| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The chip has 3 dual-channel PWM modules PWM_AB, PWM_CD, PWM_EF.
Signed-off-by: George Stark <[email protected]>
Signed-off-by: Dmitry Rokosov <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
On newer SoCs, the PWM hardware can require a power domain to operate
so add corresponding optional property.
Signed-off-by: George Stark <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clock-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Uwe Kleine-König <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Immutable branch between MFD, GPIO and PWM due for the v6.12 merge window
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly continue to rework the thermal core and the thermal zone
driver interface to make the code more straightforward and reduce
bloat
The most significant piece of this work is a change of the code
related to binding cooling devices to thermal zones which, among other
things, replaces two previously existing thermal zone operations with
one allowing driver implementations to be much simpler
There is also a new thermal core testing module allowing mock thermal
zones to be created and controlled via debugfs in order to exercise
the thermal core functionality. It is expected to be used for
implementing thermal core self tests in the future
Apart from the above, there are assorted thermal driver updates
Specifics:
- Update some thermal drivers to eliminate thermal_zone_get_trip()
calls from them and get rid of that function (Rafael Wysocki)
- Update the thermal sysfs code to store trip point attributes in
trip descriptors and get to trip points via attribute pointers
(Rafael Wysocki)
- Move the computation of the low and high boundaries for
thermal_zone_set_trips() to __thermal_zone_device_update() (Daniel
Lezcano)
- Introduce a debugfs-based facility for thermal core testing (Rafael
Wysocki)
- Replace the thermal zone .bind() and .unbind() callbacks for
binding cooling devices to thermal zones with one .should_bind()
callback used for deciding whether or not a given cooling devices
should be bound to a given trip point in a given thermal zone
(Rafael Wysocki)
- Eliminate code that has no more users after the other changes, drop
some redundant checks from the thermal core and clean it up (Rafael
Wysocki)
- Fix rounding of delay jiffies in the thermal core (Rafael Wysocki)
- Refuse to accept trip point temperature or hysteresis that would
lead to an invalid threshold value when setting them via sysfs
(Rafael Wysocki)
- Adjust states of all uninitialized instances in the .manage()
callback of the Bang-bang thermal governor (Rafael Wysocki)
- Drop a couple of redundant checks along with the code depending on
them from the thermal core (Rafael Wysocki)
- Rearrange the thermal core to avoid redundant checks and simplify
control flow in a couple of code paths (Rafael Wysocki)
- Add power domain DT bindings for new Amlogic SoCs (Georges Stark)
- Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr() in the ST
driver and add a Kconfig dependency on THERMAL_OF subsystem for the
STi driver (Raphael Gallais-Pou)
- Simplify the error code path in the probe functions in the brcmstb
driver with the helo of dev_err_probe() (Yan Zhen)
- Make imx_sc_thermal use dev_err_probe() (Alexander Stein)
- Remove trailing space after \n newline in the Renesas driver (Colin
Ian King)
- Add DT binding compatible string for the SA8255p to the tsens
thermal driver (Nikunj Kela)
- Use the devm_clk_get_enabled() helpers to simplify the init routine
in the sprd thermal driver (Huan Yang)
- Remove __maybe_unused notations for the functions by using the new
RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros on the IMx and
Qoriq drivers (Fabio Estevam)
- Remove unused declarations from the ti-soc-thermal driver's header
file as the functions in question were removed previously (Zhang
Zekun)"
* tag 'thermal-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (48 commits)
thermal: core: Drop thermal_zone_device_is_enabled()
thermal: core: Check passive delay in monitor_thermal_zone()
thermal: core: Drop dead code from monitor_thermal_zone()
thermal: core: Drop redundant lockdep_assert_held()
thermal: gov_bang_bang: Adjust states of all uninitialized instances
thermal: sysfs: Add sanity checks for trip temperature and hysteresis
thermal/drivers/imx_sc_thermal: Use dev_err_probe
thermal/drivers/ti-soc-thermal: Remove unused declarations
thermal/drivers/imx: Remove __maybe_unused notations
thermal/drivers/qoriq: Remove __maybe_unused notations
thermal/drivers/sprd: Use devm_clk_get_enabled() helpers
dt-bindings: thermal: tsens: document support on SA8255p
thermal/drivers/renesas: Remove trailing space after \n newline
thermal/drivers/brcmstb_thermal: Simplify with dev_err_probe()
thermal/drivers/sti: Depend on THERMAL_OF subsystem
thermal/drivers/st: Switch from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
dt-bindings: thermal: amlogic,thermal: add optional power-domains
thermal: core: Drop tz field from struct thermal_instance
thermal: core: Drop redundant checks from thermal_bind_cdev_to_trip()
thermal: core: Rename cdev-to-thermal-zone bind/unbind functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"By the number of new lines of code, the most visible change here is
the addition of hybrid CPU capacity scaling support to the
intel_pstate driver. Next are the amd-pstate driver changes related to
the calculation of the AMD boost numerator and preferred core
detection.
