| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Convert the Spreadtrum SC2731 RTC bindings to DT schema.
Rename file to match compatible.
Signed-off-by: Stanislav Jakubek <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/ZolsyEC8eeJWNIb6@standask-GA-A55M-S2HP
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The bulk of the changes this time are for device tree files in the
rockchips platform, addressing correctness issues on individual
boards, plus one change in the rk356x SoC file to make it match the
binding.
The only other changes that came in are
- a CPU frequencey scaling fix for JH7110 (RISC-V)
- a build fix for the cznic hwrandom driver
- a fix for a deadlock in qualcomm uefi secure application firmware
driver"
* tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency
riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz
firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire()
arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF
arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma
arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma
arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E
arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
|
|
Merge updates related to system sleep, operating performance points
(OPP) updates, and PM tooling updates for 6.12-rc1:
- Remove unused stub for saveable_highmem_page() and remove deprecated
macros from power management documentation (Andy Shevchenko).
- Use ysfs_emit() and sysfs_emit_at() in "show" functions in the PM
sysfs interface (Xueqin Luo).
- Update the maintainers information for the operating-points-v2-ti-cpu DT
binding (Dhruva Gole).
- Drop unnecessary of_match_ptr() from ti-opp-supply (Rob Herring).
- Update directory handling and installation process in the pm-graph
Makefile and add .gitignore to ignore sleepgraph.py artifacts to
pm-graph (Amit Vadhavana, Yo-Jung Lin).
- Make cpupower display residency value in idle-info (Aboorva
Devarajan).
- Add missing powercap_set_enabled() stub function to cpupower (John
B. Wyatt IV).
- Add SWIG support to cpupower (John B. Wyatt IV).
* pm-sleep:
PM: hibernate: Remove unused stub for saveable_highmem_page()
Documentation: PM: Discourage use of deprecated macros
PM: sleep: Use sysfs_emit() and sysfs_emit_at() in "show" functions
PM: hibernate: Use sysfs_emit() and sysfs_emit_at() in "show" functions
* pm-opp:
dt-bindings: opp: operating-points-v2-ti-cpu: Update maintainers
opp: ti: Drop unnecessary of_match_ptr()
* pm-tools:
pm:cpupower: Add error warning when SWIG is not installed
MAINTAINERS: Add Maintainers for SWIG Python bindings
pm:cpupower: Include test_raw_pylibcpupower.py
pm:cpupower: Add SWIG bindings files for libcpupower
pm:cpupower: Add missing powercap_set_enabled() stub function
pm-graph: Update directory handling and installation process in Makefile
pm-graph: Make git ignore sleepgraph.py artifacts
tools/cpupower: display residency value in idle-info
|
|
Update the spdifrx yaml file to reference the dai-common.yaml schema,
enabling the use of the 'sound-name-prefix' property
Signed-off-by: Andrei Simion <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
At least if rsnd is using DPCM connection on Audio-Graph-Card2,
fw_devlink might doesn't have enough information to break the cycle
(Same problem might occur with Multi-CPU/Codec or Codec2Codec).
In such case, rsnd driver will not be probed.
Add post-init-providers support to break the link cycle.
Signed-off-by: Kuninori Morimoto <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/drivers
One new pmu compatible for rk3576
* tag 'v6.12-rockchip-drivers-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: arm: rockchip: Add rk3576 compatible string to pmu.yaml
Link: https://lore.kernel.org/r/3004026.A7TYtsqqnE@diego
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into soc/dt
ASPEED device tree updates for 6.12
- New machines
* IBM P11 AST2600 BMC machines, named Blueridge and Fuji
* Meta's Catalina AST2600 BMC
- Updates to harma, minerva, mtmitchell, mtjade, system1, SPC621D8HM3
- Various changes to the dtsi to keep the YAML checker happy
* tag 'aspeed-6.12-devicetree' of https://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: (52 commits)
ARM: dts: aspeed: catalina: Update io expander line names
ARM: dts: aspeed: catalina: Add pdb cpld io expander
ARM: dts: aspeed: harma: Remove pca9546
ARM: dts: aspeed: harma: Fix spi-gpio dtb_check warnings
ARM: dts: aspeed: harma: Enable mctp controller
ARM: dts: aspeed: harma: Add temperature device
ARM: dts: aspeed: harma: Add fru device
ARM: dts: aspeed: harma: Remove multi-host property
ARM: dts: aspeed: harma: Add power monitor xdp710
ARM: dts: aspeed: harma: Add ina238
ARM: dts: aspeed: harma: Add sgpio name
ARM: dts: aspeed: harma: Add VR devices
ARM: dts: aspeed: harma: Revise hsc chip
ARM: dts: aspeed-g6: Drop cells properties from ethernet nodes
ARM: dts: aspeed-g6: Use generic 'ethernet' for ftgmac100 nodes
ARM: dts: aspeed: Clean up AST2500 pinctrl properties
ARM: dts: aspeed: Remove undocumented XDMA nodes
ARM: dts: aspeed: Specify required properties for sram node
ARM: dts: aspeed: Specify correct generic compatible for CVIC
ARM: dts: aspeed: Fix coprocessor interrupt controller node name
...
