| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.12
1. Support alpha blending
2. Remove cl in struct cmdq_pkt
3. Fixup for ovl adaptor
4. Declare Z Position for all planes
5. Drop unnecessary check for property presence
6. Add dsi per-frame lp code for mt8188
7. Fix missing configuration flags in mtk_crtc_ddp_config()
8. Use spin_lock_irqsave() for CRTC event lock
9. Add power domain binding to the mediatek DPI controller
Signed-off-by: Dave Airlie <[email protected]>
From: Chun-Kuang Hu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Convert binding doc rotary-encoder.txt to yaml format.
Additional change:
- Only keep one example.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dtb: /rotary-encoder:
failed to match any schema with compatible: ['rotary-encoder']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Bring in changes removing support for platform data from matrix-keypad
driver.
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/[email protected]
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Fill another small gap in the nftables spec so that it is possible to
dump a tailscale ruleset with:
tools/net/ynl/cli.py --spec \
Documentation/netlink/specs/nftables.yaml --dump getrule
This adds support for the 'target' expression.
Signed-off-by: Donald Hunter <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In commit 6f8b12d661d0 ("net: napi: add hard irqs deferral feature")
napi_defer_irqs was added to net_device and napi_defer_irqs_count was
added to napi_struct, both as type int.
This value never goes below zero, so there is not reason for it to be a
signed int. Change the type for both from int to u32, and add an
overflow check to sysfs to limit the value to S32_MAX.
The limit of S32_MAX was chosen because the practical limit before this
patch was S32_MAX (anything larger was an overflow) and thus there are
no behavioral changes introduced. If the extra bit is needed in the
future, the limit can be raised.
Before this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
$ cat /sys/class/net/eth4/napi_defer_hard_irqs
-2147483647
After this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
bash: line 0: echo: write error: Numerical result out of range
Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned:
include/linux/netdevice.h: unsigned int tx_queue_len;
And has an overflow check:
dev_change_tx_queue_len(..., unsigned long new_len):
if (new_len != (unsigned int)new_len)
return -ERANGE;
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Joe Damato <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A zpos normalization fix for komeda, a register bitmask fix for nouveau,
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905-original-radical-guan-e7a2ae@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, bluetooth and wireless.
No known regressions at this point. Another calm week, but chances are
that has more to do with vacation season than the quality of our work.
Current release - new code bugs:
- smc: prevent NULL pointer dereference in txopt_get
- eth: ti: am65-cpsw: number of XDP-related fixes
Previous releases - regressions:
- Revert "Bluetooth: MGMT/SMP: Fix address type when using SMP over
BREDR/LE", it breaks existing user space
- Bluetooth: qca: if memdump doesn't work, re-enable IBS to avoid
later problems with suspend
- can: mcp251x: fix deadlock if an interrupt occurs during
mcp251x_open
- eth: r8152: fix the firmware communication error due to use of bulk
write
- ptp: ocp: fix serial port information export
- eth: igb: fix not clearing TimeSync interrupts for 82580
- Revert "wifi: ath11k: support hibernation", fix suspend on Lenovo
Previous releases - always broken:
- eth: intel: fix crashes and bugs when reconfiguration and resets
happening in parallel
- wifi: ath11k: fix NULL dereference in ath11k_mac_get_eirp_power()
Misc:
- docs: netdev: document guidance on cleanup.h"
* tag 'net-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
ila: call nf_unregister_net_hooks() sooner
tools/net/ynl: fix cli.py --subscribe feature
MAINTAINERS: fix ptp ocp driver maintainers address
selftests: net: enable bind tests
net: dsa: vsc73xx: fix possible subblocks range of CAPT block
sched: sch_cake: fix bulk flow accounting logic for host fairness
docs: netdev: document guidance on cleanup.h
net: xilinx: axienet: Fix race in axienet_stop
net: bridge: br_fdb_external_learn_add(): always set EXT_LEARN
r8152: fix the firmware doesn't work
fou: Fix null-ptr-deref in GRO.
bareudp: Fix device stats updates.
net: mana: Fix error handling in mana_create_txq/rxq's NAPI cleanup
bpf, net: Fix a potential race in do_sock_getsockopt()
net: dqs: Do not use extern for unused dql_group
sch/netem: fix use after free in netem_dequeue
usbnet: modern method to get random MAC
MAINTAINERS: wifi: cw1200: add net-cw1200.h
ice: do not bring the VSI up, if it was down before the XDP setup
ice: remove ICE_CFG_BUSY locking from AF_XDP code
...
