aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2024-09-03dt-bindings: net: wireless: convert marvel-8xxx.txt to yaml formatFrank Li2-70/+93
Convert binding doc marvel-8xxx.txt to yaml format. Additional change: - Remove marvell,caldata_00_txpwrlimit_2g_cfg_set in example. - Remove mmc related property in example. - Add wakeup-source property. - Remove vmmc-supply and mmc-pwrseq. Fix below warning: arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dtb: /soc@0/bus@30800000/mmc@30b40000/wifi@1: failed to match any schema with compatible: ['marvell,sd8997'] Acked-by: Brian Norris <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Frank Li <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-09-03dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADCThomas Bonnefille1-0/+83
The Sophgo CV1800B SARADC is a Successive Approximation ADC that can be found in the Sophgo CV1800B SoC. Signed-off-by: Thomas Bonnefille <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-09-03dt-bindings: iio: magnetometer: Add ak09118Danila Tikhonov1-0/+4
Document asahi-kasei,ak09918 compatible as a fallback compatible, ak09918 is register compatible with ak09912. Signed-off-by: Danila Tikhonov <[email protected]> Signed-off-by: Barnabás Czémán <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jonathan Cameron <[email protected]>
2024-09-03dt-bindings: mfd: mediatek: Add codec property for MT6357 PMICAlexandre Mergnat1-0/+21
Add the audio codec sub-device. This sub-device is used to set the optional voltage values according to the hardware. The properties are: - Setup of microphone bias voltage. - Setup of the speaker pin pull-down. Also, add the audio power supply property which is dedicated for the audio codec sub-device. Signed-off-by: Alexandre Mergnat <[email protected]> Link: https://patch.msgid.link/[email protected] Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2024-09-03ASoC: dt-bindings: mediatek,mt8365-mt6357: Add audio sound card documentAlexandre Mergnat1-0/+107
Add soundcard bindings for the MT8365 SoC with the MT6357 audio codec. Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Alexandre Mergnat <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-09-03ASoC: dt-bindings: mediatek,mt8365-afe: Add audio afe documentAlexandre Mergnat1-0/+130
Add MT8365 audio front-end bindings Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Signed-off-by: Alexandre Mergnat <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-09-03spi: dt-bindings: Add rockchip,rk3576-spi compatibleDetlev Casanova1-0/+1
It is compatible with the rockchip,rk3066-spi SPI core. Signed-off-by: Detlev Casanova <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-09-03dt-bindings: PCI: mediatek-gen3: Add support for Airoha EN7581Lorenzo Bianconi1-5/+63
Introduce Airoha EN7581 entry in mediatek-gen3 PCIe controller binding. Link: https://lore.kernel.org/linux-pci/138d65a140c3dcf2a6aefecc33ba6ba3ca300a23.1720022580.git.lorenzo@kernel.org Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Acked-by: Jianjun Wang <[email protected]>
2024-09-03dt-bindings: mmc: sdhci-atmel: Convert to json schemaDharma Balasubiramani2-35/+92
Convert sdhci-atmel documentation to yaml format. The new file will inherit from sdhci-common.yaml. Note: Add microchip,sama7g5-sdhci to compatible list as we already use it in the DT. Signed-off-by: Dharma Balasubiramani <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2024-09-03dt-bindings: mmc: Add support for rk3576 dw-mshcDetlev Casanova1-0/+2
Add the compatible string for rockchip,rk3576-dw-mshc in its own new block, for devices that have internal phase settings instead of external clocks. Signed-off-by: Detlev Casanova <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Heiko Stuebner <[email protected]> Link: https://lore.kernel.org/r/010201919996f687-08c1988a-f588-46fa-ad82-023068c316ba-000000@eu-west-1.amazonses.com Signed-off-by: Ulf Hansson <[email protected]>
2024-09-03ASoC: dt-bindings: realtek,rt5616: Document audio graph portHeiko Stuebner1-0/+4
The codec can be used in conjunction with an audio-graph-card to provide an endpoint for binding with the other side of the audio link. Document the 'port' property that is used for this to prevent dtbscheck errors like: rockchip/rk3588-nanopc-t6-lts.dtb: codec@1b: Unevaluated properties are not allowed ('port' was unexpected) from schema $id: http://devicetree.org/schemas/sound/realtek,rt5616.yaml# Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-09-03ASoC: dt-bindings: realtek,rt5616: document mclk clockHeiko Stuebner1-0/+8
Both devicetrees and driver implementation already use the specified mclk in the field, so at least document the clock too, similarly to other Realtek codec. This has the nice additional effect of getting rid of dtbscheck warning. Signed-off-by: Heiko Stuebner <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-09-03dt-bindings: HID: i2c-hid: elan: Introduce Elan ekth6a12nayZhaoxiong Lv1-1/+3
