aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2020-09-16ARM: dts: s5pv210: replace deprecated "gpios" i2c-gpio property in AquilaKrzysztof Kozlowski1-2/+2
"gpios" property is deprecated. Update the Aquila DTS to fix dtbs_checks warnings like: i2c-pmic: 'sda-gpios' is a required property i2c-pmic: 'scl-gpios' is a required property Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16ARM: dts: s5pv210: move fixed regulators under root node in GoniKrzysztof Kozlowski1-37/+27
The fixed regulators are kept under dedicated "regulators" node but this causes multiple dtschema warnings: regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' regulators: #size-cells:0:0: 0 is not one of [1, 2] regulators: fixed-regulator@0:reg:0: [0] is too short regulators: fixed-regulator@1:reg:0: [1] is too short regulators: fixed-regulator@2:reg:0: [2] is too short regulators: fixed-regulator@3:reg:0: [3] is too short Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16ARM: dts: s5pv210: move fixed regulators under root node in AquilaKrzysztof Kozlowski1-28/+19
The fixed regulators are kept under dedicated "regulators" node but this causes multiple dtschema warnings: regulators: $nodename:0: 'regulators' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' regulators: #size-cells:0:0: 0 is not one of [1, 2] regulators: fixed-regulator@0:reg:0: [0] is too short regulators: fixed-regulator@1:reg:0: [1] is too short regulators: fixed-regulator@2:reg:0: [2] is too short Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16ARM: dts: exynos: Align OPP table name with dt-schemaKrzysztof Kozlowski2-9/+9
Device tree nodes should have hyphens instead of underscores. This is also expected by the bindings. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16ARM: dts: at91: sama5d2: add missing flexcom spi node propertiesAlexandre Belloni1-0/+10
SPI nodes require #address-cells and #size-cells add those properties in the flexcom spi nodes. Signed-off-by: Alexandre Belloni <[email protected]> Reviewed-by: Nicolas Ferre <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16ARM: dts: at91: add unit-address to memory nodeAlexandre Belloni51-51/+51
The memory node requires a unit-address, add it. Signed-off-by: Alexandre Belloni <[email protected]> Reviewed-by: Nicolas Ferre <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16ARM: dts: at91: move mmc pinctrl-names property to board dtsAlexandre Belloni20-8/+17
Having the pinctrl-names property in the dtsi leads to dtbs_check warnings when the board dts doesn't define pinctrl-0. Instead, move the property to the board dts actually using the mmc node. Signed-off-by: Alexandre Belloni <[email protected]> Reviewed-by: Nicolas Ferre <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-16ARM: tegra: Pass multiple versions in opp-supported-hw propertyViresh Kumar4-1393/+88
We can now pass multiple versions in "opp-supported-hw" property, lets do that and simplify the tables a bit. Reviewed-by: Dmitry Osipenko <[email protected]> Tested-by: Dmitry Osipenko <[email protected]> Signed-off-by: Viresh Kumar <[email protected]>
2020-09-15ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add can0 support to camera DBLad Prabhakar1-0/+11
This patch enables CAN0 interface exposed through connector J4 on the camera DB. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Chris Paterson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-09-15ARM: dts: r8a7742: Add VSP supportLad Prabhakar1-0/+36
Add VSP support to R8A7742 (RZ/G1H) SoC dtsi. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Chris Paterson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-09-14ARM: dts: hisilicon: Fix SP805 clocksAndre Przywara1-2/+3
The SP805 DT binding requires two clocks to be specified, but Hisilicon platform DTs currently only specify one clock. In practice, Linux would pick a clock named "apb_pclk" for the bus clock, and the Linux and U-Boot SP805 driver would use the first clock to derive the actual watchdog counter frequency. Since currently both are the very same clock, we can just double the clock reference, and add the correct clock-names, to match the binding. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2020-09-14ARM: dts: hisilicon: Fix SP804 usersAndre Przywara2-12/+22
