| Age | Commit message (Collapse) | Author | Files | Lines |
|
The documentation of the Memory Consistency Flags was part of the struct
v4l2_buffer documentation, but that struct doesn't use those flags. Instead
it is used by VIDIOC_CREATE_BUFS and VIDIOC_REQBUFS. Move the documentation
from buffer.rst to vidioc-reqbufs.rst which is where it belongs.
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The documentation for V4L2_BUF_CAP_SUPPORTS_MAX_NUM_BUFFERS and
V4L2_BUF_CAP_SUPPORTS_REMOVE_BUFS was missing. Add this.
Signed-off-by: Hans Verkuil <[email protected]>
Reviewed-by: Sebastian Fricke <[email protected]>
Reviewed-by: Benjamin Gaignard <[email protected]>
|
|
The vivid driver supports media controller support for quite a long
time now, so drop that from the list.
Since commit 4c4dacb052d4 ("media: vivid: loopback based on
'Connected To' controls") making EDID changes causes correct signaling
to happen, but what is still missing is the 100 ms delay required before
signaling that there is an HPD. Modify this TODO item accordingly.
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The GXLX SoC is a GXL variant that omits VP9 codec support. Also add S905W
and S905Y as GXL chips and sort the GXL comment.
Signed-off-by: Christian Hewitt <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Fix incorrect formatting.
Signed-off-by: Fritz Koenig <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
[hverkuil: added missing commit message]
|
|
"Blanking" should be spelled as such, not "balanking". Fix it.
Reported-by: Hans Verkuil <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A fix for drm/client to prevent a null pointer dereference, a fix for a
double-free in drm/bridge-connector, a fix for a gem shmem test, and a
fix for async flips updates.
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808-debonair-smoky-mustang-8b6b3f@houat
|
|
Cross-merge networking fixes after downstream PR.
No conflicts or adjacent changes.
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The reset GPIO of WCD9390/WCD9395 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity, instead of IRQ flag (which is a logical mistake on its own).
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The reset GPIO of WCD9380/WCD9385 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The reset GPIO of WCD9340/WCD9341 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The reset GPIO of WCD9370/WCD9375 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The yaml had indentation errors:
./Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml:21:9:
[warning] wrong indentation: expected 10 but found 8 (indentation)
./Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml:23:11:
[warning] wrong indentation: expected 12 but found 10 (indentation)
Fix them.
Reported-by: Rob Herring <[email protected]>
Closes: https://lore.kernel.org/r/CAL_JsqLRTgQRPcfXy4G9hLoHMd-Uax4_C90BV_OZn4mK+-82kw@mail.gmail.com
Fixes: 1c4a057d01f4 ("dt-bindings: display: panel: samsung,atna45dc02: Document ATNA45DC02")
Reviewed-by: Rob Clark <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240808114407.1.I099e8e9e36407a0785d846b953031d40ea71e559@changeid
|
|
For some reason my finger always hits the 'r' after typing "reserve".
Fix the typo in the Documentation example.
Fixes: d9d814eebb1ae ("pstore/ramoops: Add ramoops.mem_name= command line option")
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Acked-by: Mike Rapoport (Microsoft) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
virtio:
- Define DRM capset
Cross-subsystem Changes:
dma-buf:
- heaps: Clean up documentation
printk:
- Pass description to kmsg_dump()
Core Changes:
CI:
- Update IGT tests
- Point upstream repo to GitLab instance
modesetting:
- Introduce Power Saving Policy property for connectors
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
panic:
- Avoid build-time interference with framebuffer console
docs:
- Document Colorspace property
scheduler:
- Remove full_recover from drm_sched_start
TTM:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
Driver Changes:
amdgpu:
- Support Power Saving Policy connector property
ast:
- astdp: Support AST2600 with VGA; Clean up HPD
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
gma500:
- Update i2c terminology
ivpu:
- Add MODULE_FIRMWARE()
lcdif:
- Fix pixel clock
loongson:
- Use GEM refcount over TTM's
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
panel:
- Shutdown fixes plus documentation
- Refactor several drivers for better code sharing
- boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus
DT; Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1,
BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor
for code sharing
sti:
- Fix module owner
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc: Fix transparency after disabling plane; Remove unused interrupt
tegra:
- Call drm_atomic_helper_shutdown()
v3d:
- Clean up perfmon
vkms:
- Clean up
Signed-off-by: Daniel Vetter <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Setting encryption as required in security flags was broken.
For example (to require all mounts to be encrypted by setting):
"echo 0x400c5 > /proc/fs/cifs/SecurityFlags"
Would return "Invalid argument" and log "Unsupported security flags"
This patch fixes that (e.g. allowing overriding the default for
SecurityFlags 0x00c5, including 0x40000 to require seal, ie
SMB3.1.1 encryption) so now that works and forces encryption
on subsequent mounts.