As far as new hardware support is concerned, the intel_idle driver
will now handle Granite Rapids Xeon processors natively, the
intel_rapl power capping driver will recognize family 1Ah of AMD
processors and Intel ArrowLake-U chipos, and intel_pstate will handle
Granite Rapids and Sierra Forest chips in the out-of-band (OOB) mode.
Apart from the above, there is a usual collection of assorted fixes
and code cleanups in many places and there are tooling updates.
Specifics:
- Remove LATENCY_MULTIPLIER from cpufreq (Qais Yousef)
- Add support for Granite Rapids and Sierra Forest in OOB mode to the
intel_pstate cpufreq driver (Srinivas Pandruvada)
- Add basic support for CPU capacity scaling on x86 and make the
intel_pstate driver set asymmetric CPU capacity on hybrid systems
without SMT (Rafael Wysocki)
- Add missing MODULE_DESCRIPTION() macros to the powerpc cpufreq
driver (Jeff Johnson)
- Several OF related cleanups in cpufreq drivers (Rob Herring)
- Enable COMPILE_TEST for ARM drivers (Rob Herrring)
- Introduce quirks for syscon failures and use socinfo to get
revision for TI cpufreq driver (Dhruva Gole, Nishanth Menon)
- Minor cleanups in amd-pstate driver (Anastasia Belova, Dhananjay
Ugwekar)
- Minor cleanups for loongson, cpufreq-dt and powernv cpufreq drivers
(Danila Tikhonov, Huacai Chen, and Liu Jing)
- Make amd-pstate validate return of any attempt to update EPP
limits, which fixes the masking hardware problems (Mario
Limonciello)
- Move the calculation of the AMD boost numerator outside of
amd-pstate, correcting acpi-cpufreq on systems with preferred cores
(Mario Limonciello)
- Harden preferred core detection in amd-pstate to avoid potential
false positives (Mario Limonciello)
- Add extra unit test coverage for mode state machine (Mario
Limonciello)
- Fix an "Uninitialized variables" issue in amd-pstste (Qianqiang
Liu)
- Add Granite Rapids Xeon support to intel_idle (Artem Bityutskiy)
- Disable promotion to C1E on Jasper Lake and Elkhart Lake in
intel_idle (Kai-Heng Feng)
- Use scoped device node handling to fix missing of_node_put() and
simplify walking OF children in the riscv-sbi cpuidle driver
(Krzysztof Kozlowski)
- Remove dead code from cpuidle_enter_state() (Dhruva Gole)
- Change an error pointer to NULL to fix error handling in the
intel_rapl power capping driver (Dan Carpenter)
- Fix off by one in get_rpi() in the intel_rapl power capping driver
(Dan Carpenter)
- Add support for ArrowLake-U to the intel_rapl power capping driver
(Sumeet Pawnikar)
- Fix the energy-pkg event for AMD CPUs in the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Add support for AMD family 1Ah processors to the intel_rapl power
capping driver (Dhananjay Ugwekar)
- Remove unused stub for saveable_highmem_page() and remove
deprecated macros from power management documentation (Andy
Shevchenko)
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo)
- Update the maintainers information for the
operating-points-v2-ti-cpu DT binding (Dhruva Gole)
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring)
