aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2023-10-10ARM: dts: imx25: Fix sram nodeFabio Estevam1-0/+3
Per sram.yaml, address-cells, size-cells and ranges are mandatory. Pass them to fix the following schema warnings: sram@78000000: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# sram@78000000: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# sram@78000000: 'ranges' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2023-10-10ARM: dts: imx25: Fix dryice nodeFabio Estevam1-2/+1
Per imxdi-rtc.yaml, there is only one valid compatible entry and clock-names is not a valid property. Change it to fix the following schema warnings: dryice@53ffc000: compatible: ['fsl,imx25-dryice', 'fsl,imx25-rtc'] is too long from schema $id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml# dryice@53ffc000: 'clock-names' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/rtc/imxdi-rtc.yaml# Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2023-10-10ARM: dts: imx6qdl-gw5904: add dt props for populating eth MAC addrsTim Harvey1-4/+13
Add device-tree props to allow boot firmware to populate MAC addresses. Signed-off-by: Tim Harvey <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2023-10-10ARM: dts: vfxxx: Write dmas in a single lineFabio Estevam1-18/+9
There is no need to split dmas in two lines. Make it more readable by writing it in a single line. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2023-10-09ARM: dts: ixp4xx: Use right restart keycodeLinus Walleij4-4/+4
The "reset" key on a few IXP4xx routers were sending KEY_ESC but what we want to send is KEY_RESTART which will make OpenWrt and similar userspace do a controlled reboot. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2023-10-09ARM: dts: ixp4xx-nslu2: Enable write on flashLinus Walleij1-0/+2
To upgrade the firmware and similar, the flash needs write access. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2023-10-09ARM: dts: ixp4xx: Add USRobotics USR8200 device treeLinus Walleij2-1/+231
This is a USRobotics NAS/Firewall/router that has been supported by OpenWrt in the past. It had dedicated users so let's get it properly supported. Some debugging and fixing was provided by Howard Harte. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2023-10-09ARM: dts: Use only the Linksys compatible for nowLinus Walleij1-1/+1
The Gemtek users can just use the Linksys device tree, triplet compatible is overdoing it. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2023-10-09ARM: dts: imx27-phytec: Use eeprom as the node nameFabio Estevam2-2/+2
Node names should be generic, so use 'eeprom' to fix the following schema warnings: at24@52: $nodename:0: 'at24@52' does not match '^eeprom@[0-9a-f]{1,2}$' from schema $id: http://devicetree.org/schemas/eeprom/at24.yaml# Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2023-10-09ARM: dts: imx51: Remove invalid sahara compatibleFabio Estevam1-1/+1
Per fsl-imx-sahara.yaml, there should not be a 'fsl,imx51-sahara' compatible. Remove it to fix the following schema warning: imx51-apf51.dtb: crypto@83ff8000: compatible: ['fsl,imx53-sahara', 'fsl,imx51-sahara'] is too long from schema $id: http://devicetree.org/schemas/crypto/fsl-imx-sahara.yaml# Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2023-10-09ARM: dts: stm32: add SDIO pinctrl sleep support on stm32f7 boardsBen Wolsieffer3-3/+6
Use the new analog mode SDIO pin definitions on the STM32F7 boards. Signed-off-by: Ben Wolsieffer <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2023-10-09ARM: dts: stm32: add stm32f7 SDIO sleep pinsBen Wolsieffer1-0/+22
Add SDIO sleep pin definitions that place the pins in analog mode to save power. Signed-off-by: Ben Wolsieffer <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2023-10-09ARM: dts: stm32: add RNG node for STM32MP13x platformsGatien Chevallier1-0/+8
