
ARM: 9272/1: vfp: Add hwcap for FEAT_AA32I8MM
ARM: 9271/1: vfp: Add hwcap for FEAT_AA32BF16
ARM: 9270/1: vfp: Add hwcap for FEAT_FHM
ARM: 9269/1: vfp: Add hwcap for FEAT_DotProd
ARM: 9268/1: vfp: Add hwcap FPHP and ASIMDHP for FEAT_FP16
ARM: 9267/1: Define Armv8 registers in AArch32 state
ARM: findbit: add unwinder information
ARM: findbit: operate by words
ARM: findbit: convert to macros
ARM: findbit: provide more efficient ARMv7 implementation
ARM: findbit: document ARMv5 bit offset calculation
ARM: 9259/1: stacktrace: Convert stacktrace to generic ARCH_STACKWALK
ARM: 9258/1: stacktrace: Make stack walk callback consistent with generic code
ARM: 9265/1: pass -march= only to compiler
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Another fairly sizable pull request, by EFI subsystem standards.
Most of the work was done by me, some of it in collaboration with the
distro and bootloader folks (GRUB, systemd-boot), where the main focus
has been on removing pointless per-arch differences in the way EFI
boots a Linux kernel.
- Refactor the zboot code so that it incorporates all the EFI stub
logic, rather than calling the decompressed kernel as a EFI app.
- Add support for initrd= command line option to x86 mixed mode.
- Allow initrd= to be used with arbitrary EFI accessible file systems
instead of just the one the kernel itself was loaded from.
- Move some x86-only handling and manipulation of the EFI memory map
into arch/x86, as it is not used anywhere else.
- More flexible handling of any random seeds provided by the boot
environment (i.e., systemd-boot) so that it becomes available much
earlier during the boot.
- Allow improved arch-agnostic EFI support in loaders, by setting a
uniform baseline of supported features, and adding a generic magic
number to the DOS/PE header. This should allow loaders such as GRUB
or systemd-boot to reduce the amount of arch-specific handling
substantially.
- (arm64) Run EFI runtime services from a dedicated stack, and use it
to recover from synchronous exceptions that might occur in the
firmware code.
- (arm64) Ensure that we don't allocate memory outside of the 48-bit
addressable physical range.
- Make EFI pstore record size configurable
- Add support for decoding CXL specific CPER records"
* tag 'efi-next-for-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (43 commits)
arm64: efi: Recover from synchronous exceptions occurring in firmware
arm64: efi: Execute runtime services from a dedicated stack
arm64: efi: Limit allocations to 48-bit addressable physical region
efi: Put Linux specific magic number in the DOS header
efi: libstub: Always enable initrd command line loader and bump version
efi: stub: use random seed from EFI variable
efi: vars: prohibit reading random seed variables
efi: random: combine bootloader provided RNG seed with RNG protocol output
efi/cper, cxl: Decode CXL Error Log
efi/cper, cxl: Decode CXL Protocol Error Section
efi: libstub: fix efi_load_initrd_dev_path() kernel-doc comment
efi: x86: Move EFI runtime map sysfs code to arch/x86
efi: runtime-maps: Clarify purpose and enable by default for kexec
efi: pstore: Add module parameter for setting the record size
efi: xen: Set EFI_PARAVIRT for Xen dom0 boot on all architectures
efi: memmap: Move manipulation routines into x86 arch tree
efi: memmap: Move EFI fake memmap support into x86 arch tree
efi: libstub: Undeprecate the command line initrd loader
efi: libstub: Add mixed mode support to command line initrd loader
efi: libstub: Permit mixed mode return types other than efi_status_t
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
- Replace prandom_u32_max() and various open-coded variants of it,
there is now a new family of functions that uses fast rejection
sampling to choose properly uniformly random numbers within an
interval:
get_random_u32_below(ceil) - [0, ceil)
get_random_u32_above(floor) - (floor, U32_MAX]
get_random_u32_inclusive(floor, ceil) - [floor, ceil]
Coccinelle was used to convert all current users of
prandom_u32_max(), as well as many open-coded patterns, resulting in
improvements throughout the tree.
