aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2024-06-24arm: dts: mediatek: Declare drive-strength numericallyAngeloGioacchino Del Regno2-10/+10
On some devicetrees, the drive-strength property gets assigned a MTK_DRIVE_(x)_mA definition, which matches with (x). For example, MTK_DRIVE_8mA equals to 8 and MTK_DRIVE_30mA equals to 30. Also keeping in mind that the drive-strength property is, by (binding) definition, taking a number in milliamperes unit, change all devicetrees to avoid the usage of any MTK_DRIVE_(x) definition. Reviewed-by: Chen-Yu Tsai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
2024-06-23ARM: dts: qcom: msm8974: Use mboxes in smsm nodeLuca Weiss1-3/+1
With the smsm bindings and driver finally supporting mboxes, switch to that and stop using apcs as syscon. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-23ARM: dts: qcom: msm8974-sony-shinano: increase load on l21 for sdhc2Valeriy Klimin1-0/+2
SD cards would exhibit errors similar to ones described in commit 27fe0fc05f35 ("ARM: dts: msm8974-FP2: Increase load on l20 for sdhci") This patch applies the same change to the regulator for sdhc2. Signed-off-by: Valeriy Klimin <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-23ARM: dts: qcom: Add Sony Xperia Z3 Compact smartphoneValeriy Klimin2-0/+45
Add the dts for the Z3 Compact. This is currently almost the same as the plain Z3 as they share almost the same hardware and nothing device-specific is currently supported. Signed-off-by: Valeriy Klimin <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-23ARM: dts: rockchip: Add SFC for RK3128Alex Bee1-0/+35
Add the Serial Flash Controller and it's pincontrols. Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] [reference HCLK_SFC by its numeric id to prevent conflicts with the clock binding/controller changes] Signed-off-by: Heiko Stuebner <[email protected]>
2024-06-23ARM: dts: qcom: use generic node names for Adreno and QFPROMKrzysztof Kozlowski5-8/+8
Use recommended generic node names for the Adreno GPU and QFPROM fused values device nodes. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-23ARM: dts: rockchip: add hdmi-sound node to rk3066aJohan Jonker1-0/+16
Add hdmi-sound node to rk3066a.dtsi, so that it can be reused by boards with HDMI support. Signed-off-by: Johan Jonker <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2024-06-23ARM: dts: rockchip: Add spdif node for RK3128Alex Bee1-0/+14
The SoC has a S/PDIF TX controller which is fully compatible with older generation Rockchip SoCs. Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2024-06-23ARM: dts: rockchip: Add i2s nodes for RK3128Alex Bee1-0/+27
RK3128 SoCs have two i2s controllers. i2s_8ch has 8 tx and 2 rx channels and is internally hard-wired to the hdmi-controller respectivly the SoC's analog codec. i2s_2ch has 2 tx and 2 rx channels and can also be used externally as it's pins are exposed though pinctrl. Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2024-06-23ARM: dts: rockchip: Add DSI for RK3128Alex Bee1-0/+37
Add the Designware MIPI DSI controller and it's port nodes. Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2024-06-23ARM: dts: rockchip: Add D-PHY for RK3128Alex Bee1-0/+14
The InnoSilicon D-PHY found in RK3128 SoCs supports DSI/LVDS/TTL with a maximum transfer rate of 1 Gbps per lane. While adding it, also add it's clocks to RK3128_PD_VIO powerdomain as the phy is part of it. Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2024-06-23arm: dts: aspeed: Use standard 'i2c' bus node nameRob Herring (Arm)3-44/+44
The standard node name for I2C buses is 'i2c'. Signed-off-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-23arm: dts: nuvoton: Use standard 'i2c' bus node nameRob Herring (Arm)2-22/+22
The standard node name for I2C buses is 'i2c'. Signed-off-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-23ARM: dts: nspire: Add full compatible for watchdog nodeAndrew Davis1-1/+4
The watchdog appears to be an ARM SP805, add the full compatible and the needed clocks properties. Leave this disabled for now as functionality is not fully tested. Signed-off-by: Andrew Davis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-23ARM: dts: nspire: Add unit name addresses to memory nodesAndrew Davis2-2/+2
Fixes the following DTB check warning: > node has a reg or ranges property, but no unit name Signed-off-by: Andrew Davis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-21ARM: dts: rockchip: rk3xxx: fix emac nodeJohan Jonker2-9/+2
In the combined DT of rk3066a/rk3188 the emac node uses as place holder the compatible string "snps,arc-emac". The last real user nSIM_700 of the "snps,arc-emac" compatible string in a driver was removed in 2019. Rockchip emac nodes don't make use of this common fall back string. In order to removed unused driver code replace this string with "rockchip,rk3066-emac". As we are there remove the blank lines and sort. Signed-off-by: Johan Jonker <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-06-17ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi nodeJohan Jonker1-0/+1
