aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/include/asm/hardware
AgeCommit message (Collapse)AuthorFilesLines
2012-05-13ARM: clps711x: Combine header files into one for clps711x-targetsAlexander Shiyan4-151/+59
Current ARM7 Cirrus Logic product line contains only 3 cpu. EP7312 - Fully functional. EP7309 - Missing SDRAM interface. EP7311 - Missing DAI. It makes no sense to separate the header files to identify these differences, it is only necessary to keep in mind the presence or lack of any features of a specific CPU when writing code. Signed-off-by: Alexander Shiyan <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2012-05-13ARM: PCI: provide a default bus scan implementationRussell King1-1/+1
Most PCI implementations perform simple root bus scanning. Rather than having each group of platforms provide a duplicated bus scan function, provide the PCI configuration ops structure via the hw_pci structure, and call the root bus scanning function from core ARM PCI code. Acked-by: Krzysztof Hałasa <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-05-11Merge branch 'clps711x/cleanup' into next/cleanupArnd Bergmann3-31/+1
A single patch from Alexander Shiyan <[email protected]>: * clps711x/cleanup: ARM: clps711x: Using a single definition for the PHYS and VIRT registers offset Signed-off-by: Arnd Bergmann <[email protected]>
2012-05-11ARM: clps711x: Using a single definition for the PHYS and VIRT registers offsetAlexander Shiyan3-31/+1
Using a single definition for the physical and virtual address register for all variants boards clps711x. This patch also includes the use of a single function clps_read/write in some units. Signed-off-by: Alexander Shiyan <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2012-04-25dma/amba-pl08x: add support for the Nomadik variantLinus Walleij1-0/+2
The Nomadik PL080 variant has some extra protection bits that may be set, so we need to check these bits to see if the channels are actually available for the DMAengine to use. Cc: Russell King <[email protected]> Cc: Alim Akhtar <[email protected]> Cc: Alessandro Rubini <[email protected]> Reviewed-by: Viresh Kumar <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2012-04-06ARM: remove ixp23xx and ixp2000 platformsRob Herring1-62/+0
ixp2xxx platforms have had no real changes since ~2006 and the maintainer has said on irc that they can be removed: 13:05 < nico> do you still care about ixp2000? 13:22 < lennert> not really, no 13:58 < nico> do you think we could remove it from the kernel tree? 14:01 < lennert> go for it, and remove ixp23xx too while you're at it Removing will help simplify ARM consolidation in general and PCI re-work specifically. Signed-off-by: Rob Herring <[email protected]> Cc: Randy Dunlap <[email protected]> Acked-by: Lennert Buytenhek <[email protected]>
2012-03-29Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2-3/+6
Pull more ARM updates from Russell King. This got a fair number of conflicts with the <asm/system.h> split, but also with some other sparse-irq and header file include cleanups. They all looked pretty trivial, though. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits) ARM: fix Kconfig warning for HAVE_BPF_JIT ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds ARM: 7349/1: integrator: convert to sparse irqs ARM: 7259/3: net: JIT compiler for packet filters ARM: 7334/1: add jump label support ARM: 7333/2: jump label: detect %c support for ARM ARM: 7338/1: add support for early console output via semihosting ARM: use set_current_blocked() and block_sigmask() ARM: exec: remove redundant set_fs(USER_DS) ARM: 7332/1: extract out code patch function from kprobes ARM: 7331/1: extract out insn generation code from ftrace ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format ARM: 7351/1: ftrace: remove useless memory checks ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path ARM: Versatile Express: add NO_IOPORT ARM: get rid of asm/irq.h in asm/prom.h ARM: 7319/1: Print debug info for SIGBUS in user faults ARM: 7318/1: gic: refactor irq_start assignment ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop ARM: 7315/1: perf: add support for the Cortex-A7 PMU ...