|
|
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix builds for nightly compiler users now that 'new_uninit' was
split into new features by using an alternative approach for the
code that used what is now called the 'box_uninit_write' feature
- Allow the 'stable_features' lint to preempt upcoming warnings about
them, since soon there will be unstable features that will become
stable in nightly compilers
- Export bss symbols too
'kernel' crate:
- 'block' module: fix wrong usage of lockdep API
'macros' crate:
- Provide correct provenance when constructing 'THIS_MODULE'
Documentation:
- Remove unintended indentation (blockquotes) in generated output
- Fix a couple typos
MAINTAINERS:
- Remove Wedson as Rust maintainer
- Update Andreas' email"
* tag 'rust-fixes-6.11-2' of https://github.com/Rust-for-Linux/linux:
MAINTAINERS: update Andreas Hindborg's email address
MAINTAINERS: Remove Wedson as Rust maintainer
rust: macros: provide correct provenance when constructing THIS_MODULE
rust: allow `stable_features` lint
docs: rust: remove unintended blockquote in Quick Start
rust: alloc: eschew `Box<MaybeUninit<T>>::write`
rust: kernel: fix typos in code comments
docs: rust: remove unintended blockquote in Coding Guidelines
rust: block: fix wrong usage of lockdep API
rust: kbuild: fix export of bss symbols
|
|
Expand the conditional compilation section to explain how to support
other expressions, such as testing whether `RUSTC_VERSION` is at least
a given version, which requires a numerical comparison that Rust's `cfg`
predicates do not support (yet?).
Reviewed-by: Nicolas Schier <[email protected]>
Tested-by: Alice Ryhl <[email protected]>
Acked-by: Masahiro Yamada <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Update to commit 5928d411557e ("Documentation: Document the Linux Kernel
CVE process")
commit 0217f3944aeb ("Documentation: security-bugs.rst: linux-distros
relaxed their rules")
commit 3c1897ae4b6b ("Documentation: security-bugs.rst: clarify CVE
handling")
commit 4fee0915e649 ("Documentation: security-bugs.rst: update
preferences when dealing with the linux-distros group")
commit 44ac5abac86b ("Documentation/security-bugs: move from admin-guide/
to process/")
Signed-off-by: Dongliang Mu <[email protected]>
Reviewed-by: Alex Shi <[email protected]>
Reviewed-by: Yanteng Si <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This patch corrects several grammar and spelling errors in the
Documentation/block/bfq-iosched.rst file. These changes improve
the clarity and readability of the documentation.
Signed-off-by: Karol Przybylski <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Correct spelling mistakes in the documentation to improve readability.
Signed-off-by: Amit Vadhavana <[email protected]>
Reviewed-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Change 'indenpendently' to 'independently'.
Signed-off-by: Aryabhatta Dey <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/l5wzytcamcc43eadaquqbrfqilq6ajfnnseh37c77eceamtw35@hhtdipi4h22c
|
|
Add documentation topic for using pv_virt when running as a guest
on KVM hypervisor.
Signed-off-by: Bibo Mao <[email protected]>
Signed-off-by: Xianglai Li <[email protected]>
Co-developed-by: Mingcong Bai <[email protected]>
Signed-off-by: Mingcong Bai <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Dandan Zhang <[email protected]>
[jc: fixed htmldocs build error]
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/4769C036576F8816+20240828045950.3484113-1-zhangdandan@uniontech.com
|
|
Commit ed5cc702d311 ("block: Add config option to not allow writing to mounted
devices") added a Kconfig option along with a kernel command-line tuning to
control writes to mounted block devices, as a means to deal with fuzzers like
Syzkaller, that provokes kernel crashes by directly writing on block devices
bypassing the filesystem (so the FS has no awareness and cannot cope with that).
The patch just missed adding such kernel command-line option to the kernel
documentation, so let's fix that.
Cc: Bart Van Assche <[email protected]>
Cc: Darrick J. Wong <[email protected]>
Cc: Jens Axboe <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Signed-off-by: Guilherme G. Piccoli <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The member "wait" in struct completion isn't of type wait_queue_head_t
anymore, as it is now "struct swait_queue_head", fix it to match with
the current implementation.
