aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2021-10-23ARM: dts: qcom: fix flash node naming for RB3011David Heidelberg1-1/+1
rename node to comply with dt-schema Fix warning: arch/arm/boot/dts/qcom-ipq8064-rb3011.dt.yaml: s25fl016k@0: $nodename:0: 's25fl016k@0' does not match '^flash(@.*)?$' From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020204145.235050-1-david@ixit.cz
2021-10-23ARM: dts: qcom: correct mmc node namingDavid Heidelberg12-30/+30
MMC nodes has to be named mmc@ to comply with dt-bindings. Fix warnings as: arch/arm/boot/dts/qcom-msm8660-surf.dt.yaml: sdcc@12400000: $nodename:0: 'sdcc@12400000' does not match '^mmc(@.*)?$' From schema: Documentation/devicetree/bindings/mmc/arm,pl18x.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020201440.229196-1-david@ixit.cz
2021-10-23ARM: dts: qcom: fix memory and mdio nodes naming for RB3011David Heidelberg1-3/+3
Fixes warnings regarding to memory and mdio nodes and apply new naming following dt-schema. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020214741.261509-1-david@ixit.cz
2021-10-23ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dtsDavid Heidelberg2-2/+1
Version dk01.1-c1 didn't have compatible specified, which was causing dt-schema validation warnings. Remove duplicated and useless board compatible from dtsi between board and device. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211009193102.76852-2-david@ixit.cz
2021-10-23ARM: dts: qcom: apq8026-lg-lenok: rename board vendorLuca Weiss2-2/+2
In order to avoid having prefixes for multiple internal divisions of LG use the "lg" prefix instead of "lge". Fixes: ad3f04b7bef6 ("ARM: dts: qcom: Add support for LG G Watch R") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928203815.77175-2-luca@z3ntu.xyz
2021-10-23ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY nodeShawn Guo1-1/+0
'#clock-cells' is a required property of QMP PHY child node, not itself. Drop it to fix the dtbs_check warnings below. qcom-sdx55-t55.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' qcom-sdx55-mtp.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' qcom-sdx55-telit-fn980-tlb.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-11-shawn.guo@linaro.org
2021-10-23ARM: dts: qcom: mdm9615: fix memory node for Sierra Wireless WP8548David Heidelberg1-1/+1
Specify unit address for the memory node, to match the reg. Signed-off-by: David Heidelberg <david@ixit.cz> [bjorn: Rewrote commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020234431.298310-1-david@ixit.cz
2021-10-17ARM: dts: qcom-pma8084: add interrupt controller propertiesDmitry Baryshkov1-8/+2
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt controller properties ('interrupt-controller' and '#interrupt-cells'). The interrupts property is no longer needed so remove it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-24-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-pm8941: add interrupt controller propertiesDmitry Baryshkov1-8/+2
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt controller properties ('interrupt-controller' and '#interrupt-cells'). The interrupts property is no longer needed so remove it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-23-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-pm8841: add interrupt controller propertiesDmitry Baryshkov1-4/+2
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt controller properties ('interrupt-controller' and '#interrupt-cells'). The interrupts property is no longer needed so remove it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-22-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-msm8660: add interrupt controller propertiesDmitry Baryshkov1-14/+2
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt controller properties ('interrupt-controller' and '#interrupt-cells'). The interrupts property is no longer needed so remove it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-21-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-mdm9615: add interrupt controller propertiesDmitry Baryshkov1-7/+2
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt controller properties ('interrupt-controller' and '#interrupt-cells'). The interrupts property is no longer needed so remove it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-20-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-apq8064: add interrupt controller propertiesDmitry Baryshkov1-17/+4