I'll have a "late" 6.1-rc1 pull for you that removes the now unused
prandom_u32_max() function, just in case any other trees add a new
use case of it that needs to converted. According to linux-next,
there may be two trivial cases of prandom_u32_max() reintroductions
that are fixable with a 's/.../.../'. So I'll have for you a final
conversion patch doing that alongside the removal patch during the
second week.
This is a treewide change that touches many files throughout.
- More consistent use of get_random_canary().
- Updates to comments, documentation, tests, headers, and
simplification in configuration.
- The arch_get_random*_early() abstraction was only used by arm64 and
wasn't entirely useful, so this has been replaced by code that works
in all relevant contexts.
- The kernel will use and manage random seeds in non-volatile EFI
variables, refreshing a variable with a fresh seed when the RNG is
initialized. The RNG GUID namespace is then hidden from efivarfs to
prevent accidental leakage.
These changes are split into random.c infrastructure code used in the
EFI subsystem, in this pull request, and related support inside of
EFISTUB, in Ard's EFI tree. These are co-dependent for full
functionality, but the order of merging doesn't matter.
- Part of the infrastructure added for the EFI support is also used for
an improvement to the way vsprintf initializes its siphash key,
replacing an sleep loop wart.
- The hardware RNG framework now always calls its correct random.c
input function, add_hwgenerator_randomness(), rather than sometimes
going through helpers better suited for other cases.
- The add_latent_entropy() function has long been called from the fork
handler, but is a no-op when the latent entropy gcc plugin isn't
used, which is fine for the purposes of latent entropy.
But it was missing out on the cycle counter that was also being mixed
in beside the latent entropy variable. So now, if the latent entropy
gcc plugin isn't enabled, add_latent_entropy() will expand to a call
to add_device_randomness(NULL, 0), which adds a cycle counter,
without the absent latent entropy variable.
- The RNG is now reseeded from a delayed worker, rather than on demand
when used. Always running from a worker allows it to make use of the
CPU RNG on platforms like S390x, whose instructions are too slow to
do so from interrupts. It also has the effect of adding in new inputs
more frequently with more regularity, amounting to a long term
transcript of random values. Plus, it helps a bit with the upcoming
vDSO implementation (which isn't yet ready for 6.2).
- The jitter entropy algorithm now tries to execute on many different
CPUs, round-robining, in hopes of hitting even more memory latencies
and other unpredictable effects. It also will mix in a cycle counter
when the entropy timer fires, in addition to being mixed in from the
main loop, to account more explicitly for fluctuations in that timer
firing. And the state it touches is now kept within the same cache
line, so that it's assured that the different execution contexts will
cause latencies.
* tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits)
random: include <linux/once.h> in the right header
random: align entropy_timer_state to cache line
random: mix in cycle counter when jitter timer fires
random: spread out jitter callback to different CPUs
random: remove extraneous period and add a missing one in comments
efi: random: refresh non-volatile random seed when RNG is initialized
vsprintf: initialize siphash key using notifier
random: add back async readiness notifier
random: reseed in delayed work rather than on-demand
random: always mix cycle counter in add_latent_entropy()
hw_random: use add_hwgenerator_randomness() for early entropy
random: modernize documentation comment on get_random_bytes()
random: adjust comment to account for removed function
random: remove early archrandom abstraction
random: use random.trust_{bootloader,cpu} command line option only
stackprotector: actually use get_random_canary()
stackprotector: move get_random_canary() into stackprotector.h
treewide: use get_random_u32_inclusive() when possible
treewide: use get_random_u32_{above,below}() instead of manual loop
treewide: use get_random_u32_below() instead of deprecated function
...
|
|
Linux 6.1-rc8
|
|
This enables HAVE_FUNCTION_ERROR_INJECTION by adding necessary
regs_set_return_value() and override_function_with_return().
Simply tested according to Documentation/fault-injection/fault-injection.rst.