Signed-off-by: I Hsin Cheng <[email protected]>
Reviewed-by: Kuan-Wei Chiu <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In zh_CN part of translations.pdf, there are several ASCII-art
diagrams whose vertical lines look sometimes jagged.
This is due to the interference between default settings of xeCJK
and fancyvrb (employed in sphinxVerbatim env), where extra space
is inserted between a latin char and a non-latin char when they
are next to each other (i.e., no explicit white space).
This issue can be suppressed by invoking \CJKsetecglue{} at the
beginning of every sphinxVerbatim enviornment.
\AtBeginEnvironment, provided by the etoolbox package, is useful in
this case.
Signed-off-by: Akira Yokosawa <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This is done primarily to get a docs build fix merged via another tree so
that "make htmldocs" stops failing.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner SoC device tree changes for 6.12
ARM64 device tree and binding-only changes
- Move PMIC on RG35XX boards from RSB (Allwinner proprietary bus) to I2C
- Introduce Anbernic RG35XX-SP board
- Enable charger on RG35XX boards
- Add thermal trip points for Allwinner A64 GPU
* tag 'sunxi-dt-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Add GPU thermal trips to the SoC dtsi
arm64: dts: allwinner: h700: Add charger for Anbernic RG35XX
arm64: dts: allwinner: h700: Add Anbernic RG35XX-SP
arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c
arm64: dts: allwinner: h616: Add r_i2c pinctrl nodes
dt-bindings: arm: sunxi: Add Anbernic RG35XXSP
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
* clk-imx: (22 commits)
clk: imx: composite-7ulp: Use NULL instead of 0
clk: imx: add missing MODULE_DESCRIPTION() macros
clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate
clk: imx: fracn-gppll: update rate table
clk: imx: imx8qxp: Parent should be initialized earlier than the clock
clk: imx: imx8qxp: Register dc0_bypass0_clk before disp clk
clk: imx: imx8qxp: Add clock muxes for MIPI and PHY ref clocks
clk: imx: imx8qxp: Add LVDS bypass clocks
clk: imx: imx8mm: Change the 'nand_usdhc_bus' clock to non-critical one
clk: imx: imx8mn: add sai7_ipg_clk clock settings
clk: imx: add CLK_SET_RATE_PARENT for lcdif_pixel_src for i.MX7D
clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D
clk: imx: imx8mp: fix clock tree update of TF-A managed clocks
clk: imx: fracn-gppll: fix fractional part of PLL getting lost
clk: imx: composite-7ulp: Check the PCC present bit
clk: imx: composite-93: keep root clock on when mcore enabled
clk: imx: composite-8m: Enable gate clk with mcore_booted
clk: imx: imx6ul: fix default parent for enet*_ref_sel
clk: imx: clk-audiomix: Correct parent clock for earc_phy and audpll
clk: imx: clk-audiomix: Add CLK_SET_RATE_PARENT flags for clocks
...
|
|
Add support for the Extron DA HD 4K Plus series of 4K HDMI
Distrubution Amplifiers (aka HDMI Splitters).
These devices support CEC and this driver adds support for the
CEC protocol for both the input and all outputs (2, 4 or 6 outputs,
depending on the model).
It also exports the EDID from the outputs and allows reading and
setting the EDID of the input.
Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
Add documentation for the new edid capability.
Signed-off-by: Erling Ljunggren <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
Reviewed-by: Sebastian Fricke <[email protected]>
Reviewed-by: Ricardo Ribalda <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
|
|
b4 is now widely used and is quite helpful for a lot of the things that
submitting-patches covers, let's advertise it to submitters to try to make
their lives easier and reduce the number of procedural issues maintainers
see.
Reviewed-by: Shuah Khan <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Acked-by: Konstantin Ryabitsev <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Another batch of compatibles unlikely to ever be documented. It's
mostly old PowerMAC and PPC stuff found in DT compatible API calls.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The flexspi on imx8ulp only has 16 number of LUTs, it is different
with flexspi on other imx SoC which has 32 number of LUTs.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: [email protected]
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Haibo Chen <[email protected]>
Reviewed-by: Frank Li <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Merge "hwmon fixes for v6.11-rc7" into review-hans to bring in
commit a54da9df75cd ("hwmon: (hp-wmi-sensors) Check if WMI event
data exists").
