aboutsummaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings
AgeCommit message (Collapse)AuthorFilesLines
2024-07-09dt-bindings: soc: fsl: cpm_qe: convert to yaml formatFrank Li7-178/+393
Convert binding doc qe.txt to yaml format. Split it to fsl,qe-firmware.yaml, fsl,qe-ic.yaml, fsl,qe-muram.yaml, fsl,qe-si.yaml fsl,qe-siram.yaml, fsl,qe.yaml. Additional Changes: - Fix error in example. - Change to low case for hex value. - Remove fsl,qe-num-riscs and fsl,qe-snums from required list. - Add #address-cell and #size-cell. - Add interrupts description for qe-ic. - Add compatible string fsl,ls1043-qe-si for fsl,qe-si.yaml - Add compatible string fsl,ls1043-qe-siram for fsl,qe-siram.yaml - Add child node for fsl,qe.yaml Fix below warning: arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000: failed to match any schema with compatible: ['fsl,qe-muram', 'fsl,cpm-muram'] arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000: failed to match any schema with compatible: ['fsl,qe-muram', 'fsl,cpm-muram'] arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000/data-only@0: failed to match any schema with compatible: ['fsl,qe-muram-data', 'fsl,cpm-muram-data'] arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: /soc/uqe@2400000: failed to match any schema with compatible: ['fsl,qe', 'simple-bus'] arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: /soc/uqe@2400000/muram@10000/data-only@0: failed to match any schema with compatible: ['fsl,qe-muram-data', 'fsl,cpm-muram-data'] arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: /soc/uqe@2400000/qeic@80: failed to match any schema with compatible: ['fsl,qe-ic'] Signed-off-by: Frank Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: i2c: i2c-fsi: Convert to json-schemaEddie James2-40/+76
Convert to json-schema for the FSI-attached I2C controller. Signed-off-by: Eddie James <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Ninad Palsule <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: fsi: Document the FSI Hub ControllerEddie James1-0/+45
Document the FSI Hub Controller CFAM engine. Signed-off-by: Eddie James <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: fsi: Document the AST2700 FSI controllerEddie James1-3/+44
Add the appropriate compatible string, and document the new reg properties of the AST2700 FSI controller, which can directly access the FSI controller registers as well as the FSI link address space. Signed-off-by: Eddie James <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: fsi: ast2600-fsi-master: Convert to json-schemaEddie James2-36/+80
Convert to json-schema for the AST2600 FSI master documentation. Signed-off-by: Eddie James <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controllerEddie James1-1/+4
Remove the common properties from the I2CR documentation and instead point to the common FSI controller documentation. Signed-off-by: Eddie James <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: fsi: Document the FSI controller common propertiesEddie James1-0/+66
Since there are multiple FSI controllers documented, the common properties should be documented separately and then referenced from the specific controller documentation. Add bus-frequency for the FSI bus and CFAM local bus frequencies. Add interrupt controller properties. Signed-off-by: Eddie James <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: fsi: Document the IBM SBEFIFO engineEddie James1-0/+46
The SBEFIFO engine provides an interface to the POWER processor Self Boot Engine (SBE). Signed-off-by: Eddie James <[email protected]> Acked-by: Conor Dooley <[email protected]> Reviewed-by: Andrew Jeffery <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: fsi: p9-occ: Convert to json-schemaEddie James2-16/+40
Conver to json-schema for the OCC documentation. Also document the fact that the OCC "bridge" device will often have the hwmon node as a child. Signed-off-by: Eddie James <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: fsi: Document the IBM SCOM engineEddie James1-0/+37
The SCOM engine provides an interface to the POWER processor PIB (Pervasive Interconnect Bus). Signed-off-by: Eddie James <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: fsi: fsi2spi: Document SPI controller child nodesEddie James1-4/+32
