| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The updates to the mediatek, allwinner, ti, tegra, microchip, stm32,
samsung, imx, zynq and amlogic platoforms are fairly small maintenance
changes, either addressing minor mistakes or enabling additional
hardware.
The qualcomm platform changes add a number of features and are larger
than the other ones combined, introducing the use of linux/cleanup.h
across several drivers, adding support for Snapdragon X1E and other
SoCs in platform drivers, a new "protection domain mapper" driver, and
a "shared memory bridge" driver.
The cznic "turris omnia" router based on Marvell Armada gets a
platform driver that talks to the board specific microcontroller.
The reset and cache subsystems get a few minor updates to SoC specific
drivers, while the ff-a, scmi and optee firmware drivers get some code
refactoring and new features"
* tag 'soc-drivers-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (122 commits)
firmware: turris-mox-rwtm: Initialize completion before mailbox
firmware: turris-mox-rwtm: Fix checking return value of wait_for_completion_timeout()
firmware: turris-mox-rwtm: Do not complete if there are no waiters
MAINTAINERS: drop riscv list from cache controllers
platform: cznic: turris-omnia-mcu: fix Kconfig dependencies
bus: sunxi-rsb: Constify struct regmap_bus
soc: sunxi: sram: Constify struct regmap_config
platform: cznic: turris-omnia-mcu: Depend on WATCHDOG
platform: cznic: turris-omnia-mcu: Depend on OF
soc: samsung: exynos-pmu: add support for PMU_ALIVE non atomic registers
arm64: stm32: enable scmi regulator for stm32
firmware: qcom: tzmem: blacklist more platforms for SHM Bridge
soc: qcom: wcnss: simplify with cleanup.h
soc: qcom: pdr: simplify with cleanup.h
soc: qcom: ocmem: simplify with cleanup.h
soc: qcom: mdt_loader: simplify with cleanup.h
soc: qcom: llcc: simplify with cleanup.h
firmware: qcom: tzmem: simplify returning pointer without cleanup
soc: qcom: socinfo: Add PM6350 PMIC
arm64: dts: renesas: rz-smarc: Replace fixed regulator for USB VBUS
...
|
|
clk-next
- Add support for the AP sub-system clock controller in the T-Head TH1520
* clk-qcom: (71 commits)
clk: qcom: Park shared RCGs upon registration
clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
clk: qcom: common: Add interconnect clocks support
interconnect: icc-clk: Add devm_icc_clk_register
interconnect: icc-clk: Specify master/slave ids
dt-bindings: clock: qcom: Add AHB clock for SM8150
clk: qcom: gcc-x1e80100: Set parent rate for USB3 sec and tert PHY pipe clks
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
clk: qcom: kpss-xcc: Return of_clk_add_hw_provider to transfer the error
clk: qcom: lpasscc-sc8280xp: Constify struct regmap_config
clk: qcom: gcc-x1e80100: Fix halt_check for all pipe clocks
clk: qcom: gcc-ipq6018: update sdcc max clock frequency
clk: qcom: camcc-sm8650: Add SM8650 camera clock controller driver
dt-bindings: clock: qcom: Add SM8650 camera clock controller
dt-bindings: clock: qcom: Update the order of SC8280XP camcc header
clk: qcom: videocc-sm8550: Add SM8650 video clock controller
clk: qcom: videocc-sm8550: Add support for videocc XO clk ares
dt-bindings: clock: qcom: Add SM8650 video clock controller
dt-bindings: clock: qcom: Update SM8450 videocc header file name
clk: qcom: gpucc-sa8775p: Update wait_val fields for GPU GDSC's
...
