aboutsummaryrefslogtreecommitdiff
path: root/Documentation/networking
AgeCommit message (Collapse)AuthorFilesLines
2023-04-10docs: net: use C syntax highlight in driver.rstJakub Kicinski1-10/+20
Use syntax highlight, comment out the "..." since they are not valid C. Signed-off-by: Jakub Kicinski <[email protected]>
2023-04-10docs: net: move the probe and open/close sections of driver.rst upJakub Kicinski1-27/+27
Somehow it feels more right to start from the probe then open, then tx... Much like the lifetime of the driver itself. Signed-off-by: Jakub Kicinski <[email protected]>
2023-04-10docs: net: reformat driver.rst from a list to sectionsJakub Kicinski1-35/+56
driver.rst had a historical form of list of common problems. In the age os Sphinx and rendered documentation it's better to use the more usual title + text format. This will allow us to render kdoc into the output more naturally. No changes to the actual text. Signed-off-by: Jakub Kicinski <[email protected]>
2023-04-07tcp: restrict net.ipv4.tcp_app_winYueHaibing1-0/+2
UBSAN: shift-out-of-bounds in net/ipv4/tcp_input.c:555:23 shift exponent 255 is too large for 32-bit type 'int' CPU: 1 PID: 7907 Comm: ssh Not tainted 6.3.0-rc4-00161-g62bad54b26db-dirty #206 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x136/0x150 __ubsan_handle_shift_out_of_bounds+0x21f/0x5a0 tcp_init_transfer.cold+0x3a/0xb9 tcp_finish_connect+0x1d0/0x620 tcp_rcv_state_process+0xd78/0x4d60 tcp_v4_do_rcv+0x33d/0x9d0 __release_sock+0x133/0x3b0 release_sock+0x58/0x1b0 'maxwin' is int, shifting int for 32 or more bits is undefined behaviour. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-30Documentation/eth/intel: Remove references to SourceForgeTony Nguyen11-51/+1
The out-of-tree driver is hosted on SourceForge, as this does not apply to the kernel driver remove references to it. Also do some minor formatting changes around this section. Suggested-by: Jesse Brandeburg <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]>
2023-03-30Documentation/eth/intel: Update address for driver supportTony Nguyen11-11/+11
Update the email address for support to use Intel Wired LAN, the mailing list used for kernel development. Suggested-by: Jesse Brandeburg <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]>
2023-03-28net/mlx5e: RX, Remove unnecessary recycle parameter and page_cache statsDragos Tatulea1-26/+0
The recycle parameter used during page release is no longer necessary: the page pool can detect when the page cannot be recycled to the cache or ring without any outside hint. The page pool will also take care of cleaning up after itself once all the inflight pages have been released. So no need to explicitly release pages to the system. Remove the internal page_cache stats as the mlx5e_page_cache struct no longer exists. Delete the documentation entries along with the stats. Signed-off-by: Dragos Tatulea <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-03-27ethtool: Add support for configuring tx_push_buf_lenShay Agroskin1-16/+31
This attribute, which is part of ethtool's ring param configuration allows the user to specify the maximum number of the packet's payload that can be written directly to the device. Example usage: # ethtool -G [interface] tx-push-buf-len [number of bytes] Co-developed-by: Jakub Kicinski <[email protected]> Signed-off-by: Shay Agroskin <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+5
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c 6e9d51b1a5cb ("net/mlx5e: Initialize link speed to zero") 1bffcea42926 ("net/mlx5e: Add devlink hairpin queues parameters") https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/[email protected]/ Adjacent changes: drivers/net/phy/phy.c 323fe43cf9ae ("net: phy: Improved PHY error reporting in state machine") 4203d84032e2 ("net: phy: Ensure state transitions are processed from phy_stop()") Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-23docs: networking: document NAPIJakub Kicinski6-8/+261
Add basic documentation about NAPI. We can stop linking to the ancient doc on the LF wiki. Link: https://lore.kernel.org/all/[email protected]/ Reviewed-by: Bagas Sanjaya <[email protected]> Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Acked-by: Pavel Pisa <[email protected]> # for ctucanfd-driver.rst Reviewed-by: Tony Nguyen <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Stephen Hemminger <[email protected]> Reviewed-by: Randy Dunlap <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-22xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver supportJesper Dangaard Brouer1-2/+5
