aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree
AgeCommit message (Collapse)AuthorFilesLines
2023-04-14Merge tag 'sunxi-dt-for-6.4-1' of ↵Arnd Bergmann3-0/+27
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - added D1 crypto node - enabled DVFS on OrangePi PC2 board - added GPIO line names on Nezha D1 board - added suniv USB nodes and enabled on licheepi-nano - new suniv boards: PopStick v1.1 and Lctech Pi - added Allwinner T113-s DTSI - added MangoPi MQ-R T113-s board variant - swapped DMA names for A23, A31, A33, D1, H3, H5, V3s * tag 'sunxi-dt-for-6.4-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: riscv: dts: allwinner: d1: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: h3/h5: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: v3s: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun8i: a23/a33: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes ARM: dts: sunxi: add MangoPi MQ-R-T113 board dt-bindings: arm: sunxi: document MangoPi MQ-R board names ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi dts: add riscv include prefix link ARM: dts: suniv: Add Lctech Pi F1C200s devicetree ARM: dts: suniv: add device tree for PopStick v1.1 dt-binding: arm: sunxi: add two board compatible strings dt-bindings: vendor-prefixes: add Source Parts and Lctech names ARM: dts: suniv: licheepi-nano: enable USB ARM: dts: suniv: add USB-related device nodes riscv: dts: nezha-d1: add gpio-line-names arm64: dts: allwinner: h5: OrangePi PC2: add OPP table to enable DVFS riscv: dts: allwinner: d1: Add crypto engine node Link: https://lore.kernel.org/r/20230408125156.GA17050@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'imx-bindings-6.4' of ↵Arnd Bergmann9-10/+102
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX dt-bindings update for 6.4: - Add vendor prefix for chargebyte. - A bunch of new board compatibles: Tolino Vision, Toradex Apalis, chargebyte Tarragon, i.MX8M Plus based boards from DH electronics and Data Modul, etc. - A series from Marek Vasut to improve blk-ctrl bindings. * tag 'imx-bindings-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBC dt-bindings: arm: fsl: Add chargebyte Tarragon dt-bindings: vendor-prefixes: add chargebyte dt-bindings: soc: imx-blk-ctrl: Drop leading label in blk-ctrl in examples dt-bindings: soc: imx8m-blk-ctrl: Rename blk_ctrl to blk-ctrl in examples dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM on PDK3 dt-bindings: arm: fsl: add compatible string for Tolino Vision dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and Pegasus+ dt-bindings: arm: fsl: Add colibri-imx8x carrier boards dt-bindings: soc: imx8mp-media-blk-ctrl: Add LDB subnode into schema and example dt-bindings: soc: imx8mp-media-blk-ctrl: Align block controller example name dt-bindings: arm: fsl: Fix copy-paste error in comment dt-bindings: arm: fsl: add toradex,apalis-imx8 et al.
2023-04-14Merge tag 'riscv-dt-for-v6.4' of ↵Arnd Bergmann5-0/+214
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt RISC-V Devicetrees for v6.4 Microchip: A "fix" for the system controller's regs on PolarFire SoC, adding a missing reg property. The patch had been sitting there for months and I only re-found it recently, so you can guess how much of a "fix" it actually is. It'll become needed when the system controller's QSPI gets added in the future, but at present there's no urgency as the driver can handle both the current and "fixed" versions. StarFive: Basic support for the JH7110 & the associated first-party dev board, the VisionFive v2 (in two forms). There's a bunch of dt-bindings required for this too, all of which have had input from the DT folk. There's enough in this tag to boot to a console w/ an initramfs but little more. The SoC supports some of the "new" bit manipulation instructions, which is a good test for the recently added Zbb support in the kernel. Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree riscv: dts: starfive: Add StarFive JH7110 pin function definitions riscv: dts: starfive: Add initial StarFive JH7110 device tree dt-bindings: riscv: Add SiFive S7 compatible dt-bindings: interrupt-controller: Add StarFive JH7110 plic dt-bindings: timer: Add StarFive JH7110 clint dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generator dt-bindings: clock: Add StarFive JH7110 system clock and reset generator riscv: dts: microchip: fix the mpfs' mailbox regs riscv: dts: microchip: add mpfs specific macb reset support Link: https://lore.kernel.org/r/20230406-shank-impromptu-3d483bbc249f@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'tegra-for-6.4-arm64-dt' of ↵Arnd Bergmann1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree changes for v6.4-rc1 This adds support for the Jetson Orin NX and includes updates for Jetson AGX Orin (audio codec, USB Type-C support). * tag 'tegra-for-6.4-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Add vccmq on Jetson TX2 arm64: tegra: Populate USB Type-C Controller for Jetson AGX Orin arm64: tegra: Audio codec support on Jetson AGX Orin arm64: tegra: Support Jetson Orin NX reference platform arm64: tegra: Support Jetson Orin NX dt-bindings: tegra: Document Jetson Orin NX reference platform dt-bindings: tegra: Document Jetson Orin NX arm64: tegra: Add DSU PMUs for Tegra234 arm64: tegra: Drop serial clock-names and reset-names Link: https://lore.kernel.org/r/20230406124804.970394-6-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'tegra-for-6.4-dt-bindings' of ↵Arnd Bergmann9-22/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt dt-bindings: Changes for v6.4-rc1 This is a single patch that drops unneeded quotes from various Tegra- related device tree bindings. * tag 'tegra-for-6.4-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: dt-bindings: arm: nvidia: Drop unneeded quotes Link: https://lore.kernel.org/r/20230406124804.970394-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'asahi-soc-dt-6.4' of https://github.com/AsahiLinux/linux into soc/dtArnd Bergmann13-7/+56
Apple SoC DT updates for 6.4. This time we have the M2 (t8112) device trees and compatible updates, as well as a minor fix for PCIe ports on the prior models. * tag 'asahi-soc-dt-6.4' of https://github.com/AsahiLinux/linux: arm64: dts: apple: t600x: Disable unused PCIe ports arm64: dts: apple: t8103: Disable unused PCIe ports arm64: dts: apple: t8112: Initial t8112 (M2) device trees dt-bindings: arm: apple: Add t8112 j413/j473/j493 compatibles dt-bindings: clock: apple,nco: Add t8112-nco compatible dt-bindings: i2c: apple,i2c: Add apple,t8112-i2c compatible dt-bindings: pinctrl: apple,pinctrl: Add apple,t8112-pinctrl compatible dt-bindings: pci: apple,pcie: Add t8112 support dt-bindings: nvme: apple: Add apple,t8112-nvme-ans2 compatible string dt-bindings: mailbox: apple,mailbox: Add t8112 compatibles dt-bindings: iommu: apple,sart: Add apple,t8112-sart compatible string dt-bindings: interrupt-controller: apple,aic2: Add apple,t8112-aic compatible dt-bindings: arm: cpus: Add apple,avalanche & blizzard compatibles dt-bindings: watchdog: apple,wdt: Add t8112-wdt compatible dt-bindings: arm: apple: apple,pmgr: Add t8112-pmgr compatible dt-bindings: power: apple,pmgr-pwrstate: Add t8112 compatible Link: https://lore.kernel.org/r/7263df01-aebc-2db5-f074-4805e0ae9fbc@marcan.st Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'samsung-dt-6.4' of ↵Arnd Bergmann1-2/+21
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM changes for v6.4 1. Several cleanups and improvements as a result of dtbs_checks: align node names with bindings, drop incorrect properties, fix clock-names, add missing "ports" node. 2. Move DP and MIPI phys to PMU node (DTS with binding change). 3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was selected by the driver based on the MSHC alias) and add generic MMC aliases in each board. The aliases match known numbering in the schematics. * tag 'samsung-dt-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and Exynos4 ARM: dts: exynos: add mmc aliases ARM: dts: exynos: replace mshc0 alias with mmc-ddr-1_8v property ARM: dts: exynos: fix MCT compatible in Universal C210 ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5250 ARM: dts: exynos: move DP and MIPI phys to PMU node in Exynos5420 ARM: dts: exynos: move MIPI phy to PMU node in Exynos4 ARM: dts: exynos: move MIPI phy to PMU node in Exynos3250 ARM: dts: exynos: drop unused samsung,camclk-out property in Midas ARM: dts: s5pv210: correct MIPI CSIS clock name ARM: dts: exynos: correct whitespace in Midas ARM: dts: exynos: fix WM8960 clock name in Itop Elite ARM: dts: exynos: add ports to TC358764 bridge on Arndale ARM: dts: exynos: drop fake align STMPE properties in P4 Note ARM: dts: exynos: align STMPE ADC node name with bindings in P4 Note Link: https://lore.kernel.org/r/20230405080438.156805-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-14Merge tag 'samsung-dt64-6.4' of ↵Arnd Bergmann1-0/+19
