| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Document Adreno X185 GMU in the dt-binding specification.
Signed-off-by: Akhil P Oommen <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/601395/
Signed-off-by: Rob Clark <[email protected]>
|
|
AD7606-8 is referred to as AD7606 by Analog Devices. This comment aims
to avoid confusion. Also the compatible names were not sorted by
alphabetical order.
Signed-off-by: Guillaume Stols <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add AD7606-5 datasheet link.
Signed-off-by: Guillaume Stols <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The MyGica UTV3 Analog USB2.0 TV Box is a USB video capture card
that has analog TV, composite video, and FM radio inputs, an IR
remote, and provides audio only as Line Out, but not over USB.
Mine is prepared for an FM tuner, but not equipped with one.
Support for FM radio is therefore missing. The device contains:
- Empia EM2860 USB bridge
- Philips SAA7113 video decoder
- NXP TDA9801T demodulator
- Tena TNF931D-DFDR1 tuner
- ST HCF4052 demux, switches input audio to Line Out
Signed-off-by: Nils Rothaug <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Add a binding for the rc-mygica-utv3 keymap
Signed-off-by: Nils Rothaug <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Tuner ranges were determined by USB capturing the vendor driver of a
MyGica UTV3 video capture card.
Signed-off-by: Nils Rothaug <[email protected]>
Signed-off-by: Sean Young <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
In arch/arm64/include/uapi/asm/kvm.h, we have
#define KVM_VGIC_V2_CPU_SIZE 0x2000
So the CPU interface address space should cover 8 KByte not 4 KByte.
Signed-off-by: Changyuan Lyu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
The expression `irq_type[n]` may confuse readers to interpret `n`
as the bit position and think of CPU = 1 << 0, SPI = 1 << 1, and
PPI = 1 << 2.
Since arch/arm64/include/uapi/asm/kvm.h already has macro definitions
for the allowed values, this commit uses these symbols to clear up
the ambiguity.
Signed-off-by: Changyuan Lyu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
BDF is the acronym for Bus, Device, Function.
Signed-off-by: Changyuan Lyu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Oliver Upton <[email protected]>
|
|
Fix warnings on DFSDM dtbs check
Unevaluated properties are not allowed ('dfsdm-dai' was unexpected)
'port' does not match any of the regexes: 'pinctrl-[0-9]+'
Fixes: 11183ac07a74 ("dt-bindings: stm32: convert dfsdm to json-schema")
Signed-off-by: Olivier Moysan <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add the device-tree bindings for interconnect providers
used on MSM8953 platform.
Signed-off-by: Vladimir Lypak <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Barnabás Czémán <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The 'offline' file in sysfs shows all offline CPUs, including those
that aren't present. User-space is expected to remove not-present CPUs
from this list to learn which CPUs could be brought online.
CPUs can be present but not-enabled. These CPUs can't be brought online
until the firmware policy changes, which comes with an ACPI notification
that will register the CPUs.
With only the offline and present files, user-space is unable to
determine which CPUs it can try to bring online. Add a new CPU mask
that shows this based on all the registered CPUs.
Signed-off-by: James Morse <[email protected]>
Tested-by: Miguel Luis <[email protected]>
Tested-by: Vishnu Pajjuri <[email protected]>
Tested-by: Jianyong Wu <[email protected]>
Acked-by: Thomas Gleixner <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Reviewed-by: Gavin Shan <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Add a description of physical and virtual CPU hotplug, explain the
differences and elaborate on what is required in ACPI for a working
virtual hotplug system.
Signed-off-by: James Morse <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Russell King (Oracle) <[email protected]>
Tested-by: Miguel Luis <[email protected]>
Reviewed-by: Gavin Shan <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Add support for MPS VR controller mp2891. This driver exposes
telemetry and limit value readings and writtings.
Signed-off-by: Noah Wang <[email protected]>
Link: https://lore.kernel.org/r/SEYPR04MB64828A352836982C0184AA10FAD62@SEYPR04MB6482.apcprd04.prod.outlook.com
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Add support for MPS mp2891 controller
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Noah Wang <[email protected]>
Link: https://lore.kernel.org/r/SEYPR04MB6482BC95D1242A5675FF9DAEFAD62@SEYPR04MB6482.apcprd04.prod.outlook.com
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Merge series from Piotr Wojtaszczyk <[email protected]>:
This pach set is to bring back audio to machines with a LPC32XX CPU.
