aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/stm32mp157a-avenger96.dts
AgeCommit message (Collapse)AuthorFilesLines
2020-05-14ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 boardMarek Vasut1-615/+3
The Avenger96 is in fact an assembly of DH Electronics DHCOR SoM on top of an Avenger96 reference board. The DHCOR SoM can be populated with any STM32MP15xx. Split the DTs to reflect this such that the common SoM and Avenger96 parts are now in stm32mp15xx-dhcor-*dtsi and a specific example implementation of STM32MP157A SoM and Avenger96 board is separated into stm32mp157a-dhcor-*dts* . The stm32mp157a-avenger96.dts is retained for the sake of backward naming compatibility. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-07ARM: dts: stm32: Add bindings for SPI2 on AV96Marek Vasut1-0/+9
Add SPI2 bindings to AV96 DT, the SPI2 IOs are present on low-speed expansion connector X6. This is disabled by default and can be enabled if something is connected there. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-07ARM: dts: stm32: Add bindings for ADC on AV96Marek Vasut1-0/+21
Add ADC bindings to AV96 DT, the ADC inputs are present on low-speed expansion connector X6. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-07ARM: dts: stm32: Add bindings for FDCAN2 on AV96Marek Vasut1-0/+7
Add FDCAN2 bindings to AV96 DT, the FDCAN2 is present on low-speed expansion connector X6. This is disabled by default to match the 96boards specification though. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-07ARM: dts: stm32: Add bindings for FDCAN1 on AV96Marek Vasut1-0/+7
Add FDCAN1 bindings to AV96 DT, the FDCAN1 is present on low-speed expansion connector X6. This is disabled by default to match the 96boards specification though. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-07ARM: dts: stm32: Repair I2C2 operation on AV96Marek Vasut1-3/+3
The I2C2 uses different pinmux on AV96, use correct pinmux and also add comments about the I2C being present on the "low-speed" expansion connector X6. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Rename LEDs to match silkscreen on AV96Marek Vasut1-3/+3
The LED labels do not match the silkscreen on the board, fix it. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add bindings for USB on AV96Marek Vasut1-0/+31
Fill in the bindings for USB host and gadget on AV96. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add bindings for audio on AV96Marek Vasut1-0/+39
Fill in the bindings for HDMI audio on AV96, this permits audio playback via attached HDMI device if such device supports it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add bindings for HDMI video on AV96Marek Vasut1-0/+79
Fill in the HDMI video pipeline from AV96 into the DT. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Enable Bluetooth on AV96Marek Vasut1-7/+16
The WiFi/Bluetooth chip is attached to USART2 on AV96 as well, describe it in DT to make it available. Remove BT LED and turn it into a shutdown GPIO, because the GPIO line controls the BT_REG_ON signal. The LED is just an indicator connected to the same line, but not the primary function. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Enable WiFi on AV96Marek Vasut1-7/+31
The WiFi/Bluetooth SDIO chip is attached to SDMMC3 on AV96, describe it in DT to make it available. Remove WiFi LED and turn it into a regulator, because it is a GPIO controlling the WL_REG_ON input of the WiFi chip. The LED is just an indicator connected to the same line, but not the primary function. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add configuration EEPROM on AV96Marek Vasut1-0/+6
The board has an EEPROM on the same I2C bus as PMIC, at address 0x53. The EEPROM contains the board MAC address. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add QSPI NOR on AV96Marek Vasut1-0/+20
The DH Electronics DHCOR SOM has QSPI NOR on the SoM itself, add it into the DT. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add eMMC attached to SDMMC2 on AV96Marek Vasut1-0/+16
Add DT node describing the eMMC attached to SDMMC2 controller of the STM32MP1 on DHCOR SoM, which is the SoM soldered on AV96. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Repair SDMMC1 operation on AV96Marek Vasut1-3/+18
The SD uses different pinmux for the D123DIRline, use such a pinmux, otherwise there is a pinmux collision on the AV96. Add missing SD voltage regulator switch. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add missing ethernet PHY skews on AV96Marek Vasut1-0/+14
The KS9031 PHY supports configurable PHY skews to compensate for the board routing. Fill in the correct values. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Add missing ethernet PHY reset on AV96Marek Vasut1-0/+3
Add PHY reset GPIO on AV96 ethernet PHY. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Repair ethernet operation on AV96Marek Vasut1-2/+2