This is a dependency for a set of WMI event data refactoring changes.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/drivers
Amlogic drivers changes for v6.12:
- Support new Amlogic SoCs in meson-gx-ao-secure & meson-gx-socinfo
* tag 'amlogic-drivers-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
soc: amlogic: meson-gx-socinfo: add new SoCs id
dt-bindings: arm: amlogic: meson-gx-ao-secure: support more SoCs
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT changes for v6.12:
- New Boards:
- AW419 (Amlogic C3)
- Power Controller node for Amlogic A5 SoC
- Always-On Secure node for Amlogig A4/T7/C4 & S4 SoCs
- Amlogic A4 & C3 hardware support:
- PLL, SPICC, NOND, SDCard, Ethernet, Watchdog
- Final fixes for DTBs check:
- add clock and clock-names to sound cards
- drop saradc gxlx compatible
* tag 'amlogic-arm64-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: gxlx-s905l-p271: drop saradc gxlx compatible
arm64: dts: amlogic: add clock and clock-names to sound cards
arm64: dts: amlogic: c3: fix dtbcheck warning
arm64: dts: amlogic: add C3 AW419 board
arm64: dts: amlogic: add some device nodes for C3
dt-bindings: clock: fix C3 PLL input parameter
arm64: dts: amlogic: a4: add ao secure node
arm64: dts: amlogic: t7: add ao secure node
arm64: dts: amlogic: c3: add ao secure node
arm64: dts: amlogic: s4: add ao secure node
arm64: dts: amlogic: add watchdog node for A4 SoCs
arm64: dts: amlogic: enable some device nodes for S4
arm64: dts: amlogic: a5: add power domain controller node
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.12
Support is added for making SCM driver configure the system either for a
full or minimal ramdump following a system crash. The ramdump mode is
changed from being enable-only to enable/disable as requested.
The QSEECOM uefisecapp interface is allow-listed on Surface Laptop 7 and
Lenovo Thinkpad T14s, providing EFI variable access.
The change to match the SMD RPM driver based on the SMD channel name is
reverted, in favor of stepping back to OF-based matching, as a means to
get module autoloading to work properly.
AOSS, APR, ICE, OCMEM, PBS and SMP2P drivers has error handling cleaned
up using scoped resources.
Trace events are added to the BWMON and SMP2P drivers, for better
insights into their operations.
The X1E LLCC configuration data is updated based on recommended values.
A number of platforms are added to the in-kernel PD-mapper.
SocInfo driver is extended with IDs from SM7325, QCS8275 and QCS8300
families.
* tag 'qcom-drivers-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
dt-bindings: soc: qcom: qcom,pmic-glink: Document SM7325 compatible
soc: qcom: pd_mapper: Add SM7325 compatible
soc: qcom: socinfo: Add Soc IDs for SM7325 family
dt-bindings: arm: qcom,ids: Add IDs for SM7325 family
soc: qcom: socinfo: add QCS8275/QCS8300 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for QCS8275/QCS8300
soc: qcom: smp2p: use scoped device node handling to simplify error paths
soc: qcom: pbs: use scoped device node handling to simplify error paths
soc: qcom: ocmem: use scoped device node handling to simplify error paths
soc: qcom: ice: use scoped device node handling to simplify error paths
soc: qcom: aoss: simplify with scoped for each OF child loop
soc: qcom: apr: simplify with scoped for each OF child loop
soc: qcom: smd-rpm: add qcom,smd-rpm compatible
dt-bindings: soc: qcom: smd-rpm: add generic compatibles
Revert "soc: qcom: smd-rpm: Match rpmsg channel instead of compatible"
firmware: qcom: scm: Add multiple download mode support
firmware: qcom: scm: Refactor code to support multiple dload mode
soc: qcom: pd_mapper: Add more older platforms without domains
soc: qcom: pd_mapper: Add X1E80100
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/drivers
Microchip AT91 SoC updates for v6.12
It contains:
- support for the Microchip SAM9X7 SoC:
-- power management
-- SoC identification
-- sysreg documentation updates
-- necessary Kconfig updates
* tag 'at91-soc-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: Kconfig: add config flag for SAM9X7 SoC
ARM: at91: add support in SoC driver for new sam9x7
ARM: at91: pm: add sam9x7 SoC init config
ARM: at91: pm: add support for sam9x7 SoC family
dt-bindings: atmel-sysreg: add sam9x7
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
soc/drivers
Reset controller updates for v6.12
Use get_device()/put_device() to keep reset controller devices alive
while their reset controls are acquired.
