| Age | Commit message (Collapse) | Author | Files | Lines |
|
Document the 1200x1920 BOE TV101WUM-LL2 DSI Display Panel found
in the Lenovo Smart Tab M10 tablet. The controller is unknown.
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240828-topic-sdm450-upstream-tbx605f-panel-v3-1-b792f93e1d6b@linaro.org
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828-topic-sdm450-upstream-tbx605f-panel-v3-1-b792f93e1d6b@linaro.org
|
|
This documents LCKFB Taishan Pi which is a SBC based on the RK3566 SoC.
Signed-off-by: Junhao Xie <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Add an entry for Shenzhen JLC Technology LCKFB (https://lckfb.com/)
Signed-off-by: Junhao Xie <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
The Hardkernel ODROID-M1S is a single-board computer based on Rockchip
RK3566 SoC. It features e.g. 4/8 GB LPDDR4 RAM, 64 GB eMMC, SD-card,
GbE LAN, HDMI 2.0, M.2 NVMe and USB 2.0/3.0.
Add devicetree binding documentation for the Hardkernel ODROID-M1S board.
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
The vendor prefix for Hardkernel ODROID-M1 is incorrectly listed as
rockchip. Use the proper hardkernel vendor prefix for this board, while
at it also drop the redundant soc prefix.
Fixes: 19cc53eb2ce6 ("dt-bindings: rockchip: Add Hardkernel ODROID-M1 board")
Reviewed-by: Aurelien Jarno <[email protected]>
Signed-off-by: Jonas Karlman <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Add compatible string "fsl,imx8qxp-dma-apbh". It requires power-domains
compared with "fsl,imx28-dma-apbh".
Allow 'power-domains' property because i.MX8DXL i.MX8QM and i.MX8QXP need
it.
Keep the same restriction about 'power-domains' for other compatible
strings.
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
Improvements to Renesas media drivers:
- R-Car V4M support for VIN
- Fix rzg2l-csi2 module auto-loading
Signed-off-by: Hans Verkuil <[email protected]>
From: Laurent Pinchart <[email protected]>
Link: https://patchwork.linuxtv.org/project/linux-media/patch/[email protected]/
|
|
RK3588 has four Hantro H1 VEPUs (encoder-only) modules and one combined
Hantro H1/G1 VPU (decoder and encoder). These are not described as
separate IP, since they are sharing an internal cache. This adds the
RK3588 specific compatible string for the combined VPU, which seems to
be identical to the version found in the RK3568.
Signed-off-by: Jianfeng Liu <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sebastian Fricke <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
This encoder-only device is present four times on this SoC, and should
support everything the rk3568 vepu supports (so JPEG, H.264 and VP8
encoding). No fallback compatible has been added, since the operating
systems might already support RK3568 VEPU and want to avoid registering
four of them separately considering they can be used as a cluster.
Signed-off-by: Emmanuel Gil Peyrot <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Signed-off-by: Sebastian Fricke <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
The integration for this SoC is similar to RK3066/RK3188.
Document it's compatible.
Signed-off-by: Alex Bee <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Signed-off-by: Sebastian Fricke <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
KSZ8895/KSZ8864 is a switch family developed before KSZ8795 and after
KSZ8863, so it shares some registers and functions in those switches.
KSZ8895 has 5 ports and so is more similar to KSZ8795.
KSZ8864 is a 4-port version of KSZ8895. The first port is removed
while port 5 remains as a host port.
Signed-off-by: Tristram Ha <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://patch.msgid.link/BYAPR11MB3558FD0717772263FAD86846EC8B2@BYAPR11MB3558.namprd11.prod.outlook.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a rockchip,rk3576-gmac compatible for supporting the 2 gmac
devices on the rk3576.
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Document the monitored-battery property, which the existing driver can
use to set certain properties.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Chris Morgan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sebastian Reichel <[email protected]>
|
|
Allow specifying a hard limit of the maximum input current. Some PMICs
such as the AXP717 can pull up to 3.25A, so allow a value to be
specified that clamps this in the event the hardware is not designed
for it.
Signed-off-by: Chris Morgan <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sebastian Reichel <[email protected]>
|
|
Due to the design, Sophgo SG2042 use an external MCU to provide
hardware information, thermal information and reset control.
Add bindings for this monitor device.
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Tested-by: Chen Wang <[email protected]>
Reviewed-by: Chen Wang <[email protected]>
Message-ID: <IA1PR20MB49538276F283C4D01364AEB6BB822@IA1PR20MB4953.namprd20.prod.outlook.com>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Add device tree bindings and an example for max31790 device.
Signed-off-by: Chanh Nguyen <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Message-ID: <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
|
|
amdgpu pr conconflicts due to patches cherry-picked to -fixes, I might
as well catch up with a backmerge and handle them all. Plus both misc
and intel maintainers asked for a backmerge anyway.
Signed-off-by: Daniel Vetter <[email protected]>
|
|
The SC27XX fuel gauge supports a low voltage alarm IRQ, which is used
for more accurate battery capacity measurements with lower voltages.