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt controller properties ('interrupt-controller' and '#interrupt-cells'). The interrupts property is no longer needed so remove it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-19-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-apq8060-dragonboard: fix mpps state namesDmitry Baryshkov1-2/+2
The majority of device tree nodes for mpps use xxxx-state as pinctrl nodes. Change names of mpps pinctrl nodes for qcom-apq8060-dragonboard board to follow that pattern. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-10-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-mdm9615: add gpio-ranges to mpps node, fix its nameDmitry Baryshkov1-1/+2
Rename mpp node to mpps@50 (instead of mpp@50). Also add gpio-ranges property to mpps device tree nodes, adding the mapping between pinctrl and GPIO pins. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-9-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-pma8084: add gpio-ranges to mpps nodesDmitry Baryshkov1-0/+1
Add gpio-ranges property to mpps device tree nodes, adding the mapping between pinctrl and GPIO pins. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-8-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-pm8941: add gpio-ranges to mpps nodesDmitry Baryshkov1-0/+1
Add gpio-ranges property to mpps device tree nodes, adding the mapping between pinctrl and GPIO pins. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-7-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-pm8841: add gpio-ranges to mpps nodesDmitry Baryshkov1-0/+1
Add gpio-ranges property to mpps device tree nodes, adding the mapping between pinctrl and GPIO pins. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-6-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-msm8660: add gpio-ranges to mpps nodesDmitry Baryshkov1-0/+1
Add gpio-ranges property to mpps device tree nodes, adding the mapping between pinctrl and GPIO pins. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-5-dmitry.baryshkov@linaro.org
2021-10-17ARM: dts: qcom-apq8064: add gpio-ranges to mpps nodesDmitry Baryshkov1-0/+2
Add gpio-ranges property to mpps device tree nodes, adding the mapping between pinctrl and GPIO pins. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-4-dmitry.baryshkov@linaro.org
2021-10-16ARM: dts: qcom-apq8064: stop using legacy clock names for HDMIDmitry Baryshkov1-4/+4
Stop using legacy clock names (with _clk suffix) for HDMI and HDMI PHY device tree nodes. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211014214221.4173287-1-dmitry.baryshkov@linaro.org
2021-09-19ARM: dts: qcom: msm8974: Add xo_board reference clock to DSI0 PHYMarijn Suijten1-2/+2
According to YAML validation, and for a future patchset putting this xo_board reference clock to use as VCO reference parent, add the missing clock to dsi_phy0. Fixes: 5a9fc531f6ec ("ARM: dts: msm8974: add display support") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210830175739.143401-1-marijn.suijten@somainline.org
2021-09-19ARM: dts: qcom: fill secondary compatible for multiple boardsDavid Heidelberg5-5/+5
To comply with device-tree definition. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210909060343.9665-1-david@ixit.cz
2021-09-19ARM: dts: qcom: apq8064: adjust memory node according to specsDavid Heidelberg1-1/+1
Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210908172544.55666-1-david@ixit.cz
2021-09-19ARM: dts: qcom: apq8064: Convert adreno from legacy gpu-pwrlevels to opp-v2David Heidelberg1-6/+10
APQ8064 was last user of gpu-pwrlevels inside mainline tree, so convert it now. Tested on Nexus 7 2013, no functional changes. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210829133918.57780-3-david@ixit.cz
2021-09-13ARM: dts: qcom: Add support for LG G Watch RLuca Weiss2-0/+238
Add a device tree for the LG G Watch R smartwatch, manufactured by LG Electronics and based on the msm8226 platform (apq8026). Currently UART, internal storage, power button and touchscreen are supported. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> [bjorn: Moved "rpm_requests" before "sdhc", to keep things sorted] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210911232707.259615-9-luca@z3ntu.xyz
2021-09-13ARM: dts: qcom: Add pm8226 PMICLuca Weiss1-0/+27
The pm8226 is used with Qualcomm platforms, like msm8226. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210911232707.259615-6-luca@z3ntu.xyz
2021-09-13ARM: dts: qcom: msm8226: Add more SoC bitsLuca Weiss1-8/+255
Add nodes for sdhc, uart4, i2c, scm, smem, rpm-requests including dependencies. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> [bjorn: Moved other nodes before "soc" to keep things alphabetical] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210911232707.259615-5-luca@z3ntu.xyz
