aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2024-07-08Merge branch '[email protected]' into ↵Bjorn Andersson1-0/+3
clk-for-6.11 Merge the IPQ9574 interconnect binding through a topic branch, to make it possible to use the constants in the DeviceTree source branch as well.
2024-07-08dt-bindings: clock: qcom: Add AHB clock for SM8150Satya Priya Kakitapalli1-1/+16
SM8150 videocc needs AHB clock, so update the bindings for sm8150 to add the AHB clock. Fixes: df3f61d2cdc9 ("dt-bindings: clock: add SM8150 QCOM video clock bindings") Signed-off-by: Satya Priya Kakitapalli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-08Merge tag 'v6.11-rockchip-dts64-2' of ↵Arnd Bergmann1-0/+5
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt One new board, the pretty interesting Rock 5 ITX, some improvements for the Lunzn Fastrhino R6xS boards, allowing dma on uarts connected to bluetooth modules and an update for the gpu operating points on rk356x. As well as some minor fixes for missing power-dmains and ethernet phy binding adherence. * tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: add ROCK 5 ITX board dt-bindings: arm: rockchip: Add ROCK 5 ITX board arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices arm64: dts: rockchip: Add avdd supplies to hdmi on rock64 arm64: dts: rockchip: fixes PHY reset for Lunzn Fastrhino R68S arm64: dts: rockchip: disable display subsystem for Lunzn Fastrhino R6xS arm64: dts: rockchip: remove unused usb2 nodes for Lunzn Fastrhino R6xS arm64: dts: rockchip: fix pmu_io supply for Lunzn Fastrhino R6xS arm64: dts: rockchip: fix usb regulator for Lunzn Fastrhino R6xS arm64: dts: rockchip: fix regulator name for Lunzn Fastrhino R6xS arm64: dts: rockchip: Add dma-names to uart1 on quartz64-b arm64: dts: rockchip: Update GPU OPP voltages in RK356x SoC dtsi arm64: dts: rockchip: Add GPU OPP voltage ranges to RK356x SoC dtsi arm64: dts: rockchip: Drop ethernet-phy-ieee802.3-c22 from PHY compatible string on all RK3588 boards arm64: dts: rockchip: Add missing power-domains for rk356x vop_mmu Link: https://lore.kernel.org/r/1998182.CrzyxZ31qj@diego Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08ASoC: dt-bindings: update fsl-asoc-card bindings after imx-spdif mergeElinor Montmasson2-70/+49
The S/PDIF audio card support with compatible "fsl,imx-audio-spdif" was merged from imx-spdif into the fsl-asoc-card driver. It makes possible to use an S/PDIF with an ASRC. This merge introduces new DT bindings to use with compatible "fsl,imx-audio-spdif" to follow the way fsl-asoc-card works: * the "spdif-controller" property from imx-spdif is named "audio-cpu" in fsl-asoc-card. * fsl-asoc-card uses codecs explicitly declared in DT with "audio-codec". With an SPDIF, codec drivers spdif_transmitter and spdif_receiver should be used. Driver imx-spdif used instead the dummy codec and a pair of boolean properties, "spdif-in" and "spdif-out". In an upcoming commit, in-tree DTs will be modified to follow these new properties: * Property "spdif-controller" will be renamed "audio-cpu". * spdif_transmitter and spdif_receiver nodes will be declared and linked to the fsl-asoc-card node with the property "audio-codec". To keep backward compatibility with other DTs, support for "spdif-controller", "spdif-in" and "spdif-out" properties is kept. However, it is recommended to use the new properties if possible. It is better to declare transmitter and/or receiver in DT than using the dummy codec. DTs using compatible "fsl,imx-audio-spdif" are still supported, and fsl-asoc-card will behave the same as imx-spdif for these DTs. Signed-off-by: Elinor Montmasson <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-07-08Merge tag 'riscv-dt-for-v6.11' of ↵Arnd Bergmann3-0/+3
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt RISC-V Devicetrees for v6.11 T-Head: Last change from me before this starts going via Drew's tree is the addition of the SBI PMU events node for the th1520. StarFive: A dts for the Pin64 Star64, another board with a jh7110 SoC. This board is almost identical to the existing Milk-v Mars and VisionFive 2 boards that are already support - just with a different PHY configuration and only one of the two PCIe ports exposed. Additionally, the Mars and VisionFive 2 get their PCie configuration added. Microchip: A dts for the BeagleV Fire. PCIe is disabled on it for now, as some binding and driver changes are required. Signed-off-by: Conor Dooley <[email protected]> * tag 'riscv-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: add PCIe dts configuration for JH7110 riscv: dts: microchip: add an initial devicetree for the BeagleV Fire dt-bindings: riscv: microchip: document beaglev-fire riscv: dts: starfive: Update flash partition layout riscv: dts: thead: th1520: Add PMU event node riscv: dts: starfive: add Star64 board devicetree dt-bindings: riscv: starfive: add Star64 board compatible dt-bindings: riscv: Add T-HEAD C908 compatible Link: https://lore.kernel.org/r/20240707-nuttiness-lustfully-4aaf03c991b2@spud Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08dt-bindings: gpio: vf610: Allow gpio-line-names to be setFrieder Schrempf1-0/+4
Describe common "gpio-line-names" property to allow DTs to specify names for GPIO lines. Signed-off-by: Frieder Schrempf <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]>
2024-07-08Merge tag 'qcom-arm64-for-6.11' of ↵Arnd Bergmann6-3/+114
