aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-09-11ARM: dts: alpine: Align GIC nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: gic@fb001000: $nodename:0: 'gic@fb001000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-09-11ARM: dts: zx: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache-controller@c00000: $nodename:0: 'l2-cache-controller@c00000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Jun Nie <[email protected]>
2020-09-11ARM: dts: tango: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache-controller@20100000: $nodename:0: 'l2-cache-controller@20100000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Mans Rullgard <[email protected]>
2020-09-11ARM: dts: spear: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache: $nodename:0: 'l2-cache' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Viresh Kumar <[email protected]>
2020-09-11ARM: dts: qcom: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache@2040000: $nodename:0: 'l2-cache@2040000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-09-11ARM: dts: prima: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache-controller@80040000: $nodename:0: 'l2-cache-controller@80040000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Barry Song <[email protected]>
2020-09-11ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4Krzysztof Kozlowski1-33/+27
The purpose of those assigned-clock-* properties is to configure clock for the I2S device so move them to respective node. This silences the dtschema warnings like: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: exynos: add input clock to CMU in Exynos4412 OdroidKrzysztof Kozlowski1-0/+1
Commit 68605101460e ("ARM: dts: exynos: Add support for audio over HDMI for Odroid X/X2/U3") added assigned clocks under Clock Management Unit. However the dtschema expects "clocks" property if "assigned-clocks" are used. Add reference to input clock to silence the dtschema warnings: arch/arm/boot/dts/exynos4412-odroidu3.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: exynos: add input clock to CMU in Exynos3250Krzysztof Kozlowski3-0/+12
Commit 52005dece527 ("ARM: dts: Add assigned clock parents to CMU node for exynos3250") added assigned clocks under Clock Management Unit to fix hangs when accessing ISP registers. However the dtschema expects "clocks" property if "assigned-clocks" are used. Add reference to input clock to silence the dtschema warnings: arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416Krzysztof Kozlowski1-12/+5
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: xti@0:reg:0: [0] is too short clocks: 'ranges' is a required property xti@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c24xx: add address to CPU nodeKrzysztof Kozlowski1-1/+6
The CPU nodes should be described as children of "cpus" bus node with appropriate "reg" properties: cpus: '#address-cells' is a required property cpus: '#size-cells' is a required property cpu: 'device_type' is a required property cpu: 'reg' is a required property Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c24xx: align PWM/timer node name with dtschemaKrzysztof Kozlowski1-1/+1
Although PWM is used on S3C24xx as clocksource/timer, the dtschema expects the node to be named in certain format: timer@51000000: $nodename:0: 'timer@51000000' does not match '^pwm(@.*|-[0-9a-f])*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c24xx: override nodes by labelKrzysztof Kozlowski2-63/+63
Using full paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c24xx: fix number of PWM cellsKrzysztof Kozlowski1-1/+1
The PWM has only three cells, not four, as pointed out by dtschema: timer@51000000: #pwm-cells:0:0: 3 was expected Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c6410: remove additional CPU compatibleKrzysztof Kozlowski1-1/+1
Only the specific compatible (arm,arm1176jzf-s) is allowed by dtschema: cpu@0: compatible: ['arm,arm1176jzf-s', 'arm,arm1176'] is too long cpu@0: compatible: Additional items are not allowed ('arm,arm1176' was unexpected) Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410Krzysztof Kozlowski1-1/+1
The SROM controller is modeled with a bus so align the device node name with dtschema to fix warning: srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410Krzysztof Kozlowski1-1/+1
The SROM controller is modeled with a bus so align the device node name with dtschema to fix warning: srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410Krzysztof Kozlowski1-19/+11
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c6410: move fixed clocks under root node in Mini6410Krzysztof Kozlowski1-19/+11
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s5pv210: correct ethernet unit address in SMDKV210Krzysztof Kozlowski1-1/+1
The SROM bank 5 is at address 0xa8000000, just like the one put in "reg" property of ethernet node. Fix the unit address of ethernet node. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: renesas: Fix pin controller node namesGeert Uytterhoeven19-19/+19
