aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2023-06-20Merge tag 'imx-dt-6.5' of ↵Arnd Bergmann87-143/+899
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX ARM device tree for 6.5: - New board support: Marantec Maveo Box. - Add HDMI support for TQMa6x/MBa6 board. - A series from Andrew Lunn to add phy-mode and fixed links for Ethernet devices on imx51, imx6qdl and vf610. - A bunch of changes from Fabio Estevam to clean up deprecated and invalid properies, fix up node names to remove dt-schema warnings. - A series of maintenance updates for Protonic Holland boards, mostly on the USB subsystem configuration, thermal zones, and the naming of GPIO keys. - Update dma-apbh device node name to remove dtbs_check warnings. - Remove invalid nodes from fan-controller for a couple of Gateworks boards. - Small random updates and clean-ups on various boards. * tag 'imx-dt-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: imx6qdl: vicut1: rename power to power-button ARM: dts: imx6dl: prtrvt, prtvt7, prti6q, prtwd2: fix USB related warnings ARM: dts: imx6dl: plybas: fix USB over-current detection on USB OTG port ARM: dts: imx6ul: prti6g: fix USB over-current detection on USB OTG port ARM: dts: imx6qp: prtwd3: Enable USB over current detection on USB OTG port ARM: dts: imx6dl: prtmvt: fix different USB related warnings ARM: dts: imx6dl: alti6p: fix different USB related warnings ARM: dts: imx6dl: vicut1: Address USB related warnings ARM: dts: imx6dl: Add trip points to thermal zones on several devices ARM: dts: imx6dl: lanmcu: Configure over-current polarity for USB OTG node ARM: dts: imx6dl: lanmcu: Disable unused USB PHY nodes ARM: dts: imx6q: prtwd2: Correct iomux configuration for ENET MDIO and MDC ARM: dts: imx6dl: prtvt7: Remove touchscreen inversion ARM: dts: imx6dl: prtvt7: Adjust default backlight brightness to 65 ARM: dts: imx6qdl: vicut1: The sgtl5000 uses i2s not ac97 ARM: dts: imx: Use 'eeprom' as node name ARM: dts: imx6ul-ccimx6ulsom: Fix the "coin" regulator name ARM: dts: imx: Use 'pmic' as node name ARM: dts: imx6: Use the mux- prefix ARM: dts: imx7d-sdb: Allow UHS modes ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-06-20Merge tag 'sunxi-dt-for-6.5-1' of ↵Arnd Bergmann9-4/+226
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - fix DCLK clock names - new board ICnova A20 ADB4006 - add D1 SPI node - add bluetooth node for chip board - add extra mmc2 pinmux to sun5i - add axp209 iio-hwmon node * tag 'sunxi-dt-for-6.5-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: axp209: Add iio-hwmon node for internal temperature ARM: dts: sun5i: Add port E pinmux settings for mmc2 ARM: dts: sun5i: chip: Enable bluetooth riscv: dts: allwinner: d1: Add SPI controllers node arm: dts: sunxi: Add ICnova A20 ADB4006 board dt-bindings: arm: sunxi: add ICnova A20 ADB4006 binding ARM: dts: sunxi: rename tcon's clock output Link: https://lore.kernel.org/r/20230609210452.GA17638@jernej-laptop Signed-off-by: Arnd Bergmann <[email protected]>
2023-06-20Merge tag 'stm32-dt-for-v6.5-1' of ↵Arnd Bergmann29-102/+1106
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.5, round 1 Highlights: ---------- - MCU/MPU: - Replace deprecated st,hw-flow-ctrl by uart-has-rtscts. - Fix LTDC/DSI warnings. - MPU: - STMP32MP15: - Add OTP part number and Vrefint calibration in bsec. - M4 hold management updated. As SMC call is deprecated, the service is moved on a SCMI service. - Add ADC internal channels (VREFINT/VDDCORE). - ST: - Enable ADC1&2 on STM32MP15 DKx boards. - Adopt generic IIO bindings on STM32MP157C ED1 - Add supplies for OV5640 in STM32MP157C EV1 to fix yaml validation. - Fix i2s bindings to match with the YAML validation (DKx boards). - DH: - Rearrange MAC EEPROM. - Rename AV96 sound card. - Adopt generic IIo bindings. - Fix audio routing. -PHYTEC: - Add PHYTEC STM32MP1-3 Dev board based on STM32MP15 PHYTEC SOM. This SOM embeds up to 1GB DDR3LP RAM, up to 1GB eMMC, up to 16 MB QSPI and up to 128 GB NAND flash. * tag 'stm32-dt-for-v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits) ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2 