2021-09-09Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds2-13/+3
Pull ARM development updates from Russell King: - Rename "mod_init" and "mod_exit" so that initcall debug output is actually useful (Randy Dunlap) - Update maintainers entries for linux-arm-kernel to indicate it is moderated for non-subscribers (Randy Dunlap) - Move install rules to arch/arm/Makefile (Masahiro Yamada) - Drop unnecessary ARCH_NR_GPIOS definition (Linus Walleij) - Don't warn about atags_to_fdt() stack size (David Heidelberg) - Speed up unaligned copy_{from,to}_kernel_nofault (Arnd Bergmann) - Get rid of set_fs() usage (Arnd Bergmann) - Remove checks for GCC prior to v4.6 (Geert Uytterhoeven) * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9118/1: div64: Remove always-true __div64_const32_is_OK() duplicate ARM: 9117/1: asm-generic: div64: Remove always-true __div64_const32_is_OK() ARM: 9116/1: unified: Remove check for gcc < 4 ARM: 9110/1: oabi-compat: fix oabi epoll sparse warning ARM: 9113/1: uaccess: remove set_fs() implementation ARM: 9112/1: uaccess: add __{get,put}_kernel_nofault ARM: 9111/1: oabi-compat: rework fcntl64() emulation ARM: 9114/1: oabi-compat: rework sys_semtimedop emulation ARM: 9108/1: oabi-compat: rework epoll_wait/epoll_pwait emulation ARM: 9107/1: syscall: always store thread_info->abi_syscall ARM: 9109/1: oabi-compat: add epoll_pwait handler ARM: 9106/1: traps: use get_kernel_nofault instead of set_fs() ARM: 9115/1: mm/maccess: fix unaligned copy_{from,to}_kernel_nofault ARM: 9105/1: atags_to_fdt: don't warn about stack size ARM: 9103/1: Drop ARCH_NR_GPIOS definition ARM: 9102/1: move theinstall rules to arch/arm/Makefile ARM: 9100/1: MAINTAINERS: mark all linux-arm-kernel@infradead list as moderated ARM: 9099/1: crypto: rename 'mod_init' & 'mod_exit' functions to be module-specific
2021-09-08Merge tag 'pm-5.15-rc1-2' of ↵Linus Torvalds2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are mostly ARM cpufreq driver updates, including one new MediaTek driver that has just passed all of the reviews, with the addition of a revert of a recent intel_pstate commit, some core cpufreq changes and a DT-related update of the operating performance points (OPP) support code. Specifics: - Add new cpufreq driver for the MediaTek MT6779 platform called mediatek-hw along with corresponding DT bindings (Hector.Yuan). - Add DCVS interrupt support to the qcom-cpufreq-hw driver (Thara Gopinath). - Make the qcom-cpufreq-hw driver set the dvfs_possible_from_any_cpu policy flag (Taniya Das). - Blocklist more Qualcomm platforms in cpufreq-dt-platdev (Bjorn Andersson). - Make the vexpress cpufreq driver set the CPUFREQ_IS_COOLING_DEV flag (Viresh Kumar). - Add new cpufreq driver callback to allow drivers to register with the Energy Model in a consistent way and make several drivers use it (Viresh Kumar). - Change the remaining users of the .ready() cpufreq driver callback to move the code from it elsewhere and drop it from the cpufreq core (Viresh Kumar). - Revert recent intel_pstate change adding HWP guaranteed performance change notification support to it that led to problems, because the notification in question is triggered prematurely on some systems (Rafael Wysocki). - Convert the OPP DT bindings to DT schema and clean them up while at it (Rob Herring)" * tag 'pm-5.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) Revert "cpufreq: intel_pstate: Process HWP Guaranteed change notification" cpufreq: mediatek-hw: Add support for CPUFREQ HW cpufreq: Add of_perf_domain_get_sharing_cpumask dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW cpufreq: Remove ready() callback cpufreq: sh: Remove sh_cpufreq_cpu_ready() cpufreq: acpi: Remove acpi_cpufreq_cpu_ready() cpufreq: qcom-hw: Set dvfs_possible_from_any_cpu cpufreq driver flag cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support cpufreq: scmi: Use .register_em() to register with energy model cpufreq: vexpress: Use .register_em() to register with energy model cpufreq: scpi: Use .register_em() to register with energy model dt-bindings: opp: Convert to DT schema dt-bindings: Clean-up OPP binding node names in examples ARM: dts: omap: Drop references to opp.txt cpufreq: qcom-cpufreq-hw: Use .register_em() to register with energy model cpufreq: omap: Use .register_em() to register with energy model cpufreq: mediatek: Use .register_em() to register with energy model cpufreq: imx6q: Use .register_em() to register with energy model ...
