| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Framework:
- Introduce ExpressWire library
New Drivers:
- Add support for ON Semiconductor NCP5623 RGB LED Driver
New Device Support:
- Add support for PM660L to Qualcomm's LPG driver
New Functionality:
- Dynamically load modules required for the default-trigger
- Add some support for suspend and resume
- Allow LEDs to remain lit during suspend
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Fix include lists; alphabetise, remove unused, explicitly add used
- Add new led_match_default_trigger to avoid duplication
- Add module alias' to aid auto-loading
- Default to hw_control if no others are specified
- De-bloat the supported link speed attribute lists
- Remove superfluous code and simplify overall
- Constify some variables
Bug Fixes:
- Prevent kernel panic when renaming the net interface
- Fix Kconfig related build errors
- Ensure mutexes are unlocked prior to destroying them
- Provide clean-up between state changes to avoid invalid state
- Fix some broken kernel-doc headers"
* tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
leds: ncp5623: Add MS suffix to time defines
leds: Add NCP5623 multi-led driver
dt-bindings: leds: Add NCP5623 multi-LED Controller
leds: mlxreg: Drop an excess struct mlxreg_led_data member
leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name
leds: lm3601x: Fix struct lm3601_led kernel-doc warnings
leds: Fix ifdef check for gpio_led_register_device()
dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
leds: sgm3140: Add missing timer cleanup and flash gpio control
leds: expresswire: Don't depend on NEW_LEDS
Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
leds: aw2013: Unlock mutex before destroying it
leds: qcom-lpg: Add QCOM_PBS dependency
leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend
leds: trigger: netdev: Fix kernel panic on interface rename trig notify
leds: qcom-lpg: Add PM660L configuration and compatible
leds: spi-byte: Use devm_led_classdev_register_ext()
leds: pca963x: Add support for suspend and resume
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Amphenol ChipCap 2
- ASPEED g6 PWM/Fan tach
- Astera Labs PT5161L retimer
- ASUS ROG RYUJIN II 360 AIO cooler
- LTC4282
- Microsoft Surface devices
- MPS MPQ8785 Synchronous Step-Down Converter
- NZXT Kraken X and Z series AIO CPU coolers
Additional chip support in existing drivers:
- Ayaneo Air Plus 7320u (oxp-sensors)
- INA260 (ina2xx)
- XPS 9315 (dell-smm)
- MSI customer ID (nct6683)
Devicetree bindings updates:
- Common schema for hardware monitoring devices
- Common schema for fans
- Update chip descriptions to use common schema
- Document regulator properties in several drivers
- Explicit bindings for infineon buck converters
Other improvements:
- Replaced rbtree with maple tree register cache in several drivers
- Added support for humidity min/max alarm and volatage fault
attributes to hwmon core
- Dropped non-functional I2C_CLASS_HWMON support for drivers w/o
detect()
- Dropped obsolete and redundant entried from MAINTAINERS
- Cleaned up axi-fan-control and coretemp drivers
- Minor fixes and improvements in several other drivers"
* tag 'hwmon-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (70 commits)
hwmon: (dell-smm) Add XPS 9315 to fan control whitelist
hwmon: (aspeed-g6-pwm-tacho): Support for ASPEED g6 PWM/Fan tach
dt-bindings: hwmon: Support Aspeed g6 PWM TACH Control
dt-bindings: hwmon: fan: Add fan binding to schema
dt-bindings: hwmon: tda38640: Add interrupt & regulator properties
hwmon: (amc6821) add of_match table
dt-bindings: hwmon: lm75: use common hwmon schema
hwmon: (sis5595) drop unused DIV_TO_REG function
dt-bindings: hwmon: reference common hwmon schema
dt-bindings: hwmon: lltc,ltc4286: use common hwmon schema
dt-bindings: hwmon: adi,adm1275: use common hwmon schema
dt-bindings: hwmon: ti,ina2xx: use common hwmon schema
dt-bindings: hwmon: add common properties
hwmon: (pmbus/ir38064) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/lm25066) Use PMBUS_REGULATOR_ONE to declare regulator
hwmon: (pmbus/tda38640) Use PMBUS_REGULATOR_ONE to declare regulator
regulator: dt-bindings: promote infineon buck converters to their own binding
dt-bindings: hwmon/pmbus: ti,lm25066: document regulators
dt-bindings: hwmon: nuvoton,nct6775: Add compatible value for NCT6799
MAINTAINERS: Drop redundant hwmon entries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The biggest feature is the locking overhaul. Up until now the
synchronization in the GPIO subsystem was broken. There was a single
spinlock "protecting" multiple data structures but doing it wrong (as
evidenced by several places where it would be released when a sleeping
function was called and then reacquired without checking the protected
state).
We tried to use an RW semaphore before but the main issue with GPIO is
that we have drivers implementing the interfaces in both sleeping and
non-sleeping ways as well as user-facing interfaces that can be called
both from process as well as atomic contexts. Both ends converge in
the same code paths that can use neither spinlocks nor mutexes. The
only reasonable way out is to use SRCU and go mostly lockless. To that
end: we add several SRCU structs in relevant places and use them to
assure consistency between API calls together with atomic reads and
writes of GPIO descriptor flags where it makes sense.
This code has spent several weeks in next and has received several
fixes in the first week or two after which it stabilized nicely. The
GPIO subsystem is now resilient to providers being suddenly unbound.
We managed to also remove the existing character device RW semaphore
and the obsolete global spinlock.
Other than the locking rework we have one new driver (for Chromebook
EC), much appreciated documentation improvements from Kent and the
regular driver improvements, DT-bindings updates and GPIOLIB core
tweaks.