According to Devicetree Specification v0.2 and later, Section "Generic Names Recommendation", the node name for a pin controller device node should be "pinctrl". Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: aspeed: Add Mowgli BMC platformBen Pai2-0/+663
The Mowgli BMC is an ASPEED ast2500 based BMC that is part of an OpenPower Power9 server. Signed-off-by: Ben Pai <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-09-10Merge tag 'tags/bcm2835-dt-next-2020-09-08' into devicetree/nextFlorian Fainelli2-1/+169
Maxime Ripard enables vc4 on BCM2711 (RPi4), which among other things adds HDMI functionality (no 4K yet). Signed-off-by: Florian Fainelli <[email protected]>
2020-09-10ARM: dts: broadcom: Fix SP804 nodeAndre Przywara1-2/+2
The DT binding for SP804 requires to have an "arm,primecell" compatible string. Add this string so that the Linux primecell bus driver picks the device up and activates the clock. Signed-off-by: Andre Przywara <[email protected]> Tested-by: Florian Fainelli <[email protected]> [florian: added compatible to ccbtimer1] Signed-off-by: Florian Fainelli <[email protected]>
2020-09-10ARM: dts: NSP: Fix SP805 clock-namesAndre Przywara1-1/+1
The SP805 binding sets the name for the actual watchdog clock to "wdog_clk" (with an underscore). Change the name in the DTs for the Broadcom NSP platform to match that. The Linux and U-Boot driver use the *first* clock for this purpose anyway, so it does not break anything. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Ray Jui <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-09-10ARM: dts: Cygnus: Fix SP805 clocksAndre Przywara1-2/+2
The SP805 DT binding requires two clocks to be specified, but the Broadcom Cygnus DT currently only specifies one clock. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux and U-Boot SP805 driver would use the first clock to derive the actual watchdog counter frequency. Since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Ray Jui <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-09-10ARM: dts: NSP: replace status value "ok" by "okay"Adrian Schmutzler2-2/+2
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-09-10ARM: BCM5301X: Add DT for Meraki MR32Christian Lamparter2-0/+198
add support for the Cisco Meraki MR32. This is a dual-band enterprise class 802.11ac access point. The unit was donated by Chris Blake. Thank you! SoC: Broadcom BCM53016A1 (1 GHz, 2 cores) RAM: 128 MiB NAND: 128 MiB Spansion S34ML01G2 (~114 MiB useable) ETH: 1GBit Ethernet Port - PoE WIFI1: Broadcom BCM43520 an+ac (2x2:2 - id: 0x4352) WIFI2: Broadcom BCM43520 bgn (2x2:2 - id: 0x4352) WIFI3: Broadcom BCM43428 abgn (1x1:1 - id: 43428) BLE: Broadcom BCM20732 (ttyS1) LEDS: 1 x Programmable RGB Status LED (driven by a PWM) 1 x White LED (GPIO) 1 x Orange LED Fault Indicator (GPIO) 2 x LAN Activity / Speed LEDs (On the RJ45 Port) BUTTON: one Reset button MISC: AT24C64 8KiB EEPROM (i2c - stores Ethernet MAC) ina219 hardware monitor (i2c) Kensington Lock SERIAL: WARNING: The serial port needs a TTL/RS-232 3V3 level converter! The Serial setting is 115200-8-N-1. The board has a populated right angle 1x4 0.1" pinheader. The pinout is: VCC, RX, TX, GND. Odd stuff: - uart0 clock frequency is 62.5 MHz. - The LEDs are labeled as SYS-LED1 through SYS-LED3 because of the silkscreen on the PCB. - the original u-boot has been compiled with most functions and commands disabled. The u-boot env isn't setup properly either and as a result, the bcm47xxpart probing is not working. Hence, the nand partitions are specified through a "fixed-partition" binding. - The "WICED SMART(TM)" Bluetooth LE 4.0 BCM20732 chip is connected to uart2 of the SoC. The BCM20732 does not provide a HCI. So the linux' bluetooth stack is useless. The mock-up node with the compatible binding and enable-gpios property is provided solely as documentation. Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-09-10net: dsa: microchip: look for phy-mode in port nodesHelmut Grohne1-1/+1
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode property should be specified on port nodes. However, the microchip drivers read it from the switch node. Let the driver use the per-port property and fall back to the old location with a warning. Fix in-tree users. Signed-off-by: Helmut Grohne <[email protected]> Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/ Acked-by: Alexandre Belloni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Enable SD2 LED indicationLad Prabhakar1-0/+10
Add support for LED trigger on SD2 interface. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Chris Paterson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Add can1 support to carrier boardLad Prabhakar1-0/+21
This patch enables CAN1 interface exposed through connector J20 on the carrier board. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Chris Paterson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-09-10ARM: dts: r8a7742-iwg21d-q7: Add SPI NOR supportLad Prabhakar1-0/+31