The RNG on STM32MP13 offers upgrades like customization of its configuration and the conditional reset. The hardware RNG should be managed in the secure world for but it is supported on Linux. Therefore, is it not default enabled. Signed-off-by: Gatien Chevallier <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2023-10-07ARM: dts: omap4-embt2ws: Fix pinctrl single node name warningTony Lindgren1-1/+1
Looks like one pinctrl single binding warning sneaked in while we were implementing the yaml binding. Let's fix the 'pinmux-wl12xx-gpio' does not match any of the regexes warning by adding -pins suffix. Signed-off-by: Tony Lindgren <[email protected]>
2023-10-07ARM: dts: motorola-mapphone: Add mdm6600 sleep pinsTony Lindgren1-1/+19
The sleep pins never got added earlier probably because the driver was not behaving correctly with the sleep pins. We need the sleep pins to prevent the modem from waking up on it's own if the reset pin glitches in deeper SoC idle states. Cc: Ivaylo Dimitrov <[email protected]> Cc: Merlijn Wajer <[email protected]> Cc: Pavel Machek <[email protected]> Reviewed-by: Sebastian Reichel <[email protected]> Message-ID: <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2023-10-07ARM: dts: am3517: Configure ethernet aliasAdam Ford1-0/+1
The AM3517 has one ethernet controller called davinci_emac. Configuring the alias allows the MAC address to be passed from the bootloader to Linux. Signed-off-by: Adam Ford <[email protected]> Message-ID: <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2023-10-07ARM: dts: am3517-evm: Enable Ethernet PHY InterruptAdam Ford1-0/+19
The Ethernet PHY interrupt pin is routed to GPIO_58. Create a PHY node to configure this GPIO for the interrupt to avoid polling. Signed-off-by: Adam Ford <[email protected]> Message-ID: <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2023-10-07ARM: dts: am3517-evm: Fix LED3/4 pinmuxAdam Ford1-7/+9
The pinmux for LED3 and LED4 are incorrectly attached to the omap3_pmx_core when they should be connected to the omap3_pmx_wkup pin mux. This was likely masked by the fact that the bootloader used to do all the pinmuxing. Fixes: 0dbf99542caf ("ARM: dts: am3517-evm: Add User LEDs and Pushbutton") Signed-off-by: Adam Ford <[email protected]> Message-ID: <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2023-10-07ARM: dts: omap3-gta04: Drop superfluous omap36xx compatibleAndreas Kemnade1-1/+1
Drop omap36xx compatible as done in other omap3630 devices. This has apparently fallen through the lattice. Signed-off-by: Andreas Kemnade <[email protected]> Message-ID: <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2023-10-07ARM: dts: omap: omap4-embt2ws: Add IMU at control unitAndreas Kemnade1-1/+16
Add also the level-shifter flag to avoid probe failure in magnetometer probe. Signed-off-by: Andreas Kemnade <[email protected]> Message-ID: <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2023-10-05ARM: dts: renesas: bockw: Add FLASH nodeGeert Uytterhoeven1-0/+34
Add a device node for the Spansion S29GL512P NOR FLASH on the Bock-W development board. This FLASH resides in the external address space of the Local Bus State Controller. Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/45e6343ae07ef1add8bba5e8281ef9e6a977c573.1694768311.git.geert+renesas@glider.be
2023-10-04ARM: dts: rockchip: Switch to operating-points-v2 for RK3128's CPUAlex Bee1-4/+39
This will allow frequency-scaling for the cpu-cores. Operating frequencies and voltages have been taken from Rockchip's downstream kernel. Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Enable SMP bring-up for RK3128Alex Bee1-0/+6
For bring-up of the non-boot cpu cores the enable-method for RK3036 can be re-used. This adds a (small) chunk of SRAM for execution of the SMP trampoline code and the respective enable-method property to the cpus. Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Add CPU resets for RK3128Alex Bee1-0/+4
In order to support bring-up of the non-boot cores, this patch adds the reset controls for the cpu cores. They are required/will be used by the Rockchip platsmp driver. Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Add SRAM node for RK3128Alex Bee1-0/+8