The legacy LPC32XX SoC used to have audio spport in linux 2.6.27.
The support was dropped due to lack of interest from mainaeners.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards, the Radxa ROCK S0, Radxa ZERO 3W/3E, CM3588 NAS solution
and Neardi LBA3368.
Interesting core changes: dropping of the rk3399pro dtsi - Dragan dug
through available information, boards and found out that the pcie-stuff
described in the existing rk3399pro dtsi is actually not true and the
file can go away.
And also a bit of reorganizing of rk3588 dtsi files. There are number
of rk3588 variants in existence that select between two sets of
peripherals and also multiple sets of operating points. So the change
sorts it differently so that we stop including one soc-variant into
others and also make room for the operating points.
The rk3308 got io domains, a number of additions to the rk3308-rock-pi-s
board (wifi, io-domains, otp, ethernet, uart, sdmmc).
And then there are of course the usual set of new additions like
rk3588 pcie endpoint support and individual peripherals for boards.
* tag 'v6.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (42 commits)
arm64: dts: rockchip: Delete the SoC variant dtsi for RK3399Pro
arm64: dts: rockchip: Fix mic-in-differential usage on rk3568-evb1-v10
arm64: dts: rockchip: Fix mic-in-differential usage on rk3566-roc-pc
arm64: dts: rockchip: Drop invalid mic-in-differential on rk3568-rock-3a
arm64: dts: rockchip: Add rock5b overlays for PCIe endpoint mode
arm64: dts: rockchip: Add PCIe endpoint mode support
arm64: dts: rockchip: Increase VOP clk rate on RK3328
arm64: dts: rockchip: add gpio-line-names to radxa-zero-3
arm64: dts: rockchip: Split GPU OPPs of RK3588 and RK3588j
arm64: dts: rockchip: Add OPP data for CPU cores on RK3588j
arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
arm64: dts: rockchip: Add CPU/memory regulator coupling for 2 RK3588 boards
arm64: dts: rockchip: fix mmc aliases for Radxa ZERO 3E/3W
arm64: dts: rockchip: Add Neardi LBA3368 board
dt-bindings: arm: rockchip: Add Neardi LBA3368
dt-bindings: vendor-prefixes: Add Neardi Technology
arm64: dts: rockchip: Enable PinePhone Pro vibrator
arm64: dts: rockchip: Enable PinePhone Pro IMU sensor
arm64: dts: rockchip: Add Pinephone Pro support for GPIO LEDs
arm64: dts: rockchip: Enable SPI flash on PinePhone Pro
...
Link: https://lore.kernel.org/r/4901395.GXAFRqVoOG@diego
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DT binding updates for v6.11
- Document support for R-Car E-FUSE controllers.
* tag 'renesas-dt-bindings-for-v6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: fuse: Document R-Car E-FUSE / OTP_MEM
dt-bindings: fuse: Document R-Car E-FUSE / PFC
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DTS updates for v6.11
This introduces the new Airoha (MediaTek) EN7581 home networking
platform (routers) in early stages, but with support for its
Evaluation Board, a few more MediaTek based machines, and
improvements for existing ones.
For the MT7981 router SoC we get pinctrl support, along with the
enablement of its watchdog, eFuse/nvmem, I2C and integrated WiFi
controller, other than the introduction of new machines based on
this chip: the Cudy WR3000 V1 router and the OpenWRT One.
MT7986 gets a new machine: the BananaPi R3 Mini.
Some advancements have been done also on the MT7988 SoC, which
gains support for its I2C, PWM and USB XHCI controllers.
MediaTek Genio SoCs also get attention, with the introduction of a
basic device tree for the MT8390 Genio 700-EVK board, and for the
MT8395 Genio 1200 powered Kontron 3.5"-SBC-i1200.
Additionally, the Genio 1200 Radxa NIO12L board gets support for
USB Role Switching and proper PCI-Express controller PM suspend
and resume, other than finally enabling CPU and GPU frequency
and voltage scaling for improved efficiency.
Speaking of MediaTek Kompanio SoCs (Chromebooks) instead, thanks
to community interest and help in testing, there comes support for
the MT8195-powered HP Chromebook X360 13b-ca0002sa, while Google
contributed support for the MT8186-powered Acer Chromebook 311.