When driver doesn't implement a bpf_xdp_metadata kfunc the fallback implementation returns EOPNOTSUPP, which indicate device driver doesn't implement this kfunc. Currently many drivers also return EOPNOTSUPP when the hint isn't available, which is ambiguous from an API point of view. Instead change drivers to return ENODATA in these cases. There can be natural cases why a driver doesn't provide any hardware info for a specific hint, even on a frame to frame basis (e.g. PTP). Lets keep these cases as separate return codes. When describing the return values, adjust the function kernel-doc layout to get proper rendering for the return values. Fixes: ab46182d0dcb ("net/mlx4_en: Support RX XDP metadata") Fixes: bc8d405b1ba9 ("net/mlx5e: Support RX XDP metadata") Fixes: 306531f0249f ("veth: Support RX XDP metadata") Fixes: 3d76a4d3d4e5 ("bpf: XDP metadata RX kfuncs") Signed-off-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Stanislav Fomichev <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Acked-by: Tariq Toukan <[email protected]> Link: https://lore.kernel.org/r/167940675120.2718408.8176058626864184420.stgit@firesoul Signed-off-by: Alexei Starovoitov <[email protected]>
2023-03-19ixgb: Remove ixgb driverTony Nguyen2-469/+0
There are likely no users of this driver as the hardware has been discontinued since 2010. Remove the driver and all references to it in documentation. Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-15net/mlx5e: Add devlink hairpin queues parametersGal Pressman2-0/+47
We refer to a TC NIC rule that involves forwarding as "hairpin". Hairpin queues are mlx5 hardware specific implementation for hardware forwarding of such packets. Per the discussion in [1], move the hairpin queues control (number and size) from debugfs to devlink. Expose two devlink params: - hairpin_num_queues: control the number of hairpin queues - hairpin_queue_size: control the size (in packets) of the hairpin queues [1] https://lore.kernel.org/all/[email protected]/ Signed-off-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-27Merge tag 'net-6.3-rc1' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. The notable fixes here are the EEE fix which restores boot for many embedded platforms (real and QEMU); WiFi warning suppression and the ICE Kconfig cleanup. Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" * tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) tcp: tcp_check_req() can be called from process context net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard xen-netback: remove unused variables pending_idx and index net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy net: dsa: ocelot_ext: remove unnecessary phylink.h include net: mscc: ocelot: fix duplicate driver name error net: dsa: felix: fix internal MDIO controller resource length net: dsa: seville: ignore mscc-miim read errors from Lynx PCS net/sched: act_sample: fix action bind logic net/sched: act_mpls: fix action bind logic net/sched: act_pedit: fix action bind logic wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue qede: avoid uninitialized entries in coal_entry array nfc: fix memory leak of se_io context in nfc_genl_se_io ice: remove unnecessary CONFIG_ICE_GNSS net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy() ibmvnic: Assign XPS map to correct queue index docs: net: fix inaccuracies in msg_zerocopy.rst tools: net: add __pycache__ to gitignore ...
2023-02-24docs: net: fix inaccuracies in msg_zerocopy.rstnick black1-3/+3
Replace "sendpage" with "sendfile". Remove comment about ENOBUFS when the sockopt hasn't been set; experimentation indicates that this is not true. Signed-off-by: nick black <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://lore.kernel.org/r/Y/gg/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-22Merge tag 'docs-6.3' of git://git.lwn.net/linuxLinus Torvalds1-52/+52
Pull documentation updates from Jonathan Corbet: "It has been a moderately calm cycle for documentation; the significant changes include: - Some significant additions to the memory-management documentation - Some improvements to navigation in the HTML-rendered docs - More Spanish and Chinese translations ... and the usual set of typo fixes and such" * tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits) Documentation/watchdog/hpwdt: Fix Format Documentation/watchdog/hpwdt: Fix Reference Documentation: core-api: padata: correct spelling docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION docs: Use HTML comments for the kernel-toc SPDX line docs: Add more information to the HTML sidebar Documentation: KVM: Update AMD memory encryption link printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay= Documentation: userspace-api: correct spelling Documentation: sparc: correct spelling Documentation: driver-api: correct spelling Documentation: admin-guide: correct spelling docs: add workload-tracing document to admin-guide docs/admin-guide/mm: remove useless markup docs/mm: remove useless markup docs/mm: Physical Memory: remove useless markup docs/sp_SP: Add process magic-number translation docs: ftrace: always use canonical ftrace path Doc/damon: fix the data path error dma-buf: Add "dma-buf" to title of documentation ...