The FSI2SPI bridge has several SPI controllers behind it, which should be documented. Also, therefore the node needs to specify address and size cells. Signed-off-by: Eddie James <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yamlFrank Li2-30/+79
Convert device tree binding fsl,ls-scfg-msi to yaml format. Additional changes: - Include gic.h and use predefined macro in example. - Remove label in example. - Change node name to interrupt-controller in example. - Fix error in example. - ls1046a allow 4 irqs, other platform only 1 irq. - Add $ref: msi-controller.yaml - Add #msi-cells. Signed-off-by: Frank Li <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: soc: fsl: Convert q(b)man-* to yaml formatFrank Li9-514/+407
Convert qman, bman, qman-portals, bman-portals to yaml format. Additional Change for fsl,q(b)man-portal: - Only keep one example. - Add fsl,qman-channel-id property. - Use interrupt type macro. - Remove top level qman-portals@ff4200000 at example. Additional change for fsl,q(b)man: - Fixed example error. - Remove redundent part, only keep fsl,qman node. - Change memory-regions to memory-region. - fsl,q(b)man-portals is not required property Additional change for fsl,qman-fqd.yaml: - Fixed example error. - Only keep one example. - Ref to reserve-memory.yaml - Merge fsl,bman reserver memory part Signed-off-by: Frank Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: misc: fsl,qoriq-mc: convert to yaml formatFrank Li2-196/+187
Convert fsl,qoriq-mc from txt to yaml format. Addition changes: - Child node name allow 'ethernet'. - Use 32bit address in example. - Fixed missed ';' in example. - Allow dma-coherent. - Remove smmu, its part in example. - Change child node name as 'ethernet' Signed-off-by: Frank Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: drop stale Anson Huang from maintainersKrzysztof Kozlowski24-24/+52
Emails to Anson Huang bounce: Diagnostic-Code: smtp; 550 5.4.1 Recipient address rejected: Access denied. Add IMX platform maintainers for bindings which would become orphaned. Acked-by: Uwe Kleine-König <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Acked-by: Peng Fan <[email protected]> Acked-by: Wolfram Sang <[email protected]> # for I2C Signed-off-by: Krzysztof Kozlowski <[email protected]> Acked-by: Mark Brown <[email protected]> Acked-by: Jonathan Cameron <[email protected]> # for IIO Acked-by: Andi Shyti <[email protected]> Acked-by: Abel Vesa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: clock: drop obsolete stericsson,abx500.txtStanislav Jakubek1-20/+0
These bindings are already (better) described in mfd/stericsson,ab8500.yaml, drop these now obsolete bindings. Signed-off-by: Stanislav Jakubek <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/Zm7I2Zbq1JNPoEJp@standask-GA-A55M-S2HP Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-09dt-bindings: display: panel: Add compatible for melfas lmfbx101117480Cong Yang1-0/+1
The Melfas lmfbx101117480 is a 10.1" WXGA TFT LCD panel with jadard-jd9365da controller. Hence, we add a new compatible with panel specific config. Signed-off-by: Cong Yang <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/20240704045017.2781991-2-yangcong5@huaqin.corp-partner.google.com Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20240704045017.2781991-2-yangcong5@huaqin.corp-partner.google.com
2024-07-09dt-bindings: display: himax-hx8394: Add Microchip AC40T08A MIPI Display panelManikandan Muralidharan1-4/+13
Add compatible string for the Microchip's AC40T08A MIPI Display panel.This panel uses a Himax HX8394 display controller. The reset line is not populated and leads to driver probe issues, thus add conditional block to narrow reset-gpio property per variant. Signed-off-by: Manikandan Muralidharan <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-07-09Merge tag 'icc-6.11-rc1' of ↵Greg Kroah-Hartman3-0/+205