2021-09-02Merge tag 'pinctrl-v5.15-1' of ↵Linus Torvalds2-1295/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.15 kernel cycle, no core changes at all this time, just driver work! New drivers: - New subdriver for Intel Keem Bay (an ARM-based SoC) - New subdriver for Qualcomm MDM9607 and SM6115 - New subdriver for ST Microelectronics STM32MP135 - New subdriver for Freescale i.MX8ULP ("Ultra Low Power") - New subdriver for Ingenic X2100 - Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO - Support Samsung Exynos850 - Support Renesas RZ/G2L Enhancements: - A major refactoring of the Rockchip driver, breaking part of it out to a separate GPIO driver in drivers/gpio - Pin bias support on Renesas r8a77995 - Add SCI pins support to Ingenic JZ4755 and JZ4760 - Mediatek device tree bindings converted to YAML" * tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits) pinctrl: renesas: Add RZ/G2L pin and gpio controller driver pinctrl: samsung: Add Exynos850 SoC specific data dt-bindings: pinctrl: samsung: Add Exynos850 doc MAINTAINERS: Add maintainers for amd-pinctrl driver pinctrl: Add Intel Keem Bay pinctrl driver dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments dt-bindings: mediatek: convert pinctrl to yaml arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl pinctrl: ingenic: Add .max_register in regmap_config pinctrl: ingenic: Fix bias config for X2000(E) pinctrl: ingenic: Fix incorrect pull up/down info pinctrl: Ingenic: Add pinctrl driver for X2100. dt-bindings: pinctrl: Add bindings for Ingenic X2100. pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760. pinctrl: Ingenic: Improve the code. ...
2021-09-01Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds223-1713/+14295
Pull ARM SoC DT updates from Arnd Bergmann: "As usual, the bulk of work in the SoC tree goes into DT files, this time with a roughly even split between 32-bit and 64-bit SoCs rather than the usual mostly 64-bit changes. New SoCs: - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit platform based on the older SAMA5 series. - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing phone SoCs. - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas SoCs. New boards: - Marvell CN913x reference boards - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert and Fuji server boards. - Snapdragon 665 based Sony Xperia 10II - Snapdragon MSM8916 based Xiaomi Redmi 2 - Snapdragon MSM8226 based Samsung Galaxy S3 Neo - NXP i.MX based 32-bit boards: - DHCOM based PicoITX - DHSOM based DRC0ỉ - SolidRun SolidSense - SKOV i.MX6 boards. - NXP i.MX based 64-bit boards: - Nitrogen8 SoM and MNT Reform2 - LS1088A based Traverse Ten64 - i.MX8M based GW7902. - NVIDIA Jetson TX2 NX Developer Kit - 4KOpen STiH418-b2264 development board - ux500 based Samsung phones: Gavini, Codina and Kyle - TI AM335x based Sancloud BBE Lite - ixp4xx dts files to replace all old board files Other changes: - Treewide fixes for dtc warnings - Rockchips i/o domain support - TI OMAP/AM3 CPSW switch driver support - Improved device support for allwinner, aspeed, qualcomm, NXP, nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti, OMAP and actions" * tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits) arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings ARM: dts: rockchip: Add SFC to RV1108 arm64: dts: marvell: armada-37xx: Extend PCIe MEM space ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board dt-bindings: vendor-prefixes: add Traverse Technologies arm64: dts: add device tree for Traverse Ten64 (LS1088A) arm64: dts: ls1088a: add missing PMU node arm64: dts: ls1088a: add internal PCS for DPMAC1 node ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards dt-bindings: vendor-prefixes: Add an entry for SKOV A/S arm64: dts: imx8mq-reform2: add sound support arm64: dts: imx8m: drop interrupt-affinity for pmu arm64: dts: imx8qxp: update pmu compatible arm64: dts: imx8mm: update pmu compatible ...
