aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-10-26ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the Orange Pi Plus 2E has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Fixes: 7a78ef92cdc5 ("ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Tested-by: Jernej Skrabec <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the Bananapi M1+ has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the Cubietruck has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 67073d97672d ("ARM: dts: sun7i: cubietruck: Enable the GMAC") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Tested-by: Emilio López <[email protected]> Reviewed-by: Emilio López <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the A31 Hummingbird has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: c220aec2bb79 ("ARM: dts: sun6i: Add Merrii A31 Hummingbird support") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high"Chen-Yu Tsai1-5/+0
This reverts commit 75ee680cbd2e4d0156b94f9fec50076361ab12f2. Turns out the activity and link LEDs on the RJ45 port are active low, just like on the Orange Pi PC. Revert the commit that says otherwise. Fixes: 75ee680cbd2e ("arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high") Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Tested-by: Jernej Skrabec <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet nodeJernej Skrabec1-1/+1
Ethernet PHY on BananaPi M2 Ultra provides RX and TX delays. Fix ethernet node to reflect that fact. Fixes: c36fd5a48bd2 ("ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable GMAC ethernet controller") Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios"Lubomir Rintel1-2/+2
This makes validation happier. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lubomir Rintel <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-26ARM: dts: mmp3: Add power domain for the cameraLubomir Rintel1-0/+2
The camera interfaces on MMP3 are on a separate power island that needs to be turned on for them to operate and, ideally, turned off when the cameras are not in use. This hooks the power island with the camera interfaces in the device tree. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lubomir Rintel <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-26Merge tag 'sunxi-fixes-for-5.9-2' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes One fix for an unreasonable thermal trip point on the A10 * tag 'sunxi-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun4i-a10: fix cpu_alert temperature Link: https://lore.kernel.org/r/3c95a95f-c6fa-4b34-823b-ddaa7660d274.lettre@localhost Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-26ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Enable VIN instancesLad Prabhakar1-0/+222
Enable VIN instances along with OV5640 as endpoints on the adapter board. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Biju Das <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-10-26ARM: dts: r8a7742-iwg21d-q7: Add LCD supportLad Prabhakar1-0/+99
The iwg21d comes with a 7" capacitive touch screen, therefore add support for it. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Marian-Cristian Rotariu <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-10-26ARM: dts: imx: align GPIO hog names with dtschemaKrzysztof Kozlowski3-6/+6
dtschema for GPIO controllers expects GPIO hogs to end with 'hog' suffix. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-26efi/arm: set HSCTLR Thumb2 bit correctly for HVC calls from HYPArd Biesheuvel1-0/+3
Commit db227c19e68db353 ("ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefully") updated the EFI entry code to permit firmware to invoke the EFI stub loader in HYP mode, with the MMU either enabled or disabled, neither of which is permitted by the EFI spec, but which does happen in the field. In the MMU on case, we remain in HYP mode as configured by the firmware, and rely on the fact that any HVC instruction issued in this mode will be dispatched via the SVC slot in the HYP vector table. However, this slot will point to a Thumb2 symbol if the kernel is built in Thumb2 mode, and so we have to configure HSCTLR to ensure that the exception handlers are invoked in Thumb2 mode as well. Fixes: db227c19e68db353 ("ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefully") Signed-off-by: Ard Biesheuvel <[email protected]>
2020-10-24Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds405-2072/+8141
Pull ARM Devicetree updates from Olof Johansson: "As usual, most of the changes are to devicetrees. Besides smaller fixes, some refactorings and cleanups, some of the new platforms and chips (or significant features) supported are below: Broadcom boards: - Cisco Meraki MR32 (BCM53016-based) - BCM2711 (RPi4) display pipeline support Actions Semi boards: - Caninos Loucos Labrador SBC (S500-based) - RoseapplePi SBC (S500-based) Allwinner SoCs/boards: - A100 SoC with Perf1 board - Mali, DMA, Cetrus and IR support for R40 SoC Amlogic boards: - Libretch S905x CC V2 board - Hardkernel ODROID-N2+ board Aspeed boards/platforms: - Wistron Mowgli (AST2500-based, Power9 OpenPower server) - Facebook Wedge400 (AST2500-based, ToR switch) Hisilicon SoC: - SD5203 SoC Nvidia boards: - Tegra234 VDK, for pre-silicon Orin SoC NXP i.MX boards: - Librem 5 phone - i.MX8MM DDR4 EVK - Variscite VAR-SOM-MX8MN SoM - Symphony board - Tolino Shine 2 HD - TQMa6 SoM - Y Soft IOTA Orion Rockchip boards: - NanoPi R2S board - A95X-Z2 board - more Rock-Pi4 variants STM32 boards: - Odyssey SOM board (STM32MP157CAC-based) - DH DRC02 board Toshiba SoCs/boards: - Visconti SoC and TPMV7708 board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits) ARM: dts: nspire: Fix SP804 users arm64: dts: lg: Fix SP804 users arm64: dts: lg: Fix SP805 clocks ARM: mstar: Fix up the fallout from moving the dts/dtsi files ARM: mstar: Add mstar prefix to all of the dtsi/dts files ARM: mstar: Add interrupt to pm_uart ARM: mstar: Add interrupt controller to base dtsi ARM: dts: meson8: remove two invalid interrupt lines from the GPU node arm64: dts: ti: k3-j7200-common-proc-board: Add USB support arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux dt-bindings: ti-serdes-mux: Add defines for J7200 SoC ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1 arm64: dts: zynqmp: Remove undocumented u-boot properties arm64: dts: zynqmp: Remove additional compatible string for i2c IPs arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml ...