* clk-rockchip:
dt-bindings: clock: rk3188-cru-common: remove CLK_NR_CLKS
clk: rockchip: rk3188: Drop CLK_NR_CLKS usage
clk: rockchip: Switch to use kmemdup_array()
clk: rockchip: rk3128: Add HCLK_SFC
dt-bindings: clock: rk3128: Add HCLK_SFC
dt-bindings: clock: rk3128: Drop CLK_NR_CLKS
clk: rockchip: rk3128: Drop CLK_NR_CLKS usage
clk: rockchip: rk3128: Add hclk_vio_h2p to critical clocks
clk: rockchip: rk3128: Export PCLK_MIPIPHY
dt-bindings: clock: rk3128: Add PCLK_MIPIPHY
* clk-sophgo:
clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate()
clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id()
clk: sophgo: Add SG2042 clock driver
dt-bindings: clock: sophgo: add clkgen for SG2042
dt-bindings: clock: sophgo: add RP gate clocks for SG2042
dt-bindings: clock: sophgo: add pll clocks for SG2042
* clk-thead:
clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
|
|
'clk-samsung' into clk-next
* clk-renesas:
clk: renesas: r9a08g045: Add clock, reset and power domain support for I2C
clk: renesas: r8a779h0: Add Audio clocks
clk: renesas: r9a08g045: Add clock, reset and power domain support for the VBATTB IP
dt-bindings: clock: rcar-gen2: Remove obsolete header files
dt-bindings: clock: r8a7779: Remove duplicate newline
clk: renesas: Drop "Renesas" from individual driver descriptions
clk: renesas: r8a779h0: Fix PLL2/PLL4 multipliers in comments
clk: renesas: r8a779h0: Add VIN clocks
dt-bindings: clock: renesas,rzg2l-cpg: Update description for #reset-cells
clk: renesas: rcar-gen2: Use DEFINE_SPINLOCK() for static spinlock
clk: renesas: cpg-lib: Use DEFINE_SPINLOCK() for global spinlock
clk: renesas: r8a77970: Use common cpg_lock
clk: renesas: r8a779h0: Add CSI-2 clocks
clk: renesas: r8a779h0: Add ISPCS clocks
* clk-amlogic:
clk: meson: add missing MODULE_DESCRIPTION() macros
dt-bindings: clock: meson: a1: peripherals: support sys_pll input
dt-bindings: clock: meson: a1: pll: introduce new syspll bindings
clk: meson: add 'NOINIT_ENABLED' flag to eliminate init for enabled PLL
clk: meson: c3: add c3 clock peripherals controller driver
clk: meson: c3: add support for the C3 SoC PLL clock
dt-bindings: clock: add Amlogic C3 peripherals clock controller
dt-bindings: clock: add Amlogic C3 SCMI clock controller support
dt-bindings: clock: add Amlogic C3 PLL clock controller
dt-bindings: clock: meson: Convert axg-audio-clkc to YAML format
clk: meson: s4: fix pwm_j_div parent clock
clk: meson: s4: fix fixed_pll_dco clock
* clk-allwinner:
clk: sunxi-ng r40: Constify struct regmap_config
clk: sunxi-ng: h616: Add clock/reset for GPADC
dt-bindings: clock: sun50i-h616-ccu: Add GPADC clocks
clk: sunxi: Remove unused struct 'gates_data'
clk: sunxi-ng: add missing MODULE_DESCRIPTION() macros
* clk-samsung:
clk: samsung: gs101: mark gout_hsi2_ufs_embd_i_clk_unipro as critical
clk: samsung: Switch to use kmemdup_array()
clk: samsung: exynos-clkout: Remove misleading of_match_table/MODULE_DEVICE_TABLE
|
|
clk-next
- Add reset support to Airoha EN7581 clk driver
- Add module description to mediatek clk drivers
* clk-stm:
clk: stm32mp25: add security clocks
clk: stm32mp2: use of STM32 access controller
* clk-cleanup:
clk: mxs: Use clamp() in clk_ref_round_rate() and clk_ref_set_rate()
clk: lpc32xx: Constify struct regmap_config
clk: xilinx: Constify struct regmap_config
dt-bindings: clock: sprd,sc9860-clk: convert to YAML
dt-bindings: clock: qoriq-clock: convert to yaml format
clk: vexpress-osc: add missing MODULE_DESCRIPTION() macro
clk: sifive: prci: fix module autoloading
dt-bindings: clock: milbeaut: Drop providers and consumers from example
clk: sprd: add missing MODULE_DESCRIPTION() macro
clk: sophgo: add missing MODULE_DESCRIPTION() macro
* clk-kunit:
clk: disable clk gate tests for s390
clk: test: add missing MODULE_DESCRIPTION() macros
* clk-mediatek:
clk: en7523: fix rate divider for slic and spi clocks
clk: en7523: Remove PCIe reset open drain configuration for EN7581
clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC
clk: en7523: Add reset-controller support for EN7581 SoC
dt-bindings: clock: airoha: Add reset support to EN7581 clock binding
dt-bindings: clock: mediatek: Document reset cells for MT8188 sys
clk: mediatek: mt8173-infracfg: Handle unallocated infracfg when module
dt-bindings: clock: mediatek: add syscon compatible for mt7622 pciesys
clk: mediatek: Add a module description where missing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's some quite exciting core work in this release, we've got the
beginnings of support for hardware initiated transfers which is itself
independently useful for optimising fast paths in existing drivers.