2023-02-16sfc: add devlink info support for ef100Alejandro Lucero2-0/+58
Add devlink info support for ef100. The information reported is obtained through the MCDI interface with the specific meaning defined in new documentation file. Signed-off-by: Alejandro Lucero <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Acked-by: Martin Habets <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-02-15Merge tag 'mlx5-updates-2023-02-10' of ↵Jakub Kicinski1-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-02-10 1) From Roi and Mark: MultiPort eswitch support MultiPort E-Switch builds on newer hardware's capabilities and introduces a mode where a single E-Switch is used and all the vports and physical ports on the NIC are connected to it. The new mode will allow in the future a decrease in the memory used by the driver and advanced features that aren't possible today. This represents a big change in the current E-Switch implantation in mlx5. Currently, by default, each E-Switch manager manages its E-Switch. Steering rules in each E-Switch can only forward traffic to the native physical port associated with that E-Switch. While there are ways to target non-native physical ports, for example using a bond or via special TC rules. None of the ways allows a user to configure the driver to operate by default in such a mode nor can the driver decide to move to this mode by default as it's user configuration-driven right now. While MultiPort E-Switch single FDB mode is the preferred mode, older generations of ConnectX hardware couldn't support this mode so it was never implemented. Now that there is capable hardware present, start the transition to having this mode by default. Introduce a devlink parameter to control MultiPort Eswitch single FDB mode. This will allow users to select this mode on their system right now and in the future will allow the driver to move to this mode by default. 2) From Jiri: Improvements and fixes for mlx5 netdev's devlink logic 2.1) Cleanups related to mlx5's devlink port logic 2.2) Move devlink port registration to be done before netdev alloc 2.3) Create auxdev devlink instance in the same ns as parent devlink 2.4) Suspend auxiliary devices only in case of PCI device suspend * tag 'mlx5-updates-2023-02-10' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Suspend auxiliary devices only in case of PCI device suspend net/mlx5: Remove "recovery" arg from mlx5_load_one() function net/mlx5e: Create auxdev devlink instance in the same ns as parent devlink net/mlx5e: Move devlink port registration to be done before netdev alloc net/mlx5e: Move dl_port to struct mlx5e_dev net/mlx5e: Replace usage of mlx5e_devlink_get_dl_port() by netdev->devlink_port net/mlx5e: Pass mdev to mlx5e_devlink_port_register() net/mlx5: Remove outdated comment net/mlx5e: TC, Remove redundant parse_attr argument net/mlx5e: Use a simpler comparison for uplink rep net/mlx5: Lag, Add single RDMA device in multiport mode net/mlx5: Lag, set different uplink vport metadata in multiport eswitch mode net/mlx5: E-Switch, rename bond update function to be reused net/mlx5e: TC, Add peer flow in mpesw mode net/mlx5: Lag, Control MultiPort E-Switch single FDB mode ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-15devlink: Update devlink health documentationMoshe Shemesh1-2/+21
Update devlink-health.rst file: - Add devlink formatted message (fmsg) API documentation. - Add auto-dump as a condition to do dump once error reported. - Expand OOB to clarify this acronym. Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-14net/mlx5: Lag, Control MultiPort E-Switch single FDB modeRoi Dayan1-0/+18
MultiPort E-Switch builds on newer hardware's capabilities and introduces a mode where a single E-Switch is used and all the vports and physical ports on the NIC are connected to it. The new mode will allow in the future a decrease in the memory used by the driver and advanced features that aren't possible today. This represents a big change in the current E-Switch implantation in mlx5. Currently, by default, each E-Switch manager manages its E-Switch. Steering rules in each E-Switch can only forward traffic to the native physical port associated with that E-Switch. While there are ways to target non-native physical ports, for example using a bond or via special TC rules. None of the ways allows a user to configure the driver to operate by default in such a mode nor can the driver decide to move to this mode by default as it's user configuration-driven right now. While MultiPort E-Switch single FDB mode is the preferred mode, older generations of ConnectX hardware couldn't support this mode so it was never implemented. Now that there is capable hardware present, start the transition to having this mode by default. Introduce a devlink parameter to control MultiPort E-Switch single FDB mode. This will allow users to select this mode on their system right now and in the future will allow the driver to move to this mode by default. Example: $ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \ cmode runtime Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-13net: ethtool: extend ringparam set/get APIs for rx_pushShannon Nelson1-2/+4