RK3128 SoCs have 8KB of SRAM. Add the respective device tree node for it. Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Enable pwm fan for edgeble-neu2Jagan Teki1-0/+4
Edgeble Neu2 IO board Fan connected to PWM11. Enable the pwm fan for it. Signed-off-by: Jagan Teki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Add pwm11 node to rv1126Jagan Teki1-0/+11
Add pwm11 node for Rockchip RV1126. Signed-off-by: Jagan Teki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Add pwm11m0 pins to rv1126Jagan Teki1-0/+8
Add pwm11m0 pins for Rockchip RV1126 PWM11. Signed-off-by: Jagan Teki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Add pwm2 node to rv1126Jagan Teki1-0/+11
Add PWM2 node for Rockchip RV1126. Signed-off-by: Jagan Teki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Add pwm2m0 pins to rv1126Jagan Teki1-0/+8
Add pwm2m0 pins for Rockchip RV1126 PWM2. Signed-off-by: Jagan Teki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Fix timer clocks for RK3128Alex Bee1-6/+6
Currently the Rockchip timer source clocks are set to xin24 for no obvious reason and the actual timer clocks (SCLK_TIMER*) will get disabled during boot process as they have no user. That will make the SoC stuck as no timer source exists. Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi") Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Add missing quirk for RK3128's dma engineAlex Bee1-0/+1
Like most other Rockchip ARM SoCs, the PL330 needs the arm,pl330-periph-burst quirk in order to work as expected. Add it. Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi") Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Add missing arm timer interrupt for RK3128Alex Bee1-1/+2
The Cortex-A7 timer has 4 interrupts. Add the missing one. Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi") Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-10-04ARM: dts: rockchip: Fix i2c0 register address for RK3128Alex Bee1-1/+1
The register address for i2c0 is missing a 0x to mark it as hex. Fixes: a0201bff6259 ("ARM: dts: rockchip: add rk3128 soc dtsi") Signed-off-by: Alex Bee <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2023-09-29ARM: dts: at91: sam9x60_curiosity: Add mandatory dt property for RTTTudor Ambarus1-0/+4
atmel,rtt-rtc-time-reg is a mandatory property and encodes the GPBR register used to store the time base when the RTT is used as an RTC. Align the RTT with what's currently done for sam9x60ek and sama7g5ek, and enable it by default even if RTC is also enabled. Signed-off-by: Tudor Ambarus <[email protected]> [[email protected]: adapt to newer kernel] Signed-off-by: Nicolas Ferre <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Claudiu Beznea <[email protected]>
2023-09-29ARM: dts: sunxi: add support for Anbernic RG-NanoChris Morgan2-0/+277
The Anbernic RG-Nano is a small portable game device based on the Allwinner V3s SoC. It has GPIO buttons on the face and side for input, a single mono speaker, a 240x240 SPI controlled display, a USB-C OTG port, an SD card slot for booting, and 64MB of RAM included in the SoC. There does not appear to be a crystal feeding the internal RTC so it does not keep proper time (for me it ran 8 hours slow in a 24 hour period). External RTC works just fine. Working/Tested: - SDMMC - UART (for debugging) - Buttons - Charging/battery/PMIC - Speaker - RTC (external RTC) - USB - Display Signed-off-by: Chris Morgan <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Reviewed-by: Samuel Holland <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jernej Skrabec <[email protected]>
2023-09-29ARM: dts: sun8i: v3s: add EHCI and OHCI to v3s dtsChris Morgan1-0/+23
Add the EHCI and OHCI controller to the Allwinner v3s to support using USB in host mode. Signed-off-by: Chris Morgan <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jernej Skrabec <[email protected]>
2023-09-29arm: dts: sun8i: V3s: Add pinctrl for pwmChris Morgan1-0/+12