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds10-8/+29
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-24Merge tag 'armsoc-fixes' of ↵Linus Torvalds2-6/+19
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I had queued up a batch of fixes that got a bit close to the release for sending in before the merge window opened, so I'm including them in the merge window batch instead. Mostly smaller DT tweaks and fixes, the usual mix that we tend to have through the releases" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure ARM: OMAP2+: Restore MPU power domain if cpu_cluster_pm_enter() fails ARM: dts: am33xx: modify AM33XX_IOPAD for #pinctrl-cells = 2 soc: actions: include header to fix missing prototype arm64: dts: ti: k3-j721e: Rename mux header and update macro names soc: qcom: pdr: Fixup array type of get_domain_list_resp message arm64: dts: qcom: pm660: Fix missing pound sign in interrupt-cells arm64: dts: qcom: kitakami: Temporarily disable SDHCI1 arm64: dts: sdm630: Temporarily disable SMMUs by default arm64: dts: sdm845: Fixup OPP table for all qup devices arm64: dts: allwinner: h5: remove Mali GPU PMU module ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix dcdc1 regulator soc: xilinx: Fix error code in zynqmp_pm_probe()
2020-10-23Merge tag 'tag-chrome-platform-for-v5.10' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code
2020-10-20Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds4-42/+48
Pull ARM updates from Russell King: - handle inexact watchpoint addresses (Douglas Anderson) - decompressor serial debug cleanups (Linus Walleij) - update L2 cache prefetch bits (Guillaume Tucker) - add text offset and malloc size to the decompressor kexec data * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: add malloc size to decompressor kexec size structure ARM: add TEXT_OFFSET to decompressor kexec image structure ARM: 9007/1: l2c: fix prefetch bits init in L2X0_AUX_CTRL using DT values ARM: 9010/1: uncompress: Print the location of appended DTB ARM: 9009/1: uncompress: Enable debug in head.S ARM: 9008/1: uncompress: Drop excess whitespace print ARM: 9006/1: uncompress: Wait for ready and busy in debug prints ARM: 9005/1: debug: Select flow control for all debug UARTs ARM: 9004/1: debug: Split waituart to CTS and TXRDY ARM: 9003/1: uncompress: Delete unused debug macros ARM: 8997/2: hw_breakpoint: Handle inexact watchpoint addresses
2020-10-15Merge tag 'usb-5.10-rc1' of ↵Linus Torvalds3-0/+49
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY/Thunderbolt driver updates from Greg KH: "Here is the big set of USB, PHY, and Thunderbolt driver updates for 5.10-rc1. Lots of tiny different things for these subsystems are in here, including: - phy driver updates - thunderbolt / USB 4 updates and additions - USB gadget driver updates - xhci fixes and updates - typec driver additions and updates - api conversions to various drivers for core kernel api changes - new USB control message functions to make it harder to get wrong, as found by syzbot (took 2 tries to get it right) - lots of tiny USB driver fixes and updates all over the place All of these have been in linux-next for a while, with the exception of the last "obviously correct" patch that updated a FALLTHROUGH comment that got merged last weekend" * tag 'usb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (374 commits) usb: musb: gadget: Use fallthrough pseudo-keyword usb: typec: Add QCOM PMIC typec detection driver USB: serial: option: add Cellient MPL200 card usb: typec: tcpci_maxim: Add support for Sink FRS usb: typec: tcpci: Implement callbacks for FRS usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) usb: typec: tcpci_maxim: Chip level TCPC driver usb: typec: tcpci: Add set_vbus tcpci callback usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference usbip: vhci_hcd: fix calling usb_hcd_giveback_urb() with irqs enabled usb: cdc-acm: add quirk to blacklist ETAS ES58X devices USB: serial: ftdi_sio: use cur_altsetting for consistency USB: serial: option: Add Telit FT980-KS composition USB: core: remove polling for /sys/kernel/debug/usb/devices usb: typec: add support for STUSB160x Type-C controller family usb: typec: add typec_find_pwr_opmode usb: typec: hd3ss3220: Use OF graph API to get the connector fwnode dt-bindings: usb: renesas,usb3-peri: Document HS and SS data bus dt-bindings: usb: convert ti,hd3ss3220 bindings to json-schema usb: dwc2: Fix INTR OUT transfers in DDMA mode. ...
