| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Document dt-bindings for RK3308 IO voltage domains.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Add dt-schema for ExynosAuto v920 SoC clock controller.
Add device tree clock binding definitions for below CMU blocks.
- CMU_TOP
- CMU_PERIC0/1
- CMU_MISC
- CMU_HSI0/1
Signed-off-by: Sunyeal Hong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973df5 ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb754 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add phys properties so Linux can power-on/configure the GTR transceivers
(xlnx,zynqmp-psgtr-v1.1).
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sean Anderson <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
|
|
Additional changes:
- Add ref to common.yaml for child node.
- Add I2C node at example.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: /soc@0/bus@30800000/i2c@30a40000/backlight@36:
failed to match any schema with compatible: ['ti,lm36922']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
An USB hub is not a HCD, but an USB device. Fix the referenced schema
accordingly.
Fixes: bfbf2e4b77e2 ("dt-bindings: usb: Document the Microchip USB2514 hub")
Cc: [email protected]
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add missed binding doc for layerscape dwc3 usb controller.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb: /soc/usb@3100000:
failed to match any schema with compatible: ['fsl,ls1028a-dwc3', 'snps,dwc3']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Commit a170a1e9ccc5 ("usb: phy: remove phy-msm-usb.c") removed the
device driver but left the corresponding documentation, delete it.
Signed-off-by: Masanori Ogino <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The X1E80100, just like its predecessors, has a Multiport controller.
This time around, 2 HS (eUSB) and 2 SS PHYs are attached.
Document it.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Document the new compatibles used on Meta Catalina.
Signed-off-by: Potin Lai <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Andrew Jeffery <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clock-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Fabrice Gasnier <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
K3 AM64x SoC has a Cortex M4F subsystem in the MCU voltage domain.
The remote processor's life cycle management and IPC mechanisms are
similar across the R5F and M4F cores from remote processor driver
point of view. However, there are subtle differences in image loading
and starting the M4F subsystems.
The YAML binding document provides the various node properties to be
configured by the consumers of the M4F subsystem.
Signed-off-by: Martyn Welch <[email protected]>
Signed-off-by: Hari Nagalla <[email protected]>
Signed-off-by: Andrew Davis <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mathieu Poirier <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks.
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clock-names and reset-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for reg, clocks, clock-names, interrupts and interrupt-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Each variable-length property like interrupts must have fixed
constraints on number of items for given variant in binding. The
clauses in "if:then:" block should define both limits: upper and lower.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Convert binding doc tpa6130a2.txt to yaml format.
Additional change:
- add ref to dai-common.yaml
- add i2c node in example
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a20000/amp@60:
failed to match any schema with compatible: ['ti,tpa6130a2']
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Convert the DT binding document for BCM2836 per-CPU interrupt
controller from .txt to YAML.
Signed-off-by: Stefan Wahren <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Florian Fainelli <[email protected]>
|
|
Convert the DT binding document for bcm2835-system-timer from .txt
to YAML.
Signed-off-by: Stefan Wahren <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Florian Fainelli <[email protected]>
|
|
Add new compatible for ao-secure of Amlogic SoCs(S4,C3,T7,A4).
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Xianwei Zhao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Clocks property was present only to allow usage of assigned-clocks in
the sound card node, however in upstream DTS the assigned-clocks were
moved in commit 4afb06afd768 ("ARM: dts: exynos: move assigned-clock*
properties to i2s0 node in Odroid XU4") to respective I2S nodes. Linux
drivers never parsed "clocks" so it can be safely dropped.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
|
|
Define power domain IDs as described in the TRM and add compatible for
rockchip,rk3576-power-controller
Signed-off-by: Finley Xiao <[email protected]>
Co-Developed-by: Detlev Casanova <[email protected]>
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Document two new AST2600 BMC boards for IBM P11 systems.
Signed-off-by: Eddie James <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Andrew Jeffery <[email protected]>
|
|
Reference common serial properties schema (for children of UART
controllers) to bring common definition of "current-speed" and
"max-speed" properties.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-6-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Reference common serial properties schema (for children of UART
controllers) to bring common definition of "current-speed" and
"max-speed" properties.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-5-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The "current-speed" property is not a common property for all GNSS
devices, but only to these connected with serial. Drop the property
from the common GNSS properties schema and instead reference common
serial properties schema (for children of UART controllers).