ARM: dts: stm32: add required supplies of ov5640 in stm32mp157c-ev1 ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-testbench ARM: dts: stm32: adopt generic iio bindings for adc channels on dhcor-drc ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon ARM: dts: stm32: adopt generic iio bindings for adc channels on stm32mp157c-ed1 ARM: dts: stm32: enable adc on stm32mp15xx-dkx boards ARM: dts: stm32: add vrefint support to adc2 on stm32mp15 ARM: dts: stm32: add vrefint calibration on stm32mp15 ARM: dts: stm32: add adc internal channels to stm32mp15 ARM: dts: stm32: fix ltdc warnings in stm32mp15 boards ARM: dts: stm32: fix dsi warnings on stm32mp15 boards dt-bindings: display: st,stm32-dsi: Remove unnecessary fields ARM: dts: stm32: fix warnings on stm32f469-disco board ARM: dts: stm32: Shorten the AV96 HDMI sound card name ARM: dts: stm32: fix m4_rproc references to use SCMI for stm32mp15 ARM: dts: stm32: Update Cortex-M4 reset declarations on stm32mp15 ARM: dts: stm32: add STM32MP1-based Phytec board ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-06-20ARM: dts: at91: use generic name for shutdown controllerClaudiu Beznea20-20/+20
Use poweroff generic name for shdwc node to cope with device tree specifications. Signed-off-by: Claudiu Beznea <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-19ARM: dts: BCM5301X: Add cells sizes to PCIe nodesRafał Miłecki1-0/+9
This fixes: arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#address-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#size-cells' is a required property From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml Two properties that need to be added later are "device_type" and "ranges". Adding "device_type" on its own causes a new warning and the value of "ranges" needs to be determined yet. Signed-off-by: Rafał Miłecki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]>
2023-06-16ARM: dts: mvebu: align MTD partition nodes to dtschemaChris Packham1-7/+7
Update the node names for the SPI NOR and NAND partitions to conform to the partition properties in the relevant dtschema. Signed-off-by: Chris Packham <[email protected]> Reviewed-by: Miquel Raynal <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2023-06-14arm: dts: qcom: sdx55: Add interconnect pathKrishna chaitanya chundru1-0/+4
Add pcie-mem interconnect path to sdx55 target. Signed-off-by: Krishna chaitanya chundru <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: msm8226: Add thermal zones nodeMatti Lehtimäki1-0/+44
Add thermal zones present on MSM8226 SoC. Signed-off-by: Matti Lehtimäki <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: msm8226: Add tsens node and related nvmem cellsMatti Lehtimäki1-0/+113
Specify pre-parsed per-sensor calibration nvmem cells in the qfprom device node rather than parsing the whole data blob in the driver. Signed-off-by: Matti Lehtimäki <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: msm8226: Add qfprom nodeMatti Lehtimäki1-0/+7
Add missing QFPROM definition for MSM8226 SoC. Signed-off-by: Matti Lehtimäki <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: pm8941: Add thermal zone configMatti Lehtimäki1-0/+31
Add thermal zone for the PMIC thermal sensor. Signed-off-by: Matti Lehtimäki <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: pm8841: Add thermal zone configMatti Lehtimäki1-1/+32
Add thermal zone for the PMIC thermal sensor. Temperatures are based on downstream values, except for critical trip point where 140°C is used instead of 145°C due to limitations without a configured ADC. Signed-off-by: Matti Lehtimäki <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: pm8226: Add thermal sensor and thermal zone configMatti Lehtimäki1-0/+39
Add thermal sensor, which is using on chip VADC channel to report PMIC die temperature. Also add the corresponding thermal zone. Signed-off-by: Matti Lehtimäki <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: msm8974: rename labels for DSI nodesDmitry Baryshkov4-42/+50
