| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove the duplicate compatible entry `renesas,sdhi-r9a09g057` and add a
restriction for clocks and clock-names for the RZ/V2H(P) SoC, which has
four clocks similar to the RZ/G2L SoC.
Reported-by: Geert Uytterhoeven <[email protected]>
Fixes: 32842af74abc ("dt-bindings: mmc: renesas,sdhi: Document RZ/V2H(P) support")
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
SG2042 use Synopsys dwcnshc IP for SD/eMMC controllers.
SG2042 defines 3 clocks for SD/eMMC controllers.
- EMMC_100M/SD_100M for cclk(Card clocks in DWC_mshc), so reuse
existing "core".
- AXI_EMMC/AXI_SD for aclk/hclk(Bus interface clocks in DWC_mshc)
and blck(Core Base Clock in DWC_mshc), these 3 clocks share one
source, so reuse existing "bus".
- 100K_EMMC/100K_SD for cqetmclk(Timer clocks in DWC_mshc), so reuse
existing "timer" which was added for rockchip specified.
Signed-off-by: Chen Wang <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/9ca450097e5389a38bcd7d8ddf863766df4cea10.1722847198.git.unicorn_wang@outlook.com
Signed-off-by: Ulf Hansson <[email protected]>
|
|
The SD/MMC block on the RZ/V2H(P) ("R9A09G057") SoC is similar to that
of the R-Car Gen3, but it has some differences:
- HS400 is not supported.
- It has additional SD_STATUS register to control voltage,
power enable and reset.
- It supports fixed address mode.
To accommodate these differences, a SoC-specific 'renesas,sdhi-r9a09g057'
compatible string is added.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Add binding for Nuvoton MA35D1 SDHCI controller.
Signed-off-by: Shan-Chun Hung <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Document DU found in RZ/G2UL SoC. The DU block is identical to RZ/G2L
SoC, but has only DPI interface.
While at it, add missing required property port@1 for RZ/G2L and RZ/V2L
SoCs. Currently there is no user for the DPI interface and hence there
won't be any ABI breakage for adding port@1 as required property for
RZ/G2L and RZ/V2L SoCs.
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Immutable branch for the SoC tree, merge to pinctrl devel
proper.
Signed-off-by: Linus Walleij <[email protected]>
|
|
Add pinctrl support for Sophgo CV1800 series SoC.
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/IA1PR20MB4953680DE7977CAD906DBDB4BBB32@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Linus Walleij <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.12
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <[email protected]>
|
|
This series introduce new ICC drivers for some legacy socs
while at it also updates a bit of qcs404 driver which seems
to not receive much attention lately.
* icc-misc
dt-bindings: interconnect: qcom: Add Qualcomm MSM8976 NoC
interconnect: qcom: Add MSM8976 interconnect provider driver
dt-bindings: interconnect: qcom: Add Qualcomm MSM8937 NoC
interconnect: qcom: Add MSM8937 interconnect provider driver
interconnect: qcom: qcs404: Mark AP-owned nodes as such
interconnect: qcom: qcs404: Add regmaps and more bus descriptions
dt-bindings: interconnect: qcom: msm8939: Fix example
interconnect: qcom: msm8953: Add ab_coeff
dt-bindings: interconnect: qcom: msm8953: Fix 'See also' in description
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The virtual interconnect providers do not have their own IO address space,
but this is not documented in the DT schema and the following warnings are
reported by dtbs_check:
sc8180x-lenovo-flex-5g.dtb: interconnect-camnoc-virt: 'reg' is a required property
sc8180x-lenovo-flex-5g.dtb: interconnect-mc-virt: 'reg' is a required property
sc8180x-lenovo-flex-5g.dtb: interconnect-qup-virt: 'reg' is a required property
sc8180x-primus.dtb: interconnect-camnoc-virt: 'reg' is a required property
sc8180x-primus.dtb: interconnect-mc-virt: 'reg' is a required property
sc8180x-primus.dtb: interconnect-qup-virt: 'reg' is a required property
Fix this by adding them to the list of compatibles that do not require
the reg property.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Document the compatibles used to describe the bwmons present on the
SA8775p platform.