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Speculative Store Bypassing Safe(FEAT_SSBS) is a feature present in
AArch32 state for Armv8 and is represented by ID_PFR2_EL1.SSBS
identification register.
This feature denotes the presence of PSTATE.ssbs bit and hence adding a
hwcap will enable the userspace to check it before trying to set/unset
this PSTATE.
This commit adds the ID feature bit detection, and uses elf_hwcap2
accordingly.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Speculation Barrier(FEAT_SB) is a feature present in AArch32 state for
Armv8 and is represented by ISAR6.SB identification register.
This feature denotes the presence of SB instruction and hence adding a
hwcap will enable the userspace to check it before trying to use this
instruction.
This commit adds the ID feature bit detection, and uses elf_hwcap2
accordingly.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Int8 matrix multiplication (FEAT_AA32I8MM) is a feature present in AArch32 state for Armv8 and is represented by ISAR6.I8MM identification register.
This feature denotes the presence of VSMMLA, VSUDOT, VUMMLA, VUSMMLA and
VUSDOT instructions and hence adding a hwcap will enable the userspace
to check it before trying to use those instructions.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Advanced SIMD BFloat16 (FEAT_AA32BF16) is a feature present in AArch32
state for Armv8 and is represented by ISAR6.BF16 identification
register.
This feature denotes the presence of VCVT, VCVTB, VCVTT, VDOT, VFMAB,
VFMAT and VMMLA instructions and hence adding a hwcap will enable the
userspace to check it before trying to use those instructions.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Floating-point half-precision multiplication (FHM) is a feature present
in AArch32 state for Armv8 and is represented by ISAR6.FHM identification register.
This feature denotes the presence of VFMAL and VMFSL instructions and
hence adding a hwcap will enable the userspace to check it before
trying to use those instructions.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Advanced Dot product is a feature present in AArch32 state for Armv8 and
is represented by ISAR6 identification register.
This feature denotes the presence of UDOT and SDOT instructions and hence adding a hwcap will enable the userspace to check it before trying to use those instructions.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Floating point half-precision (FPHP) and Advanced SIMD half-precision
(ASIMDHP) are VFP features (FEAT_FP16) represented by MVFR1 identification register. These capabilities can optionally exist with VFPv3 and mandatory with VFPv4. Both these new features exist for Armv8 architecture in AArch32 state.
These hwcaps may be useful for the userspace to add conditional check
before trying to use FEAT_FP16 feature specific instructions.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
AArch32 Instruction Set Attribute Register 6 (ID_ISAR6_EL1) and AArch32
Processor Feature Register 2 (ID_PFR2_EL1) identifies some new features
for the Armv8 architecture. This registers will be utilized to add
hwcaps for those cpu features.
These registers are marked as reserved for Armv7 and should be a RAZ.
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Amit Daniel Kachhap <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Pull ARM fixes from Russell King:
"Two fixes for 6.1:
- fix stacktraces for tracepoint events in Thumb2 mode
- fix for noMMU ZERO_PAGE() implementation"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation
ARM: 9251/1: perf: Fix stacktraces for tracepoint events in THUMB2 kernels
|
|
The RNG always mixes in the Linux version extremely early in boot. It
also always includes a cycle counter, not only during early boot, but
each and every time it is invoked prior to being fully initialized.
Together, this means that the use of additional xors inside of the
various stackprotector.h files is superfluous and over-complicated.
Instead, we can get exactly the same thing, but better, by just calling
`get_random_canary()`.
Acked-by: Guo Ren <[email protected]> # for csky
Acked-by: Catalin Marinas <[email protected]> # for arm64
Acked-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Jason A. Donenfeld <[email protected]>
|
|
Convert the implementations to operate on words rather than bytes
which makes bitmap searching faster.
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Currently, arm64, RISC-V and LoongArch rely on the fact that struct
screen_info can be accessed directly, due to the fact that the EFI stub
and the core kernel are part of the same image. This will change after a
future patch, so let's ensure that the screen_info handling is able to
deal with this, by adopting the arm32 approach of passing it as a
configuration table. While at it, switch to ACPI reclaim memory to hold
the screen_info data, which is more appropriate for this kind of
allocation.