The Elan ekth6a12nay touch screen chip same as Elan eKTH6915 controller has a reset gpio. The difference is that they have different post_power_delay_ms. Acked-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Zhaoxiong Lv <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2024-09-03Merge tag 'v6.12-rockchip-dts64-1' of ↵Arnd Bergmann2-3/+31
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards: Firefly PX30 Core SoM with JD4 baseboard, NanoPi 2S Plus, Taishan Pi RK3566, ODROID-M1S,NanoPC-T6 LTS, Cool Pi CM5 GenBook Big number of improvements for NanoPC-T6,QNAP-TS433 and FastRhino R66S With recent dtc changes making it into linux-next the Wolfvision Visualizer overlay finally compiles without warnings. And smaller number of improvements on a number of Radxa boards. Interesting new additions on a soc-level are the hardware RNG on rk3568, an additional sdmmc-controller (not supported before) on rk3328 and v4l video codecs for the rk3588 (decoding of h.264 amongst others). * tag 'v6.12-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (62 commits) arm64: dts: rockchip: drop unsupported regulator-property from NanoPC-T6 arm64: dts: rockchip: drop unsupported regulator property from NanoPC-T6 arm64: dts: rockchip: use correct fcs,suspend-voltage-selector on NanoPC-T6 arm64: dts: rockchip: add Mask Rom key on NanoPC-T6 arm64: dts: rockchip: enable USB-C on NanoPC-T6 arm64: dts: rockchip: enable GPU on NanoPC-T6 arm64: dts: rockchip: add IR-receiver to NanoPC-T6 arm64: dts: rockchip: add SPI flash on NanoPC-T6 arm64: dts: rockchip: add NanoPC-T6 LTS arm64: dts: rockchip: move NanoPC-T6 parts to DTS arm64: dts: rockchip: prepare NanoPC-T6 for LTS board dt-bindings: arm: rockchip: Add NanoPC-T6 LTS arm64: dts: rockchip: disable display subsystem only for Radxa E25 arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A arm64: dts: rockchip: remove unnecessary properties for Radxa ROCK 5A arm64: dts: rockchip: add dts for LCKFB Taishan Pi RK3566 dt-bindings: arm: rockchip: Add LCKFB Taishan Pi RK3566 dt-bindings: vendor-prefixes: Add Shenzhen JLC Technology Group LCKFB arm64: dts: rockchip: Add Hardkernel ODROID-M1S dt-bindings: arm: rockchip: Add Hardkernel ODROID-M1S ... Link: https://lore.kernel.org/r/6322098.17fYzF0512@diego Signed-off-by: Arnd Bergmann <[email protected]>
2024-09-03Merge tag 'at91-dt-6.12' of ↵Arnd Bergmann2-178/+184
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt Microchip AT91 device tree updates for v6.12 It contains: - SAMA7G5-EK DTS was updated with EEPROM nodes containing Ethernet addresses (needed, at least, when U-Boot is removed from the booting chain) - 5V supplies were added to to MCP16502 PMIC nodes for better hardware description - cleanups around pinctrl nodes which removed many dtbs_check warnings; along with it the pinctrl documentation was converted to json schema - fixes for the RTC and RTT supply clocks on SAMA7G5 and SAM9X60 - other cleanups to fix dtbs_check warnings * tag 'at91-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: microchip: sama7g5: Fix RTT clock ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks dt-bindings: pinctrl: Convert Atmel PIO3 pinctrl to json-schema ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller ARM: dts: microchip: sama5d29_curiosity: Add reg_5v to supply PMIC nodes ARM: dts: microchip: at91-sama5d27_wlsom1: Add reg_5v to supply PMIC nodes ARM: dts: microchip: at91-sama5d2_icp: Add reg_5v to supply PMIC nodes ARM: dts: microchip: at91-sama7g54_curiosity: Add reg_5v to supply PMIC nodes ARM: dts: microchip: at91-sama7g5ek: Add reg_5v to supply PMIC nodes ARM: dts: microchip: at91: align LED node name with bindings ARM: dts: microchip: sam9x60: Move i2c address/size to dtsi ARM: dts: microchip: at91-sama7g5ek: add EEPROMs Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-09-03Merge tag 'tegra-for-6.12-dt-bindings' of ↵Arnd Bergmann1-0/+42
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt dt-bindings: Changes for v6.12-rc1 This adds compatible strings for all revisions of the Nyan board. * tag 'tegra-for-6.12-dt-bindings' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: arm: tegra: Document Nyan, all revisions in kernel tree Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-09-03Merge tag 'samsung-dt64-6.12' of ↵Arnd Bergmann2-0/+181