Similar to what was done for TX_PUSH, add an RX_PUSH concept to the ethtool interfaces. Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-08net: txgbe: Update support email addressJiawen Wu1-1/+1
Update new email address for Wangxun 10Gb NIC support team. Signed-off-by: Jiawen Wu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-04net/mlx5: Document support for RoCE HCA disablement capabilityRahul Rameshbabu1-3/+5
Some mlx5 devices are capable of disabling RoCE. In this situation, disablement does not need to be handled at the driver level. Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Shay Drory <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-04net/mlx5: Add counter information to mlx5 driver documentationRahul Rameshbabu2-0/+1303
Update rst file to contain general information about statistics counters for the mlx5 driver. Add specifics about individual counters in list tables. Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-04net/mlx5: Document previously implemented mlx5 tracepointsRahul Rameshbabu1-3/+24
Tracepoints were previously implemented but not documented till this patch series. Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-04net/mlx5: Update Kconfig parameter documentationRahul Rameshbabu2-29/+100
Provide information for Kconfig flags defined but not documented till this patch series for the mlx5 driver. Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-04net/mlx5: Separate mlx5 driver documentation into multiple pagesRahul Rameshbabu7-747/+792
The mlx5 device driver documentation page has grown in size and should be split into multiple subpages. This change also contains a table of contents for these new subpages. Signed-off-by: Rahul Rameshbabu <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
net/core/gro.c 7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO") b1a78b9b9886 ("net: add support for ipv4 big tcp") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-01neighbor: fix proxy_delay usage when it is zeroBrian Haley1-0/+8
When set to zero, the neighbor sysctl proxy_delay value does not cause an immediate reply for ARP/ND requests as expected, it instead causes a random delay between [0, U32_MAX). Looking at this comment from __get_random_u32_below() explains the reason: /* * This function is technically undefined for ceil == 0, and in fact * for the non-underscored constant version in the header, we build bug * on that. But for the non-constant case, it's convenient to have that * evaluate to being a straight call to get_random_u32(), so that * get_random_u32_inclusive() can work over its whole range without * undefined behavior. */ Added helper function that does not call get_random_u32_below() if proxy_delay is zero and just uses the current value of jiffies instead, causing pneigh_enqueue() to respond immediately. Also added definition of proxy_delay to ip-sysctl.txt since it was missing. Signed-off-by: Brian Haley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-31docs: ftrace: always use canonical ftrace pathRoss Zwisler1-46/+46
The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing Many parts of Documentation still reference this older debugfs path, so let's update them to avoid confusion. Signed-off-by: Ross Zwisler <[email protected]> Reviewed-by: Steven Rostedt (Google) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jonathan Corbet <[email protected]>
2023-01-31Documentation: networking: correct spellingRandy Dunlap35-49/+49
Correct spelling problems for Documentation/networking/ as reported by codespell. Signed-off-by: Randy Dunlap <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: [email protected] Cc: Jiri Pirko <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-01-30Merge tag 'batadv-next-pullrequest-20230127' of ↵David S. Miller1-1/+1
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich - drop prandom.h includes, by Sven Eckelmann - fix mailing list address, by Sven Eckelmann - multicast feature preparation, by Linus Lüssing (2 patches) ==================== Signed-off-by: David S. Miller <[email protected]>
2023-01-28Merge tag 'for-netdev' of ↵Jakub Kicinski2-0/+111
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== bpf-next 2023-01-28 We've added 124 non-merge commits during the last 22 day(s) which contain a total of 124 files changed, 6386 insertions(+), 1827 deletions(-). The main changes are: 1) Implement XDP hints via kfuncs with initial support for RX hash and timestamp metadata kfuncs, from Stanislav Fomichev and Toke Høiland-Jørgensen. Measurements on overhead: https://lore.kernel.org/bpf/[email protected] 2) Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case, from Andrii Nakryiko. 3) Significantly reduce the search time for module symbols by livepatch and BPF, from Jiri Olsa and Zhen Lei. 4) Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals, from David Vernet. 5) Fix several issues in the dynptr processing such as stack slot liveness propagation, missing checks for PTR_TO_STACK variable offset, etc, from Kumar Kartikeya Dwivedi. 