2021-09-01Merge tag 'drivers-5.15' of ↵Linus Torvalds2-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "These are updates for drivers that are tied to a particular SoC, including the correspondig device tree bindings: - A couple of reset controller changes for unisoc, uniphier, renesas and zte platforms - memory controller driver fixes for omap and tegra - Rockchip io domain driver updates - Lots of updates for qualcomm platforms, mostly touching their firmware and power management drivers - Tegra FUSE and firmware driver updateѕ - Support for virtio transports in the SCMI firmware framework - cleanup of ixp4xx drivers, towards enabling multiplatform support and bringing it up to date with modern platforms - Minor updates for keystone, mediatek, omap, renesas" * tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits) reset: simple: remove ZTE details in Kconfig help soc: rockchip: io-domain: Remove unneeded semicolon soc: rockchip: io-domain: add rk3568 support dt-bindings: power: add rk3568-pmu-io-domain support bus: ixp4xx: return on error in ixp4xx_exp_probe() soc: renesas: Prefer memcpy() over strcpy() firmware: tegra: Stop using seq_get_buf() soc/tegra: fuse: Enable fuse clock on suspend for Tegra124 soc/tegra: fuse: Add runtime PM support soc/tegra: fuse: Clear fuse->clk on driver probe failure soc/tegra: pmc: Prevent racing with cpuilde driver soc/tegra: bpmp: Remove unused including <linux/version.h> dt-bindings: soc: ti: pruss: Add dma-coherent property soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs firmware: arm_scmi: Use WARN_ON() to check configured transports firmware: arm_scmi: Fix boolconv.cocci warnings soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing soc: mediatek: mmsys: add MT8365 support ...
2021-09-01Merge tag 'char-misc-5.15-rc1' of ↵Linus Torvalds1-10/+13
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char/misc driver changes for 5.15-rc1. Lots of different driver subsystems are being updated in here, notably: - mhi subsystem update - fpga subsystem update - coresight/hwtracing subsystem update - interconnect subsystem update - nvmem subsystem update - parport drivers update - phy subsystem update - soundwire subsystem update and there are some other char/misc drivers being updated as well: - binder driver additions - new misc drivers - lkdtm driver updates - mei driver updates - sram driver updates - other minor driver updates. Note, there are no habanalabs driver updates in this pull request, that will probably come later before -rc1 is out in a different request. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits) Revert "bus: mhi: Add inbound buffers allocation flag" misc/pvpanic: fix set driver data VMCI: fix NULL pointer dereference when unmapping queue pair char: mware: fix returnvar.cocci warnings parport: remove non-zero check on count soundwire: cadence: do not extend reset delay soundwire: intel: conditionally exit clock stop mode on system suspend soundwire: intel: skip suspend/resume/wake when link was not started soundwire: intel: fix potential race condition during power down phy: qcom-qmp: Add support for SM6115 UFS phy dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings phy: qmp: Provide unique clock names for DP clocks lkdtm: remove IDE_CORE_CP crashpoint lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ coresight: Replace deprecated CPU-hotplug functions. Documentation: coresight: Add documentation for CoreSight config coresight: syscfg: Add initial configfs support coresight: config: Add preloaded configurations coresight: etm4x: Add complex configuration handlers to etmv4 coresight: etm-perf: Update to activate selected configuration ...
