aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi
AgeCommit message (Collapse)AuthorFilesLines
2020-11-30ARM: dts: rockchip: Add SDIO0 node for VMARC SOMJagan Teki1-0/+21
Rockchip RK3288 and RK3399Pro based VMARC SOM has sdio0 for connecting WiFi/BT devices as a pluggable card via M.2 E-Key. Add associated sdio0 nodes, properties. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20201023181814.220974-2-jagan@amarulasolutions.com [moved the unrelated rtc addition to a separate patch] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-22ARM: dts: rockchip: Add HDMI out for RockPI N8/N10Jagan Teki1-0/+20
This patch adds support to enable HDMI out for N10 and N8 combinations SBCs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Link: https://lore.kernel.org/r/20200720110230.367985-2-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-22ARM: dts: rockchip: Add USB for RockPI N8/N10Jagan Teki1-0/+18
Radxa dalang carrier board has 2x USB 2.0 and 1x USB 3.0 ports. This patch adds support to enable all these USB ports for N10 and N8 combinations SBCs. Note that the USB 3.0 port on RockPI N8 combination works as USB 2.0 OTG since it is driven from RK3288. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200720110230.367985-1-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18arm64: dts: rk3399pro: vmarc-som: Move common properties into CarrierJagan Teki1-4/+14
Some of gmac, sdmmc node properties are common across rk3288 and rk3399pro SOM's so move them into Carrier dtsi. Chosen node is specific to rk3399pro configure SBC, so move it into RockPI N10 dts. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-5-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18arm64: dts: rk3399pro: vmarc-som: Move supply regulators into CarrierJagan Teki1-0/+19
Supply regulators are common across different variants of vmarc SOM's since the Type C power controller IC is part of the carrier board. So, move the supply regulators into carrier board dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-4-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-18ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOMJagan Teki1-32/+0
I2C nodes and associated slave devices defined in Carrier board are specific to rk3399pro vmrac SOM. So, move them into SOM dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-2-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-12-21ARM: dts: rockchip: Add Radxa Dalang Carrier boardJagan Teki1-0/+81
Carrier board often referred as baseboard. For making complete SBC or any other industrial boards, these carrier boards will be used with associated SOMs. Radxa has Dalang carrier board which supports on-board peripherals, ports like USB-2.0, USB-3.0, HDMI, MIPI DSI/CSI, eDP, Ethernet, WiFi, PCIe, USB-C, 40-Pin GPIO header and etc. Right now Dalang carrier board is used with two SBC-variants: Rock Pi N10 => VMARC RK3399Por SOM + Dalang carrier board Rock Pi N8 => VMARC RK3288 SOM + Dalang carrier board(+codec) So add this carrier board dtsi as a separate file in ARM directory, so-that the same can reuse it in both rk3288, rk3399pro variants of Rockchip SOMs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20191216174711.17856-4-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Powered by cgit, Gruvboxed by Blaster4385.