Add support for the SPI NOR device which is connected to MSIOF0 interface on the iWave RainboW-G21d-q7 board. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Chris Paterson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-09-10ARM: dts: r8a7742: Add VIN DT nodesLad Prabhakar1-0/+44
Add VIN[0123] instances found in the r8a7742 SoC. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Biju Das <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-09-10ARM: dts: dra7: drop legacy cpsw dt nodeGrygorii Strashko2-56/+2
All dra7/am57 boards converted to use new driver, so drop legacy cpsw dt node. Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-09-10ARM: dts: am57xx-cl-som-am57x: switch to new cpsw switch drvGrygorii Strashko1-7/+6
Switch CompuLab CL-SOM-AM57x board to use new cpsw switch driver. Those board configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-09-10ARM: dts: dra7x-evm: switch to new cpsw switch drvGrygorii Strashko6-37/+35
Switch all TI DRA7x boards to use new cpsw switch driver. Those boards configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-09-10ARM: dts: beagle-x15: switch to new cpsw switch drvGrygorii Strashko1-7/+6
Switch all TI AM5728 BeagleBoard-X15 boards to use new cpsw switch driver. Those boards have 2 Ext. port wired and configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-09-10ARM: dts: am57xx-idk: switch to new cpsw switch drvGrygorii Strashko4-42/+9
Switch all am571/2/4-idk boards to use new cpsw switch driver. Those boards have 2 Ext. port wired and configured in dual_mac mode by default. Hence, dual_mac mode has been preserved the same way between legacy and new driver it's safe to switch drivers. Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-09-10ARM: dts: am5729: beagleboneai: switch to new cpsw switch drvGrygorii Strashko1-5/+9
Switch BeagleBone AI to use new cpsw switch driver. It has one Ext. port only and fits dual_mac mode with no issues. Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-09-10ARM: dts: am43xx: replace status value "ok" by "okay"Adrian Schmutzler3-3/+3
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-09-10ARM: dts: dra7xx: replace status value "ok" by "okay"Adrian Schmutzler5-11/+11
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-09-10ARM: dts: omap: replace status value "ok" by "okay"Adrian Schmutzler29-51/+51
While the DT parser recognizes "ok" as a valid value for the "status" property, it is actually mentioned nowhere. Use the proper value "okay" instead, as done in the majority of files already. Signed-off-by: Adrian Schmutzler <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-09-10ARM: dts: n9, n950: Remove nokia,nvm-size propertySakari Ailus2-2/+0
Remove nokia,nvm-size property as it is no longer needed. The driver can nowadays figure out the size so do not specify it in DT. Signed-off-by: Sakari Ailus <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-09-10ARM: dts: rainier: Disable internal pull-downs on eMMC pinsAndrew Jeffery1-0/+4
There's a veritable tug-of-war going on in the design, so disable one of the warring parties. Signed-off-by: Andrew Jeffery <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-09-09ARM: dts: BCM5301X: Fixed QSPI compatible stringFlorian Fainelli1-1/+1
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 1c8f40650723 ("ARM: dts: BCM5301X: convert to iProc QSPI") Signed-off-by: Florian Fainelli <[email protected]>
2020-09-09ARM: dts: NSP: Fixed QSPI compatible stringFlorian Fainelli1-1/+1
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: 329f98c1974e ("ARM: dts: NSP: Add QSPI nodes to NSPI and bcm958625k DTSes") Signed-off-by: Florian Fainelli <[email protected]>
2020-09-09ARM: dts: bcm: HR2: Fixed QSPI compatible stringFlorian Fainelli1-1/+1
The string was incorrectly defined before from least to most specific, swap the compatible strings accordingly. Fixes: b9099ec754b5 ("ARM: dts: Add Broadcom Hurricane 2 DTS include file") Signed-off-by: Florian Fainelli <[email protected]>
2020-09-09ARM: dts: s5pv210: align SPI GPIO node name with dtschema in AriesKrzysztof Kozlowski1-1/+1
The device tree schema expects SPI controller to be named "spi", otherwise dtbs_check complain with a warning like: spi-gpio-0: $nodename:0: 'spi-gpio-0' does not match '^spi(@.*|-[0-9a-f])*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Tested-by: Jonathan Bakker <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-09ARM: dts: s5pv210: use defines for IRQ flags in GoniKrzysztof Kozlowski1-1/+2
Replace hard-coded flags with defines for readability. No functional change. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-09ARM: dts: s5pv210: use defines for IRQ flags in SMDKV210Krzysztof Kozlowski1-1/+2
Replace hard-coded flags with defines for readability. No functional change. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.