aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2024-07-05ARM: dts: marvell: orion: align GPIO keys node name with bindingsKrzysztof Kozlowski5-10/+13
Bindings expect the GPIO key node names to follow certain pattern, see dtbs_check warnings: orion5x-lacie-d2-network.dtb: gpio-keys: 'front_button', 'power_rocker_sw_off', 'power_rocker_sw_on' do not match any of the regexes: '^(button|event|key|switch| ... Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2024-07-05ARM: dts: marvell: kirkwood: align LED node name with bindingsKrzysztof Kozlowski30-157/+157
Bindings expect the LED node names to follow certain pattern, see dtbs_check warnings: kirkwood-ds409slim.dtb: gpio-leds-alarm-12: 'hdd1-green' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2024-07-05ARM: dts: marvell: kirkwood: drop incorrect address/size-cells in GPIO keysKrzysztof Kozlowski21-42/+0
Bindings do not allow address/size-cells in GPIO keys and the GPIO keys is not a bus, see dtbs_check warnings: kirkwood-openblocks_a7.dtb: gpio_keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)... Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2024-07-05ARM: dts: marvell: kirkwood: align GPIO keys node name with bindingsKrzysztof Kozlowski23-47/+47
Bindings expect the GPIO key node names to follow certain pattern, see dtbs_check warnings: kirkwood-laplug.dtb: gpio_keys: 'power' does not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)... Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2024-07-05ARM: dts: armada-{370-xp,375,38x,39x}: Drop #size-cells from mpic nodeMarek Behún4-4/+0
The marvell,mpic interrupt controller has no children nodes. Drop the Signed-off-by: Marek Behún <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2024-07-05ARM: dts: marvell: Add 7-segment LED display on x530Chris Packham1-1/+12
The Allied Telesis x530 products have a 7-segment LED display which is used for node identification when the devices are stacked. Represent this as a gpio-7-segment device. Signed-off-by: Chris Packham <[email protected]> Acked-by: Gregory CLEMENT <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2024-07-05ARM: dts: stm32: Missing clocks for stm32f429's syscfg.Yanjun Yang1-0/+1
Without clock definition, SYSCFG will not work, EXTI interrupt for port other than GPIOA will fail to operate. Signed-off-by: Yanjun Yang <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2024-07-05ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC boardMarek Vasut3-0/+630
This stm32mp135f-dhcor-dhsbc board is a stack of DHCOR SoM based on STM32MP135F SoC (900MHz / crypto capabilities) populated on DHSBC carrier board. The SoM contains the following peripherals: - STPMIC (power delivery) - 512MB DDR3L memory - eMMC and SDIO WiFi module The DHSBC carrier board contains the following peripherals: - Two RGMII Ethernet ports - USB-A Host port, USB-C peripheral port, USB-C power supply plug - Expansion connector Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2024-07-05ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM ↵Marek Vasut1-0/+483
and DHSBC board Add new pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board. The following pinmux nodes are added: - ADC pins - ADC CC pins - ETH1 pins - ETH2 pins - I2C5 pins - MCAN1 pins - MCAN2 pins - PWM13 pins - PWM5 pins - QSPI pins - SAI1 pins - SDMMC2 D4..D7 pins - SPI2 pins - SPI3 pins - UART4 pins - UART7 pins - USART1 pins - USART2 pins Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2024-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/aquantia/aquantia.h 219343755eae ("net: phy: aquantia: add missing include guards") 61578f679378 ("net: phy: aquantia: add support for PHY LEDs") drivers/net/ethernet/wangxun/libwx/wx_hw.c bd07a9817846 ("net: txgbe: remove separate irq request for MSI and INTx") b501d261a5b3 ("net: txgbe: add FDIR ATR support") https://lore.kernel.org/all/[email protected]/ include/linux/mlx5/mlx5_ifc.h 048a403648fc ("net/mlx5: IFC updates for changing max EQs") 99be56171fa9 ("net/mlx5e: SHAMPO, Re-enable HW-GRO") https://lore.kernel.org/all/[email protected]/ Adjacent changes: drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c 4130c67cd123 ("wifi: iwlwifi: mvm: check vif for NULL/ERR_PTR before dereference") 3f3126515fbe ("wifi: iwlwifi: mvm: add mvm-specific guard") include/net/mac80211.h 816c6bec09ed ("wifi: mac80211: fix BSS_CHANGED_UNSOL_BCAST_PROBE_RESP") 5a009b42e041 ("wifi: mac80211: track changes in AP's TPE") Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-04ARM: dts: rockchip: Drop ethernet-phy-ieee802.3-c22 from PHY compatible ↵Marek Vasut1-2/+1