Serialization rework:
- use SRCU to serialize access to the global GPIO device list, to
GPIO device structs themselves and to GPIO descriptors
- make the GPIO subsystem resilient to the GPIO providers being
unbound while the API calls are in progress
- don't dereference the SRCU-protected chip pointer if the
information we need can be obtained from the GPIO device structure
- move some of the information contained in struct gpio_chip to
struct gpio_device to further reduce the need to dereference the
former
- pass the GPIO device struct instead of the GPIO chip to sysfs
callback to, again, reduce the need for accessing the latter
- get GPIO descriptors from the GPIO device, not from the chip for
the same reason
- allow for mostly lockless operation of the GPIO driver API: assure
consistency with SRCU and atomic operations
- remove the global GPIO spinlock
- remove the character device RW semaphore
Core GPIOLIB:
- constify pointers in GPIO API where applicable
- unify the GPIO counting APIs for ACPI and OF
- provide a macro for iterating over all GPIOs, not only the ones
that are requested
- remove leftover typedefs
- pass the consumer device to GPIO core in
devm_fwnode_gpiod_get_index() for improved logging
- constify the GPIO bus type
- don't warn about removing GPIO chips with descriptors still held by
users as we can now handle this situation gracefully
- remove unused logging helpers
- unexport functions that are only used internally in the GPIO
subsystem
- set the device type (assign the relevant struct device_type) for
GPIO devices
New drivers:
- add the ChromeOS EC GPIO driver
Driver improvements:
- allow building gpio-vf610 with COMPILE_TEST as well as disabling it
in menuconfig (before it was always built for i.MX cofigs)
- count the number of EICs using the device properties instead of
hard-coding it in gpio-eic-sprd
- improve the device naming, extend the debugfs output and add
lockdep asserts to gpio-sim
DT bindings:
- document the 'label' property for gpio-pca9570
- convert aspeed,ast2400-gpio bindings to DT schema
- disallow unevaluated properties for gpio-mvebu
- document a new model in renesas,rcar-gpio
Documentation:
- improve the character device kerneldocs in user-space headers
- add proper documentation for the character device uAPI (both v1 and v2)
- move the sysfs and gpio-mockup docs into the "obsolete" section
- improve naming consistency for GPIO terms
- clarify the line values description for sysfs
- minor docs improvements
- improve the driver API contract for setting GPIO direction
- mark unsafe APIs as deprecated in kerneldocs and suggest
replacements
Other:
- remove an obsolete test from selftests"
* tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: sysfs: repair export returning -EPERM on 1st attempt
selftest: gpio: remove obsolete gpio-mockup test
gpiolib: Deduplicate cleanup for-loop in gpiochip_add_data_with_key()
dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema
gpio: acpi: Make acpi_gpio_count() take firmware node as a parameter
gpio: of: Make of_gpio_get_count() take firmware node as a parameter
gpiolib: Pass consumer device through to core in devm_fwnode_gpiod_get_index()
gpio: sim: use for_each_hwgpio()
gpio: provide for_each_hwgpio()
gpio: don't warn about removing GPIO chips with active users anymore
gpio: sim: delimit the fwnode name with a ":" when generating labels
gpio: sim: add lockdep asserts
gpio: Add ChromeOS EC GPIO driver
gpio: constify of_phandle_args in of_find_gpio_device_by_xlate()
gpio: fix memory leak in gpiod_request_commit()
gpio: constify opaque pointer "data" in gpio_device_find()
gpio: cdev: fix a NULL-pointer dereference with DEBUG enabled
gpio: uapi: clarify default_values being logical
gpio: sysfs: fix inverted pointer logic
gpio: don't let lockdep complain about inherently dangerous RCU usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Constification of bus_type pointer
- Preparations for user-space page-fault delivery
- Use a named kmem_cache for IOVA magazines
Intel VT-d changes from Lu Baolu:
- Add RBTree to track iommu probed devices
- Add Intel IOMMU debugfs document
- Cleanup and refactoring
ARM-SMMU Updates from Will Deacon:
- Device-tree binding updates for a bunch of Qualcomm SoCs
- SMMUv2: Support for Qualcomm X1E80100 MDSS
- SMMUv3: Significant rework of the driver's STE manipulation and
domain handling code. This is the initial part of a larger scale
rework aiming to improve the driver's implementation of the
IOMMU-API in preparation for hooking up IOMMUFD support.
AMD-Vi Updates:
- Refactor GCR3 table support for SVA
- Cleanups
Some smaller cleanups and fixes"
* tag 'iommu-updates-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu: Fix compilation without CONFIG_IOMMU_INTEL
iommu/amd: Fix sleeping in atomic context
iommu/dma: Document min_align_mask assumption
iommu/vt-d: Remove scalabe mode in domain_context_clear_one()
iommu/vt-d: Remove scalable mode context entry setup from attach_dev
iommu/vt-d: Setup scalable mode context entry in probe path
iommu/vt-d: Fix NULL domain on device release
iommu: Add static iommu_ops->release_domain
iommu/vt-d: Improve ITE fault handling if target device isn't present
iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected
PCI: Make pci_dev_is_disconnected() helper public for other drivers
iommu/vt-d: Use device rbtree in iopf reporting path
iommu/vt-d: Use rbtree to track iommu probed devices
iommu/vt-d: Merge intel_svm_bind_mm() into its caller
iommu/vt-d: Remove initialization for dynamically heap-allocated rcu_head
iommu/vt-d: Remove treatment for revoking PASIDs with pending page faults
iommu/vt-d: Add the document for Intel IOMMU debugfs
iommu/vt-d: Use kcalloc() instead of kzalloc()
iommu/vt-d: Remove INTEL_IOMMU_BROKEN_GFX_WA
iommu: re-use local fwnode variable in iommu_ops_from_fwnode()
...
|
|
Pick up support for injecting errors via ACPI EINJ into the CXL protocol
for v6.9.
|
|
Export CXL helper functions in einj-cxl.c for getting/injecting
available CXL protocol error types to sysfs under kernel/debug/cxl.
The kernel/debug/cxl/einj_types file will print the available CXL
protocol errors in the same format as the available_error_types
file provided by the einj module. The
kernel/debug/cxl/$dport_dev/einj_inject file is functionally the same
as the error_type and error_inject files provided by the EINJ module,
i.e.: writing an error type into $dport_dev/einj_inject will inject
said error type into the CXL dport represented by $dport_dev.
Reviewed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Ben Cheatham <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Large effort by Eric to lower rtnl_lock pressure and remove locks:
- Make commonly used parts of rtnetlink (address, route dumps
etc) lockless, protected by RCU instead of rtnl_lock.
- Add a netns exit callback which already holds rtnl_lock,
allowing netns exit to take rtnl_lock once in the core instead
of once for each driver / callback.
- Remove locks / serialization in the socket diag interface.
- Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
- Remove the dev_base_lock, depend on RCU where necessary.
- Support busy polling on a per-epoll context basis. Poll length and
budget parameters can be set independently of system defaults.
- Introduce struct net_hotdata, to make sure read-mostly global
config variables fit in as few cache lines as possible.
- Add optional per-nexthop statistics to ease monitoring / debug of
ECMP imbalance problems.
- Support TCP_NOTSENT_LOWAT in MPTCP.