Enable support for the Amlogic T7 SoC reset controller.
Remove unused EyeQ reset bindings and add a reset controller driver
to be instantiated as auxiliary device by the EyeQ clock driver.
Fix OF node leaks in the k210 and berlin probe() error paths.
Add some simplifications and cleanup in the core, lcp18xx driver, and
uniphier bindings.
* tag 'reset-for-v6.12' of git://git.pengutronix.de/pza/linux:
reset: eyeq: add platform driver
Revert "dt-bindings: reset: mobileye,eyeq5-reset: add bindings"
reset: reset-meson: Add support for Amlogic T7 SoC reset controller
dt-bindings: reset: Add Amlogic T7 reset controller
reset: core: add get_device()/put_device on rcdev
reset: lpc18xx: simplify with devm_clk_get_enabled()
reset: lpc18xx: simplify with dev_err_probe()
reset: simplify locking with guard()
reset: k210: fix OF node leak in probe() error path
reset: berlin: fix OF node leak in probe() error path
dt-bindings: reset: socionext,uniphier-glue-reset: add top-level constraints
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-04-2
this is a pull request of 18 patches for net-next/master.
All 18 patches add support for CAN-FD IP core found on Rockchip
RK3568.
The first patch is co-developed by Elaine Zhang and me and adds DT
bindings documentation.
The remaining 17 patches are by me and add the driver in several
stages.
linux-can-next-for-6.12-20240904-2
* tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: add support for CAN_CTRLMODE_BERR_REPORTING
can: rockchip_canfd: add support for CAN_CTRLMODE_LOOPBACK
can: rockchip_canfd: add hardware timestamping support
can: rockchip_canfd: enable full TX-FIFO depth of 2
can: rockchip_canfd: prepare to use full TX-FIFO depth
can: rockchip_canfd: add stats support for errata workarounds
can: rockchip_canfd: rkcanfd_get_berr_counter_corrected(): work around broken {RX,TX}ERRORCNT register
can: rockchip_canfd: implement workaround for erratum 12
can: rockchip_canfd: implement workaround for erratum 6
can: rockchip_canfd: add TX PATH
can: rockchip_canfd: rkcanfd_register_done(): add warning for erratum 5
can: rockchip_canfd: rkcanfd_handle_rx_int_one(): implement workaround for erratum 5: check for empty FIFO
can: rockchip_canfd: add notes about known issues
can: rockchip_canfd: add support for rk3568v3
can: rockchip_canfd: add quirk for broken CAN-FD support
can: rockchip_canfd: add quirks for errata workarounds
can: rockchip_canfd: add driver for Rockchip CAN-FD controller
dt-bindings: can: rockchip_canfd: add rockchip CAN-FD controller
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
i.MX28 has an RX DMA channel associated with the LCDIF controller.
Document the 'dmas' and 'dma-names' properties to fix the following
dt-schema warnings:
lcdif@80030000: 'dma-names', 'dmas' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert the NXP LPC18xx Watchdog Timer bindings to yaml format.
Cc: Daniel Baluta <[email protected]>
Signed-off-by: Animesh Agarwal <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert ziirave-wdt.txt to yaml format.
Additional change:
- Add i2c node in example.
- Add ref to watchdog.yaml
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a40000/watchdog@38:
failed to match any schema with compatible: ['zii,rave-wdt']
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The PM6150 vibrator module is compatible with the PMI632 vibrator
module, document the PM6150 vibrator compatible as fallback for the
PMI632 vibrator.
Signed-off-by: Jens Reidel <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.12
This introduces support for the following devices:
- Lenovo Thinkpad T14s Gen 6
- Microsoft Surface Laptop 7 laptop
- Lenovo A6000
- Lenovo A6010
- Samsung Galaxy J3,
- Lenovo Vibe K5 (multiple variants)
- LG G4
IPQ5332 global clock controller is marked as an interconnect-provider,
and the USB interrupt triggers are corrected.
Touchscreen description is added to the Samsung Galaxy Core Prime and
Max, and touch keys are added to the Samsung Galaxy Grand Prime and
Galaxy Tab A.
Camera flash is added to BQ Aquaris M5 and X5.