Signed-off-by: Ard Biesheuvel <[email protected]>
|
|
Most architectures (except arm64/x86/sparc) simply return 1 for
kern_addr_valid(), which is only used in read_kcore(), and it calls
copy_from_kernel_nofault() which could check whether the address is a
valid kernel address. So as there is no need for kern_addr_valid(), let's
remove it.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Kefeng Wang <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]> [m68k]
Acked-by: Heiko Carstens <[email protected]> [s390]
Acked-by: Christoph Hellwig <[email protected]>
Acked-by: Helge Deller <[email protected]> [parisc]
Acked-by: Michael Ellerman <[email protected]> [powerpc]
Acked-by: Guo Ren <[email protected]> [csky]
Acked-by: Catalin Marinas <[email protected]> [arm64]
Cc: Alexander Gordeev <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Anton Ivanov <[email protected]>
Cc: <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Christophe Leroy <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: H. Peter Anvin <[email protected]>
Cc: Huacai Chen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ivan Kokshaysky <[email protected]>
Cc: James Bottomley <[email protected]>
Cc: Johannes Berg <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Stefan Kristiansson <[email protected]>
Cc: Sven Schnelle <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Xuerui Wang <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
As with the generic arch_stack_walk() code the ARM stack walk code takes
a callback that is called per stack frame. Currently the ARM code always
passes a struct stackframe to the callback and the generic code just
passes the pc, however none of the users ever reference anything in the
struct other than the pc value. The ARM code also uses a return type of
int while the generic code uses a return type of bool though in both
cases the return value is a boolean value and the sense is inverted
between the two.
In order to reduce code duplication when ARM is converted to use
arch_stack_walk() change the signature and return sense of the ARM
specific callback to match that of the generic code.
Signed-off-by: Li Huafei <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Linus Waleij <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
kbuild test robot reports:
In file included from crypto/xor.c:17:
./arch/arm/include/asm/xor.h:61:3: error: write to reserved register 'R7'
GET_BLOCK_4(p1);
^
./arch/arm/include/asm/xor.h:20:10: note: expanded from macro 'GET_BLOCK_4'
__asm__("ldmia %0, {%1, %2, %3, %4}"
^
./arch/arm/include/asm/xor.h:63:3: error: write to reserved register 'R7'
PUT_BLOCK_4(p1);
^
./arch/arm/include/asm/xor.h:42:23: note: expanded from macro 'PUT_BLOCK_4'
__asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}"
^
./arch/arm/include/asm/xor.h:83:3: error: write to reserved register 'R7'
GET_BLOCK_4(p1);
^
./arch/arm/include/asm/xor.h:20:10: note: expanded from macro 'GET_BLOCK_4'
__asm__("ldmia %0, {%1, %2, %3, %4}"
^
./arch/arm/include/asm/xor.h:86:3: error: write to reserved register 'R7'
PUT_BLOCK_4(p1);
^
./arch/arm/include/asm/xor.h:42:23: note: expanded from macro 'PUT_BLOCK_4'
__asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}"
^
Thumb2 uses r7 rather than r11 as the frame pointer. Let's use r10
rather than r7 for these temporaries.
Link: https://github.com/ClangBuiltLinux/linux/issues/1732
Link: https://lore.kernel.org/llvm/[email protected]/
Reported-by: kernel test robot <[email protected]>
Suggested-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
UEFI runtime page tables dump only for ARM64 at present,
but ARM support EFI and ARM_PTDUMP_DEBUGFS now. Since
ARM could potentially execute with a 1G/3G user/kernel
split, choosing 1G as the upper limit for UEFI runtime
end, with this, we could enable UEFI runtime page tables
on ARM.
Acked-by: Ard Biesheuvel <[email protected]>
Tested-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Kefeng Wang <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
"unwind: Index not found eef26358" warnings keep popping up on
CONFIG_ARM_MODULE_PLTS-enabled systems if the PC points to a PLT veneer.