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm Arm64 DeviceTree updates for v6.11 This introduces 11 new boards, namely: * ASUS Vivobook S 15 * Lenovo Smart Tab M10 DTS * Motorola Moto E 2015 LTE (surnia) * Motorola Moto G 2015 (osprey) * Motorola Moto G4 Play (harpia) * Qualcomm AIM300 AIoT development board * Qualcomm SM8650 Hardware Development Kit (HDK) * SHIFTphone 8 * Samsung Galaxy Z Fold5 * Schneider HMIBSC board DTS * TP-Link Archer AX55 v1 Of particular interest here is the Asus Vivobook, the first supported X1 Elite consumer laptop. For IPQ6018 an SDHCI controller is added and on IPQ9574 an MDIO bus is described. The improvements to MSM8916-based devices continues, with sound and mdoem support added to Acer Iconia Talk S and GPLUS FL8005A, the latter also gaining BMS support. Samsung Galaxy devices gains PMIC and charger definitions, NFC support and MUIC. Accelerometer and magnetometer support is added to the Samsung Galaxy Grand Prime devices. On MSM8976 definitions for IOMMU, the display subsystem, wifi subsystem, and Adreno GPU are added. On MSM8996 UFS core clock frequencies are specified, FastRPC nodes are added for the audio DSP, glink-edges are described where available, the display subsystem reset is added. Venus is introduced on MSM8998 and the "No MSA Ready" quirk is added to allow ath10k to come up. GPU support is added to QCM2290 and enabled on the RB1 development board. The I2C controller used for communicating with the LT9611UXC HDMI bridge is temporarily replaced with i2c-gpio while issues with the builtin controller is diagnosed. The same is done for RB2, on the QRB4210 platform. On RB2 TCPM max current draw is corrected and the vreg_l9a regulator is marked as always on to match expectations. On the QDU1000 platform, USB is added, secure QFPROM is introduced to allow LLCC to access OTP data. USB is enabled on the two IDP boards. SA8775p gains PCIe endpoint definitions, LLCCC support, IMEM and PIL info regions. Nodes are marked as dma-coherent as needed, a dedicated carveout for shared memory bridge allocations is introduced. The SA8775P ride device is split in the two versions r2 and r3. The SC7180 Trogdor clamshell/detachable fragments are refactored for convenience, and pwmleds are disabled where unused. On SC7280 the APR nodes for interfacing with the audio services in audio DSP firmware are introduced. The Qualcomm SMMU TBUs are described, to enable improved debug support. QoS clocks are added to interconnects, as needed in order to operate the QoS settings on some buses. SuperSpeed in park is disabled for the primary DWC3 instance to address host controller issues under load. The PM8008 (camera PMIC) is introduced in Fairphone 5, regulators are named for better output, and firmware name for IPA is adjusted to the preferred file format. The HDMI bridge on Rb3gen2 is described, rtc, gpi-dma and qup nodes are enabled. The Type-C port manager found in PM7250b is enabled, for targets not using pmic-glink firmware for Type-C management. SC8180X gets a number of smaller corrections, and some cleanups - related to both functional issues and DeviceTree validation. The PSHOLD node is marked reserved, after reports that this causes issues during shutdown. Description of the USB signals are updated to match the signal path. The PM8008 camera PMIC is added to Lenovo ThinkPad X13s. The PM660 PMIC is extended with charger and rradc definitions, and the SDM670 gains a SMEM region definition. On SDM845 the Qualcomm SMMU TBU nodes are described, to enable improved debug output during faults etc. The UFS PHY is associated with its GDSC, and the DisplayPort controller is wired up to the QMP PHY. The Lenovo Yoga C630 Embedded Controller is introduced, adding battery and Type-C port management and altmode support. The C630 also gains WiFI calibration variant information, to cause selection of the right data. The missing IPA firmware path is corrected. For the SDX75 platform, AOSS, IPCC, SDHCI, TCSR, modem SMP2P, I2C and SPI nodes are introduced. SD-card support is added to the IDP board. CPUfreq support is introduced for the SM4450 platform. Missing reset is added to the SDHC controller of SM6115. The UFS PHY is associated with its GDSC, so is the PHY on SM6350. On Fairphone 4, the camera pmic (PM8008) is introduced, regulators are named for more informative debug output, and USB role switching is enabled. On the Fairphone 3, vibrator support is added and enabled. On SM8250, the USB signal paths are properly described in the OF graph, the UFS PHY gains its required power-domains description. Thanks to the introduction of PCI power sequence support, the QRB5165 RB5 WiFi chip can now be powered up, so this is added. Touchscreen interrupt flags are corrected accross a number of Sony Xperia devices, to remove the unexpected traces from downstream. On SM8450 an OPP-table is introduced for the PCIe controllers, to specify the bandwidth and performance state requirements for the different genrations and link widths. For this the PCIe controllers also gains interconnect path definitions. The LLCC register layout is corrected, and the UFS PHY is associated with its GDSC. On the SM8550 development boards speaker port mapping is added. WiFi support is finally enabled on the QRD board. The new AIM300 development platform/board is introduced. For SM8650 video and camera clock controller are introduced. SCM node gains details necessary to trigger USB ramdump (download mode) upon a system crash. WiFi support and speaker port mapping is added to the QRD and the newly introduced HDK. On the MTP the USB Type-C connector is describe to be routed to the PHY. In addition to the base HDK, a Display Card overlay is also