- Ensure that IPv6 temporary addresses' preferred lifetimes are long
enough, compared to other configured lifetimes, and at least 2 sec.
- Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
- Add support for the independent control state machine for bonding
per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
control state machine.
- Add "network ID" to MCTP socket APIs to support hosts with multiple
disjoint MCTP networks.
- Re-use the mono_delivery_time skbuff bit for packets which user
space wants to be sent at a specified time. Maintain the timing
information while traversing veth links, bridge etc.
- Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
- Simplify many places iterating over netdevs by using an xarray
instead of a hash table walk (hash table remains in place, for use
on fastpaths).
- Speed up scanning for expired routes by keeping a dedicated list.
- Speed up "generic" XDP by trying harder to avoid large allocations.
- Support attaching arbitrary metadata to netconsole messages.
Things we sprinkled into general kernel code:
- Enforce VM_IOREMAP flag and range in ioremap_page_range and
introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
bpf_arena).
- Rework selftest harness to enable the use of the full range of ksft
exit code (pass, fail, skip, xfail, xpass).
Netfilter:
- Allow userspace to define a table that is exclusively owned by a
daemon (via netlink socket aliveness) without auto-removing this
table when the userspace program exits. Such table gets marked as
orphaned and a restarting management daemon can re-attach/regain
ownership.
- Speed up element insertions to nftables' concatenated-ranges set
type. Compact a few related data structures.
BPF:
- Add BPF token support for delegating a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application.
- Introduce bpf_arena which is sparse shared memory region between
BPF program and user space where structures inside the arena can
have pointers to other areas of the arena, and pointers work
seamlessly for both user-space programs and BPF programs.
- Introduce may_goto instruction that is a contract between the
verifier and the program. The verifier allows the program to loop
assuming it's behaving well, but reserves the right to terminate
it.
- Extend the BPF verifier to enable static subprog calls in spin lock
critical sections.
- Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops
type.
- Add support for retrieval of cookies for perf/kprobe multi links.
- Support arbitrary TCP SYN cookie generation / validation in the TC
layer with BPF to allow creating SYN flood handling in BPF
firewalls.
- Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF
objects.
Wireless:
- Add SPP (signaling and payload protected) AMSDU support.
- Support wider bandwidth OFDMA, as required for EHT operation.
Driver API:
- Major overhaul of the Energy Efficient Ethernet internals to
support new link modes (2.5GE, 5GE), share more code between
drivers (especially those using phylib), and encourage more
uniform behavior. Convert and clean up drivers.
- Define an API for querying per netdev queue statistics from
drivers.
- IPSec: account in global stats for fully offloaded sessions.
- Create a concept of Ethernet PHY Packages at the Device Tree level,
to allow parameterizing the existing PHY package code.
- Enable Rx hashing (RSS) on GTP protocol fields.
Misc:
- Improvements and refactoring all over networking selftests.
- Create uniform module aliases for TC classifiers, actions, and
packet schedulers to simplify creating modprobe policies.
- Address all missing MODULE_DESCRIPTION() warnings in networking.
- Extend the Netlink descriptions in YAML to cover message
encapsulation or "Netlink polymorphism", where interpretation of
nested attributes depends on link type, classifier type or some
other "class type".
Drivers:
- Ethernet high-speed NICs:
- Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
- Intel (100G, ice, idpf):
- support E825-C devices
- nVidia/Mellanox:
- support devices with one port and multiple PCIe links
- Broadcom (bnxt):
- support n-tuple filters
- support configuring the RSS key
- Wangxun (ngbe/txgbe):
- implement irq_domain for TXGBE's sub-interrupts
- Pensando/AMD:
- support XDP
- optimize queue submission and wakeup handling (+17% bps)
- optimize struct layout, saving 28% of memory on queues
- Ethernet NICs embedded and virtual:
- Google cloud vNIC:
- refactor driver to perform memory allocations for new queue
config before stopping and freeing the old queue memory
- Synopsys (stmmac):
- obey queueMaxSDU and implement counters required by 802.1Qbv
- Renesas (ravb):
- support packet checksum offload
- suspend to RAM and runtime PM support
- Ethernet switches:
- nVidia/Mellanox:
- support for nexthop group statistics
- Microchip:
- ksz8: implement PHY loopback
- add support for KSZ8567, a 7-port 10/100Mbps switch
- PTP:
- New driver for RENESAS FemtoClock3 Wireless clock generator.
- Support OCP PTP cards designed and built by Adva.
- CAN:
- Support recvmsg() flags for own, local and remote traffic on CAN
BCM sockets.
- Support for esd GmbH PCIe/402 CAN device family.
- m_can:
- Rx/Tx submission coalescing
- wake on frame Rx
- WiFi:
- Intel (iwlwifi):
- enable signaling and payload protected A-MSDUs
- support wider-bandwidth OFDMA
- support for new devices
- bump FW API to 89 for AX devices; 90 for BZ/SC devices
- MediaTek (mt76):
- mt7915: newer ADIE version support
- mt7925: radio temperature sensor support
- Qualcomm (ath11k):
- support 6 GHz station power modes: Low Power Indoor (LPI),
Standard Power) SP and Very Low Power (VLP)
- QCA6390 & WCN6855: support 2 concurrent station interfaces
- QCA2066 support
- Qualcomm (ath12k):
- refactoring in preparation for Multi-Link Operation (MLO)
support
- 1024 Block Ack window size support
- firmware-2.bin support
- support having multiple identical PCI devices (firmware needs
to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
- QCN9274: support split-PHY devices
- WCN7850: enable Power Save Mode in station mode
- WCN7850: P2P support
- RealTek:
- rtw88: support for more rtw8811cu and rtw8821cu devices
- rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
- rtlwifi: speed up USB firmware initialization
- rtwl8xxxu:
- RTL8188F: concurrent interface support
- Channel Switch Announcement (CSA) support in AP mode
- Broadcom (brcmfmac):
- per-vendor feature support
- per-vendor SAE password setup
- DMI nvram filename quirk for ACEPC W5 Pro"
* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
nexthop: Fix out-of-bounds access during attribute validation
nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
nexthop: Only parse NHA_OP_FLAGS for get messages that require it
bpf: move sleepable flag from bpf_prog_aux to bpf_prog
bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
selftests/bpf: Add kprobe multi triggering benchmarks
ptp: Move from simple ida to xarray
vxlan: Remove generic .ndo_get_stats64
vxlan: Do not alloc tstats manually
devlink: Add comments to use netlink gen tool
nfp: flower: handle acti_netdevs allocation failure
net/packet: Add getsockopt support for PACKET_COPY_THRESH
net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
selftests/bpf: Add bpf_arena_htab test.
selftests/bpf: Add bpf_arena_list test.
selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
bpf: Add helper macro bpf_addr_space_cast()
libbpf: Recognize __arena global variables.
bpftool: Recognize arena map type
...
|
|
Pull documentation updates from Jonathan Corbet:
"A moderatly busy cycle for development this time around.