- Add missing MODULE_DESCRIPTION() macros to devfreq governors (Jeff
Johnson)
- Use devm_clk_get_enabled() in the exynos-bus devfreq driver (Anand
Moon)
- Use of_property_present() instead of of_get_property() in the
imx-bus devfreq driver (Rob Herring)
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin)
- Make cpupower display residency value in idle-info (Aboorva
Devarajan)
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV)
- Add SWIG support to cpupower (John B. Wyatt IV)"
* tag 'pm-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (62 commits)
cpufreq/amd-pstate-ut: Fix an "Uninitialized variables" issue
cpufreq/amd-pstate-ut: Add test case for mode switches
cpufreq/amd-pstate: Export symbols for changing modes
amd-pstate: Add missing documentation for `amd_pstate_prefcore_ranking`
cpufreq: amd-pstate: Add documentation for `amd_pstate_hw_prefcore`
cpufreq: amd-pstate: Optimize amd_pstate_update_limits()
cpufreq: amd-pstate: Merge amd_pstate_highest_perf_set() into amd_get_boost_ratio_numerator()
x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()
x86/amd: Move amd_get_highest_perf() out of amd-pstate
ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn
ACPI: CPPC: Drop check for non zero perf ratio
x86/amd: Rename amd_get_highest_perf() to amd_get_boost_ratio_numerator()
ACPI: CPPC: Adjust return code for inline functions in !CONFIG_ACPI_CPPC_LIB
x86/amd: Move amd_get_highest_perf() from amd.c to cppc.c
PM: hibernate: Remove unused stub for saveable_highmem_page()
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The highlights are support for Arm's "Permission Overlay Extension"
using memory protection keys, support for running as a protected guest
on Android as well as perf support for a bunch of new interconnect
PMUs.
Summary:
ACPI:
- Enable PMCG erratum workaround for HiSilicon HIP10 and 11
platforms.
- Ensure arm64-specific IORT header is covered by MAINTAINERS.
CPU Errata:
- Enable workaround for hardware access/dirty issue on Ampere-1A
cores.
Memory management:
- Define PHYSMEM_END to fix a crash in the amdgpu driver.
- Avoid tripping over invalid kernel mappings on the kexec() path.
- Userspace support for the Permission Overlay Extension (POE) using
protection keys.
Perf and PMUs:
- Add support for the "fixed instruction counter" extension in the
CPU PMU architecture.
- Extend and fix the event encodings for Apple's M1 CPU PMU.
- Allow LSM hooks to decide on SPE permissions for physical
profiling.
- Add support for the CMN S3 and NI-700 PMUs.
Confidential Computing:
- Add support for booting an arm64 kernel as a protected guest under
Android's "Protected KVM" (pKVM) hypervisor.
Selftests:
- Fix vector length issues in the SVE/SME sigreturn tests
- Fix build warning in the ptrace tests.
Timers:
- Add support for PR_{G,S}ET_TSC so that 'rr' can deal with
non-determinism arising from the architected counter.
Miscellaneous:
- Rework our IPI-based CPU stopping code to try NMIs if regular IPIs
don't succeed.