string on edgeble-neu2 The rtl82xx DT bindings do not require ethernet-phy-ieee802.3-c22 as the fallback compatible string. There are fewer users of the Realtek PHY compatible string with fallback compatible string than there are users without fallback compatible string, so drop the fallback compatible string from the few remaining users: $ git grep -ho ethernet-phy-id001c....... | sort | uniq -c 1 ethernet-phy-id001c.c816", 2 ethernet-phy-id001c.c915", 2 ethernet-phy-id001c.c915"; 5 ethernet-phy-id001c.c916", 13 ethernet-phy-id001c.c916"; Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Marek Vasut <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2024-07-02ARM: dts: qcom: qcom-msm8226-samsung-ms013g: Add initial device treeRaymond Hackley2-0/+387
Samsung Galaxy Grand 2 is a phone based on MSM8226. It's similar to the other Samsung devices based on MSM8226 with only a few minor differences. The device trees contain initial support with: - GPIO keys - Regulator haptic - SDHCI (internal and external storage) - UART (on USB connector via the TI TSU6721 MUIC) - Regulators - Touchscreen - Accelerometer Signed-off-by: Raymond Hackley <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-02ARM: 9407/1: Add support for STACKLEAK gcc pluginJinjie Ruan1-0/+1
Add the STACKLEAK gcc plugin to arm32 by adding the helper used by stackleak common code: on_thread_stack(). It initialize the stack with the poison value before returning from system calls which improves the kernel security. Additionally, this disables the plugin in EFI stub code and decompress code, which are out of scope for the protection. Before the test on Qemu versatilepb board: # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT lkdtm: Performing direct entry STACKLEAK_ERASING lkdtm: XFAIL: stackleak is not supported on this arch (HAVE_ARCH_STACKLEAK=n) After: # echo STACKLEAK_ERASING > /sys/kernel/debug/provoke-crash/DIRECT lkdtm: Performing direct entry STACKLEAK_ERASING lkdtm: stackleak stack usage: high offset: 80 bytes current: 280 bytes lowest: 696 bytes tracked: 696 bytes untracked: 192 bytes poisoned: 7220 bytes low offset: 4 bytes lkdtm: OK: the rest of the thread stack is properly erased Signed-off-by: Jinjie Ruan <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Russell King (Oracle) <[email protected]>
2024-07-01ARM: dts: qcom: apq8064: drop incorrect ranges from QFPROMKrzysztof Kozlowski1-1/+1
There is no direct mapping between QFPROM children and parent/SoC MMIO bus, so 'ranges' property is not correct. Pointed by dtbs_check: qcom-apq8064-cm-qs600.dtb: efuse@700000: Unevaluated properties are not allowed ('ranges' was unexpected) Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-01arm/arm64: dts: arm: Use generic clock and regulator nodenamesRob Herring (Arm)16-79/+79
With the recent defining of preferred naming for fixed clock and regulator nodes, convert the Arm Ltd. boards to use the preferred names. In the cases which had a unit-address, warnings about missing "reg" property are fixed. Signed-off-by: Rob Herring (Arm) <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Sudeep Holla <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-01ARM: dts: turris-omnia: Add GPIO key node for front buttonMarek Behún1-0/+13
Now that we have the MCU device-tree node, which acts as a GPIO controller, add GPIO key node for the front button. Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Acked-by: Bartosz Golaszewski <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-01ARM: dts: turris-omnia: Add MCU system-controller nodeMarek Behún1-1/+21
Turris Omnia's MCU provides various features that can be configured over I2C at address 0x2a. Add device-tree node. This does not carry a Fixes tag - we do not want this to get backported to stable kernels for the following reason: U-Boot since v2022.10 inserts a phy-reset-gpio property into the WAN ethernet node pointing to the MCU node if it finds the MCU node with a cznic,turris-omnia-mcu compatible. Thus if this change got backported to a stable kernel, the WAN interface driver would defer probe indefinitely (since it would wait for the turris-omnia-mcu driver which would not be present). Signed-off-by: Marek Behún <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Acked-by: Bartosz Golaszewski <[email protected]> Acked-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-01Merge tag 'renesas-dts-for-v6.11-tag2-v2' of ↵Arnd Bergmann12-0/+12