2020-10-14Merge tag 'iommu-updates-v5.10' of ↵Linus Torvalds1-0/+48
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - ARM-SMMU Updates from Will: - Continued SVM enablement, where page-table is shared with CPU - Groundwork to support integrated SMMU with Adreno GPU - Allow disabling of MSI-based polling on the kernel command-line - Minor driver fixes and cleanups (octal permissions, error messages, ...) - Secure Nested Paging Support for AMD IOMMU. The IOMMU will fault when a device tries DMA on memory owned by a guest. This needs new fault-types as well as a rewrite of the IOMMU memory semaphore for command completions. - Allow broken Intel IOMMUs (wrong address widths reported) to still be used for interrupt remapping. - IOMMU UAPI updates for supporting vSVA, where the IOMMU can access address spaces of processes running in a VM. - Support for the MT8167 IOMMU in the Mediatek IOMMU driver. - Device-tree updates for the Renesas driver to support r8a7742. - Several smaller fixes and cleanups all over the place. * tag 'iommu-updates-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (57 commits) iommu/vt-d: Gracefully handle DMAR units with no supported address widths iommu/vt-d: Check UAPI data processed by IOMMU core iommu/uapi: Handle data and argsz filled by users iommu/uapi: Rename uapi functions iommu/uapi: Use named union for user data iommu/uapi: Add argsz for user filled data docs: IOMMU user API iommu/qcom: add missing put_device() call in qcom_iommu_of_xlate() iommu/arm-smmu-v3: Add SVA device feature iommu/arm-smmu-v3: Check for SVA features iommu/arm-smmu-v3: Seize private ASID iommu/arm-smmu-v3: Share process page tables iommu/arm-smmu-v3: Move definitions to a header iommu/io-pgtable-arm: Move some definitions to a header iommu/arm-smmu-v3: Ensure queue is read after updating prod pointer iommu/amd: Re-purpose Exclusion range registers to support SNP CWWB iommu/amd: Add support for RMP_PAGE_FAULT and RMP_HW_ERR iommu/amd: Use 4K page for completion wait write-back semaphore iommu/tegra-smmu: Allow to group clients in same swgroup iommu/tegra-smmu: Fix iova->phys translation ...