2012-03-29Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-219/+0
Pull slave-dmaengine update from Vinod Koul: "This includes the cookie cleanup by Russell, the addition of context parameter for dmaengine APIs, more arm dmaengine driver cleanup by moving code to dmaengine, this time for imx by Javier and pl330 by Boojin along with the usual driver fixes." Fix up some fairly trivial conflicts with various other cleanups. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits) dmaengine: imx: fix the build failure on x86_64 dmaengine: i.MX: Fix merge of cookie branch. dmaengine: i.MX: Add support for interleaved transfers. dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages. dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'. dmaengine: imx-dma: remove unused arg of imxdma_sg_next. dmaengine: imx-dma: remove internal structure. dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure. dmaengine: imx-dma: remove 'in_use' field of 'internal' structure. dmaengine: imx-dma: remove sg member from internal structure. dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function. dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function. dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function. dmaengine: imx-dma: remove dma_mode member of internal structure. dmaengine: imx-dma: remove data member from internal structure. dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c dmaengine: at_hdmac: add slave config operation dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic dmaengine/dma_slave: introduce inline wrappers dma: imx-sdma: Treat firmware messages as warnings instead of erros ...
2012-03-28Merge tag 'split-asm_system_h-for-linus-20120328' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system Pull "Disintegrate and delete asm/system.h" from David Howells: "Here are a bunch of patches to disintegrate asm/system.h into a set of separate bits to relieve the problem of circular inclusion dependencies. I've built all the working defconfigs from all the arches that I can and made sure that they don't break. The reason for these patches is that I recently encountered a circular dependency problem that came about when I produced some patches to optimise get_order() by rewriting it to use ilog2(). This uses bitops - and on the SH arch asm/bitops.h drags in asm-generic/get_order.h by a circuituous route involving asm/system.h. The main difficulty seems to be asm/system.h. It holds a number of low level bits with no/few dependencies that are commonly used (eg. memory barriers) and a number of bits with more dependencies that aren't used in many places (eg. switch_to()). These patches break asm/system.h up into the following core pieces: (1) asm/barrier.h Move memory barriers here. This already done for MIPS and Alpha. (2) asm/switch_to.h Move switch_to() and related stuff here. (3) asm/exec.h Move arch_align_stack() here. Other process execution related bits could perhaps go here from asm/processor.h. (4) asm/cmpxchg.h Move xchg() and cmpxchg() here as they're full word atomic ops and frequently used by atomic_xchg() and atomic_cmpxchg(). (5) asm/bug.h Move die() and related bits. (6) asm/auxvec.h Move AT_VECTOR_SIZE_ARCH here. Other arch headers are created as needed on a per-arch basis." Fixed up some conflicts from other header file cleanups and moving code around that has happened in the meantime, so David's testing is somewhat weakened by that. We'll find out anything that got broken and fix it.. * tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits) Delete all instances of asm/system.h Remove all #inclusions of asm/system.h Add #includes needed to permit the removal of asm/system.h Move all declarations of free_initmem() to linux/mm.h Disintegrate asm/system.h for OpenRISC Split arch_align_stack() out from asm-generic/system.h Split the switch_to() wrapper out of asm-generic/system.h Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h Create asm-generic/barrier.h Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h Disintegrate asm/system.h for Xtensa Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt] Disintegrate asm/system.h for Tile Disintegrate asm/system.h for Sparc Disintegrate asm/system.h for SH Disintegrate asm/system.h for Score Disintegrate asm/system.h for S390 Disintegrate asm/system.h for PowerPC Disintegrate asm/system.h for PA-RISC Disintegrate asm/system.h for MN10300 ...