We also have a rework of the DMA mapping which allows finer grained
decisions about DMA mapping messages and also helps remove some bodges
that we'd had.
Otherwise it's a fairly quiet release, a few new drivers and features
for existing drivers, together with various cleanups and DT binding
conversions.
One regmap SPI fix made it's way in here too which I should probably
have sent as a regmap fix instead.
Summary:
- Support for pre-optimising messages, reducing the overhead for
messages that are repeatedly used (eg, reading the interrupt status
from a device). This will also be used for hardware initiated
transfers in future.
- A reworking of how DMA mapping is done, introducing a new helper
and allowing the DMA mapping decision to be done per transfer
instead of per message.
- Support for Atmel SAMA7D64, Freescale LX2160A DSPI and WCH CH341A"
* tag 'spi-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (72 commits)
spi: dt-bindings: at91: Add sama7d65 compatible string
spi: add ch341a usb2spi driver
spi: dt-bindings: fsl-dspi: add compatible string 'fsl,lx2160a-dspi'
spi: dt-bindings: fsl-dspi: add dmas and dma-names properties
spi: spi: Remove unnecessary ‘0’ values from status
spi: spi: Remove unnecessary ‘0’ values from rc
spi: xcomm: fix coding style
spi: xcomm: remove i2c_set_clientdata()
spi: xcomm: make use of devm_spi_alloc_host()
spi: xcomm: add gpiochip support
spi: dt-bindings: snps,dw-apb-ssi.yaml: update compatible property
spi: dt-bindings: fsl-dspi: Convert to yaml format
spi: fsl-dspi: use common proptery 'spi-cs-setup(hold)-delay-ns'
spi: axi-spi-engine: remove platform_set_drvdata()
spi: spi-fsl-lpspi: Pass pm_ptr()
spi: spi-imx: Pass pm_ptr()
spi: spi-fsl-lpspi: Switch to SYSTEM_SLEEP_PM_OPS()
spi: spi-imx: Switch to RUNTIME_PM_OPS/SYSTEM_SLEEP_PM_OPS()
spi: add EXPORT_SYMBOL_GPL(devm_spi_optimize_message)
spi: add devm_spi_optimize_message() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This s a very quiet release for the regulator API, we have a few new
devices (most of which are just ID updates) and one new fairly
specialist core feature for use in interrupt context.
- An API allowing lockless enable/disable for regulators acquired in
exclusive mode, for use in interrupt contexts
- A rewrite of the MedaTek DVFSRC regulator driver which apparently
never worked
- Support for Mediaktek MT6312, Qualcomm QCA6390 and WCN7850, Renesas
RZ/G2L USB VBUS regulator and ST Microelectronics STM32MP13"
* tag 'regulator-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
regulator: dt-bindings: pca9450: Make interrupt optional
regulator: pca9450: Make IRQ optional
dt-bindings: regulator: sprd,sc2731-regulator: convert to YAML
regulator: max77857: Constify struct regmap_config
regulator: da9121: Constify struct regmap_config
dt-bindings: regulator: ti,tps65132: document VIN supply
dt-bindings: mfd: twl: Fix example
regulator: Add Renesas RZ/G2L USB VBUS regulator driver
regulator: core: Add helper for allow HW access to enable/disable regulator
regulator: Add bindings for MediaTek DVFSRC Regulators
regulator: Add refactored mtk-dvfsrc-regulator driver
regulator: Remove mtk-dvfsrc-regulator.c
regulator: userspace-consumer: quiet device deferral
regulator: dt-bindings: mt6315: Document MT6319 PMIC
regulator: add missing MODULE_DESCRIPTION() macro
dt-bindings: regulator: twl-regulator: convert to yaml
regulator: dt-bindings: describe the PMU module of the WCN7850 package
regulator: dt-bindings: describe the PMU module of the QCA6390 package
regulator: dt-bindings: rtq2208: Add specified fixed LDO VOUT property
regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC host:
- Convert from using tasklet to the BH workqueue