Moreover, MT8188 gets support for its integrated power domains,
other than its Global Command Engine (GCE) mailboxes, initial
basic support for the VDO0/1 blocks for multimedia, and its GPU
(ARM Mali G57-MC3, Valhall-JM) with Panfrost.
Besides that, this also adds a few other cleanups and improvements
for all machines using the MT8183, MT8192, MT8195/MT8395 SoCs and
adds generation of symbols on base devicetrees of machines using
Device Tree Overlay(s) (DTBO).
In particular:
- The MediaTek Smart Voltage Scaling (SVS) is now fully working
those SoCs, bringing further power efficiency improvements;
- Thermal zones were refactored on MT8183 for consistency with
the other MediaTek SoCs and for readability
- Sound DAI links are now consistently specified in device tree
on MT8195 and MT8186 machines
- Newly supported machines/boards
- EN7581: EVK
- MT7981: Cudy WR3000 V1, OpenWRT One
- MT7986: BananaPi R3 Mini
- MT8186: Acer Chromebook 311 (Corsola Voltorb)
- MT8195: HP Chromebook X360 13b-ca0002sa (Cherry Dojo)
- MT8390/8188: Genio 700 EVK
- Some cleanups for unused/legacy devicetree properties
* tag 'mtk-dts64-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (58 commits)
arm64: dts: mediatek: Declare drive-strength numerically
arm64: dts: mt7622: fix switch probe on bananapi-r64
arm64: dts: mediatek: Add MT8186 Voltorb Chromebooks
dt-bindings: arm: mediatek: Add MT8186 Voltorb Chromebooks
arm64: dts: mediatek: Makefile: Generate symbols for DTBO support
arm64: dts: mediatek: mt8183-kukui-jacuzzi: Add ports node for anx7625
arm64: dts: mediatek: mt8183-pico6: Fix wake-on-X event node names
arm64: dts: mt8173: Add G2Touch touchscreen node
arm64: dts: mediatek: mt8183-kukui: Fix the value of `dlg,jack-det-rate` mismatch
arm64: dts: mediatek: mt8188: Add support for Mali GPU on Panfrost
arm64: dts: mediatek: mt8188: Add support for SoC power domains
arm64: dts: mediatek: mt8188: Add VDOSYS0/1 support for multimedia
arm64: dts: mediatek: mt8188: Add Global Command Engine mailboxes
arm64: dts: mediatek: mt8173-elm: drop PMIC's syscon node
arm64: dts: mediatek: mt8365: use a specific SCPSYS compatible
arm64: dts: mediatek: mt8365: drop incorrect power-domain-cells
arm64: dts: mediatek: mt7981: add I2C controller
arm64: dts: mediatek: mt7622: fix "emmc" pinctrl mux
arm64: dts: mediatek: mt7988: add I2C controllers
arm64: dts: mediatek: mt7988: add PWM controller
...
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Convert the marvell,mpic device-tree binding to YAML. Add myself as
maintainer.
Signed-off-by: Marek Behún <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Marvell 88PM886 is a PMIC with several subdevices such as onkey,
regulators or battery and charger. It comes in at least two revisions,
A0 and A1 -- only A1 is described here at the moment.
Signed-off-by: Karel Balej <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
CS40L50 is a haptic driver with waveform memory,
integrated DSP, and closed-loop algorithms.
Add a YAML DT binding document for this device.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: James Ogletree <[email protected]>
Reviewed-by: Jeff LaBundy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/arm
Arm Vexpress updates for v6.11
Remove obsolete RTSM DCSCB support which was only ever implemented
on a software model which is neither available to download nor
maintained. It predates the very first bL cluster based platforms.
Other change include addition of the missing MODULE_DESCRIPTION
macro in vexpress config bus driver.
* tag 'vexpress-updates-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
bus: vexpress-config: Add missing MODULE_DESCRIPTION() macro
dt-bindings: arm: Remove obsolete RTSM DCSCB binding
arm: vexpress: Remove obsolete RTSM DCSCB support
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
When the grace period kthread checks the extended quiescent state
counter of a CPU, full ordering is necessary to ensure that either:
* If the GP kthread observes the remote target in an extended quiescent
state, then that target must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it exits that extended quiescent state.
or:
* If the GP kthread observes the remote target NOT in an extended
quiescent state, then the target further entering in an extended
quiescent state must observe all accesses prior to the current
grace period, including the current grace period sequence number, once
it enters that extended quiescent state.
