| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
the valid property
By checking the pmic node with microchip,mcp16502.yaml#
'regulator-suspend-voltage' does not match any of the
regexes 'pinctrl-[0-9]+' from schema microchip,mcp16502.yaml#
which inherits regulator.yaml#. So replace regulator-suspend-voltage
with regulator-suspend-microvolt to avoid the inconsitency.
Fixes: 85b1304b9daa ("ARM: dts: at91: sama7g5ek: set regulator voltages for standby state")
Signed-off-by: Andrei Simion <[email protected]>
Acked-by: Nicolas Ferre <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[claudiu.beznea: added a dot before starting the last sentence in commit
description]
Signed-off-by: Claudiu Beznea <[email protected]>
|
|
Remove the earlycon boot argument. As Krzysztof pointed out, earlycon is
for debugging, not regular mainline usage.
Signed-off-by: Arınç ÜNAL <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20240414-for-soc-asus-rt-ac3100-improvements-v1-4-0e40caf1a70a@arinc9.com
Signed-off-by: Florian Fainelli <[email protected]>
|
|
The compatible property on the node with the srab handle is already
described with the same value on the included device tree. Remove it.
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/20240414-for-soc-asus-rt-ac3100-improvements-v1-3-0e40caf1a70a@arinc9.com
Signed-off-by: Florian Fainelli <[email protected]>
|
|
Do not leave the providing of a MAC address for an SoC MAC to a driver.
Describe it on the bindings. Provide a distinct MAC address for each SoC
MAC.
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/20240414-for-soc-asus-rt-ac3100-improvements-v1-2-0e40caf1a70a@arinc9.com
Signed-off-by: Florian Fainelli <[email protected]>
|
|
As the label property for LEDs is deprecated, use the color and function
properties to describe the LEDs on the device tree file for ASUS RT-AC3100
and ASUS RT-AC88U. Reorder the LED and button nodes in alphabetical order.
Signed-off-by: Arınç ÜNAL <[email protected]>
Link: https://lore.kernel.org/r/20240414-for-soc-asus-rt-ac3100-improvements-v1-1-0e40caf1a70a@arinc9.com
Signed-off-by: Florian Fainelli <[email protected]>
|
|
What works:
- Serial console
- mmc0, mmc2 (both microSD card slots on the board)
- All buttons (gpio and lradc based)
- Power LED
- PMIC
- RTC
- USB OTG/gadgets mode
Signed-off-by: Denis Burkov <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jernej Skrabec <[email protected]>
|
|
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens. Use also generic name for pwrseq
node, because generic naming is favored by Devicetree spec. All the
clocks affected by this change use clock-output-names, so resulting
clock name should not change. Functional impact checked with comparing
before/after DTBs with dtx_diff and fdtdump.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jernej Skrabec <[email protected]>
|
|
Delete node via phandle, not via full node path, to avoid easy mistakes
- if original node name changes, such deletion would be ineffective and
not reported by the dtc as error.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Jernej Skrabec <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jernej Skrabec <[email protected]>
|
|
The DTS code coding style expects exactly one space before '{'
character.
Acked-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
On dra76x, most dpll_gmac output clksel clocks are in registers from
CM_CLKSEL_DPLL_GMAC to CM_DIV_H13_DPLL_GMAC. In addition to that, there
are there more clocks in the CTRL_CORE_SMA_SW_0 register.
Let's group the CTRL_CORE_SMA_SW_0 clocks using the clksel binding to
reduce make W=1 dtbs unique_unit_address warnings, and stop using the
custom the ti,bit-shift property in favor of the standard reg property.
Let's also add a comment for the CTRL_CORE_SMA_SW_0 clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the clkcsel binding we can drop the custom ti,bit-shift devicetree
property in favor of the standard reg property and reduce the number of
clocks to update for the make W-1 dtbs warnings.
Let's also add a comment for the clocksel clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the clkcsel binding we can drop the custom ti,bit-shift devicetree
property in favor of the standard reg property and reduce the number of
clocks to update for the make W-1 dtbs warnings.
Let's also add a comment for the clocksel clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the clkcsel binding we can drop the custom ti,bit-shift devicetree
property in favor of the standard reg property and reduce the number of
clocks to update for the make W-1 dtbs warnings.
Let's also add a comment for the clocksel clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the clkcsel binding we can drop the custom ti,bit-shift devicetree
property in favor of the standard reg property and reduce the number of
clocks to update for the make W-1 dtbs warnings.
Let's also add a comment for the clocksel clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the clkcsel binding we can drop the custom ti,bit-shift devicetree
property in favor of the standard reg property and reduce the number of
clocks to update for the make W-1 dtbs warnings.
