| Age | Commit message (Collapse) | Author | Files | Lines |
|
Correct the videocc header file name in SM8450 videocc bindings.
Fixes: 1e910b2ba0ed ("dt-bindings: clock: qcom: Add SM8450 video clock controller")
Signed-off-by: Jagadeesh Kona <[email protected]>
Reviewed-by: Bryan O'Donoghue <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
LIS2DS12 is an accelerometer by STMicroelectronics. It is identifiable by
its WhoAmI value 0x43.
Its register interface is not compatible with existing parts. For example:
- The full-scale values are present in register 0x20, in bits 2 and 3
(mask 0x0c). Most other supported sensors have the register address set
to 0x21, 0x23, 0x24, or 0x25. There is one sensor setting though
(bearing WhoAmI 0x3b) which has it's address set to 0x20, but the mask is
set to 0x20, not 0x0c.
- The full-scale values 2G, 4G, 8G, and 16G correspond to the register
values 0x00, 0x02, 0x03, 0x01 respectively. None of the sensor settings
have the value 0x01 associated with 16G.
Add the compatible string without any fallback.
Signed-off-by: Kaustabh Chakraborty <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add properties required for providing clock to other consumers.
Signed-off-by: Antoniu Miclaus <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
Add devicetree bindings for Texas Instruments ADS1119 16-bit ADC
with I2C interface.
Datasheet: https://www.ti.com/lit/gpn/ads1119
Signed-off-by: João Paulo Gonçalves <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
dtschema v2024.4, v2024.5 and maybe earlier do not select device nodes for
given binding validation if the schema contains compatible list with
pattern and a const fallback. This leads to binding being a no-op - not
being applied at all. Issue should be fixed in the dtschema but for now
add a work-around do the binding can be used against DTS validation.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/600507/
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/20240623-qcom-adreno-dts-bindings-driver-v2-4-9496410de992@linaro.org
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
Regex for newer Adreno compatibles can be simpler.
Suggested-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/600505/
Link: https://lore.kernel.org/r/20240623-qcom-adreno-dts-bindings-driver-v2-3-9496410de992@linaro.org
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
All devices should (and actually do) have same order of entries, if
possible. That's the case for reg/reg-names, so define the reg-names in
top-level to enforce that.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/600510/
Link: https://lore.kernel.org/r/20240623-qcom-adreno-dts-bindings-driver-v2-2-9496410de992@linaro.org
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
We expect each schema with variable number of clocks, to have the widest
constrains in top-level "properties:". This is more readable and also
makes binding stricter, if there is no "if:then:" block for given
variant.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/600504/
Link: https://lore.kernel.org/r/20240623-qcom-adreno-dts-bindings-driver-v2-1-9496410de992@linaro.org
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
The Dynamic Voltage and Frequency Scaling Resource Collector Regulators
are controlled with votes to the DVFSRC hardware.
This adds support for the regulators found in MT6873, MT8183, MT8192
and MT8195 SoCs.
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add MSM8953 compatible string with "qcom,msm-iommu-v2" as fallback
for the MSM8953 GPU IOMMU which is compatible with Qualcomm's secure
fw "SMMU v2" implementation.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/20240606-topic-sm8953-upstream-smmu-gpu-v2-1-67be88007d87@linaro.org
Signed-off-by: Joerg Roedel <[email protected]>
|
|
The Allwinner H616 and A523 contain IOMMU IP very similar to the H6, but
use a different reset value for the bypass register, which makes them
strictly speaking incompatible.
Add a new compatible string for the H616, and a version for the A523,
falling back to the H616.
Signed-off-by: Andre Przywara <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Joerg Roedel <[email protected]>
|
|
WOL modes such as magic-packet should be an OS policy.
By default, advertise supported modes and use ethtool to activate
the required mode.
Suggested-by: Andrew Lunn <[email protected]>
Signed-off-by: Vineeth Karumanchi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
The MSM8937 SoC uses a slightly different 28nm dsi phy. Add a new
compatible for it.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Barnabás Czémán <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/600514/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
Add the compatible for the MDP5 found on MSM8937.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Barnabás Czémán <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/600512/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
|
|
Kanak Shilledar <[email protected]> says:
This series of patches converts the RISC-V CPU interrupt controller to
the newer dt-schema binding.