2020-10-14Merge tag 'pm-5.10-rc1' of ↵Linus Torvalds4-1393/+88
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These rework the collection of cpufreq statistics to allow it to take place if fast frequency switching is enabled in the governor, rework the frequency invariance handling in the cpufreq core and drivers, add new hardware support to a couple of cpufreq drivers, fix a number of assorted issues and clean up the code all over. Specifics: - Rework cpufreq statistics collection to allow it to take place when fast frequency switching is enabled in the governor (Viresh Kumar). - Make the cpufreq core set the frequency scale on behalf of the driver and update several cpufreq drivers accordingly (Ionela Voinescu, Valentin Schneider). - Add new hardware support to the STI and qcom cpufreq drivers and improve them (Alain Volmat, Manivannan Sadhasivam). - Fix multiple assorted issues in cpufreq drivers (Jon Hunter, Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan Gerhold, Viresh Kumar). - Fix several assorted issues in the operating performance points (OPP) framework (Stephan Gerhold, Viresh Kumar). - Allow devfreq drivers to fetch devfreq instances by DT enumeration instead of using explicit phandles and modify the devfreq core code to support driver-specific devfreq DT bindings (Leonard Crestez, Chanwoo Choi). - Improve initial hardware resetting in the tegra30 devfreq driver and clean up the tegra cpuidle driver (Dmitry Osipenko). - Update the cpuidle core to collect state entry rejection statistics and expose them via sysfs (Lina Iyer). - Improve the ACPI _CST code handling diagnostics (Chen Yu). - Update the PSCI cpuidle driver to allow the PM domain initialization to occur in the OSI mode as well as in the PC mode (Ulf Hansson). - Rework the generic power domains (genpd) core code to allow domain power off transition to be aborted in the absence of the "power off" domain callback (Ulf Hansson). - Fix two suspend-to-idle issues in the ACPI EC driver (Rafael Wysocki). - Fix the handling of timer_expires in the PM-runtime framework on 32-bit systems and the handling of device links in it (Grygorii Strashko, Xiang Chen). - Add IO requests batching support to the hibernate image saving and reading code and drop a bogus get_gendisk() from there (Xiaoyi Chen, Christoph Hellwig). - Allow PCIe ports to be put into the D3cold power state if they are power-manageable via ACPI (Lukas Wunner). - Add missing header file include to a power capping driver (Pujin Shi). - Clean up the qcom-cpr AVS driver a bit (Liu Shixin). - Kevin Hilman steps down as designated reviwer of adaptive voltage scaling (AVS) drivers (Kevin Hilman)" * tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits) cpufreq: stats: Fix string format specifier mismatch arm: disable frequency invariance for CONFIG_BL_SWITCHER cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale() cpufreq: stats: Add memory barrier to store_reset() cpufreq: schedutil: Simplify sugov_fast_switch() ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe() ACPI: EC: PM: Flush EC work unconditionally after wakeup PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI PM: hibernate: remove the bogus call to get_gendisk() in software_resume() cpufreq: Move traces and update to policy->cur to cpufreq core cpufreq: stats: Enable stats for fast-switch as well cpufreq: stats: Mark few conditionals with unlikely() cpufreq: stats: Remove locking cpufreq: stats: Defer stats update to cpufreq_stats_record_transition() PM: domains: Allow to abort power off when no ->power_off() callback PM: domains: Rename power state enums for genpd PM / devfreq: tegra30: Improve initial hardware resetting PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function PM / devfreq: Add devfreq_get_devfreq_by_node function ...
2020-10-12Merge tag 'core-build-2020-10-12' of ↵Linus Torvalds2-10/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull orphan section checking from Ingo Molnar: "Orphan link sections were a long-standing source of obscure bugs, because the heuristics that various linkers & compilers use to handle them (include these bits into the output image vs discarding them silently) are both highly idiosyncratic and also version dependent. Instead of this historically problematic mess, this tree by Kees Cook (et al) adds build time asserts and build time warnings if there's any orphan section in the kernel or if a section is not sized as expected. And because we relied on so many silent assumptions in this area, fix a metric ton of dependencies and some outright bugs related to this, before we can finally enable the checks on the x86, ARM and ARM64 platforms" * tag 'core-build-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/boot/compressed: Warn on orphan section placement x86/build: Warn on orphan section placement arm/boot: Warn on orphan section placement arm/build: Warn on orphan section placement arm64/build: Warn on orphan section placement x86/boot/compressed: Add missing debugging sections to output x86/boot/compressed: Remove, discard, or assert for unwanted sections x86/boot/compressed: Reorganize zero-size section asserts x86/build: Add asserts for unwanted sections x86/build: Enforce an empty .got.plt section x86/asm: Avoid generating unused kprobe sections arm/boot: Handle all sections explicitly arm/build: Assert for unwanted sections arm/build: Add missing sections arm/build: Explicitly keep .ARM.attributes sections arm/build: Refactor linker script headers arm64/build: Assert for unwanted sections arm64/build: Add missing DWARF sections arm64/build: Use common DISCARDS in linker script arm64/build: Remove .eh_frame* sections due to unwind tables ...