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.12 1. Exynos7885: Correct amount of RAM on Samsung Galaxy A8. 2. ExynosAutov9: Add new DPUM clock controller and DPUM IOMMU (SysMMU). 3. ExynosAutov920: Add initial (incomplete) clock controllers: TOP and PERIC0 controllers. 4. Google GS101: Add reboot and poweroff support. 5. Add binding headers with clock IDs for several devices, used by the DTS. * tag 'samsung-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynosautov920: add initial CMU clock nodes in ExynosAuto v920 dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings arm64: dts: exynosautov9: Add dpum SysMMU arm64: dts: exynosautov9: add dpum clock DT nodes dt-bindings: clock: exynosautov9: add dpum clock dt-bindings: clock: exynos7885: Add indices for USB clocks dt-bindings: clock: exynos7885: Add CMU_TOP PLL MUX indices dt-bindings: clock: exynos7885: Fix duplicated binding dt-bindings: clock: exynos850: Add TMU clock arm64: dts: exynos: gs101: add syscon-poweroff and syscon-reboot nodes arm64: dts: exynos: exynos7885-jackpotlte: Correct RAM amount to 4GB Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-09-03Merge tag 'renesas-dt-bindings-for-v6.12-tag1' of ↵Arnd Bergmann3-0/+14
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DT binding updates for v6.12 - Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC. * tag 'renesas-dt-bindings-for-v6.12-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: dt-bindings: reset: renesas: Document RZ/G2M v3.0 (r8a774a3) reset module dt-bindings: power: renesas: Document RZ/G2M v3.0 (r8a774a3) SYSC binding dt-bindings: soc: renesas: Document RZ/G2M v3.0 (r8a774a3) SoC Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-09-03dt-bindings: nvmem: Use soc-nvmem node name instead of nvmemMichal Simek1-1/+1
Based on commit d8764d347bd7 ("dt-bindings: firmware: xilinx: Describe soc-nvmem subnode") soc-nvmem should be used instead of simple nvmem that's why also update example to have it described correctly everywhere. Fixes: c7f99cd8fb6b ("dt-bindings: nvmem: Convert xlnx,zynqmp-nvmem.txt to yaml") Cc: stable <[email protected]> Signed-off-by: Michal Simek <[email protected]> Acked-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-09-03dt-bindings: nvmem: sfp: add ref to nvmem-deprecated-cells.yamlFrank Li1-0/+1
Add ref nvmem-deprecated-cells.yaml to support old style binding. Fix below CHECK_DTBS warning. efuse@1e80000: Unevaluated properties are not allowed ('unique-id@1c' was unexpected) Signed-off-by: Frank Li <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-09-03dt-bindings: nvmem: st,stm32-romem: add missing "unevaluatedProperties" on ↵Krzysztof Kozlowski1-0/+3
child nodes All nodes need an explicit additionalProperties or unevaluatedProperties unless a $ref has one that's false. Fixing this for STM32 Factory-programmed data binding needs referencing fixed layout schema for children. Add reference to the NVMEM deprecated cells for the schema to be complete. This fixes dt_binding_check warning: st,stm32-romem.yaml: ^.*@[0-9a-f]+$: Missing additionalProperties/unevaluatedProperties constraint Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Conor Dooley <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-09-03dt-bindings: nvmem: convert U-Boot env to a layoutRafał Miłecki2-5/+35
U-Boot environment variables can be stored in various data sources. MTD is just one of available options. Refactor DT binding into a layout so it can be used with UBI volumes and other NVMEM devices. Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Rafał Miłecki <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-09-03dt-bindings: nvmem: imx-ocotp: support i.MX95Peng Fan1-1/+2
Add i.MX95 ocotp compatible string Signed-off-by: Peng Fan <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-09-03dt-bindings: misc: qcom,fastrpc: document new domain IDBartosz Golaszewski1-0/+1
Add "cdsp1" as the new supported label for the CDSP1 fastrpc domain. Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-09-03dt-bindings: misc: qcom,fastrpc: increase the max number of iommusBartosz Golaszewski1-1/+1
The fastrpc components on the SA8775P SoC can require up to 10 IOMMU entries. Bump the maxItems. Signed-off-by: Bartosz Golaszewski <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-09-03Merge tag 'at24-updates-for-v6.12-rc1' of ↵Wolfram Sang1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-mergewindow at24 updates for v6.12-rc1 - document a new model from giantec in DT bindings
2024-09-03Merge tag 'iio-for-6.12a' of ↵Greg Kroah-Hartman27-67/+1556