Patch 1:
This patch is currently at v4 as it has been previously rolled out.
Contains the bindings for the interrupt controller.
Patch 2:
This patch is currently at v4.
Contains the reference to the above interrupt controller. Thus, making
all the RISC-V interrupt controller bindings in a centralized place.
These patches are interdependent.
Fixed the patch address mismatch error by changing DCO to @gmail.com
Kanak Shilledar (3):
dt-bindings: interrupt-controller: riscv,cpu-intc: convert to dtschema
dt-bindings: riscv: cpus: add ref to interrupt-controller
dt-bindings: serial: vt8500-uart: convert to json-schema
.../interrupt-controller/riscv,cpu-intc.txt | 52 -------------
.../interrupt-controller/riscv,cpu-intc.yaml | 73 +++++++++++++++++++
.../devicetree/bindings/riscv/cpus.yaml | 21 +-----
.../bindings/serial/via,vt8500-uart.yaml | 46 ++++++++++++
.../bindings/serial/vt8500-uart.txt | 27 -------
5 files changed, 120 insertions(+), 99 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml
create mode 100644 Documentation/devicetree/bindings/serial/via,vt8500-uart.yaml
delete mode 100644 Documentation/devicetree/bindings/serial/vt8500-uart.txt
* b4-shazam-merge:
dt-bindings: riscv: cpus: add ref to interrupt-controller
dt-bindings: interrupt-controller: riscv,cpu-intc: convert to dtschema
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
removed the redundant properties for interrupt-controller
and provide reference to the riscv,cpu-intc.yaml which defines
the interrupt-controller. making the properties for riscv
interrupt-controller at a central place.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Kanak Shilledar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Convert the RISC-V Hart-Level Interrupt Controller (HLIC) to newer
DT schema, Created DT schema based on the .txt file which had
`compatible`, `#interrupt-cells` and `interrupt-controller` as
required properties.
Changes made with respect to original file:
- Changed the example to just use interrupt-controller instead of
using the whole cpu block
- Changed the example compatible string.
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Kanak Shilledar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Command mode panels provide TE signal back to the DSI host to signal
that the frame display has completed and update of the image will not
cause tearing. Usually it is connected to the first GPIO with the
mdp_vsync function, which is the default. In such case the property can
be skipped.
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abhinav Kumar <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/598732/
Link: https://lore.kernel.org/r/[email protected]
|
|
Add Neardi LBA3368, a RK3368 based industrial board.
Signed-off-by: Alex Bee <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Add vendor prefix for Shanghai Neardi Technology Co., Ltd.
(http://neardi.com/)
Signed-off-by: Alex Bee <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Add devicetree bindings for the FriendlyElec CM3588 NAS board.
The CM3588 NAS by FriendlyElec pairs the CM3588 compute module, based on
the Rockchip RK3588 SoC, with the CM3588 NAS Kit carrier board.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Sebastian Kropatsch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>
|
|
Add YAML device tree binding for GC05A2 CMOS image sensor,
and the relevant MAINTAINERS entries.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Zhi Mao <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Add YAML device tree binding for GC08A3 CMOS image sensor,
and the relevant MAINTAINERS entries.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Zhi Mao <[email protected]>
Signed-off-by: Sakari Ailus <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Use flag saving spinlocks in the Renesas rzg2l driver. This fixes up
PREEMPT_RT problems.
- Remove broken Qualcomm PM8008 that clearly was never working. A new
version will arrive in the next merge window.
- Add a quirk for LP8764 regmap that was missed and made the TI J7200
board unusable.
- Fix persistance on the BCM2835 GPIO outputs kernel parameter so this
remains consisten across a booted kernel.
- Fix a potential deadlock in create_pinctrl()
- Fix some erroneous bitfields and pinmux reset in the Rockchip RK3328
driver.