2020-10-07Merge branches 'arm/allwinner', 'arm/mediatek', 'arm/renesas', 'arm/tegra', ↵Joerg Roedel1-0/+48
'arm/qcom', 'arm/smmu', 'ppc/pamu', 'x86/amd', 'x86/vt-d' and 'core' into next
2020-10-05Merge branch 'opp/linux-next' of ↵Rafael J. Wysocki4-1393/+88
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull opertaing performance points (OPP) framework fixes for 5.10-rc1 from Viresh Kumar: "- Return -EPROBE_DEFER properly from dev_pm_opp_get_opp_table() (Stephan Gerhold). - Minor cleanups around required-opps (Stephan Gerhold). - Extends opp-supported-hw property to contain multiple versions (Viresh Kumar). - Multiple cleanups around dev_pm_opp_attach_genpd() (Viresh Kumar). - Multiple fixes, cleanups in the OPP core for overall better design (Viresh Kumar)." * 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: opp: Allow opp-level to be set to 0 opp: Prevent memory leak in dev_pm_opp_attach_genpd() ARM: tegra: Pass multiple versions in opp-supported-hw property opp: Allow opp-supported-hw to contain multiple versions dt-bindings: opp: Allow opp-supported-hw to contain multiple versions opp: Set required OPPs in reverse order when scaling down opp: Reduce code duplication in _set_required_opps() opp: Drop unnecessary check from dev_pm_opp_attach_genpd() opp: Handle multiple calls for same OPP table in _of_add_opp_table_v1() opp: Allow dev_pm_opp_get_opp_table() to return -EPROBE_DEFER opp: Remove _dev_pm_opp_find_and_remove_table() wrapper opp: Split out _opp_set_rate_zero() opp: Reuse the enabled flag in !target_freq path opp: Rename regulator_enabled and use it as status of all resources
2020-10-05ARM: dts: sun4i-a10: fix cpu_alert temperatureClément Péron1-1/+1
When running dtbs_check thermal_zone warn about the temperature declared. thermal-zones: cpu-thermal:trips:cpu-alert0:temperature:0:0: 850000 is greater than the maximum of 200000 It's indeed wrong the real value is 85°C and not 850°C. Signed-off-by: Clément Péron <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-05Merge 5.9-rc8 into usb-nextGreg Kroah-Hartman2-2/+2
We need the USB fixes in here as well for testing. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-03ARM: dts: nspire: Fix SP804 usersAndre Przywara1-4/+8
Even though the SP804 binding allows to specify only one clock, the primecell driver requires a named clock to activate the bus clock. Specify the one clock three times and provide some clock-names, to make the DT match the SP804 and primecell binding. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2020-10-03ARM: mstar: Fix up the fallout from moving the dts/dtsi filesDaniel Palmer7-7/+7
Since the dtsi/dts files have been moved some includes are now broken so this fixes up the includes so the dtbs build again. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Palmer <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2020-10-03ARM: mstar: Add mstar prefix to all of the dtsi/dts filesDaniel Palmer10-3/+3
Based on Arnd's comment[0] all of the MStar dtsi/dts files should have had a prefix. This moves the files, fixes the Makefile that generates dtbs and fixes up the MAINTAINERS entry. Fixing up some includes in the files themselves is left for a later commit as rolling it into this commit resulted in a confusing diff. 0 - https://lore.kernel.org/linux-arm-kernel/CAK8P3a0maQhfaerwG4KgFZOrUPwueKOp2+MOeG9C=+8ZNzc2Kg@mail.gmail.com/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Palmer <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2020-10-03ARM: mstar: Add interrupt to pm_uartDaniel Palmer1-0/+1
Since we now have support for the interrupt controller pm_uart's interrupt is routed through it make sense to wire up it's interrupt in the device tree. The interrupt is the same for all known chips so it goes in the base dtsi. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Palmer <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2020-10-03ARM: mstar: Add interrupt controller to base dtsiDaniel Palmer1-0/+19
Add the IRQ and FIQ intc instances to the base MStar/SigmaStar v7 dtsi. All of the known SoCs have both and at the same place with their common IPs using the same interrupt lines. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Palmer <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'hisi-arm32-dt-for-5.10-tag2' of ↵Olof Johansson4-2/+100