'#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, so add them to the 'hdmi' node for 'rk3066a.dtsi'. Fixes: fadc78062477 ("ARM: dts: rockchip: add rk3066 hdmi nodes") Signed-off-by: Johan Jonker <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2024-06-17ARM: dts: e60k02: fix aliases for mmcAndreas Kemnade1-0/+4
Since commit fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree alias") mmc numbering are changed, confusing boot scripts. Fix that by adding proper aliases Signed-off-by: Andreas Kemnade <[email protected]> Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15ARM: dts: imx: Add LVDS port data mapping on M53 MenloMarek Vasut1-0/+1
Describe LVDS data mapping of the LVDS-to-DPI decoder input port. This fixes a warning reported by lvds-codec driver: " lvds-codec lvds-decoder: missing 'data-mapping' DT property " Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting nodeLiu Ying2-3/+5
We cannot use /delete-node/ directive to delete a node in a DT overlay. The node won't be deleted effectively. Instead, set the node's status property to "disabled" to achieve something similar. Fixes: eeb403df953f ("ARM: dts: imx53-qsb: add support for the HDMI expander") Signed-off-by: Liu Ying <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15ARM: dts: imx28-tx28: drop redundant 'panel-name' propertyKrzysztof Kozlowski1-6/+0
Panel timing bindings do not allow 'panel-name' and there seems to be no users of it: neither Linux kernel drivers, nor U-boot as of v2024.07-rc2. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15ARM: dts: imx: drop redundant 'u-boot,panel-name' propertyKrzysztof Kozlowski2-9/+0
Panel timing bindings do not allow 'u-boot,panel-name' and there seems to be no users of it: neither Linux kernel drivers, nor U-boot as of v2024.07-rc2. Reported by dtbs_check: imx6qp-tx6qp-8037.dtb: display-timings: timing-et0700: 'u-boot,panel-name' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15ARM: dts: imx6dl-aristainetos2_4: drop redundant 'power-on-delay' propertyKrzysztof Kozlowski1-1/+0
LG4573 panel bindings do not allow 'power-on-delay' property. Linux driver does not use it, either. Reported by dtbs_check: imx6dl-aristainetos2_4.dtb: display@0: Unevaluated properties are not allowed ('power-on-delay' was unexpected) Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15ARM: dts: imx: correct choice of panel native modeKrzysztof Kozlowski6-6/+6
Bindings and Linux driver expect native-mode to be a phandle to one of the timings node, not a boolean property. Correct the DTS to fix dtbs_check warnings like: imx53-m53evk.dtb: display-timings: timing-800x480p60: 'native-mode' does not match any of the regexes: 'pinctrl-[0-9]+' This should not have actual effect for Linux kernel (no real bug affecting choice of native-mode), because the first timing node is chosen in absence of proper native-mode property. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-15ARM: dts: imx: align panel timings node name with dtschemaKrzysztof Kozlowski19-47/+47
DT schema expects panel timings node to follow certain pattern, dtbs_check warnings: imx6dl-gw54xx.dtb: display-timings: 'hsd100pxn1' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+' Linux drivers do not care about node name, so this should not have effect on Linux. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-12ARM: dts: qcom: motorola-falcon: add accelerometer, magnetometerStanislav Jakubek1-0/+53
Add the accelerometer and magnetometer that are present on the Motorola Moto G (2013) device. Signed-off-by: Stanislav Jakubek <[email protected]> Link: https://lore.kernel.org/r/ZmWMh6fuLasvGkR/@standask-GA-A55M-S2HP Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-12ARM: dts: cirrus: align panel timings node name with dtschemaKrzysztof Kozlowski1-1/+1
DT schema expects panel timings node to follow certain pattern. Linux drivers do not care about node name, so this should not have effect on Linux. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-12ARM: dts: vt8500: align panel timings node name with dtschemaKrzysztof Kozlowski4-4/+4
DT schema expects panel timings node to follow certain pattern, dtbs_check warnings: vt8500-bv07.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+' Linux drivers do not care about node name, so this should not have effect on Linux. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-12ARM: dts: vt8500: replace "uhci" nodename with generic name "usb"Mohammad Shehar Yaar Tausif5-7/+7