The SD-card slot is described for the QCM6490 IDP.
For SA8775P CPU and LLCC bwmon is added, audio, compute and general
purpose DSP remoteprocs are added, with FastRPC on audio and compute
DSP. CPUidle states, capacity and DPC properties are added.
On SC8180X definitions for the multiport USB controller is introduced,
and enabled on the Lenovo Flex 5G to bring the camera to life. Power key
definitions are added as well.
The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe
pinconf properties are cleaned up on this and the CRD. The four USB
Type-A ports found on the SA8295P ADP are enabled.
The modem subsystem remoteproc is introduced on the SDX75 and enabled on
the IDP device.
Camera, display and GPU clock controllers are added for the SM4450
platform.
On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card,
remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch,
caps lock LED and camera button are introduced.
The camera clock controller is added to SM8150, and the GPU-only
"amd,imageon" compatible is dropped from the MTP device.
Refgen regulator for the DSI nodes of SM8350 is described, and the
display subsystem interconnect paths are corrected.
The camera control interface controllers are described on both SM8550
and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650
HDK are transitioned to the power sequence description. WiFi is added to
the SM8550 hardware development kit (HDK).
On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB
multiport controller, a PCIe controller and PHY are added. Orientation
switching is wired up for the USB+DP PHYs. RPMh statistics node is
added. For the X1 Elite CRD the LID switch and the SDX65 modems are
introduced.
* tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: x1e80100: Fix PHY for DP2
arm64: dts: qcom: qcm6490-idp: Add SD Card node
arm64: dts: qcom: x1e80100: Add orientation-switch to all USB+DP QMP PHYs
arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6
dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6
Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash"
arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices
arm64: dts: qcom: x1e80100: Add UART2
arm64: dts: qcom: x1e80100-pmics: Add PMC8380C PWM
dt-bindings: arm: qcom: Add Surface Laptop 7 devices
arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon
arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes
arm64: dts: qcom: x1e80100: Add USB Multiport controller
arm64: dts: qcom: sa8775p: fix the fastrpc label
arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ5332 support
arm64: dts: qcom: sm8250: move lpass codec macros to use clks directly
arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6
dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions
arm64: dts: qcom: msm8976: Add restart node
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.12, round 1
Highlights:
-----------
- MPU:
- STM32MP13:
- DH DHSBC board:
- Fix Ethernet: MDIO lines in sleep, disable PHY clock out.
- Add nvmem cells for ETH MAC address (use OTP to get MAC addr)
- Add led usage for RTL8211 PHY.
- STMP32MP15:
- Protonic boards:
- Fix QSPI pins configuration for prtt1x boards.
- Add new MECI01 and MECT1S boards support:
- MECIO1: I/O and motor control used in blood sample anlysis.
- MECT1S: 1000 base-T1 switch for internal machine networks
of blood sample analysis machines.
- DH PDK2 board:
- Use SAI to generate bit and frame clock.
* tag 'stm32-dt-for-v6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: Add MECIO1 and MECT1S board variants
dt-bindings: arm: stm32: Add compatible strings for Protonic boards
ARM: dts: stm32: stm32mp151a-prtt1l: Fix QSPI configuration
ARM: dts: stm32: Describe PHY LEDs in DH STM32MP13xx DHCOR DHSBC board DT
ARM: dts: stm32: Add missing gpio options for sdmmc2_d47_pins_d
ARM: dts: stm32: Add ethernet MAC nvmem cells to DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: Disable PHY clock output on DH STM32MP13xx DHCOR DHSBC board
ARM: dts: stm32: Keep MDIO bus in AF across suspend DH STM32MP13xx DHCOR DHSBC board
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings changes for 6.12:
- New compatibles for boards: Kontron i.MX93 OSM-S, i.MX93 14x14 EVK,
Variscite Symphony and VAR-SOM-MX8MP, etc
- One spelling correction on TQ-Systems
- One renaming of gw7905 to gw75xx
* tag 'imx-bindings-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add Variscite Symphony board and VAR-SOM-MX8MP SoM
dt-bindings: arm: fsl: drop usage of VAR-SOM-MX8MM SoM compatible alone
dt-bindings: arm: fsl: rename gw7905 to gw75xx
dt-bindings: arm: fsl: Add Kontron i.MX93 OSM-S based boards
dt-bindings: arm: fsl: correct spelling of TQ-Systems
dt-bindings: arm: fsl: add fsl-ls2081a-rdb board
dt-bindings: arm: fsl: add i.MX93 14x14 EVK board
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
soc/dt
RISC-V Devicetrees for v6.12
Sopgho:
Added DMA controller for CV18XX.