Signed-off-by: Tengfei Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Clean the "Rust" main page by introducing a 'Code documentation" section
to separate it from the rest of the text above.
In addition, introduce the "Rust code documentation" term, which may be
clearer than referring to a potentially unknown tool.
Furthermore, for the HTML case, homogenize both `rustdoc` and
non-`rustdoc` cases and use the term introduced above instead.
Then, always generate the pregenerated version part, since now there
is a section that is always generated and thus makes sense to do so.
Finally, finish the new section with a link to more details about the
Rust code documentation.
The intention is that:
- The non-HTML case mentions the code documentation too, making it
more prominent for readers of non-HTML docs.
- Both HTML cases read more naturally.
- The pregenerated version is always mentioned, since it is likely
useful for readers of non-HTML docs.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
The Rust code documentation (i.e. `rustdoc`-generated docs) is now
available at:
https://rust.docs.kernel.org
Thus document it and remove the `TODO` line.
The generation uses a particular kernel configuration, based on x86_64,
which may get tweaked over time. Older tags, and how they are generated,
may also change in the future. We may consider freezing them at some
point, but for the moment, the content should not be considered immutable.
Thanks Konstantin for the support setting it up!
Cc: Konstantin Ryabitsev <[email protected]>
Acked-by: Konstantin Ryabitsev <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Some SC7280-based boards crash when providing the "secure_non_pixel"
context bank, so allow only one iommu in the bindings also.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The graph walk API has been deprecated in commit eac564de0915 ("media:
mc: entity: Add entity iterator for media_pipeline") in favour of
pipelien iterators, but the MC documentation hasn't been updated
accordingly. It still documents the deprecated API as the only option.
Fix it by dropping the deprecated function, and documenting the new API.
Signed-off-by: Laurent Pinchart <[email protected]>
Acked-by: Sakari Ailus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Laurent Pinchart <[email protected]>
|
|
This node contains a child which is only probed if simple-mfd is in the
compatible list. Add this here.
Signed-off-by: Andrew Davis <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Debian Testing is now also providing recent Rust releases (outside of
the freeze period), like Debian Unstable (Sid).
Thus add it to the list.
Cc: Fabian Grünbichler <[email protected]>
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Convert Atmel PIO3 pinctrl binding document to DT schema format
json-schema.
Signed-off-by: Manikandan Muralidharan <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Claudiu Beznea <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
"Nothing too interesting. One patch to remove spurious warning and
others to address static checker warnings"
* tag 'wq-for-6.11-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Correct declaration of cpu_pwq in struct workqueue_struct
workqueue: Fix spruious data race in __flush_work()
workqueue: Remove incorrect "WARN_ON_ONCE(!list_empty(&worker->entry));" from dying worker
workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask()
workqueue: doc: Fix function name, remove markers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes
* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: himax_hx83112b - fix incorrect size when reading product ID
Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
Input: uinput - reject requests with unreasonable number of slots
Input: edt-ft5x06 - add support for FocalTech FT8201
dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
Input: adc-joystick - fix optional value handling
Input: synaptics - enable SMBus for HP Elitebook 840 G2
Input: ads7846 - ratelimit the spi_sync error message
|
|
"See also" in description seems to be wrongly defined,
make it inline with other yamls.
Fixes: 791ed23f735b ("dt-bindings: interconnect: qcom: Add Qualcomm MSM8953 NoC")
Signed-off-by: Adam Skladowski <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
For now example list snoc_mm as children of bimc which is obviously
not valid, drop bimc and move snoc_mm into snoc.
Signed-off-by: Adam Skladowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add bindings for Qualcomm MSM8937 Network-On-Chip interconnect devices.
Signed-off-by: Adam Skladowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add bindings for Qualcomm MSM8976 Network-On-Chip interconnect devices.