Let's also add a comment for the clocksel clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the clkcsel binding we can drop the custom ti,bit-shift devicetree
property in favor of the standard reg property and reduce the number of
clocks to update for the make W-1 dtbs warnings.
Let's also add a comment for the clocksel clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the clkcsel binding we can drop the custom ti,bit-shift devicetree
property in favor of the standard reg property and reduce the number of
clocks to update for the make W-1 dtbs warnings.
Let's also add a comment for the clocksel clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the clkcsel binding we can drop the custom ti,bit-shift devicetree
property in favor of the standard reg property and reduce the number of
clocks to update for the make W-1 dtbs warnings.
Let's also add a comment for the clocksel clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the clkcsel binding we can drop the custom ti,bit-shift devicetree
property in favor of the standard reg property and reduce the number of
clocks to update for the make W-1 dtbs warnings.
Let's also add a comment for the clocksel clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the clkcsel binding we can drop the custom ti,bit-shift devicetree
property in favor of the standard reg property and reduce the number of
clocks to update for the make W-1 dtbs warnings.
Let's also add a comment for the clocksel clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
With the clkcsel binding we can drop the custom ti,bit-shift devicetree
property in favor of the standard reg property and reduce the number of
clocks to update for the make W-1 dtbs warnings.
Let's also add a comment for the clocksel clock that matches the
documentation.
Signed-off-by: Tony Lindgren <[email protected]>
|
|
The property ti,system-reboot-controller is no longer needed as the reboot
handler is now always registered. Remove this property.
While here remove the comment about delete-property, all K2G platforms use
PMMC, and it wasn't good advice anyway.
Signed-off-by: Andrew Davis <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Enable the vibrator connected to PM8941 found on the Sony shinano
platform.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
As the "soc" node already specifies the GIC as the interrupt-parent,
there is no reason to repeat this in any of its subnodes.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/7ac440ec923f5d781a93c4344d6fedf280c3fa72.1712064816.git.geert+renesas@glider.be
|
|
Add QCA8075 PHY Package nodes. The PHY nodes that were previously
defined never worked and actually never had a driver to correctly setup
these PHY. Now that we have a correct driver, correctly add the PHY
Package node and set the default value of 300mw for tx driver strength
following specification of ipq4019 SoC.
Signed-off-by: Christian Marangi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Add a device tree for the Motorola Moto G (2013) smartphone based
on the Qualcomm MSM8226 SoC.
Initially supported features:
- Buttons (Volume Down/Up, Power)
- eMMC
- Hall Effect Sensor
- SimpleFB display
- TMP108 temperature sensor
- Vibrator
Note: the dhob and shob reserved-memory regions are seemingly a part of some
Motorola specific (firmware?) mechanism, see [1].
[1] https://github.com/LineageOS/android_kernel_motorola_msm8226/blob/cm-14.1/Documentation/devicetree/bindings/misc/hob_ram.txt
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Stanislav Jakubek <[email protected]>
Link: https://lore.kernel.org/r/ef86e9c84b082f7549f2ca825adfb5cbea640637.1712480582.git.stano.jakubek@gmail.com
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Add an empty /chosen node to the dtsi like is common on most other
Qualcomm SoC files, so that various pieces of software expecting this
node to exist don't complain.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Add the @0 from reg to the node name, so that both dtc warning and dt
validation failure get resolved.
arch/arm/boot/dts/qcom/qcom-msm8974.dtsi:106.9-109.4: Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
[..]/arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dtb: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 0]]}
from schema $id: http://devicetree.org/schemas/root-node.yaml#
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Add a fixed regulator to model the power supply to the camera connector.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Dave Stevenson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Florian Fainelli <[email protected]>
|
|
The cm4-io board comes with a PCF85063 on I2C0, connected to the GPIO44
and GPIO45 pins. Add it to the device tree.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Acked-by: Dave Stevenson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Florian Fainelli <[email protected]>
|
|
BCM2711-based Raspberry Pi boards (4B, CM4 and 400) multiplex the I2C0
controller over two sets of pins, GPIO0+1 and GPIO44+45. The former is
exposed on the 40-pin header, while the latter is used for the CSI and
DSI connectors.
Add a pinctrl-based I2C bus multiplexer to bcm2711-rpi.dtsi to model
this multiplexing. The two child buses are named i2c0_0 and i2c0_1.
Note that if you modified the dts before to add devices to the i2c bus
appearing on pins gpio0 + gpio1 (either directly in the dts or using an
overlay), you have to put these into the i2c0_0 node introduced here
now.
Signed-off-by: Uwe Kleine-König <[email protected]>
Signed-off-by: Laurent Pinchart <[email protected]>
Acked-by: Dave Stevenson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Florian Fainelli <[email protected]>
|
|
The Raspberry Pi firmware handles clocks on all BCM2835-derived SoCs. It
is currently defined identically in both bcm2711-rpi.dtsi and
bcm2835-rpi-common.dtsi. Move the definitions to the common
bcm2835-rpi.dtsi file.