The SP804 binding only specifies one or three clocks, but does not allow just two clocks. The HiSi 3620 .dtsi specified two clocks for the two timers, plus gave one "apb_pclk" clock-name to appease the primecell bus driver. Extend the clocks by duplicating the first clock to the end of the clock list, and add two dummy clock-names to make the primecell driver happy. I don't know what the real APB clock for the IP is, but with the current DT the first timer clock was used for that, so this change keeps the current status. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: Wei Xu <[email protected]>
2020-09-14Merge 5.9-rc5 into usb-nextGreg Kroah-Hartman15-47/+34
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-13Merge tag 'arm-soc/for-5.10/devicetree' of ↵Olof Johansson9-10/+397
https://github.com/Broadcom/stblinux into arm/dt This pull request contains Broadcom ARM-based SoCs changes for 5.10, please pull the following: - Christian adds support for the Cisco Meraki MR32 which is based on the BCM53016 SoC, this requires specifying the PWM, second UART and third PCIe controller in Device Tree before finally adding support for the board. - Adrian updates the status properties from "ok" to "okay". - Andre fixes the SP805 watchdog nodes to have the correct clock names and binding for both the Cygnus and Northstar Plus (NSP). He does the same thing with the SP804 timer node which was missing an "arm,primecell" compatible string. - Maxime enables the BCM2711 (Raspberry Pi 4) display pipeline since all DRM changes are ready. * tag 'arm-soc/for-5.10/devicetree' of https://github.com/Broadcom/stblinux: ARM: dts: broadcom: Fix SP804 node ARM: dts: NSP: Fix SP805 clock-names ARM: dts: Cygnus: Fix SP805 clocks ARM: dts: NSP: replace status value "ok" by "okay" ARM: BCM5301X: Add DT for Meraki MR32 ARM: dts: bcm2711: Enable the display pipeline ARM: dts: BCM5301X: Specify pcie2 in the DT ARM: dts: BCM5301X: Specify uart2 in the DT ARM: dts: BCM5301X: Specify PWM in the DT dt-bindings: ARM: add bindings for the Meraki MR32 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'dt-schema-5.10' of ↵Olof Johansson6-6/+6
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Various minor cleanups for ARM DTS Cleanup ARM DTS to remove dtschema validation errors. * tag 'dt-schema-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: alpine: Align GIC nodename with dtschema ARM: dts: zx: Align L2 cache-controller nodename with dtschema ARM: dts: tango: Align L2 cache-controller nodename with dtschema ARM: dts: spear: Align L2 cache-controller nodename with dtschema ARM: dts: qcom: Align L2 cache-controller nodename with dtschema ARM: dts: prima: Align L2 cache-controller nodename with dtschema Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'aspeed-5.10-devicetree' of ↵Olof Johansson11-21/+1193
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.10 - New machines * Wistron Mowgli, an AST2500 BMC for a Power9 OpenPower server * Facebook Wedge400, an AST2500 BMC system which we can assume is 4 times better than the existing Wedge100 top of rack network switch - Add a new device, the IBM Operation Panel - Fixes for Facebook's collection of BMCs - eMMC and vuart fixes * tag 'aspeed-5.10-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: ARM: dts: aspeed: Add Mowgli BMC platform ARM: dts: rainier: Disable internal pull-downs on eMMC pins ARM: aspeed: g5: Do not set sirq polarity ARM: dts: aspeed: rainier: Add IBM Operation Panel I2C device ARM: dts: aspeed: tacoma: Add IBM Operation Panel I2C device ARM: dts: aspeed: rainier: Enable XDMA engine ARM: dts: aspeed: wedge40: Update UART4 pin settings ARM: dts: aspeed: wedge40: Update FMC flash0 label ARM: dts: aspeed: Add Facebook Wedge400 BMC ARM: dts: aspeed: minipack: Update 64MB FMC flash layout ARM: dts: aspeed: yamp: Set 32MB FMC flash layout ARM: dts: aspeed: cmm: Set 32MB FMC flash layout ARM: dts: aspeed: Remove flash layout from Facebook AST2500 Common dtsi Link: https://lore.kernel.org/r/CACPK8XcDNBYAHzW6NYB4LFm3YbN63AprgW75ZqS+6uXn2b3kug@mail.gmail.com Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'juno-updates-5.10' of ↵Olof Johansson9-25/+27
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt ARMv8 Juno/Vexpress/Fast Models updates for v5.10 A few device tree source fixes to make them fully SP804 timer and SP805 watchdog binding compliant. * tag 'juno-updates-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: arm: Fix SP805 clock-names ARM: dts: arm: Fix SP805 clocks ARM: dts: arm: Fix SP804 users Link: https://lore.kernel.org/r/20200908135028.GA10106@bogus Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'samsung-dt-5.10' of ↵Olof Johansson37-358/+874