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-testing Jonathan writes: IIO: 1st set of new device support, features and cleanup for 6.12 Includes a merge of spi-mos-config branch from spi.git that brings support needed for the AD4000 driver. Lots of new device support this time including 9 new drivers and substantial changes to add new support to several more. New device support ------------------ Given we have a lot of new support, I've subcategorized them: Substantial changes, or new driver ********************************** adi,ad4000 - New driver for this high speed ADC. adi,ad4695 - New driver supporting AD4690, AD4696, AD4697 and AD4698 ADCs. - Follow up series added triggered buffer support. adi,ad7380 - Add support for single ended parts, AD7386, ADC7387, AD7388 and -4 variants. (driver previously only support differential parts). These variants have an additional front end MUX so only half the channels can be sampled efficiently. adi,ad9467 - Refactor and extend driver to support ad9643, ad9449 and ad9652 high speed ADCs. adi,adxl380 - New driver for this low power accelerometer. adi,ltc2664 - New driver supporting LTC2664 and LTC2672 DACs. microchip,pac1921 - New driver for this power/current monitor chip. rohm,bh1745 - New driver for this RGBC colour sensor. rohm,bu27034anuc - The original bu27034 was canceled before mass production, so the driver is modified to support the BU27034ANUC which had some significant differences. DT compatible changed to avoid chance of old driver ever binding to real hardware. sciosense,ens210 - New driver for ens210, ens210a, ens211, ens212, ens213a, and ens215 temperature and humidity sensors (all register compatible up to some conversion time differences) sensiron,sdp500 - New driver for this differential pressure sensor. tyhx,hx9023s - New driver to support this capacitive proximity sensor. Minor changes to support new devices ************************************ adi,adf4377 - Add support for the single output adf4378. kionix,kxcjk-1013 - Add support for KX022-1020 accelerometer (binding and ID table only) liteon,ltrf216a - Add support for ltr-308. A few minor differences in features set rockchip,saradc - Add ID for rk3576-saradc sensortek,stk3310 - Add ID for stk3013 proximity sensor which (despite documentation) has an ambient light sensor and is compatible with existing parts. Documentation updates --------------------- Generalize ABI docs for shunt resistor attribute Improve calibscale and calibbias related documentation. A couple of follow up patches to resolve duplicate documentation that resulted. New core features ----------------- backend - Add option for debugfs - useful for test pattern control - Use this for both adi-axi-adc and adi-axi-dac trigger suspend - Add functions to allow triggers to be suspended. This avoids problems when a device enters suspend to idle with a sysfs trigger. Use it for now in the bmi323 only. New driver features ------------------- adi,ad7192 - Add option to be a clock provider (+ additional clock config options) adi,ad7380 - Add documentation for this fairly new driver. adi,ad9461 - Provide control of test modes and backend validation blocks used to identify problems (via debugfs) adi,ad9739 - Add backend debugfs and docs for what is provided via adi-axi-dac avago,apds9960 - Add proximity and gesture calibration offset control bosch,bmp280 - Triggered buffer support including adding raw+scale output for sysfs. liteon,ltr390 - Add configuration of integration time and scale. stm,dfsdm - Convert this SD modulator driver to backend framework and add support for channel scaling + modern channel bindings. Treewide cleanup ---------------- iio_dev->masklength: Making it private. - Provide access function to read the core compute channel mask length and a macro to iterate over elements in the active_scan_mask. - Enables marking masklength __private preventing drivers from writing it without triggering a build warning whilst minimizing overhead in what are typically hot paths. - Convert all drivers and finally mark it private. Merge conflicts resolved in drivers applied after this point. Constify regmap_bus - These are never modified, so mark them const. Core cleanup ------------ backend - A few late breaking bits of feedback (unused variable, error messages) dma-buffer - Namespace exports. core - Drop unused assignment. Driver cleanup -------------- adi,ad4695 - Fixing binding to reflect that common-mode-channel is a scalar. adi,ad7280a - Use __free(kfree) to simplify freeing of receive buffer. adi,ad7606 - Various dt-binding cleanup and improvements. - Fix oversampling related gpio handling. - Make polarity of standby gpio match documentation. - use guard() to simplify lock handling. adi,ad7768 - Use device_for_each_child_node_scoped() instead of fwnode equivalent. adi,ad7124 - Reduce SPI transfers by avoiding separate writes to different fields in the same register. - Start the ADC in idle mode. adi,adis - Drop ifdefs in favor of IS_ENABLED. adi,admv8818 - Fix wrong ABI docs. asahi-kasei,ak8975 - Drop a prefix free compatible accidentally added recently. aspeed,adc - Use of_property_present() instead of of_find_property() to see if the property is there or not. atmel,at91, - Use __free(kfree) to simplify freeing of channel related array. bosch,bma400 - Use __free(kfree) to simplify freeing a locally allocated string. bosch,bmc150 - Add missing mount-matrix binding docs. bosch,bme680 - Fix