Link: https://lore.kernel.org/r/CACPK8XeGDUrbJ-OaxqQBR=aVVYyrKGnvT1ZKXO0vPHpsjQ_i9g@mail.gmail.com
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards the Odroid-M2 and GameForce Ace, CAN on rk3568, RGA2 on rk3588
and some non-critical dts cleanups.
* tag 'v6.12-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
arm64: dts: rockchip: remove duplicate nodes from dts for ROCK 4SE
arm64: dts: rockchip: Add GameForce Ace
dt-bindings: arm: rockchip: Add GameForce Ace
arm64: dts: rockchip: rk3588s fix sdio pins to pull up
arm64: dts: rockchip: Add RGA2 support to rk3588
arm64: dts: rockchip: Add missing tshut props to tsadc on quartz64-b
arm64: dts: rockchip: Add Hardkernel ODROID-M2
dt-bindings: arm: rockchip: Add Hardkernel ODROID-M2
arm64: dts: rockchip: drop hp-pin-name property from audio card on nanopc-t6
Link: https://lore.kernel.org/r/11663608.jrtcCam0TZ@diego
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom SoCs Device Tree changes for 6.12,
please pull the following:
- Krzysztof documents the AVS monitor binding present on 2711 (Raspberry
Pi 4)
- Rafal updates the Broadcom Northstar DTS files to use the recent NVMEM
binding
- Artur factors the nodes between the BCM21664 and BCM23550 SoCs since
they are nearly identical
- Stefan converts the bcm2835-system-timer and bcm2836-l1-intc to a YAML
binding syntax
* tag 'arm-soc/for-6.12/devicetree' of https://github.com/Broadcom/stblinux:
dt-bindings: interrupt-controller: convert bcm2836-l1-intc to yaml
dt-bindings: timer: convert bcm2835-system-timer bindings to YAML
ARM: dts: bcm-mobile: Split out nodes used by both BCM21664 and BCM23550
ARM: dts: broadcom: bcm21664: Move chosen node into Garnet DTS
ARM: dts: broadcom: convert NVMEM content to layout syntax
dt-bindings: soc: bcm: document brcm,bcm2711-avs-monitor
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Thomas needs 5a498d4d06d6 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <[email protected]>
|
|
The "amlogic,tx-delay-ns" property schema has unnecessary type reference
as it's a standard unit suffix, and the constraints are in freeform
text rather than schema.
Signed-off-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As Rob pointed in another mail thread [1], the binding of tja11xx PHY
is completely broken, the schema cannot catch the error in the DTS. A
compatiable string must be needed if we want to add a custom propety.
So extract known PHY IDs from the tja11xx PHY drivers and convert them
into supported compatible string list to fix the broken binding issue.
Fixes: 52b2fe4535ad ("dt-bindings: net: tja11xx: add nxp,refclk_in property")
Link: https://lore.kernel.org/[email protected] # [1]
Signed-off-by: Wei Fang <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Describe the inputs from the PMU that the Bluetooth module on wcn6855
consumes and drop the ones from the host. This breaks the current
contract but the only two users of wcn6855 upstream - sc8280xp based
boards - will be updated in DTS patches sent separately while the
hci_qca driver will remain backwards compatible with older DT sources.