2012-03-27Merge branch 'platforms' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-133/+23
Pull ARM platform updates from Russell King: "This covers platform stuff for platforms I have a direct interest in (iow, I have the hardware). Essentially: - as we no longer support any other Acorn platforms other than RiscPC anymore, we can collect all that code into mach-rpc. - convert Acorn expansion card stuff to use IRQ allocation functions, and get rid of NO_IRQ from there. - cleanups to the ebsa110 platform to move some private stuff out of its header files. - large amount of SA11x0 updates: - conversion of private DMA implementation to DMA engine support (this actually gives us greater flexibility in drivers over the old API.) - re-worked ucb1x00 updates - convert to genirq, remove sa11x0 dependencies, fix various minor issues - move platform specific sa11x0 framebuffer data into platform files in arch/arm instead of keeping this in the driver itself - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA for SIR transmissions as well as FIR - rework sa1111 support for genirq, and irq allocation - fix sa1111 IRQ support so it works again - use sparse IRQ support After this, I have one more pull request remaining from my current set, which I think is going to be the most problematical as it generates 8 conflicts." Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per Russell. * 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits) ARM: 7343/1: sa11x0: convert to sparse IRQ ARM: 7342/2: sa1100: prepare for sparse irq conversion ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h ARM: sa11x0: remove unused DMA controller definitions ARM: sa11x0: remove old SoC private DMA driver USB: sa1111: add hcd .reset method USB: sa1111: add OHCI shutdown methods USB: sa1111: reorganize ohci-sa1111.c USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) USB: sa1111: sparse and checkpatch cleanups ARM: sa11x0: don't static map sa1111 ARM: sa1111: use dev_err() rather than printk() ARM: sa1111: cleanup sub-device registration and unregistration ARM: sa1111: only setup DMA for DMA capable devices ARM: sa1111: register sa1111 devices with dmabounce in bus notifier ARM: sa1111: move USB interface register definitions to ohci-sa1111.c ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c ARM: sa1111: delete unused physical GPIO register definitions ...
2012-03-27Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-1/+14
Pull "ARM: SoC specific updates" from Arnd Bergmann: "These changes are all specific to an soc family or the code for one soc. Lots of work for Tegra3 this time, but also a lot of other platforms. There will be another (smaller) set of soc patches later in the merge window for stuff that has dependencies on external trees or that was sent just before the merge window opened. The asoc tree added a few devices to the i.mx platform, which conflict with other devices added in the same place here. The tegra Makefile conflicts between a number of branches, mostly because of changes regarding localtimer.c, which was removed in the end. Signed-off-by: Arnd Bergmann <[email protected]>" Fix up some trivial conflicts, including the mentioned Tegra Makefile. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: EXYNOS: fix cycle count for periodic mode of clock event timers ARM: EXYNOS: add support JPEG ARM: EXYNOS: Add DMC1, allow PPMU access for DMC ARM: SAMSUNG: Correct MIPI-CSIS io memory resource definition ARM: SAMSUNG: fix __init attribute on regarding s3c_set_platdata() ARM: SAMSUNG: Add __init attribute to samsung_bl_set() ARM: S5PV210: Add usb otg phy control ARM: S3C64XX: Add usb otg phy control ARM: EXYNOS: Enable l2 configuration through device tree ARM: EXYNOS: remove useless code to save/restore L2 ARM: EXYNOS: save L2 settings during bootup ARM: S5P: add L2 early resume code ARM: EXYNOS: Add support AFTR mode on EXYNOS4210 ARM: mx35: Setup the AIPS registers ARM: mx5: Use common function for configuring AIPS ARM: mx3: Setup AIPS registers ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI ARM: defconfig: imx_v6_v7: build in REGULATOR_FIXED_VOLTAGE ARM: imx: update imx_v6_v7_defconfig ARM: tegra: Demote EMC clock inconsistency BUG to WARN ...
2012-03-27Merge tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+5
Pull "ARM: timer cleanup work" from Arnd Bergmann: "These are split out from the generic soc and driver updates because there was a lot of conflicting work by multiple people. Marc Zyngier worked on simplifying the "localtimer" interfaces, and some of the platforms are touching the same code as they move to device tree based booting. Signed-off-by: Arnd Bergmann <[email protected]>" * tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) ARM: tegra: select USB_ULPI if USB is selected arm/tegra: pcie: fix return value of function ARM: ux500: fix compilation after local timer rework ARM: shmobile: remove additional __io() macro use ARM: local timers: make the runtime registration interface mandatory ARM: local timers: convert MSM to runtime registration interface ARM: local timers: convert exynos to runtime registration interface ARM: smp_twd: remove old local timer interface ARM: imx6q: convert to twd_local_timer_register() interface ARM: highbank: convert to twd_local_timer_register() interface ARM: ux500: convert to twd_local_timer_register() interface ARM: shmobile: convert to twd_local_timer_register() interface ARM: tegra: convert to twd_local_timer_register() interface ARM: plat-versatile: convert to twd_local_timer_register() interface ARM: OMAP4: convert to twd_local_timer_register() interface ARM: smp_twd: add device tree support ARM: smp_twd: add runtime registration support ARM: local timers: introduce a new registration interface ARM: smp_twd: make local_timer_stop a symbol instead of a #define ARM: mach-shmobile: default to no earlytimer ...