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next Georgi writes: interconnect changes for 6.11 This pull request contains the interconnect changes for the 6.11-rc1 merge window. It contains just driver changes with the following highlights: Driver changes: - New driver for MediaTek MT8183/8195 platforms - New driver for MSM8953 platforms - New QoS support for RPMh-based platforms with SC7280 being the first one to benefit from it. - Fix incorrect master-id value in qcm2290 driver - Add missing MODULE_DESCRIPTION in a few drivers Signed-off-by: Georgi Djakov <[email protected]> * tag 'icc-6.11-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc: interconnect: qcom: Fix DT backwards compatibility for QoS interconnect: qcom: Add MSM8953 driver dt-bindings: interconnect: qcom: Add Qualcomm MSM8953 NoC interconnect: qcom: qcm2290: Fix mas_snoc_bimc RPM master ID interconnect: qcom: sc7280: enable QoS configuration interconnect: qcom: icc-rpmh: Add QoS configuration support dt-bindings: interconnect: add clock property to enable QOS on SC7280 interconnect: mediatek: remove unneeded semicolon interconnect: qcom: add missing MODULE_DESCRIPTION() macros interconnect: imx: add missing MODULE_DESCRIPTION() macros interconnect: mediatek: Add MediaTek MT8183/8195 EMI Interconnect driver dt-bindings: interconnect: Add MediaTek EMI Interconnect bindings
2024-07-09dt-bindings: gpio: convert Atmel GPIO to json-schemaManikandan Muralidharan2-31/+81
Convert the Atmel GPIO controller binding document to DT schema format using json-schema. The at91 pinctrl driver uses "atmel,at91rm9200-gpio" compatible string to find the number of active GPIO banks and identify the pinmux nodes. "atmel,at91sam9x5-gpio" and "microchip,sam9x60-gpio" have additional registers to handle drive-strength, slew-rate, pull-down to drive the pinmux configs. The new compatible string "microchip,sam9x7-gpio" is added. Signed-off-by: Manikandan Muralidharan <[email protected]> Acked-by: Linus Walleij <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Bartosz Golaszewski <[email protected]>
2024-07-09dt-bindings: power: add Amlogic A5 power domainsXianwei Zhao1-0/+1
Add devicetree binding document and related header file for Amlogic A5 secure power domains. Signed-off-by: Hongyu Chen <[email protected]> Signed-off-by: Xianwei Zhao <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2024-07-09Merge tag 'memory-controller-drv-6.11' of ↵Arnd Bergmann1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers Memory controller drivers for v6.11 Make the Freescale IFC driver selectable because it is used now by two drivers: Freescale NAND and generic NOR flash. The patches adjusting defconfig are waiting on the mailing lists to be picked up. * tag 'memory-controller-drv-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: dt-bindings: memory: fsl: replace maintainer memory: fsl_ifc: Make FSL_IFC config visible and selectable Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-09Merge tag 'sunxi-drivers-for-6.11' of ↵Arnd Bergmann1-0/+28
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers Allwinner SoC driver changes for 6.11 - DT binding addition of regulator node under SRAM node - Cleanup of unused list in SRAM driver * tag 'sunxi-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: dt-bindings: sram: sunxi-sram: Add regulators child soc: sunxi: sram: Remove unused list 'claimed_sram' Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-09Merge tag 'reset-for-v6.11-2' of git://git.pengutronix.de/pza/linux into ↵Arnd Bergmann1-0/+10
soc/drivers Reset controller updates for v6.11, part 2 This tag adds USB VBUS regulator control for Renesas RZ/G2L SoCs, which also touches PHY driver and device tree, and pulls in a new regulator_hardware_enable() helper. The Tegra BPMP reset driver can be compiled under COMPILE_TEST now. * tag 'reset-for-v6.11-2' of git://git.pengutronix.de/pza/linux: arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS phy: renesas: phy-rcar-gen3-usb2: Control VBUS for RZ/G2L SoCs reset: renesas: Add USB VBUS regulator device as child dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document USB VBUS regulator reset: tegra-bpmp: allow building under COMPILE_TEST regulator: core: Add helper for allow HW access to enable/disable regulator Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-09Merge tag 'qcom-drivers-for-6.11' of ↵Arnd Bergmann6-12/+95