- Some cleanup of the main index page for easier navigation
- Rework some of the other top-level pages for better readability
and, with luck, fewer merge conflicts in the future.
- Submit-checklist improvements, hopefully the first of many.
- New Italian translations
- A fair number of kernel-doc fixes and improvements. We have also
dropped the recommendation to use an old version of Sphinx.
- A new document from Thorsten on bisection
... and lots of fixes and updates"
* tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits)
docs: verify/bisect: fixes, finetuning, and support for Arch
docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs
docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst
docs: submit-checklist: use subheadings
docs: submit-checklist: structure by category
docs: new text on bisecting which also covers bug validation
docs: drop the version constraints for sphinx and dependencies
docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4
docs: Restore "smart quotes" for quotes
docs/zh_CN: accurate translation of "function"
docs: Include simplified link titles in main index
docs: Correct formatting of title in admin-guide/index.rst
docs: kernel_feat.py: fix build error for missing files
MAINTAINERS: Set the field name for subsystem profile section
kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO
Fixed case issue with 'fault-injection' in documentation
kernel-doc: handle #if in enums as well
Documentation: update mailing list addresses
doc: kerneldoc.py: fix indentation
scripts/kernel-doc: simplify signature printing
...
|
|
Add read/write latencies and bandwidth sysfs attributes for the enabled CXL
region. The bandwidth is the aggregated bandwidth of all devices that
contribute to the CXL region. The latency is the worst latency of the
device amongst all the devices that contribute to the CXL region.
Reviewed-by: Jonathan Cameron <[email protected]>
Tested-by: Jonathan Cameron <[email protected]>
Signed-off-by: Dave Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dan Williams <[email protected]>
|
|
RFDS is a CPU vulnerability that may allow userspace to infer kernel
stale data previously used in floating point registers, vector registers
and integer registers. RFDS only affects certain Intel Atom processors.
Intel released a microcode update that uses VERW instruction to clear
the affected CPU buffers. Unlike MDS, none of the affected cores support
SMT.
Add RFDS bug infrastructure and enable the VERW based mitigation by
default, that clears the affected buffers just before exiting to
userspace. Also add sysfs reporting and cmdline parameter
"reg_file_data_sampling" to control the mitigation.
For details see:
Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
Signed-off-by: Pawan Gupta <[email protected]>
Signed-off-by: Dave Hansen <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
|
|
Debugfs isn't always available in production builds that try to squeeze
every single byte out of the kernel image, but we still need a way to
toggle the timestamp and cycle counter registers so that jobs can be
profiled for fdinfo's drm engine and cycle calculations.
Drop the debugfs knob and replace it with a sysfs file that accomplishes
the same functionality, and document its ABI in a separate file.
Signed-off-by: Adrián Larumbe <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>
Reviewed-by: Steven Price <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
softnet_data->time_squeeze is sometimes used as a proxy for
host overload or indication of scheduling problems. In practice
this statistic is very noisy and has hard to grasp units -
e.g. is 10 squeezes a second to be expected, or high?
Delaying network (NAPI) processing leads to drops on NIC queues
but also RTT bloat, impacting pacing and CA decisions.
Stalls are a little hard to detect on the Rx side, because
there may simply have not been any packets received in given
period of time. Packet timestamps help a little bit, but
again we don't know if packets are stale because we're
not keeping up or because someone (*cough* cgroups)
disabled IRQs for a long time.
We can, however, use Tx as a proxy for Rx stalls. Most drivers
use combined Rx+Tx NAPIs so if Tx gets starved so will Rx.
On the Tx side we know exactly when packets get queued,
and completed, so there is no uncertainty.
This patch adds stall checks to BQL. Why BQL? Because
it's a convenient place to add such checks, already
called by most drivers, and it has copious free space
in its structures (this patch adds no extra cache
references or dirtying to the fast path).
The algorithm takes one parameter - max delay AKA stall
threshold and increments a counter whenever NAPI got delayed
for at least that amount of time. It also records the length
of the longest stall.
To be precise every time NAPI has not polled for at least
stall thrs we check if there were any Tx packets queued
between last NAPI run and now - stall_thrs/2.
Unlike the classic Tx watchdog this mechanism does not
ignore stalls caused by Tx being disabled, or loss of link.
I don't think the check is worth the complexity, and
stall is a stall, whether due to host overload, flow
control, link down... doesn't matter much to the application.
We have been running this detector in production at Meta
for 2 years, with the threshold of 8ms. It's the lowest
value where false positives become rare. There's still
a constant stream of reported stalls (especially without
the ksoftirqd deferral patches reverted), those who like
their stall metrics to be 0 may prefer higher value.
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Breno Leitao <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
'x86/amd' and 'core' into next
|
|
The 'led-trigger-tty' uses the same naming in the ABI documentation as
the 'led-trigger-netdev'. Which leads to the following warning when
building the documentation.
Warning: /sys/class/leds/<led>/rx is defined 2 times:
Documentation/ABI/testing/sysfs-class-led-trigger-tty:7
Documentation/ABI/testing/sysfs-class-led-trigger-netdev:49
Warning: /sys/class/leds/<led>/tx is defined 2 times:
Documentation/ABI/testing/sysfs-class-led-trigger-tty:15
Documentation/ABI/testing/sysfs-class-led-trigger-netdev:34
Renaming the 'What' path by prefixing it with 'tty_' solves this problem.
Fixes: 6dec659896b4 ("leds: ledtrig-tty: Add additional line state evaluation")
Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Florian Eckert <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
(cherry picked from commit ea411a8422c1d7f8193d726fb76ba09534b6a5fe)
Signed-off-by: Lee Jones <[email protected]>
|
|
Document now hidable link speed modes for the LED netdev trigger.
Link speed modes are now showed only if the named network device
supports them and are hidden if not.
Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Marek Behún <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lee Jones <[email protected]>
|
|
Linux 6.8-rc7
|
|
Motivation
----------
The binary device object store (BOS) of a USB device consists of the BOS
descriptor followed by a set of device capability descriptors. One that is
of interest to users is the platform descriptor. This contains a 128-bit
UUID and arbitrary data, and it allows parties outside of USB-IF to add
additional metadata about a USB device in a standards-compliant manner.
Notable examples include the WebUSB and Microsoft OS 2.0 descriptors.
The kernel already retrieves and caches the BOS from USB devices if its
bcdUSB is >= 0x0201. Because the BOS is flexible and extensible, we export
the entire BOS to sysfs so users can retrieve whatever device capabilities
they desire, without requiring USB I/O or elevated permissions.
Implementation
--------------
Add bos_descriptors attribute to sysfs. This is a binary file and it works
the same way as the existing descriptors attribute. The file exists only if
the BOS is present in the USB device.
Also create a binary attribute group, so the driver core can handle the
creation of both the descriptors and bos_descriptors attributes in sysfs.
Signed-off-by: Elbert Mai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, cleanups and features for 6.9
New device support
=================
adi,hmc425a
- Add support for LTC6373 Instrumentation Amplifier.
microchip,pac1934
- New driver supporting PAC1931, PAC1932, PAC1933 and PAC1934 power monitoring
chips with accumulators.
voltafield,af8133j
- New driver for the AF8133J 3 axis magnetometer.
Docs
====
New general documentation of device buffers, and a specific section on
the adi,adis16475 IMU
Features
========
kionix,kxcjk-1013
- Add support for ACPI ROTM (Microsoft defined ACPI method) to get rotation
matrix.
ti,tmp117
- Add missing vcc-supply control and binding.
Cleanups and minor fixes
========================
Tree-wide
- Corrected headers to remove linux/of.h from a bunch of drivers
that only had it to get to linux/mod_devicetable.h
- dt binding cleanup to drop redundant type from label properties.
adi,hmc425a
- Fix constraints on GPIO array sizes for different devices.
adi,ltc2983
- Use spi_get_device_match_data instead of open coding similar.
- Update naming of fw parsing function to reflect that it is not longer
dt only.
- Set the chip name explicitly to reduce fragility resulting from different
entries in the various ID tables.
bosch,bmg160
- Add spi-max-frequency property and limit to dt-binding.
microchip,mcp320x
- Use devm_* to simplify device removal and error handling.
nxp,imx93
- Drop a non existent 4th interrupt from bindings.
qcom,mp8xxx-xoadc
- Drop unused kerneldoc
renesas,isl29501
- Actually use the of_match table.
rockchip,saradc
- Fix channel bitmask
- Fix write masks
- Replace custom handling of optional reset control with how it should be
done.
ti,ads1298
- Fix error code to not return a successfully obtained regulator.
- Avoid a divide by zero when setting frequency.
ti,hdc2010
- Add missing interrupts dt binding property
vishay,veml6075
- Make vdd-supply required in the dt-binding.
* tag 'iio-for-6.9b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (42 commits)
dt-bindings: iio: gyroscope: bosch,bmg160: add spi-max-frequency
dt-bindings: iio: adc: imx93: drop the 4th interrupt
iio: proximity: isl29501: make use of of_device_id table
iio: adc: qcom-pm8xxx-xoadc: drop unused kerneldoc struct pm8xxx_chan_info member
dt-bindings: iio: adc: drop redundant type from label
dt-bindings: iio: ti,tmp117: add optional label property
MAINTAINERS: Add an entry for AF8133J driver
iio: magnetometer: add a driver for Voltafield AF8133J magnetometer
dt-bindings: iio: magnetometer: Add Voltafield AF8133J
dt-bindings: vendor-prefix: Add prefix for Voltafield
iio: adc: rockchip_saradc: replace custom logic with devm_reset_control_get_optional_exclusive
iio: adc: rockchip_saradc: use mask for write_enable bitfield
iio: adc: rockchip_saradc: fix bitmask for channels on SARADCv2
dt-bindings: iio: light: vishay,veml6075: make vdd-supply required
iio: adc: adding support for PAC193x
dt-bindings: iio: adc: adding support for PAC193X
iio: temperature: ltc2983: explicitly set the name in chip_info
iio: temperature: ltc2983: rename ltc2983_parse_dt()
iio: temperature: ltc2983: make use of spi_get_device_match_data()
iio: adc: ti-ads1298: prevent divide by zero in ads1298_set_samp_freq()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Suzuki writes:
coresight: hwtracing subsystem updates for v6.9
Changes targeting Linux v6.9 include:
- CoreSight: Enable W=1 warnings as default
- CoreSight: Clean up sysfs/perf mode handling for tracing
- Support for Qualcomm TPDM CMB Dataset
- Miscellaneous fixes to the CoreSight subsystem
- Fix for hisi_ptt PMU to reject events targeting other PMUs
Signed-off-by: Suzuki K Poulose <[email protected]>
* tag 'coresight-next-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux: (32 commits)
coresight-tpda: Change qcom,dsb-element-size to qcom,dsb-elem-bits
dt-bindings: arm: qcom,coresight-tpdm: Rename qcom,dsb-element-size
hwtracing: hisi_ptt: Move type check to the beginning of hisi_ptt_pmu_event_init()
coresight: tpdm: Fix build break due to uninitialised field
coresight: etm4x: Set skip_power_up in etm4_init_arch_data function
coresight-tpdm: Add msr register support for CMB
dt-bindings: arm: qcom,coresight-tpdm: Add support for TPDM CMB MSR register
coresight-tpdm: Add timestamp control register support for the CMB
coresight-tpdm: Add pattern registers support for CMB
coresight-tpdm: Add support to configure CMB
coresight-tpda: Add support to configure CMB element
coresight-tpdm: Add CMB dataset support
dt-bindings: arm: qcom,coresight-tpdm: Add support for CMB element size
coresight-tpdm: Optimize the useage of tpdm_has_dsb_dataset
coresight-tpdm: Optimize the store function of tpdm simple dataset
coresight: Add helper for setting csdev->mode
coresight: Add a helper for getting csdev->mode
coresight: Add helper for atomically taking the device
coresight: Add explicit member initializers to coresight_dev_type
coresight: Remove unused stubs
...
|
|
This document guides users to dump the Intel IOMMU internals by debugfs.
Signed-off-by: Jingqi Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lu Baolu <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Use it to simulate no free segment case during block allocation.
