| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Trap handler for syscall tracing reads EFA (Exception Fault Address),
in case strace wants PC of trap instruction (EFA is not part of pt_regs
as of current code).
However this EFA read is racy as it happens after dropping to pure
kernel mode (re-enabling interrupts). A taken interrupt could
context-switch, trigger a different task's trap, clobbering EFA for this
execution context.
Fix this by reading EFA early, before re-enabling interrupts. A slight
side benefit is de-duplication of FAKE_RET_FROM_EXCPN in trap handler.
The trap handler is common to both ARCompact and ARCv2 builds too.
This just came out of code rework/review and no real problem was reported
but is clearly a potential problem specially for strace.
Cc: <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.
This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.
There are a variety of indentation styles found.
a) 4 spaces + '---help---'
b) 7 spaces + '---help---'
c) 8 spaces + '---help---'
d) 1 space + 1 tab + '---help---'
e) 1 tab + '---help---' (correct indentation)
f) 1 tab + 1 space + '---help---'
g) 1 tab + 2 spaces + '---help---'
In order to convert all of them to 1 tab + 'help', I ran the
following commend:
$ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Convert comments that reference mmap_sem to reference mmap_lock instead.
[[email protected]: fix up linux-next leftovers]
[[email protected]: s/lockaphore/lock/, per Vlastimil]
[[email protected]: more linux-next fixups, per Michel]
Signed-off-by: Michel Lespinasse <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Reviewed-by: Daniel Jordan <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Laurent Dufour <[email protected]>
Cc: Liam Howlett <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ying Han <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.
The change is generated using coccinelle with the following rule:
// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .
@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)
Signed-off-by: Michel Lespinasse <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Daniel Jordan <[email protected]>
Reviewed-by: Laurent Dufour <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jason Gunthorpe <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: John Hubbard <[email protected]>
Cc: Liam Howlett <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Ying Han <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
All architectures define pte_index() as
(address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)
and all architectures define pte_offset_kernel() as an entry in the array
of PTEs indexed by the pte_index().
For the most architectures the pte_offset_kernel() implementation relies
on the availability of pmd_page_vaddr() that converts a PMD entry value to
the virtual address of the page containing PTEs array.
Let's move x86 definitions of the PTE accessors to the generic place in
<linux/pgtable.h> and then simply drop the respective definitions from the
other architectures.
The architectures that didn't provide pmd_page_vaddr() are updated to have
that defined.
The generic implementation of pte_offset_kernel() can be overridden by an
architecture and alpha makes use of this because it has special ordering
requirements for its version of pte_offset_kernel().
[[email protected]: v2]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: update]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: update]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: fix x86 warning]
[[email protected]: fix powerpc build]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The powerpc 32-bit implementation of pgtable has nice shortcuts for
accessing kernel PMD and PTE for a given virtual address. Make these
helpers available for all architectures.
[[email protected]: microblaze: fix page table traversal in setup_rt_frame()]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: s/pmd_ptr_k/pmd_off_k/ in various powerpc places]
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes. Fix this up with the aid of
the below script and manual adjustments here and there.
import sys
import re
if len(sys.argv) is not 3:
print "USAGE: %s <file> <header>" % (sys.argv[0])
sys.exit(1)
hdr_to_move="#include <linux/%s>" % sys.argv[2]
moved = False
in_hdrs = False
with open(sys.argv[1], "r") as f:
lines = f.readlines()
for _line in lines:
line = _line.rstrip('
')
if line == hdr_to_move:
continue
if line.startswith("#include <linux/"):
in_hdrs = True
elif not moved and in_hdrs:
moved = True
print hdr_to_move
print line
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vincent Chen <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
As a good side-effect header "Stack Trace:" is now printed with the same
log level as the rest of backtrace.
[1]: https://lore.kernel.org/lkml/[email protected]/T/#u
Signed-off-by: Dmitry Safonov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Vineet Gupta <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Most architectures define kmap_prot to be PAGE_KERNEL.
Let sparc and xtensa define there own and define PAGE_KERNEL as the
default if not overridden.