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers Qualcomm driver updates for v6.11 Support for Shared Memory (shm) Bridge is added, which provides a stricter interface for handling of buffers passed to TrustZone. The X1Elite platform is added to uefisecapp allow list, to instantiate the efivars implementation. A new in-kernel implementation of the pd-mapper (or servreg) service is introduced, to replace the userspace dependency for USB Type-C and battery management. Support for sharing interrupts across multiple bwmon instances is added, and a refcount imbalance issue is corrected. The LLCC support for recent platforms is corrected, and SA8775P support is added. A new interface is added to SMEM, to expose "feature codes". One example of the usecase for this is to indicate to the GPU driver which frequencies are available on the given device. The interrupt consumer and provider side of SMP2P is updated to provide more useful names in interrupt stats. Support for using the mailbox binding and driver for outgoing IPC interrupt in the SMSM driver is introduced. socinfo driver learns about SDM670 and IPQ5321, as well as get some updates to the X1E PMICs. pmic_glink is bumped to now support managing 3 USB Type-C ports. * tag 'qcom-drivers-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (48 commits) soc: qcom: smp2p: Use devname for interrupt descriptions soc: qcom: smsm: Add missing mailbox dependency to Kconfig soc: qcom: add missing pd-mapper dependencies soc: qcom: icc-bwmon: Allow for interrupts to be shared across instances dt-bindings: interconnect: qcom,msm8998-bwmon: Add X1E80100 BWMON instances dt-bindings: interconnect: qcom,msm8998-bwmon: Remove opp-table from the required list firmware: qcom: tzmem: export devm_qcom_tzmem_pool_new() soc: qcom: add pd-mapper implementation soc: qcom: pdr: extract PDR message marshalling data soc: qcom: pdr: fix parsing of domains lists soc: qcom: pdr: protect locator_addr with the main mutex firmware: qcom: scm: clarify the comment in qcom_scm_pas_init_image() firmware: qcom: scm: add support for SHM bridge memory carveout firmware: qcom: tzmem: enable SHM Bridge support firmware: qcom: scm: add support for SHM bridge operations firmware: qcom: qseecom: convert to using the TZ allocator firmware: qcom: scm: make qcom_scm_qseecom_app_get_id() use the TZ allocator firmware: qcom: scm: make qcom_scm_lmh_dcvsh() use the TZ allocator firmware: qcom: scm: make qcom_scm_ice_set_key() use the TZ allocator firmware: qcom: scm: make qcom_scm_assign_mem() use the TZ allocator ... Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-09Merge tag 'ti-driver-soc-for-v6.11' of ↵Arnd Bergmann5-6/+6
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers TI SoC driver updates for v6.11 - Update TISCI protocol URL link which was dead - socinfo: Add j721E SR 2.0 detection support - MAINTAINER list additions: ti,pruss.yaml and ti,j721e-system-controller.yaml - pm33xx: log statement improvement - knav_qmss: minor data structure optimization * tag 'ti-driver-soc-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: dt-bindings: soc: ti: Move ti,j721e-system-controller.yaml to soc/ti MAINTAINERS: Add entry for ti,pruss.yaml to TI KEYSTONE MULTICORE NAVIGATOR DRIVERS soc: ti: k3-socinfo: Add J721E SR2.0 soc: ti: knav_qmss: Constify struct knav_range_ops firmware: ti_sci: fix TISCI protocol URL link dt-bindings: ti: fix TISCI protocol URL link soc: ti: pm33xx: Fix missing newlines in log statements Link: https://lore.kernel.org/r/20240705151449.s4rngkehjn73favn@stream Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-09Merge tag 'riscv-cache-for-v6.11' of ↵Arnd Bergmann1-0/+66
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers RISC-V cache drivers for v6.11 StarFive: A new driver for the cache controller on the jh8100, which didn't implement Zicbom and thus needs an implementation of non-standard cache management operations. Signed-off-by: Conor Dooley <[email protected]> * tag 'riscv-cache-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: MAINTAINERS: add microchip soc binding directory to microchip soc driver entry MAINTAINERS: add cache binding directory to cache driver entry cache: Add StarFive StarLink cache management dt-bindings: cache: Add docs for StarFive Starlink cache controller Link: https://lore.kernel.org/r/20240707-whoever-undesired-c5f6e96ae403@spud Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-09Merge tag 'v6.11-rockchip-dts64-2' of ↵Arnd Bergmann1-0/+13