This ordering is enforced through a full memory barrier placed right
before taking the first EQS snapshot. However this is superfluous
because the snapshot is taken while holding the target's rnp lock which
provides the necessary ordering through its chain of
smp_mb__after_unlock_lock().
Remove the needless explicit barrier before the snapshot and put a
comment about the implicit barrier newly relied upon here.
Signed-off-by: Frederic Weisbecker <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
Reviewed-by: Boqun Feng <[email protected]>
Reviewed-by: Neeraj Upadhyay <[email protected]>
Signed-off-by: Paul E. McKenney <[email protected]>
|
|
In cloud environments it can be useful to *only* enable the vmexit
mitigation and leave syscalls vulnerable. Add that as an option.
This is similar to the old spectre_bhi=auto option which was removed
with the following commit:
36d4fe147c87 ("x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto")
with the main difference being that this has a more descriptive name and
is disabled by default.
Mitigation switch requested by Maksim Davydov <[email protected]>.
[ bp: Massage. ]
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Reviewed-by: Daniel Sneddon <[email protected]>
Reviewed-by: Nikolay Borisov <[email protected]>
Link: https://lore.kernel.org/r/2cbad706a6d5e1da2829e5e123d8d5c80330148c.1719381528.git.jpoimboe@kernel.org
|
|
Duplicating the documentation of all the Spectre kernel cmdline options
in two separate files is unwieldy and error-prone. Instead just add a
reference to kernel-parameters.txt from spectre.rst.
Signed-off-by: Josh Poimboeuf <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Reviewed-by: Daniel Sneddon <[email protected]>
Link: https://lore.kernel.org/r/450b5f4ffe891a8cc9736ec52b0c6f225bab3f4b.1719381528.git.jpoimboe@kernel.org
|
|
On i.MX8MP, there are 3 interrupts, the third interrupt is
SPDIF wakeup interrupt from PHY
Add ref: dai-common.yaml for #sound-dai-cells is needed and
XCVR is a DAI device.
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add nxp,lpc3220-i2s DT binding documentation.
Signed-off-by: Piotr Wojtaszczyk <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
CMIS compliant modules such as QSFP-DD might be running a firmware that
can be updated in a vendor-neutral way by exchanging messages between
the host and the module as described in section 7.3.1 of revision 5.2 of
the CMIS standard.
Add a pair of new ethtool messages that allow:
* User space to trigger firmware update of transceiver modules
* The kernel to notify user space about the progress of the process
The user interface is designed to be asynchronous in order to avoid
RTNL being held for too long and to allow several modules to be
updated simultaneously. The interface is designed with CMIS compliant
modules in mind, but kept generic enough to accommodate future use
cases, if these arise.
Signed-off-by: Danielle Ratson <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add "st,stm32mp25-lvds" compatible.
Signed-off-by: Raphael Gallais-Pou <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Acked-by: Yannick Fertre <[email protected]>
Signed-off-by: Philippe Cornu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The kingdisplay-kd101ne3 is a 10.1" WXGA TFT-LCD panel with
jadard-jd9365da controller. Hence, we add a new compatible
with panel specific config.
Signed-off-by: Zhaoxiong Lv <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add AUO G104STN01 10.4" LCD-TFT LVDS panel compatible string.
Signed-off-by: Paul Gerber <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add common gpio-line-names property for fsl,qoriq-gpio to fix below
warning.
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb: gpio@2300000: 'gpio-line-names' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/gpio/fsl,qoriq-gpio.yaml
Signed-off-by: Frank Li <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
|
|
Extract known PHY IDs from Linux kernel realtek PHY driver
and convert them into supported compatible string list for
this DT binding document.
Signed-off-by: Marek Vasut <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Modify section "Video and Sliced VBI Looping" in Documentation to explain
the vivid loopback support for video across multiple vivid instances.
Previous documentation is out-of-date as it was explaining looping in a
single vivid instance only.
Also, in "Some Future Improvements" the item "Add support to loop
from a specific output to a specific input across vivid instances"
can be dropped since that's now implemented.
Signed-off-by: Dorcas Anono Litunya <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Instead of using hardwired video loopback limited to a single vivid
instance, use the new 'Connected To' controls to only loopback if an
HDMI or S-Video input is connected to another output, which can be
in another vivid instance. Effectively this emulates connecting and
disconnecting an HDMI/S-Video cable.