- dw_mmc-bluefield: Add support for eMMC HW reset
- mmc_spi: Allow spi controllers incapable of lower than 400kHz
- sdhci: Rework code to eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
- sdhci-brcmstb: Add support for the BCM2712 variant
- sdhci-esdhc-imx: Disable card-detect as system wakeup on S32G platforms
- sdhci-msm: Add support for the SDX75 variant
- sdhci-of-dwcmshc: Enable CQE support for some Rockchip variants
- sdhci-of-esdhc: Convert DT-bindings to yaml
- sdhci-sprd: Convert DT-bindings to yaml
MEMSTICK:
- rtsx_pci_ms: Remove the unused Realtek PCI memstick driver"
* tag 'mmc-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (26 commits)
MAINTAINERS: add '[email protected]' as relevant mailing list for 'sdhci-esdhc-imx' driver
mmc: sdhci-esdhc-imx: obtain the 'per' clock rate after its enablement
mmc: sdhci-esdhc-imx: disable card detect wake for S32G based platforms
dt-bindings: mmc: sdhci-sprd: convert to YAML
mmc: davinci_mmc: report all possible bus widths
mmc: dw_mmc-bluefield: Add support for eMMC HW reset
mmc: dw_mmc: Add support for platform specific eMMC HW reset
mmc: sdhci_am654: Constify struct regmap_config
mmc: Convert from tasklet to BH workqueue
mmc: sdhi: Convert from tasklet to BH workqueue
mmc: mmc_spi: allow for spi controllers incapable of getting as low as 400k
memstick: rtsx_pci_ms: Remove Realtek PCI memstick driver
MAINTAINERS: drop entry for VIA SD/MMC controller
mmc: tmio: Remove obsolete .set_pwr() callback()
mfd: tmio: Remove obsolete .set_clk_div() callback
mmc: sdhci-brcmstb: Add ARCH_BCM2835 option
mmc: sdhci: Eliminate SDHCI_QUIRK_UNSTABLE_RO_DETECT
dt-bindings: mmc: Convert fsl-esdhc.txt to yaml
dt-bindings: mmc: mmc-spi-slot: Change voltage-ranges to uint32-matrix
mmc: add missing MODULE_DESCRIPTION() macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add support for HW-managed devices
pmdomain providers:
- amlogic: Add support for the A5 and the A4 power domains
- arm: Enable system wakeups for the SCMI PM domain
- qcom/clk: Add HW-mode callbacks to allow switching of GDSC mode
pmdomain consumers:
- qcom/media/venus: Enable support for switching GDSC HW-mode on V6"
* tag 'pmdomain-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: amlogic: Constify struct meson_secure_pwrc_domain_desc
venus: pm_helpers: Use dev_pm_genpd_set_hwmode to switch GDSC mode on V6
clk: qcom: videocc: Use HW_CTRL_TRIGGER for SM8250, SC7280 vcodec GDSC's
clk: qcom: gdsc: Add set and get hwmode callbacks to switch GDSC mode
PM: domains: Add the domain HW-managed mode to the summary
PM: domains: Allow devices attached to genpd to be managed by HW
pmdomain: amlogic: Add support for A5 power domains controller
dt-bindings: power: add Amlogic A5 power domains
pmdomain: amlogic: add missing MODULE_DESCRIPTION() macros
pmdomain: arm: scmi_pm_domain: set flag GENPD_FLAG_ACTIVE_WAKEUP
pmdomain: renesas: rmobile-sysc: Use for_each_child_of_node_scoped()
pmdomain: core: Use genpd_is_irq_safe() helper
pmdomain: amlogic: Add support for A4 power domains controller
dt-bindings: power: add Amlogic A4 power domains
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"This contains the usual mix of fixes, cleanups, two new drivers and
several dt binding updates. The fixes are for minor issues that are
already old (4.11-rc1 and 3.9-rc1) and were found by code review and
not during usage, so I didn't sent them for earlier inclusion.
The changes to include/linux/mfd/stm32-timers.h and
drivers/counter/stm32-timer-cnt.c are part of an immutable branch that
will also be included in the mfd and counter pulls. It changes some
register definitions and affects the pwm-stm32 driver.