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt These are two additional boards, the Xunlong Orange Pi 3B and the Add Radxa ROCK 3B. * tag 'v6.11-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add Xunlong Orange Pi 3B dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B arm64: dts: rockchip: Add Radxa ROCK 3B dt-bindings: arm: rockchip: Add Radxa ROCK 3B Link: https://lore.kernel.org/r/2191200.GUh0CODmnK@diego Signed-off-by: Arnd Bergmann <[email protected]>
2024-07-08dt-bindings: arm: cpus: Add new Cortex and Neoverse namesAndre Przywara1-0/+6
Add compatible strings for the Arm Cortex-A725 and Cortex-A925 CPUs, as well as new Neoverse cores: Arm Neoverse N3, Neoverse V2, Neoverse V3, and Neoverse V3AE. Signed-off-by: Andre Przywara <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-08dt-bindings: interrupt-controller: qcom,pdc: Add sc8180x PDCBjorn Andersson1-0/+1
The SC8180X platform has a PDC block, add a compatible for this. Signed-off-by: Bjorn Andersson <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/20240525-sc8180x-pdc-binding-compatible-v1-1-17031c85ed69@quicinc.com Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-08dt-bindings: dma: qcom,gpi: document the SDX75 GPI DMA EngineRohit Agarwal1-0/+1
Document the GPI DMA Engine on the SDX75 Platform. Signed-off-by: Rohit Agarwal <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-08dt-bindings: watchdog: img,pdc-wdt: Convert to dtschemaShresth Prasad2-19/+55
Convert txt bindings of ImgTec's PDC watchdog timer to dtschema to allow for validation. Signed-off-by: Shresth Prasad <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-08dt-bindings: timer: renesas,tmu: Make interrupt-names requiredGeert Uytterhoeven1-0/+1
Now all in-tree users have been updated with interrupt-names properties according to commit 0076a37a426b6c85 ("dt-bindings: timer: renesas,tmu: Document input capture interrupt"), make interrupt-names required. Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/65fdd0425be0cc1bae9e6f7996aceaa5ad34e510.1716985947.git.geert+renesas@glider.be Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-08dt-bindings: interrupt-controller: fsl,irqsteer: Add imx8mp/imx8qxp supportAlexander Stein1-1/+22
Some SoC like i.MX8MP or i.MX8QXP use a power-domain for this IP. Add SoC-specific compatibles, which also requires a power-domain. Signed-off-by: Alexander Stein <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring (Arm) <[email protected]>
2024-07-08dt-bindings: input: touchscreen: himax,hx83112b: add HX83100AFelix Kaechele1-0/+1
Add a compatible string for the Himax HX83100A touch controller. The HX83100A presents touch events on the internal bus rather than offering a dedicated event register like the other chips in this family do. Signed-off-by: Felix Kaechele <[email protected]> Acked-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2024-07-08dt-bindings: input/touchscreen: imagis: Document ist3038Raymond Hackley1-0/+1
Imagis IST3038 is a variant of Imagis touchscreen IC. Document it in imagis,ist3038c bindings. Signed-off-by: Raymond Hackley <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2024-07-09dt-bindings: i2c: nxp,lpc1788-i2c: convert to dt schemaKanak Shilledar2-33/+54
Convert the NXP I2C controller for LPC2xxx/178x/18xx/43xx to newer DT schema. Created DT schema based on the .txt file which had `compatible`, `reg`, `interrupts`, `clocks`, `#address-cells` and `#size-cells` as required properties. Additional changes to the original .txt binding - added maintainer from the MAINTAINERS file. - added resets property required by the corresponding DTS files. Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Kanak Shilledar <[email protected]> Signed-off-by: Andi Shyti <[email protected]>
2024-07-09dt-bindings: i2c: adjust indentation in DTS example to coding styleKrzysztof Kozlowski8-155/+155
Bindings coding style expects 2- or 4-space indentation in the DTS example. Correct files having something odd (6- or 8-space) to 4-space while re-ordering few properties according to DTS coding style (the first property should be compatible, then reg/ranges). No functional impact. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Andi Shyti <[email protected]>
2024-07-09dt-bindings: i2c: ti,omap4: reference i2c-controller.yaml schemaKrzysztof Kozlowski1-35/+23
Reference the core I2C controller schema to properly define common properties. This allows to drop several (now redundant) properties. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Andi Shyti <[email protected]>
