aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2020-10-28ARM: dts: imx7-mba7: specify USB over-current polarityMatthias Schiffer1-0/+1
Add over-current-active-low to usbotg1. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-28ARM: dts: imx7-mba7: enable RS485 on UART7Matthias Schiffer1-0/+3
The UART7 interface is connected to a full-duplex RS485 transceiver. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-28ARM: dts: imx7-mba7: add audio supportMatthias Schiffer1-1/+37
The MBa7x is equipped with a TI TLV320AIC3204 audio codec. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-28ARM: dts: imx7-mba7: update MMC aliasesMatthias Schiffer1-0/+6
Together with the recently merged support for alias-based MMC host numbering, this makes the MMC devices names match what the bootloader expects. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-28ARM: dts: imx7-mba7: configure watchdogMatthias Schiffer1-0/+12
The external watchdog reset is necessary, as the internal reset is unreliable on i.MX7. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-28ARM: dts: imx7-mba7: disable ethernet PHY clock outputsMatthias Schiffer2-0/+2
The clock outputs are not connected. Disable them to improve EMI behaviour. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-28ARM: dts: imx7-mba7: remove unsupported PHY LED setupMatthias Schiffer2-8/+0
These properties were never supported by the DP83867, and a patch implementing them was rejected in favor of a different solution. Remove them. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-28ARM: dts: imx7-mba7: drop incorrect num-chipselects propertyMatthias Schiffer1-2/+0
This property was never set correctly; it should have been num-cs. As num-cs support is being removed as well, simply drop it. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-28ARM: dts: imx7-mba7: update compatible stringsMatthias Schiffer2-2/+2
Include the SoM compatible string. Signed-off-by: Matthias Schiffer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-28ARM: dts: imx6q-icore-ofcap10: Use 10.1" Ampire panel compatibleJagan Teki1-12/+16
Adding display timings directly on device tree files make it difficult to maintain as a same copy of timings may exist on different files or panel-simple driver. We have a panel-simple driver for this particular usage so supporting on this driver will help to use the same timings on any device tree files if the board mounted on a similar vendor display. Engicam C.TOUCH OF 10.1" LCD board uses Ampire 10.1" TFT LCD and it has supported by panel-simple already, so simply use that binding. Signed-off-by: Jagan Teki <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2020-10-28ARM: dts: Fix label address for 64MiB OpenBMC flash layoutGeorge Liu1-4/+4
Signed-off-by: George Liu <[email protected]> Reviewed-by: John Wang <[email protected]> Acked-by: Andrew Jeffery <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-10-28ARM: dts: aspeed: g220a: Add some gpiosJohn Wang1-2/+2
Add GPIO STRAP_BMC_BATTERY_GPIOS5, which is used for battery adc sensor. Change the INTRUDER_N to CHASSIS_INTRUSION, to make it more meaningful. Signed-off-by: John Wang <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-10-28ARM: dts: aspeed: Add Bytedance g220a BMC machineLotus Xu2-0/+925
The g220a is a server platform with an ASPEED AST2500 BMC. Signed-off-by: Lotus Xu <[email protected]> Signed-off-by: John Wang <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-10-28ARM: dts: Add 64MiB OpenBMC flash layoutJohn Wang1-0/+35
This is an alternate layout used by OpenBMC systems The division of space is as follows: u-boot + env: 0.5MB kernel/FIT: 5MB rofs: 42.5MB rwfs: 16MB Signed-off-by: John Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-10-28ARM: dts: aspeed: s2600wf: Fix VGA memory region locationJoel Stanley1-2/+2
The VGA memory region is always from the top of RAM. On this board, that is 0x80000000 + 0x20000000 - 0x01000000 = 0x9f000000. This was not an issue in practice as the region is "reserved" by the vendor's u-boot reducing the amount of available RAM, and the only user is the host VGA device poking at RAM over PCIe. That is, nothing from the ARM touches it. It is worth fixing as developers copy existing device trees when building their machines, and the XDMA driver does use the memory region from the ARM side. Fixes: c4043ecac34a ("ARM: dts: aspeed: Add S2600WF BMC Machine") Reported-by: John Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-10-28ARM: dts: aspeed: amd-ethanolx: Update KCS nodes to use v2 bindingKonstantin Aladyshev1-3/+3