This was unfortunately never documented in bindings, do so now.
The only in-tree user (sc2731.dtsi) has had interrupts specified
since its initial fuel-gauge submission and the current kernel
driver returns an error when no interrupt is specified, so also
add it to the required list.
Signed-off-by: Stanislav Jakubek <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/Zr3SAHlq5A78QvrW@standask-GA-A55M-S2HP
Signed-off-by: Sebastian Reichel <[email protected]>
|
|
The TPS23881 has an active-low reset pin that can be connected to an
SoC. Document this with the device-tree binding.
Signed-off-by: Kyle Swenson <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Reviewed-by: Kory Maincent <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Convert binding doc ads7846.txt to yaml format.
Additional change:
- add ref to touchscreen.yaml and spi-peripheral-props.yaml.
- use common node name touchscreen.
- sort ti properties alphabetically.
- sort common properties alphabetically.
- sort compatible string alphabetically.
- remove vcc-supply from required list.
- deprecated ti,x-min, ti,y-min
Fix below warning: arch/arm64/boot/dts/freescale/imx8mm-var-som-symphony.dtb: touchscreen@0:
ti,x-min: b'\x00}' is not of type 'object', 'array', 'boolean', 'null'
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Frank Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Add documentation for pa-stats node which is syscon regmap for
PA_STATS registers. This will be used to dump statistics maintained by
ICSSG firmware.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Acked-by: Nishanth Menon <[email protected]>
Signed-off-by: MD Danish Anwar <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Document the X1E80100-based Microsoft laptops.
Signed-off-by: Konrad Dybcio <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Pull in fixes to apply further refactoring.
|
|
s5p-mfc bindings to json-schema is already merged with
this commit 538af6e5856b ("dt-bindings: media: s5p-mfc:
convert bindings to json-schema"). Remove s5p-mfc.txt
file.
Fixes: 538af6e5856b ("dt-bindings: media: s5p-mfc: convert bindings to json-schema")
Signed-off-by: Aakarsh Jain <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Remove the duplicate compatible entry `renesas,sdhi-r9a09g057` and add a
restriction for clocks and clock-names for the RZ/V2H(P) SoC, which has
four clocks similar to the RZ/G2L SoC.
Reported-by: Geert Uytterhoeven <[email protected]>
Fixes: 32842af74abc ("dt-bindings: mmc: renesas,sdhi: Document RZ/V2H(P) support")
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
SG2042 use Synopsys dwcnshc IP for SD/eMMC controllers.
SG2042 defines 3 clocks for SD/eMMC controllers.
- EMMC_100M/SD_100M for cclk(Card clocks in DWC_mshc), so reuse
existing "core".
- AXI_EMMC/AXI_SD for aclk/hclk(Bus interface clocks in DWC_mshc)
and blck(Core Base Clock in DWC_mshc), these 3 clocks share one
source, so reuse existing "bus".
- 100K_EMMC/100K_SD for cqetmclk(Timer clocks in DWC_mshc), so reuse
existing "timer" which was added for rockchip specified.
Signed-off-by: Chen Wang <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/9ca450097e5389a38bcd7d8ddf863766df4cea10.1722847198.git.unicorn_wang@outlook.com
Signed-off-by: Ulf Hansson <[email protected]>
|
|
The SD/MMC block on the RZ/V2H(P) ("R9A09G057") SoC is similar to that
of the R-Car Gen3, but it has some differences:
- HS400 is not supported.
- It has additional SD_STATUS register to control voltage,
power enable and reset.
- It supports fixed address mode.
To accommodate these differences, a SoC-specific 'renesas,sdhi-r9a09g057'
compatible string is added.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Add binding for Nuvoton MA35D1 SDHCI controller.
Signed-off-by: Shan-Chun Hung <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Document DU found in RZ/G2UL SoC. The DU block is identical to RZ/G2L
SoC, but has only DPI interface.
While at it, add missing required property port@1 for RZ/G2L and RZ/V2L
SoCs. Currently there is no user for the DPI interface and hence there
won't be any ABI breakage for adding port@1 as required property for
RZ/G2L and RZ/V2L SoCs.
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Tomi Valkeinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Immutable branch for the SoC tree, merge to pinctrl devel
proper.
Signed-off-by: Linus Walleij <[email protected]>
|
|
Add pinctrl support for Sophgo CV1800 series SoC.
Signed-off-by: Inochi Amaoto <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/IA1PR20MB4953680DE7977CAD906DBDB4BBB32@IA1PR20MB4953.namprd20.prod.outlook.com
Signed-off-by: Linus Walleij <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.12
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC,
- Miscellaneous fixes and improvements.
Signed-off-by: Linus Walleij <[email protected]>
|
|
This series introduce new ICC drivers for some legacy socs
while at it also updates a bit of qcs404 driver which seems
to not receive much attention lately.