2021-08-31Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki2-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull operating performance points (OPP) framework changes for v5.15 from Viresh Kumar: "This moves the OPP bindings to DT schema (Rob Herring)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: dt-bindings: opp: Convert to DT schema dt-bindings: Clean-up OPP binding node names in examples ARM: dts: omap: Drop references to opp.txt
2021-08-26arm/arm64: dts: Fix remaining dtc 'unit_address_format' warningsRob Herring20-79/+79
Fix all the remaining dtc 'unit_address_format' warnings except for the ones related to 'register-bit-led'. For those, we need to decide on and document the node name. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210823165126.2320910-1-robh@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-26Merge tag 'zynq-dt-for-v5.15' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann2-0/+33
arm/dt ARM: dts: Zynq DT changes for v5.15 - Enable nand flash controller for ebaz4205 board * tag 'zynq-dt-for-v5.15' of https://github.com/Xilinx/linux-xlnx: ARM: dts: ebaz4205: enable NAND support ARM: dts: zynq: add NAND flash controller node Link: https://lore.kernel.org/r/f3dc69c8-8a22-e938-4ddf-b1052b8c1437@monstr.eu Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-26Merge tag 'v5.15-rockchip-dts32-1' of ↵Arnd Bergmann4-16/+62
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt io-domains for rk3188 and rv1108, sfc (flash) support fpr rv1108 and some cleanups. * tag 'v5.15-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add SFC to RV1108 ARM: dts: rockchip: add io-domains nodes to rv1108.dtsi ARM: dts: rockchip: add io-domains node to rk3188.dtsi ARM: dts: rockchip: remove interrupt-names from iommu nodes ARM: dts: rockchip: rename timer compatible strings for rk3066a ARM: dts: rockchip: add space after &grf on rk3188 ARM: dts: rockchip: rename pcfg_* nodenames for rk3066/rk3188 Link: https://lore.kernel.org/r/4142796.VLH7GnMWUR@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-23ARM: dts: omap: Drop references to opp.txtRob Herring2-2/+0
opp.txt is getting removed with the OPP binding converted to DT schema. As it is unusual to reference a binding doc from a dts file, let's just remove the reference. Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-08-18ARM: dts: rockchip: Add SFC to RV1108Chris Morgan1-0/+37
Add a devicetree entry for the Rockchip SFC for the RV1108 SOC. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Jon Lin <jon.lin@rock-chips.com> Link: https://lore.kernel.org/r/20210812134546.31340-5-jon.lin@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-08-18Merge tag 'aspeed-5.15-devicetree' of ↵Arnd Bergmann20-66/+2956
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 5.15 - New machines * Facebook's Cloudripper * Facebook's Elbert * Facebook's Fuji All three carry the description of "Facebook's next generation switch platform with an AST2600 BMC integrated for health monitoring purpose." They share a 128 MB SPI NOR flash layout that is also used by some older platforms. * Inspur's NF5280M6, an x86 platform server with an AST2500-based BMC - SGPIO updates including AST2600 support - GPIO descriptions for the IBM AST2600 machines - Pinctrl fix - Updates to Facebook's AST2500 based machines * tag 'aspeed-5.15-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (23 commits) ARM: dts: aspeed: p10bmc: Add power control pins ARM: dts: aspeed: cloudripper: Add comments for "mdio1" ARM: dts: aspeed: minipack: Update flash partition table ARM: dts: aspeed: Add Facebook Fuji (AST2600) BMC ARM: dts: aspeed: Add Facebook Elbert (AST2600) BMC ARM: dts: aspeed: Add Facebook Cloudripper (AST2600) BMC ARM: dts: aspeed: Common dtsi for Facebook AST2600 Network BMCs ARM: dts: aspeed: wedge400: Use common flash layout ARM: dts: Add Facebook BMC 128MB flash layout ARM: dts: aspeed-g5: Remove ngpios from sgpio node. ARM: dts: aspeed-g6: Add SGPIO node. dt-bindings: aspeed-sgpio: Add