KCS nodes compatible property was changed in the dtsi to use v2 binding before ethanolx was merged, making the ethanolx device tree incorrect. Update it to use the new binding so the driver loads. Fixes: fa4c8ec6feaa ("ARM: dts: aspeed: Change KCS nodes to v2 binding") Signed-off-by: Konstantin Aladyshev <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-10-28ARM: dts: aspeed-g6: Fix the GPIO memory sizeBilly Tsai1-1/+1
The GPIO controller is a GPIO controller followed by some SGPIO controllers, which are a different type of device with their own binding and drivers. Make the gpio node cover the only conventional GPIO controller. Fixes: 8dbcb5b709b9 ("ARM: dts: aspeed-g6: Add gpio devices") Signed-off-by: Billy Tsai <[email protected]> Reviewed-by: Andrew Jeffery <[email protected]> Reviewed-by: Joel Stanley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joel Stanley <[email protected]>
2020-10-27ARM: dts: exynos: Remove 'opp-shared' from Exynos4412 bus OPP-tablesMarek Szyprowski1-6/+0
Commits 1019fe2c7280 ("ARM: dts: exynos: Adjust bus related OPPs to the values correct for Exynos5422 Odroids") and 9ff416cf45a0 ("ARM: dts: exynos: Disable frequency scaling for FSYS bus on Odroid XU3 family") revealed that 'opp-shared' property for the Exynos bus OPPs was used incorrectly, what had the side-effect of disabling frequency scaling for the second and latter buses sharing given OPP-table. Fix this by removing bogus 'opp-shared' properties from Exynos4412 bus OPP-tables. This restores frequency scaling for the following buses: C2C, RightBus, and MFC. Signed-off-by: Marek Szyprowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-10-27ARM: dts: exynos: Remove 'opp-shared' from Exynos3 bus OPP-tablesMarek Szyprowski1-5/+0
Commits 1019fe2c7280 ("ARM: dts: exynos: Adjust bus related OPPs to the values correct for Exynos5422 Odroids") and 9ff416cf45a0 ("ARM: dts: exynos: Disable frequency scaling for FSYS bus on Odroid XU3 family") revealed that 'opp-shared' property for the Exynos bus OPPs was used incorrectly, what had the side-effect of disabling frequency scaling for the second and latter buses sharing given OPP-table. Fix this by removing bogus 'opp-shared' properties from Exynos3 bus OPP-tables. This restores frequency scaling for the following buses: RightBus, LCD0, FSYS and MFC. Signed-off-by: Marek Szyprowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-10-27ARM: dts: sun8i: add FriendlyArm ZeroPi supportYu-Tung Chang2-0/+86
The ZeroPi is another fun board developed by FriendlyELEC for makers, hobbyists and fans. ZeroPi key features - Allwinner H3, Quad-core [email protected] - 256MB/512MB DDR3 RAM - microsd slot - 10/100/1000Mbps Ethernet - Debug Serial Port - DC 5V/2A power-supply Signed-off-by: Yu-Tung Chang <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: exynos: Remove interrupts from DMC controller in Exynos5422Lukasz Luba1-3/+0
The interrupts in Dynamic Memory Controller in Exynos5422 and Odroid XU3-family boards are no longer needed. They have been used in order to workaround some issues in scheduled work in devfreq. Now when the devfreq framework design is improved, remove the interrupt driven approach and rely on devfreq monitoring mechanism with fixed intervals. Reported-by: Willy Wolff <[email protected]> Signed-off-by: Lukasz Luba <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-10-26ARM: dts: exynos: Harmonize DWC USB3 DT nodes nameSerge Semin2-3/+3
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-10-26ARM: dts: exynos: Correct DWC USB3 compatible stringSerge Semin1-1/+1
Syonpsys IP cores are supposed to be defined with "snps" vendor-prefix. Use it instead of the deprecated "synopsys" one. Signed-off-by: Serge Semin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-10-26ARM: dts: exynos: disable pull up of USB 3.0 over-current on Odroid XUKrzysztof Kozlowski1-0/+10
The Odroid XU has external pull ups for USB 3.0 over-current pins, so disable the internal one. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Gabriel Ribba Esteva <[email protected]>
2020-10-26ARM: dts: exynos: fix USB 3.0 pins supply being turned off on Odroid XUKrzysztof Kozlowski1-0/+2
On Odroid XU LDO12 and LDO15 supplies the power to USB 3.0 blocks but the GPK GPIO pins are supplied by LDO7 (VDDQ_LCD). LDO7 also supplies GPJ GPIO pins. The Exynos pinctrl driver does not take any supplies, so to have entire GPIO block always available, make the regulator always on. Fixes: 88644b4c750b ("ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board") Signed-off-by: Krzysztof Kozlowski <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Gabriel Ribba Esteva <[email protected]>
2020-10-26ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410Krzysztof Kozlowski2-0/+32