* icc-misc
dt-bindings: interconnect: qcom: Add Qualcomm MSM8976 NoC
interconnect: qcom: Add MSM8976 interconnect provider driver
dt-bindings: interconnect: qcom: Add Qualcomm MSM8937 NoC
interconnect: qcom: Add MSM8937 interconnect provider driver
interconnect: qcom: qcs404: Mark AP-owned nodes as such
interconnect: qcom: qcs404: Add regmaps and more bus descriptions
dt-bindings: interconnect: qcom: msm8939: Fix example
interconnect: qcom: msm8953: Add ab_coeff
dt-bindings: interconnect: qcom: msm8953: Fix 'See also' in description
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Georgi Djakov <[email protected]>
|
|
The virtual interconnect providers do not have their own IO address space,
but this is not documented in the DT schema and the following warnings are
reported by dtbs_check:
sc8180x-lenovo-flex-5g.dtb: interconnect-camnoc-virt: 'reg' is a required property
sc8180x-lenovo-flex-5g.dtb: interconnect-mc-virt: 'reg' is a required property
sc8180x-lenovo-flex-5g.dtb: interconnect-qup-virt: 'reg' is a required property
sc8180x-primus.dtb: interconnect-camnoc-virt: 'reg' is a required property
sc8180x-primus.dtb: interconnect-mc-virt: 'reg' is a required property
sc8180x-primus.dtb: interconnect-qup-virt: 'reg' is a required property
Fix this by adding them to the list of compatibles that do not require
the reg property.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Document the compatibles used to describe the bwmons present on the
SA8775p platform.
Signed-off-by: Tengfei Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Some SC7280-based boards crash when providing the "secure_non_pixel"
context bank, so allow only one iommu in the bindings also.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
Signed-off-by: Stanimir Varbanov <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
This node contains a child which is only probed if simple-mfd is in the
compatible list. Add this here.
Signed-off-by: Andrew Davis <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Convert Atmel PIO3 pinctrl binding document to DT schema format
json-schema.
Signed-off-by: Manikandan Muralidharan <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Claudiu Beznea <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a tweak to uinput interface to reject requests with abnormally large
number of slots. 100 slots/contacts should be enough for real devices
- support for FocalTech FT8201 added to the edt-ft5x06 driver
- tweaks to i8042 to handle more devices that have issue with its
emulation
- Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
840 G2
- other minor fixes
* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: himax_hx83112b - fix incorrect size when reading product ID
Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
Input: uinput - reject requests with unreasonable number of slots
Input: edt-ft5x06 - add support for FocalTech FT8201
dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
Input: adc-joystick - fix optional value handling
Input: synaptics - enable SMBus for HP Elitebook 840 G2
Input: ads7846 - ratelimit the spi_sync error message
|
|
"See also" in description seems to be wrongly defined,
make it inline with other yamls.
Fixes: 791ed23f735b ("dt-bindings: interconnect: qcom: Add Qualcomm MSM8953 NoC")
Signed-off-by: Adam Skladowski <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
For now example list snoc_mm as children of bimc which is obviously
not valid, drop bimc and move snoc_mm into snoc.
Signed-off-by: Adam Skladowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add bindings for Qualcomm MSM8937 Network-On-Chip interconnect devices.
Signed-off-by: Adam Skladowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add bindings for Qualcomm MSM8976 Network-On-Chip interconnect devices.
Signed-off-by: Adam Skladowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add the compatible string for the rk3576 SoC.
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
The sm8150 camnoc interconnect was mistakenly documented as
"qcom,sm8150-camnoc-noc", for which there is no reference to in
drivers or device tree.
Correct this to "qcom,sm8150-camnoc-virt".
Signed-off-by: Rayyan Ansari <[email protected]>
Acked-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Document support for the VIN module in the Renesas V4M (r8a779h0) SoC.
This device is compatible with the VIN module on the other Gen4 SoCs.
Signed-off-by: Niklas Söderlund <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Laurent Pinchart <[email protected]>
|
|
The Gen4 SoCs V3U, V4H and V4M have a similar video capture pipelines.
The datasheets for the SoCs have small nuances around the Pre-Clip
registers ELPrC and EPPrC in three use-cases, interlaced images,
embedded data and RAW8 input. On V4H the values written to the registers
are based on odd numbers while on V4M they are even numbers, values are
based on the input image size. No board that uses these SoCs which also
have the external peripherals to test these nuances exists. Most likely
this is an issue in the datasheet.
Before adding bindings for V4M add a family compatible fallback for
Gen4. That way the driver only needs to be updated once for Gen4, and we
still have the option to fix any problems in the driver if any testable
differences between the SoCs are found.
There are already DTS files using the V3U and V4H compatibles which need
to be updated to not produce a warning for DTS checks. The driver also
needs to keep the compatible values to be backward compatible , but for
new Gen4 SoCs such as V4M we can avoid this.
Signed-off-by: Niklas Söderlund <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Laurent Pinchart <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-output-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
|
|
Add all syscon compatibles for RK3576.
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|