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.4 1. Exynos850: add headers with AUD, G3D and HSI clock controller clock IDs. Add G3D (GPU) clock controller node. 2. Exynos5433: fixes for dtbs_check: move MIPI phy to PMU node. 3. Drop old MSHC aliases (while adding proper mmc-ddr-1_8v which was selected by the driver based on the MSHC alias) and add generic MMC aliases in each board. The aliases match known numbering in the schematics. * tag 'samsung-dt64-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: add mmc aliases arm64: dts: exynos: drop mshc aliases arm64: dts: exynos: Add CMU_G3D node for Exynos850 SoC arm64: dts: exynos: move MIPI phy to PMU node in Exynos5433 dt-bindings: clock: exynos850: Add AUD and HSI main gate clocks dt-bindings: clock: exynos850: Add Exynos850 CMU_G3D Link: https://lore.kernel.org/r/20230405080438.156805-1-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-12dt-bindings: arm: Add Data Modul i.MX8M Plus eDM SBCMarek Vasut1-0/+1
Add DT compatible for Data Modul i.MX8M Plus eDM SBC board. This is an evaluation board for various custom display units. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-04-12dt-bindings: arm: fsl: Add chargebyte TarragonStefan Wahren1-0/+9
This adds the compatibles for the chargebyte Tarragon boards. Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-04-12dt-bindings: vendor-prefixes: add chargebyteStefan Wahren1-0/+2
chargebyte supplies hardware and software products for all aspects of charging communication. https://chargebyte.com/ Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-04-05dt-bindings: riscv: Add SiFive S7 compatibleHal Feng1-0/+1
Add a new compatible string in cpu.yaml for SiFive S7 CPU core which is used on SiFive U74-MC core complex etc. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05dt-bindings: interrupt-controller: Add StarFive JH7110 plicEmil Renner Berthing1-0/+1
Add compatible string for StarFive JH7110 plic. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05dt-bindings: timer: Add StarFive JH7110 clintEmil Renner Berthing1-0/+1
Add compatible string for the StarFive JH7110 clint. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05dt-bindings: clock: Add StarFive JH7110 always-on clock and reset generatorEmil Renner Berthing1-0/+107
Add bindings for the always-on clock and reset generator (AONCRG) on the JH7110 RISC-V SoC by StarFive Ltd. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05dt-bindings: clock: Add StarFive JH7110 system clock and reset generatorEmil Renner Berthing1-0/+104
Add bindings for the system clock and reset generator (SYSCRG) on the JH7110 RISC-V SoC by StarFive Ltd. Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Hal Feng <hal.feng@starfivetech.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-04-05dt-bindings: soc: samsung: exynos-pmu: allow phys as child on Exynos3 and ↵Krzysztof Kozlowski1-2/+21
Exynos4 Just like on Exynos5250, Exynos5420 and Exynos5433 the MIPI phy is actually part of the Power Management Unit system controller thus allow it as PMU's child. Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230207192851.549242-1-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2023-04-04Merge tag 'amlogic-arm64-dt-for-v6.4' of ↵Arnd Bergmann1-0/+10
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT changes for v6.4: - set of DT bindings check fixes - adjust order of some compatibles to match dt-schema migration - add support for BananaPi M2S variants - gxbb-kii-pro: add audio & bluetooth support - meson-a1: add gpio_intc node - gxl: use gxl mdio multiplexer - Add initial support for BPI-CM4 module with BPI-CM4IO baseboard * tag 'amlogic-arm64-dt-for-v6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard dt-bindings: arm: amlogic: Document the boards with the BPI-CM4 connected arm64: dts: amlogic: gxl: use gxl mdio multiplexer arm64: dts: meson-a1: add gpio_intc node arm64: dts: meson: gxbb-kii-pro: add initial audio support arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts arm64: dts: meson: adjust order of some compatibles