6) Various performance improvements, fixes, and introduction of more than just one XDP program to XSK selftests, from Magnus Karlsson. 7) Big batch to BPF samples to reduce deprecated functionality, from Daniel T. Lee. 8) Enable struct_ops programs to be sleepable in verifier, from David Vernet. 9) Reduce pr_warn() noise on BTF mismatches when they are expected under the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien. 10) Describe modulo and division by zero behavior of the BPF runtime in BPF's instruction specification document, from Dave Thaler. 11) Several improvements to libbpf API documentation in libbpf.h, from Grant Seltzer. 12) Improve resolve_btfids header dependencies related to subcmd and add proper support for HOSTCC, from Ian Rogers. 13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room() helper along with BPF selftests, from Ziyang Xuan. 14) Simplify the parsing logic of structure parameters for BPF trampoline in the x86-64 JIT compiler, from Pu Lehui. 15) Get BTF working for kernels with CONFIG_RUST enabled by excluding Rust compilation units with pahole, from Martin Rodriguez Reboredo. 16) Get bpf_setsockopt() working for kTLS on top of TCP sockets, from Kui-Feng Lee. 17) Disable stack protection for BPF objects in bpftool given BPF backends don't support it, from Holger Hoffstätte. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits) selftest/bpf: Make crashes more debuggable in test_progs libbpf: Add documentation to map pinning API functions libbpf: Fix malformed documentation formatting selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket. bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt(). bpf/selftests: Verify struct_ops prog sleepable behavior bpf: Pass const struct bpf_prog * to .check_member libbpf: Support sleepable struct_ops.s section bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable selftests/bpf: Fix vmtest static compilation error tools/resolve_btfids: Alter how HOSTCC is forced tools/resolve_btfids: Install subcmd headers bpf/docs: Document the nocast aliasing behavior of ___init bpf/docs: Document how nested trusted fields may be defined bpf/docs: Document cpumask kfuncs in a new file selftests/bpf: Add selftest suite for cpumask kfuncs selftests/bpf: Add nested trust selftests suite bpf: Enable cpumasks to be queried and used as kptrs bpf: Disallow NULLable pointers for trusted kfuncs ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-8/+4
Conflicts: drivers/net/ethernet/intel/ice/ice_main.c 418e53401e47 ("ice: move devlink port creation/deletion") 643ef23bd9dd ("ice: Introduce local var for readability") https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/[email protected]/ drivers/net/ethernet/engleder/tsnep_main.c 3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues") 25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock") https://lore.kernel.org/all/[email protected]/ net/netfilter/nf_conntrack_proto_sctp.c 13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"") a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths") f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") https://lore.kernel.org/all/[email protected]/ https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-27ice: Fix broken link in ice NAPI docMichal Wilczynski1-1/+1
Current link for NAPI documentation in ice driver doesn't work - it returns 404. Update the link to the working one. Signed-off-by: Michal Wilczynski <[email protected]> Acked-by: Jesse Brandeburg <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-01-26xfrm: extend add state callback to set failure reasonLeon Romanovsky1-1/+1
Almost all validation logic is in the drivers, but they are missing reliable way to convey failure reason to userspace applications. Let's use extack to return this information to users. Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-26xfrm: extend add policy callback to set failure reasonLeon Romanovsky1-1/+1
Almost all validation logic is in the drivers, but they are missing reliable way to convey failure reason to userspace applications. Let's use extack to return this information to users. Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-25docs: networking: Fix bridge documentation URLIvan Vecera1-1/+1
Current documentation URL [1] is no longer valid. [1] https://www.linuxfoundation.org/collaborate/workgroups/networking/bridge Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-24netfilter: conntrack: unify established states for SCTP pathsSriram Yagnaraman1-7/+3
An SCTP endpoint can start an association through a path and tear it down over another one. That means the initial path will not see the shutdown sequence, and the conntrack entry will remain in ESTABLISHED state for 5 days. By merging the HEARTBEAT_ACKED and ESTABLISHED states into one ESTABLISHED state, there remains no difference between a primary or secondary path. The timeout for the merged ESTABLISHED state is set to 210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a path doesn't see the shutdown sequence, it will expire in a reasonable amount of time. With this change in place, there is now more than one state from which we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so handle the setting of ASSURED bit whenever a state change has happened and the new state is ESTABLISHED. Removed the check for dir==REPLY since the transition to ESTABLISHED can happen only in the reply direction. Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Signed-off-by: Sriram Yagnaraman <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2023-01-23ipv6: Document that max_size sysctl is deprecatedJon Maxwell1-0/+3