Signed-off-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
|
|
This is the iio driver for Microchip
PAC193X series of Power Monitor with Accumulator chip family.
Signed-off-by: Marius Cristea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Cameron <[email protected]>
|
|
The servers for the @codeaurora domain are long retired and any messages
addressed there will bounce. Sahitya Tummala has a .mailmap entry to an
updated address, but the documentation files still list @codeaurora
which might be a problem for anyone reading the documentation directly.
Update the documentation files to match the .mailmap update.
Signed-off-by: Jeffrey Hugo <[email protected]>
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
|
|
This attributes have been recently introduced and require the
corresponding ABI documentation.
Signed-off-by: Javier Carrasco <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Update DAMON ABI document for the quota goal target_metric file.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Update the DAMON ABI doc for the effective_bytes sysfs file and the
kdamond state file input command for updating the content of the file.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: SeongJae Park <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Remove unneeded colon in the auto_reset section.
This resolves the following errors when building the documentation:
Documentation/ABI/testing/sysfs-driver-qat:146: ERROR: Unexpected indentation.
Documentation/ABI/testing/sysfs-driver-qat:146: WARNING: Block quote ends without a blank line; unexpected unindent.
Fixes: f5419a4239af ("crypto: qat - add auto reset on error")
Reported-by: Stephen Rothwell <[email protected]>
Closes: https://lore.kernel.org/linux-kernel/[email protected]/T/
Signed-off-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
The virtiofs filesystem is mounted using a "tag" which is exported by
the virtiofs device:
# mount -t virtiofs <tag> /mnt
The virtiofs driver knows about all the available tags but these are
currently not exported to user space.
People have asked for these tags to be exported to user space. Most
recently Lennart Poettering has asked for it as he wants to scan the
tags and mount virtiofs automatically in certain cases.
https://gitlab.com/virtio-fs/virtiofsd/-/issues/128
This patch exports tags at /sys/fs/virtiofs/<N>/tag where N is the id of
the virtiofs device. The filesystem tag can be obtained by reading this
"tag" file.
There is also a symlink at /sys/fs/virtiofs/<N>/device that points to
the virtiofs device that exports this tag.
This patch converts the existing struct virtio_fs into a full kobject.
It already had a refcount so it's an easy change. The virtio_fs objects
can then be exposed in a kset at /sys/fs/virtiofs/. Note that virtio_fs
objects may live slightly longer than we wish for them to be exposed to
userspace, so kobject_del() is called explicitly when the underlying
virtio_device is removed. The virtio_fs object is freed when all
references are dropped (e.g. active mounts) but disappears as soon as
the virtiofs device is gone.
Originally-by: Vivek Goyal <[email protected]>
Signed-off-by: Stefan Hajnoczi <[email protected]>
Reviewed-by: Vivek Goyal <[email protected]>
Signed-off-by: Miklos Szeredi <[email protected]>
|
|
This adds the following new sysfs file tracking the number of successfully
released pages from a given CMA heap area. This file will be available
via CONFIG_CMA_SYSFS and help in determining active CMA pages available on
the CMA heap area. This adds a new 'nr_pages_released' (CONFIG_CMA_SYSFS)
into 'struct cma' which gets updated during cma_release().
/sys/kernel/mm/cma/<cma-heap-area>/release_pages_success
After this change, an user will be able to find active CMA pages available
in a given CMA heap area via the following method.
Active pages = alloc_pages_success - release_pages_success
That's valuable information for both software designers, and system admins
as it allows them to tune the number of CMA pages available in the system.
This increases user visibility for allocated CMA area and its
utilization.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Patch series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension", v5.
Weighted interleave is a new interleave policy intended to make use of
heterogeneous memory environments appearing with CXL.
The existing interleave mechanism does an even round-robin distribution of
memory across all nodes in a nodemask, while weighted interleave
distributes memory across nodes according to a provided weight. (Weight =
# of page allocations per round)
Weighted interleave is intended to reduce average latency when bandwidth
is pressured - therefore increasing total throughput.
In other words: It allows greater use of the total available bandwidth in
a heterogeneous hardware environment (different hardware provides
different bandwidth capacity).
As bandwidth is pressured, latency increases - first linearly and then
exponentially. By keeping bandwidth usage distributed according to
available bandwidth, we therefore can reduce the average latency of a
cacheline fetch.
A good explanation of the bandwidth vs latency response curve:
https://mahmoudhatem.wordpress.com/2017/11/07/memory-bandwidth-vs-latency-response-curve/
From the article:
```
Constant region:
The latency response is fairly constant for the first 40%
of the sustained bandwidth.
Linear region:
In between 40% to 80% of the sustained bandwidth, the
latency response increases almost linearly with the bandwidth
demand of the system due to contention overhead by numerous
memory requests.
Exponential region:
Between 80% to 100% of the sustained bandwidth, the memory
latency is dominated by the contention latency which can be
as much as twice the idle latency or more.
Maximum sustained bandwidth :
Is 65% to 75% of the theoretical maximum bandwidth.
```
As a general rule of thumb:
* If bandwidth usage is low, latency does not increase. It is
optimal to place data in the nearest (lowest latency) device.
* If bandwidth usage is high, latency increases. It is optimal
to place data such that bandwidth use is optimized per-device.
This is the top line goal: Provide a user a mechanism to target using the
"maximum sustained bandwidth" of each hardware component in a heterogenous
memory system.
For example, the stream benchmark demonstrates that 1:1 (default)
interleave is actively harmful, while weighted interleave can be
beneficial. Default interleave distributes data such that too much
pressure is placed on devices with lower available bandwidth.
Stream Benchmark (vs DRAM, 1 Socket + 1 CXL Device)
Default interleave : -78% (slower than DRAM)
Global weighting : -6% to +4% (workload dependant)
Targeted weights : +2.5% to +4% (consistently better than DRAM)
Global means the task-policy was set (set_mempolicy), while targeted means
VMA policies were set (mbind2). We see weighted interleave is not always
beneficial when applied globally, but is always beneficial when applied to
bandwidth-driving memory regions.
There are 4 patches in this set:
1) Implement system-global interleave weights as sysfs extension
in mm/mempolicy.c. These weights are RCU protected, and a
default weight set is provided (all weights are 1 by default).
In future work, we intend to expose an interface for HMAT/CDAT
code to set reasonable default values based on the memory
configuration of the system discovered at boot/hotplug.
2) A mild refactor of some interleave-logic for re-use in the
new weighted interleave logic.