- Minor fixes and cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
perf: arm-ni: Fix an NULL vs IS_ERR() bug
arm64: hibernate: Fix warning for cast from restricted gfp_t
arm64: esr: Define ESR_ELx_EC_* constants as UL
arm64: pkeys: remove redundant WARN
perf: arm_pmuv3: Use BR_RETIRED for HW branch event if enabled
MAINTAINERS: List Arm interconnect PMUs as supported
perf: Add driver for Arm NI-700 interconnect PMU
dt-bindings/perf: Add Arm NI-700 PMU
perf/arm-cmn: Improve format attr printing
perf/arm-cmn: Clean up unnecessary NUMA_NO_NODE check
arm64/mm: use lm_alias() with addresses passed to memblock_free()
mm: arm64: document why pte is not advanced in contpte_ptep_set_access_flags()
arm64: Expose the end of the linear map in PHYSMEM_END
arm64: trans_pgd: mark PTEs entries as valid to avoid dead kexec()
arm64/mm: Delete __init region from memblock.reserved
perf/arm-cmn: Support CMN S3
dt-bindings: perf: arm-cmn: Add CMN S3
perf/arm-cmn: Refactor DTC PMU register access
perf/arm-cmn: Make cycle counts less surprising
perf/arm-cmn: Improve build-time assertion
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu"
"API:
- Make self-test asynchronous
Algorithms:
- Remove MPI functions added for SM3
- Add allocation error checks to remaining MPI functions (introduced
for SM3)
- Set default Jitter RNG OSR to 3
Drivers:
- Add hwrng driver for Rockchip RK3568 SoC
- Allow disabling SR-IOV VFs through sysfs in qat
- Fix device reset bugs in hisilicon
- Fix authenc key parsing by using generic helper in octeontx*
Others:
- Fix xor benchmarking on parisc"
* tag 'v6.12-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (96 commits)
crypto: n2 - Set err to EINVAL if snprintf fails for hmac
crypto: camm/qi - Use ERR_CAST() to return error-valued pointer
crypto: mips/crc32 - Clean up useless assignment operations
crypto: qcom-rng - rename *_of_data to *_match_data
crypto: qcom-rng - fix support for ACPI-based systems
dt-bindings: crypto: qcom,prng: document support for SA8255p
crypto: aegis128 - Fix indentation issue in crypto_aegis128_process_crypt()
crypto: octeontx* - Select CRYPTO_AUTHENC
crypto: testmgr - Hide ENOENT errors
crypto: qat - Remove trailing space after \n newline
crypto: hisilicon/sec - Remove trailing space after \n newline
crypto: algboss - Pass instance creation error up
crypto: api - Fix generic algorithm self-test races
crypto: hisilicon/qm - inject error before stopping queue
crypto: hisilicon/hpre - mask cluster timeout error
crypto: hisilicon/qm - reset device before enabling it
crypto: hisilicon/trng - modifying the order of header files
crypto: hisilicon - add a lock for the qp send operation
crypto: hisilicon - fix missed error branch
crypto: ccp - do not request interrupt on cmd completion when irqs disabled
...
|
|
Alexandre Ghiti <[email protected]> says:
In RISC-V, after a new mapping is established, a sfence.vma needs to be
emitted for different reasons:
- if the uarch caches invalid entries, we need to invalidate it otherwise
we would trap on this invalid entry,
- if the uarch does not cache invalid entries, a reordered access could fail
to see the new mapping and then trap (sfence.vma acts as a fence).
We can actually avoid emitting those (mostly) useless and costly sfence.vma
by handling the traps instead:
- for new kernel mappings: only vmalloc mappings need to be taken care of,
other new mapping are rare and already emit the required sfence.vma if
needed.
That must be achieved very early in the exception path as explained in
patch 3, and this also fixes our fragile way of dealing with vmalloc faults.
- for new user mappings: Svvptc makes update_mmu_cache() a no-op but we can
take some gratuitous page faults (which are very unlikely though).
Patch 1 and 2 introduce Svvptc extension probing.
On our uarch that does not cache invalid entries and a 6.5 kernel, the
gains are measurable:
* Kernel boot: 6%
* ltp - mmapstress01: 8%
* lmbench - lat_pagefault: 20%
* lmbench - lat_mmap: 5%
Here are the corresponding numbers of sfence.vma emitted:
* Ubuntu boot to login:
Before: ~630k sfence.vma
After: ~200k sfence.vma
* ltp - mmapstress01
Before: ~45k
After: ~6.3k
* lmbench - lat_pagefault
Before: ~665k
After: 832 (!)
* lmbench - lat_mmap
Before: ~546k
After: 718 (!)
Thanks to Ved and Matt Evans for triggering the discussion that led to
this patchset!
* b4-shazam-merge:
riscv: Stop emitting preventive sfence.vma for new userspace mappings with Svvptc
riscv: Stop emitting preventive sfence.vma for new vmalloc mappings
dt-bindings: riscv: Add Svvptc ISA extension description
riscv: Add ISA extension parsing for Svvptc
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Add description for the Svvptc ISA extension which was ratified recently.