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-4-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Some Bluetooth devices bindings are in net/ and some are in
net/bluetooth/, so bring some consistency by putting everything in
net/bluetooth. Rename few bindings to match preferred naming
style: "vendor,device".
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-3-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Properties should be defined in only one place, thus add new
serial-peripheral-props.yaml schema with definition of common properties
for UART-connected devices (children of UART controller): current-speed
and max-speed. The schema can be referenced by individual devices using
these properties.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-2-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
All nodes need an explicit additionalProperties or unevaluatedProperties
unless a $ref has one that's false. Add missing additionalProperties
for serial-attached devices.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240811-dt-bindings-serial-peripheral-props-v1-1-1dba258b7492@linaro.org
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert dt-binding archs-pct from txt to yaml format.
Signed-off-by: Aryabhatta Dey <[email protected]>
Link: https://lore.kernel.org/r/emosjjbdwimwevrf2ew2dpn5sdx254el5fanhhquouu4bz6nbe@zqyp5ra7bmhh
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Replace additionalProperties with unevaluatedProperties because it ref to
panel-common.yaml.
Remove properties (backlight, enable-gpios and power-supply), which defined
in panel-common.yaml.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mp-evk-mx8-dlvds-lcd1.dtb: panel-lvds: 'panel-timing' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/panel/panel-simple-lvds-dual-ports.yaml#
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Convert binding doc fsl-board.txt to yaml format. split to 3 part
fsl,bcsr.yaml, fsl,fpga-qixis.yaml, fsl,fpga-qixis-i2c.yaml
Additional change for fsl,fpga-qixis.yaml
- Add childnode mdio-mux-emi*
- Add compatible string fsl,ls1043aqds-fpga, fsl,ls1043ardb-fpga,
fsl,ls1046aqds-fpga, fsl,ls1046ardb-fpga, fsl,ls208xaqds-fpga,
fsl,ls1043ardb-cpld, fsl,ls1046ardb-cpld, fsl,ls1088aqds-fpga,
fsl,ls1088ardb-fpga, fsl,ls2080aqds-fpga, fsl,ls2080ardb-fpga.
- Change address to 32bit in example.
Additional change for fsl,fpga-qixis-i2c.yaml
- Add mux-controller
- Add compatible string fsl,ls1028aqds-fpga, fsl,lx2160aqds-fpga
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb: /soc/i2c@2000000/fpga@66: failed to match any schema with compatible: ['fsl,ls1028aqds-fpga', 'fsl,fpga-qixis-i2c', 'simple-mfd']
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
[robh: tweak mdio-mux node name, drop .dts change]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for reg, clocks and clock-names.
Reviewed-by: Sam Protsenko <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
The Goodix GT7986U touch controller report touch data according to the
HID protocol through the SPI bus. However, it is incompatible with
Microsoft's HID-over-SPI protocol.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Charles Wang <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Merge series from Cezary Rojewski <[email protected]>:
A spiritual successor to haswell/baytrail removal series [1].
The avs-driver found in sound/soc/intel/avs is a direct replacement to
the existing skylake-driver. It covers all features supported by it and
more and aligns with the recommended flows and requirements based on
Windows driver equivalent.
The skylake-driver related UAPI has been removed with "ASoC: Drop
soc-topology ABI v4 support" [2].
For the official kernel tree the deprecation begun with v6.0. Most
skylake-drivers users moved to avs- or SOF-driver when AudioDSP
capabilities are available on the platform or to snd-hda-intel
(sound/pci/hda) when such capabilities are not.
For the supported trees the deprecation begun with v5.4 with v5.15 being
the first where the skylake-driver is disabled entirely.
All machine board drivers that consume this DSP driver have their
replacements present within sound/soc/intel/avs/boards/ directory.
[1]: https://lore.kernel.org/alsa-devel/[email protected]/
[2]: https://lore.kernel.org/alsa-devel/[email protected]/
|
|
Convert binding doc colibri-vf50-ts.txt to yaml.
Additional change:
- add ref touchscreen.yaml.
- remove standard pinctrl properties.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8qm-apalis-eval.dtb: /touchscreen:
failed to match any schema with compatible: ['toradex,vf50-touchscreen']
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
KD50G21-40NT-A1
Document On Tat Industrial Company KD50G21-40NT-A1 5" WVGA TFT LCD panel.
