aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot
AgeCommit message (Collapse)AuthorFilesLines
2020-11-16ARM: dts: aspeed: minipack: Fixup I2C treeTao Ren1-0/+888
Create all the i2c switches in device tree and use aliases to assign child channels with consistent bus numbers. Besides, "i2c-mux-idle-disconnect" is set for all the i2c switches to avoid potential conflicts when multiple devices (beind the switches) use the same device address. Signed-off-by: Tao Ren <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-16ARM: dts: aspeed: wedge400: Fix FMC flash0 layoutTao Ren1-2/+2
Update "data0" partition's size from 8MB to 4MB to fix "partition data0 extends beyond the end of device" warning at bootup time. Signed-off-by: Tao Ren <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-15ARM: dts: Cygnus: Drop incorrect io-channel-ranges property.Jonathan Cameron1-1/+0
This property applies to consumers of io-channels. In this case we have a provider so the property is not used. Recent changes to dt-schema result int his being reported as an error as a dependency is enforced between this property and io-channels. Signed-off-by: Jonathan Cameron <[email protected]> Cc: Florian Fainelli <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-15ARM: dts: exynos: Add an alias for the Ethernet interface on Odroid XU3Łukasz Stelmach1-0/+4
Add an alias to enable bootloaders to find the Ethernet interface and assign a MAC address. Signed-off-by: Łukasz Stelmach <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-11-15ARM: dts: exynos: Fix Ethernet interface description on Odroid XU3Łukasz Stelmach1-2/+2
Assign appropriate compatible properties matching real USB vendor and product ID. Signed-off-by: Łukasz Stelmach <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-11-13ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150Rafał Miłecki1-0/+4
This device has a functional USB 3 port so PHY is required. Signed-off-by: Rafał Miłecki <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-13ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3Rafał Miłecki6-24/+0
It seems pointless to have it enabled. Signed-off-by: Rafał Miłecki <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-13Merge tag 'sunxi-fixes-for-5.10-1' of ↵Arnd Bergmann11-15/+10
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes Mostly some fixes for a fallout in a PHY driver that pointed out errors in our DTs. Along with that, Jernej agreed to be a reviewer! * tag 'sunxi-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h5: OrangePi Prime: Fix ethernet node arm64: dts: allwinner: a64: bananapi-m64: Enable RGMII RX/TX delay on PHY arm64: dts: allwinner: h5: libretech-all-h5-cc: Enable RGMII RX/TX delay on PHY ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHY ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHY ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHY Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high" ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet node arm64: dts: allwinner: h5: OrangePi PC2: Fix ethernet node arm64: dts: allwinner: a64: Pine64 Plus: Fix ethernet node arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node arm64: dts: allwinner: Pine H64: Enable both RGMII RX/TX delay arm64: dts: allwinner: beelink-gs1: Enable both RGMII RX/TX delay arm64: dts: allwinner: pinetab: Drop unnecessary address/size-cells information MAINTAINERS: Add Jernej Škrabec as a reviewer for Allwinner SoCs support Link: https://lore.kernel.org/r/d1a1a6a6-fca4-4f1b-93b3-f2f6963b4e04.lettre@localhost Signed-off-by: Arnd Bergmann <[email protected]>
2020-11-13Merge tag 'stm32-dt-for-v5.10-fixes-2' of ↵Arnd Bergmann3-8/+17
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.10, round 2 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Fix TA3-GPIO-C button - Fix LED5 mapping - Define VIO regulator supply on DHCOM - Enable thermal sensor support on stm32mp15xx-dhcor - Keep VDDA LDO1 always on to avoid leakage * tag 'stm32-dt-for-v5.10-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcor ARM: dts: stm32: Define VIO regulator supply on DHCOM ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2 ARM: dts: stm32: Fix TA3-GPIO-C key on STM32MP1 DHCOM PDK2 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-11-13ARM: dts: exynos: revert "add input clock to CMU in Exynos4412 Odroid"Krzysztof Kozlowski1-1/+0