Signed-off-by: Alexandre Ghiti <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.12
This is a very large set of changes, almost all in drivers rather than
the core. Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).
Highlights include:
- More simplifications and cleanups throughout the subsystem from
Morimoto-san.
- Extensive cleanups and refactoring of the Soundwire drivers to make
better use of helpers.
- Removal of Intel machine support obsoleted by the AVS driver.
- Lots of DT schema conversions.
- Machine support for many AMD and Intel x86 platforms.
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
SoundWire and rev C, and Texas Instruments TAS2563
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- btusb: Add MediaTek MT7925-B22M support ID 0x13d3:0x3604
- btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
- btrtl: Add the support for RTL8922A
- btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
- btnxpuart: Add support for ISO packets
- btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
- btsdio: Do not bind to non-removable CYW4373
- hci_uart: Add support for Amlogic HCI UART
* tag 'for-net-next-2024-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (27 commits)
Bluetooth: btintel_pcie: Allocate memory for driver private data
Bluetooth: btusb: Fix not handling ZPL/short-transfer
Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)
Bluetooth: btsdio: Do not bind to non-removable CYW4373
Bluetooth: hci_sync: Ignore errors from HCI_OP_REMOTE_NAME_REQ_CANCEL
Bluetooth: CMTP: Mark BT_CMTP as DEPRECATED
Bluetooth: replace deprecated strncpy with strscpy_pad
Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED
Bluetooth: btrtl: Set msft ext address filter quirk for RTL8852B
Bluetooth: Use led_set_brightness() in LED trigger activate() callback
Bluetooth: btrtl: Use kvmemdup to simplify the code
Bluetooth: btusb: Add Mediatek MT7925 support ID 0x13d3:0x3608
Bluetooth: btrtl: Add the support for RTL8922A
Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
Bluetooth: hci_conn: Remove redundant memset after kzalloc
Bluetooth: L2CAP: Remove unused declarations
dt-bindings: bluetooth: bring the HW description closer to reality for wcn6855
Bluetooth: btnxpuart: Add support for ISO packets
Bluetooth: hci_h4: Add support for ISO packets in h4_recv.h
Bluetooth: btusb: Add Realtek RTL8852C support ID 0x0489:0xe122
...
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 756485bfbb85 ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to
dedicated schema") incorrectly removed 'vddpe-3v3-supply' from the
bindings, which results in DT checker warnings like:
arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dtb: pcie@600000: Unevaluated properties are not allowed ('vddpe-3v3-supply' was unexpected)
from schema $id: http://devicetree.org/schemas/pci/qcom,pcie.yaml#
Note that this property has been part of the Qualcomm PCIe bindings since
2018 and would need to be deprecated rather than simply removed if there is
a desire to replace it with 'vpcie3v3' which is used for some non-Qualcomm
controllers.
Link: https://lore.kernel.org/lkml/[email protected]/
Fixes: 756485bfbb85 ("dt-bindings: PCI: qcom,pcie-sc7280: Move SC7280 to dedicated schema")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
|
|
"nvidia,tegra186-ccplex-cluster" is also documented in
arm/tegra/nvidia,tegra-ccplex-cluster.yaml. As it covers Tegra234 as
well, drop nvidia,tegra186-ccplex-cluster.yaml.
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The compatible strings for mt6795 clocks are also documented in other
schemas:
"mediatek,mt6795-apmixedsys" in clock/mediatek,apmixedsys.yaml
"mediatek,mt6795-topckgen" in clock/mediatek,topckgen.yaml
"mediatek,mt6795-pericfg" in clock/mediatek,pericfg.yaml
"mediatek,mt6795-infracfg" in clock/mediatek,infracfg.yaml
The only difference is #reset-cells is not allowed in some of these,
but that aligns with actual users in .dts files.