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Bartosz Golaszewski <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
Add binding document for Amlogic Bluetooth chipsets attached over UART.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Yang Li <[email protected]>
Signed-off-by: Luiz Augusto von Dentz <[email protected]>
|
|
To update with the latest fixes.
|
|
Add support for the Watchdog Timer (WDT) hardware found in the Renesas
RZ/V2H(P) SoC to the `renesas,wdt` device tree bindings.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Wim Van Sebroeck <[email protected]>
|
|
Convert the Spreadtrum SC9860 I2C controller bindings to DT schema.
Adjust filename to match compatible.
Signed-off-by: Stanislav Jakubek <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
Theobroma Systems Mule is an MCU that emulates a set of I2C devices,
among which devices that are reachable through an I2C-mux. The devices
on the mux can be selected by writing the appropriate device number to
an I2C config register.
Reviewed-by: Rob Herring (Arm) <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
Signed-off-by: Farouk Bouabid <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Wolfram Sang <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
Just like RK356x and RK3588, RK3576 is compatible to the existing
rk3399 binding.
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Reviewed-by: Andi Shyti <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Shawn Lin <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
'multi-master' property is defined by core i2c-controller schema in
dtschema package, so binding which references it and has
unevaluatedProperties:false, does not need to mention it. It is
completely redundant here.
Suggested-by: Andi Shyti <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
Top level defines clocks as variable from 3 to 6 items, so each clause
in if:then: should narrow it further with explicit min and maxItems.
Without minItems, the constrain from top-level is being applied, thus
qcom,msm8996-cci allows between 3 and 4 clocks.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
Properties are expected to be defined in top-level "properties:" block
and further customized in "if:then:". Only one variant has power
domains, so add respective top-level property and disallow it for other
devices.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
Both xxx and xxx-names properties with variable number of items should
be constrained in each "if:then:". Add missing constraints for clocks,
since we have such for clock-names.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
"if:then:" block for Tegra114 and Tegra120 I2C controllers has the same
"then" part (same clocks), so combine them.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
Document the Renesas RZ/G3S (R9A08G045) RIIC IP. This is compatible with
the version available on Renesas RZ/V2H (R9A09G075).
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Claudiu Beznea <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
Add i.MX8Q PCIe "fsl,imx8q-pcie" compatible strings. clock-names align
DesignWare Cores (DWC) common naming convension.
Link: https://lore.kernel.org/linux-pci/[email protected]
Signed-off-by: Richard Zhu <[email protected]>
Signed-off-by: Frank Li <[email protected]>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Acked-by: Manivannan Sadhasivam <[email protected]>
|
|
Allow fixed-partitions to be specified through a partitions
node.
Fixes the below dtbs_check warning:
arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtb: nand@0,0: Unevaluated properties are not allowed ('partitions' was unexpected)
Signed-off-by: Roger Quadros <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
We need the USB fixes in here as well, and this also resolves the merge
conflict in:
drivers/usb/typec/ucsi/ucsi.c
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
We need the char-misc fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/other driver fixes for 6.11-rc7. It's
nothing huge, just a bunch of small fixes of reported problems,
including:
- lots of tiny iio driver fixes
- nvmem driver fixex
- binder UAF bugfix
- uio driver crash fix
- other small fixes
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
VMCI: Fix use-after-free when removing resource in vmci_resource_remove()
Drivers: hv: vmbus: Fix rescind handling in uio_hv_generic
uio_hv_generic: Fix kernel NULL pointer dereference in hv_uio_rescind
misc: keba: Fix sysfs group creation
dt-bindings: nvmem: Use soc-nvmem node name instead of nvmem
nvmem: Fix return type of devm_nvmem_device_get() in kerneldoc
nvmem: u-boot-env: error if NVMEM device is too small
misc: fastrpc: Fix double free of 'buf' in error path
binder: fix UAF caused by offsets overwrite
iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips
iio: adc: ad7173: fix GPIO device info
iio: adc: ad7124: fix DT configuration parsing
iio: adc: ad_sigma_delta: fix irq_flags on irq request
iio: adc: ads1119: Fix IRQ flags
iio: fix scale application in iio_convert_raw_to_processed_unlocked
iio: adc: ad7124: fix config comparison
iio: adc: ad7124: fix chip ID mismatch
iio: adc: ad7173: Fix incorrect compatible string
iio: buffer-dmaengine: fix releasing dma channel on error
iio: adc: ad7606: remove frstdata check for serial mode
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon next for v6.12
Detailed description for this pull request:
- Add missing child node port on exttcon-ptn5150 binding document
- Convert extcon-usb-gpio.txt to yaml format for binding document
- Add new LC824206XA microUSB switch driver
: Add a new driver for the ON Semiconductor LC824206XA microUSB switch and
accessory detector chip. It has been tested on a Lenovo Yoga Tablet 2 Pro
1380. And this driver is only used on x86/ACPI (non devicetree) devices,
Therefor there is no devicetree bindings documentation.