[[email protected]: coding style fixes]
Suggested-by: Christoph Hellwig <[email protected]>
Signed-off-by: Ira Weiny <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christian König <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
To support kmap_atomic_prot(), all architectures need to support
protections passed to their kmap_atomic_high() function. Pass protections
into kmap_atomic_high() and change the name to kmap_atomic_high_prot() to
match.
Then define kmap_atomic_prot() as a core function which calls
kmap_atomic_high_prot() when needed.
Finally, redefine kmap_atomic() as a wrapper of kmap_atomic_prot() with
the default kmap_prot exported by the architectures.
Signed-off-by: Ira Weiny <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christian König <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Every single architecture (including !CONFIG_HIGHMEM) calls...
pagefault_enable();
preempt_enable();
... before returning from __kunmap_atomic(). Lift this code into the
kunmap_atomic() macro.
While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to
be consistent.
[[email protected]: don't enable pagefault/preempt twice]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: coding style fixes]
Signed-off-by: Ira Weiny <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christian König <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Guenter Roeck <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Every arch has the same code to ensure atomic operations and a check for
!HIGHMEM page.
Remove the duplicate code by defining a core kmap_atomic() which only
calls the arch specific kmap_atomic_high() when the page is high memory.
[[email protected]: coding style fixes]
Signed-off-by: Ira Weiny <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christian König <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
All architectures do exactly the same thing for kunmap(); remove all the
duplicate definitions and lift the call to the core.
This also has the benefit of changing kmap_unmap() on a number of
architectures to be an inline call rather than an actual function.
[[email protected]: fix CONFIG_HIGHMEM=n build on various architectures]
Signed-off-by: Ira Weiny <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christian König <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The kmap code for all the architectures is almost 100% identical.
Lift the common code to the core. Use ARCH_HAS_KMAP_FLUSH_TLB to indicate
if an arch defines kmap_flush_tlb() and call if if needed.
This also has the benefit of changing kmap() on a number of architectures
to be an inline call rather than an actual function.
Signed-off-by: Ira Weiny <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Christian König <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Patch series "Remove duplicated kmap code", v3.
The kmap infrastructure has been copied almost verbatim to every
architecture. This series consolidates obvious duplicated code by
defining core functions which call into the architectures only when
needed.
Some of the k[un]map_atomic() implementations have some similarities but
the similarities were not sufficient to warrant further changes.
In addition we remove a duplicate implementation of kmap() in DRM.
This patch (of 15):
Replace the use of BUG_ON(in_interrupt()) in the kmap() and kunmap() in
favor of might_sleep().
Besides the benefits of might_sleep(), this normalizes the implementations
such that they can be made generic in subsequent patches.
Signed-off-by: Ira Weiny <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Christian König <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Chris Zankel <[email protected]>
Cc: Max Filippov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This adds tests which will validate architecture page table helpers and
other accessors in their compliance with expected generic MM semantics.
This will help various architectures in validating changes to existing
page table helpers or addition of new ones.
This test covers basic page table entry transformations including but not
limited to old, young, dirty, clean, write, write protect etc at various
level along with populating intermediate entries with next page table page
and validating them.
Test page table pages are allocated from system memory with required size
and alignments. The mapped pfns at page table levels are derived from a
real pfn representing a valid kernel text symbol. This test gets called
via late_initcall().
This test gets built and run when CONFIG_DEBUG_VM_PGTABLE is selected.
Any architecture, which is willing to subscribe this test will need to
select ARCH_HAS_DEBUG_VM_PGTABLE. For now this is limited to arc, arm64,
x86, s390 and powerpc platforms where the test is known to build and run
successfully Going forward, other architectures too can subscribe the test
after fixing any build or runtime problems with their page table helpers.
Folks interested in making sure that a given platform's page table helpers
conform to expected generic MM semantics should enable the above config
which will just trigger this test during boot. Any non conformity here
will be reported as an warning which would need to be fixed. This test
will help catch any changes to the agreed upon semantics expected from
generic MM and enable platforms to accommodate it thereafter.