This reverts commit eaf2d2f6895d676dda6c95a652b58594f2887720. The commit eaf2d2f6895d ("ARM: dts: exynos: add input clock to CMU in Exynos4412 Odroid") breaks probing of usb3503 USB hub on Odroid U3. It changes the order of clock drivers probe: the clkout (Exynos PMU) driver is probed before the main clk-exynos4 driver. The clkout driver on Exynos4412 depends on clk-exynos4 but it does not support deferred probe, therefore this dependency and changed probe order causes probe failure. The usb3503 USB hub on Odroid U3 on the other hand requires clkout clock. This can be seen in logs: [ 5.007442] usb3503 0-0008: unable to request refclk (-517) Reported-by: Marek Szyprowski <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2020-11-13Merge tag 'imx-fixes-5.10-3' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.10, 3rd round: - A series from Krzysztof Kozlowski to fix missing PMIC's interrupt line pull-up for i.MX8MM and i.MX8MN boards. - Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board to fix the choppy Bluetooth audio sound. - Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN device tree. - Fix the endianness setting of RCPM node on Layerscape SoCs. - Add the missing dma-coherent property for qoriq-fman device to improve the performance. - Fix the Ethernet PHY address on imx6q-prti6q board. * tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6q-prti6q: fix PHY address arm64: dts imx8mn: Remove non-existent USB OTG2 arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio arm64: dts: fsl: DPAA FMan DMA operations are coherent arm64: dts: fsl: fix endianness issue of rcpm arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-ddr4-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mn-var-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-beacon-som: fix missing PMIC's interrupt line pull-up arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up Link: https://lore.kernel.org/r/20201030151821.GA28266@dragon Signed-off-by: Arnd Bergmann <[email protected]>
2020-11-12ARM: dts: aspeed: Add Facebook Galaxy100 (AST2400) BMCTao Ren2-0/+58
Add initial version of device tree for Facebook Galaxy100 (AST2400) BMC. Signed-off-by: Tao Ren <[email protected]> Reviewed-by: Patrick Williams <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-12ARM: dts: aspeed: wedge100: Use common dtsiTao Ren1-105/+15
Simplify the Wedge100 device tree by using the common dtsi. In addition this enables the second firmware flash, and turns on the "i2c-mux-idle-disconnect" flag for I2C switch 7-0070. Signed-off-by: Tao Ren <[email protected]> Reviewed-by: Patrick Williams <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-12ARM: dts: aspeed: wedge40: Use common dtsiTao Ren1-111/+1
Simplify the Wedge40 device tree by using the common dtsi. Signed-off-by: Tao Ren <[email protected]> Reviewed-by: Patrick Williams <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-12ARM: dts: aspeed: Common dtsi for Facebook AST2400 Network BMCsTao Ren1-0/+117
This common descirption is included by all Facebook AST2400 Network BMC platforms to minimize duplicated device entries across Facebook Network BMC device trees. Signed-off-by: Tao Ren <[email protected]> Reviewed-by: Patrick Williams <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-11ARM: dts: BCM5301X: Move CRU devices to the CRU nodeRafał Miłecki1-25/+26
Clocks and thermal blocks are part of the CRU ("Clock and Reset Unit" or "Central Resource Unit"). Signed-off-by: Rafał Miłecki <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-11ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrlVivek Unune1-22/+4
Now that we have a pin controller, use that instead of manuplating the mdio/mdc pins directly. i.e. we no longer require the mdio-mii-mux Signed-off-by: Vivek Unune <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-11ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709xVivek Unune2-1/+10
BCM47094 version of pinmux uses different compatible and supports MDIO pinmux pins. Hence, use the correct compatible string and defines the MDIO pins group. Signed-off-by: Vivek Unune <[email protected]> Acked-by: Rafał Miłecki <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-11ARM: dts: BCM5301X: Linksys EA9500 add fixed partitionsVivek Unune1-0/+41
This router has dual paritions to store trx firmware image and dual partitions for nvram. The second one in each of these cases acts as a backup store. When tested with OpenWrt, the default partition parser causes two issues: 1. It labels both nvram partitions as nvram. In factory, second one is labeled devinfo. 2. It parses second trx image and tries to create second 'linux' partition and fails with - cannot create duplicate 'linux' partition The following patch works around both of these issues. Signed-off-by: Vivek Unune <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-11ARM: dts: BCM5310X: Harmonize xHCI DT nodes nameSerge Semin1-1/+1