The AV96 RGMII uses different pinmux for ETH_RGMII_TXD0, ETH_RGMII_RXD2 and ETH_RGMII_TX_CTL. Use the correct pinmux to make ethernet operational. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Repair PMIC interrupt on AV96Marek Vasut1-9/+1
The PMIC interrupt line is connected to PA0 on the DHCOR SoM, fix it. This makes the POWER button on the AV96 working, and also all the other PMIC interrupts. Furthermore, scrub the bogus interrupt-parent props. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-29ARM: dts: stm32: Repair PMIC configuration on AV96Marek Vasut1-3/+15
The vdd PMIC buck regulator was misconfigured, which caused instability of the board and malfunction of high-speed interfaces, like the RGMII. Configure the PMIC correctly to repair these problems. Also add missing Enpirion regulator for the IO voltage into the DT. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-20ARM: dts: stm32: use uniform label names for sleep pinctrl phandlesAhmad Fatoum1-1/+1
Some labels follow the *_sleep_pins_* naming scheme, but some also use *_pins_sleep_*. Because most labels use the former and for uniformity with variants like sdmmc1_b4_pins_a and sdmmc1_dir_pins_a, adopt the *_sleep_pins_* scheme throughout. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-03-13ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boardsYann Gautier1-0/+1
On STM32MP1 DK1, DK2, ED1 and EV1 boards, there is only a micro SD socket. This is also the case on Avenger board. They don't support the Write Protect pin. The disable-wp is then added in the SD-cards sdmmc1 nodes. This avoids executing some code and a warning during driver probe. Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-03-13ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boardsYann Gautier1-1/+1
The broken-cd properties are replaced with cd-gpios, with the correct GPIO to detect the card insertion. The GPIO lines require a pull-up. Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-03-13ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boardsBenjamin Gaignard1-4/+0
Remove unused properties from stpmic node. The issues have been detected by running dtbs_check. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-02-10ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic nodeBenjamin Gaignard1-4/+0
Theses 3 properties are not coded in driver so remove them from the DTS. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-12-09ARM: dts: stm32: Introduce new STM32MP15 SOCs: STM32MP151 and STM32MP153Alexandre Torgue1-1/+1
STM32MP151 and STM32MP153 were not explicitly supported through stm32mp157c.dts. This commit adds dedicated files to support all STM32MP15 SOCs family. The differences between those SOCs are: -STM32MP151 [1]: common file. -STM32MP153 [2]: STM32MP151 + CANs + a second CortexA7-CPU. -STM32MP157 [3]: STM32MP153 + DSI + GPU. [1] https://www.st.com/resource/en/reference_manual/dm00366349.pdf [2] https://www.st.com/resource/en/reference_manual/dm00366355.pdf [3] https://www.st.com/resource/en/reference_manual/dm00327659.pdf Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-12-09ARM: dts: stm32: Update stm32mp157 pinctrl filesAlexandre Torgue1-1/+2
In order to cover the STM32MP15 SOCs family this commit updates pinctrl file names (group definition and packages files). This family includes: STM32MP151, STM32MP153 and STM32MP157. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: disable active-discharge for vbus_otg on stm32mp157a-avenger96Pascal Paillet1-1/+0
Active discharge is not needed on vbus_otg and generate unneeded current consumption. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: Fix active discharge usage on stm32mp157Pascal Paillet1-2/+2
Active discharge is a uint32 not a boolean. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: add PWR regulators support on stm32mp157Pascal Paillet1-0/+5
This patch adds support of STM32 PWR regulators on stm32mp157c. This replace dummy fixed regulators on stm32mp157c-ed1 and stm32mp157c-dk2. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-06-21ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157AManivannan Sadhasivam1-0/+321
Add devicetree support for Avenger96 board based on STM32MP157A MPU from ST Micro. This board is one of the 96Boards Consumer Edition board from Arrow Electronics and has the following features: SoC: STM32MP157AAC PMIC: STPMIC1A RAM: 1024 Mbyte @ 533MHz Storage: eMMC v4.51: 8 Gbyte microSD Socket: UHS-1 v3.01 Ethernet Port: 10/100/1000 Mbit/s, IEEE 802.3 Compliant Wireless: WiFi 5 GHz & 2.4GHz IEEE 802.11a/b/g/n/ac Bluetooth®v4.2 (BR/EDR/BLE) USB: 2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG Display: HDMI: WXGA (1366x768)@ 60 fps, HDMI 1.4 LED: 4x User LED, 1x WiFi LED, 1x BT LED More information about this board can be found in 96Boards website: https://www.96boards.org/product/avenger96/ Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Powered by cgit, Gruvboxed by Blaster4385.