[[email protected]: v17]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: v18]
Link: http://lkml.kernel.org/r/[email protected]
Suggested-by: Catalin Marinas <[email protected]>
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Qian Cai <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Gerald Schaefer <[email protected]> [s390]
Tested-by: Christophe Leroy <[email protected]> [ppc32]
Reviewed-by: Ingo Molnar <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Vasily Gorbik <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Palmer Dabbelt <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
pmd_present() is expected to test positive after pmdp_mknotpresent() as
the PMD entry still points to a valid huge page in memory.
pmdp_mknotpresent() implies that given PMD entry is just invalidated from
MMU perspective while still holding on to pmd_page() referred valid huge
page thus also clearing pmd_present() test. This creates the following
situation which is counter intuitive.
[pmd_present(pmd_mknotpresent(pmd)) = true]
This renames pmd_mknotpresent() as pmd_mkinvalid() reflecting the helper's
functionality more accurately while changing the above mentioned situation
as follows. This does not create any functional change.
[pmd_present(pmd_mkinvalid(pmd)) = true]
This is not applicable for platforms that define own pmdp_invalidate() via
__HAVE_ARCH_PMDP_INVALIDATE. Suggestion for renaming came during a
previous discussion here.
https://patchwork.kernel.org/patch/11019637/
[[email protected]: change pmd_mknotvalid() to pmd_mkinvalid() per Will]
Link: http://lkml.kernel.org/r/[email protected]
Suggested-by: Catalin Marinas <[email protected]>
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Russell King <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Mackerras <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Some architectures (e.g. ARC) have the ZONE_HIGHMEM zone below the
ZONE_NORMAL. Allowing free_area_init() parse max_zone_pfn array even it
is sorted in descending order allows using free_area_init() on such
architectures.
Add top -> down traversal of max_zone_pfn array in free_area_init() and
use the latter in ARC node/zone initialization.
[[email protected]: ARC fix]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: arc: free_area_init(): take into account PAE40 mode]
Link: http://lkml.kernel.org/r/[email protected]
[[email protected]: declare arch_has_descending_max_zone_pfns()]
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Hoan Tran <[email protected]> [arm64]
Reviewed-by: Baoquan He <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Greentime Hu <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Helge Deller <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Matt Turner <[email protected]>
Cc: Max Filippov <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Richard Weinberger <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: Russell King <[email protected]>
Cc: Stafford Horne <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Guenter Roeck <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- fix recent DSP code regression on ARC700 platforms
- fix thinkos in ICCM/DCCM size checks
- USB regression fix
- other small fixes here and there
* tag 'arc-5.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: show_regs: avoid extra line of output
ARC: guard dsp early init against non ARCv2
ARC: [plat-eznps]: Restrict to CONFIG_ISA_ARCOMPACT
ARC: entry: comment
arc: remove #ifndef CONFIG_AS_CFI_SIGNAL_FRAME
arc: ptrace: hard-code "arc" instead of UTS_MACHINE
ARC: [plat-hsdk]: fix USB regression
ARC: Fix ICCM & DCCM runtime size checks
|
|
Signed-off-by: Vineet Gupta <[email protected]>
|
|
As of today we guard early DSP init code with
ARC_AUX_DSP_BUILD (0x7A) BCR check to verify that we have
CPU with DSP configured. However that's not enough as in
ARCv1 CPU the same BCR (0x7A) is used for checking MUL/MAC
instructions presence.
So, let's guard DSP early init against non ARCv2.
Fixes: 4827d0cf744e ("ARC: handle DSP presence in HW")
Reported-by: Angelo Ribeiro <[email protected]>
Suggested-by: Jose Abreu <[email protected]>
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
Elide invalid configuration EZNPS + ARCv2, triggered by a
make allyesconfig build.
Granted the root cause is in source code (asm/barrier.h) where we check
for ARCv2 before PLAT_EZNPS, but it is better to avoid such combinations
at onset rather then baking subtle nuances into code.
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
As the bug report [1] pointed out, <linux/vermagic.h> must be included
after <linux/module.h>.
I believe we should not impose any include order restriction. We often
sort include directives alphabetically, but it is just coding style
convention. Technically, we can include header files in any order by
making every header self-contained.
Currently, arch-specific MODULE_ARCH_VERMAGIC is defined in
<asm/module.h>, which is not included from <linux/vermagic.h>.