git://github.com/hisilicon/linux-hisi into arm/dt ARM: DT: Hisilicon ARM32 SoCs DT updates for 5.10 (take two) - Fix the system controller compatible for the hi3620 and hip04 SoCs - Add the basic device tree for the hisilicon SD5203 SoC * tag 'hisi-arm32-dt-for-5.10-tag2' of git://github.com/hisilicon/linux-hisi: ARM: dts: hisilicon: add SD5203 dts ARM: dts: hisilicon: fix the system controller compatible nodes Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'omap-for-v5.10/dt-part2-signed' of ↵Olof Johansson57-297/+220
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt More dts changes for omaps for v5.10 merge window Some more dts changes that did not make it to the first set of dts changes: - Drop unnessary nokia,nvm-size property - A series of changes to use "okay" instead of "ok" - A series of changes to move boards to use new cpsw switch driver and drop the drop legacy cpsw dt node - A series of changes to fix issues with the GPIO binding usage * tag 'omap-for-v5.10/dt-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am3874: iceboard: fix GPIO expander reset GPIOs ARM: dts: am335x: t335: align GPIO hog names with dtschema ARM: dts: am335x: lxm: fix PCA9539 GPIO expander properties ARM: dts: am437x-l4: drop legacy cpsw dt node ARM: dts: am437x: switch to new cpsw switch drv ARM: dts: am437x-l4: add dt node for new cpsw switchdev driver ARM: dts: dra7: drop legacy cpsw dt node ARM: dts: am57xx-cl-som-am57x: switch to new cpsw switch drv ARM: dts: dra7x-evm: switch to new cpsw switch drv ARM: dts: beagle-x15: switch to new cpsw switch drv ARM: dts: am57xx-idk: switch to new cpsw switch drv ARM: dts: am5729: beagleboneai: switch to new cpsw switch drv ARM: dts: am43xx: replace status value "ok" by "okay" ARM: dts: dra7xx: replace status value "ok" by "okay" ARM: dts: omap: replace status value "ok" by "okay" ARM: dts: n9, n950: Remove nokia,nvm-size property Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'sunxi-dt-for-5.10-2' of ↵Olof Johansson4-0/+356
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt A few more DT patches for 5.10, to support simple-framebuffer on the v3s and the pinecube board * tag 'sunxi-dt-for-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: v3s: Add simple-framebuffer ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera dt-bindings: arm: sunxi: add Pine64 PineCube binding ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support Link: https://lore.kernel.org/r/e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'v5.10-rockchip-dts32-1' of ↵Olof Johansson13-16/+76
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt cpu-supply fixes (supply for each cpu core not only cpu0) and a spelling for the status property. * tag 'v5.10-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: replace status value "ok" by "okay" ARM: dts: rockchip: update cpu supplies on rk3066a ARM: dts: rockchip: rk3066a: add label to cpu@1 ARM: dts: rockchip: update cpu supplies on rk3288 Link: https://lore.kernel.org/r/1834049.gShM3QRH0n@diego Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'actions-arm-dt-for-v5.10' of ↵Olof Johansson5-3/+109
git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions into arm/dt Actions Semi ARM DT for v5.10: - Add devicetree support for Caninos Loucos Labrador SBC manufactured by Laboratory of Integrated Technological Systems (LSI-TEC), Brazil. This board is based on Actions Semi S500 SoC. More information about this board can be found in their website: https://caninosloucos.org/en/ - Fix PPI interrupt specifiers for peripherals attached to Cortex-A9 CPU - Add devicetree support for RoseapplePi SBC manufactured by Roseapple Pi team in Taiwan. This board is based on Actions Semi S500 SoC. More information about this board can be found in their website: http://roseapplepi.org/ * tag 'actions-arm-dt-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/linux-actions: ARM: dts: owl-s500: Add RoseapplePi ARM: dts: owl-s500: Fix incorrect PPI interrupt specifiers ARM: dts: Add Caninos Loucos Labrador v2 Link: https://lore.kernel.org/r/20200922113712.GB11251@Mani-XPS-13-9360 Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'sunxi-dt-for-5.10-1' of ↵Olof Johansson6-4/+148