3) MPOL_WEIGHTED_INTERLEAVE extension for set_mempolicy/mbind
4) Protect interleave logic (weighted and normal) with the
mems_allowed seq cookie. If the nodemask changes while
accessing it during a rebind, just retry the access.
Included below are some performance and LTP test information,
and a sample numactl branch which can be used for testing.
= Performance summary =
(tests may have different configurations, see extended info below)
1) MLC (W2) : +38% over DRAM. +264% over default interleave.
MLC (W5) : +40% over DRAM. +226% over default interleave.
2) Stream : -6% to +4% over DRAM, +430% over default interleave.
3) XSBench : +19% over DRAM. +47% over default interleave.
= LTP Testing Summary =
existing mempolicy & mbind tests: pass
mempolicy & mbind + weighted interleave (global weights): pass
= version history
v5:
- style fixes
- mems_allowed cookie protection to detect rebind issues,
prevents spurious allocation failures and/or mis-allocations
- sparse warning fixes related to __rcu on local variables
=====================================================================
Performance tests - MLC
From - Ravi Jonnalagadda <[email protected]>
Hardware: Single-socket, multiple CXL memory expanders.
Workload: W2
Data Signature: 2:1 read:write
DRAM only bandwidth (GBps): 298.8
DRAM + CXL (default interleave) (GBps): 113.04
DRAM + CXL (weighted interleave)(GBps): 412.5
Gain over DRAM only: 1.38x
Gain over default interleave: 2.64x
Workload: W5
Data Signature: 1:1 read:write
DRAM only bandwidth (GBps): 273.2
DRAM + CXL (default interleave) (GBps): 117.23
DRAM + CXL (weighted interleave)(GBps): 382.7
Gain over DRAM only: 1.4x
Gain over default interleave: 2.26x
=====================================================================
Performance test - Stream
From - Gregory Price <[email protected]>
Hardware: Single socket, single CXL expander
numactl extension: https://github.com/gmprice/numactl/tree/weighted_interleave_master
Summary: 64 threads, ~18GB workload, 3GB per array, executed 100 times
Default interleave : -78% (slower than DRAM)
Global weighting : -6% to +4% (workload dependant)
mbind2 weights : +2.5% to +4% (consistently better than DRAM)
dram only:
numactl --cpunodebind=1 --membind=1 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Function Direction BestRateMBs AvgTime MinTime MaxTime
Copy: 0->0 200923.2 0.032662 0.031853 0.033301
Scale: 0->0 202123.0 0.032526 0.031664 0.032970
Add: 0->0 208873.2 0.047322 0.045961 0.047884
Triad: 0->0 208523.8 0.047262 0.046038 0.048414
CXL-only:
numactl --cpunodebind=1 -w --membind=2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy: 0->0 22209.7 0.288661 0.288162 0.289342
Scale: 0->0 22288.2 0.287549 0.287147 0.288291
Add: 0->0 24419.1 0.393372 0.393135 0.393735
Triad: 0->0 24484.6 0.392337 0.392083 0.394331
Based on the above, the optimal weights are ~9:1
echo 9 > /sys/kernel/mm/mempolicy/weighted_interleave/node1
echo 1 > /sys/kernel/mm/mempolicy/weighted_interleave/node2
default interleave:
numactl --cpunodebind=1 --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy: 0->0 44666.2 0.143671 0.143285 0.144174
Scale: 0->0 44781.6 0.143256 0.142916 0.143713
Add: 0->0 48600.7 0.197719 0.197528 0.197858
Triad: 0->0 48727.5 0.197204 0.197014 0.197439
global weighted interleave:
numactl --cpunodebind=1 -w --interleave=1,2 ./stream_c.exe --ntimes 100 --array-size 400M --malloc
Copy: 0->0 190085.9 0.034289 0.033669 0.034645
Scale: 0->0 207677.4 0.031909 0.030817 0.033061
Add: 0->0 202036.8 0.048737 0.047516 0.053409
Triad: 0->0 217671.5 0.045819 0.044103 0.046755
targted regions w/ global weights (modified stream to mbind2 malloc'd regions))
numactl --cpunodebind=1 --membind=1 ./stream_c.exe -b --ntimes 100 --array-size 400M --malloc
Copy: 0->0 205827.0 0.031445 0.031094 0.031984
Scale: 0->0 208171.8 0.031320 0.030744 0.032505
Add: 0->0 217352.0 0.045087 0.044168 0.046515
Triad: 0->0 216884.8 0.045062 0.044263 0.046982
=====================================================================
Performance tests - XSBench
From - Hyeongtak Ji <[email protected]>
Hardware: Single socket, Single CXL memory Expander
NUMA node 0: 56 logical cores, 128 GB memory
NUMA node 2: 96 GB CXL memory
Threads: 56
Lookups: 170,000,000
Summary: +19% over DRAM. +47% over default interleave.
Performance tests - XSBench
1. dram only
$ numactl -m 0 ./XSBench -s XL –p 5000000
Runtime: 36.235 seconds
Lookups/s: 4,691,618
2. default interleave
$ numactl –i 0,2 ./XSBench –s XL –p 5000000
Runtime: 55.243 seconds
Lookups/s: 3,077,293
3. weighted interleave
numactl –w –i 0,2 ./XSBench –s XL –p 5000000
Runtime: 29.262 seconds
Lookups/s: 5,809,513
=====================================================================
LTP Tests: https://github.com/gmprice/ltp/tree/mempolicy2
= Existing tests
set_mempolicy, get_mempolicy, mbind
MPOL_WEIGHTED_INTERLEAVE added manually to test basic functionality but
did not adjust tests for weighting. Basically the weights were set to 1,
which is the default, and it should behave the same as MPOL_INTERLEAVE if
logic is correct.