Teach the unwinder how to deal with them, taking into account they don't
change state of the stack or register file except loading PC.
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Tested-by: Kursad Oney <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Alexander Sverdlin <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Actually in no-MMU SoCs(i.e. i.MXRT) ZERO_PAGE(vaddr) expands to
```
virt_to_page(0)
```
that in order expands to:
```
pfn_to_page(virt_to_pfn(0))
```
and then virt_to_pfn(0) to:
```
((((unsigned long)(0) - PAGE_OFFSET) >> PAGE_SHIFT) +
PHYS_PFN_OFFSET)
```
where PAGE_OFFSET and PHYS_PFN_OFFSET are the DRAM offset(0x80000000) and
PAGE_SHIFT is 12. This way we obtain 16MB(0x01000000) summed to the base of
DRAM(0x80000000).
When ZERO_PAGE(0) is then used, for example in bio_add_page(), the page
gets an address that is out of DRAM bounds.
So instead of using fake virtual page 0 let's allocate a dedicated
zero_page during paging_init() and assign it to a global 'struct page *
empty_zero_page' the same way mmu.c does and it's the same approach used
in m68k with commit dc068f462179 as discussed here[0]. Then let's move
ZERO_PAGE() definition to the top of pgtable.h to be in common between
mmu.c and nommu.c.
[0]: https://lore.kernel.org/linux-m68k/[email protected]/T/#m1266ceb63
ad140743174d6b3070364d3c9a5179b
Signed-off-by: Giulio Benetti <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Store the frame address where arm_get_current_stackframe() looks for it
(ARM_r7 instead of ARM_fp if CONFIG_THUMB2_KERNEL=y). Otherwise frame->fp
gets set to 0, causing unwind_frame() to fail.
# bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
Attaching 1 probe...
@[
__schedule+1059
]: 1
A typical first unwind instruction is 0x97 (SP = R7), so after executing
it SP ends up being 0 and -URC_FAILURE is returned.
unwind_frame(pc = ac9da7d7 lr = 00000000 sp = c69bdda0 fp = 00000000)
unwind_find_idx(ac9da7d7)
unwind_exec_insn: insn = 00000097
unwind_exec_insn: fp = 00000000 sp = 00000000 lr = 00000000 pc = 00000000
With this patch:
# bpftrace -e 't:sched:sched_switch { @[kstack] = count(); exit(); }'
Attaching 1 probe...
@[
__schedule+1059
__schedule+1059
schedule+79
schedule_hrtimeout_range_clock+163
schedule_hrtimeout_range+17
ep_poll+471
SyS_epoll_wait+111
sys_epoll_pwait+231
__ret_fast_syscall+1
]: 1
Link: https://lore.kernel.org/r/[email protected]/
Reviewed-by: Linus Walleij <[email protected]>
Signed-off-by: Tomislav Novak <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
|
|
Since commit 14e85c0e69d5 ("gpio: remove gpio_descs global array")
there is no limitation on the number of GPIOs that can be allocated
in the system since the allocation is fully dynamic.
ARCH_NR_GPIOS is today only used in order to provide downwards
gpiobase allocation from that value, while static allocation is
performed upwards from 0. However that has the disadvantage of
limiting the number of GPIOs that can be registered in the system.
To overcome this limitation without requiring each and every
platform to provide its 'best-guess' maximum number, rework the
allocation to allocate upwards, allowing approx 2 millions of
GPIOs.
In order to still allow static allocation for legacy drivers, define
GPIO_DYNAMIC_BASE with the value 512 as the start for dynamic
allocation. The 512 value is chosen because it is the end of
the current default range so all current static allocations are
expected to be below that value. Of course that's just a rough
estimate based on the default value, but assuming static
allocations come first, even if there are more static allocations
it should fit under the 512 value.
In the future, it is expected that all static allocations go away
and then dynamic allocation will be patched to start at 0.