Hence, the straight-forward fix-up would be as follows:
|--- a/include/linux/vermagic.h
|+++ b/include/linux/vermagic.h
|@@ -1,5 +1,6 @@
| /* SPDX-License-Identifier: GPL-2.0 */
| #include <generated/utsrelease.h>
|+#include <linux/module.h>
|
| /* Simply sanity version stamp for modules. */
| #ifdef CONFIG_SMP
This works enough, but for further cleanups, I split MODULE_ARCH_VERMAGIC
definitions into <asm/vermagic.h>.
With this, <linux/module.h> and <linux/vermagic.h> will be orthogonal,
and the location of MODULE_ARCH_VERMAGIC definitions will be consistent.
For arc and ia64, MODULE_PROC_FAMILY is only used for defining
MODULE_ARCH_VERMAGIC. I squashed it.
For hexagon, nds32, and xtensa, I removed <asm/modules.h> entirely
because they contained nothing but MODULE_ARCH_VERMAGIC definition.
Kbuild will automatically generate <asm/modules.h> at build-time,
wrapping <asm-generic/module.h>.
[1] https://lore.kernel.org/lkml/[email protected]
Reported-by: Borislav Petkov <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Jessica Yu <[email protected]>
|
|
Signed-off-by: Vineet Gupta <[email protected]>
|
|
CONFIG_AS_CFI_SIGNAL_FRAME is never defined for ARC.
Suggested-by: Nick Desaulniers <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
ARC uses the UTS_MACHINE defined in the top Makefile as follows:
UTS_MACHINE := $(ARCH)
We know it is "arc" when we are building the kernel for ARC.
Hard-code user_regset_view::name, like many other architectures do.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
As of today the CONFIG_USB isn't explicitly present in HSDK defconfig
as it is implicitly forcibly enabled by UDL driver which selects CONFIG_USB
in its kconfig.
The commit 5d50bd440bc2 ("drm/udl: Make udl driver depend on CONFIG_USB")
reverse the dependencies between UDL and USB so UDL now depends on
CONFIG_USB and not selects it. This introduces regression for ARC HSDK
board as HSDK defconfig wasn't adjusted and now it misses USB support
due to lack of CONFIG_USB enabled.
Fix that.
Cc: <[email protected]> # 5.6.x
Fixes: 5d50bd440bc2 ("drm/udl: Make udl driver depend on CONFIG_USB")
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
As of today the ICCM and DCCM size checks are incorrectly using
mismatched units (KiB checked against bytes). The CONFIG_ARC_DCCM_SZ
and CONFIG_ARC_ICCM_SZ are in KiB, but the size calculated in
runtime and stored in cpu->dccm.sz and cpu->iccm.sz is in bytes.
Fix that.
Reported-by: Paul Greco <[email protected]>
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS
This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the
existing VM_STACK_DEFAULT_FLAGS. While here, also define some more
macros with standard VMA access flag combinations that are used
frequently across many platforms. Apart from simplification, this
reduces code duplication as well.
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Vineet Gupta <[email protected]>
Cc: Russell King <[email protected]>
Cc: Catalin Marinas <[email protected]>
Cc: Mark Salter <[email protected]>
Cc: Guo Ren <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Brian Cain <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Ralf Baechle <[email protected]>
Cc: Paul Burton <[email protected]>
Cc: Nick Hu <[email protected]>
Cc: Ley Foon Tan <[email protected]>
Cc: Jonas Bonn <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Paul Walmsley <[email protected]>
Cc: Heiko Carstens <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Guan Xuetao <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Jeff Dike <[email protected]>
Cc: Chris Zankel <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
- Support for DSP enabled userspace (save/restore regs)
- Misc other platform fixes
* tag 'arc-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: allow userspace DSP applications to use AGU extensions
ARC: add support for DSP-enabled userspace applications
ARC: handle DSP presence in HW
ARC: add helpers to sanitize config options
ARC: [plat-axs10x]: PGU: remove unused encoder-slave property
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are three SPDX patches for 5.7-rc1.
One fixes up the SPDX tag for a single driver, while the other two go
through the tree and add SPDX tags for all of the .gitignore files as
needed.
Nothing too complex, but you will get a merge conflict with your
current tree, that should be trivial to handle (one file modified by
two things, one file deleted.)