v4: fix deprecated typo. Document that max_size is deprecated due to: commit af6d10345ca7 ("ipv6: remove max_size check inline with ipv4") Signed-off-by: Jon Maxwell <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-23bpf: Document XDP RX metadataStanislav Fomichev2-0/+111
Document all current use-cases and assumptions. Cc: John Fastabend <[email protected]> Cc: David Ahern <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Willem de Bruijn <[email protected]> Cc: Jesper Dangaard Brouer <[email protected]> Cc: Anatoly Burakov <[email protected]> Cc: Alexander Lobakin <[email protected]> Cc: Magnus Karlsson <[email protected]> Cc: Maryam Tahhan <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: David Vernet <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin KaFai Lau <[email protected]>
2023-01-23docs: ethtool: document ETHTOOL_A_STATS_SRC and ETHTOOL_A_PAUSE_STATS_SRCVladimir Oltean1-0/+18
Two new netlink attributes were added to PAUSE_GET and STATS_GET and their replies. Document them. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-23docs: ethtool-netlink: document interface for MAC Merge layerVladimir Oltean2-0/+90
Show details about the structures passed back and forth related to MAC Merge layer configuration, state and statistics. The rendered htmldocs will be much more verbose due to the kerneldoc references. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-21batman-adv: Fix mailing list addressSven Eckelmann1-1/+1
Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Simon Wunderlich <[email protected]>
2023-01-20ice: use GNSS subsystem instead of TTYArkadiusz Kubalewski1-7/+9
Previously support for GNSS was implemented as a TTY driver, it allowed to access GNSS receiver on /dev/ttyGNSS_<bus><func>. Use generic GNSS subsystem API instead of implementing own TTY driver. The receiver is accessible on /dev/gnss<id>. In case of multiple receivers in the OS, correct device can be found by enumerating either: - /sys/class/net/<eth port>/device/gnss/ - /sys/class/gnss/gnss<id>/device/ Using GNSS subsystem is superior to implementing own TTY driver, as the GNSS subsystem was designed solely for this purpose. It also implements TTY driver but in a common and defined way. From user perspective, there is no difference in communicating with a device, except new path to the device shall be used. The device will provide same information to the userspace as the old one, and can be used in the same way, i.e.: old # gpsmon /dev/ttyGNSS_2100_0 new # gpsmon /dev/gnss0 There is no other impact on userspace tools. User expecting onboard GNSS receiver support is required to enable CONFIG_GNSS=y/m in kernel config. Reviewed-by: Alexander Lobakin <[email protected]> Signed-off-by: Karol Kolacinski <[email protected]> Signed-off-by: Michal Michalik <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-13ethtool: add tx aggregation parametersDaniele Palmas1-0/+17
Add the following ethtool tx aggregation parameters: ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES Maximum size in bytes of a tx aggregated block of frames. ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES Maximum number of frames that can be aggregated into a block. ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS Time in usecs after the first packet arrival in an aggregated block for the block to be sent. Signed-off-by: Daniele Palmas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
drivers/net/usb/r8152.c be53771c87f4 ("r8152: add vendor/device ID pair for Microsoft Devkit") ec51fbd1b8a2 ("r8152: add USB device driver for config selection") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-01-11net/ethtool: add netlink interface for the PLCA RSPiergiorgio Beruto1-0/+138
Add support for configuring the PLCA Reconciliation Sublayer on multi-drop PHYs that support IEEE802.3cg-2019 Clause 148 (e.g., 10BASE-T1S). This patch adds the appropriate netlink interface to ethtool. Signed-off-by: Piergiorgio Beruto <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-06rxrpc: Move call state changes from sendmsg to I/O threadDavid Howells1-2/+2
Move all the call state changes that are made in rxrpc_sendmsg() to the I/O thread. This is a step towards removing the call state lock. This requires the switch to the RXRPC_CALL_CLIENT_AWAIT_REPLY and RXRPC_CALL_SERVER_SEND_REPLY states to be done when the last packet is decanted from ->tx_sendmsg to ->tx_buffer in the I/O thread, not when it is added to ->tx_sendmsg by sendmsg(). Signed-off-by: David Howells <[email protected]> cc: Marc Dionne <[email protected]> cc: [email protected]
Powered by cgit, Gruvboxed by Blaster4385.