Thanks go to Andy Shevchenko, AngeloGioacchino Del Regno, Conor
Dooley, David Lechner, Dhruva Gole, Drew Fustini, Frank Li, Jeff
Johnson, Junyi Zhao, Kelvin Zhang, Krzysztof Kozlowski, Lee Jones,
Linus Walleij, Linus Walleij, Michael Hennerich, Nicola Di Lieto,
Nicolas Ferre, Nuno Sa, Paul Cercueil, Raag Jadav, Rob Herring, Sean
Anderson, Sean Young, Shenwei Wang, Stefan Wahren, Trevor Gamblin,
Tzung-Bi Shih, Vincent Whitchurch and William Breathitt Gray for their
contributions to this pull request; they authored changes, spend time
reviewing changes and coordinated the above mentioned immutable
branch"
* tag 'pwm/for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (38 commits)
pwm: axi-pwmgen: add .max_register to regmap
dt-bindings: pwm: at91: Add sama7d65 compatible string
pwm: atmel-tcb: Make private data variable naming consistent
pwm: atmel-tcb: Simplify checking the companion output
pwm: Allow pwm state transitions from an invalid state
pwm: xilinx: Simplify using devm_ functions
pwm: Use guards for pwm_lookup_lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for export->lock instead of explicity mutex_lock + mutex_unlock
pwm: Use guards for pwm_lock instead of explicity mutex_lock + mutex_unlock
pwm: Register debugfs operations after the pwm class
pwm: imx-tpm: Enable pinctrl setting for sleep state
pwm: lpss: drop redundant runtime PM handles
pwm: lpss: use devm_pm_runtime_enable() helper
pwm-stm32: Make use of parametrised register definitions
dt-bindings: pwm: imx: remove interrupt property from required
pwm: meson: Add support for Amlogic S4 PWM
pwm: Add GPIO PWM driver
dt-bindings: pwm: Add pwm-gpio
pwm: Drop pwm_apply_state()
bus: ts-nbus: Use pwm_apply_might_sleep()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"Obsolete driver removals:
- Removed obsolete adm1021 and max6642 drivers
New drivers:
- MPS MP2891, MP2993, MP9941, and MP5920
- SPD5118 (Temperature Sensor and EEPROM)
Added device support to existing drivers:
- g762: G761
- dell-smm: Dell OptiPlex 7060
- asus-ec-sensors: ProArt X670E-CREATOR WIFI
- corsair-psu: HX1200i Series 2023 psu
- nzxt-smart2: Additional USB IS for NZXT RGB & Fan Controller
Notable enhancements and fixes:
- Removed use of i2c_match_id()
- Constified struct regmap_config where feasible
- Cleaned up amc6821 driver, and converted to use regmap and
with_info API
- Converted max6639 driver to use with_info API; added support for
additional sysfs attributes
- Fixed various sysfs attribute underflows
- Added PEC support to hwmon core, and use in lm90 and max31827
drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (103 commits)
hwmon: (max6697) Fix swapped temp{1,8} critical alarms
hwmon: (max6697) Fix underflow when writing limit attributes
hwmon: Remove obsolete adm1021 and max6642 drivers
hwmon: (pmbus/ltc4286) Drop unused i2c device ids
hwmon: (g762) Initialize fans after configuring clock
hwmon: (amc6821) Add support for pwm1_mode attribute
hwmon: (amc6821) Convert to with_info API
hwmon: (amc6821) Convert to use regmap
hwmon: (amc6821) Drop unnecessary enum chips
hwmon: (amc6821) Use BIT() and GENMASK()
hwmon: (amc6821) Use tabs for column alignment in defines
hwmon: (amc6821) Reorder include files, drop unnecessary ones
hwmon: (amc6821) Add support for fan1_target and pwm1_enable mode 4
hwmon: (amc6821) Rename fan1_div to fan1_pulses
hwmon: (amc6821) Make reading and writing fan speed limits consistent
hwmon: (amc6821) Stop accepting invalid pwm values
hwmon: (w83627ehf) Fix underflows seen when writing limit attributes
hwmon: (nct6775-core) Fix underflows seen when writing limit attributes
hwmon: (lm95234) Fix underflows seen when writing limit attributes
hwmon: (adc128d818) Fix underflows seen when writing limit attributes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
|
|
Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Updates for timers, timekeeping and related functionality:
Core:
- Make the takeover of a hrtimer based broadcast timer reliable
during CPU hot-unplug. The current implementation suffers from a
race which can lead to broadcast timer starvation in the worst
case.
- VDSO related cleanups and simplifications
- Small cleanups and enhancements all over the place
PTP:
- Replace the architecture specific base clock to clocksource, e.g.