Currently in board files MDSS and HDMI nodes stay apart, because labels for HDMI nodes do not have the mdss_ prefix. It was found that grouping all display-related notes is more useful. To keep all display-related nodes close in the board files, change DSI node aliases from dsi_* to mdss_dsi_*. Signed-off-by: Dmitry Baryshkov <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: apq8074-dragonboard: add gpio keysDmitry Baryshkov1-0/+34
Add device nodes for gpio-keys (volume-up, general key) device nodes. Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: apq8074-dragonboard: add onboard ledsDmitry Baryshkov1-0/+24
The dragonboard as three LEDs: red, green and blue. Add corresponding description. Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: Add Samsung Galaxy Express supportRudraksha Gupta2-0/+332
Add a very basic device tree file for the Samsung Galaxy Express SGH-I437. Currently, the following things work: UART, eMMC, SD Card, and USB. Signed-off-by: Rudraksha Gupta <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: msm8960: Add USB nodeRudraksha Gupta1-1/+33
Add the required nodes to support USB on the MSM8960 SoC. As it's very similar to the APQ8064 SoC, the nodes are almost identical Add a label to sleep_clk for the USB node to reference Signed-off-by: Rudraksha Gupta <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: adapt to LP855X bindings changesArtur Weber2-12/+12
Change underscores in ROM node names to dashes, and remove deprecated pwm-period property. Signed-off-by: Artur Weber <[email protected]> Reviewed-by: Luca Weiss <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: msm8226: Provide clocks to mmcc nodeLuca Weiss1-0/+15
The mmcc needs several clocks that are being used as parents. Provide them in dt. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-13ARM: dts: qcom: msm8226: Use XO from rpmcc where possibleLuca Weiss1-5/+6
The xo clock being used everywhere actually goes via the RPM. Since the rpmcc driver recently got support for this clock we can use this now. Signed-off-by: Luca Weiss <[email protected]> Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-06-09arm: dts: mt7623: add port@5 as CPU portArınç ÜNAL2-0/+48
On the MT7623AI SoC and Bananapi BPI-R2, port 5 of the MT7530 switch is connected to the second MAC of the SoC as a CPU port. Add the port and set up the second MAC on the bindings. Signed-off-by: Arınç ÜNAL <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2023-06-09arm: dts: mt7623: enable flow control on port@6Arınç ÜNAL2-0/+2
Flow control needs to be enabled on both sides to work. It is already enabled on gmac0, enable it on port@6 too. Signed-off-by: Arınç ÜNAL <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2023-06-09arm: dts: mt7623: change mt7530 switch addressArınç ÜNAL3-6/+6
In the case of muxing phy0 of the MT7530 switch, the switch and the phy will have the same address on the mdio bus, 0. This causes the ethernet driver to fail since devices on the mdio bus cannot share an address. Any address can be used for the switch, therefore, change the switch address to 0x1f. Signed-off-by: Arınç ÜNAL <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2023-06-09arm: dts: mt7623: add mt7530 switch to mt7623a.dtsiArınç ÜNAL3-130/+118
The MT7530 switch is included as a part of the multi-chip module on the MT7623AI SoC. Add it to mt7623a.dtsi and adjust DTs that call mt7623a.dtsi. Signed-off-by: Arınç ÜNAL <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2023-06-09arm: dts: mt7623: add gmacs to mt7623.dtsiArınç ÜNAL5-51/+58
There are two gigabit MACs on the MT7623AI and MT7623NI SoCs. Add them to mt7623.dtsi and adjust the DTs that call mt7623.dtsi. Now that there are labels for the MACs, remove them from under &eth on the DTs that call mt7623.dtsi. Remove the unnecessary mdio label from Bananapi BPI-R2. Signed-off-by: Arınç ÜNAL <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Matthias Brugger <[email protected]>