- Apply immutable branch between power_supply and extcon tree for extcon-lc824206xa.c
* tag 'extcon-next-for-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: lc824206xa: Fix build error of POWER_SUPPLY_PROP_USB_TYPE
dt-bindings: extcon: convert extcon-usb-gpio.txt to yaml format
dt-bindings: extcon: ptn5150: add child node port
extcon: Add LC824206XA microUSB switch driver
power: supply: Change usb_types from an array into a bitmask
power: supply: sysfs: Move power_supply_show_enum_with_available() up
power: supply: sysfs: Add power_supply_show_enum_with_available() helper
power: supply: rt9467-charger: Remove "usb_type" property write support
power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
power: supply: "usb_type" property may be written to
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support features and cleanup for 6.12
Late pull request as I was planing to include another series that
is waiting for a fix to end up in char-misc-next. That can wait
for next cycle.
Includes one immutable branch merge from MFD to get a necessary header
change.
Usual mix of a few new drivers, additional device support for existing
drivers, new features and a bunch of cleanup across tree.
New device support
==================
asahi-kasei,ak8975
- A few minor fixes as precursors to support for the AK09118 magnetometer
that is very similar to the already supported AK09112
awinic,aw96103
- New driver for this capacitive proximity sensor.
x-powers,axp202
- Add support for the axp717 (including merge of MFD immutable branch).
sophgo,saradc
- New driver for this SOC ADC.
Features
========
adi,ad4695
- Add calibration support.
bosch,bmi323
- Ensure device is in lowest power state on suspend.
Cleanup and minor fixes
=======================
treewide
- Start to standardize formatting of id tables (ADC drivers done so far).
adi,ad5449
- Drop platform data support as long unused in upstream kernel.
bosch,bmc150
- Use fwnode_irq_get_by_name() in place of of_ variant.
- Use ACPI_HANDLE() to get the handle directly rather than via
ACPI_COMPANION()
google,cros_ec_mkbp_proximity
- Include mod_devicetable.h instead of broader of.h
mirochip,mcp320x
- Drop vendorless compatible entries as not needed for backwards
compatibility and should not be used in new boards.
st,lsm6dsx
- Use iio_read_acpi_mount_matrix() helper instead of open coding the
same.
- Drop some unnecessary dev_fwnode() calls to check if a fwnode is
available. All the calls made handle this anyway.
xilinx,ams
- Use device_for_each_child_node_scoped() to avoid manual release of
fwnode handle.
tools,generic-buffer
- Handle failure to allocate trigger name.
- Cleanup .*.cmd files if present.
* tag 'iio-for-6.12b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (28 commits)
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
dt-bindings: iio: aw96103: Add bindings for aw96103/aw96105 sensor
iio: adc: sophgo-saradc: Add driver for Sophgo CV1800B SARADC
dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADC
tools/iio: Add memory allocation failure check for trigger_name
iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
iio: imu: st_lsm6dsx: Use iio_read_acpi_mount_matrix() helper
iio: adc: mcp320x: Drop vendorless compatible strings
iio: dac: ad5449: drop support for platform data
iio: adc: xilinx-ams: use device_* to iterate over device child nodes
iio: ABI: document ad4695 new attributes
doc: iio: ad4695: update for calibration support
iio: adc: ad4695: implement calibration support
iio: adc: ad4695: add 2nd regmap for 16-bit registers
iio: bmi323: peripheral in lowest power state on suspend
...
|
|
Add compatible binding for the axp717.