In accordance with the Generic xHCI bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "generic-xhci"-compatible nodes are correctly named. Signed-off-by: Serge Semin <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-11ARM: dts: BCM5301X: Harmonize EHCI/OHCI DT nodes nameSerge Semin2-4/+4
In accordance with the Generic EHCI/OHCI bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible nodes are correctly named. Signed-off-by: Serge Semin <[email protected]> Acked-by: Florian Fainelli <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-11ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7Vivek Unune1-0/+24
Add ports 5 and 7 which are connected to gmac cores 1 & 2. These will be disabled for now. Signed-off-by: Vivek Unune <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2020-11-12ARM: dts: aspeed: amd-ethanolx: Add GPIO line namesKonstantin Aladyshev1-0/+44
Add GPIO line names for AMD EthanolX customer reference board. It populates AST2500 GPIO lines (A0-A7 to AC0-AC7) with AMD EthanolX designated names. Signed-off-by: Konstantin Aladyshev <[email protected]> Reviewed-by: Supreeth Venkatesh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-11-11ARM: dts: ux500: skomer: Pull down SDI2 FBCLKLinus Walleij1-0/+10
The feedback clock on SDI2 needs to be pulled down on this machine. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2020-11-11ARM: dts: am437x-l4: fix compatible for cpsw switch dt nodeGrygorii Strashko1-1/+1
Fix compatible the new CPSW switchdev DT node to avoid probing of legacy CPSW driver which fails: [ 2.781009] cpsw 4a100000.switch: invalid resource Fixes: 7bf8f37aea82 ("ARM: dts: am437x-l4: add dt node for new cpsw switchdev driver") Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-10ARM: dts: exynos: use hyphens in MFC reserved memory node namesKrzysztof Kozlowski1-2/+2
Use hyphens instead of underscores in the MFC reserved memory node names which is expected by naming convention, multiple dtschema files and pointed out by dtc W=2 builds. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-10ARM: dts: exynos: use hyphens in Exynos5 node namesKrzysztof Kozlowski3-35/+35
Use hyphens instead of underscores in the Exynos5250 and Exynos542x node names which is expected by naming convention, multiple dtschema files and pointed out by dtc W=2 builds. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-10ARM: dts: exynos: use generic name for max77693 motor in MidasKrzysztof Kozlowski1-1/+1
Use a generic name for the max77693 motor driver in Exynos4412 Midas boards to align with Devicetree specification naming convention. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-10ARM: dts: exynos: use hyphens in Exynos4 node namesKrzysztof Kozlowski3-40/+40
Use hyphens instead of underscores in the Exynos4210 and Exynos4412 node names which is expected by naming convention, multiple dtschema files and pointed out by dtc W=2 builds. Use also generic "ppmu" node name for PPMU nodes to match Devicetree specification. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-10ARM: dts: exynos: use hyphens in Exynos3250 node namesKrzysztof Kozlowski1-24/+24
Use hyphens instead of underscores in the Exynos3250 node names which is expected by naming convention, multiple dtschema files and pointed out by dtc W=2 builds. Use also generic "ppmu" node name for PPMU nodes to match Devicetree specification. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-11-10ARM: dts: exynos: Add interconnects to Exynos4412 mixerArtur Świgoń1-0/+1
This patch adds an 'interconnects' property to Exynos4412 DTS in order to declare the interconnect path used by the mixer. Please note that the 'interconnect-names' property is not needed when there is only one path in 'interconnects', in which case calling of_icc_get() with a NULL name simply returns the right path. Signed-off-by: Artur Świgoń <[email protected]> Signed-off-by: Sylwester Nawrocki <[email protected]> Tested-by: Chanwoo Choi <[email protected]> Reviewed-by: Chanwoo Choi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-11-10ARM: dts: exynos: Add interconnect properties to Exynos4412 bus nodesSylwester Nawrocki1-0/+6