Replace "uhci" nodenames with "usb" as it's generic and aligns with the schema binding. Signed-off-by: Mohammad Shehar Yaar Tausif <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-10ARM: 9404/1: arm32: enable HAVE_LD_DEAD_CODE_DATA_ELIMINATIONYuntao Liu1-1/+1
The current arm32 architecture does not yet support the HAVE_LD_DEAD_CODE_DATA_ELIMINATION feature. arm32 is widely used in embedded scenarios, and enabling this feature would be beneficial for reducing the size of the kernel image. In order to make this work, we keep the necessary tables by annotating them with KEEP, also it requires further changes to linker script to KEEP some tables and wildcard compiler generated sections into the right place. When using ld.lld for linking, KEEP is not recognized within the OVERLAY command, and Ard proposed a concise method to solve this problem. It boots normally with defconfig, vexpress_defconfig and tinyconfig. The size comparison of zImage is as follows: defconfig vexpress_defconfig tinyconfig 5137712 5138024 424192 no dce 5032560 4997824 298384 dce 2.0% 2.7% 29.7% shrink When using smaller config file, there is a significant reduction in the size of the zImage. We also tested this patch on a commercially available single-board computer, and the comparison is as follows: a15eb_config 2161384 no dce 2092240 dce 3.2% shrink The zImage size has been reduced by approximately 3.2%, which is 70KB on 2.1M. Signed-off-by: Yuntao Liu <[email protected]> Tested-by: Arnd Bergmann <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]>
2024-06-05ARM: dts: qcom: Add initial support for HTC One (M8)Alexandre Messier2-0/+354
Add initial device tree for the HTC One (M8) smartphone. Initial support includes: - eMMC - Power button - USB - Vibrator - Volume buttons (GPIO) - Wi-Fi Signed-off-by: Alexandre Messier <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-05ARM: dts: stm32: osd32: move pwr_regulators to commonSean Nyekjaer3-10/+5
According to the OSD32MP1 Power System overview[1] pwr_regulators; vdd-supply and vdd_3v3_usbfs-supply are hard-wired internally in the SIP module to vdd and ldo4. [1]: https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections Signed-off-by: Sean Nyekjaer <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2024-06-05ARM: dts: stm32: osd32: move usb phy power to commonSean Nyekjaer3-16/+8
According to the OSD32MP1 Power System overview[1] usb phy power is hard-wired internally in the SIP module to ldo4. [1]: https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections Signed-off-by: Sean Nyekjaer <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2024-06-05ARM: dts: stm32: Add arm,no-tick-in-suspend to STM32MP15xx STGEN timerMarek Vasut1-0/+1
STM32MP15xx RM0436 Rev 6 section 46.3 System timer generator (STGEN) states " Arm recommends that the system counter is in an always-on power domain. This is not supported in the current implementation, therefore STGEN should be saved and restored before Standby mode entry, and restored at Standby exit by secure software. ... " Instead of piling up workarounds in the firmware which is difficult to update, add "arm,no-tick-in-suspend" DT property into the timer node to indicate the timer is stopped in suspend, and let the kernel fix the timer up. Fixes: 8471a20253eb ("ARM: dts: stm32: add stm32mp157c initial support") Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2024-06-05ARM: dts: stm32: add goodix touchscreen on stm32mp135f-dkYannick Fertre2-0/+36
Touchscreen reset needs to be configured via the pinctrl not the driver (a pull-down resistor has been soldered onto the reset line which forces the touchscreen to reset state). Interrupt line must have a pull-down resistor in order to freeze the i2c address at 0x5D. Signed-off-by: Yannick Fertre <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2024-06-05ARM: dts: stm32: enable camera support on stm32mp135f-dk boardAlain Volmat1-0/+87
On STM32MP135F-DK board the camera support is made of the CSI based GC2145 sensor, connected to the ST-MIPID02 CSI to parallel bridge, connected to the DCMIPP parallel input. Signed-off-by: Alain Volmat <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2024-06-05ARM: dts: stm32: add DCMIPP pinctrl on STM32MP13x SoC familyAlain Volmat1-0/+33
Adds DCMIPP pinctrl support and assigns dedicated GPIO pins. Signed-off-by: Alain Volmat <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2024-06-04ARM: dts: qcom: msm8974: Use mboxes properties for APCSLuca Weiss1-7/+7
Instead of passing the syscon to the various nodes, use the mbox interface using the mboxes property. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-03ARM: dts: sunxi: remove duplicated entries in makefilePavel Löbl1-62/+0