The VBUS control (PWREN) and over-current pins of USB 3.0 DWC3 controllers are on Exynos5410 regular GPIOs. This is different than for example on Exynos5422 where these are special ETC pins with proper reset values (pulls, functions). Therefore these pins should be configured to enable proper USB 3.0 peripheral and host modes. This also fixes over-current warning: [ 6.024658] usb usb4-port1: over-current condition [ 6.028271] usb usb3-port1: over-current condition Fixes: cb0896562228 ("ARM: dts: exynos: Add USB to Exynos5410") Signed-off-by: Krzysztof Kozlowski <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Gabriel Ribba Esteva <[email protected]>
2020-10-26ARM: dts: exynos: fix roles of USB 3.0 ports on Odroid XUKrzysztof Kozlowski1-2/+2
On Odroid XU board the USB3-0 port is a microUSB and USB3-1 port is USB type A (host). The roles were copied from Odroid XU3 (Exynos5422) design which has it reversed. Fixes: 8149afe4dbf9 ("ARM: dts: exynos: Add initial support for Odroid XU board") Signed-off-by: Krzysztof Kozlowski <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Gabriel Ribba Esteva <[email protected]>
2020-10-26ARM: dts: exynos: Fix schema warnings for pwm-ledsAlexander Dahl3-9/+10
The node names for devices using the pwm-leds driver follow a certain naming scheme (now). Parent node name is not enforced, but recommended by DT project. arch/arm/boot/dts/exynos5410-odroidxu.dt.yaml: pwmleds: 'blueled', 'greenled' do not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' arch/arm/boot/dts/exynos5422-odroidhc1.dt.yaml: pwmleds: 'blueled' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/leds/leds-pwm.yaml Signed-off-by: Alexander Dahl <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Krzysztof Kozlowski <[email protected]>
2020-10-26ARM: dts: qcom: msm8974-klte: Add support for SD cardIskren Chernev1-1/+43
The Samsung Galaxy S5 (klte), has 3 SDHCI nodes used for internal storage, WiFi, external SD card slot. The external SD card slot is similar to the internal storage. Signed-off-by: Iskren Chernev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-10-26ARM: dts: qcom: msm8974-klte: Add support for wifiIskren Chernev1-0/+74
The Samsung Galaxy S5 (klte), uses a Broadcom 4354 Chip connected on the SDIO bus. The chip also requires a corresponding firmware + txt file[1]. [1] https://gitlab.com/postmarketOS/pmaports/-/blob/master/firmware/firmware-samsung-klte/APKBUILD Signed-off-by: Iskren Chernev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-10-26ARM: dts: qcom: msm8974-klte: Add gpio expander chipIskren Chernev1-2/+27
The Samsung Galaxy S5 has a GPIO Expander chip, the PCAL6416A with 16 ports on a i2c bus. These pins are used for WiFi, NFC, IR among other things. Signed-off-by: Iskren Chernev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-10-26ARM: dts: qcom: msm8974-klte: Add support for ledIskren Chernev1-0/+48
The klte uses a Panasonic AN30259A LED controller for it's indicator led. Signed-off-by: Iskren Chernev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-10-26ARM: dts: qcom: msm8974-klte: Add support for touchscreenIskren Chernev1-0/+54
Add support for the touchscreen found on the Samsung Galaxy S5. Signed-off-by: Iskren Chernev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-10-26ARM: dts: qcom: msm8974-klte: Add support for touchkeyIskren Chernev1-1/+43
Add support for the touchkey found on the Samsung Galaxy S5. The touchkey is responsible for handling the application and back buttons found around the home button. Signed-off-by: Iskren Chernev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-10-26ARM: dts: qcom: msm8974-klte: Merge pinctrl nodesIskren Chernev1-12/+10
commit cd13c72c1853f219e1f ("ARM: dts: qcom: msm8974-klte: Add max77826 pmic node") and commit 8bf7a360a92cc6b2aebc8 ("ARM: dts: qcom: msm8974-klte: Add sdhci1 node") both added pinctrl node. This patch merges the two nodes. Signed-off-by: Iskren Chernev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2020-10-26ARM: dts: sunxi: bananapi-m2-plus: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the Bananapi M2+ has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 8c7ba536e709 ("ARM: sun8i: bananapi-m2-plus: Enable dwmac-sun8i") Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Fixes: aa8fee415f46 ("ARM: dts: sun8i: h3: Split out non-SoC-specific parts of Bananapi M2 Plus") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Tested-by: Jernej Skrabec <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: sun9i: Enable both RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai2-2/+2
The Ethernet PHY on the Cubieboard 4 and A80 Optimus have the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 98048143b7f8 ("ARM: dts: sun9i: cubieboard4: Enable GMAC") Fixes: bc9bd03a44f9 ("ARM: dts: sun9i: a80-optimus: Enable GMAC") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: sun8i: a83t: Enable both RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai2-2/+2