The LCD module specification can be found at:
https://cdn-shop.adafruit.com/datasheets/KD50G21-40NT-A1.pdf
Signed-off-by: Liu Ying <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The RG28XX panel is a display panel of the Anbernic RG28XX, a handheld
gaming device from Anbernic. It is 2.8 inches in size (diagonally) with
a resolution of 480x640.
This panel is driven by a variant of the ST7701 driver IC internally,
confirmed by dumping and analyzing its BSP initialization sequence
by using a logic analyzer. It is very similar to the existing
densitron,dmt028vghmcmi-1a panel, but differs in some unknown
register values, so add a new entry for the panel to distinguish them.
Additionally, the panel only has an SPI instead of MIPI DSI.
So add and modify for SPI as well.
Although a panel connected via SPI with a D/CX pin theoretically exists,
no such panels have been found for this driver yet. Therefore, disable
the use of the dc-gpios property for all currently known devices.
Signed-off-by: Hironori KIKUCHI <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Jessica Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add Innolux G070ACE-LH3 7" WVGA (800x480) TFT LCD panel compatible string.
Signed-off-by: Steffen Trumtrar <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Add bindings for the Surface System Aggregator Module (SAM/SSAM), the
Microsoft Surface-standard Embedded Controller, used on both x86- and
Qualcomm-based devices.
It provides a plethora of functions, depending on what's wired up to
it. That includes but is not limited to: fan control, keyboard/touchpad
support, thermal sensors, power control, special buttons, tablet mode.
Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
There exist some embedded controllers (like Microsoft SAM found on
Surface devices or Apple Oscar found on old iPhones) that connect to
the host device via serial.
Allow that class of devices to exist under serial interface controller
nodes.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hans de Goede <[email protected]>
|
|
Convert binding doc tlv320aic31xx.txt to yaml format.
Additional change:
- add i2c node in example.
- replace MICBIAS_OFF with MICBIAS_2_0v in example because MICBIAS_OFF have
been defined in header file.
- add ref to dai-common.yaml.
- add #sound-dai-cells.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-zii-ultra-rmb3.dtb: /soc@0/bus@30800000/i2c@30a30000/codec@18:
failed to match any schema with compatible: ['ti,tlv320dac3100']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
fsl,enetc-ptp is embedded pcie device. Add compatible string pci1957,ee02.
Fix warning:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb: ethernet@0,4:
compatible:0: 'pci1957,ee02' is not one of ['fsl,etsec-ptp', 'fsl,fman-ptp-timer', 'fsl,dpaa2-ptp', 'fsl,enetc-ptp']
Signed-off-by: Frank Li <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO and PWM due for the v6.12 merge window
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We need the usb / thunderbolt fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
System Controller Management Interface(SCMI) firmwares might have different
designs depending on the platform: the maximum receive channel timeout
value might vary depending on the specific underlying hardware and firmware
design choices.
Introduce the general property max-rx-timeout-ms property to describe the
transport needs of a specific platform design.
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
[Cristian: reworded commit message, s/mailbox/transport in description]
Signed-off-by: Cristian Marussi <[email protected]>
Tested-by: Peng Fan <[email protected]> #i.MX95 19x19 EVK
Message-Id: <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
|
|
Add device tree documentation for ENS210 family of temperature and
humidity sensors
Signed-off-by: Joshua Felmeden <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Change mdio.yaml nodename match pattern to
'^mdio(-(bus|external))?(@.+|-([0-9]+))$'
Fix mdio.yaml wrong parser mdio controller's address instead phy's address
when mdio-mux exista.
For example:
mdio-mux-emi1@54 {
compatible = "mdio-mux-mmioreg", "mdio-mux";
mdio@20 {
reg = <0x20>;
^^^ This is mdio controller register
ethernet-phy@2 {
reg = <0x2>;
^^^ This phy's address
};
};
};
Only phy's address is limited to 31 because MDIO bus definition.
But CHECK_DTBS report below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: mdio-mux-emi1@54:
mdio@20:reg:0:0: 32 is greater than the maximum of 31
The reason is that "mdio-mux-emi1@54" match "nodename: '^mdio(@.*)?'" in
mdio.yaml.
Change to '^mdio(-(bus|external))?(@.+|-([0-9]+))?$' to avoid wrong match
mdio mux controller's node.
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|