Acked-by: Jonathan Cameron <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Chris Morgan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.12
DPU:
- Fix implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
DP:
- Enable widebus on all relevant chipsets
DSI:
- Fix PHY programming on SM8350 / SM8450
HDMI:
- Add support for HDMI on MSM8998
MDP5:
- NULL string fix
GPU:
- A642L speedbin support
- A615 support
- A306 support
- A621 support
- Expand UBWC uapi
- A7xx GPU devcoredump fixes
- A5xx preemption fixes
- cleanups
Signed-off-by: Dave Airlie <[email protected]>
From: Rob Clark <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGudK7YMiKDhtvYgp=bY64OZZt0UQSkEkSxLo4rLmeVd9g@mail.gmail.com
|
|
Merge series from Andre Przywara <[email protected]>:
This is remainder of the AXP717 fix series, containing support for the
boost regulator. This is meant to increase the battery voltage to the 5
volts required to provide the USB VBUS power.
It's the usual trinity of DT bindings patch (1/3), the MFD part
describing the PMIC registers (2/3) and the final patch to model the
regulator (3/3).
Compared to v2, this drops the merged patches, and just retains the
boost related parts. It also changes the internal name of the register
to AXP717_MODULE_EN_CONTROL_2, since there is another control register
we will need later for battery support.
|
|
The X-Powers AXP717 contains a boost regulator, that it meant to provide
the 5V USB VBUS voltage when the devices operates on battery.
Add the name "boost" to the regexp describing the allowed node names,
to allow the regulator to be described in the devicetree.
Signed-off-by: Andre Przywara <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Lee Jones <[email protected]>
Reviewed-by: Chen-Yu Tsai <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge OPP Updates for 6.12 from Viresh Kumar:
"- Update maintainers for operating-points-v2-ti-cpu file (Dhruva Gole).
- Drop unnecessary of_match_ptr() for TI driver (Rob Herring)."
* tag 'opp-updates-6.12' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: operating-points-v2-ti-cpu: Update maintainers
opp: ti: Drop unnecessary of_match_ptr()
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.12
This pull request contains the interconnect changes for the 6.12-rc1 merge
window. It contains new drivers and fixes with the following highlights:
Driver changes:
- New driver for MSM8976 platforms
- New driver for MSM8937 platforms
- Enable sync_state for SM8250 platforms
- Enable QoS support for QCS404
- Add ab_coeff bandwidth adjustments for MSM8953
- Drop the unsupported yet DISP nodes on SM8350 platforms
- Fix missed num_nodes initialization in icc-clk driver
- Misc DT and documentation fixes
Signed-off-by: Georgi Djakov <[email protected]>
* tag 'icc-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: qcom: Do not require reg for sc8180x virt NoCs
dt-bindings: interconnect: qcom-bwmon: Document SA8775p bwmon compatibles
dt-bindings: interconnect: qcom: msm8953: Fix 'See also' in description
interconnect: qcom: msm8953: Add ab_coeff
dt-bindings: interconnect: qcom: msm8939: Fix example
interconnect: qcom: qcs404: Add regmaps and more bus descriptions
interconnect: qcom: qcs404: Mark AP-owned nodes as such
interconnect: qcom: Add MSM8937 interconnect provider driver
interconnect: qcom: sm8250: Enable sync_state
dt-bindings: interconnect: qcom,sm8350: drop DISP nodes
interconnect: qcom: sm8350: drop DISP nodes
dt-bindings: interconnect: qcom: Add Qualcomm MSM8937 NoC
interconnect: qcom: Add MSM8976 interconnect provider driver
dt-bindings: interconnect: qcom: Add Qualcomm MSM8976 NoC
interconnect: icc-clk: Add missed num_nodes initialization
dt-bindings: interconnect: qcom,rpmh: correct sm8150 camnoc
|
|
Add compatible string for Rockchip RK3576 timer.
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Add compatible for smmu representing support on SA8255p.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Nikunj Kela <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Add an initial binding for the Arm NI-700 interconnect PMU. As with the
Arm CMN family, there are already future NI products on the roadmap, so
the overall binding is named generically just in case any
non-discoverable incompatibility between generations crops up.