2023-06-09Merge tag 'renesas-dts-for-v6.5-tag2' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.5 (take two) - Add IOMMU support for PCIe devices on R-Car Gen3 and RZ/G2 SoCs, - Add HSCIF1 serial port support on Renesas ULCB boards equipped with the Shimafuji Kingfisher extension, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.5-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: ulcb-kf: Add HSCIF1 node arm64: dts: renesas: ulcb-kf: Remove flow control for SCIF1 ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier arm64: dts: renesas: Add IOMMU related properties into PCIe host nodes Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-06-09Merge tag 'amlogic-arm-dt-for-v6.5' of ↵Arnd Bergmann2-4/+4
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM DT changes for v6.5: - correct uart_B and uart_C clock references for meson8 & meson8b * tag 'amlogic-arm-dt-for-v6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: ARM: dts: meson8: correct uart_B and uart_C clock references ARM: dts: meson8b: correct uart_B and uart_C clock references Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-06-09Merge tag 'hisi-arm32-dt-for-6.5' of https://github.com/hisilicon/linux-hisi ↵Arnd Bergmann2-69/+67
into soc/dt ARM: DT: HiSilicon ARM32 DT updates for v6.5 - Clean up the pinctrl-single node names and correct the pinctrl controller nodes of the hi3620 SoC * tag 'hisi-arm32-dt-for-6.5' of https://github.com/hisilicon/linux-hisi: ARM: dts: hisilicon: Unify pinctrl-single pin group nodes Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-06-09Merge tag 'zynq-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx into soc/dtArnd Bergmann2-1/+20
ARM: Zynq DT changes for v6.5 - Setup 400k as default i2c frequency - Wire i2c recovery via gpio on zc702 * tag 'zynq-dt-for-v6.5' of https://github.com/Xilinx/linux-xlnx: ARM: zynq: dts: Add SCL & SDA GPIO entries for recovery ARM: zynq: dts: Setting default i2c clock frequency to 400kHz Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-06-09Merge tag 'omap-for-v6.5/dt-pin-nodes-signed' of ↵Arnd Bergmann156-1096/+1098
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt Clean-up for pinctrl-single node names for omaps for v6.5 To avoid producing lots of make dtbs checks warnings when the yaml binding for pinctrl-single gets merged, let's fix up the pin group node names. We want to do this rather than add non-standard node name workarounds to the yaml binding. Also included is a non-urgent fix to move gta04 model name out of the pinmux node that can wait for the merge window. * tag 'omap-for-v6.5/dt-pin-nodes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Unify pinctrl-single pin group nodes for dra7 ARM: dts: Unify pinctrl-single pin group nodes for am4 ARM: dts: Unify pinctrl-single pin group nodes for am33xx ARM: dts: Unify pinctrl-single pin group nodes for ti81xx ARM: dts: Unify pinctrl-single pin group nodes for omap5 ARM: dts: Unify pinctrl-single pin group nodes for omap4 ARM: dts: Unify pinctrl-single pin group nodes for omap2 ARM: dts: Unify pinctrl-single pin group nodes for omap3 ARM: dts: gta04: Move model property out of pinctrl node Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-06-08ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappingsRafał Miłecki1-0/+17
This allows setting FullMAC firmware regulatory domain. Signed-off-by: Rafał Miłecki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]>
2023-06-08ARM: dts: BCM5301X: fix duplex-full => full-duplexChristian Lamparter2-2/+2
this typo was found by the dtbs_check | ports:port@5:fixed-link: 'oneOf' conditional failed, | {'speed': [[1000]], 'duplex-full': True} is not of type 'array' | 'duplex-full' does not match any of the regexes: 'pinctrl-[0-]..." this should have been full-duplex; Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26") Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32") Signed-off-by: Christian Lamparter <[email protected]> Link: https://lore.kernel.org/r/50522f45566951a9eabd22820647924cc6b4a264.1686238550.git.chunkeey@gmail.com Signed-off-by: Florian Fainelli <[email protected]>
2023-06-08ARM: dts: BCM5301X: MR32: remove partition index numbersChristian Lamparter1-5/+5