All three of these have been in linux-next for a while, with no
reported issues other than the merge conflict"
* tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
ASoC: MT6660: make spdxcheck.py happy
.gitignore: add SPDX License Identifier
.gitignore: remove too obvious comments
|
|
The idea comes from a discussion between Linus and Andrea [1].
Before this patch we only allow a page fault to retry once. We achieved
this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing
handle_mm_fault() the second time. This was majorly used to avoid
unexpected starvation of the system by looping over forever to handle the
page fault on a single page. However that should hardly happen, and after
all for each code path to return a VM_FAULT_RETRY we'll first wait for a
condition (during which time we should possibly yield the cpu) to happen
before VM_FAULT_RETRY is really returned.
This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY
flag when we receive VM_FAULT_RETRY. It means that the page fault handler
now can retry the page fault for multiple times if necessary without the
need to generate another page fault event. Meanwhile we still keep the
FAULT_FLAG_TRIED flag so page fault handler can still identify whether a
page fault is the first attempt or not.
Then we'll have these combinations of fault flags (only considering
ALLOW_RETRY flag and TRIED flag):
- ALLOW_RETRY and !TRIED: this means the page fault allows to
retry, and this is the first try
- ALLOW_RETRY and TRIED: this means the page fault allows to
retry, and this is not the first try
- !ALLOW_RETRY and !TRIED: this means the page fault does not allow
to retry at all
- !ALLOW_RETRY and TRIED: this is forbidden and should never be used
In existing code we have multiple places that has taken special care of
the first condition above by checking against (fault_flags &
FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect
the first retry of a page fault by checking against both (fault_flags &
FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now
even the 2nd try will have the ALLOW_RETRY set, then use that helper in
all existing special paths. One example is in __lock_page_or_retry(), now
we'll drop the mmap_sem only in the first attempt of page fault and we'll
keep it in follow up retries, so old locking behavior will be retained.
This will be a nice enhancement for current code [2] at the same time a
supporting material for the future userfaultfd-writeprotect work, since in
that work there will always be an explicit userfault writeprotect retry
for protected pages, and if that cannot resolve the page fault (e.g., when
userfaultfd-writeprotect is used in conjunction with swapped pages) then
we'll possibly need a 3rd retry of the page fault. It might also benefit
other potential users who will have similar requirement like userfault
write-protection.
GUP code is not touched yet and will be covered in follow up patch.
Please read the thread below for more information.
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
Suggested-by: Linus Torvalds <[email protected]>
Suggested-by: Andrea Arcangeli <[email protected]>
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Brian Geffon <[email protected]>
Cc: Bobby Powers <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Denis Plotnikov <[email protected]>
Cc: "Dr . David Alan Gilbert" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Martin Cracauer <[email protected]>
Cc: Marty McFadden <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Maya Gokhale <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Although there're tons of arch-specific page fault handlers, most of them
are still sharing the same initial value of the page fault flags. Say,
merely all of the page fault handlers would allow the fault to be retried,
and they also allow the fault to respond to SIGKILL.
Let's define a default value for the fault flags to replace those initial
page fault flags that were copied over. With this, it'll be far easier to
introduce new fault flag that can be used by all the architectures instead
of touching all the archs.
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Brian Geffon <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Bobby Powers <[email protected]>
Cc: Denis Plotnikov <[email protected]>
Cc: "Dr . David Alan Gilbert" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Martin Cracauer <[email protected]>
Cc: Marty McFadden <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Maya Gokhale <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Let ARC to use the new helper fault_signal_pending() by moving the signal
check out of the retry logic as standalone. This should also helps to
simplify the code a bit.
Signed-off-by: Peter Xu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Tested-by: Brian Geffon <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Bobby Powers <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Denis Plotnikov <[email protected]>
Cc: "Dr . David Alan Gilbert" <[email protected]>
Cc: Hugh Dickins <[email protected]>
Cc: Jerome Glisse <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: "Kirill A . Shutemov" <[email protected]>
Cc: Martin Cracauer <[email protected]>
Cc: Marty McFadden <[email protected]>
Cc: Matthew Wilcox <[email protected]>
Cc: Maya Gokhale <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Mike Kravetz <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Change a header to mandatory-y if both of the following are met:
[1] At least one architecture (except um) specifies it as generic-y in
arch/*/include/asm/Kbuild
[2] Every architecture (except um) either has its own implementation
(arch/*/include/asm/*.h) or specifies it as generic-y in
arch/*/include/asm/Kbuild
This commit was generated by the following shell script.