Signed-off-by: Christophe Leroy <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- hfs and hfsplus kmap API modernization (Fabio Francesco)
- make crash-kexec work properly when invoked from an NMI-time panic
(Valentin Schneider)
- ntfs bugfixes (Hawkins Jiawei)
- improve IPC msg scalability by replacing atomic_t's with percpu
counters (Jiebin Sun)
- nilfs2 cleanups (Minghao Chi)
- lots of other single patches all over the tree!
* tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype
proc: test how it holds up with mapping'less process
mailmap: update Frank Rowand email address
ia64: mca: use strscpy() is more robust and safer
init/Kconfig: fix unmet direct dependencies
ia64: update config files
nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
fork: remove duplicate included header files
init/main.c: remove unnecessary (void*) conversions
proc: mark more files as permanent
nilfs2: remove the unneeded result variable
nilfs2: delete unnecessary checks before brelse()
checkpatch: warn for non-standard fixes tag style
usr/gen_init_cpio.c: remove unnecessary -1 values from int file
ipc/msg: mitigate the lock contention with percpu counter
percpu: add percpu_counter_add_local and percpu_counter_sub_local
fs/ocfs2: fix repeated words in comments
relay: use kvcalloc to alloc page array in relay_alloc_page_array
proc: make config PROC_CHILDREN depend on PROC_FS
fs: uninline inode_maybe_inc_iversion()
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- fix a regression in the ARM dma-direct conversion (Christoph Hellwig)
- use memcpy_{from,to}_page (Fabio M. De Francesco)
- cleanup the swiotlb MAINTAINERS entry (Lukas Bulwahn)
- make SG table pool allocation less fragile (Masahiro Yamada)
- don't panic on swiotlb initialization failure (Robin Murphy)
* tag 'dma-mapping-6.1-2022-10-10' of git://git.infradead.org/users/hch/dma-mapping:
ARM/dma-mapping: remove the dma_coherent member of struct dev_archdata
ARM/dma-mappіng: don't override ->dma_coherent when set from a bus notifier
lib/sg_pool: change module_init(sg_pool_init) to subsys_initcall
MAINTAINERS: merge SWIOTLB SUBSYSTEM into DMA MAPPING HELPERS
swiotlb: don't panic!
swiotlb: replace kmap_atomic() with memcpy_{from,to}_page()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"A bit more going on than usual in the EFI subsystem. The main driver
for this has been the introduction of the LoonArch architecture last
cycle, which inspired some cleanup and refactoring of the EFI code.
Another driver for EFI changes this cycle and in the future is
confidential compute.
The LoongArch architecture does not use either struct bootparams or DT
natively [yet], and so passing information between the EFI stub and
the core kernel using either of those is undesirable. And in general,
overloading DT has been a source of issues on arm64, so using DT for
this on new architectures is a to avoid for the time being (even if we
might converge on something DT based for non-x86 architectures in the
future). For this reason, in addition to the patch that enables EFI
boot for LoongArch, there are a number of refactoring patches applied
on top of which separate the DT bits from the generic EFI stub bits.
These changes are on a separate topich branch that has been shared
with the LoongArch maintainers, who will include it in their pull
request as well. This is not ideal, but the best way to manage the
conflicts without stalling LoongArch for another cycle.
Another development inspired by LoongArch is the newly added support
for EFI based decompressors. Instead of adding yet another
arch-specific incarnation of this pattern for LoongArch, we are
introducing an EFI app based on the existing EFI libstub
infrastructure that encapulates the decompression code we use on other
architectures, but in a way that is fully generic. This has been
developed and tested in collaboration with distro and systemd folks,
who are eager to start using this for systemd-boot and also for arm64
secure boot on Fedora. Note that the EFI zimage files this introduces
can also be decompressed by non-EFI bootloaders if needed, as the
image header describes the location of the payload inside the image,
and the type of compression that was used. (Note that Fedora's arm64
GRUB is buggy [0] so you'll need a recent version or switch to
systemd-boot in order to use this.)