read/write to ensure multiple necessary sequential reads without device configuration change. - Drop unnecessary type casts and use more appropriate data types. - Drop some left over ACPI code as ACPI support was removed due to invalid IDs (and no known users). - Sort headers consistently. - Avoid unnecessary duplicate read and redundant read of gas config. - Use bulk reads to get calibration data. - Reorder allocation of IIO device to be prior to device init. - Add remaining read/write buffers to the union used already for all others. - Tidy up error checks for consistency of style, including dev_err_probe() - Bring the device startup procedure inline with the vendor code. - Reorder code so mode forcing is more obvious occurring where needed. - Tidy up data locality in reading functions so no magic data is stored in state structures just to get it across function calls. - Make a local lookup table static to avoid placing it on the stack. bosch,bmp280 - Fix BME280 regmap to not include registers it doesn't have. - Wait a little longer after config to allow for maximum possible necessary wait. - Reorganize headers. - Make conversion_time_max array static to avoid placing it on the stack. maxim,max1363 - Use __free(kfree) to simplify freeing transmission buffer. microchip,mcp3964 - Use devm_regulator_get_enable_read_voltage() microchip,mcp3911 - Use devm_regulator_get_enable_read_voltage() microchip,mcp4728 - Use devm_regulator_get_enable_read_voltage() microchip,mcp4922 - Use devm_regulator_get_enable_read_voltage() and devm_* to allow dropping of explicit remove() callback. onnn,noa1305 - Various tidy up. - Provide available scale values. - Make integration time configurable. - Fix up integration time look up (/2 error) ti,dac7311 - Check if spi_setup() succeeded. ti,tsc2046 - Use __free(kfree) to simplify freeing rx and tx buffers. - Use devm_regulator_get_enable_read_voltage() Various minor fixes not called out explicitly. * tag 'iio-for-6.12a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (250 commits) drivers:iio:Fix the NULL vs IS_ERR() bug for debugfs_create_dir() iio: sgp40: retain documentation in driver iio: ABI: remove duplicate in_resistance_calibbias dt-bindings: iio: st,stm32-adc: add top-level constraints iio: ABI: add missing calibbias attributes iio: ABI: add missing calibscale attributes iio: ABI: sort calibscale attributes iio: ABI: document calibscale_available attributes iio: light: ltr390: Calculate 'counts_per_uvi' dynamically iio: light: ltr390: Add ALS channel and support for gain and resolution doc: iio: ad4695: document buffered read iio: adc: ad4695: implement triggered buffer iio: proximity: hx9023s: Fix error code in hx9023s_property_get() iio: light: noa1305: Fix up integration time look up iio: humidity: Add support for ENS210 dt-bindings: iio: humidity: add ENS210 sensor family iio: imu: adis16460: drop ifdef around CONFIG_DEBUG_FS iio: imu: adis16400: drop ifdef around CONFIG_DEBUG_FS iio: imu: adis16480: drop ifdef around CONFIG_DEBUG_FS iio: imu: adis16475: drop ifdef around CONFIG_DEBUG_FS ...
2024-09-03dt-bindings: pinctrl: qcom: add missing type to GPIO hogsKrzysztof Kozlowski3-0/+3
GPIO hog nodes should define type, otherwise "dummy-hog" boolean properties would be allowed. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2024-09-03dt-bindings: arm: fsl: Add Variscite Symphony board and VAR-SOM-MX8MP SoMTarang Raval1-0/+6
Adds support for the Variscite VAR-SOM-MX8MP System on Module and the Variscite Symphony Evaluation Kit. Signed-off-by: Tarang Raval <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-03dt-bindings: phy: mxs-usb-phy: add nxp,sim propertyXu Yang1-0/+17
i.MX7ULP need properly set System Integration Module(SIM) module to make usb wakeup work well. This will add a "nxp,sim" property. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Xu Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-09-03Merge tag 'soc_fsl-6.12-2' of https://github.com/chleroy/linux into soc/driversArnd Bergmann2-0/+407
- A series from Hervé Codina that bring support for the newer version of QMC (QUICC Multi-channel Controller) and TSA (Time Slots Assigner) found on MPC 83xx micro-controllers. - Misc changes for qbman freescale drivers for removing a redundant warning and using iommu_paging_domain_alloc() * tag 'soc_fsl-6.12-2' of https://github.com/chleroy/linux: (38 commits) soc: fsl: qbman: Remove redundant warnings soc: fsl: qbman: Use iommu_paging_domain_alloc() MAINTAINERS: Add QE files related to the Freescale QMC controller soc: fsl: cpm1: qmc: Handle QUICC Engine (QE) soft-qmc firmware soc: fsl: cpm1: qmc: Add support for QUICC Engine (QE) implementation soc: fsl: qe: Add missing PUSHSCHED command soc: fsl: qe: Add resource-managed muram allocators soc: fsl: cpm1: qmc: Introduce qmc_version soc: fsl: cpm1: qmc: Rename SCC_GSMRL_MODE_QMC soc: fsl: cpm1: qmc: Handle RPACK initialization soc: fsl: cpm1: qmc: Rename qmc_chan_command() soc: fsl: cpm1: qmc: Introduce qmc_{init,exit}_xcc() and their CPM1 version soc: fsl: cpm1: qmc: Introduce qmc_init_resource() and its CPM1 version soc: fsl: cpm1: qmc: Re-order probe() operations soc: fsl: cpm1: qmc: Introduce qmc_data structure dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) QMC controller soc: fsl: cpm1: qmc: Add missing spinlock comment soc: fsl: cpm1: qmc: Fix 'transmiter' typo soc: fsl: cpm1: qmc: Remove unneeded parenthesis soc: fsl: cpm1: qmc: Fix blank line and spaces ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-09-03dt-bindings: arm: fsl: drop usage of VAR-SOM-MX8MM SoM compatible aloneKrzysztof Kozlowski1-1/+0
The Variscite VAR-SOM-MX8MM System-on-Module cannot be used alone without motherboard, so drop the usage of its compatible alone. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Peng Fan <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2024-09-03dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) QMC controllerHerve Codina1-0/+197
Add support for the QMC (QUICC Multichannel Controller) available in some PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321. This QE QMC is similar to the CPM QMC except that it uses UCCs (Unified Communication Controllers) instead of SCCs (Serial Communication Controllers). Also, compared against the CPM QMC, this QE QMC does not use a fixed area for the UCC/SCC parameters area but it uses a dynamic area allocated and provided to the hardware at runtime. Last point, the QE QMC can use a firmware to have the QMC working in 'soft-qmc' mode. Signed-off-by: Herve Codina <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christophe Leroy <[email protected]>
2024-09-03dt-bindings: soc: fsl: cpm_qe: Add QUICC Engine (QE) TSA controllerHerve Codina1-0/+210
Add support for the time slot assigner (TSA) available in some PowerQUICC SoC that uses a QUICC Engine (QE) block such as MPC8321. This QE TSA is similar to the CPM TSA except that it uses UCCs (Unified Communication Controllers) instead of SCCs (Serial Communication Controllers). Also, compared against the CPM TSA, this QE TSA can handle up to 4 TDMs instead of 2 and allows to configure the logic level of sync signals. Signed-off-by: Herve Codina <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christophe Leroy <[email protected]>
2024-09-03Merge 6.11-rc6 into usb-nextGreg Kroah-Hartman2-1/+9
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-09-02dt-bindings: thermal: tsens: document support on SA8255pNikunj Kela1-0/+1
Add compatible for sensors representing support on SA8255p. Signed-off-by: Nikunj Kela <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Lezcano <[email protected]>
2024-09-02dt-bindings: thermal: amlogic,thermal: add optional power-domainsGeorge Stark1-0/+3
On newer SoCs, the thermal hardware can require a power domain to operate so add corresponding optional property. Signed-off-by: George Stark <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Daniel Lezcano <[email protected]>
2024-09-02dt-bindings: gpio: simplify GPIO hog nodes schemaKrzysztof Kozlowski5-56/+0
The core schema in dtschema already strictly defines contents of nodes with "gpio-hog" property (with additionalProperties: false), thus the only thing device schema should do is: define "type: object" and required "gpio-hog". Make the code a bit simpler by removing redundant parts. Reviewed-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]>
2024-09-02dt-bindings: gpio: fcs,fxl6408: add missing type to GPIO hogsKrzysztof Kozlowski1-0/+1
GPIO hog nodes should define type, otherwise "dummy-hog" boolean properties would be allowed. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]>
2024-09-02Merge tag 'scmi-updates-6.12' of ↵Arnd Bergmann2-1/+62
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers Arm SCMI updates for v6.12 Few main features include: 1. SCMI transport as stand-alone drivers Currently the SCMI transport layer is being built embedded into in the core SCMI stack. Some of these transports, despite being currently part of the main SCMI module, are indeed also registered with different subsystems like optee or virtio, and actively probed also by those. This leads to a few awkward and convoluted tricks to properly handle such interactions at boot time in the SCMI stack. This change adds the new logic to the core SCMI stack so that each existing transport is transitioned to be a standi-alone driver. With that all the probe deferral and awkward retries between the SCMI core stack and the transports has been removed, since no more needed. 