ART to TSC, conversion function with generic functionality to avoid
exposing such internals to drivers and convert all existing drivers
over. This also allows to provide functionality which converts the
other way round in the core code based on the same parameter set.
- Provide a function to convert CLOCK_REALTIME to the base clock to
support the upcoming PPS output driver on Intel platforms.
Drivers:
- A set of Device Tree bindings for new hardware
- Cleanups and enhancements all over the place"
* tag 'timers-core-2024-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
clocksource/drivers/realtek: Add timer driver for rtl-otto platforms
dt-bindings: timer: Add schema for realtek,otto-timer
dt-bindings: timer: Add SOPHGO SG2002 clint
dt-bindings: timer: renesas,tmu: Add R-Car Gen2 support
dt-bindings: timer: renesas,tmu: Add RZ/G1 support
dt-bindings: timer: renesas,tmu: Add R-Mobile APE6 support
clocksource/drivers/mips-gic-timer: Correct sched_clock width
clocksource/drivers/mips-gic-timer: Refine rating computation
clocksource/drivers/sh_cmt: Address race condition for clock events
clocksource/driver/arm_global_timer: Remove unnecessary ‘0’ values from err
clocksource/drivers/arm_arch_timer: Remove unnecessary ‘0’ values from irq
tick/broadcast: Make takeover of broadcast hrtimer reliable
tick/sched: Combine WARN_ON_ONCE and print_once
x86/vdso: Remove unused include
x86/vgtod: Remove unused typedef gtod_long_t
x86/vdso: Fix function reference in comment
vdso: Add comment about reason for vdso struct ordering
vdso/gettimeofday: Clarify comment about open coded function
timekeeping: Add missing kernel-doc function comments
tick: Remove unnused tick_nohz_get_idle_calls()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- qca: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: Add BCM4388 support
- btintel: Add support for BlazarU core
- btintel: Add support for Whale Peak2
- btnxpuart: Add support for AW693 A1 chipset
- btnxpuart: Add support for IW615 chipset
- btusb: Add Realtek RTL8852BE support ID 0x13d3:0x3591
* tag 'for-net-next-2024-07-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (71 commits)
Bluetooth: btmtk: Mark all stub functions as inline
Bluetooth: hci_qca: Fix build error
Bluetooth: hci_qca: use the power sequencer for wcn7850 and wcn6855
Bluetooth: hci_qca: make pwrseq calls the default if available
Bluetooth: hci_qca: unduplicate calls to hci_uart_register_device()
Bluetooth: hci_qca: schedule a devm action for disabling the clock
dt-bindings: bluetooth: qualcomm: describe the inputs from PMU for wcn7850
Bluetooth: btnxpuart: Fix warnings for suspend and resume functions
Bluetooth: btnxpuart: Add system suspend and resume handlers
Bluetooth: btnxpuart: Add support for IW615 chipset
Bluetooth: btnxpuart: Add support for AW693 A1 chipset
Bluetooth: btintel: Add support for Whale Peak2
Bluetooth: btintel: Add support for BlazarU core
Bluetooth: btusb: mediatek: add ISO data transmission functions
Bluetooth: btmtk: move btusb_recv_acl_mtk to btmtk.c
Bluetooth: btmtk: move btusb_mtk_[setup, shutdown] to btmtk.c
Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c
Bluetooth: btusb: add callback function in btusb suspend/resume
Bluetooth: btmtk: rename btmediatek_data
Bluetooth: btusb: mediatek: return error for failed reg access
...
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Drop the inputs from the host and instead expect the Bluetooth node to
consume the outputs of the internal PMU. This model is closer to reality
than how we represent it now.
Signed-off-by: Bartosz Golaszewski <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
This helps validating DTS files. Introduced changes:
1. Dropped serial details from example
2. Added required example include
Signed-off-by: Rafał Miłecki <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
QCA6390 has a compatible listed in the bindings but is missing the
regulators description. Add the missing supply property and list the
required ones in the allOf section.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
It is possible to have thermal zones which don't have any trip points.
These zones in effect simply represent a temperature sensor without any
action associated with it. While the schema has always required a
'trips' node, users have existed for a long time without it. Update the
schema to match reality.