Acked-by: Bharath SM <[email protected]>
Cc: [email protected]
Signed-off-by: Steve French <[email protected]>
|
|
Commit 2b3d04787012 ("unicode: Add utf8-data module") changed the
database file from 'utf8data.h' to 'utf8data.c' to build separate
module, but it seems forgot to update Documentation/dontdiff. Remove
'utf8data.h' and add 'utf8data.c'.
Signed-off-by: ganjie <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The "fsl,weim-cs-timing" property is an array, but the constraints in
the if/then schema are for a matrix. That worked fine when all
properties were decoded into a matrix, but now dtschema decodes
properties into scalars and arrays based on their type.
Signed-off-by: Rob Herring (Arm) <[email protected]>
Acked-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
The legacy snd_print*() helpers will be dropped now. Clean up the
corresponding documentation, too.
Reviewed-by: Jaroslav Kysela <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
Add netkit support to rt_link.yaml. Only forward(PASS) and
blackhole(DROP) policies are allowed to be set by user-space so I've
added only them to the yaml to avoid confusion.
Example:
$ ./tools/net/ynl/cli.py \
--spec Documentation/netlink/specs/rt_link.yaml \
--do getlink --json '{"ifname": "netkit0"}' --output-json | jq
...
"linkinfo": {
"kind": "netkit",
"data": {
"primary": 1,
"policy": "blackhole",
"mode": "l2",
"peer-policy": "forward"
}
},
...
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Convert the MediaTek MT6397 regulator bindings to DT schema.
Signed-off-by: Sen Chu <[email protected]>
Signed-off-by: Macpaul Lin <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add some documentation regarding the newly introduced scheduler EEVDF.
Signed-off-by: Carlos Bilbao <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add the required indentation to fix this docs build error:
Documentation/admin-guide/device-mapper/dm-crypt.rst:167: ERROR: Unexpected indentation.
Also split the documentation for read and write into separate blocks.
Signed-off-by: Shibu kumar [email protected]
[jc: rewrote changelog]
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Added a space to align comment formatting; this helps improve
consistency and visual uniformity.
Signed-off-by: Jiamu Sun <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/SY0P300MB0801D1A4B278157CA7C92DE2CEBC2@SY0P300MB0801.AUSP300.PROD.OUTLOOK.COM
|
|
The failslab fault injection mechanism has an undocumented capability
that provides significant utility in testing and debugging. This feature,
introduced in commit 4c13dd3b48fcb ("failslab: add ability to filter slab
caches"), allows for targeted error injection into specific slab caches.
However, it was inadvertently left undocumented at the time of its
implementation.
Add documentation for the cache-filter feature in the failslab mode
description. Also, providing a practical example demonstrating how to
use cache-filter to inject failures specifically when allocating socket
buffers (skbs).
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Akinobu Mita <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Add bindings for SAM9X7's pmc.
Signed-off-by: Varshini Rajendran <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Claudiu Beznea <[email protected]>
|
|
Add bindings for SAM9X7's slow clock controller.
Signed-off-by: Varshini Rajendran <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Claudiu Beznea <[email protected]>
|
|
The workqueue.panic_on_stall kernel parameter was added in commit
073107b39e55 ("workqueue: add cmdline parameter workqueue.panic_on_stall")
but not listed in the kernel-parameters doc. Add it there.
Signed-off-by: Sangmoon Kim <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Add RAM controller & PIT64 DT bindings.
Signed-off-by: Varshini Rajendran <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Claudiu Beznea <[email protected]>
|
|
Use double backticks instead of quotes for sysfs attribute value.
This makes sphinx generate the "mcu" and "cpu" values in monospace when
rendering to HTML.
Fixes: dfa556e45ae9 ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
Tested-by: Stephen Rothwell <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Fix sphinx-build warnings
ERROR: Unexpected indentation.
WARNING: Block quote ends without a blank line; unexpected unindent
in Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu.
Reported-by: Stephen Rothwell <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Fixes: dfa556e45ae9 ("platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs")
Tested-by: Stephen Rothwell <[email protected]>
Signed-off-by: Marek Behún <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Convert all callers from working on a page to working on one page
of a folio (support for working on an entire folio can come later).
Removes a lot of folio->page->folio conversions.
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Most callers have a folio, and most implementations operate on a folio,
so remove the conversion from folio->page->folio to fit through this
interface.
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
Add compatible string, fsl,ls1088a-isc, fsl,ls2080a-isc, fsl,lx2160a-isc.
Fix the below warning:
arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dtb: /soc/syscon@1f70000: failed to match any schema with compatible: ['fsl,ls2080a-isc', 'syscon']
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert dt-binding rcpm from txt to yaml format.
Add fsl,ls1028a-rcpm compatible string.
Additional changes:
- Add missed compatible string fsl,<chip>-rcpm.
- Remove map fsl,<chip>-rcpm to fsl,qoriq-rcpm-<version>.
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The Samsung ATNA45DC02 panel is an AMOLED eDP panel, similar to the
existing ATNA45AF01 and ATNA33XC20 panel but with a higher resolution.