ast2600 sgpio dt-bindings: aspeed-sgpio: Convert txt bindings to yaml. ARM: dts: aspeed: ast2500evb: Enable built in RTC ARM: dts: aspeed: tacoma: Add TPM reset GPIO ARM: dts: rainier, everest: Add TPM reset GPIO ARM: dts: aspeed: wedge100: Enable ADC channels ARM: dts: aspeed: galaxy100: Remove redundant ADC device ARM: dts: aspeed: wedge40: Remove redundant ADC device ARM: dts: aspeed: Enable ADC in Facebook AST2400 common dtsi ... Link: https://lore.kernel.org/r/CACPK8XdWRBb9cuDWGQPfK8R8TsZuydJQHsL4_e2w=HvCKAMogg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-17Merge tag 'qcom-dts-for-5.15' of ↵Arnd Bergmann9-33/+290
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm dts updates for v5.15 This introduces the MSM8226 platform and an initial dts for the Samsung Galaxy S III Neo phone. MSM8974 gains another UART and this is used to enable Bluetooth on the Sony Xperia Z2 Tablet. Samsung Galaxy S5 gains regulator definitions for audio and modem remoteprocs, effectively enabling these. DSI clocks on APQ8064 are updates as the old legacy clock names are no longer supported by the driver. And IPQ806x GMAC nodes gains AHB resets wired up. Lastly APQ8060 is converted to a SPDX header and the ethernet node is updates in accordance with the binding. * tag 'qcom-dts-for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add ahb reset to ipq806x-gmac ARM: dts: qcom: Fix up APQ8060 DragonBoard license ARM: dts: qcom: msm8974: castor: Add Bluetooth-related nodes ARM: dts: qcom: msm8974: Add blsp2_uart7 for bluetooth on sirius ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S III Neo phone dt-bindings: arm: qcom: Document MSM8226 SoC binding ARM: dts: qcom: Add support for MSM8226 SoC ARM: dts: qcom: apq8060: Correct Ethernet node name and drop bogus irq property ARM: dts: qcom: apq8064: correct clock names ARM: dts: qcom: msm8974-klte: Enable remote processors Link: https://lore.kernel.org/r/20210816211957.579365-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-17ARM: dts: aspeed: p10bmc: Add power control pinsJim Wright2-2/+2
Add to p10bmc systems the GPIO line names used in chassis power on / off control and chassis power good monitoring. Names used are as documented at [1]. [1] https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md Signed-off-by: Jim Wright <jlwright@us.ibm.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210816160002.18645-1-jlwright@us.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-16Merge tag 'imx-dt-5.15' of ↵Arnd Bergmann27-441/+2431
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm32 device tree changes for 5.15: - A series from Christoph Niedermaier to clean up i.MX6 DHCOM support. - New board support: DHCOM based PicoITX, DHSOM based DRC02, SolidRun SolidSense, SKOV i.MX6 boards. - Add WiFi support for i.MX7D base reMkarkable2 device. - Add FTM devices for i.MX7 to have Flex Timers support. - Configure ENET_REF clock to 125MHz for imx6qp-prtwd3 to support RGMII PHY mode. - Drop unneeded #address-cells and #size-cells from vf610-zii SPI EEPROM device node. - Add missing USB OTG OC pinmux and Crypto device for i.MX6QDL Gateworks boards. * tag 'imx-dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (23 commits) ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node ARM: dts: add SKOV imx6q and imx6dl based boards ARM: dts: imx7: add ftm nodes for Flex Timers ARM: dts: imx6qdl-dhcom: Add DHSOM based DRC02 board ARM: dts: imx6qdl-dhcom: Add DHCOM based PicoITX board ARM: dts: imx6qdl-dhcom: Split SoC-independent parts of DHCOM SOM and PDK2 ARM: dts: imx6q-dhcom: Cleanup of the devicetrees ARM: dts: imx6q-dhcom: Rearrange of iomux ARM: dts: imx6q-dhcom: Rework of the DHCOM GPIO pinctrls ARM: dts: imx6q-dhcom: Use 1G ethernet on the PDK2 board ARM: dts: imx6q-dhcom: Set minimum memory size of all DHCOM i.MX6 variants ARM: dts: imx6q-dhcom: Remove ddc-i2c-bus property ARM: dts: imx6q-dhcom: Add keys and leds to the PDK2 board ARM: dts: imx6q-dhcom: Align stdout-path with other DHCOM SoMs ARM: dts: imx6q-dhcom: Adding Wake pin to the PCIe pinctrl ARM: dts: imx6q-dhcom: Fill GPIO line names on DHCOM SoM ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet PHY ARM: dts: imx6q-dhcom: Add the parallel system bus ARM: dts: imx7d-remarkable2: Add WiFi support ... Link: https://lore.kernel.org/r/20210814133853.9981-2-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16Merge tag 'tegra-for-5.15-arm-dt' of ↵Arnd Bergmann12-62/+218