Signed-off-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Preferred indentation for DTS examples in the bindings is 4-space. It
is also preferred not to have redundant/unused labels. No functional
change
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Simplify few bindings which already reference thermal-sensor.yaml schema
by dropping unneeded requiring of '#thermal-sensor-cells' and dropping
assigned-clocks properties (core schema allows it if 'clocks' are
there).
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Baolin Wang <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Biju Das <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Heiko Stuebner <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Niklas Söderlund <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Amit Kucheria <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Dmitry Baryshkov <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Dmitry Baryshkov <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Acked-by: Florian Fainelli <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.
Reviewed-by: Vasily Khoruzhick <[email protected]>
Acked-by: Chen-Yu Tsai <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Device is a thermal sensor and all in-tree DTS provide
'#thermal-sensor-cells', so reference the thermal-sensor.yaml to
simplify it, bring the common definition of '#thermal-sensor-cells'
property and require it.
Reviewed-by: Neil Armstrong <[email protected]>
Reviewed-by: Guillaume LA ROQUE <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
All Samsung Exynos SoCs Thermal Management Units have only one sensor,
so make '#thermal-sensor-cells' fixed at 0.
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Linux kernel uses thermal zone node name during registering thermal
zones and has a hard-coded limit of 20 characters, including terminating
NUL byte. The bindings expect node names to finish with '-thermal'
which is eight bytes long, thus we have only 11 characters for the reset
of the node name (thus 10 for the pattern after leading fixed character).
Reported-by: Rob Herring <[email protected]>
Closes: https://lore.kernel.org/all/CAL_JsqKogbT_4DPd1n94xqeHaU_J8ve5K09WOyVsRX3jxxUW3w@mail.gmail.com/
Fixes: 1202a442a31f ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Cc: [email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Document the Temperature Sensor (TSENS) on the X1E80100 Platform.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
Reviewed-by: Amit Kucheria <[email protected]>
Link: https://lore.kernel.org/r/20240628-x1e80100-bindings-thermal-qcom-tsens-v2-1-4843d4c2ba24@linaro.org
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Convert the hisilicon SoCs tsensor txt bindings to dt-schema
Signed-off-by: Abdulrasaq Lawani <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20240618-hisilicon-thermal-dt-bindings-conversion-v4-1-7eba97fbe6d0@gmail.com
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Convert the Spreadtrum SC9860 timer bindings to DT schema.
Changes during conversion:
- rename file to match compatible
- add sprd,sc9860-suspend-timer which was previously undocumented
- minor grammar fix in description
Signed-off-by: Stanislav Jakubek <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Baolin Wang <[email protected]>
Link: https://lore.kernel.org/r/ZoU95lBgoyF/8Md3@standask-GA-A55M-S2HP
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
There is a group of PHY chips supporting BroadR-Reach link modes in
a manner allowing for more or less identical register usage as standard
Clause 22 PHY.
These chips support standard Ethernet link modes as well, however, the
circuitry is mutually exclusive and cannot be auto-detected.
The link modes in question are 100Base-T1 as defined in IEEE802.3bw,
based on Broadcom's 1BR-100 link mode, and newly defined 10Base-T1BRR
(1BR-10 in Broadcom documents).
Add optional brr-mode flag to switch the PHY to BroadR-Reach mode.
Signed-off-by: Kamil Horák (2N) <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This adds a new optional device tree property called firware-name.
Signed-off-by: Neeraj Sanjay Kale <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Introduce device-tree binding documentation for Airoha EN7581 ethernet
mac controller.
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/7dfecf8aa4e6519562a94455b95c49e1b3c858a0.1720818878.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
This release includes significant updates, with the primary
change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.
New Support:
- Added support for Intel Arrow Lake-H.
- Added I2C support in the Arioha SoC by linking the Mediatek
I2C controller.
Cleanups:
- Added the MODULE_DESCRIPTION() macro, resolving a modpost
warning in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by
removing unnecessary semicolons after brackets.
General improvements:
- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during
suspend() before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for
spurious interrupts.
DTS Changes:
- Removed address-cell and size-cell from the Atmel at91sam,
nVidia Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with
the i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string
thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
f7ce5eb2cb79 ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
20c8ad72eb7f ("eth: bnxt: use the RSS context XArray instead of the local list")
Adjacent changes:
net/ethtool/ioctl.c
503757c80928 ("net: ethtool: Fix RSS setting")
eac9122f0c41 ("net: ethtool: record custom RSS contexts in the XArray")
Signed-off-by: Jakub Kicinski <[email protected]>
|