arm64: dts: meson: add support for BananaPi M2S variants dt-bindings: arm: amlogic: add support for BananaPi M2S variants arm64: dts: amlogic: meson-gxm-s912-libretech-pc: remove unused pinctrl-names from phy node arm64: dts: amlogic: meson-sm1: use correct enable-gpios arm64: dts: amlogic: meson-s4: fix apb4 bus node name arm64: dts: amlogic: meson-g12b-odroid-go-ultra: rename keypad-gpio pinctrl node arm64: dts: amlogic: meson-g12b-radxa-zero2: fix pwm clock names arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: remove invalid #gpio-cells in onewire node arm64: dts: amlogic: meson-gxm-s912-libretech-pc: add simple connector node in fusb302 node arm64: dts: amlogic: meson-sm1-bananapi: correct usb-hub hog node name Link: https://lore.kernel.org/r/1b955bb7-1a35-8d67-beb6-dd289533ff6f@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-04dt-bindings: arm: oxnas: remove obsolete bindingsNeil Armstrong1-14/+0
Due to lack of maintainance and stall of development for a few years now, and since no new features will ever be added upstream, remove the OX810 and OX820 SoC and boards bindings. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-04Merge tag 'omap-for-v6.4/dt-signed' of ↵Arnd Bergmann1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt Devicetree changes for omaps for v6.4 Devicetree changes for omaps for gta04, Phytec am335x devices, and to drop a obsolete compatible property: - A non-urgent fix for gta04 to enable more dma channels for some audio configurations - Update the dts compatible and vendor prefixes for gta04 - A series of updates for Phytec am335x based boards to configure more devices like rtc and audio, and a few clean-up patches - A change to drop the usage of "ti,omap36xx" compatible, the driver code already checks for "ti,omap3630" that is also alread set in the dts files. This makes the yaml binding conversion a bit simpler. * tag 'omap-for-v6.4/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap: Drop ti,omap36xx compatible ARM: dts: am335x-phycore-som: Remove superseded/invalid GPMC NAND type. ARM: dts: am335x-pcm-953: Remove superseded/invalid LED trigger. ARM: dts: am335x-phycore-som: Remove underscore in node names. ARM: dts: am335x-regor: Remove underscore in node names. ARM: dts: am335x-pcm-935: Remove underscore in node names. ARM: dts: am335x-wega: Change node name of sound card, remove underscores. ARM: dts: am335x-wega: Fix audio codec by using simple-audio-card driver. ARM: dts: am335x-phycore-som: Add alias for TPS65910 RTC ARM: dts: omap3-gta04: fix compatible record for GTA04 board ARM: dts: gta04: fix excess dma channel usage Link: https://lore.kernel.org/r/pull-1680180389-756753@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-04dt-bindings: arm: nvidia: Drop unneeded quotesRob Herring9-22/+22
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-04-04dt-bindings: tegra: Document Jetson Orin NX reference platformThierry Reding1-0/+5
Document the combination of the P3768 carrier board with the P3767 (Jetson Orin NX) module. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-04-04dt-bindings: tegra: Document Jetson Orin NXThierry Reding1-0/+4
The Jetson Orin NX is the latest iteration in the NX family of Jetson products. Document the compatible strings used for these devices. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2023-03-28dt-bindings: arm: apple: Add t8112 j413/j473/j493 compatiblesJanne Grunau1-0/+15
This adds the following apple,t8112 platforms: - apple,j413 - MacBook Air (M2, 2022) - apple,j473 - Mac mini (M2, 2023) - apple,j493 - MacBook Pro (13-inch, M2, 2022) The sort order logic here is having SoC numeric code families in release order, and SoCs within each family in release order: - t8xxx (Apple HxxP/G series, "phone"/"tablet" chips) - t8103 (Apple H13G/M1) - t8112 (Apple H14G/M2) - t6xxx (Apple HxxJ series, "desktop" chips) - t6000 (Apple H13J(S)/M1 Pro) - t6001 (Apple H13J(C)/M1 Max) - t6002 (Apple H13J(D)/M1 Ultra) Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: clock: apple,nco: Add t8112-nco compatibleJanne Grunau1-0/+1
The block found on Apple's M2 SoC is compatible with the existing driver so add its per-SoC compatible. Acked-by: Martin Povišer <povik+lin@cutebit.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: i2c: apple,i2c: Add apple,t8112-i2c compatibleJanne Grunau1-0/+1