Signed-off-by: Adam Skladowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add the compatible string for the rk3576 SoC.
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
The sm8150 camnoc interconnect was mistakenly documented as
"qcom,sm8150-camnoc-noc", for which there is no reference to in
drivers or device tree.
Correct this to "qcom,sm8150-camnoc-virt".
Signed-off-by: Rayyan Ansari <[email protected]>
Acked-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Update document to reflect the driver change to use sbdf instead
of bdf alone.
Signed-off-by: Krishna chaitanya chundru <[email protected]>
Reviewed-by: Yicong Yang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Document support for the VIN module in the Renesas V4M (r8a779h0) SoC.
This device is compatible with the VIN module on the other Gen4 SoCs.
Signed-off-by: Niklas Söderlund <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Laurent Pinchart <[email protected]>
|
|
The Gen4 SoCs V3U, V4H and V4M have a similar video capture pipelines.
The datasheets for the SoCs have small nuances around the Pre-Clip
registers ELPrC and EPPrC in three use-cases, interlaced images,
embedded data and RAW8 input. On V4H the values written to the registers
are based on odd numbers while on V4M they are even numbers, values are
based on the input image size. No board that uses these SoCs which also
have the external peripherals to test these nuances exists. Most likely
this is an issue in the datasheet.
Before adding bindings for V4M add a family compatible fallback for
Gen4. That way the driver only needs to be updated once for Gen4, and we
still have the option to fix any problems in the driver if any testable
differences between the SoCs are found.
There are already DTS files using the V3U and V4H compatibles which need
to be updated to not produce a warning for DTS checks. The driver also
needs to keep the compatible values to be backward compatible , but for
new Gen4 SoCs such as V4M we can avoid this.
Signed-off-by: Niklas Söderlund <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Laurent Pinchart <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-output-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
There are no more callers of thermal_zone_bind_cooling_device() and
thermal_zone_unbind_cooling_device(), so drop them along with all of
the corresponding headers, code and documentation.
Moreover, because the .bind() and .unbind() thermal zone callbacks would
only be used when the above functions, respectively, were called, drop
them as well along with all of the code related to them.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Acked-by: Huisong Li <[email protected]>
Reviewed-by: Daniel Lezcano <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
The newly introduced phy_link_topology tracks all ethernet PHYs that are
attached to a netdevice. Document the base principle, internal and
external APIs. As the phy_link_topology is expected to be extended, this
documentation will hold any further improvements and additions made
relative to topology handling.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Tested-by: Christophe Leroy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The PHY_GET command, supporting both DUMP and GET operations, is used to
retrieve the list of PHYs connected to a netdevice, and get topology
information to know where exactly it sits on the physical link.
Add the netlink specs corresponding to that command.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Tested-by: Christophe Leroy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As we have the ability to track the PHYs connected to a net_device
through the link_topology, we can expose this list to userspace. This
allows userspace to use these identifiers for phy-specific commands and
take the decision of which PHY to target by knowing the link topology.
Add PHY_GET and PHY_DUMP, which can be a filtered DUMP operation to list
devices on only one interface.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Tested-by: Christophe Leroy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Update the spec to take the newly introduced phy-index as a generic
request parameter.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Tested-by: Christophe Leroy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some netlink commands are target towards ethernet PHYs, to control some
of their features. As there's several such commands, add the ability to
pass a PHY index in the ethnl request, which will populate the generic
ethnl_req_info with the passed phy_index.
Add a helper that netlink command handlers need to use to grab the
targeted PHY from the req_info. This helper needs to hold rtnl_lock()
while interacting with the PHY, as it may be removed at any point.
Signed-off-by: Maxime Chevallier <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Tested-by: Christophe Leroy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add all syscon compatibles for RK3576.
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Document dt-bindings for RK3308 IO voltage domains.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
As we discussed in the room at netdevconf earlier this week,
drop the requirement for special comment style for netdev.
For checkpatch, the general check accepts both right now, so
simply drop the special request there as well.