Added I2C, MMC, GPIO and onboard MCU (HWMON) for SG2042.
Enable SDHCI0 for HuashanPi (using cv1812h).
Some minor changes about dt-bindings for Sipeed LicheeRV Nano board
(using SG2002, and SG2002 is the new codename of CV181xC).
Signed-off-by: Chen Wang <[email protected]>
* tag 'riscv-sophgo-dt-for-6.12' of https://github.com/sophgo/linux:
dt-bindings: riscv: Add Sipeed LicheeRV Nano board compatibles
dt-bindings: interrupt-controller: Add SOPHGO SG2002 plic
riscv: dts: sophgo: Add mcu device for Milk-V Pioneer
riscv: sophgo: dts: add gpio controllers for SG2042 SoC
riscv: sophgo: dts: add mmc controllers for SG2042 SoC
riscv: dts: sophgo: Add i2c device support for sg2042
riscv: dts: sophgo: Use common "interrupt-parent" for all peripherals for sg2042
riscv: dts: sophgo: Add sdhci0 configuration for Huashan Pi
riscv: dts: sophgo: cv18xx: add DMA controller
Link: https://lore.kernel.org/r/MA0P287MB28228F4FC59B057DF57D9A11FE9C2@MA0P287MB2822.INDP287.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.12
Generic Fixups/Cleanups:
- AM62, AM62A, AM64, AM65, AM62P: ESM node cleanups
- J784s4, J721s2, J721e, AM65: FSS (Flash subsystem) fixups for ranges
- j721e/j7200/j721s2/am68/am69 SK/SoM, IOT2050: Disable of R5F lockstep
- j721e/j7200/j721s2/am68/am69 reserve GP timers for firmware usage.
- Misc device tree warning fixups: Serdes simple-mfd fixes for
am654-serdes-ctrl; rename of gpio-hog nodes; mux-controller node names
SoC Specific features and Fixes:
New boards:
- AM67A/J722s based BeagleBoard.org Foundation's BeagleY-AI
AM62:
- Thermal throttling enabled
AM62A:
- Add E5010 JPEG encoder
AM62P:
- gpio-reserved ranges
- SK: drop cts/rts for wakeup_uart0 firmware console pinmux
J722s: (AM62P variant)
- IPC/Remote proc for C7x and R5F
- gpio-reserved ranges
- EVM: Add main_uart5 description and CAN support.
AM64x:
- adc description fixes for dtbs_check warnings
- tqma64xxl and phyboard-electra: Add PRUSS ICSSG capability
- CPSW Ethernet is now disabled by default at SoC level and enabled explicitly
at board level.
- USB property to add fall back to j721e
AM65x:
- IOT2050: Add overlays for M.2, add Eth phy LED description
- idk: Fixes for DMA causing dtbs_check warning, Add MCAN
J721e:
- SK and beagleboneai64: Fixes for inverted C6x carveouts
J721s2:
- AM68-SK: Fixes for mmc clkb internal mux, ospi partition for uboot.backup
alignment fixup.
J784s4:
- WDT clock ID fix.
- EVM: Use 4 lanes for PCIe0.
* tag 'ti-k3-dt-for-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (57 commits)
arm64: dts: ti: k3-j722s-evm: Enable Inter-Processor Communication
arm64: dts: ti: k3-j722s-main: Add R5F and C7x remote processor nodes
arm64: dts: ti: k3-am68-sk-som: Update Partition info for OSPI Flash
arm64: dts: ti: Add k3-am67a-beagley-ai
dt-bindings: arm: ti: Add BeagleY-AI
arm64: dts: ti: iot2050: Declare Ethernet PHY leds
arm64: dts: ti: k3-am65: Add ESM nodes
arm64: dts: ti: k3-am64: Add more ESM interrupt sources
arm64: dts: ti: k3-am62a: Add ESM nodes
arm64: dts: ti: k3-am62: Add comments to ESM nodes
arm64: dts: ti: k3-am62p: Fix ESM interrupt sources
arm64: dts: ti: k3-am62p: Remove 'reserved' status for ESM
arm64: dts: ti: k3-j721s2-evm-gesi-exp-board: Rename gpio-hog node name
arm64: dts: ti: k3-am642-evm-nand: Rename pinctrl node and gpio-hog names
arm64: dts: ti: k3-am654-idk: Fix dtbs_check warning in ICSSG dmas
arm64: dts: ti: k3-j784s4: Include entire FSS region in ranges
arm64: dts: ti: k3-j721s2: Include entire FSS region in ranges
arm64: dts: ti: k3-j721e: Include entire FSS region in ranges
arm64: dts: ti: k3-am65: Include entire FSS region in ranges
arm64: dts: ti: k3-am64: add USB fallback compatible to J721E
...