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt * tag 'renesas-dts-for-v6.11-tag2-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a779h0: R-Car Sound support arm64: dts: renesas: r8a779g0: Tidy up sound DT settings arm64: dts: renesas: Add interrupt-names to arch timer nodes ARM: dts: renesas: Add interrupt-names to arch timer nodes arm64: dts: renesas: r9a08g045: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r9a07g054: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r9a07g044: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r9a07g043u: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779g0: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779f0: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779a0: Add missing hypervisor virtual timer IRQ arm64: dts: renesas: r8a779h0: Drop "opp-shared" from opp-table-0 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-01Merge tag 'v6.10-rockchip-dtsfixes1' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Apart from the regular dts fixes for wrong addresses, missing or wrong properties, this reverts the previous move away from cd-gpios to the mmc-controller's internal card-detect. With this change applied, it was reported that boards could not detect card anymore, so this go reverted of course. * tag 'v6.10-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add sound-dai-cells for RK3368 arm64: dts: rockchip: Fix the i2c address of es8316 on Cool Pi 4B arm64: dts: rockchip: fix PMIC interrupt pin on ROCK Pi E arm64: dts: rockchip: make poweroff(8) work on Radxa ROCK 5A Revert "arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes" ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node arm64: dts: rockchip: Fix the value of `dlg,jack-det-rate` mismatch on rk3399-gru arm64: dts: rockchip: set correct pwm0 pinctrl on rk3588-tiger arm64: dts: rockchip: Rename LED related pinctrl nodes on rk3308-rock-pi-s arm64: dts: rockchip: Fix SD NAND and eMMC init on rk3308-rock-pi-s arm64: dts: rockchip: Fix rk3308 codec@ff560000 reset-names arm64: dts: rockchip: Fix the DCDC_REG2 minimum voltage on Quartz64 Model B Link: https://lore.kernel.org/r/10237789.nnTZe4vzsl@diego Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-01ARM: dts: renesas: Add interrupt-names to arch timer nodesGeert Uytterhoeven12-0/+12
Add interrupt-names properties to device nodes that represent ARM architected timers for clarity. Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/b964e2f916cc23b6272e158c7b24597c971a82a5.1718890849.git.geert+renesas@glider.be
2024-06-28Merge tag 'v6.11-rockchip-dts32-1' of ↵Arnd Bergmann4-0/+153
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt More attention for the rk3128 soc (dsi, i2c, spdif, sfc), hdmi-sound for a rk3066a board and some minor cleanups. * tag 'v6.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: add #sound-dai-cells to hdmi node on rk3128 ARM: dts: rockchip: add #sound-dai-cells to hdmi node no rk3036 ARM: dts: rockchip: enable hdmi_sound and i2s0 for mk808 hdmi ARM: dts: rockchip: Add SFC for RK3128 ARM: dts: rockchip: add hdmi-sound node to rk3066a ARM: dts: rockchip: Add spdif node for RK3128 ARM: dts: rockchip: Add i2s nodes for RK3128 ARM: dts: rockchip: Add DSI for RK3128 ARM: dts: rockchip: Add D-PHY for RK3128 dt-bindings: clock: rk3128: Add PCLK_MIPIPHY Link: https://lore.kernel.org/r/2187283.irdbgypaU6@diego Signed-off-by: Arnd Bergmann <[email protected]>
2024-06-28Merge tag 'mtk-dts32-for-v6.11' of ↵Arnd Bergmann2-10/+10
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt MediaTek ARM32 DTS updates for v6.11 This adds a single commit that cleans up the drive-strength value assignment on all devicetrees using the deprecated MTK_DRIVE_(x)mA definition. * tag 'mtk-dts32-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: arm: dts: mediatek: Declare drive-strength numerically Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-06-28Merge tag 'sti-dt-for-v6.11-round1' of ↵Arnd Bergmann3-5/+44
https://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into soc/dt STi DT for v6.11 : _ Add #thermal-sensor-cells property on stih410.dtsi and stih418.dtsi _ Add thermal-zones support on stih418 _
2024-06-28arm: dts: arm: Drop redundant fixed-factor clocksRob Herring6-198/+6
There's not much reason to have multiple fixed-factor-clock instances which are all the same factor and clock input. Drop the nodes, but keep the labels to minimize the changes and keep some distinction of the different clocks. Signed-off-by: Rob Herring (Arm) <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-06-28ARM: dts: armada-{370-xp,375,38x,39x}: Drop #size-cells from mpic nodeMarek Behún4-4/+0