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
"make dtbs_check":
arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb: clock-generator@6a: 'idt,shutdown' is a required property
From schema: Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb: clock-generator@6a: 'idt,output-enable-active' is a required property
From schema: Documentation/devicetree/bindings/clock/idt,versaclock5.yaml
Versaclock 5 clock generators can have their configuration stored in
One-Time Programmable (OTP) memory. Hence there is no need to specify
DT properties for manual configuration if the OTP has been programmed
before. Likewise, the Linux driver does not touch the SD/OE bits if the
corresponding properties are not specified, cfr. commit d83e561d43bc71e5
("clk: vc5: Add properties for configuring SD/OE behavior").
Reflect this in the bindings by making the "idt,shutdown" and
"idt,output-enable-active" properties not required, just like the
various "idt,*" properties in the per-output child nodes.
Fixes: 275e4e2dc0411508 ("dt-bindings: clk: vc5: Add properties for configuring the SD/OE pin")
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Luca Ceresoli <[email protected]>
Link: https://lore.kernel.org/r/68037ad181991fe0b792f6d003e3e9e538d5ffd7.1673452118.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add a compatible for the SA8255p platform's KPSS watchdog.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Nikunj Kela <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add an entry to fsl,imx8qm-irqsteer.
This fixes the following dt-schema warning:
failed to match any schema with compatible: ['fsl,imx8qm-irqsteer', 'fsl,imx-irqsteer']
Signed-off-by: Fabio Estevam <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
LPC32XX SoCs use pl080 dma controller which have few request signals
multiplexed between peripherals. This binding describes how devices can
use the multiplexed request signals.
Signed-off-by: Piotr Wojtaszczyk <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
"maxim,max1237" is already documented in iio/adc/maxim,max1238.yaml, so
drop it from trivial-devices.yaml.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Drop LM75 compatible devices which are already documented in lm75.yaml.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The correct vendor prefix for Analog Devices is "adi", not "ad". Both
forms are in use. Add the "adi,ad7414" version and deprecate the
"ad,ad7414" version.
Keep them together even though it breaks strict alphabetical ordering.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
"at,24c08" does not have a correct vendor prefix. The correct compatible
string would be "atmel,24c08" which is already documented in at24.yaml.
It is also unused anywhere, so just drop it.
"st,24c256" is already documented in at24.yaml, so drop it as well.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
commit 53ed3233e6b5 ("dt-bindings: input: qcom,pm8921-keypad: convert to
YAML format") resulted in a renaming of the output .txt file from
qcom,pm8xxx-keypad.txt to qcom,pm8921-keypad.yaml.
This patch makes a corresponding update to the link to that .txt file
in wakeup-source.txt.
Flagged by make htmldocs:
Warning: Documentation/devicetree/bindings/power/wakeup-source.txt references a file that doesn't exist: Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
Signed-off-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Add compatible for pdc interrupt controller representing support on
SA8255p.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Nikunj Kela <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Kuan-Wei Chiu <[email protected]>
Reviewed-by: Matti Vaittinen <[email protected]>
Signed-off-by: Yu-Chun Lin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
- Add support for one new Elan device (ekth6a12nay) (Zhaoxiong Lv)
|
|
Endpoint
Add reg-name: "dbi2", "atu" for i.MX8M PCIe Endpoint.
For i.MX8M PCIe EP, the dbi2 and atu addresses are pre-defined in the
driver. This method is not good.
In commit b7d67c6130ee ("PCI: imx6: Add iMX95 Endpoint (EP) support"),
Frank suggests to fetch the dbi2 and atu from DT directly. This commit is
preparation to do that for i.MX8M PCIe EP.
These changes wouldn't break driver function. When "dbi2" and "atu"
properties are present, i.MX PCIe driver would fetch the according base
addresses from DT directly. If only two reg properties are provided, i.MX
PCIe driver would fall back to the old method.
Link: https://lore.kernel.org/linux-pci/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Reviewed-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
|
|
Convert the devicetree bindings for the Altera PCIe MSI controller
from text to YAML.
Link: https://lore.kernel.org/linux-pci/[email protected]
Signed-off-by: Matthew Gerlach <[email protected]>
[kwilczynski: remove unused msi0 label]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
|
|
into next
|
|
Document SA8255p compatible for the True Random Number Generator.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Nikunj Kela <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts (sort of) and no adjacent changes.