2024-07-09dt-bindings: i2c: samsung,s3c2410: drop unneeded address/size-cellsKrzysztof Kozlowski1-6/+0
The reference i2c-controller.yaml already defines 'address-cells' and 'size-cells', so drop them from list of properties. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Andi Shyti <[email protected]>
2024-07-09dt-bindings: i2c: nvidia,tegra20: drop unneeded address/size-cellsKrzysztof Kozlowski1-6/+0
The reference i2c-controller.yaml already defines 'address-cells' and 'size-cells', so drop them from list of properties. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Andi Shyti <[email protected]>
2024-07-09dt-bindings: i2c: atmel,at91sam: drop unneeded address/size-cellsKrzysztof Kozlowski1-8/+0
The reference i2c-controller.yaml already defines 'address-cells' and 'size-cells', so drop them from list of properties. Drop them as well from required properties, even though i2c-controller.yaml does not require them, because I2C controller could be enabled without any children in DTS for user-space usage. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Signed-off-by: Andi Shyti <[email protected]>
2024-07-09dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3BJonas Karlman1-0/+8
Add devicetree binding for the Xunlong Orange Pi 3B board. Signed-off-by: Jonas Karlman <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2024-07-09dt-bindings: arm: rockchip: Add Radxa ROCK 3BJonas Karlman1-0/+5
Add devicetree binding documentation for the Radxa ROCK 3B board. The Radxa ROCK 3B is a single-board computer based on the Pico-ITX form factor (100mm x 75mm). Two versions of the ROCK 3B exists, a community version based on the RK3568 SoC and an industrial version based on the RK3568J SoC. Signed-off-by: Jonas Karlman <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Heiko Stuebner <[email protected]>
2024-07-08dt-bindings: clock: airoha: Add reset support to EN7581 clock bindingLorenzo Bianconi1-1/+24
Introduce reset capability to EN7581 device-tree clock binding documentation. Add reset register mapping between misc scu and pb scu ones in order to follow the memory order. This change is not introducing any backward compatibility issue since the EN7581 dts is not upstream yet. Fixes: 0a382be005cf ("dt-bindings: clock: airoha: add EN7581 binding") Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Link: https://lore.kernel.org/r/28fef3e83062d5d71e7b4be4b47583f851a15bf8.1719485847.git.lorenzo@kernel.org Signed-off-by: Stephen Boyd <[email protected]>
2024-07-08dt-bindings: clock: mediatek: Document reset cells for MT8188 sysAngeloGioacchino Del Regno1-0/+3
The MT8188 sys clocks embed a reset controller: add #reset-cells to the binding to allow using resets. Fixes: 1086a5310f9c ("dt-bindings: clock: mediatek: Add new MT8188 clock") Signed-off-by: AngeloGioacchino Del Regno <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Conor Dooley <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2024-07-08dt-bindings: clock: mediatek: add syscon compatible for mt7622 pciesysChristian Marangi1-4/+6
Add required syscon compatible for mt7622 pciesys. This is required for SATA interface as the regs are shared. Signed-off-by: Christian Marangi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2024-07-08dt-bindings: clock: sprd,sc9860-clk: convert to YAMLStanislav Jakubek2-63/+159
Convert the Spreadtrum SC9860 clock bindings to DT schema. Signed-off-by: Stanislav Jakubek <[email protected]> Link: https://lore.kernel.org/r/ZobghvwZAyMjl4eB@standask-GA-A55M-S2HP Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2024-07-08dt-bindings: clock: qoriq-clock: convert to yaml formatFrank Li3-212/+291
Convert qoria-clock DT binding to yaml format. Split to two files qoriq-clock.yaml and qoriq-clock-legancy.yaml. Addtional change: - Remove clock consumer part in example - Fixed example dts error - Deprecated legancy node - fsl,b4420-clockgen and fsl,b4860-clockgen fallback to fsl,b4-clockgen. Signed-off-by: Frank Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Rob Herring (Arm) <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2024-07-08dt-bindings: input: ti,nspire-keypad: convert to YAML formatAndrew Davis2-60/+74
Convert TI-NSPIRE Keypad controller bindings to DT schema. Signed-off-by: Andrew Davis <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.