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.10 1. Add sound support to Galaxy S3/Midas family (Exynos4412). 2. Add sound support to Galaxy S/Aries family (S5Pv210). 3. Configure L2C-310 cache controller via DTS on Exynos4. 4. Big cleanup of Exynos DTS to fix as many dtschema warnings as possible. This includes adding missing properties (thus e.g. enabling S3C RTC clock), correcting existing nodes, renaming of nodes and using non-deprecated properties or compatibles. Except mentioned bring up of S3C RTC, this should not have visible effect. * tag 'samsung-dt-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (49 commits) ARM: dts: exynos: Silence SATA PHY warning in Exynos5250 ARM: dts: exynos: Remove I2C9 samsung, i2c-slave-addr from Exynos5250 boards ARM: dts: samsung: odroid-xu3: Move assigned-clock* properties to i2s0 node ARM: dts: exynos: Use S2MPS11 clock in S3C RTC in SMDK5420 ARM: dts: exynos: Silence DP HPD pinctrl dtschema warning in Exynos5250 Spring ARM: dts: exynos: Use S5M8767 clock in S3C RTC in Exynos5250 Spring ARM: dts: exynos: Add max77686 clocks for S3C RTC in SMDK5250 ARM: dts: exynos: Override thermal by label in Exynos5250 ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5 ARM: dts: exynos: Silence i2c-gpio dtschema warning in Exynos5250 Arndale ARM: dts: exynos: Correct S3C RTC bindings in SMDK5410 ARM: dts: exynos: Remove unneeded address/size cells in Exynos5260 GIC ARM: dts: exynos: Correct compatible for Exynos5260 GIC ARM: dts: exynos: Correct compatible for Exynos5 GIC ARM: dts: s5pv210: Enable audio on Aries boards ARM: dts: exynos: Correct whitespace and indentation issues ARM: dts: exynos: Correct S3C RTC bindings in Tiny4412 ARM: dts: exynos: Correct S3C RTC bindings in SMDK4412 ARM: dts: exynos: Add CPU cooling in Tiny4412 ARM: dts: exynos: Add CPU cooling in SMDK4412 ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'renesas-arm-dt-for-v5.10-tag1' of ↵Olof Johansson4-60/+492
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.10 - Increase support for the RZ/G2H SoC on the HopeRun HiHope RZ/G2H board, and its display panel expansion board, - Increase support for the RZ/G1H SoC on the iWave RainboW SoM (G21M) and Qseven board (G21D), - SATA support for the HopeRun HiHope RZ/G2N board, - PCIe endpoint support for the RZ/G2M, RZ/G2E, and RZ/G2H SoCs, - Audio support for the R-Car M3-W+ SoC. - Minor fixes and improvements. * tag 'renesas-arm-dt-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (39 commits) arm64: dts: renesas: Add HiHope RZ/G2H board with idk-1110wr display arm64: dts: renesas: r8a774e1: Add cpuidle support for CA5x cores arm64: dts: renesas: r8a774e1: Add FDP1 device nodes ARM: dts: r8a7742-iwg21d-q7: Enable PCIe Controller ARM: dts: r8a7742: Add IPMMU DT nodes arm64: dts: renesas: r8a77961: Enable Sound / Audio-DMAC arm64: dts: renesas: r8a774e1: Add PWM device nodes ARM: dts: r8a7742-iwg21m: Add SPI NOR support arm64: dts: renesas: r8a774e1-hihope-rzg2h: Enable HS400 mode ARM: dts: r8a7742-iwg21m: Add RTC support ARM: dts: r8a7742-iwg21m: Sort the nodes alphabetically ARM: dts: r8a7742: Add CAN support arm64: dts: renesas: r8a774c0: Add PCIe EP node arm64: dts: renesas: r8a774b1: Add PCIe EP nodes arm64: dts: renesas: r8a774a1: Add PCIe EP nodes ARM: dts: r8a7742: Add QSPI support arm64: dts: renesas: r8a774e1-hihope-rzg2h: Setup DU clocks arm64: dts: renesas: r8a774e1: Add LVDS device node arm64: dts: renesas: r8a774e1: Populate HDMI encoder node arm64: dts: renesas: r8a774e1: Populate DU device node ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'arm-soc/for-5.9/devicetree-fixes' of ↵Olof Johansson3-3/+3
https://github.com/Broadcom/stblinux into arm/fixes This pull request contains Broadcom ARM-based SoCs Device Tree fixes for 5.9, please pull the following: - Florian fixes the Broadcom QSPI controller binding such that the most specific compatible string is the left most one, and all existing in-tree users are updated as well. * tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux: arm64: dts: ns2: Fixed QSPI compatible string ARM: dts: BCM5301X: Fixed QSPI compatible string ARM: dts: NSP: Fixed QSPI compatible string ARM: dts: bcm: HR2: Fixed QSPI compatible string dt-bindings: spi: Fix spi-bcm-qspi compatible ordering Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'imx-fixes-5.9-2' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.9, round 2: - Fix the misspelling of 'interrupts' property in i.MX8MQ TMU DT node. - Correct 'ahb' clock for i.MX8MP SDMA1 in device tree. - Fix pad QSPI1B_SCLK mux mode for UART3 on i.MX6SX. * tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3 arm64: dts: imx8mp: correct sdma1 clk setting arm64: dts: imx8mq: Fix TMU interrupt property Link: https://lore.kernel.org/r/20200909143844.GA25109@dragon Signed-off-by: Olof Johansson <[email protected]>