The Ethernet PHY on the Bananapi M3 and Cubietruck Plus have the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 039359948a4b ("ARM: dts: sun8i: a83t: Enable Ethernet on two boards") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: sun8i: h3: orangepi-plus2e: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the Orange Pi Plus 2E has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Fixes: 7a78ef92cdc5 ("ARM: sun8i: h3: Enable EMAC with external PHY on Orange Pi Plus 2E") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Tested-by: Jernej Skrabec <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: sun7i: bananapi-m1-plus: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the Bananapi M1+ has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 04c85ecad32a ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus board") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: sun7i: cubietruck: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the Cubietruck has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: 67073d97672d ("ARM: dts: sun7i: cubietruck: Enable the GMAC") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Tested-by: Emilio López <[email protected]> Reviewed-by: Emilio López <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: sun6i: a31-hummingbird: Enable RGMII RX/TX delay on Ethernet PHYChen-Yu Tsai1-1/+1
The Ethernet PHY on the A31 Hummingbird has the RX and TX delays enabled on the PHY, using pull-ups on the RXDLY and TXDLY pins. Fix the phy-mode description to correct reflect this so that the implementation doesn't reconfigure the delays incorrectly. This happened with commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config"). Fixes: c220aec2bb79 ("ARM: dts: sun6i: Add Merrii A31 Hummingbird support") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26Revert "arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high"Chen-Yu Tsai1-5/+0
This reverts commit 75ee680cbd2e4d0156b94f9fec50076361ab12f2. Turns out the activity and link LEDs on the RJ45 port are active low, just like on the Orange Pi PC. Revert the commit that says otherwise. Fixes: 75ee680cbd2e ("arm: sun8i: orangepi-pc-plus: Set EMAC activity LEDs to active high") Fixes: 4904337fe34f ("ARM: dts: sunxi: Restore EMAC changes (boards)") Signed-off-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Tested-by: Jernej Skrabec <[email protected]> Acked-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: sun8i: r40: bananapi-m2-ultra: Fix ethernet nodeJernej Skrabec1-1/+1
Ethernet PHY on BananaPi M2 Ultra provides RX and TX delays. Fix ethernet node to reflect that fact. Fixes: c36fd5a48bd2 ("ARM: dts: sun8i: r40: bananapi-m2-ultra: Enable GMAC ethernet controller") Signed-off-by: Jernej Skrabec <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-26ARM: dts: mmp2-olpc-xo-1-75: Use plural form of "-gpios"Lubomir Rintel1-2/+2
This makes validation happier. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lubomir Rintel <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-26ARM: dts: mmp3: Add power domain for the cameraLubomir Rintel1-0/+2
The camera interfaces on MMP3 are on a separate power island that needs to be turned on for them to operate and, ideally, turned off when the cameras are not in use. This hooks the power island with the camera interfaces in the device tree. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lubomir Rintel <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-26Merge tag 'sunxi-fixes-for-5.9-2' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes One fix for an unreasonable thermal trip point on the A10 * tag 'sunxi-fixes-for-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun4i-a10: fix cpu_alert temperature Link: https://lore.kernel.org/r/3c95a95f-c6fa-4b34-823b-ddaa7660d274.lettre@localhost Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-26ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Enable VIN instancesLad Prabhakar1-0/+222
Enable VIN instances along with OV5640 as endpoints on the adapter board. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Biju Das <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-10-26ARM: dts: r8a7742-iwg21d-q7: Add LCD supportLad Prabhakar1-0/+99
The iwg21d comes with a 7" capacitive touch screen, therefore add support for it. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Marian-Cristian Rotariu <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-10-26ARM: dts: imx: align GPIO hog names with dtschemaKrzysztof Kozlowski3-6/+6
dtschema for GPIO controllers expects GPIO hogs to end with 'hog' suffix. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.