The Loop Video control is dropped since it has now been replaced by
the new 'Connected To' controls. The Display Present has also been
dropped since it no longer fits.
Signed-off-by: Hans Verkuil <[email protected]>
Co-developed-by: Dorcas Anono Litunya <[email protected]>
Signed-off-by: Dorcas Anono Litunya <[email protected]>
|
|
Modifying documentation to remove 'Capture Overlay section' as
destructive capture overlay support was removed.
See commit ccaa9d50ca73 ("media: vivid: drop overlay support")
Signed-off-by: Dorcas Anono Litunya <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The module option supports_requests was not documented, add it.
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Drop the "Video, VBI and RDS Looping" section, instead moving the
Video/VBI info to section "Video and Sliced VBI looping" and the
RDS info to section "Radio & RDS Looping".
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The documentation contained several instances of "section X"
references, which no longer map to whatever X was.
Replace these by the section titles.
Also fix a single confusing typo in the "Radio & RDS Looping" section:
"are regular frequency intervals" -> "at regular frequency intervals"
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The TRNG block in Exynos850 is pretty much the same as in Exynos5250,
but there are two clocks that has to be controlled to make it work:
1. Functional (operating) clock: called ACLK in Exynos850, the same as
"secss" clock in Exynos5250
2. Interface (bus) clock: called PCLK in Exynos850. It has to be
enabled in order to access TRNG registers
Document Exynos850 compatible and the related clock changes.
Signed-off-by: Sam Protsenko <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
https://github.com/HabanaAI/drivers.accel.habanalabs.kernel into drm-next
This tag contains habanalabs driver changes for v6.11.
The notable changes are:
- uAPI changes:
- Use device-name directory in debugfs-driver-habanalabs.
- Expose server type in debugfs.
- New features and improvements:
- Gradual sleep in polling memory macro.
- Reduce Gaudi2 MSI-X interrupt count to 128.
- Add Gaudi2-D revision support.
- Firmware related changes:
- Add timestamp to CPLD info.
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error.
- Align Gaudi2 interrupt names.
- Check for errors after preboot is ready.
- Bug fixes and code cleanups:
- Move heartbeat work initialization to early init.
- Fix a race when receiving events during reset.
- Change the heartbeat scheduling point.
- Maintainers:
- Change habanalabs maintainer and git repo path.
Signed-off-by: Dave Airlie <[email protected]>
From: Ofir Bitton <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The http://processors.wiki.ti.com EOL in january 2021
Fix the old URL with the new one.
Signed-off-by: Richard Genoud <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Convert dt-binding doc "rtc-fsl-ftm-alarm.txt" to yaml format.
Change example's reg to 32bit address and length.
Remove unrelated rcpm@1e34040 in example.
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.11:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- panic: Monochrome logo support, Various fixes
- ttm: Improve the number of page faults on some platforms, Fix test
build breakage with PREEMPT_RT, more test coverage and various test
improvements
Driver Changes:
- Add missing MODULE_DESCRIPTION where needed
- ipu-v3: Various fixes
- vc4: Monochrome TV support
- bridge:
- analogix_dp: Various improvements and reworks, handle AUX
transfers timeout
- tc358767: Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR, Fix clock
calculations
- panels:
- More transitions to mipi_dsi wrapped functions
- New panels: Lincoln Technologies LCD197, Ortustech COM35H3P70ULC,
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627-congenial-pistachio-nyala-848cf4@houat
|
|
These have been announced so add them to the table.
Acked-by: Alex Deucher <[email protected]>
Link: https://www.amd.com/en/products/processors/desktops/ryzen/9000-series/amd-ryzen-9-9950x.html
Signed-off-by: Mario Limonciello <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
These have been announced so add them to the table.
Acked-by: Alex Deucher <[email protected]>
Link: https://www.amd.com/en/products/processors/laptop/ryzen/300-series/amd-ryzen-ai-9-hx-370.html
Signed-off-by: Mario Limonciello <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge more amd-pstate driver updates for 6.11 from Mario Limonciello:
"Add support for amd-pstate core performance boost support which
allows controlling which CPU cores can operate above nominal
frequencies for short periods of time."
* tag 'amd-pstate-v6.11-2024-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
cpufreq: amd-pstate: initialize core precision boost state
cpufreq: acpi: move MSR_K7_HWCR_CPB_DIS_BIT into msr-index.h
|
|
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling")
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <[email protected]>
|