This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock")
from net, as it was superseded by
commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.")
in net-next.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
There is a recently notified BT regression with no fix yet. I do not
think a fix will land in the next week.
Current release - regressions:
- core: tighten bad gso csum offset check in virtio_net_hdr
- netfilter: move nf flowtable bpf initialization in
nf_flow_table_module_init()
- eth: ice: stop calling pci_disable_device() as we use pcim
- eth: fou: fix null-ptr-deref in GRO.
Current release - new code bugs:
- hsr: prevent NULL pointer dereference in hsr_proxy_announce()
Previous releases - regressions:
- hsr: remove seqnr_lock
- netfilter: nft_socket: fix sk refcount leaks
- mptcp: pm: fix uaf in __timer_delete_sync
- phy: dp83822: fix NULL pointer dereference on DP83825 devices
- eth: revert "virtio_net: rx enable premapped mode by default"
- eth: octeontx2-af: Modify SMQ flush sequence to drop packets
Previous releases - always broken:
- eth: mlx5: fix bridge mode operations when there are no VFs
- eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock"
* tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
net: libwx: fix number of Rx and Tx descriptors
net: dsa: felix: ignore pending status of TAS module when it's disabled
net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()
selftests: mptcp: include net_helper.sh file
selftests: mptcp: include lib.sh file
selftests: mptcp: join: restrict fullmesh endp on 1st sf
netfilter: nft_socket: make cgroupsv2 matching work with namespaces
netfilter: nft_socket: fix sk refcount leaks
MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER
dt-bindings: net: tja11xx: fix the broken binding
selftests: net: csum: Fix checksums for packets with non-zero padding
net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices
virtio_net: disable premapped mode by default
Revert "virtio_net: big mode skip the unmap check"
Revert "virtio_net: rx remove premapped failover code"
...
|
|
Document Audio Graph Port support in binding document.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Document DMA support in binding document.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add YAML bindings for ep93xx SoC keypad.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add YAML bindings for ep93xx SoC PATA.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Damien Le Moal <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add YAML bindings for ts7200 NAND Controller.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add YAML bindings for ep93xx SoC Ethernet Controller.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add YAML bindings for ep93xx SoC SPI.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add YAML bindings for ep93xx SoC PWM.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Uwe Kleine-König <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add YAML bindings for ep93xx SoC DMA.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Add device tree bindings for the Cirrus Logic EP93xx SoC.
Signed-off-by: Nikita Shubin <[email protected]>
Tested-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Acked-by: Miquel Raynal <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Qualcomm QCS8300 SoC includes apps smmu that implements arm,mmu-500, which
is used to translate device-visible virtual addresses to physical
addresses. Add compatible for it.
Signed-off-by: Zhenhua Huang <[email protected]>
Signed-off-by: Jingyi Wang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
A patch for Qualcomm depends on some fixes.
|
|
bootloader-backdoor-gpio (along with reset-gpio) is used to enable
bootloader backdoor for flashing new firmware.
The pin and pin level to enable bootloader backdoor is configured using
the following CCFG variables in cc1352p7:
- SET_CCFG_BL_CONFIG_BL_PIN_NO
- SET_CCFG_BL_CONFIG_BL_LEVEL
Acked-by: Conor Dooley <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Ayush Singh <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The LAN8650/1 combines a Media Access Controller (MAC) and an Ethernet
PHY to enable 10BASE-T1S networks. The Ethernet Media Access Controller
(MAC) module implements a 10 Mbps half duplex Ethernet MAC, compatible
with the IEEE 802.3 standard and a 10BASE-T1S physical layer transceiver
integrated into the LAN8650/1. The communication between the Host and the
MAC-PHY is specified in the OPEN Alliance 10BASE-T1x MACPHY Serial
Interface (TC6).
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: Parthiban Veerasooran <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Several compatibles documented in trivial-rtc.yaml are documented
elsewhere and are not trivial, so drop them.
Signed-off-by: Rob Herring (Arm) <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Link: https://www.dfrobot.com/about-us
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Tóth János <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Add the necessary documentation for SD2405AL.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Tóth János <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|