introduced. For X1 Elite bwmon, fastrpc and GPU support, tsens, and the missing PCIe 6a instance are added. Thermal zones are described. Pmic-glink is introduced for both CRD and QCP devices, and remaining PMICs are described. Audio support is also added to the QCP. An explicit, larger, chunk of CMA memory is added to the various devices, in order to compensate for the lack of IOMMU for PCIe. Across a wide range of platforms, the thermal zone polling delays are removed as supplies are interrupt driven anyways. Also thermal related is the introduction of GPU thermal throttling, across many SoCs. The old SMSM implementation is finally transitioned to using the mailbox-based description and implementation for invoking interrupts on remote processors. As such interrupt-triggering is converted to use this mechanism on related platforms. The usb-role-switch property is removed for all USB instances hard coded to either host or peripheral across a range of boards. * tag 'qcom-arm64-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (279 commits) dt-bindings: arm: qcom: Document samsung,ms013g arm64: dts: qcom: Add device tree for ASUS Vivobook S 15 dt-bindings: arm: qcom: Add ASUS Vivobook S 15 arm64: dts: qcom: qrb4210-rb2: Correct max current draw for VBUS arm64: dts: qcom: msm8998: add venus node arm64: dts: qcom: sa8775p-ride-r3: add new board file arm64: dts: qcom: move common parts for sa8775p-ride variants into a .dtsi dt-bindings: arm: qcom: add sa8775p-ride Rev 3 arm64: dts: qcom: sm8550-qrd: add port mapping to speakers arm64: dts: qcom: sm8550-mtp: add port mapping to speakers arm64: dts: qcom: sm8550-hdk: add port mapping to speakers arm64: dts: qcom: sm8650-qrd: add port mapping to speakers arm64: dts: qcom: sm8650-mtp: add port mapping to speakers arm64: dts: qcom: sm8650-hdk: add port mapping to speakers arm64: dts: qcom: sm7225-fairphone-fp4: Name the regulators arm64: dts: qcom: pm8916: correct thermal zone name arm64: dts: qcom: x1e80100: Add gpu support arm64: dts: qcom: x1e80100: Fix USB HS PHY 0.8V supply arm64: dts: qcom: qcs6490-rb3gen2: enable hdmi bridge arm64: dts: qcom: sm6115: add resets for sdhc_1 ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08Merge tag 'mvebu-dt64-6.11-1' of ↵Arnd Bergmann1-0/+18
https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.11 (part 1) armada-3720: align GPIO keys and LED node namee with bindings Add description for solidrun cn9130 som and clearfog boards * tag 'mvebu-dt64-6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: add description for solidrun cn9132 cex7 module and clearfog board arm64: dts: add description for solidrun cn9131 solidwan board arm64: dts: add description for solidrun cn9130 som and clearfog boards dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation board dt-bindings: arm64: marvell: add solidrun cn9130 som based boards arm64: dts: armada-3720: align LED node name with bindings arm64: dts: armada-3720: align GPIO keys node name with bindings Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08Merge tag 'ti-k3-dt-for-v6.11' of ↵Arnd Bergmann1-0/+6
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.11 Generic Fixups/Cleanups: - main_pktdma reg ranges fixes - dtbs_check warning cleanups with addition of cpsw-mac-efuse node and dropping "syscon", "simple-mfd" compatibles in favor of simple-bus - Disable McASP FIFOs across SoCs for better latency - Add memory node to bootloader stage with bootph-all - Restructure am62p and j722s dtsi for share nodes across these SoCs - DT warning fixes around USB type-C connector node (AM62/AM62P) SoC Specific features and Fixes: AM62 - GPMC and ELM addition AM62A - Enable RTC by default - Crypto accelerator support AM64 and AM65 - PRU system event support AM69/J784S4: - CPSW2G and CPSW9G addition with QSGMII and UXSGMII board support - PCIe, USB, McASP, EHRPWM node additions AM67/J722s - Fix to update GPIO count - Add gpio-ranges definition - McASP support for audio - PCIe, USB, Serdes support Board Specific features and fixes: AM62 - am62x-phyboard-lyra carrier board support - am625-verdin: nau8822 PLL support - sk: CMA node addition - lp-sk: NAND expansion card overlay AM62A - New phyboard-lyra-am62ax from phytec - CMA node addition AM64: - phycore-board: PMIC support - hummingbird-t: RS485 RTS pin polarity update - am6xx-phycore-som: overlays for variants w/o SPI, RTC, ETH PHY or w/ QSPI - EVM: GPMC NAND expansion card overlay - EVM: ICSSG ethernet MII mode overlay support - SK: power supply temp sensors support AM68 - SK: PMIC, OSPI J721e - SK: MCAN Support - Overlay for infotainment expansion board AM69/J784S4 - EVM: PCIe RC/EP, USB3, MCAN support - SK: PMIC support * tag 'ti-k3-dt-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (89 commits) arm64: dts: ti: k3-am62a7-sk: Reserve 576MiB of global CMA arm64: dts: ti: k3-am62x-sk-common: Reserve 128MiB of global CMA arm64: dts: ti: k3-am62x-sk-common: Fix graph_child_address warns arm64: dts: ti: k3-am62p5-sk: fix graph_child_address warnings arm64: dts: ti: k3-j722s: Add gpio-ranges properties arm64: dts: ti: k3-am62p: Add gpio-ranges properties arm64: dts: ti: k3-pinctrl: Define a generic GPIO MUX Mode arm64: dts: ti: k3-am62: Add cpsw-mac-efuse node to wkup_conf arm64: dts: ti: k3-am62a: Add cpsw-mac-efuse node to wkup_conf arm64: dts: ti: k3-j784s4: Add cpsw-mac-efuse node to mcu_conf arm64: dts: ti: k3-j721s2: Add cpsw-mac-efuse node to mcu_conf arm64: dts: ti: k3-j721e: Add cpsw-mac-efuse node to mcu_conf arm64: dts: ti: k3-j7200: Add cpsw-mac-efuse node to mcu_conf arm64: dts: ti: k3-am65: Add cpsw-mac-efuse node to mcu_conf arm: dts: k3-am642-evm-nand: Add bootph-all to NAND related nodes arm64: dts: ti: Add basic support for phyBOARD-Lyra-AM62Ax dt-bindings: arm: ti: Add bindings for PHYTEC AM62Ax based hardware arm64: dts: ti: Add am62x-phyboard-lyra carrier board arm64: dts: ti: k3-am62a: Enable AUDIO_REFCLKx arm64: dts: ti: k3-j784s4-evm: Enable analog audio support ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08Merge tag 'stm32-dt-for-v6.11-1' of ↵Arnd Bergmann1-0/+6