The marvell,mpic interrupt controller has no children nodes. Drop the Signed-off-by: Marek Behún <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-06-28ARM: dts: sti: add thermal-zones support on stih418Raphael Gallais-Pou2-5/+42
Add a 'thermal-zones' node for stih418. A thermal-zone needs three components: - thermal sensors, described in an earlier commit[1] - cooling devices, specified for each CPU - a thermal zone, describing the overall behavior. The thermal zone needs references to both CPUs and thermal sensors, which phandle are also added. The thermal management will then be achieved on CPUs using the cpufreq framework. [1] https://lore.kernel.org/lkml/[email protected]/ Reviewed-by: Patrice Chotard <[email protected]> Signed-off-by: Raphael Gallais-Pou <[email protected]> Signed-off-by: Patrice Chotard <[email protected]>
2024-06-28ARM: dts: st: add thermal property on stih410.dtsi and stih418.dtsiRaphael Gallais-Pou2-0/+2
"#thermal-sensor-cells" is required and missing in thermal nodes. Add it. Signed-off-by: Raphael Gallais-Pou <[email protected]> Reviewed-by: Patrice Chotard <[email protected]> Signed-off-by: Patrice Chotard <[email protected]>
2024-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-3/+5
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling") d9c04209990b ("ionic: Mark error paths in the data path as unlikely") Signed-off-by: Jakub Kicinski <[email protected]>
2024-06-27ARM: dts: rockchip: add #sound-dai-cells to hdmi node on rk3128Johan Jonker1-0/+1
'#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, so add them to the 'hdmi' node for 'rk3128.dtsi'. Signed-off-by: Johan Jonker <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2024-06-27ARM: dts: rockchip: add #sound-dai-cells to hdmi node no rk3036Johan Jonker1-0/+1
'#sound-dai-cells' is required to properly interpret the list of DAI specified in the 'sound-dai' property, so add them to the 'hdmi' node for 'rk3036.dtsi'. Signed-off-by: Johan Jonker <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2024-06-27Merge tag 'renesas-dts-for-v6.11-tag1' of ↵Arnd Bergmann1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.11 - Add support for the second and third Ethernet interfaces on the White Hawk development board, - Add support for the second Ethernet interface on the RZ/N1 SoC, - Add I2C EEPROM support for the Condor-I development board, - Add video capture support for the R-Car V4M SoC, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a779h0: Add video capture nodes arm64: dts: renesas: r9a08g045: Update fallback string for SDHI nodes arm64: dts: renesas: rzg2l: Update fallback string for SDHI nodes arm64: dts: renesas: r9a09g011: Update fallback string for SDHI nodes arm64: dts: renesas: s4sk: Add aliases for I2C buses arm64: dts: renesas: spider-cpu: Add aliases for I2C buses arm64: dts: renesas: white-hawk-cpu: Add aliases for I2C buses arm64: dts: renesas: condor-i: Add I2C EEPROM arm64: dts: renesas: gray-hawk-single: Add aliases for I2C buses ARM: dts: renesas: r9a06g032: Describe GMAC1 arm64: dts: renesas: white-hawk: ethernet: Describe AVB1 and AVB2 arm64: dts: renesas: r8a779g0: Use MDIO node for all AVB devices Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: add actual device treesMichael Walle4-0/+174
For now, there wasn't any in-tree users of the dtsi files for the Kontron SMARC-sAMX6i board. Let's add device trees, for this board on a Kontron SMARC Eval 2.0 Carrier. Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: remove wake-up-gpio propertyMichael Walle1-1/+0
Remove the "wake-up-gpio" property within the PCIe controller node. There is no such property, thus just remove it. This will also make the schema validation happy. Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix PCIe reset polarityMichael Walle1-1/+1
The PCIe reset line is active low. Fix it. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix node namesMichael Walle1-7/+7
Rename the nodes according to the schema. In particular, rename the bit bang I2C controller to "i2c-N" and the mux nodes of the audmux to "mux-*". While at it, fix the typo "adu", which should have been "aud". Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: add SDIO_PWR_EN supportMichael Walle1-1/+19
The module can enable/disable the SD card power supply and has it's dedicated pin SDIO_PWR_EN for that reason. This is esp. useful to be able to reset the SD card if it was in an UHS mode. Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: always enable eMMCMichael Walle1-1/+1