2012-03-27Merge branch 'devel-stable' into for-linusRussell King1-0/+3
Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-24ARM: sa1111: move USB interface register definitions to ohci-sa1111.cRussell King1-25/+1
Move the USB interface register definitions into the driver, rather than keeping them in a common place. Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-03-24ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.cRussell King1-43/+2
Move the PCMCIA interface register definitions into the driver, rather than keeping them in a common place. Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-03-24ARM: sa1111: move PS/2 interface register definitions to sa1111p2.cRussell King1-38/+1
Move the PS/2 interface register definitions into the driver, rather than keeping them in a common location. Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-03-24ARM: sa1111: delete unused physical GPIO register definitionsRussell King1-16/+0
Get rid of the unused GPIO register definitions - we access GPIO registers through the base + offset method, and having the phys address definitions is unnecessary duplication. Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-03-24ARM: sa1111: provide a generic way to prevent devices from registeringRussell King1-0/+1
Some platforms don't want certain devices to be registered, because, eg, the interface is not wired. Provide a way for platforms to prevent various devices from being registered via a devid bitmask in the platform data. Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-03-23Merge branch 'for-armsoc' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds1-8/+0
Pull #1 ARM updates from Russell King: "This one covers stuff which Arnd is waiting for me to push, as this is shared between both our trees and probably other trees elsewhere. Essentially, this contains: - AMBA primecell device initializer updates - mostly shrinking the size of the device declarations in platform code to something more reasonable. - Getting rid of the NO_IRQ crap from AMBA primecell stuff. - Nicolas' idle cleanups. This in combination with the restart cleanups from the last merge window results in a great many mach/system.h files being deleted." Yay: ~80 files, ~2000 lines deleted. * 'for-armsoc' of git://git.linaro.org/people/rmk/linux-arm: (60 commits) ARM: remove disable_fiq and arch_ret_to_user macros ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLER ARM: rpc: make default fiq handler run-time installed ARM: make arch_ret_to_user macro optional ARM: amba: samsung: use common amba device initializers ARM: amba: spear: use common amba device initializers ARM: amba: nomadik: use common amba device initializers ARM: amba: u300: use common amba device initializers ARM: amba: lpc32xx: use common amba device initializers ARM: amba: netx: use common amba device initializers ARM: amba: bcmring: use common amba device initializers ARM: amba: ep93xx: use common amba device initializers ARM: amba: omap2: use common amba device initializers ARM: amba: integrator: use common amba device initializers ARM: amba: realview: get rid of private platform amba_device initializer ARM: amba: versatile: get rid of private platform amba_device initializer ARM: amba: vexpress: get rid of private platform amba_device initializer ARM: amba: provide common initializers for static amba devices ARM: amba: make use of -1 IRQs warn ARM: amba: u300: get rid of NO_IRQ initializers ...