* tag 'pinctrl-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: rockchip: fix pinmux reset in rockchip_pmx_set
pinctrl: rockchip: use dedicated pinctrl type for RK3328
pinctrl: rockchip: fix pinmux bits for RK3328 GPIO3-B pins
pinctrl: rockchip: fix pinmux bits for RK3328 GPIO2-B pins
pinctrl: fix deadlock in create_pinctrl() when handling -EPROBE_DEFER
pinctrl: bcm2835: Fix permissions of persist_gpio_outputs
pinctrl: tps6594: add missing support for LP8764 PMIC
dt-bindings: pinctrl: qcom,pmic-gpio: drop pm8008
pinctrl: qcom: spmi-gpio: drop broken pm8008 support
pinctrl: renesas: rzg2l: Use spin_{lock,unlock}_irq{save,restore}
|
|
Document support for E-FUSE non-volatile memory accessible through
OTP_MEM on R-Car V4H and V4M.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Yoshihiro Shimoda <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/436506babe4ce468fda19380d9373470468e3752.1716974502.git.geert+renesas@glider.be
|
|
Document support for E-FUSE non-volatile memory accessible through PFC
on R-Car V3U and S4-8.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Yoshihiro Shimoda <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/03e43e97941df238ef1a618852aecd7be68adbb0.1716974502.git.geert+renesas@glider.be
|
|
In some designs, the chip reset pin is connected to a GPIO, and this
GPIO needs to be set correctly before probing the driver, so add a
reset-gpios in the device tree.
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Lech Perczak <[email protected]>
Tested-by: Hugo Villeneuve <[email protected]>
Reviewed-by: Hugo Villeneuve <[email protected]>
Signed-off-by: Hui Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Convert the VIA VT8500 and WonderMedia WM8xxx UART Controller to
newer DT schema. Created DT schema based on the .txt file which had
`compatible`, `reg`, `interrupts` and `clocks` as required properties.
Additions to the original binding
- changed the file name from vt8500-uart to via,vt8500-uart.yaml
- removed unnecessary alias from the example.
Signed-off-by: Kanak Shilledar <[email protected]>
Acked-by: Alexey Charkov <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add compatible string for serial on MT7988 SoC.
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
SCIF support
Document support for the Serial Communication Interface with FIFO (SCIF)
available in the Renesas RZ/V2H(P) (R9A09G057) SoC. The SCIF interface in
the Renesas RZ/V2H(P) is similar to that available in the RZ/G2L
(R9A07G044) SoC, with the following differences:
- RZ/V2H(P) SoC has three additional interrupts: one for Tx end/Rx ready
and two for Rx and Tx buffer full, all of which are edge-triggered.
- RZ/V2H(P) supports asynchronous mode, whereas RZ/G2L supports both
synchronous and asynchronous modes.
- There are differences in the configuration of certain registers such
as SCSMR, SCFCR, and SCSPTR between the two SoCs.
To handle these differences in the driver, a new SoC-specific compatible
string is added, ensuring proper handling of the unique features and
register configurations of the RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As all the SoCs having multiple interrupts have 'interrupt-names' property
in their respective DTSIs, make 'interrupt-names' property as required
so that we can validate them using dtbs_check.
Signed-off-by: Lad Prabhakar <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This commit adds support to validate the 'interrupts' and 'interrupt-names'
properties for every supported SoC. This ensures proper handling and
configuration of interrupt-related properties across supported platforms.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In preparation for adding more validation checks move the ref for
'serial.yaml' to the end and also move reset check in 'allOf' block.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
StarFive JH7110 SoC
The UART of StarFive JH7110 has two reset signals.
Both of them are necessary for JH7110 to initialize UART.
Signed-off-by: Hal Feng <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Add clock property to enable the clocks required for accessing
QoS configuration registers.
Signed-off-by: Odelu Kukatla <[email protected]>
Acked-by: "Rob Herring (Arm)" <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Georgi Djakov <[email protected]>
|
|
Add dt-bindings for Imagination E5010 JPEG Encoder [1] which is implemented
as stateful V4L2 M2M driver.
The device supports baseline encoding with two different quantization
tables and compression ratio as demanded.