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.11, round 1 Highlights: ---------- -MCU: - Add syscfg missing clock on stm32f429. - MPU: - STM32MP13: - Add camera support on stm32mp135f-dk bord using DCMIPP and GC2145 sensor. - Document PWM output for stm32mp135f-dk - Add goodix touchscreen support on stm32mp135f-dk board. - Add new DH DHCOR / DHSBC board (Som + carrier board) based on STM32MP135F SoC. SOM part contains: STM32MP135F SoC, 512MB DDR2L RAM and eMMC/SDIO wifi module. The carrier boards embedds 2 RGMII ETH ports, USB-A,USB-C and an extansion connector. - Add Ethernet controller support on stm32mp135f-dk. It uses LAN8742A PHY based on RMII. - STMP32MP15: - Rework Octavo OSD32MP1 split for USB phy. - Add OP-TEE IRQ for asynchronous notification support. It allows OP-TEE to trig Linux. - STM32MP25: - Add OP-TEE IRQ for asynchronous notification support. It allows OP-TEE to trig Linux. - Enable firewall for RCC. - Add all U(s)ART nodes for stm32mp25. - Add 3 power domains for low power modes. - Add HPDMA support. - Add Ethernet controller (ETH2) support on stm32mp257f-ev1. It uses Realtek PHY based on RGMII. - Add and enable SCMI regulator support. * tag 'stm32-dt-for-v6.11-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (31 commits) arm64: dts: st: describe power supplies for stm32mp257f-ev1 board arm64: dts: st: add scmi regulators on stm32mp25 regulator: Add STM32MP25 regulator bindings ARM: dts: stm32: omit unused pinctrl groups from stm32mp13 dtb files arm64: dts: st: enable Ethernet2 on stm32mp257f-ev1 board arm64: dts: st: add eth2 pinctrl entries in stm32mp25-pinctrl.dtsi arm64: dts: st: add ethernet1 and ethernet2 support on stm32mp25 arm64: dts: st: add HPDMA nodes on stm32mp251 ARM: dts: stm32: Add ethernet support for DH STM32MP13xx DHCOR DHSBC board ARM: dts: stm32: order stm32mp13-pinctrl nodes ARM: dts: stm32: add ethernet1 for STM32MP135F-DK board ARM: dts: stm32: add ethernet1/2 RMII pins for STM32MP13F-DK board ARM: dts: stm32: add ethernet1 and ethernet2 support on stm32mp13 ARM: dts: stm32: Document output pins for PWMs on stm32mp135f-dk ARM: dts: stm32: OP-TEE async notif interrupt for ST STM32MP15x boards ARM: dts: stm32: Missing clocks for stm32f429's syscfg. ARM: dts: stm32: Add support for STM32MP13xx DHCOR SoM and DHSBC board ARM: dts: stm32: Add pinmux nodes for DH electronics STM32MP13xx DHCOR SoM and DHSBC board dt-bindings: arm: stm32: Add compatible string for DH electronics STM32MP13xx DHCOR DHSBC board ARM: dts: stm32: osd32: move pwr_regulators to common ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08Merge tag 'sunxi-dt-for-6.11' of ↵Arnd Bergmann2-9/+11
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt Allwinner SoC device tree changes for 6.11 This includes a commit shared with the clk tree. This commit adds clock and reset indices to the device tree binding, and thus is needed for both the device tree and driver changes. ARM64 device tree and binding-only changes - Add LRADC (low resolution ADC for resistor network based keys) for H616 SoC - Add cache information for A64, H6, and H616 SoCs - Correct model names and descriptions for Pine64 boards - Add GPADC (general purpose ADC) for H616 SoC - Add ADC joysticks based on GPADC for anbernic-rg35xx-h board - Add additional CPU OPPs for the H700 on top of existing H616 ones - Enable DVFS for rg35xx boards - Add IOMMU for H616 SoC RISC-V device tree changes - Add system LDOs to D1s/T113 SoC - Add ClockworkPi and DevTerm device trees * tag 'sunxi-dt-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: Add ClockworkPi and DevTerm devicetrees riscv: dts: allwinner: d1s-t113: Add system LDOs arm64: dts: allwinner: h616: add IOMMU node arm64: dts: allwinner: rg35xx: Enable DVFS CPU frequency scaling arm64: dts: allwinner: h616: add additional CPU OPPs for the H700 arm64: dts: allwinner: anbernic-rg35xx-h: Add ADC joysticks arm64: dts: allwinner: h616: Add GPADC device node dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks ARM: dts: sunxi: remove duplicated entries in makefile arm64: dts: allwinner: Add cache information to the SoC dtsi for H616 arm64: dts: allwinner: Add cache information to the SoC dtsi for A64 arm64: dts: allwinner: Correct the model names for Pine64 boards dt-bindings: arm: sunxi: Correct the descriptions for Pine64 boards arm64: dts: allwinner: Add cache information to the SoC dtsi for H6 ARM: dts: sun50i: Add LRADC node dt-bindings: input: sun4i-lradc-keys: Add H616 compatible Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08Merge tag 'imx-bindings-6.11' of ↵Arnd Bergmann4-6/+29
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX DT bindings for 6.11: - Add compatible string for various new boards - Drop Li Yang as maintainer for bindings as his email bounces * tag 'imx-bindings-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: fsl: document Kontron SMARC-sAMX6i boards dt-bindings: arm: add MBa8MP-RAS314 SBC dt-bindings: arm: fsl: add i.MX93 9x9 QSB board dt-bindings: arm: fsl: add i.MX95 19x19 EVK board dt-bindings: arm: fsl: Document Compulab IOT-GATE-iMX8 dt-bindings: Drop Li Yang as maintainer for all bindings Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08Merge tag 'dt-cleanup-6.11' of ↵Arnd Bergmann1-0/+9