2012-03-23ARM: Fix missing linux/types.h #inclusion in asm/hardware/iop3xx.hDavid Howells1-0/+3
arch/arm/include/asm/hardware/iop3xx.h needs to include linux/types.h to avoid the following errors: In file included from arch/arm/plat-iop/restart.c:10:0: /data/fs/linux-2.6-fscache/arch/arm/include/asm/hardware/iop3xx.h:239:1: error: unknown type name 'u32' /data/fs/linux-2.6-fscache/arch/arm/include/asm/hardware/iop3xx.h: In function 'read_tmr0': /data/fs/linux-2.6-fscache/arch/arm/include/asm/hardware/iop3xx.h:241:2: error: unknown type name 'u32' /data/fs/linux-2.6-fscache/arch/arm/include/asm/hardware/iop3xx.h: At top level: /data/fs/linux-2.6-fscache/arch/arm/include/asm/hardware/iop3xx.h:246:31: error: unknown type name 'u32' ... Signed-off-by: David Howells <[email protected]>
2012-03-21Merge tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-2/+4
Pull irq_domain support for all architectures from Grant Likely: "Generialize powerpc's irq_host as irq_domain This branch takes the PowerPC irq_host infrastructure (reverse mapping from Linux IRQ numbers to hardware irq numbering), generalizes it, renames it to irq_domain, and makes it available to all architectures. Originally the plan has been to create an all-new irq_domain implementation which addresses some of the powerpc shortcomings such as not handling 1:1 mappings well, but doing that proved to be far more difficult and invasive than generalizing the working code and refactoring it in-place. So, this branch rips out the 'new' irq_domain and replaces it with the modified powerpc version (in a fully bisectable way of course). It converts all users over to the new API and makes irq_domain selectable on any architecture. No architecture is forced to enable irq_domain, but the infrastructure is required for doing OpenFirmware style irq translations. It will even work on SPARC even though SPARC has it's own mechanism for translating irqs at boot time. MIPS, microblaze, embedded x86 and c6x are converted too. The resulting irq_domain code is probably still too verbose and can be optimized more, but that can be done incrementally and is a task for follow-on patches." * tag 'irqdomain-for-linus' of git://git.secretlab.ca/git/linux-2.6: (31 commits) dt: fix twl4030 for non-dt compile on x86 mfd: twl-core: Add IRQ_DOMAIN dependency devicetree: Add empty of_platform_populate() for !CONFIG_OF_ADDRESS (sparc) irq_domain: Centralize definition of irq_dispose_mapping() irq_domain/mips: Allow irq_domain on MIPS irq_domain/x86: Convert x86 (embedded) to use common irq_domain ppc-6xx: fix build failure in flipper-pic.c and hlwd-pic.c irq_domain/microblaze: Convert microblaze to use irq_domains irq_domain/powerpc: Replace custom xlate functions with library functions irq_domain/powerpc: constify irq_domain_ops irq_domain/c6x: Use library of xlate functions irq_domain/c6x: constify irq_domain structures irq_domain/c6x: Convert c6x to use generic irq_domain support. irq_domain: constify irq_domain_ops irq_domain: Create common xlate functions that device drivers can use irq_domain: Remove irq_domain_add_simple() irq_domain: Remove 'new' irq_domain in favour of the ppc one mfd: twl-core.c: Fix the number of interrupts managed by twl4030 of/address: add empty static inlines for !CONFIG_OF irq_domain: Add support for base irq and hwirq in legacy mappings ...
2012-03-21Merge branch 'tegra/cleanups' into next/timerArnd Bergmann1-8/+0
Conflicts: arch/arm/mach-tegra/Makefile arch/arm/mach-vexpress/core.h The tegra Makefile was changed in four different branches in the same line. This merge should reduce the amount of churn. Signed-off-by: Arnd Bergmann <[email protected]>
2012-03-20Merge branch 'renesas/timer' into next/timerArnd Bergmann1-1/+1
Conflicts: arch/arm/mach-shmobile/timer.c This resolves a nonobvious merge conflict between renesas timer changes in the global timer changes with those from the renesas soc branch and last minute bug fixes that went into v3.3. Signed-off-by: Arnd Bergmann <[email protected]>
2012-03-13Merge branch 'rmk_cookie_fixes2' into nextVinod Koul1-2/+0
Conflicts: drivers/dma/imx-dma.c drivers/dma/pl330.c Signed-off-by: Vinod Koul <[email protected]>
2012-03-13dmaengine: move last completed cookie into generic dma_chan structureRussell King - ARM Linux1-2/+0