2. Support for obtaining transport descriptors from the devicetree SCMI platform firmwares might have different designs depending on the platform. Some of the transport descriptors rely on such design. E.g. the maximum receive channel timeout value might vary depending on the specific underlying hardware and firmware design choices. This change adds support for max-rx-timeout-ms property to describe the transport needs of a specific platform design. It will be extended in the future to obtain other such hardware/firmware dependent transport related descriptors. 3. NXP i.MX95 specific SCMI vendor protocol extensions SCMI specification allows vendor or platform-specific extensions to the interface. NXP i.MX95 System Manager(SM) that implements SCMI extends the interface to implement couple of vendor/platform specific protocol, namely: a. Battery Backed Module(BBM) Protocol This protocol is intended provide access to the battery-backed module. This contains persistent storage (GPR), an RTC, and the ON/OFF button. The protocol can also provide access to similar functions implemented via external board components. b. MISC Protocol for misc settings This includes controls that are misc settings/actions that must be exposed from the SM to agents. They are device specific and are usually define to access bit fields in various mix block control modules, IOMUX_GPR, and other GPR/CSR owned by the SM. 4. SCMI debug/tracking metrics Since SCMI involves interaction with the entity(software, firmware and/or hardware) providing services or features, it is quite useful to track certain metrics(for pure debugging purposes) like how many messages were sent or received, were there any failures, what kind of failures, ..etc. This feature adds support for the same via debugfs. Apart from these main features, there are some miscellaneous updates, fixes and cleanups. * tag 'scmi-updates-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: (31 commits) rtc: support i.MX95 BBM RTC input: keyboard: support i.MX95 BBM module firmware: imx: Add i.MX95 MISC driver firmware: arm_scmi: Add initial support for i.MX MISC protocol firmware: arm_scmi: Add initial support for i.MX BBM protocol firmware: arm_scmi: Add NXP i.MX95 SCMI documentation dt-bindings: firmware: Add i.MX95 SCMI Extension protocol firmware: arm_scmi: Replace comma with the semicolon firmware: arm_scmi: Replace the use of of_node_put() to __free(device_node) firmware: arm_scmi: Fix trivial whitespace/coding style issues firmware: arm_scmi: Use max-rx-timeout-ms from devicetree dt-bindings: firmware: arm,scmi: Introduce property max-rx-timeout-ms firmware: arm_scmi: Remove const from transport descriptors firmware: arm_scmi: Simplify with scoped for each OF child loop firmware: arm_scmi: Update various protocols versions firmware: arm_scmi: Remove legacy transport-layer code firmware: arm_scmi: Make VirtIO transport a standalone driver firmware: arm_scmi: Make OPTEE transport a standalone driver firmware: arm_scmi: Make SMC transport a standalone driver firmware: arm_scmi: Make MBOX transport a standalone driver ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-09-02Revert "dt-bindings: reset: mobileye,eyeq5-reset: add bindings"Théo Lebrun1-43/+0
Switch from one sub-node per functionality in the system-controller to a single node representing the entire OLB instance. This is the recommended approach for controllers handling many different functionalities; it is a single controller and should be represented by a single devicetree node. The reset bindings is removed and all properties will be described by: soc/mobileye/mobileye,eyeq5-olb.yaml Reviewed-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Théo Lebrun <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Philipp Zabel <[email protected]>
2024-09-02dt-bindings: reset: Add Amlogic T7 reset controllerZelong Dong1-0/+1
Add a new compatible for Amlogic T7 reset controller. Signed-off-by: Zelong Dong <[email protected]> Signed-off-by: Kelvin Zhang <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Philipp Zabel <[email protected]>
2024-09-02Merge tag 'v6.12-rockchip-drivers-1' of ↵Arnd Bergmann2-0/+40
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers rk3308 io-domains, and some default settings for bits in the general register files for rk3128 and the new rk3576 soc. * tag 'v6.12-rockchip-drivers-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: soc: rockchip: grf: Add rk3576 default GRF values dt-bindings: soc: rockchip: Add rk3576 syscon compatibles soc: rockchip: grf: Set RK3128's vpu main clock soc: rockchip: io-domain: Add RK3308 IO voltage domains dt-bindings: power: rockchip: Document RK3308 IO voltage domains Link: https://lore.kernel.org/r/23316481.ssLaC8jLEa@diego Signed-off-by: Arnd Bergmann <[email protected]>
2024-09-02Merge tag 'memory-controller-drv-6.12' of ↵Arnd Bergmann2-15/+14