----------------------------------->8-----------------------------------
arches=$(cd arch; ls -1 | sed -e '/Kconfig/d' -e '/um/d')
tmpfile=$(mktemp)
grep "^mandatory-y +=" include/asm-generic/Kbuild > $tmpfile
find arch -path 'arch/*/include/asm/Kbuild' |
xargs sed -n 's/^generic-y += \(.*\)/\1/p' | sort -u |
while read header
do
mandatory=yes
for arch in $arches
do
if ! grep -q "generic-y += $header" arch/$arch/include/asm/Kbuild &&
! [ -f arch/$arch/include/asm/$header ]; then
mandatory=no
break
fi
done
if [ "$mandatory" = yes ]; then
echo "mandatory-y += $header" >> $tmpfile
for arch in $arches
do
sed -i "/generic-y += $header/d" arch/$arch/include/asm/Kbuild
done
fi
done
sed -i '/^mandatory-y +=/d' include/asm-generic/Kbuild
LANG=C sort $tmpfile >> include/asm-generic/Kbuild
----------------------------------->8-----------------------------------
One obvious benefit is the diff stat:
25 files changed, 52 insertions(+), 557 deletions(-)
It is tedious to list generic-y for each arch that needs it.
So, mandatory-y works like a fallback default (by just wrapping
asm-generic one) when arch does not have a specific header
implementation.
See the following commits:
def3f7cefe4e81c296090e1722a76551142c227c
a1b39bae16a62ce4aae02d958224f19316d98b24
It is tedious to convert headers one by one, so I processed by a shell
script.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Michal Simek <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Continued user-access cleanups in the futex code.
- percpu-rwsem rewrite that uses its own waitqueue and atomic_t
instead of an embedded rwsem. This addresses a couple of
weaknesses, but the primary motivation was complications on the -rt
kernel.
- Introduce raw lock nesting detection on lockdep
(CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal
lock differences. This too originates from -rt.
- Reuse lockdep zapped chain_hlocks entries, to conserve RAM
footprint on distro-ish kernels running into the "BUG:
MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep
chain-entries pool.
- Misc cleanups, smaller fixes and enhancements - see the changelog
for details"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t
thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t
Documentation/locking/locktypes: Minor copy editor fixes
Documentation/locking/locktypes: Further clarifications and wordsmithing
m68knommu: Remove mm.h include from uaccess_no.h
x86: get rid of user_atomic_cmpxchg_inatomic()
generic arch_futex_atomic_op_inuser() doesn't need access_ok()
x86: don't reload after cmpxchg in unsafe_atomic_op2() loop
x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end()
objtool: whitelist __sanitizer_cov_trace_switch()
[parisc, s390, sparc64] no need for access_ok() in futex handling
sh: no need of access_ok() in arch_futex_atomic_op_inuser()
futex: arch_futex_atomic_op_inuser() calling conventions change
completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all()
lockdep: Add posixtimer context tracing bits
lockdep: Annotate irq_work
lockdep: Add hrtimer context tracing bits
lockdep: Introduce wait-type checks
completion: Use simple wait queues
sched/swait: Prepare usage in completions
...
|
|
Move access_ok() in and pagefault_enable()/pagefault_disable() out.
Mechanical conversion only - some instances don't really need
a separate access_ok() at all (e.g. the ones only using
get_user()/put_user(), or architectures where access_ok()
is always true); we'll deal with that in followups.