Signed-off-by: Rob Clark <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes:
- Fix ACPI notifier racing with itself (intel-vbtn)
- Initialize local variable to cover a timeout corner case
(intel/ifs)
- WMI docs spelling
New device IDs:
- amd/{pmc,pmf}: AMD 1Ah model 60h series.
- amd/pmf: SPS quirk support for ASUS ROG Ally X"
* tag 'platform-drivers-x86-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Initialize union ifs_status to zero
platform/x86: msi-wmi-platform: Fix spelling mistakes
platform/x86/amd/pmf: Add new ACPI ID AMDI0107
platform/x86/amd/pmc: Send OS_HINT command for new AMD platform
platform/x86/amd: pmf: Add quirk for ROG Ally X
platform/x86: intel-vbtn: Protect ACPI notify handler against recursion
|
|
- s/alloc_ordered_queue()/alloc_ordered_workqueue()/
- remove markers to convert it into a link.
Signed-off-by: Nikita Shubin <[email protected]>
Signed-off-by: Tejun Heo <[email protected]>
|
|
Currently, we are using a mix of traditional UFS and zone UFS to support
some functionalities that cannot be achieved on zone UFS alone. However,
there are some issues with this approach. There exists a significant
performance difference between traditional UFS and zone UFS. Under normal
usage, we prioritize writes to zone UFS. However, in critical conditions
(such as when the entire UFS is almost full), we cannot determine whether
data will be written to traditional UFS or zone UFS. This can lead to
significant performance fluctuations, which is not conducive to
development and testing. To address this, we have added an option
zlu_io_enable under sys with the following three modes:
1) zlu_io_enable == 0:Normal mode, prioritize writing to zone UFS;
2) zlu_io_enable == 1:Zone UFS only mode, only allow writing to zone UFS;
3) zlu_io_enable == 2:Traditional UFS priority mode, prioritize writing to
traditional UFS.
Signed-off-by: Liao Yuanhong <[email protected]>
Signed-off-by: Wu Bo <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
|
|
Fixes the register ID of SPSR_FIQ.
SPSR_FIQ is a 64-bit register and the 64-bit register size mask is
0x0030000000000000ULL.
Fixes: fd3bc912d3d1 ("KVM: Documentation: Document arm64 core registers in detail")
Signed-off-by: Takahiro Itazuri <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
The IP of QDMA ls1028/ls1043/ls1046/ is same as ls1021. So allow compatible
string fallback to fsl,ls1021a-qdma.
The difference is that ls1021a-qdma have 3 irqs, and other have 5 irqs.
Fix below CHECK_DTB warning.
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: dma-controller@8380000: compatible: ['fsl,ls1046a-qdma', 'fsl,ls1021a-qdma'] is too long
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Convert txt bindings of Marvell XOR v2 engines to dtschema to allow
for validation.
Also add missing property `dma-coherent` as `drivers/dma/mv_xor_v2.c`
calls various dma-coherent memory functions.
Signed-off-by: Shresth Prasad <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
Document the Renesas RZ/G3S DMAC block. This is identical to the one found
on the RZ/G2L SoC.
Signed-off-by: Claudiu Beznea <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
The HDMI PHY can be used as a clock provider on RK3588 SoC, hence add
the necessary '#clock-cells' property.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Cristian Ciocaltea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
When proposing that PCI grow some new cleanup helpers for pci_dev_put()
and pci_dev_{lock,unlock} [1], Bjorn had some fundamental questions
about expectations and best practices. Upon reviewing an updated
changelog with those details he recommended adding them to documentation
in the header file itself.
Add that documentation and link it into the rendering for
Documentation/core-api/.
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Kevin Tian <[email protected]>
Link: https://lore.kernel.org/r/171175585714.2192972.12661675876300167762.stgit@dwillia2-xfh.jf.intel.com
|
|
The flexcan in iMX95 is not compatible with imx93 because wakeup method is
difference. Make fsl,imx95-flexcan not fallback to fsl,imx93-flexcan.
Reviewed-by: Han Xu <[email protected]>
Signed-off-by: Haibo Chen <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Add common 'can-transceiver' children node for fsl,flexcan.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: can@2180000: 'can-transceiver' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/net/can/fsl,flexcan.yaml#
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
If this flag is set, then the reply is expected to consist of
the CEC_MSG_VENDOR_COMMAND_WITH_ID opcode followed by the Vendor ID (as
used in bytes 1-4 of the message), followed by the struct cec_msg reply
field.
Note that this assumes that the byte after the Vendor ID is a
vendor-specific opcode.
This flag makes it easier to wait for replies to vendor commands,
using the same CEC framework support for waiting for regular replies.
Support for this flag is indicated by setting the new
CEC_CAP_REPLY_VENDOR_ID capability.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Remove non-existent smb4den and lpcclk groups and functions from Nuvoton
NPCM8XX Pin controller binding documentation.
Signed-off-by: Tomer Maimon <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
Convert the Qualcomm APQ8084 TLMM block bindings from text to yaml dt
schema format.
Signed-off-by: Rayyan Ansari <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|