Link: https://lore.kernel.org/r/20240903155701.q7soxtplbkfofwxt@entering
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The device is compatible with rk3588, so add an entry for the 2
compatibles together.
The rk3576 device has a power-domain that needs to be on for the eMMC to
be used. Add it as a requirement.
Signed-off-by: Detlev Casanova <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.12 (take two)
- Add support for Ethernet TSN and PCIe on the R-Car V4H SoC and the
White-Hawk (Single) development board,
- Add display support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVk
board,
- Add I2C support for the RZ/G3S SoC and the RZ/G3S SMARC EVK board,
- Add support for HDMI audio on the RZ/G2L and RZ/G2LC SMARC EVK
boards,
- Add initial support for the RZ/V2H(P) (R9A09G057) SoC and the RZ/V2H
EVK board,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.12-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (34 commits)
arm64: dts: renesas: r8a779h0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779a0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779g0: Add family fallback for CSISP IP
arm64: dts: renesas: r8a779h0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779a0: Add family fallback for VIN IP
arm64: dts: renesas: r8a779g0: Add family fallback for VIN IP
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable watchdog
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable OSTM, I2C, and SDHI
arm64: dts: renesas: r9a09g057: Add WDT0-WDT3 nodes
arm64: dts: renesas: r9a09g057: Add SDHI0-SDHI2 nodes
arm64: dts: renesas: r9a09g057: Add RIIC0-RIIC8 nodes
arm64: dts: renesas: r9a09g057: Add OSTM0-OSTM7 nodes
arm64: dts: renesas: Add initial DTS for RZ/V2H EVK board
arm64: dts: renesas: Add initial SoC DTSI for RZ/V2H(P) SoC
dt-bindings: soc: renesas: Document RZ/V2H EVK board
dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPG
arm64: dts: renesas: r9a07g043u11-smarc: Enable DU
arm64: dts: renesas: rzg2lc-smarc: Enable HDMI audio
arm64: dts: renesas: rzg2l-smarc: Enable HDMI audio
arm64: dts: renesas: r9a07g043u: Add DU node
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add missing documentation for mmc_test.
Reviewed-by: Christian Loehle <[email protected]>
Signed-off-by: Avri Altman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Add compatible strings for Protonic MECIO1r0 and MECT1S boards to the
STM32MP151-based boards section and Protonic MECIO1r1 board to the
STM32MP153-based boards section.
MECIO1 is an I/O and motor control board used in blood sample analysis
machines. MECT1S is a 1000Base-T1 switch for internal machine networks
of blood sample analysis machines.
Signed-off-by: Oleksij Rempel <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Alexandre Torgue <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
A number of pin fixes for Puma, Rock-Pi-E and rk356x, and as it turns
out the VO0 and VO1 general register files are not identical as suggested
by their original compatible. As there are no users of those yet,
everybody agreed that we should fix the compatibles.
* tag 'v6.11-rockchip-dtsfixes' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
Link: https://lore.kernel.org/r/7602696.A5hrfCrGMc@diego
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Document support for the 16-Bit Timer Pulse Unit (TPU) in the Renesas
R-Car V4M (R8A779H0) SoC.
Signed-off-by: Wolfram Sang <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Document support for the PWM timers in the Renesas R-Car V4M (R8A779H0)
SoC.
Signed-off-by: Wolfram Sang <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Document what was discussed multiple times on list and various
virtual / in-person conversations. guard() being okay in functions
<= 20 LoC is a bit of my own invention. If the function is trivial
it should be fine, but feel free to disagree :)
We'll obviously revisit this guidance as time passes and we and other
subsystems get more experience.
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|