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM DTS for v6.11 Few cleanups and improvements which were missed by their maintainers: 1. Add Krzysztof as odd-fixer for old ARM platforms: Alphascale, AXM LSI, Moxa, TI Nspire and VT8500 (with Alexey Charkov). 2. VT8500: align node names with bindings (USB, panel timings). 3. Cirrus: align node names with bindings (panel timings). 4. TI Nspire: correct unit addresses, correct watchdog compatible and properties while making it disabled (never tested). 5. Nuvoton, Aspeed: align node names with bindings (I2C). IMPORTANT: At least for Aspeed it is known to affect some user-space tools, because that user-space looks for specific node path via /sys/firmware/devicetree. The /sys/firmware/devicetree is not the ABI and any user-space relying on it: - Prevents any changes in DTS, e.g. node renaming or moving, changing unit addresses (re-arranging child bus addressing). - Is using undocumented interface. - Is neither reliable nor understandable. 6. TI OMAP and Davinci: align node names with bindings (panel timings), drop incorrect property. 7. STI: document in bindings codec child to fix dtbs_checks. * tag 'dt-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: ARM: dts: omap am5729-beagleboneai: drop unneeded ti,enable-id-detection dt-bindings: soc: sti: st,sti-syscon: document codec node ARM: dts: ti: align panel timings node name with dtschema arm: dts: aspeed: Use standard 'i2c' bus node name arm: dts: nuvoton: Use standard 'i2c' bus node name MAINTAINERS: ARM: alphascale: add Krzysztof Kozlowski as maintainer ARM: dts: nspire: Add full compatible for watchdog node ARM: dts: nspire: Add unit name addresses to memory nodes MAINTAINERS: ARM: nspire: add Krzysztof Kozlowski as maintainer MAINTAINERS: ARM: vt8500: add Alexey and Krzysztof as maintainers MAINTAINERS: ARM: axm: add Krzysztof Kozlowski as maintainer MAINTAINERS: ARM: moxa: add Krzysztof Kozlowski as maintainer ARM: dts: cirrus: align panel timings node name with dtschema ARM: dts: vt8500: align panel timings node name with dtschema ARM: dts: vt8500: replace "uhci" nodename with generic name "usb" Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08dt-bindings: arm: rockchip: Add ROCK 5 ITX boardHeiko Stuebner1-0/+5
Add devicetree binding for the ROCK 5 ITX board, built around the rk3588. Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-07-08Merge tag 'dt64-cleanup-6.11' of ↵Arnd Bergmann1-0/+46
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt Minor improvements in ARM64 DTS for v6.11 Few cleanups and improvements which were missed by their maintainers: 1. Spreadtrum: correct PMU nodes - split per clusters. 2. HiSilicon: add dedicated compatible to syscon node ("syscon" alone is not allowed). 3. APM: add dedicated compatible to syscon node (binding applied to MFD tree). * tag 'dt64-cleanup-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: arm64: dts: apm: Add dedicated syscon poweroff compatibles arm64: dts: hisilicon: hi3660: add dedicated hi3660-usb3-otg-bc compatible dt-bindings: soc: hisilicon: document hi3660-usb3-otg-bc arm64: dts: sprd: Split PMU nodes for heterogeneous CPUs Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08Merge tag 'qcom-drivers-fixes-for-6.10' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm driver fixes for v6.10 UCSI support is disabled on SC8280XP while being debugged, as it's causing the system to crash. A recent LLCC QDU1000 binding change is reverted, to allow expressing the LLCC memory regions. * tag 'qcom-drivers-fixes-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries" soc: qcom: pmic_glink: disable UCSI on sc8280xp Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08spi: dt-bindings: fsl-dspi: add compatible string 'fsl,lx2160a-dspi'Frank Li1-0/+3
Add compatible string 'fsl,lx2160a-dspi' and allow fall back to 'fsl,ls2085a-dspi'. Fix below CHECK_DTBS warning. arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb: spi@2100000: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,lx2160a-dspi', 'fsl,ls2085a-dspi'] is too long Signed-off-by: Frank Li <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-07-08spi: dt-bindings: fsl-dspi: add dmas and dma-names propertiesFrank Li1-0/+10
Add dmas and dma-names properties because dspi support dma transfer. Fix below warnings: arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb: spi@2120000: Unevaluated properties are not allowed ('dma-names', 'dmas', 'little-endian' were unexpected) from schema $id: http://devicetree.org/schemas/spi/fsl,dspi.yaml# Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Frank Li <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-07-08regulator: dt-bindings: pca9450: Make interrupt optionalFrieder Schrempf1-1/+0
The interrupt is optional in hardware and not connected on some boards. Make it optional in the binding. Signed-off-by: Frieder Schrempf <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-07-06dt-bindings: arm: qcom: Add msm8916 based LG devicesNikita Travkin1-0/+2
Add compatible values for the msm8916 based LG smartphones. Signed-off-by: Nikita Travkin <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06Merge branch '[email protected]' into ↵Bjorn Andersson1-0/+3
arm64-for-6.11 Merge IPQ9574 interconnect clock DeviceTree binding to gain access to the interconnect constants.
2024-07-06dt-bindings: interconnect: Add Qualcomm IPQ9574 supportVaradarajan Narayanan1-0/+3
Add interconnect-cells to clock provider so that it can be used as icc provider. Add master/slave ids for Qualcomm IPQ9574 Network-On-Chip interfaces. This will be used by the gcc-ipq9574 driver that will for providing interconnect services using the icc-clk framework. Acked-by: Georgi Djakov <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Varadarajan Narayanan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06dt-bindings: arm: qcom: Add Lenovo Yoga Slim 7xSrinivas Kandagatla1-0/+1
Document the x1e80100 based Lenovo Yoga Slim 7x laptop. Signed-off-by: Srinivas Kandagatla <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bjorn Andersson <[email protected]>
2024-07-06dt-bindings: crypto: sun8i-ce: Add compatible for H616Andre Przywara1-0/+2
The Allwinner H616 has a crypto engine very similar to the one in the H6, although all addresses in the DMA descriptors are shifted by 2 bits, to accommodate for the larger physical address space. That makes it incompatible to the H6 variant, and thus requires a new compatible string. Clock wise it relies on the internal oscillator for the TRNG, so needs all four possible clocks specified. Add the compatible string to the list of recognised names, and add the H616 to list of devices requiring all four clocks. Signed-off-by: Andre Przywara <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Acked-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2024-07-05dt-bindings: pwm: describe the cells in #pwm-cells in pwm.yamlConor Dooley1-2/+4
When commit 89650a1e3b6f ("dt-bindings: pwm: Convert PWM bindings to json-schema") converted the pwm provider section of the text binding to dt-schema it also updated all references to pwm.txt in pwm provider bindings to pwm.yaml. Most pwm provider bindings had a reference to pwm.txt as it contains a description of what the cells in #pwm-cells are, albeit in the consumer section of the document. Only information in the provider section of the document was moved to the yaml binding, and it contains no information about the cell format, making all references to it for the cell format unhelpful. Fixes: 89650a1e3b6f ("dt-bindings: pwm: Convert PWM bindings to json-schema") Signed-off-by: Conor Dooley <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/20240517-patient-stingily-30611f73e792@spud Signed-off-by: Uwe Kleine-König <[email protected]>
2024-07-05dt-bindings: arm64: marvell: add solidrun cn9132 CEX-7 evaluation boardJosua Mayer1-0/+8
Add bindings for the SolidRun CN9132 COM-Express Type 7 evaluation board. The CEX is based on CN9130 SoC and includes two southbridges. Because CN9132 and 9131 are just names for different designs around the same SoC, no soc compatibles beside marvell,cn9130 are needed. Signed-off-by: Josua Mayer <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2024-07-05dt-bindings: arm64: marvell: add solidrun cn9130 som based boardsJosua Mayer1-0/+10
Add bindings for SolidRun boards based on CN9130 SoM. Three boards are added in total: - Clearfog Base - Clearfog Pro - SolidWAN The Clearfog boards are identical to the older Armada 388 based boards, upgraded with a new SoM and SoC. However the feature set and performance characteristics are different, therefore compatible strings from armada 388 versions are not included. SolidWAN uses the same SoM adding a southbridge on the carrier. Since 2019 there are bindings in-tree for two boards based on cn9130 and 9131. These are extremely verbose by listing cn9132, cn9131, cn9130, ap807-quad, ap807 for the SoC alone. CN9130 SoC combines an application processor (ap807) and a communication processor (cp115) in a single package. The communication processor (short CP) is also available separately as a southbridge. It only functions in combination with the CN9130 SoC. Complete systems adding one or two southbridges are by convention called CN9131 and CN9132 respectively. Despite different naming all systems are built around the same SoC. Therefore marvell,cn9131 and marvell,cn9132 can be omitted. The number of CPs is part of a board's BoM and can be reflected in the board compatible string instead. Existing bindings also describe cn9130 as a specialisation of ap807-quad. Usually board-level compatibles stop at the SoC without going into silicon versions or individual dies. There is no programming model at this layer, and in particular not for parts of an SoC. Therefore the ap compatibles can also be omitted. Signed-off-by: Josua Mayer <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Gregory CLEMENT <[email protected]>
2024-07-05dt-bindings: regulator: sprd,sc2731-regulator: convert to YAMLStanislav Jakubek2-43/+67
Convert the Spreadtrum SC2731 regulator bindings to DT schema. Change during conversion: - switch compatible from sprd,sc27xx-regulator to sprd,sc2731-regulator, same as the only in-tree user has done back in 2019 [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/arch/arm64/boot/dts/sprd/sc2731.dtsi?h=v6.9&id=0419a75b1808dda225b17ba1509f195f23c0db88 Signed-off-by: Stanislav Jakubek <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/ZobxoobZvA8k3pyi@standask-GA-A55M-S2HP Signed-off-by: Mark Brown <[email protected]>
2024-07-05Merge tag 'drm-msm-next-2024-07-04' of ↵Daniel Vetter8-4/+650
https://gitlab.freedesktop.org/drm/msm into drm-next Updates for v6.11 Core: - SM7150 support DPU: - SM7150 support - Fix DSC support for DSI panels in video mode - Fixed TE vsync source support for DSI command-mode panels - Fix for devices without UBWC in the display controller (ie. QCM2290) DSI: - Remove unused register-writing wrappers - Fix DSC support for panels in video mode - Add support for parsing TE vsync source - Add support for MSM8937 (28nm DSI PHY) MDP5: - Add support for MSM8937 - Fix configuration for MSM8953 GPU: - Split giant device table into per-gen "hw catalog" similar to what is done on the display side of the driver - Fix a702 UBWC mode - Fix unused variably warnings - GPU memory traces - Add param for userspace to know if raytracing is supported - Memory barrier cleanup and GBIF unhalt fix - X185 support (aka gpu in X1 laptop chips) - a505 support - fixes Signed-off-by: Daniel Vetter <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvZQpYEHpSCgXGJ2kaHJDK6QFAFfTsfiWm4b2zZOnjXGw@mail.gmail.com
2024-07-05Merge tag 'drm-misc-next-2024-07-04' of ↵Daniel Vetter3-0/+122
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for $kernel-version: UAPI Changes: Cross-subsystem Changes: Core Changes: - dp/mst: Fix daisy-chaining at resume - dsc: Add helper to dump the DSC configuration - tests: Add tests for the new monochrome TV mode variant Driver Changes: - ast: Refactor the mode setting code - panfrost: Fix devfreq job reporting - stm: Add LDVS support, DSI PHY updates - panels: - New panel: AUO G104STN01, K&d kd101ne3-40ti, Signed-off-by: Daniel Vetter <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20240704-curvy-outstanding-lizard-bcea78@houat
2024-07-05Merge tag 'mediatek-drm-next-6.11' of ↵Daniel Vetter9-0/+14
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 6.11 1. Convert to platform remove callback returning void 2. Drop chain_mode_fixup call in mode_valid() 3. Fixes the errors of MediaTek display driver found by IGT. 4. Add display support for the MT8365-EVK board 5. Fix bit depth overwritten for mtk_ovl_set bit_depth() 6. Remove less-than-zero comparison of an unsigned value 7. Call drm_atomic_helper_shutdown() at shutdown time 8. Log errors in probe with dev_err_probe() 9. Fix possible_crtcs calculation 10. Fix spurious kfree() Signed-off-by: Daniel Vetter <[email protected]> From: Chun-Kuang Hu <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-05Merge v6.10-rc6 into drm-nextDaniel Vetter7-9/+6
The exynos-next pull is based on a newer -rc than drm-next. hence backmerge first to make sure the unrelated conflicts we accumulated don't end up randomly in the exynos merge pull, but are separated out. Conflicts are all benign: Adjacent changes in amdgpu and fbdev-dma code, and cherry-pick conflict in xe. Signed-off-by: Daniel Vetter <[email protected]>
2024-07-05dt-bindings: net: Add Synopsys DW xPCS bindingsSerge Semin1-0/+136
Synopsys DesignWare XPCS IP-core is a Physical Coding Sublayer (PCS) layer providing an interface between the Media Access Control (MAC) and Physical Medium Attachment Sublayer (PMA) through a Media independent interface. From software point of view it exposes IEEE std. Clause 45 CSR space and can be accessible either by MDIO or MCI/APB3 bus interfaces. In the former case the PCS device is supposed to be defined under the respective MDIO bus DT-node. In the later case the DW xPCS will be just a normal IO memory-mapped device. Besides of that DW XPCS DT-nodes can have an interrupt signal and clock source properties specified. The former one indicates the Clause 73/37 auto-negotiation events like: negotiation page received, AN is completed or incompatible link partner. The clock DT-properties can describe up to three clock sources: peripheral bus clock source, internal reference clock and the externally connected reference clock. Finally the DW XPCS IP-core can be optionally synthesized with a vendor-specific interface connected to the Synopsys PMA (also called DesignWare Consumer/Enterprise PHY). Alas that isn't auto-detectable in a portable way. So if the DW XPCS device has the respective PMA attached then it should be reflected in the DT-node compatible string so the driver would be aware of the PMA-specific device capabilities (mainly connected with CSRs available for the fine-tunings). Signed-off-by: Serge Semin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-07-05dt-bindings: nvmem: mediatek: efuse: add support for MT7988Rafał Miłecki1-0/+1
Add compatible for MT7988 SoC. Signed-off-by: Rafał Miłecki <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-05dt-bindings: nvmem: amlogic,meson-gx-efuse: add optional power-domainsNeil Armstrong1-0/+3
On newer SoCs, the eFuse hardware can require a power-domain to operate, add it as optional. Signed-off-by: Neil Armstrong <[email protected]> Acked-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-05dt-bindings: nvmem: mediatek: efuse: add support for MT7981Rafał Miłecki1-0/+1
Add compatible for MT7981 SoC. Signed-off-by: Rafał Miłecki <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-07-04dt-bindings: net: Define properties at top-levelRob Herring (Arm)2-43/+52
Convention is DT schemas should define all properties at the top-level and not inside of if/then schemas. That minimizes the if/then schemas and is more future proof. Signed-off-by: Rob Herring (Arm) <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Serge Semin <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-07-04Merge branch 'icc-rpmh-qos' into icc-nextGeorgi Djakov1-0/+53
This series adds QoS support for QNOC type device which can be found on SC7280 platform. It adds support for programming priority, priority forward disable and urgency forwarding. This helps in priortizing the traffic originating from different interconnect masters at NOC (Network On Chip). * icc-rpmh-qos dt-bindings: interconnect: add clock property to enable QOS on SC7280 interconnect: qcom: icc-rpmh: Add QoS configuration support interconnect: qcom: sc7280: enable QoS configuration interconnect: qcom: Fix DT backwards compatibility for QoS Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]>
2024-07-04Merge branch 'icc-msm8953' into icc-nextGeorgi Djakov1-0/+101
Add interconnect driver for MSM8953-based devices. * icc-msm8953 dt-bindings: interconnect: qcom: Add Qualcomm MSM8953 NoC interconnect: qcom: Add MSM8953 driver Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]>
2024-07-04dt-bindings: mfd: syscon: Add APM poweroff mailboxKrzysztof Kozlowski1-0/+4