There are no variants of this module without an eMMC. Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix product nameMichael Walle2-2/+2
The correct name of the product is "Kontron SMARC-sAMX6i". See also https://www.kontron.com/en/products/smarc-samx6i/p89810 Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix SPI0 chip selectsMichael Walle2-24/+4
There is a comment in the imx6q variant dtsi claiming that these modules will have one more chip select than the imx6dl variant. This is wrong. Ordinary GPIOs are used for chip selects and both variants of the module share the very same PCB and both have this GPIO routed to the SPI0_CS1# pin of the SMARC connector. Fix it by moving the third chip select description to the common dtsi. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: cleanup the PMIC nodeMichael Walle1-6/+1
Remove the comment, remove the unused phandle name for the VGEN5 output. VGEN5 is not used at all. Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix board resetMichael Walle1-0/+1
On i.MX6 the board is reset by the watchdog. But in turn to do a complete board reset, we have to assert the WDOG_B output which is routed also to the CPLD which then do a complete power-cycle of the board. Fixes: 2125212785c9 ("ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support") Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix PHY resetMichael Walle1-2/+2
The PHY reset line is connected to both the SoC (GPIO1_25) and the CPLD. We must not use the GPIO1_25 as it will drive against the output buffer of the CPLD. Instead there is another GPIO (GPIO2_01), an input to the CPLD, which will tell the CPLD to assert the PHY reset line. Fixes: 2a51f9dae13d ("ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module") Fixes: 5694eed98cca ("ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node") Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: imx6qdl-kontron-samx6i: fix phy-modeMichael Walle1-1/+1
The i.MX6 cannot add any RGMII delays. The PHY has to add both the RX and TX delays on the RGMII interface. Fix the interface mode. While at it, use the new phy-connection-type property name. Fixes: 5694eed98cca ("ARM: dts: imx6qdl-kontron-samx6i: move phy reset into phy-node") Signed-off-by: Michael Walle <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-27ARM: dts: nxp: imx6: convert NVMEM content to layout syntaxRafał Miłecki2-8/+16
Use cleaner (and non-deprecated) bindings syntax. See commit bd912c991d2e ("dt-bindings: nvmem: layouts: add fixed-layout") for details. Signed-off-by: Rafał Miłecki <[email protected]> Reviewed-by: Alexander Stein <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-06-26ARM: dts: omap am5729-beagleboneai: drop unneeded ti,enable-id-detectionKrzysztof Kozlowski1-1/+0
There is a ti,enable-id-detection property in the Extcon Palmas (extcon-palmas), but not in the Extcon USB GPIO binding and driver. Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-26ARM: dts: ti: align panel timings node name with dtschemaKrzysztof Kozlowski4-4/+4
DT schema expects panel timings node to follow certain pattern, dtbs_check warnings: am335x-pdu001.dtb: display-timings: '240x320p16' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+' Linux drivers do not care about node name, so this should not have effect on Linux. Acked-by: Bartosz Golaszewski <[email protected]> # For DaVinci Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2024-06-25ARM: dts: qcom: msm8926-motorola-peregrine: Add framebuffer suppliesAndré Apitzsch1-0/+24
Add regulators used by the framebuffer of Motorola Moto G 4G (2013). Signed-off-by: André Apitzsch <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25ARM: dts: qcom: msm8926-motorola-peregrine: Update temperature sensorAndré Apitzsch1-0/+12
Add alert interrupt for the temperature sensor of Motorola Moto G 4G (2013), although not used by the driver yet. Signed-off-by: André Apitzsch <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-25ARM: dts: qcom: msm8926-motorola-peregrine: Add accelerometer, magnetometer, ↵André Apitzsch1-0/+85
regulator Add the accelerometer, magnetometer and regulator that are present on the Motorola Moto G 4G (2013) device. Signed-off-by: André Apitzsch <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-06-24ARM: dts: rockchip: enable hdmi_sound and i2s0 for mk808 hdmiJohan Jonker1-0/+8
Enable the hdmi_sound node and add i2s0 as sound source for mk808 hdmi. Signed-off-by: Johan Jonker <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.