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Dave Stevenson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Florian Fainelli <[email protected]>
|
|
The firmware node contains a "dma-ranges" property to enable usage of
the DMA mapping API with its child devices, along with "#address-cells"
and "#size-cells" properties to support the dma-ranges. This was needed
due to usage of the incorrect device to perform the DMA mapping in
drivers. Now that this has been fixed, drop the properties.
This effectively reverts commits be08d278eb09 ("ARM: dts: bcm283x: Add
cells encoding format to firmware bus") and 55c7c0621078 ("ARM: dts:
bcm283x: Fix vc4's firmware bus DMA limitations").
Signed-off-by: Laurent Pinchart <[email protected]>
Reviewed-by: Stefan Wahren <[email protected]>
Tested-by: Ivan T. Ivanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Florian Fainelli <[email protected]>
|
|
The vendor kernel used 950mA as the default. The same value works fine on
the mainline Linux kernel, and has been tested extensively under Maemo
Leste [1] and postmarketOS, who have been using it for a number of years.
[1] https://github.com/maemo-leste/n9xx-linux/commit/fbc4ce7a84e59215914a8981afe918002b191493
Signed-off-by: Arthur Demchenkov <[email protected]>
Signed-off-by: Sicelo A. Mhlongo <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
|
|
Add the dts for the Xperia Z3 smartphone which is based on Sony's
shinano platform, so at the moment there's little device-specific dts to
add on top of the common parts.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
In preparation for adding the Sony Xperia Z3 smartphone, split the
common parts into shinano-common.dtsi.
No functional change intended.
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
drop incorrect cpu-dai property, change it to ssi-controller
Signed-off-by: Shengjiu Wang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Commit 8f2ca252ee1f ("ARM: dts: imx6qdl-udoo: Disable USB host to
work around boot issues") disabled USB host to avoid boot hang.
Properly describe the USB2514 USB hub to fix this issue.
Tested on a imx6q-udoo board and verified that it boots fine
and USB host functionality works.
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Since commit 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint
property verification") the ov2680 no longer probes on a imx7s-warp7:
ov2680 1-0036: error -EINVAL: supported link freq 330000000 not found
ov2680 1-0036: probe with driver ov2680 failed with error -22
Fix it by passing the required 'link-frequencies' property as
recommended by:
https://www.kernel.org/doc/html/v6.9-rc1/driver-api/media/camera-sensor.html#handling-clocks
Cc: [email protected]
Fixes: 63b0cd30b78e ("media: ov2680: Add bus-cfg / endpoint property verification")
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
compatible must be qcom,idle-state-spc AND arm,idle-state.
Fixes: d468f825b3fd ("ARM: dts: qcom: msm8916: Add include for SMP without PSCI on ARM32")
Signed-off-by: David Heidelberg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Required for dt-schema validation.
Signed-off-by: David Heidelberg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
'no-emmc' is not a valid property.
The original intention was to use the 'no-mmc' property.
Change it accordingly to fix the following dt-schema warning:
imx7s-mba7.dtb: mmc@30b40000: Unevaluated properties are not allowed ('no-emmc' was unexpected)
Fixes: d430a7e0e181 ("ARM: dts: imx7-mba7: restrict usdhc interface modes")
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Alexander Stein <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Just like other i.MX devices, i.MX7 also supports using the SNVS
block to poweroff the chip.
Add an entry for it.
Signed-off-by: Fabio Estevam <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
GPIO4_IO20 is unused on MBA6x, unless LVDS display is attached.
Remove the pinctrl for GPIO4_IO20, so it can be used otherwise.
Signed-off-by: Alexander Stein <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
This adds vdd-supply powering the USB hub.
Signed-off-by: Alexander Stein <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Add support for Seed Stuidos NPi i.MX6ULL SoM equipped with
512MB RAM and 8GB eMMC or 512MB NAND flash. Development
board comes with either eMMC or NAND based SoM with peripheral
interfaces like 2 x ethernet, 2 x USB, LCD, CSI and more.
Signed-off-by: Parthiban Nallathambi <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Merge the patches that was picked up for v6.10 before v6.9-rc1 became
available onto v6.9-rc1 to reduce the risk for conflicts etc.
|
|
Add DT for the UNI-T UTi260B handheld thermal camera.
Reviewed-by: Stefan Wahren <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Set interrupt type to level low to correctly describe the hardware and
do not rely on the driver to do the right thing.
Signed-off-by: Andreas Kemnade <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|
|
Correctly describe the interrupt as level low. Driver enforces that
anyways, but do not rely on that in the devicetree.
Suggested-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Andreas Kemnade <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>
|