During introduction of DTS vendor subdirectories in 724ba6751532, sun8i section of the makefile got duplicated. Clean that up. Fixes: 724ba6751532 ("ARM: dts: Move .dts files to vendor sub-directories") Signed-off-by: Pavel Löbl <[email protected]> Reviewed-by: Jernej Skrabec <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Chen-Yu Tsai <[email protected]>
2024-05-31ARM: dts: qcom: mdm9615: drop #power-domain-cells property of GCCDmitry Baryshkov1-1/+0
On MDM9615 the Global Clock Controller (GCC) doesn't provide power domains. Drop the #power-domain-cells property from the controller device node. Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-31ARM: dts: qcom: ipq8064: drop #power-domain-cells property of GCCDmitry Baryshkov1-1/+0
On IPQ8064 the Global Clock Controller (GCC) doesn't provide power domains. Drop the #power-domain-cells property from the controller device node. Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-31ARM: dts: qcom: ipq4019: drop #power-domain-cells property of GCCDmitry Baryshkov1-1/+0
On IPQ4019 the Global Clock Controller (GCC) doesn't provide power domains. Drop the #power-domain-cells property from the controller device node. Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-31ARM: dts: qcom: msm8960: drop #power-domain-cells property of GCCDmitry Baryshkov1-1/+0
On MSM8960 the Global Clock Controller (GCC) doesn't provide power domains. Drop the #power-domain-cells property from the controller device node. Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-31ARM: dts: qcom: msm8660: drop #power-domain-cells property of GCCDmitry Baryshkov1-1/+0
On MSM8660 the Global Clock Controller (GCC) doesn't provide power domains. Drop the #power-domain-cells property from the controller device node. Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-31ARM: dts: qcom: apq8064: drop #power-domain-cells property of GCCDmitry Baryshkov1-1/+0
On APQ8064 the Global Clock Controller (GCC) doesn't provide power domains. Drop the #power-domain-cells property from the controller device node. Signed-off-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-28ARM: dts: qcom: msm8974: Use proper compatible for APCS sysconLuca Weiss1-2/+4
Use the apcs-kpss-global compatible for the APCS global mailbox block found on this SoC. This also resolves a dt-binding checker warning: arch/arm/boot/dts/qcom/qcom-msm8974pro-fairphone-fp2.dtb: syscon@f9011000: compatible: 'anyOf' conditional failed, one must be fixed: ['syscon'] is too short 'syscon' is not one of ['allwinner,sun8i-a83t-system-controller', 'allwinner,sun8i-h3-system-controller', 'allwinner,sun8i-v3s-system-controller', 'allwinner,sun50i-a64-system-controller', 'amd,pensando-elba-syscon', 'brcm,cru-clkset', 'freecom,fsg-cs2-system-controller', 'fsl,imx93-aonmix-ns-syscfg', 'fsl,imx93-wakeupmix-syscfg', 'hisilicon,dsa-subctrl', 'hisilicon,hi6220-sramctrl', 'hisilicon,pcie-sas-subctrl', 'hisilicon,peri-subctrl', 'hpe,gxp-sysreg', 'intel,lgm-syscon', 'loongson,ls1b-syscon', 'loongson,ls1c-syscon', 'marvell,armada-3700-usb2-host-misc', 'mediatek,mt8135-pctl-a-syscfg', 'mediatek,mt8135-pctl-b-syscfg', 'mediatek,mt8365-syscfg', 'microchip,lan966x-cpu-syscon', 'microchip,sparx5-cpu-syscon', 'mstar,msc313-pmsleep', 'nuvoton,ma35d1-sys', 'nuvoton,wpcm450-shm', 'rockchip,px30-qos', 'rockchip,rk3036-qos', 'rockchip,rk3066-qos', 'rockchip,rk3128-qos', 'rockchip,rk3228-qos', 'rockchip,rk3288-qos', 'rockchip,rk3368-qos', 'rockchip,rk3399-qos', 'rockchip,rk356 8-qos', 'rockchip,rk3588-qos', 'rockchip,rv1126-qos', 'starfive,jh7100-sysmain', 'ti,am62-usb-phy-ctrl', 'ti,am654-dss-oldi-io-ctrl', 'ti,am654-serdes-ctrl', 'ti,j784s4-pcie-ctrl'] from schema $id: http://devicetree.org/schemas/mfd/syscon.yaml# Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-28ARM: dts: qcom: msm8974-hammerhead: Update gpio hog node nameLuca Weiss1-1/+1
Follow the gpio-hog bindings and use otg-hog as node name. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-28ARM: dts: renesas: r9a06g032: Describe GMAC1Clément Léger1-0/+18
The r9a06g032 SoC of the RZ/N1 family features two GMAC devices named GMAC1/2, that are based on Synopsys cores. GMAC1 is connected to a RGMII/RMII converter that is already described in this device tree. Signed-off-by: Clément Léger <[email protected]> [rgantois: commit log] Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Romain Gantois <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2024-05-27ARM: dts: qcom: msm8974: Add Samsung Galaxy Note 3Adam Honse2-0/+402
Add the devicetree for this "phablet" using the Snapdragon 800 SoC. Signed-off-by: Adam Honse <[email protected]> [[email protected]: clean up, prepare for upstream] Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-05-27ARM: dts: qcom: msm8974-hammerhead: Hook up backlightLuca Weiss1-1/+3
Connect the panel with the backlight nodes so that the backlight can be turned off when the display is blanked. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.