This patch adds the following properties for Exynos4412 interconnect bus nodes: - interconnects: to declare connections between nodes in order to guarantee PM QoS requirements between nodes, - #interconnect-cells: required by the interconnect framework, - samsung,data-clk-ratio: which allows to specify minimum data clock frequency corresponding to requested bandwidth for each bus. Note that #interconnect-cells is always zero and node IDs are not hardcoded anywhere. Signed-off-by: Artur Świgoń <[email protected]> Signed-off-by: Sylwester Nawrocki <[email protected]> Tested-by: Chanwoo Choi <[email protected]> Reviewed-by: Chanwoo Choi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-11-10Merge branch 'omap-for-v5.11/dt-mot-take2' into omap-for-v5.11/dtTony Lindgren3-140/+190
2020-11-10ARM: dts: xt875: add section for kionix kxtf9Carl Philipp Klemm1-0/+16
Add section for kionix kxtf9. Signed-off-by: Carl Philipp Klemm <[email protected]> [[email protected]: removed extra header from description] Signed-off-by: Tony Lindgren <[email protected]>
2020-11-10ARM: dts: mapphone: separate out xt894 specific thingsCarl Philipp Klemm3-140/+174
Remove xt894 specific things from motorola-mapphone-common.dtsi and add them to omap4-droid4-xt894.dts and omap4-droid-bionic-xt875.dts as applicable. Signed-off-by: Carl Philipp Klemm <[email protected]> [[email protected]: shortened subject, wrapped description] Signed-off-by: Tony Lindgren <[email protected]>
2020-11-10ARM: dts: omap: Fix schema warnings for pwm-ledsAlexander Dahl4-22/+24
The node names for devices using the pwm-leds driver follow a certain naming scheme (now). Parent node name is not enforced, but recommended by DT project. DTC arch/arm/boot/dts/omap3-beagle-xm.dt.yaml CHECK arch/arm/boot/dts/omap3-beagle-xm.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml CHECK arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-beagle-xm-ab.dt.yaml: pwmleds: 'pmu_stat' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-alto35.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-alto35.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-palo35.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-palo35.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-palo43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-palo43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-alto35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-chestnut43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-gallop43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo35.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-palo43.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-summit.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-summit.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-summit.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-tobi.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-tobi.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobi.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml CHECK arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap3-overo-tobiduo.dt.yaml: pwmleds: 'overo' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap4-kc1.dt.yaml CHECK arch/arm/boot/dts/omap4-kc1.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap4-kc1.dt.yaml: pwmleds: 'green', 'orange' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap4-sdp.dt.yaml CHECK arch/arm/boot/dts/omap4-sdp.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap4-sdp.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml DTC arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml CHECK arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml /home/alex/build/linux/arch/arm/boot/dts/omap4-sdp-es23plus.dt.yaml: pwmleds: 'charging', 'kpad' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: /home/alex/src/linux/leds/Documentation/devicetree/bindings/leds/leds-pwm.yaml Signed-off-by: Alexander Dahl <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-10ARM: dts: omap5: Harmonize DWC USB3 DT nodes nameSerge Semin1-1/+1
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-10ARM: dts: am437x: Correct DWC USB3 compatible stringSerge Semin1-2/+2
Syonpsys IP cores are supposed to be defined with "snps" vendor-prefix. Use it instead of the deprecated "synopsys" one. Signed-off-by: Serge Semin <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-10ARM: dts: pandaboard es: add bluetooth uart for HCIH. Nikolaus Schaller1-0/+32
The wl271 bluetooth uart is connected to uart2. Setup a serdev uart child and separate bluetooth and uart2 pinmux from wl12xx pinmux to better group the pins and muxes. Signed-off-by: H. Nikolaus Schaller <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-10ARM: dts: pandaboard: fix pinmux for gpio user button of Pandaboard ESH. Nikolaus Schaller1-1/+1