2020-09-13Merge tag 'omap-for-v5.9/fixes-rc3' of ↵Olof Johansson3-31/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.9-rc cycle Few fixes for omap based devices: - Fix of_clk_get() error handling for omap-iommu - Fix missing audio pinctrl entries for logicpd boards - Fix video for logicpd-som-lv after switch to generic panels - Fix omap5 DSI clocks base * tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap5: Fix DSI base address and clocks ARM: dts: logicpd-som-lv-baseboard: Fix missing video ARM: dts: logicpd-som-lv-baseboard: Fix broken audio ARM: dts: logicpd-torpedo-baseboard: Fix broken audio ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm() Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Olof Johansson <[email protected]>
2020-09-13ARM: dts: imx6qdl-tqma6: fix LM75 compatible stringMatthias Schiffer2-2/+2
Specify the National LM75 sensor including its vendor name, as mandated by the binding docs. Fixes: cac849e9bbc8 ("ARM: dts: imx6qdl: add TQMa6{S,Q,QP} SoM") Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-13ARM: dts: imx6qdl-tqma6: remove obsolete fsl,spi-num-chipselectsMatthias Schiffer1-1/+0
This property is unneeded and not supported by the spi-imx driver. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-13ARM: dts: imx6qdl-tqma6: fix indentationMatthias Schiffer1-94/+94
The PMIC configuration is indented one level too deep. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-09-11ARM: dts: alpine: Align GIC nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: gic@fb001000: $nodename:0: 'gic@fb001000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-09-11ARM: dts: zx: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache-controller@c00000: $nodename:0: 'l2-cache-controller@c00000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Jun Nie <[email protected]>
2020-09-11ARM: dts: tango: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache-controller@20100000: $nodename:0: 'l2-cache-controller@20100000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Mans Rullgard <[email protected]>
2020-09-11ARM: dts: spear: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache: $nodename:0: 'l2-cache' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Viresh Kumar <[email protected]>
2020-09-11ARM: dts: qcom: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache@2040000: $nodename:0: 'l2-cache@2040000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-09-11ARM: dts: prima: Align L2 cache-controller nodename with dtschemaKrzysztof Kozlowski1-1/+1
Fix dtschema validator warnings like: l2-cache-controller@80040000: $nodename:0: 'l2-cache-controller@80040000' does not match '^(cache-controller|cpu)(@[0-9a-f,]+)*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Barry Song <[email protected]>
2020-09-11ARM: dts: exynos: move assigned-clock* properties to i2s0 node in Odroid XU4Krzysztof Kozlowski1-33/+27
The purpose of those assigned-clock-* properties is to configure clock for the I2S device so move them to respective node. This silences the dtschema warnings like: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: exynos: add input clock to CMU in Exynos4412 OdroidKrzysztof Kozlowski1-0/+1
Commit 68605101460e ("ARM: dts: exynos: Add support for audio over HDMI for Odroid X/X2/U3") added assigned clocks under Clock Management Unit. However the dtschema expects "clocks" property if "assigned-clocks" are used. Add reference to input clock to silence the dtschema warnings: arch/arm/boot/dts/exynos4412-odroidu3.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: exynos: add input clock to CMU in Exynos3250Krzysztof Kozlowski3-0/+12
Commit 52005dece527 ("ARM: dts: Add assigned clock parents to CMU node for exynos3250") added assigned clocks under Clock Management Unit to fix hangs when accessing ISP registers. However the dtschema expects "clocks" property if "assigned-clocks" are used. Add reference to input clock to silence the dtschema warnings: arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock-controller@10030000: 'clocks' is a dependency of 'assigned-clocks' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416Krzysztof Kozlowski1-12/+5