Every DMA engine implementation declares a last completed dma cookie in their private dma channel structures. This is pointless, and forces driver specific code. Move this out into the common dma_chan structure. Signed-off-by: Russell King <[email protected]> Tested-by: Linus Walleij <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Acked-by: Jassi Brar <[email protected]> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2012-03-08DMA: PL330: Merge PL330 driver into drivers/dma/Boojin Kim1-217/+0
Currently there were two part of DMAC PL330 driver for support old styled s3c-pl330 which has been merged into drivers/dma/pl330.c driver. Actually, there is no reason to separate them now. Basically this patch merges arch/arm/common/pl330.c into drivers/dma/pl330.c driver and removes useless exported symbol, externed function and so on. The newer pl330 driver tested on SMDKV310 and SMDK4212 boards Cc: Jassi Brar <[email protected]> Cc: Russell King <[email protected]> Acked-by: Linus Walleij <[email protected]> Acked-by: Vinod Koul <[email protected]> Signed-off-by: Boojin Kim <[email protected]> Signed-off-by: Kukjin Kim <[email protected]> Acked-by: Jassi Brar <[email protected]> Signed-off-by: Vinod Koul <[email protected]>
2012-02-28Merge branch 'imx/defconfig' of ↵Arnd Bergmann1-1/+1
git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc * 'imx/defconfig' of git://git.linaro.org/people/shawnguo/linux-2.6: (2 commits) ARM: defconfig: imx_v6_v7: build in REGULATOR_FIXED_VOLTAGE ARM: imx: update imx_v6_v7_defconfig (upadte to v3.3-rc5)
2012-02-23ARM: vexpress: Get rid of MMIO_P2VPawel Moll1-0/+5
This patch gets rid of the MMIO_P2V and __MMIO_P2V macros, defining constant virtual base for motherboard and tile peripherals instead. Additionally, in preparation for the new motherboard memory map, the motherboard peripherals are using base pointers calculated in runtime, instead of compile-time calculated values. Signed-off-by: Pawel Moll <[email protected]>
2012-02-21ARM: remove disable_fiq and arch_ret_to_user macrosRob Herring1-8/+0
Now that most platforms don't need disable_fiq and arch_ret_to_user macros, we can remove the empty macros or empty entry-macro.S files. Signed-off-by: Rob Herring <[email protected]> Acked-by: Jamie Iles <[email protected]> Acked-by: Nicolas Pitre <[email protected]> Acked-by: Tony Lindgren <[email protected]> Acked-by: Linus Walleij <[email protected]> Acked-by: Ryan Mallon <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Acked-by: H Hartley Sweeten <[email protected]> Acked-by: Shawn Guo <[email protected]>
2012-02-16irq_domain: Remove 'new' irq_domain in favour of the ppc oneGrant Likely2-2/+4
This patch removes the simplistic implementation of irq_domains and enables the powerpc infrastructure for all irq_domain users. The powerpc infrastructure includes support for complex mappings between Linux and hardware irq numbers, and can manage allocation of irq_descs. This patch also converts the few users of irq_domain_add()/irq_domain_del() to call irq_domain_add_legacy() instead. v3: Fix bug that set up too many irqs in translation range. v2: Fix removal of irq_alloc_descs() call in gic driver Signed-off-by: Grant Likely <[email protected]> Cc: Rob Herring <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Milton Miller <[email protected]> Tested-by: Olof Johansson <[email protected]>
2012-02-15ARM: 7164/3: PL330: Fix the size of the dst_cache_ctrl fieldJavi Merino1-1/+1
dst_cache_ctrl affects bits 3, 1 and 0 of AWCACHE but it is a 3-bit field in the Channel Control Register (see Table 3-21 of the DMA-330 Technical Reference Manual) and should be programmed as such. Reference: <[email protected]> Signed-off-by: Javi Merino <[email protected]> Acked-by: Jassi Brar <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-02-09ARM: timer-sp: add sched_clock supportRob Herring1-1/+14
Add a sched_clock support for the sp804 timer. The clocksource timer can optionally initialize itself as sched_clock timer. Signed-off-by: Rob Herring <[email protected]>
2012-02-09ARM: sa1111: change devid to be a bitmaskRussell King1-9/+11
Change the sa1111 device id to be a bitmask. This allows us to specify the actual device, while allowing a single driver to bind to both PS2 devices. Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-02-09ARM: sa1111: add platform enable/disable functionsRussell King1-2/+6