Signed-off-by: Al Viro <[email protected]>
|
|
Add SPDX License Identifier to all .gitignore files.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
To be able to run DSP-enabled userspace applications with AGU
(address generation unit) extensions we additionally need to
save and restore following registers at context switch:
* AGU_AP*
* AGU_OS*
* AGU_MOD*
Reviewed-by: Vineet Gupta <[email protected]>
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
To be able to run DSP-enabled userspace applications we need to
save and restore following DSP-related registers:
At IRQ/exception entry/exit:
* DSP_CTRL (save it and reset to value suitable for kernel)
* ACC0_LO, ACC0_HI (we already save them as r58, r59 pair)
At context switch:
* ACC0_GLO, ACC0_GHI
* DSP_BFLY0, DSP_FFT_CTRL
Reviewed-by: Vineet Gupta <[email protected]>
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
When DSP extensions are present, some of the regular integer instructions
such as DIV, MACD etc are executed in the DSP unit with semantics alterable
by flags in DSP_CTRL aux register. This register is writable by userspace
and thus can potentially affect corresponding instructions in kernel code,
intentionally or otherwise. So safegaurd kernel by effectively disabling
DSP_CTRL upon bootup and every entry to kernel.
Do note that for this config we simply zero out the DSP_CTRL reg assuming
userspace doesn't really care about DSP. The next patch caters to the DSP
aware userspace where this reg is saved/restored upon kernel entry/exit.
Reviewed-by: Vineet Gupta <[email protected]>
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
We'll use this macro in coming patches extensively.
Reviewed-by: Vineet Gupta <[email protected]>
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
ARC PGU is looking for encoder via endpoint mechanism and doesn't
use "encoder-slave" property for a long time. Let's drop unused
"encoder-slave" property from ARC PGU node in axs10x.
Acked-by: Alexey Brodkin <[email protected]>
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
The default defintions use fill pattern 0x90 for padding which for ARC
generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090
So use ".align 4" which insert a "nop_s" instruction instead.
Cc: [email protected]
Acked-by: Vineet Gupta <[email protected]>
Signed-off-by: Eugeniy Paltsev <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
Before
------
| CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12
|
| [ECR ]: 0x00090000 =>
| [EFA ]: 0x00000000
| [ERET ]: 0x2004aa6c
| @off 0x2aa6c in [/lib/libc-2.31.9000.so]
VMA: 0x20020000 to 0x20122000
| [STAT32]: 0x80080a82 [IE U ]
| BTA: 0x2004aa18 SP: 0x5ffff8a8 FP: 0x5ffff8fc
| LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000
| r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000
| r03: 0x00000008 r04: 0xffffffff r05: 0x00000000
| r06: 0x00000000 r07: 0x00000000 r08: 0x00000087
| r09: 0x00000000 r10: 0x2010691c r11: 0x00000020
| r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68
| r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001
| r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948
| r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c
| r24: 0x4008c2a8 r25: 0x2001f6e0
After
-----
| CPU: 1 PID: 29061 Comm: tst-dynarray-at Not tainted 5.6.0-rc1-00002-g941fcc018ca6-dirty #12
| @off 0x2aa6c in [/lib/libc-2.31.9000.so] VMA: 0x20020000 to 0x20122000
| ECR: 0x00090000 EFA: 0x00000000 ERET: 0x2004aa6c
| STAT32: 0x80080a82 [IE U ] BTA: 0x2004aa18
| BLK: 0x2003b214 SP: 0x5ffff8a8 FP: 0x5ffff8fc
| LPS: 0x2008788e LPE: 0x20087896 LPC: 0x00000000
| r00: 0x00000000 r01: 0x5ffff8a8 r02: 0x00000000
| r03: 0x00000008 r04: 0xffffffff r05: 0x00000000
| r06: 0x00000000 r07: 0x00000000 r08: 0x00000087
| r09: 0x00000000 r10: 0x2010691c r11: 0x00000020
| r12: 0x2003b214 r13: 0x5ffff8a8 r14: 0x20126e68
| r15: 0x2001f26c r16: 0x2012a000 r17: 0x00000001
| r18: 0x5ffff8fc r19: 0x00000000 r20: 0x5ffff948
| r21: 0x00000001 r22: 0xffffffff r23: 0x5fffff8c
| r24: 0x4008c2a8 r25: 0x2001f6e0 BTA: 0x2004aa18
Signed-off-by: Vineet Gupta <[email protected]>
|
|
The ARC platform code is not a clock provider, and just needs to call
of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
Reported-by: kbuild test robot <[email protected]>
Link: http://lists.infradead.org/pipermail/linux-snps-arc/2020-February/006845.html
Signed-off-by: Vineet Gupta <[email protected]>
|
|
Fix language typos in arch/arc/Kconfig.
Cc: [email protected]
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|