Add pinctrl nodes for pwm0 and pwm1. Signed-off-by: Chris Morgan <[email protected]> Reviewed-by: Andre Przywara <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jernej Skrabec <[email protected]>
2023-09-29ARM: dts: stm32: omit unused pinctrl groups from stm32mp15 dtb filesSascha Hauer1-0/+228
stm32mp15-pinctrl.dtsi contains nearly all pinctrl groups collected from all boards. Most of them end up unused by a board and only waste binary space. Add /omit-if-no-ref/ to the groups to scrub the unused groups from the dtbs. Signed-off-by: Sascha Hauer <[email protected]> Reviewed-by: Ahmad Fatoum <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2023-09-29ARM: dts: stm32: stm32f7-pinctrl: don't use multiple blank linesDario Binacchi1-1/+0
The patch fixes the following warning: arch/arm/dts/stm32f7-pinctrl.dtsi:380: check: Please don't use multiple blank lines Fixes: ba287d1a0137 ("ARM: dts: stm32: add pin map for LTDC on stm32f7") Signed-off-by: Dario Binacchi <[email protected]> Reviewed-by: Raphaël Gallais-Pou <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2023-09-29ARM: dts: stm32: add HASH on stm32mp131Lionel Debieve1-0/+11
Add the HASH support on stm32mp131. Signed-off-by: Lionel Debieve <[email protected]> Signed-off-by: Thomas Bourgoin <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2023-09-29ARM: dts: at91: sama5d29_curiosity: Add device tree for sama5d29_curiosity boardMihai Sain2-0/+602
Add initial device tree file for sama5d29_curiosity board. Signed-off-by: Mihai Sain <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Claudiu Beznea <[email protected]>
2023-09-27ARM: dts: qcom: ipq8064: move keys and leds out of soc nodeKrzysztof Kozlowski2-89/+88
GPIO keys and LEDs are not part of the SoC, so move them to top-level to fix dtbs_check warnings like: qcom-ipq8064-rb3011.dtb: soc: gpio-keys: {'compatible': ['gpio-keys'], ... should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-27ARM: dts: qcom: mdm9615: populate vsdcc fixed regulatorKrzysztof Kozlowski1-8/+6
Fixed regulator put under "regulators" node will not be populated, unless simple-bus or something similar is used. Drop the "regulators" wrapper node to fix this. Fixes: 2c5e596524e7 ("ARM: dts: Add MDM9615 dtsi") Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-27ARM: dts: qcom: apq8060: drop incorrect regulator-typeKrzysztof Kozlowski1-1/+0
regulator-fixed does not have a "regulator-type" property: qcom-apq8060-dragonboard.dtb: regulator-fixed: Unevaluated properties are not allowed ('regulator-type' was unexpected) Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-27ARM: dts: qcom: apq8064: drop incorrect regulator-typeKrzysztof Kozlowski2-2/+0
regulator-fixed does not have a "regulator-type" property: qcom-apq8064-ifc6410.dtb: regulator-ext-3p3v: Unevaluated properties are not allowed ('regulator-type' was unexpected) Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-27ARM: dts: qcom: sdx65: fix SDHCI clocks orderKrzysztof Kozlowski1-3/+3
Bindings expect clocks to be in different order: qcom-sdx65-mtp.dtb: mmc@8804000: clock-names:0: 'iface' was expected qcom-sdx65-mtp.dtb: mmc@8804000: clock-names:1: 'core' was expected Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-27ARM: dts: qcom: apq8064: drop label property from DSIKrzysztof Kozlowski1-1/+0
DSI node does not accept nor use "label" property: qcom-apq8064-asus-nexus7-flo.dtb: dsi@4700000: Unevaluated properties are not allowed ('label' was unexpected) Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-27ARM: qcom: msm8974: Add rpm-master-stats nodeMatti Lehtimäki1-0/+32
Add rpm-master-stats node for MSM8974 and the required RPM MSG RAM slices for memory access. Signed-off-by: Matti Lehtimäki <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2023-09-27ARM: qcom: msm8226: Add rpm-master-stats nodeMatti Lehtimäki1-0/+32
Add rpm-master-stats node for MSM8226 and the required RPM MSG RAM slices for memory access. Signed-off-by: Matti Lehtimäki <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.