This block on the Apple M2 is compatible with the existing driver so just add the per-SoC compatible. Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: pinctrl: apple,pinctrl: Add apple,t8112-pinctrl compatibleJanne Grunau1-0/+1
This new SoC uses the same pinctrl hardware, so just add a new per-SoC compatible. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: pci: apple,pcie: Add t8112 supportJanne Grunau1-0/+1
The block found in the Apple M2 SoC is compatible with the existing driver, and supports 4 downstream ports like the t6000 one. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: nvme: apple: Add apple,t8112-nvme-ans2 compatible stringJanne Grunau1-1/+4
"apple,t8112-nvme-ans2" as found on Apple M2 SoCs is compatible with the existing driver. Add its SoC specific compatible string to allow special handling if it'll be necessary. t8112 uses only 2 power-domains as no 4 and 8 TB configurations are offered. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: mailbox: apple,mailbox: Add t8112 compatiblesJanne Grunau1-0/+2
The mailbox hardware remains unchanged on M2 SoCs so just add its per-SoC compatible. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: iommu: apple,sart: Add apple,t8112-sart compatible stringJanne Grunau1-3/+7
"apple,t8112-sart" as found on the Apple M2 SoC appears to be SART3 as well. To allow for later discovered incompatibilities use '"apple,t8112-sart", "apple,t6000-sart"' as compatible string. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: interrupt-controller: apple,aic2: Add apple,t8112-aic compatibleJanne Grunau1-3/+19
The Apple M2 SoC uses AICv2 and is compatible with the existing driver. Add its per-SoC compatible. Since multi-die versions of the M2 are not expected decrease '#interrupt-cells' to 3 for apple,t8112-aic. This is seamlessly handled inside the driver. Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: arm: cpus: Add apple,avalanche & blizzard compatiblesJanne Grunau1-0/+2
These are the CPU cores in the Apple silicon M2 SoC. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: watchdog: apple,wdt: Add t8112-wdt compatibleJanne Grunau1-0/+1
The block on the Apple M2 SoC is compatible with the existing driver so add its per-SoC compatible. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: arm: apple: apple,pmgr: Add t8112-pmgr compatibleJanne Grunau1-0/+1
The block on Apple M2 SoCs is compatible with the existing driver so just add its per-SoC compatible. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-28dt-bindings: power: apple,pmgr-pwrstate: Add t8112 compatibleHector Martin1-0/+1
Add the apple,t8112-pmgr-pwrstate compatible for the Apple M2 SoC. This goes after t8103. The sort order logic here is having SoC numeric code families in release order, and SoCs within each family in release order: - t8xxx (Apple HxxP/G series, "phone"/"tablet" chips) - t8103 (Apple H13G/M1) - t8112 (Apple H14G/M2) - t6xxx (Apple HxxJ series, "desktop" chips) - t6000 (Apple H13J(S)/M1 Pro) - t6001 (Apple H13J(C)/M1 Max) - t6002 (Apple H13J(D)/M1 Ultra) Note that t600[0-2] share the t6000 compatible where the hardware is 100% compatible, which is usually the case in this highly related set of SoCs. Reviewed-by: Janne Grunau <j@jannau.net> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Janne Grunau <j@jannau.net> Signed-off-by: Hector Martin <marcan@marcan.st>
2023-03-27dt-bindings: arm: sunxi: document MangoPi MQ-R board namesAndre Przywara2-0/+10
The MangoPi MQ-R board is a small development board, using Allwinner SoCs with co-packaged DRAM. There are versions with a RISC-V core and ones with two Arm Cortex-A7 cores. Add the board/SoC compatible string pair to the list of known boards. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230320005249.13403-4-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-03-27ARM: dts: omap3-gta04: fix compatible record for GTA04 boardH. Nikolaus Schaller1-0/+4
Vendor of the GTA04 boards is and always was Golden Delicious Computers GmbH&Co. KG, Germany and not Texas Instruments. Maybe, TI was references here because the GTA04 was based on the BeagleBoard design which is designated as "ti,omap3-beagle". While we are looking at vendors of omap3 based devices, we also add the record for OpenPandora. The DTS files for the pandora device already make use of it. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Message-Id: <38b49aad0cf33bb5d6a511edb458139b58e367fd.1676566002.git.hns@goldelico.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2023-03-27dt-bindings: soc: imx-blk-ctrl: Drop leading label in blk-ctrl in examplesMarek Vasut6-6/+6