Add platform hooks to be called when individual sa1111 devices are enabled and disabled. This will allow us to move some platform specifics out of the individual drivers. Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-02-09ARM: sa1111: add shutdown hook to sa1111_driver structureRussell King1-0/+1
Add a shutdown hook to the sa1111_driver structure to allow drivers to be notified of system reboots and shutdowns. Acked-by: Nicolas Pitre <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-01-25ARM: it8152: explicitly include mach/irqs.hRob Herring1-0/+3
In preparation to make mach/irqs.h optional, directly include mach/irq.h to get IRQ_BOARD_START. Signed-off-by: Rob Herring <[email protected]>
2012-01-20ARM: cache-l2x0.c: consistently use u32Russell King1-3/+3
__u32 exists to avoid namespace clashes with userspace programs. It should not be used outside header files, so convert to use u32 instead. Also, don't mix uint32_t and __u32 - use the same type throughout the file for consistency. Acked-by: Catalin Marinas <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-01-05Merge branch 'restart' into for-linusRussell King1-0/+1
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05ARM: restart: iop3xx: use new restart hookRussell King1-0/+1
Hook these platforms restart code into the arm_pm_restart hook rather than using arch_reset(). In doing so, we split out the n2100 platform specific restart handler into the n2100 platform file. Acked-by: Lennert Buytenhek <[email protected]> Signed-off-by: Russell King <[email protected]>
2011-12-05Merge branch 'for-rmk' of ↵Russell King1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable Conflicts: arch/arm/common/gic.c arch/arm/plat-omap/include/plat/common.h
2011-11-15ARM: vic: MULTI_IRQ_HANDLER handlerJamie Iles1-0/+3
Add a handler for the VIC that is suitable for MULTI_IRQ_HANDLER platforms. This can replace the ASM entry macros for platforms that use the VIC. v4: - rebase ontop of move __exception and friends to asm/exception.h - rework polling loop to handle as many irqs as possible in one go v3: - simplify irq handling loop as suggested by Grant - service interrupts from msb->lsb order v2: - allow the handler be used for !CONFIG_OF - use irq_domain_to_irq() Cc: Rob Herring <[email protected]> Acked-by: Grant Likely <[email protected]> Acked-by: Linus Walleij <[email protected]> Tested-by: Thomas Abraham <[email protected]> Signed-off-by: Jamie Iles <[email protected]>
2011-11-15ARM: vic: device tree bindingJamie Iles1-1/+6
This adds a device tree binding for the VIC based on the of_irq_init() support. This adds an irqdomain to the vic and always registers all vics in the static vic array rather than for pm only to keep track of the irq domain. struct irq_data::hwirq is used where appropriate rather than runtime masking. v3: - include linux/export.h for THIS_MODULE v2: - use irq_domain_simple_ops - remove stub implementation of vic_of_init for !CONFIG_OF - Make VIC select IRQ_DOMAIN Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Grant Likely <[email protected]> Tested-by: Thomas Abraham <[email protected]> Signed-off-by: Jamie Iles <[email protected]>
2011-11-15ARM: GIC: Make MULTI_IRQ_HANDLER mandatoryMarc Zyngier2-61/+0
Now that MULTI_IRQ_HANDLER is selected by all the in-tree GIC users, make it mandatory and remove the unused macros. Signed-off-by: Marc Zyngier <[email protected]>
2011-11-15ARM: GIC: Add global gic_handle_irq() functionMarc Zyngier1-0/+1
Provide the GIC code with a low level handler that can be used by platforms using CONFIG_MULTI_IRQ_HANDLER. Signed-off-by: Marc Zyngier <[email protected]>
2011-11-15ARM: gic: allow GIC to support non-banked setupsMarc Zyngier1-16/+8
The GIC support code is heavily using the fact that hardware implementations are exposing banked registers. Unfortunately, it looks like at least one GIC implementation (EXYNOS) offers both the distributor and the CPU interfaces at different addresses, depending on the CPU. This problem is solved by allowing the distributor and CPU interface addresses to be per-cpu variables for the platforms that require it. The EXYNOS code is updated not to mess with the GIC internals while handling interrupts, and struct gic_chip_data is back to being private. The DT binding for the gic is updated to allow an optional "cpu-offset" value, which is used to compute the various base addresses. Finally, a new config option (GIC_NON_BANKED) is used to control this feature, so the overhead is only present on kernels compiled with support for EXYNOS. Tested on Origen (EXYNOS4) and Panda (OMAP4). Cc: Kukjin Kim <[email protected]> Cc: Will Deacon <[email protected]> Cc: Thomas Abraham <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2011-11-12ARM: 7156/1: l2x0: fix compile error on !CONFIG_USE_OFOlof Johansson1-0/+2