removes the partition indexes in the node names under. This brings the device tree source in line with others. Signed-off-by: Christian Lamparter <[email protected]> Link: https://lore.kernel.org/r/627f57d568030a56499361790524b4d4f3381619.1686238550.git.chunkeey@gmail.com Signed-off-by: Florian Fainelli <[email protected]>
2023-06-08ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo propertyChristian Lamparter2-4/+0
| bcm53015-meraki-mr26.dtb: nand-controller@18028000: | nand@0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs'] | From schema: Documentation/[...]/nand-controller.yaml | bcm53016-meraki-mr32.dtb: nand-controller@18028000: | nand@0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs'] | From schema: Documentation/[...]/nand-controller.yaml original ECC values for these old Merakis are sadly not provided by the vendor. It looks like Meraki just stuck with what Broadcom's SDK was doing... which left this up to the proprietary nand driver. Note: The invalid setting was and is handled by brcmnand. It falls back to "bch" in brcmnand_setup_dev() when ecc.algo is set to NAND_ECC_ALGO_UNKNOWN (since "hw" is not in the list above). A correct nand-ecc-algo = "bch"; is already specified in the included "bcm5301x-nand-cs0-bch8.dtsi". So this line can be dropped. Reported-by: Rafał Miłecki <[email protected]> (per Mail) Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26") Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32") Signed-off-by: Christian Lamparter <[email protected]> Link: https://lore.kernel.org/r/2c4d00dd40124c2ddc0b139cbce7531b108f9052.1686238550.git.chunkeey@gmail.com Signed-off-by: Florian Fainelli <[email protected]>
2023-06-08ARM: dts: bcm21664-garnet: use node labelsStanislav Jakubek1-23/+23
Use node labels instead of nodename@address for BCM21664 Garnet to simplify its DTS file. Signed-off-by: Stanislav Jakubek <[email protected]> Link: https://lore.kernel.org/r/e9f1ac2e9aa0ef7e880b1c152cbd56ff6b151955.1685127525.git.stano.jakubek@gmail.com Signed-off-by: Florian Fainelli <[email protected]>
2023-06-08ARM: dts: bcm11351/21664: add UART, I2C node labelsStanislav Jakubek2-15/+15
Add node labels to serial (UART) and I2C nodes for BCM11351 and BCM21664. Signed-off-by: Stanislav Jakubek <[email protected]> Link: https://lore.kernel.org/r/4c8bb3a725dad9048665d39d0ca728b52152e59e.1685127525.git.stano.jakubek@gmail.com Signed-off-by: Florian Fainelli <[email protected]>
2023-06-08ARM: dts: bcm-mobile: move status properties to the end of nodesStanislav Jakubek4-14/+14
Move some DT "status" properties so that they're the last specified property (before sub-nodes). Signed-off-by: Stanislav Jakubek <[email protected]> Link: https://lore.kernel.org/r/d7060071cb1f4b36b06b6507a09b32c7751ca7f0.1685127525.git.stano.jakubek@gmail.com Signed-off-by: Florian Fainelli <[email protected]>
2023-06-08ARM: dts: bcm21664/23550: use CCU compatibles directlyStanislav Jakubek2-8/+8
BCM21664 and BCM23550 DTs for some reason use constants from a header file for their CCU node compatibles. Change these to use the strings directly. Signed-off-by: Stanislav Jakubek <[email protected]> Link: https://lore.kernel.org/r/65c54bd4076d646623d2a2f518631435522dc628.1685127525.git.stano.jakubek@gmail.com Signed-off-by: Florian Fainelli <[email protected]>
2023-06-08ARM: dts: bcm-mobile: change "" includes to <> where applicableStanislav Jakubek3-7/+4
While at it, also sort the includes alphabetically. Signed-off-by: Stanislav Jakubek <[email protected]> Link: https://lore.kernel.org/r/04aa10d644eb183f6c0c5b944e527e36d56e2110.1685127525.git.stano.jakubek@gmail.com Signed-off-by: Florian Fainelli <[email protected]>
2023-06-08ARM: dts: BCM5301X: Describe switch ports in the main DTSRafał Miłecki22-163/+51
All Northstar SoCs have BCM5301x switches (BCM53011, BCM53012) with 8 ports (0-8 without 6). By design 3 switch ports (5, 7 and 8) are hardwired to 3 on-SoC Ethernet interfaces. Switch port 8 requires forcing link state. It seems that global Northstar .dtsi file is the best place to describe those hw details. Only device specific bits (like labels) should go to device .dts files. This seems to fit well with a tiny exception of Asus RT-AC88U which somehow was designed to have switch 5 connected to an extra switch. This case was simply handled with a /delete-property/. Signed-off-by: Rafał Miłecki <[email protected]> Reviewed-by: Christian Lamparter <[email protected]> (MR32+MR26) Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]>