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers Memory controller drivers for v6.12 1. Tegra210 EMC: Driver refactoring and rework. 2. Tegra186 EMC: Drop unused function. 3. FSL WEIM: Correct fsl,weim-cs-timing property to properly validate it as an array. 4. TI AEMIF: Drop platform data support. 5. TI EMIF: Switch to of_property_read_bool(). 6. Several cleanups in multiple drivers: TI AEMIF and EMIF, Tegra EMC/MC, Atmel EBI, Samsung Exynos5422 DMC, STM32 FMC2 EBI, OMAP GPMC, PL172 and PL1353 SMC. These are mostly code simplifying around probe() like using - devm_clk_get_enabled(), - dev_err_probe(), - scoped device node handling (cleanup.h), - scoped for each OF child loops, - scoped/guard locks. * tag 'memory-controller-drv-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (35 commits) memory: mtk-smi: Use devm_clk_get_enabled() memory: pl353-smc: simplify with devm_clk_get_enabled() memory: pl353-smc: simplify with dev_err_probe() memory: pl172: simplify with devm_clk_get_enabled() memory: pl172: simplify with dev_err_probe() memory: omap-gpmc: simplify locking with guard() memory: emif: simplify locking with guard() memory: emif: drop unused 'irq_state' member memory: ti-aemif: Revert "memory: ti-aemif: don't needlessly iterate over child nodes" memory: ti-aemif: simplify with scoped for each OF child loop memory: ti-aemif: simplify with dev_err_probe() memory: tegra30-emc: simplify with scoped for each OF child loop memory: tegra20-emc: simplify with scoped for each OF child loop memory: tegra124-emc: simplify with scoped for each OF child loop memory: tegra-mc: simplify with scoped for each OF child loop memory: stm32-fmc2-ebi: simplify with dev_err_probe() memory: stm32-fmc2-ebi: simplify with scoped for each OF child loop memory: samsung: exynos5422-dmc: use scoped device node handling to simplify error paths memory: samsung: exynos5422-dmc: simplify dmc->dev usage memory: atmel-ebi: simplify with scoped for each OF child loop ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-09-02Merge tag 'samsung-drivers-6.12' of ↵Arnd Bergmann2-6/+9
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers Samsung SoC drivers for v6.12 1. Improve Samsung USI (Universal Serial Interface) DT binding, 2. Cleanup old Samsung MFC TXT binding. * tag 'samsung-drivers-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: media: s5p-mfc: Remove s5p-mfc.txt binding dt-bindings: samsung: exynos-usi: add missing constraints Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-09-02dt-bindings: reset: socionext,uniphier-glue-reset: add top-level constraintsKrzysztof Kozlowski1-2/+6
Properties with variable number of items per each device are expected to have widest constraints in top-level "properties:" block and further customized (narrowed) in "if:then:". Add missing top-level constraints for clock-names and reset-names. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Kunihiko Hayashi <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Philipp Zabel <[email protected]>
2024-09-02dt-bindings: soc: renesas: Document RZ/V2H EVK boardLad Prabhakar1-0/+2
Add "renesas,rzv2h-evk" which targets the Renesas RZ/V2H ("R9A09G057") EVK board. Signed-off-by: Lad Prabhakar <[email protected]> Acked-by: Rob Herring (Arm) <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2024-09-02dt-bindings: clock: renesas: Document RZ/V2H(P) SoC CPGLad Prabhakar1-0/+80
Document the device tree bindings for the Renesas RZ/V2H(P) SoC Clock Pulse Generator (CPG). CPG block handles the below operations: - Generation and control of clock signals for the IP modules - Generation and control of resets - Control over booting - Low power consumption and power supply domains Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the core clocks are a subset of the ones which are listed as part of section 4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register. Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2024-09-02dt-bindings: riscv: Add Sipeed LicheeRV Nano board compatiblesThomas Bonnefille1-0/+5
Document the compatible strings for the Sipeed LicheeRV Nano B board which uses the SOPHGO SG2002 SoC. Signed-off-by: Thomas Bonnefille <[email protected]> Acked-by: Conor Dooley <[email protected]> Reviewed-by: Inochi Amaoto <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Inochi Amaoto <[email protected]> Signed-off-by: Chen Wang <[email protected]>
2024-09-02dt-bindings: interrupt-controller: Add SOPHGO SG2002 plicThomas Bonnefille1-0/+1
Add compatible string for SOPHGO SG2002 Platform-Level Interruter Controller. Signed-off-by: Thomas Bonnefille <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://wiki.sipeed.com/hardware/en/lichee/RV_Nano/1_intro.html [1] Reviewed-by: Inochi Amaoto <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Inochi Amaoto <[email protected]> Signed-off-by: Chen Wang <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.