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: xti@0:reg:0: [0] is too short clocks: 'ranges' is a required property xti@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c24xx: add address to CPU nodeKrzysztof Kozlowski1-1/+6
The CPU nodes should be described as children of "cpus" bus node with appropriate "reg" properties: cpus: '#address-cells' is a required property cpus: '#size-cells' is a required property cpu: 'device_type' is a required property cpu: 'reg' is a required property Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c24xx: align PWM/timer node name with dtschemaKrzysztof Kozlowski1-1/+1
Although PWM is used on S3C24xx as clocksource/timer, the dtschema expects the node to be named in certain format: timer@51000000: $nodename:0: 'timer@51000000' does not match '^pwm(@.*|-[0-9a-f])*$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c24xx: override nodes by labelKrzysztof Kozlowski2-63/+63
Using full paths to extend or override a device tree node is error prone. If there was a typo error, a new node will be created instead of extending the existing node. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c24xx: fix number of PWM cellsKrzysztof Kozlowski1-1/+1
The PWM has only three cells, not four, as pointed out by dtschema: timer@51000000: #pwm-cells:0:0: 3 was expected Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c6410: remove additional CPU compatibleKrzysztof Kozlowski1-1/+1
Only the specific compatible (arm,arm1176jzf-s) is allowed by dtschema: cpu@0: compatible: ['arm,arm1176jzf-s', 'arm,arm1176'] is too long cpu@0: compatible: Additional items are not allowed ('arm,arm1176' was unexpected) Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410Krzysztof Kozlowski1-1/+1
The SROM controller is modeled with a bus so align the device node name with dtschema to fix warning: srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410Krzysztof Kozlowski1-1/+1
The SROM controller is modeled with a bus so align the device node name with dtschema to fix warning: srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410Krzysztof Kozlowski1-19/+11
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s3c6410: move fixed clocks under root node in Mini6410Krzysztof Kozlowski1-19/+11
The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: s5pv210: correct ethernet unit address in SMDKV210Krzysztof Kozlowski1-1/+1
The SROM bank 5 is at address 0xa8000000, just like the one put in "reg" property of ethernet node. Fix the unit address of ethernet node. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: renesas: Fix pin controller node namesGeert Uytterhoeven19-19/+19
According to Devicetree Specification v0.2 and later, Section "Generic Names Recommendation", the node name for a pin controller device node should be "pinctrl". Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-09-11ARM: dts: aspeed: Add Mowgli BMC platformBen Pai2-0/+663
The Mowgli BMC is an ASPEED ast2500 based BMC that is part of an OpenPower Power9 server. Signed-off-by: Ben Pai <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-09-10Merge tag 'tags/bcm2835-dt-next-2020-09-08' into devicetree/nextFlorian Fainelli2-1/+169
Maxime Ripard enables vc4 on BCM2711 (RPi4), which among other things adds HDMI functionality (no 4K yet). Signed-off-by: Florian Fainelli <[email protected]>
2020-09-10ARM: dts: broadcom: Fix SP804 nodeAndre Przywara1-2/+2
The DT binding for SP804 requires to have an "arm,primecell" compatible string. Add this string so that the Linux primecell bus driver picks the device up and activates the clock. Signed-off-by: Andre Przywara <[email protected]> Tested-by: Florian Fainelli <[email protected]> [florian: added compatible to ccbtimer1] Signed-off-by: Florian Fainelli <[email protected]>
2020-09-10ARM: dts: NSP: Fix SP805 clock-namesAndre Przywara1-1/+1
The SP805 binding sets the name for the actual watchdog clock to "wdog_clk" (with an underscore). Change the name in the DTs for the Broadcom NSP platform to match that. The Linux and U-Boot driver use the *first* clock for this purpose anyway, so it does not break anything. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Ray Jui <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.