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual bunch of patches to support the Allwinner SoCs, this time adding: - Allwinner A100 initial support - Mali, DMA, cedrus and IR Support for the R40 - Crypto support for the v3s - New board: Allwinner A100 Perf1 * tag 'sunxi-dt-for-5.10-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (24 commits) ARM: dts: sun8i: v3s: Enable crypto engine dt-bindings: crypto: Add compatible for V3s dt-bindings: crypto: Specify that allwinner, sun8i-a33-crypto needs reset arm64: dts: allwinner: a64: Update the audio codec compatible arm64: dts: allwinner: a64: Update codec widget names ARM: dts: sun8i: a33: Update codec widget names ARM: dts: sun8i: r40: Add video engine node ARM: dts: sun8i: r40: Add node for system controller dt-bindings: sram: allwinner, sun4i-a10-system-control: Add R40 compatibles ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable IR ARM: dts: sun8i: r40: Add IR nodes dt-bindings: media: allwinner, sun4i-a10-ir: Add R40 compatible ARM: dts: sun8i: r40: Add DMA node dt-bindings: dma: allwinner,sun50i-a64-dma: Add R40 compatible arm64: allwinner: A100: add support for Allwinner Perf1 board dt-bindings: arm: sunxi: Add Allwinner A100 Perf1 Board bindings arm64: allwinner: A100: add the basical Allwinner A100 DTSI file dt-bindings: irq: sun7i-nmi: Add binding for A100's NMI controller dt-bindings: irq: sun7i-nmi: fix dt-binding for a80 nmi ARM: dts: sun4i: Enable HDMI support on the Mele A1000 ... Link: https://lore.kernel.org/r/ac39ee89-ea3a-4971-8cd7-8c4b2ecef39d.lettre@localhost Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'amlogic-dt-2' of ↵Olof Johansson1-2/+0
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt ARM: dts: amlogic updates for v5.10 (round 2) - GPU: remove invalid interrupt lines * tag 'amlogic-dt-2' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8: remove two invalid interrupt lines from the GPU node Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'renesas-fixes-for-v5.9-tag1' of ↵Olof Johansson1-1/+14
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes Renesas fixes for v5.9 - Fix touch controller probe failure on the iWave RainboW G20D Qseven board. * tag 'renesas-fixes-for-v5.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: dts: iwg20d-q7-common: Fix touch controller probe failure Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-10-03Merge tag 'usb-for-v5.10' of ↵Greg Kroah-Hartman2-0/+27
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.10 merge window Most of changes are on dwc3 (38.8%) with cdns3 falling close behind (24.1%). The biggest changes here are a series of non-critical fixes to corner cases on dwc3, produced by Thinh N, and a series of major improvements to cdns3 produced by Peter C. We also have the traditional set of new device support (Intel Keem Bay, Hikey 970) on dwc3. A series of sparse/coccinelle and checkpatch fixes on dwc3 by yours truly and a set of minor changes all over the stack. * tag 'usb-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (117 commits) usb: dwc2: Fix INTR OUT transfers in DDMA mode. usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs usb: dwc2: override PHY input signals with usb role switch support dt-bindings: usb: dwc2: add optional usb-role-switch property usb: dwc3: of-simple: Add compatible string for Intel Keem Bay platform dt-bindings: usb: Add Intel Keem Bay USB controller bindings usb: dwc3: gadget: Support up to max stream id usb: dwc3: gadget: Return early if no TRB update usb: dwc3: gadget: Keep TRBs in request order usb: dwc3: gadget: Revise setting IOC when no TRB left usb: dwc3: gadget: Look ahead when setting IOC usb: dwc3: gadget: Allow restarting a transfer usb: bdc: remove duplicated error message usb: dwc3: Stop active transfers before halting the controller usb: cdns3: gadget: enlarge the TRB ring length usb: cdns3: gadget: sg_support is only for DEV_VER_V2 or above usb: cdns3: gadget: need to handle sg case for workaround 2 case usb: cdns3: gadget: handle sg list use case at completion correctly usb: cdns3: gadget: add CHAIN and ISP bit for sg list use case usb: cdns3: gadget: improve the dump TRB operation at cdns3_ep_run_transfer ...