Minimum resolution supported is 64x64 and Maximum resolution supported is
8192x8192.
Link: https://www.ti.com/lit/pdf/spruj16 [1] (Section 7.6 JPEG Encoder)
Co-developed-by: David Huang <[email protected]>
Signed-off-by: David Huang <[email protected]>
Signed-off-by: Devarsh Thakkar <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Sebastian Fricke <[email protected]>
Signed-off-by: Hans Verkuil <[email protected]>
|
|
Dreambox One and Dreambox Two are DVBS/T2 receiver boxes based
on the Amlogic W400 reference board with an S922X chip.
Signed-off-by: Christian Hewitt <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Add a vendor prefix for Dream Property GmbH
Signed-off-by: Christian Hewitt <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Add support for the OSMC Vero 4K Linux-based STB
Signed-off-by: Christian Hewitt <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Neil Armstrong <[email protected]>
|
|
Document a new property (currently only for sa8775p) that describes the
memory region reserved for communicating with the TrustZone.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
Add the compatible for this device.
Signed-off-by: Valeriy Klimin <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The core gains placeholders for recently added functions when
CONFIG_I2C is not defined as well documentation fixes to start using
inclusive terminology.
The drivers get paths in DT bindings fixed as well as proper interrupt
handling for the ocores driver"
* tag 'i2c-for-6.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: summary: be clearer with 'controller/target' and 'adapter/client' pairs
docs: i2c: summary: document 'local' and 'remote' targets
docs: i2c: summary: document use of inclusive language
docs: i2c: summary: update speed mode description
docs: i2c: summary: update I2C specification link
docs: i2c: summary: start sentences consistently.
i2c: Add nop fwnode operations
i2c: ocores: set IACK bit after core is enabled
dt-bindings: i2c: google,cros-ec-i2c-tunnel: correct path to i2c-controller schema
dt-bindings: i2c: atmel,at91sam: correct path to i2c-controller schema
|
|
Add dedicated bindings for the Hisilicon Kirin 960 USB OTG Syscon,
to fully document the block and also fix dtbs_check warning:
hi3660-hikey960.dtb: usb3_otg_bc@ff200000: compatible: ['syscon', 'simple-mfd'] is too short
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
Merge series from David Lechner <[email protected]>:
In the IIO subsystem, we are finding that it is common to call
spi_optimize_message() during driver probe since the SPI message
doesn't change for the lifetime of the driver. This patch adds a
devm_spi_optimize_message() helper to simplify this common pattern.
|
|
Merge series from Kuninori Morimoto <[email protected]>:
This is v3 patch-set for ak4619 driver.
It was created by Khanh, and I updated/adjusted to upstream.
It was tested on Renesas V4M GrayH
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
Merge series from Christian Hewitt <[email protected]>:
Update bindings and add a driver compatible for the pcm5242
chip used on the Odroid HiFi-Shield2 i2c mezzanine board.
|
|
Merge series from Neil Armstrong <[email protected]>:
Convert the text bindings of the Everest ES7241/ES7134/7144/7154 2 channels
I2S analog to digital converter to dt-schema.
|
|
Merge series from Ricard Wanderlof <[email protected]>:
In some cases, depending on system design, the MICBIAS pins on the
chip are not needed as such, but a couple of extra GPIO pins would be
useful. This patch allows the MICBIAS pins to be configured in the
device tree as general purpose output pins, controlled via the GPIO
framework.
Owing to their originally intended purpose there are some limitations:
when the MICBIAS pins are deactivated, they will float, so will likely
need a pulldown in many applications. When activated, they will
assume the voltage specified by the micbias1-vg and micbias2-vg
properties, respectively, meaning that the resulting output voltage
will be 2.0 V, 2.5 V or AVDD .
|
|
IEEE1588(ptp) is optional feature for network. Remove it from required
list to fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: ethernet@f0000: 'ptp-timer' is a required property
Signed-off-by: Frank Li <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Document the MDSS hardware found on the Qualcomm SM7150 platform.
Signed-off-by: Danila Tikhonov <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/599132/
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
|