fae2b89ab1 (ARM: l2x0: add empty l2x0_of_init) adds a static inline function that returns -ENODEV, but at least on tegra cache-l2x0.h is included without errno.h being pulled in first, resulting in compile errors if OF isn't enabled: In file included from arch/arm/mach-tegra/common.c:26: arch/arm/include/asm/hardware/cache-l2x0.h: In function 'l2x0_of_init': arch/arm/include/asm/hardware/cache-l2x0.h:110: error: 'ENODEV' undeclared (first use in this function) arch/arm/include/asm/hardware/cache-l2x0.h:110: error: (Each undeclared identifier is reported only once arch/arm/include/asm/hardware/cache-l2x0.h:110: error: for each function it appears in.) Add errno.h to the include file to make it self-contained. Signed-off-by: Olof Johansson <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Russell King <[email protected]>
2011-11-04Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-0/+4
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
2011-11-01Merge branch 'next/soc' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds1-1/+8
* 'next/soc' of git://git.linaro.org/people/arnd/arm-soc: (21 commits) MAINTAINERS: add ARM/FREESCALE IMX6 entry arm/imx: merge i.MX3 and i.MX6 arm/imx6q: add suspend/resume support arm/imx6q: add device tree machine support arm/imx6q: add smp and cpu hotplug support arm/imx6q: add core drivers clock, gpc, mmdc and src arm/imx: add gic_handle_irq function arm/imx6q: add core definitions and low-level debug uart arm/imx6q: add device tree source ARM: highbank: add suspend support ARM: highbank: Add cpu hotplug support ARM: highbank: add SMP support MAINTAINERS: add Calxeda Highbank ARM platform ARM: add Highbank core platform support ARM: highbank: add devicetree source ARM: l2x0: add empty l2x0_of_init picoxcell: add a definition of VMALLOC_END picoxcell: remove custom ioremap implementation picoxcell: add the DTS for the PC7302 board picoxcell: add the DTS for pc3x2 and pc3x3 devices ... Fix up trivial conflicts in arch/arm/Kconfig, and some more header file conflicts in arch/arm/mach-omap2/board-generic.c (as per an ealier merge by Arnd).
2011-11-01Merge branch 'next/dt' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds1-2/+8
* 'next/dt' of git://git.linaro.org/people/arnd/arm-soc: ARM: gic: use module.h instead of export.h ARM: gic: fix irq_alloc_descs handling for sparse irq ARM: gic: add OF based initialization ARM: gic: add irq_domain support irq: support domains with non-zero hwirq base of/irq: introduce of_irq_init ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support ARM: at91: dt: at91sam9g45 family and board device tree files arm/mx5: add device tree support for imx51 babbage arm/mx5: add device tree support for imx53 boards ARM: msm: Add devicetree support for msm8660-surf msm_serial: Add devicetree support msm_serial: Use relative resources for iomem Fix up conflicts in arch/arm/mach-at91/{at91sam9260.c,at91sam9g45.c}
2011-11-01Merge branch 'next/fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds1-1/+1
* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits) ARM: pxa/cm-x300: properly set bt_reset pin ARM: mmp: rename SHEEVAD to GPLUGD ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT' ARM: i.MX28: shift frac value in _CLK_SET_RATE plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired ARM: mx5: fix clock usage for suspend ARM: pxa: use correct __iomem annotations ARM: pxa: sharpsl pm needs SPI ARM: pxa: centro and treo680 need palm27x ARM: pxa: make pxafb_smart_*() empty when not enabled ARM: pxa: select POWER_SUPPLY on raumfeld ARM: pxa: pxa95x is incompatible with earlier pxa ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ ARM: pxa: pxa95x/saarb depends on pxa3xx code ARM: pxa: allow selecting just one of TREO680/CENTRO ARM: pxa: export symbols from pxa3xx-ulpi ARM: pxa: make zylonite_pxa*_init declaration match code ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available ARM: at91: add defconfig for at91sam9g45 family ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig ...