| Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix a possible (but unlikely) out-of-bounds read in interrupts
parsing code
- Add AT25 EEPROM "fujitsu,mb85rs256" compatible
- Update Konrad Dybcio's email
* tag 'devicetree-fixes-for-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Prevent device address out-of-bounds read in interrupt map walk
dt-bindings: eeprom: at25: add fujitsu,mb85rs256 compatible
dt-bindings: Batch-update Konrad Dybcio's email
|
|
Add microchip,pme-active-high property to set the PME (Power
Management Event) pin polarity for Wake on Lan interrupts.
Note that the polarity is active-low by default.
Signed-off-by: Pieter Van Trappen <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Document the "netdev" trigger which is used to control LEDs by
network device activity. This is an existing trigger used in
existing DTs, document it so validation of those DTs would pass.
Signed-off-by: Marek Vasut <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu and xe. The larger amdgpu fix is for a
new IP block introduced in rc1, so should be fine. The xe fixes
contain some missed fixes from the end of the previous round along
with some fixes which required precursor changes, but otherwise
everything seems fine,
mediatek:
- fix cursor crash
amdgpu:
- Fix MES ring buffer overflow
- DCN 3.5 fix
- DCN 3.2.1 fix
- DP MST fix
- Cursor fixes
- JPEG fixes
- Context ops validation
- MES 12 fixes
- VCN 5.0 fix
- HDP fix
panel:
- dt bindings style fix
- orientation quirks
rockchip:
- inno-hdmi: fix infoframe upload
v3d:
- fix OOB access in v3d_csd_job_run()
xe:
- Validate user fence during creation
- Fix use after free when client stats are captured
- SRIOV fixes
- Runtime PM fixes"
* tag 'drm-fixes-2024-08-16' of https://gitlab.freedesktop.org/drm/kernel: (37 commits)
drm/xe: Hold a PM ref when GT TLB invalidations are inflight
drm/xe: Drop xe_gt_tlb_invalidation_wait
drm/xe: Add xe_gt_tlb_invalidation_fence_init helper
drm/xe/pf: Fix VF config validation on multi-GT platforms
drm/xe: Build PM into GuC CT layer
drm/xe/vf: Fix register value lookup
drm/xe: Fix use after free when client stats are captured
drm/xe: Take a ref to xe file when user creates a VM
drm/xe: Add ref counting for xe_file
drm/xe: Move part of xe_file cleanup to a helper
drm/xe: Validate user fence during creation
drm/rockchip: inno-hdmi: Fix infoframe upload
drm/amd/amdgpu: add HDP_SD support on gc 12.0.0/1
drm/amdgpu: Update kmd_fw_shared for VCN5
drm/amd/amdgpu: command submission parser for JPEG
drm/amdgpu/mes12: fix suspend issue
drm/amdgpu/mes12: sw/hw fini for unified mes
drm/amdgpu/mes12: configure two pipes hardware resources
drm/amdgpu/mes12: adjust mes12 sw/hw init for multiple pipes
drm/amdgpu/mes12: add mes pipe switch support
...
|
|
we seems to have ended up with duplicate clocks for frame-sync on sm8250,
it has both va and fsgen which are exactly same things. Remove the redundant
va clock and make it align with other SoCs.
Codec driver does not even handle va clock, so remove this from the
bindings and examples to avoid any confusion.
Signed-off-by: Srinivas Kandagatla <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
panel:
- dt-bindings style fixes
panel-orientation:
- add quirk for Any Loki Max
- add quirk for Any Loki Zero
rockchip:
- inno-hdmi: fix infoframe upload
v3d:
- fix OOB access in v3d_csd_job_run()
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
c25504a0ba36 ("dt-bindings: net: fsl,qoriq-mc-dpmac: add missed property phys")
be034ee6c33d ("dt-bindings: net: fsl,qoriq-mc-dpmac: using unevaluatedProperties")
https://lore.kernel.org/[email protected]
drivers/net/dsa/vitesse-vsc73xx-core.c
5b9eebc2c7a5 ("net: dsa: vsc73xx: pass value in phy_write operation")
fa63c6434b6f ("net: dsa: vsc73xx: check busy flag in MDIO operations")
2524d6c28bdc ("net: dsa: vsc73xx: use defined values in phy operations")
https://lore.kernel.org/[email protected]
Resolve by using FIELD_PREP(), Stephen's resolution is simpler.
Adjacent changes:
net/vmw_vsock/af_vsock.c
69139d2919dd ("vsock: fix recursive ->recvmsg calls")
744500d81f81 ("vsock: add support for SIOCOUTQ ioctl")
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
arm64-for-6.12
Merge IPQ5332 interconnect binding from the topic branch, to gain access
to the interconnect path defines.
|
|
Unlike MSM SoC, IPQ SoC doesn't use RPM to aggregate bandwidth
requests and scale the NoC frequency. The NoCs are turned on and
set to a specific frequency at boot time and that is used for the
lifetime of the system. Hence interconnect was not considered
previously.
The same approach was used for PCIe and at that point the
consensus was to move to interconnect. Hence implemented the ICC
driver and updating the existing USB driver to use the ICC
driver.
USB uses icc-clk framework to enable the NoC interface clock.
Hence the 'iface' clock is removed from the list of clocks.
Update the clock-names list accordingly.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
clk-for-6.12
Merge IPQ5332 interconnect binding additions through topic branchs to
allow making the constants available in DeviceTree branch as well.
|
|
Add interconnect-cells to clock provider so that it can be
used as icc provider.
Add master/slave ids for Qualcomm IPQ5332 Network-On-Chip
interfaces. This will be used by the gcc-ipq5332 driver
for providing interconnect services using the icc-clk
framework.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
The SM7325 is the closest SoC to the QCM6490 and is also identical
to the SC7280. The SM7325 also requires both UCSI_NO_PARTNER_PDOS &
UCSI_DELAY_DEVICE_PDOS quirks.
Document the PMIC GLINK firmware interface on the SM7325 Platform
by using the QCM6490 bindings as fallback.
Signed-off-by: Danila Tikhonov <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
On SM8650, the minimum voltage corner supported on MMCX from cmd-db is
sufficient for clock controllers to operate and there is no need to specify
the required-opps. Hence remove the required-opps property from the list of
required properties for SM8650 camcc bindings.
This fixes:
arch/arm64/boot/dts/qcom/sm8650-hdk.dtb: clock-controller@ade0000:
'required-opps' is a required property
arch/arm64/boot/dts/qcom/sm8650-mtp.dtb: clock-controller@ade0000:
'required-opps' is a required property
arch/arm64/boot/dts/qcom/sm8650-qrd.dtb: clock-controller@ade0000:
'required-opps' is a required property
Fixes: 1ae3f0578e0e ("dt-bindings: clock: qcom: Add SM8650 camera clock controller")
Reported-by: Vladimir Zapolskiy <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Jagadeesh Kona <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Vladimir Zapolskiy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
On SM8650, the minimum voltage corner supported on MMCX from cmd-db is
sufficient for clock controllers to operate and there is no need to specify
the required-opps. Hence remove the required-opps property from the list of
required properties for SM8650 videocc bindings.
This fixes:
arch/arm64/boot/dts/qcom/sm8650-hdk.dtb: clock-controller@aaf0000:
'required-opps' is a required property
arch/arm64/boot/dts/qcom/sm8650-mtp.dtb: clock-controller@aaf0000:
'required-opps' is a required property
arch/arm64/boot/dts/qcom/sm8650-qrd.dtb: clock-controller@aaf0000:
'required-opps' is a required property
Fixes: a6a61b9701d1 ("dt-bindings: clock: qcom: Add SM8650 video clock controller")
Reported-by: Vladimir Zapolskiy <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Jagadeesh Kona <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Vladimir Zapolskiy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Convert the bindings for the Turing Clock Controller on QCS404 from
the old text format to yaml.
Signed-off-by: Rayyan Ansari <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
X1E80100 LPASS (Low Power Audio Subsystem) clock controller provides reset
support when it is under the control of Q6DSP.
Add x1e80100 compatible to the existing sc8280xp as these reset
controllers have same reg layout and compatible.
Signed-off-by: Srinivas Kandagatla <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
X1E80100 LPASS (Low Power Audio Subsystem) Audio clock controller
provides reset support when it is under the control of Q6DSP.
Add x1e80100 compatible to the existing sc8280xp as these reset
controllers have same reg layout and compatible.
Signed-off-by: Srinivas Kandagatla <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Add the compatible for the A7PLL found in MSM8226 SoCs.
Signed-off-by: Luca Weiss <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Allow placing an opp-table as a subnode that can be assigned using
operating-points-v2 to specify the frequency table for the PLL.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless and netfilter
Current release - regressions:
- udp: fall back to software USO if IPv6 extension headers are
present
- wifi: iwlwifi: correctly lookup DMA address in SG table
Current release - new code bugs:
- eth: mlx5e: fix queue stats access to non-existing channels splat
Previous releases - regressions:
- eth: mlx5e: take state lock during tx timeout reporter
- eth: mlxbf_gige: disable RX filters until RX path initialized
- eth: igc: fix reset adapter logics when tx mode change
Previous releases - always broken:
- tcp: update window clamping condition
- netfilter:
- nf_queue: drop packets with cloned unconfirmed conntracks
- nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
- vsock: fix recursive ->recvmsg calls
- dsa: vsc73xx: fix MDIO bus access and PHY opera
- eth: gtp: pull network headers in gtp_dev_xmit()
- eth: igc: fix packet still tx after gate close by reducing i226 MAC
retry buffer
- eth: mana: fix RX buf alloc_size alignment and atomic op panic
- eth: hns3: fix a deadlock problem when config TC during resetting"
* tag 'net-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net: hns3: use correct release function during uninitialization
net: hns3: void array out of bound when loop tnl_num
net: hns3: fix a deadlock problem when config TC during resetting
net: hns3: use the user's cfg after reset
net: hns3: fix wrong use of semaphore up
selftests: net: lib: kill PIDs before del netns
pse-core: Conditionally set current limit during PI regulator registration
net: thunder_bgx: Fix netdev structure allocation
net: ethtool: Allow write mechanism of LPL and both LPL and EPL
vsock: fix recursive ->recvmsg calls
selftest: af_unix: Fix kselftest compilation warnings
netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
netfilter: nf_tables: Introduce nf_tables_getobj_single
netfilter: nf_tables: Audit log dump reset after the fact
selftests: netfilter: add test for br_netfilter+conntrack+queue combination
netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
netfilter: flowtable: initialise extack before use
netfilter: nfnetlink: Initialise extack before use in ACKs
netfilter: allow ipv6 fragments to arrive on different devices
tcp: Update window clamping condition
...
|
|
Convert binding doc newwork.txt to yaml format.
HDLC part:
- Convert to "fsl,ucc-hdlc.yaml".
- Add missed reg and interrupt property.
- Update example to pass build.
ethernet part:
- Convert to net/fsl,cpm-enet.yaml
- Add 0x in example, which should be hex value
- Add ref to ethernet-controller.yaml
mdio part:
- Convert to net/fsl,cpm-mdio.yaml
- Add 0x in example, which should be hex value
- Add ref to mdio.yaml
Signed-off-by: Frank Li <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The previous maintainers are no longer working on the Corstone-1000.
- Add new maintainers: Abdellatif El Khlifi, Hugues Kamba Mpiana
- Remove maintainers: Vishnu Banavath, Rui Miguel Silva
- Update contact information for existing maintainers
Signed-off-by: Hugues KAMBA MPIANA <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add the NanoPi R2S Plus variant, which is an R2S with eMMC.
Signed-off-by: Sergey Bostandzhyan <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Add two generic compatibles to all smd-rpm devices, they follow the same
RPMSG protocol and are either accessed through the smd-edge or through
the glink-edge.
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Acked-by: Stephen Boyd <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Document samsung,j3ltetw bindings used in its device tree.
Signed-off-by: Lin, Meng-Bo <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Document the MPSS Peripheral Authentication Service on SDX75 platform.
Signed-off-by: Naina Mehta <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
arm64-for-6.12
Merge the SM4450 display, camera and GPU bindings from a topic branch,
to gain access to the clock defines.
|
|
clk-for-6.12
Merge the SM4450 display, camera and GPU bindings through a topic
branch, to make it possible to merge them into the DeviceTree source
branch as well.
|
|
Add device tree bindings for the graphics clock controller on
Qualcomm SM4450 platform.
Signed-off-by: Ajit Pandey <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Add device tree bindings for the camera clock controller on
Qualcomm SM4450 platform.
Signed-off-by: Ajit Pandey <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Add device tree bindings for the display clock controller on
Qualcomm SM4450 platform.
Signed-off-by: Ajit Pandey <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
PIC64GX SPI/QSPI are compatible with MPFS SPI/QSPI driver, we just use
fallback mechanism
Signed-off-by: Pierre-Henry Moussay <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add support for the swctrl-gpios property which contains the phandle to
the GPIO indicating the clock supply to the BT module.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add description of the PMU of the WCN6855 model.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
bt-enable-gpios
The Bluetooth module is obviously not an ath11k so drop the word.
Fixes: b5cb34c93bd4 ("regulator: dt-bindings: describe the PMU module of the QCA6390 package")
Signed-off-by: Bartosz Golaszewski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
STM32 RTC is capable to handle 3 specific pins of the soc (out1, out2,
out2_rmp) and to outputs 2 signals (LSCO, alarm-a).
This feature is configured thanks to pinmux nodes and pinctrl framework.
This feature is available with compatible st,stm32mp1-rtc and
st,stm32mp25-rtc only.
Signed-off-by: Valentin Caron <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Add the wakeup-source to enable this device as a wakeup source if
defined in DT.
Signed-off-by: Markus Schneider-Pargmann <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Kevin Hilman <[email protected]>
Tested-by: Kevin Hilman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Replace additionalProperties with unevaluatedProperties because it have
allOf: $ref: ethernet-controller.yaml#.
Remove all properties, which already defined in ethernet-controller.yaml.
Fixed below CHECK_DTBS warnings:
arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb:
fsl-mc@80c000000: dpmacs:ethernet@11: 'fixed-link' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/misc/fsl,qoriq-mc.yaml#
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Convert binding doc maxim,ds26522.txt to yaml format.
Additional changes
- Remove spi-max-frequency because ref to
/schemas/spi/spi-peripheral-props.yaml
- Add address-cells and size-cells in example
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/spi@2100000/slic@2: failed to match any schema with compatible: ['maxim,ds26522']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Address warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: interrupt-controller@1e6c0080: 'valid-sources' does not match any of the regexes: 'pinctrl-[0-9]+'
and
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/copro-interrupt-controller@1e6c2000: failed to match any schema with compatible: ['aspeed,ast2400-cvic', 'aspeed-cvic']
Note that the conversion to DT schema causes some further warnings to
be emitted, because the Aspeed devicetrees are not in great shape. These
new warnings are resolved in a separate series:
https://lore.kernel.org/lkml/20240802-dt-warnings-bmc-dts-cleanups-v1-0-1cb1378e5fcd@codeconstruct.com.au/
Signed-off-by: Andrew Jeffery <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20240808-dt-warnings-irq-aspeed-dt-schema-v2-2-c2531e02633d@codeconstruct.com.au
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Squash warnings such as:
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/interrupt-controller@1e6c0080: failed to match any schema with compatible: ['aspeed,ast2400-vic']
The YAML DT schema defines an optional property, valid-sources, which
was not previously described in the prose binding. It is added to
document existing practice in the Aspeed devicetrees. Unfortunately
the property seems to predate the requirement that vendor-specific
properties be prefixed.
Signed-off-by: Andrew Jeffery <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20240808-dt-warnings-irq-aspeed-dt-schema-v2-1-c2531e02633d@codeconstruct.com.au
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert the NXP LPC3220 timer bindings to yaml format.
Add missing resets property as it is already being used in dts.
Cc: Daniel Baluta <[email protected]>
Signed-off-by: Animesh Agarwal <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert the Freescale FlexTimer Module (FTM) Timer bindings to yaml.
Cc: Daniel Baluta <[email protected]>
Signed-off-by: Animesh Agarwal <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert binding doc spi-sc18is602.txt (I2C to SPI bridge) to yaml.
Additional change:
- ref spi-controller.yaml
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb:
/soc/i2c@2000000/i2c-mux@77/i2c@7/i2c-mux@75/i2c@0/spi@28: failed to match any schema with compatible: ['nxp,sc18is602b']
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Convert txt bindings of TI's DaVinci/Keystone Watchdog Timer Controller
to dtschema to allow for validation.
While at it,
- Change the order of the compatibles.
- Add "power-domains" to represent that the power domain maybe managed by
TI-SCI controller if found on the SoC (for example, Keystone based K2G).
w.r.t. to the txt binding to stay in sync with existing DTS.
Signed-off-by: Kousik Sanagavarapu <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert txt binding of TI's DaVinci timer to dtschema to allow for
validation.
While at it, change the file name to match the compatible.
Signed-off-by: Kousik Sanagavarapu <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
"additionalProperties" on child nodes
All nodes need an explicit additionalProperties or unevaluatedProperties
unless a $ref has one that's false. Add missing additionalProperties
to fix dt_binding_check warning:
xlnx,zynqmp-r5fss.yaml: ^r(.*)@[0-9a-f]+$: Missing additionalProperties/unevaluatedProperties constraint
Fixes: 9e1b2a0757d0 ("dt-bindings: remoteproc: Add Tightly Coupled Memory (TCM) bindings")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Tanmay Shah <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
Merge series from Andrei Simion <[email protected]>:
In this series of patches, support for the *-supply property [1] is added
(correlated with supply_name [2]) from the core regulator.
Link [1]: https://github.com/torvalds/linux/blob/master/drivers/regulator/core.c#L471
Link [2]: https://github.com/torvalds/linux/blob/master/drivers/regulator/core.c#L2064
I modified the mcp16502.c driver and the dts that use this PMIC.
We added these improvements to provide a complete description of the board power scheme.
|
|
documentation
Update the yaml schema with info about input supply phandle for
each buck and ldo according with the PMIC MCP16502 Datasheet.
Signed-off-by: Andrei Simion <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Convert the Spreadtrum hardware spinlock bindings to DT schema.
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Baolin Wang <[email protected]>
Signed-off-by: Stanislav Jakubek <[email protected]>
Link: https://lore.kernel.org/r/ZrB2S71BsxGAVXfQ@standask-GA-A55M-S2HP
Signed-off-by: Bjorn Andersson <[email protected]>
|