2020-10-02ARM: dts: meson8: remove two invalid interrupt lines from the GPU nodeMartin Blumenstingl1-2/+0
The 3.10 vendor kernel defines the following GPU 20 interrupt lines: #define INT_MALI_GP AM_IRQ(160) #define INT_MALI_GP_MMU AM_IRQ(161) #define INT_MALI_PP AM_IRQ(162) #define INT_MALI_PMU AM_IRQ(163) #define INT_MALI_PP0 AM_IRQ(164) #define INT_MALI_PP0_MMU AM_IRQ(165) #define INT_MALI_PP1 AM_IRQ(166) #define INT_MALI_PP1_MMU AM_IRQ(167) #define INT_MALI_PP2 AM_IRQ(168) #define INT_MALI_PP2_MMU AM_IRQ(169) #define INT_MALI_PP3 AM_IRQ(170) #define INT_MALI_PP3_MMU AM_IRQ(171) #define INT_MALI_PP4 AM_IRQ(172) #define INT_MALI_PP4_MMU AM_IRQ(173) #define INT_MALI_PP5 AM_IRQ(174) #define INT_MALI_PP5_MMU AM_IRQ(175) #define INT_MALI_PP6 AM_IRQ(176) #define INT_MALI_PP6_MMU AM_IRQ(177) #define INT_MALI_PP7 AM_IRQ(178) #define INT_MALI_PP7_MMU AM_IRQ(179) However, the driver from the 3.10 vendor kernel does not use the following four interrupt lines: - INT_MALI_PP3 - INT_MALI_PP3_MMU - INT_MALI_PP7 - INT_MALI_PP7_MMU Drop the "pp3" and "ppmmu3" interrupt lines. This is also important because there is no matching entry in interrupt-names for it (meaning the "pp2" interrupt is actually assigned to the "pp3" interrupt line). Fixes: 7d3f6b536e72c9 ("ARM: dts: meson8: add the Mali-450 MP6 GPU") Reported-by: Thomas Graichen <[email protected]> Signed-off-by: Martin Blumenstingl <[email protected]> Signed-off-by: Kevin Hilman <[email protected]> Tested-by: thomas graichen <[email protected]> Reviewed-by: Neil Armstrong <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-01ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETAStephen Boyd1-0/+1
On newer keyboards this key is in a different place. Add both options to the keymap so that both new and old keyboards work. Cc: Douglas Anderson <[email protected]> Signed-off-by: Stephen Boyd <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Reviewed-by: Matthias Brugger <[email protected]> Signed-off-by: Enric Balletbo i Serra <[email protected]>
2020-09-30ARM: dts: hisilicon: add SD5203 dtsKefeng Wang2-0/+98
Add sd5203.dts for Hisilicon SD5203 SoC platform. Signed-off-by: Kefeng Wang <[email protected]> Signed-off-by: Zhen Lei <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2020-09-30ARM: dts: hisilicon: fix the system controller compatible nodesZhen Lei2-2/+2
The DT binding for Hisilicon system controllers require to have a "syscon" compatible string. Signed-off-by: Zhen Lei <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2020-09-29Merge tag 'devicetree-fixes-for-5.9-3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix handling of HOST_EXTRACFLAGS for dtc - Several warning fixes for DT bindings * tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting dt-bindings: Fix 'reg' size issues in zynqmp examples ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding dt-bindings: crypto: sa2ul: fix a DT binding check warning
2020-09-28ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfdMaxime Ripard1-1/+1
The current binding for the RPi firmware uses the simple-bus compatible as a fallback to benefit from its automatic probing of child nodes. However, simple-bus also comes with some constraints, like having the ranges, our case. Let's switch to simple-mfd that provides the same probing logic without those constraints. Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2020-09-28ARM: dts: sun8i: v3s: Add simple-framebufferMartin Cerveny1-0/+16
Add support for "allwinner,simple-framebuffer" with "mixer0-lcd0" pipeline from boot loader (u-boot). It depends on boot loader implementation of DE2/TCON0 setup with LCD. Signed-off-by: Martin Cerveny <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-28ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP cameraIcenowy Zheng2-0/+236
The Pine64 PineCube IP camera is an IP camera with SoChip S3 SoC. It comes with a main board, an expansion board and a camera. The main board features a Micro-USB power-only jack, a USB Type-A port, an Ethernet port connected to the internal PHY of the SoC and a Realtek RTL8189ES SDIO Wi-Fi module. A RGB LCD connector is reserved on the board. The expansion board features a TF slot, a microphone, a speaker connector with on-board amplifier and a few IR LEDs. Add support for the kit, with features on the main board and the expansion board now. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-28ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bankIcenowy Zheng1-0/+6
I2C1 controller is available at PE bank, usually used for connecting an I2C-controlled camera sensor. Add pinctrl node for it. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-28ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSIIcenowy Zheng1-0/+14
The CSI1 controller of V3/V3s/S3/S3L SoCs is used for parallel CSI. As we're going to add support for Pine64 SCC board, which uses 8-bit parallel CSI (and the MCLK output), add the pinctrl node of 8-bit CSI and MCLK to the DTSI file. Signed-off-by: Icenowy Zheng <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.