Finally, we are adding TPM measurement of the kernel command line
provided by EFI. There is an oversight in the TCG spec which results
in a blind spot for command line arguments passed to loaded images,
which means that either the loader or the stub needs to take the
measurement. Given the combinatorial explosion I am anticipating when
it comes to firmware/bootloader stacks and firmware based attestation
protocols (SEV-SNP, TDX, DICE, DRTM), it is good to set a baseline now
when it comes to EFI measured boot, which is that the kernel measures
the initrd and command line. Intermediate loaders can measure
additional assets if needed, but with the baseline in place, we can
deploy measured boot in a meaningful way even if you boot into Linux
straight from the EFI firmware.
Summary:
- implement EFI boot support for LoongArch
- implement generic EFI compressed boot support for arm64, RISC-V and
LoongArch, none of which implement a decompressor today
- measure the kernel command line into the TPM if measured boot is in
effect
- refactor the EFI stub code in order to isolate DT dependencies for
architectures other than x86
- avoid calling SetVirtualAddressMap() on arm64 if the configured
size of the VA space guarantees that doing so is unnecessary
- move some ARM specific code out of the generic EFI source files
- unmap kernel code from the x86 mixed mode 1:1 page tables"
* tag 'efi-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
efi/arm64: libstub: avoid SetVirtualAddressMap() when possible
efi: zboot: create MemoryMapped() device path for the parent if needed
efi: libstub: fix up the last remaining open coded boot service call
efi/arm: libstub: move ARM specific code out of generic routines
efi/libstub: measure EFI LoadOptions
efi/libstub: refactor the initrd measuring functions
efi/loongarch: libstub: remove dependency on flattened DT
efi: libstub: install boot-time memory map as config table
efi: libstub: remove DT dependency from generic stub
efi: libstub: unify initrd loading between architectures
efi: libstub: remove pointless goto kludge
efi: libstub: simplify efi_get_memory_map() and struct efi_boot_memmap
efi: libstub: avoid efi_get_memory_map() for allocating the virt map
efi: libstub: drop pointless get_memory_map() call
efi: libstub: fix type confusion for load_options_size
arm64: efi: enable generic EFI compressed boot
loongarch: efi: enable generic EFI compressed boot
riscv: efi: enable generic EFI compressed boot
efi/libstub: implement generic EFI zboot
efi/libstub: move efi_system_table global var into separate object
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"The main changes this time are for the organization of the Kconfig
files, introducing per-vendor top-level options on arm64 to match
those on arm32, and making the platform selection on arm32 more
uniform, in particular for the remaining StrongARM platforms that
still have a couple of special cases compared to the more recent ones.
I also did a cleanup of the old Footbridge platform, which was the
last holdout for the phys_to_dma()/dma_to_phys() interface that is now
completely gone from arm32, completing work started by Christoph
Hellwig"
* tag 'arm-soc-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (21 commits)
ARM: aspeed: Kconfig: Fix indentation
ARM: Drop CMDLINE_* dependency on ATAGS
ARM: Drop CMDLINE_FORCE dependency on !ARCH_MULTIPLATFORM
ARM: s3c: remove orphan declarations from arch/arm/mach-s3c/devs.h
pxa: Drop if with an always false condition
ARM: orion: fix include path
ARM: shmobile: Drop selecting SOC_BUS
arm64: renesas: Drop selecting SOC_BUS
ARM: disallow PCI with MMU=n again
ARM: footbridge: remove custom DMA address handling
MAINTAINERS: Add BCM4908 maintainer to BCMBCA entry
ARM: footbridge: move isa-dma support into footbridge
ARM: footbridge: remove leftover from personal-server
ARM: footbridge: remove addin mode
arm64: Kconfig.platforms: Group NXP platforms together
arm64: Kconfig.platforms: Re-organized Broadcom menu
ARM: make ARCH_MULTIPLATFORM user-visible
ARM: fix XIP_KERNEL dependencies
ARM: Kconfig: clean up platform selection
ARM: simplify machdirs/platdirs handling
...
|
|
Since commit ae626eb97376 ("ARM/dma-mapping: use dma-direct
unconditionally") only the dma_coherent flag in struct device is used,
so remove the now write only flag in struct dev_archdata.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
|