Acked-by: Stephen Hemminger <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add dt-schema for ExynosAuto v920 SoC clock controller.
Add device tree clock binding definitions for below CMU blocks.
- CMU_TOP
- CMU_PERIC0/1
- CMU_MISC
- CMU_HSI0/1
Signed-off-by: Sunyeal Hong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973df5 ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb754 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Eliminate the fdtoverlay command duplication in scripts/Makefile.lib
- Fix 'make compile_commands.json' for external modules
- Ensure scripts/kconfig/merge_config.sh handles missing newlines
- Fix some build errors on macOS
* tag 'kbuild-fixes-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: fix typos "prequisites" to "prerequisites"
Documentation/llvm: turn make command for ccache into code block
kbuild: avoid scripts/kallsyms parsing /dev/null
treewide: remove unnecessary <linux/version.h> inclusion
scripts: kconfig: merge_config: config files: add a trailing newline
Makefile: add $(srctree) to dependency of compile_commands.json target
kbuild: clean up code duplication in cmd_fdtoverlay
|
|
Add phys properties so Linux can power-on/configure the GTR transceivers
(xlnx,zynqmp-psgtr-v1.1).
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Anderson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
|
|
Synthesize a consistency check VM-Exit (VM-Enter) or VM-Abort (VM-Exit) if
L1 attempts to load/store an MSR via the VMCS MSR lists that userspace has
disallowed access to via an MSR filter. Intel already disallows including
a handful of "special" MSRs in the VMCS lists, so denying access isn't
completely without precedent.
More importantly, the behavior is well-defined _and_ can be communicated
the end user, e.g. to the customer that owns a VM running as L1 on top of
KVM. On the other hand, ignoring userspace MSR filters is all but
guaranteed to result in unexpected behavior as the access will hit KVM's
internal state, which is likely not up-to-date.
Unlike KVM-internal accesses, instruction emulation, and dedicated VMCS
fields, the MSRs in the VMCS load/store lists are 100% guest controlled,
thus making it all but impossible to reason about the correctness of
ignoring the MSR filter. And if userspace *really* wants to deny access
to MSRs via the aforementioned scenarios, userspace can hide the
associated feature from the guest, e.g. by disabling the PMU to prevent
accessing PERF_GLOBAL_CTRL via its VMCS field. But for the MSR lists, KVM
is blindly processing MSRs; the MSR filters are the _only_ way for
userspace to deny access.
This partially reverts commit ac8d6cad3c7b ("KVM: x86: Only do MSR
filtering when access MSR by rdmsr/wrmsr").
Cc: Hou Wenlong <[email protected]>
Cc: Jim Mattson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Christopherson <[email protected]>
|
|
Document xe_ggtt and ensure it is part of the built kernel docs.
v2: - Accepted all Michal's suggestions
- Rebased on top of new set_pte per platform/wa function pointer
v3: - Typos and other acronym fixes (Michal)
Cc: Matthew Brost <[email protected]>
Cc: Michal Wajdeczko <[email protected]>
Reviewed-by: Himal Prasad Ghimiray <[email protected]> #v1
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Additional changes:
- Add ref to common.yaml for child node.
- Add I2C node at example.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: /soc@0/bus@30800000/i2c@30a40000/backlight@36:
failed to match any schema with compatible: ['ti,lm36922']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Describe what the subsystem does, how the consumers and providers work
and add API reference generated from kerneldocs.
Acked-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
An USB hub is not a HCD, but an USB device. Fix the referenced schema
accordingly.
Fixes: bfbf2e4b77e2 ("dt-bindings: usb: Document the Microchip USB2514 hub")
Cc: [email protected]
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add missed binding doc for layerscape dwc3 usb controller.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb: /soc/usb@3100000:
failed to match any schema with compatible: ['fsl,ls1028a-dwc3', 'snps,dwc3']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit a170a1e9ccc5 ("usb: phy: remove phy-msm-usb.c") removed the
device driver but left the corresponding documentation, delete it.
Signed-off-by: Masanori Ogino <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|