2023-06-08ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkxOlivier Moysan1-1/+1
Use "dai-format" to configure DAI audio format as specified in audio-graph-port.yaml bindings. Fixes: 144d1ba70548 ("ARM: dts: stm32: Adapt STM32MP157 DK boards to stm32 DT diversity") Signed-off-by: Olivier Moysan <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2023-06-08ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2Marek Vasut1-4/+7
The audio routing flow is not correct, the flow should be from source (second element in the pair) to sink (first element in the pair). The flow now is from "HP_OUT" to "Playback", where "Playback" is source and "HP_OUT" is sink, i.e. the direction is swapped and there is no direct link between the two either. Fill in the correct routing, where "HP_OUT" supplies the "Headphone Jack", "Line In Jack" supplies "LINE_IN" input, "Microphone Jack" supplies "MIC_IN" input and "Mic Bias" supplies "Microphone Jack". Fixes: 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board") Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Alexandre Torgue <[email protected]>
2023-06-07ARM: dts: keystone: Do not capitalize hex digitsAndrew Davis8-27/+27
Signed-off-by: Andrew Davis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Nishanth Menon <[email protected]>
2023-06-07ARM: dts: keystone: Remove ti,keystone from soc node compatibleAndrew Davis1-1/+1
This is just a "simple-bus" node, there is no need for the extra compatible "ti,keystone" which is unused and undocumented. Signed-off-by: Andrew Davis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Nishanth Menon <[email protected]>
2023-06-07ARM: dts: keystone: Fix EEPROM node namesAndrew Davis3-3/+3
These should follow the standard EEPROM node naming convention. Signed-off-by: Andrew Davis <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Nishanth Menon <[email protected]>
2023-06-07ARM: dts: Unify pinctrl-single pin group nodes for keystoneTony Lindgren3-33/+33
We want to unify the pinctrl-single pin group nodes to use naming "pins". Otherwise non-standad pin group names will add make dtbs checks errors when the pinctrl-single yaml binding gets merged. Cc: Conor Dooley <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Rob Herring <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Nishanth Menon <[email protected]>
2023-06-07ARM: dts: hisilicon: Unify pinctrl-single pin group nodesTony Lindgren2-69/+67
We want to unify the pinctrl-single pin group nodes to use naming "pins". Otherwise non-standad pin group names will add make dtbs checks errors when the pinctrl-single yaml binding gets merged. Let's also correct the pinctrl controller #size-cells to 0 while at it and drop unnecessary ranges property. Cc: Conor Dooley <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: Rob Herring <[email protected]> Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2023-06-06ARM: dts: BCM5301X: Relicense Christian's code to the GPL 2.0+ / MITRafał Miłecki2-23/+21
Move code added by Christian to the bcm-ns.dtsi which uses dual licensing. That syncs more Northstar code to be based on the same licensing schema. Cc: Christian Lamparter <[email protected]> Signed-off-by: Rafał Miłecki <[email protected]> Acked-by: Christian Lamparter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Florian Fainelli <[email protected]>
2023-06-06Merge tag 'omap-for-v6.5/dt-signed' of ↵Arnd Bergmann3-0/+452
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt Devicetree changes for omaps for v6.5 A non-urgent fix for gpmc,wait-pin property for am335x-myirtech-myc, and initial support for Epson Moverio BT-200 AR glasses. * tag 'omap-for-v6.5/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4: add initial support for Epson Moverio BT-200 ARM: dts: am335x-myirtech: Add missing NAND wait pin definition Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.