Drop the leading label in block controller examples, it is unused. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27dt-bindings: soc: imx8m-blk-ctrl: Rename blk_ctrl to blk-ctrl in examplesMarek Vasut2-2/+2
Rename blk_ctrl@ to blk-ctrl (with dash instead of underscore) in examples so that they would match the imx8m[mn].dtsi in current Linux kernel. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27dt-bindings: arm: Add DH electronics i.MX8M Plus DHCOM on PDK3Marek Vasut1-1/+3
Add DT compatible string for DH electronics i.MX8M Plus DHCOM on PDK3 evaluation board into YAML DT binding document. This setup is a general purpose SoM evaluation board. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27dt-bindings: arm: fsl: add compatible string for Tolino VisionAndreas Kemnade1-0/+1
Add a compatible string for the Tolino Vision eBook reader. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27dt-bindings: arm: fsl: Add Y Soft IOTA Phoenix, Lynx, Pegasus and Pegasus+Michal Vokáč1-0/+4
These i.MX6 boards are based on a facelifted PCB from the previous designs. Routing for some unused parts was completely removed (uSD card, PCIe, audio codec) and some new parts were added (supercap backed RTC, secure element, PWM audio, GPIO button). Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-27dt-bindings: arm: fsl: Add colibri-imx8x carrier boardsPhilippe Schenker1-1/+4
Prepare the dt-bindings for the new colibri-imx8x carrier-boards Aster and Iris. The Toradex SoM standard is called Colibri, fix the typo. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-23dt-binding: arm: sunxi: add two board compatible stringsIcenowy Zheng1-0/+13
The SourceParts PopStick is a F1C200s-based stick-shaped SBC. The publicly released version is actually v1.1. The Lctech Pi F1C200s is a small development board using the Allwinner F1C200s SoC. Add the compatible string lists to the bindings documentation. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230319212936.26649-5-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-03-23dt-bindings: vendor-prefixes: add Source Parts and Lctech namesIcenowy Zheng1-0/+4
Source Parts Inc. [1] is a company that makes a series of SBCs, SoMs, etc under a brand called Popcorn Computer [2]. Shenzen LC Technology [3] makes various boards and related products around IoT and AI technology. They used the "Cherry Pi" brand name before. Add both companies' names to the vendor prefixes list. [1] https://source.parts/ [2] https://popcorncomputer.com/ [3] http://www.chinalctech.com Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230319212936.26649-4-andre.przywara@arm.com Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
2023-03-14dt-bindings: soc: imx8mp-media-blk-ctrl: Add LDB subnode into schema and exampleMarek Vasut1-0/+51
Document the LDB bridge subnode and add the subnode into the example. For the subnode to work, the block control must scan its subnodes and bind drivers to them, do not misuse either simple-bus or simple-mfd here. Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Liu Ying <victor.liu@nxp.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-14dt-bindings: soc: imx8mp-media-blk-ctrl: Align block controller example nameMarek Vasut1-1/+1
Align the block controller example node name with Linux imx8mp.dtsi . No functional change. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Liu Ying <victor.liu@nxp.com> Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-13dt-bindings: arm: fsl: Fix copy-paste error in commentMichal Vokáč1-1/+1
The imx6dl-yapp4-draco board is actually based on the i.MX6Solo SoC. Fix the comment to match reality. Fixes: 24ef3b6e22fe ("dt-bindings: arm: Add Y Soft IOTA Draco, Hydra and Ursa boards") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-03-10dt-bindings: soc: renesas: Remove R-Car H3 ES1.*Wolfram Sang1-4/+4
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230307105645.5285-4-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Powered by cgit, Gruvboxed by Blaster4385.