Cc: [email protected]
Reviewed-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Link: https://lore.kernel.org/r/5f86237580219116de37e5e54d8b7eb0c9ed580d.1725470837.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 6.12
1. Support alpha blending
2. Remove cl in struct cmdq_pkt
3. Fixup for ovl adaptor
4. Declare Z Position for all planes
5. Drop unnecessary check for property presence
6. Add dsi per-frame lp code for mt8188
7. Fix missing configuration flags in mtk_crtc_ddp_config()
8. Use spin_lock_irqsave() for CRTC event lock
9. Add power domain binding to the mediatek DPI controller
Signed-off-by: Dave Airlie <[email protected]>
From: Chun-Kuang Hu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Convert binding doc rotary-encoder.txt to yaml format.
Additional change:
- Only keep one example.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mn-dimonoff-gateway-evk.dtb: /rotary-encoder:
failed to match any schema with compatible: ['rotary-encoder']
Signed-off-by: Frank Li <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Bring in changes removing support for platform data from matrix-keypad
driver.
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/phy/phy_device.c
2560db6ede1a ("net: phy: Fix missing of_node_put() for leds")
1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()")
https://lore.kernel.org/[email protected]
Adjacent changes:
drivers/net/ethernet/xilinx/xilinx_axienet.h
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop")
76abb5d675c4 ("net: xilinx: axienet: Add statistics support")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A zpos normalization fix for komeda, a register bitmask fix for nouveau,
a memory leak fix for imagination, three fixes for the recent bridge
HDMI work, a potential DoS fix and a cache coherency for panthor, a
change of panel compatible and a deferred-io fix when used with
non-highmem memory.
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905-original-radical-guan-e7a2ae@houat
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner SoC device tree changes for 6.12
ARM64 device tree and binding-only changes
- Move PMIC on RG35XX boards from RSB (Allwinner proprietary bus) to I2C
- Introduce Anbernic RG35XX-SP board
- Enable charger on RG35XX boards
- Add thermal trip points for Allwinner A64 GPU
* tag 'sunxi-dt-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a64: Add GPU thermal trips to the SoC dtsi
arm64: dts: allwinner: h700: Add charger for Anbernic RG35XX
arm64: dts: allwinner: h700: Add Anbernic RG35XX-SP
arm64: dts: allwinner: h616: Change RG35XX Series from r_rsb to r_i2c
arm64: dts: allwinner: h616: Add r_i2c pinctrl nodes
dt-bindings: arm: sunxi: Add Anbernic RG35XXSP
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
* clk-imx: (22 commits)
clk: imx: composite-7ulp: Use NULL instead of 0
clk: imx: add missing MODULE_DESCRIPTION() macros
clk: imx: clk-imx8mp: Allow media_disp pixel clock reconfigure parent rate
clk: imx: fracn-gppll: update rate table
clk: imx: imx8qxp: Parent should be initialized earlier than the clock
clk: imx: imx8qxp: Register dc0_bypass0_clk before disp clk
clk: imx: imx8qxp: Add clock muxes for MIPI and PHY ref clocks
clk: imx: imx8qxp: Add LVDS bypass clocks
clk: imx: imx8mm: Change the 'nand_usdhc_bus' clock to non-critical one
clk: imx: imx8mn: add sai7_ipg_clk clock settings
clk: imx: add CLK_SET_RATE_PARENT for lcdif_pixel_src for i.MX7D
clk: imx: Remove CLK_SET_PARENT_GATE for DRAM mux for i.MX7D
clk: imx: imx8mp: fix clock tree update of TF-A managed clocks
clk: imx: fracn-gppll: fix fractional part of PLL getting lost
clk: imx: composite-7ulp: Check the PCC present bit
clk: imx: composite-93: keep root clock on when mcore enabled
clk: imx: composite-8m: Enable gate clk with mcore_booted
clk: imx: imx6ul: fix default parent for enet*_ref_sel
clk: imx: clk-audiomix: Correct parent clock for earc_phy and audpll
clk: imx: clk-audiomix: Add CLK_SET_RATE_PARENT flags for clocks
...
|
|
Another batch of compatibles unlikely to ever be documented. It's
mostly old PowerMAC and PPC stuff found in DT compatible API calls.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Rob Herring (Arm) <[email protected]>
|
|
The flexspi on imx8ulp only has 16 number of LUTs, it is different
with flexspi on other imx SoC which has 32 number of LUTs.
Fixes: ef89fd56bdfc ("arm64: dts: imx8ulp: add flexspi node")
Cc: [email protected]
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Haibo Chen <[email protected]>
Reviewed-by: Frank Li <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|