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.15-rc1 The majority of this is temperature sensor additions for various devices and fixes to the trigger type of the thermal interrupts. Other than that there are various minor fixes across the board. * tag 'tegra-for-5.15-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: tamonten: Fix UART pad setting ARM: tegra: nexus7: Improve thermal zones ARM: tegra: acer-a500: Improve thermal zones ARM: tegra: acer-a500: Use verbose variant of atmel,wakeup-method value ARM: tegra: acer-a500: Add power supplies to accelerometer ARM: tegra: acer-a500: Remove bogus USB VBUS regulators ARM: tegra: jetson-tk1: Correct interrupt trigger type of temperature sensor ARM: tegra: dalmore: Correct interrupt trigger type of temperature sensor ARM: tegra: cardhu: Correct interrupt trigger type of temperature sensor ARM: tegra: apalis: Correct interrupt trigger type of temperature sensor ARM: tegra: nyan: Correct interrupt trigger type of temperature sensor ARM: tegra: acer-a500: Add interrupt to temperature sensor node ARM: tegra: nexus7: Add interrupt to temperature sensor node ARM: tegra: paz00: Add interrupt to temperature sensor node ARM: tegra: ouya: Add interrupt to temperature sensor node ARM: tegra: Add SoC thermal sensor to Tegra30 device-trees Link: https://lore.kernel.org/r/20210813162157.2820913-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16Merge tag 'renesas-arm-dt-for-v5.15-tag2' of ↵Arnd Bergmann2-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.15 (take two) - Pin control, ADC, and CANFD support for the RZ/G2L SoC, - Add interrupt-names properties to the Renesas RZ/A and RZ/G2L I2C Bus Interface. * tag 'renesas-arm-dt-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: i2c: renesas,riic: Make interrupt-names required arm64: dts: renesas: r9a07g044: Add I2C interrupt-names ARM: dts: rza: Add I2C interrupt-names dt-bindings: i2c: renesas,riic: Add interrupt-names arm64: dts: renesas: r9a07g044: Add CANFD node arm64: dts: renesas: r9a07g044: Add ADC node arm64: dts: renesas: r9a07g044: Add pinctrl node dt-bindings: clock: r9a07g044-cpg: Add entry for P0_DIV2 core clock Link: https://lore.kernel.org/r/cover.1628849623.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-16ARM: dts: aspeed: cloudripper: Add comments for "mdio1"Tao Ren1-0/+5
Add some comments to explain the purpose of "mdio1" controller: it's connected to the MDC/MDIO interface of the on-board management switch. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20210813061900.24539-1-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-16ARM: dts: aspeed: minipack: Update flash partition tableTao Ren1-4/+4
Update firmware flash "data0" partition size from 4MB to 8MB for larger persistent storage on minipack BMC. Signed-off-by: Tao Ren <rentao.bupt@gmail.com> Link: https://lore.kernel.org/r/20210720002704.7390-1-rentao.bupt@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-08-14ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHzOleksij Rempel1-0/+2
By default ENET_REF is configured to 50MHz, which is usable for the RMII link. In case RGMII is used, we need 125MHz clock. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-08-14ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells ↵Aswath Govindraju1-2/+0
property from at93c46d dt node Remove #address-cells and #size-cells property from at93c46d device tree node as it does not have child nodes. Fixes: 1556063fde42 ("ARM: dts: vf610-zii-dev: Add ZII development board.") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.