Add compatible for an already used syscon poweroff/mailbox block in APM. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/20240627-dt-bindings-mfd-syscon-split-v4-7-dc6699a9f3e4@linaro.org Signed-off-by: Lee Jones <[email protected]>
2024-07-04dt-bindings: mfd: syscon: Split and enforce documenting MFD childrenKrzysztof Kozlowski2-116/+252
Simple syscon nodes can be documented in common syscon.yaml, however devices with simple-mfd compatible, thus with some children, should have their own schema listing these children. Such listing makes the binding specific, allows better validation (so the incorrect child would not appear in the simple-mfd node) and actually enforces repeated rule for simple-mfd devices: "simple-mfd" is only for simple devices, where the children do not depend on the parent. Currently the syscon+simple-mfd binding is quite broad and allows any child or property, thus above rule cannot be enforced. Split the syscon.yaml binding into: 1. Common syscon properties, used potentially by many bindings. 2. Simple syscon devices (NO simple-mfd!). Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Link: https://lore.kernel.org/r/20240627-dt-bindings-mfd-syscon-split-v4-6-dc6699a9f3e4@linaro.org Signed-off-by: Lee Jones <[email protected]>
2024-07-04dt-bindings: mfd: rk817: Merge support for RK809Cristian Ciocaltea2-298/+27
The Rockchip RK809 PMIC is compatible with RK817 and provides the same capabilities, except for the battery charger manager. There are also minor regulator related differences: BOOST and OTG_SWITCH are specific to RK817, while DCDC_REG5, SWITCH_REG1 and SWITCH_REG2 are provided RK809. The current binding for RK809 doesn't document the audio codec properties, although it has been already in use by several boards: rk3566-quartz64-b, k3566-roc-pc, rk3568-evb1-v10, rk3568-lubancat-2, rk3568-odroid-m1, rk3568-rock-3a. Therefore dtbs_check fails for all of them: DTC_CHK arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dtb rk3568-rock-3a.dtb: pmic@20: '#sound-dai-cells', 'assigned-clock-parents', 'assigned-clocks', 'clock-names', 'clocks', 'codec' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/rockchip,rk809.yaml# Additionally, the example in rockchip,rk809 binding is not able to actually test the schema since it uses a wrong compatible 'rockchip,rk808' instead of the expected 'rockchip,rk809'. Instead of duplicating even more content, merge the RK809 support into the more inclusive RK817 schema and drop the now obsolete rockchip,rk809 related file. Fixes: 6c38ca03406e ("dt-bindings: mfd: rk808: Convert bindings to yaml") Signed-off-by: Cristian Ciocaltea <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-07-04dt-bindings: mfd: rk817: Fixup clocks and reference dai-commonCristian Ciocaltea1-22/+11
Ensure 'clocks' property does not allow more than one item and add the missing reference to dai-common schema. While at it, move 'clocks*' and '#sound-dai-cells' properties to keep the list ordered alphabetically. Additionally, drop all useless/redundant descriptions. Fixes: 6c38ca03406e ("dt-bindings: mfd: rk808: Convert bindings to yaml") Signed-off-by: Cristian Ciocaltea <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-07-04dt-bindings: mfd: syscon: Add TI's opp table compatibleBryan Brattlof1-0/+1
The JTAG_USER_ID_USERCODE efuse address, which is located inside the WKUP_CTRL_MMR0 range holds information to identify the speed grades of various components on TI's K3 SoCs. Add a compatible to allow the cpufreq driver to obtain the data to limit the maximum frequency for the CPUs under Linux control. Signed-off-by: Bryan Brattlof <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-07-04dt-bindings: mfd: Explain lack of child dependency in simple-mfdKrzysztof Kozlowski1-7/+8
Common mistake of usage of 'simple-mfd' compatible is a dependency of children on resources acquired and managed by the parent, e.g. clocks. Extend the simple-mfd documentation to cover this case. Cc: Linus Walleij <[email protected]> Cc: Arnd Bergmann <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-07-04dt-bindings: mfd: syscon: Add more simple compatiblesRob Herring (Arm)15-221/+29
Add another batch of various "simple" syscon compatibles which were undocumented or still documented with old text bindings. Remove the old text binding docs for the ones which were documented. Acked-by: Conor Dooley <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Acked-by: Stephen Boyd <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Miquel Raynal <[email protected]> # mtd Signed-off-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-07-04dt-bindings: mfd: qcom,spmi-pmic: Document PMC8380Konrad Dybcio1-0/+1
These are just some more PMICs adjacent to X1 SoCs. Document them. Signed-off-by: Konrad Dybcio <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-07-04dt-bindings: mfd: qcom-spmi-pmic: Document SMB2360 PMICAbel Vesa1-0/+1
Add bindings for SMB2360 PMIC. This PMIC is found in boards like X1 Elite CRD and QCP. Signed-off-by: Abel Vesa <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/20240527-smb2360-bindings-mfd-qcom-spmi-pmic-v1-1-31a2c051529c@linaro.org Signed-off-by: Lee Jones <[email protected]>
2024-07-04dt-bindings: mfd: mediatek,mt8195-scpsys: Add mediatek,mt8365-scpsysKrzysztof Kozlowski1-0/+1
Add a new mediatek,mt8365-scpsys compatible, for the SCPSYS syscon block having power controller. Previously the DTS was re-using SYSCFG compatible, but that does not seem right, because SYSCFG does not have children. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Alexandre Mergnat <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Acked-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
2024-07-04dt-bindings: mfd: mediatek,mt8195-scpsys: Add support for MT8188AngeloGioacchino Del Regno1-0/+1
Add a compatible string for the scpsys block found in the MediaTek MT8188 SoC. Signed-off-by: AngeloGioacchino Del Regno <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lee Jones <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.