The pinmux control register offset passed to OMAP4_IOPAD is odd. Fixes: ab9a13665e7c ("ARM: dts: pandaboard: add gpio user button") Cc: [email protected] Signed-off-by: H. Nikolaus Schaller <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2020-11-10ARM: dts: imx50-evk: Fix the chip select 1 IOMUXFabio Estevam1-1/+1
The SPI chip selects are represented as: cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>; , which means that they are used in GPIO function instead of native SPI mode. Fix the IOMUX for the chip select 1 to use GPIO4_13 instead of the native CSPI_SSI function. Fixes: c605cbf5e135 ("ARM: dts: imx: add device tree support for Freescale imx50evk board") Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-11-10ARM: dts: add Van der Laan LANMCU boardOleksij Rempel2-0/+471
Van der Laan LANMCU is a module for the food storage rooms to control proper gas composition. Co-developed-by: Robin van der Gracht <[email protected]> Signed-off-by: Robin van der Gracht <[email protected]> Signed-off-by: Oleksij Rempel <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-11-10ARM: dts: add Altesco I6P boardOleksij Rempel2-0/+565
Altesco (Altus-Escon-Company BV) I6P is a part of the diagnostic system for the vehicle inspection stations. Co-developed-by: David Jander <[email protected]> Signed-off-by: David Jander <[email protected]> Signed-off-by: Oleksij Rempel <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-11-10ARM: dts: imx6ul: segin: peb-av-02: Mark stmpe touch as wakeup-sourceStefan Riedmueller1-0/+1
Mark the STMPE resistive touch controller as a wakeup-source. Signed-off-by: Stefan Riedmueller <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-11-10ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapterStefan Riedmueller8-50/+180
The PHYTEC PEB-AV-02 adapter adds the capability to connect a parallel LCD display to the phyBOARD-Segin full featured, either with capacitive or resistive touch. Signed-off-by: Stefan Riedmueller <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-11-10ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6ULYunus Bas2-0/+94
Add a PHYTEC phyBOARD-Segin full featured with phyCORE-i.MX 6UL with eMMC and following features: - i.MX 6UL - 512 MB RAM - eMMC - USB Host/OTG - 2x 100 Mbit/s Ethernet - RS232 - CAN Signed-off-by: Yunus Bas <[email protected]> Signed-off-by: Stefan Riedmueller <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-11-09ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOMMarek Vasut1-0/+1
The VDDA LDO1 PMIC output supplies the analog VDDA input of the STM32MP1 on DHCOM, keep it always on, otherwise there could be leakage through the SoC. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Maxime Coquelin <[email protected]> Cc: Patrice Chotard <[email protected]> Cc: Patrick Delaunay <[email protected]> Cc: [email protected] To: [email protected] Signed-off-by: Alexandre Torgue <[email protected]>
2020-11-09ARM: dts: stm32: Enable thermal sensor support on stm32mp15xx-dhcorMarek Vasut1-0/+4
Enable STM32 Digital Thermal Sensor driver for stm32mp15xx-dhcor SoMs. Fixes: 94cafe1b6482 ("ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A") Signed-off-by: Marek Vasut <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Manivannan Sadhasivam <[email protected]> Cc: [email protected] To: [email protected] Reviewed-by: Manivannan Sadhasivam <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2020-11-09ARM: dts: stm32: Define VIO regulator supply on DHCOMMarek Vasut1-0/+1
The VIO regulator is supplied by PMIC Buck3, describe this in the DT. Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Maxime Coquelin <[email protected]> Cc: Patrice Chotard <[email protected]> Cc: Patrick Delaunay <[email protected]> Cc: [email protected] To: [email protected] Signed-off-by: Alexandre Torgue <[email protected]>
2020-11-09ARM: dts: stm32: Fix LED5 on STM32MP1 DHCOM PDK2Marek Vasut1-1/+1
On the prototype DHCOM, the LED5 was connected to pin PG2 of the STM32MP15xx, however on the production SoM this was changed to pin PC6. Update the connection in the DT. Fixes: 81d5fc719798 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2") Signed-off-by: Marek Vasut <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Maxime Coquelin <[email protected]> Cc: Patrice Chotard <[email protected]> Cc: Patrick Delaunay <[email protected]> Cc: [email protected] To: [email protected] Signed-off-by: Alexandre Torgue <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.