== set_mempolicy01 : passed 18, failed 0
== set_mempolicy02 : passed 10, failed 0
== set_mempolicy03 : passed 64, failed 0
== set_mempolicy04 : passed 32, failed 0
== set_mempolicy05 - n/a on non-x86
== set_mempolicy06 : passed 10, failed 0
this is set_mempolicy02 + MPOL_WEIGHTED_INTERLEAVE
== set_mempolicy07 : passed 32, failed 0
set_mempolicy04 + MPOL_WEIGHTED_INTERLEAVE
== get_mempolicy01 : passed 12, failed 0
change: added MPOL_WEIGHTED_INTERLEAVE
== get_mempolicy02 : passed 2, failed 0
== mbind01 : passed 15, failed 0
added MPOL_WEIGHTED_INTERLEAVE
== mbind02 : passed 4, failed 0
added MPOL_WEIGHTED_INTERLEAVE
== mbind03 : passed 16, failed 0
added MPOL_WEIGHTED_INTERLEAVE
== mbind04 : passed 48, failed 0
added MPOL_WEIGHTED_INTERLEAVE
=====================================================================
numactl (set_mempolicy) w/ global weighting test
numactl fork: https://github.com/gmprice/numactl/tree/weighted_interleave_master
command: numactl -w --interleave=0,1 ./eatmem
result (weights 1:1):
0176a000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=32897 N1=32896 kernelpagesize_kB=4
7fceeb9ff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=32768 N1=32769 kernelpagesize_kB=4
50% distribution is correct
result (weights 5:1):
01b14000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=54828 N1=10965 kernelpagesize_kB=4
7f47a1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=54614 N1=10923 kernelpagesize_kB=4
16.666% distribution is correct
result (weights 1:5):
01f07000 weighted interleave:0-1 heap anon=65793 dirty=65793 active=0 N0=10966 N1=54827 kernelpagesize_kB=4
7f17b1dff000 weighted interleave:0-1 anon=65537 dirty=65537 active=0 N0=10923 N1=54614 kernelpagesize_kB=4
16.666% distribution is correct
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main (void)
{
char* mem = malloc(1024*1024*256);
memset(mem, 1, 1024*1024*256);
for (int i = 0; i < ((1024*1024*256)/4096); i++)
{
mem = malloc(4096);
mem[0] = 1;
}
printf("done\n");
getchar();
return 0;
}
This patch (of 4):
This patch provides a way to set interleave weight information under sysfs
at /sys/kernel/mm/mempolicy/weighted_interleave/nodeN
The sysfs structure is designed as follows.
$ tree /sys/kernel/mm/mempolicy/
/sys/kernel/mm/mempolicy/ [1]
└── weighted_interleave [2]
├── node0 [3]
└── node1
Each file above can be explained as follows.
[1] mm/mempolicy: configuration interface for mempolicy subsystem
[2] weighted_interleave/: config interface for weighted interleave policy
[3] weighted_interleave/nodeN: weight for nodeN
If a node value is set to `0`, the system-default value will be used.
As of this patch, the system-default for all nodes is always 1.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Suggested-by: "Huang, Ying" <[email protected]>
Signed-off-by: Rakie Kim <[email protected]>
Signed-off-by: Honggyu Kim <[email protected]>
Co-developed-by: Gregory Price <[email protected]>
Signed-off-by: Gregory Price <[email protected]>
Co-developed-by: Hyeongtak Ji <[email protected]>
Signed-off-by: Hyeongtak Ji <[email protected]>
Reviewed-by: "Huang, Ying" <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Gregory Price <[email protected]>
Cc: Hasan Al Maruf <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Srinivasulu Thanneeru <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add a sysfs knob for dax devices to control the memmap_on_memory setting
if the dax device were to be hotplugged as system memory.
The default memmap_on_memory setting for dax devices originating via pmem
or hmem is set to 'false' - i.e. no memmap_on_memory semantics, to
preserve legacy behavior. For dax devices via CXL, the default is on.
The sysfs control allows the administrator to override the above defaults
if needed.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Vishal Verma <[email protected]>
Tested-by: Li Zhijian <[email protected]>
Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Reviewed-by: Huang, Ying <[email protected]>
Reviewed-by: Alison Schofield <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Oscar Salvador <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Add the missing sysfs ABI documentation for the device DAX subsystem.
Various ABI attributes under this have been present since v5.1, and more
have been added over time. In preparation for adding a new attribute,
add this file with the historical details.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Vishal Verma <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: David Hildenbrand <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Huang Ying <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Li Zhijian <[email protected]>
Cc: Matthew Wilcox (Oracle) <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Oscar Salvador <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The mailman2 server running on lists.linuxfoundation.org will be shut
down in very imminent future. Update all instances of obsolete list
addresses throughout the tree with their new destinations.
Signed-off-by: Konstantin Ryabitsev <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Link: https://lore.kernel.org/r/20240214-lf-org-list-migration-v1-1-ef1eab4b1543@linuxfoundation.org
|
|
Merge series from Cezary Rojewski <[email protected]>:
The avs-driver continues to be utilized on more recent Intel machines.
As TGL-based (cAVS 2.5) e.g.: RPL, inherit most of the functionality
from previous platforms:
SKL <- APL <- CNL <- ICL <- TGL
rather than putting everything into a single file, the platform-specific
bits are split into cnl/icl/tgl.c files instead. Makes the division clear
and code easier to maintain.
Layout of the patchset:
First are two changes combined together address the sound-clipping
problem, present when only one stream is running - specifically one
CAPTURE stream.
Follow up is naming-scheme adjustment for some of the existing functions
what improves code incohesiveness. As existing IPC/IRQ code operates
solely on cAVS 1.5 architecture, it needs no abstraction. The situation
changes when newer platforms come into the picture. Thus the next two
patches abstract the existing IPC/IRQ handlers so that majority of the
common code can be re-used.
The ICCMAX change stands out a bit - the AudioDSP firmware loading
procedure differs on ICL-based platforms (and onwards) and having a
separate commit makes the situation clear to the developers who are
going to support the solution from LTS perspective. For that reason
I decided not to merge it into the commit introducing the icl.c file.
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / miscdriver fixes from Greg KH:
"Here is a small set of char/misc and IIO driver fixes for 6.8-rc5.
Included in here are:
- lots of iio driver fixes for reported issues
- nvmem device naming fixup for reported problem
- interconnect driver fixes for reported issues
All of these have been in linux-next for a while with no reported the
issues (the nvmem patch was included in a different branch in
linux-next before sent to me for inclusion here)"
* tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
nvmem: include bit index in cell sysfs file name
iio: adc: ad4130: only set GPIO_CTRL if pin is unused
iio: adc: ad4130: zero-initialize clock init data
interconnect: qcom: x1e80100: Add missing ACV enable_mask
interconnect: qcom: sm8650: Use correct ACV enable_mask
iio: accel: bma400: Fix a compilation problem
iio: commom: st_sensors: ensure proper DMA alignment
iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
staging: iio: ad5933: fix type mismatch regression
iio: humidity: hdc3020: fix temperature offset
iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
iio: adc: ad_sigma_delta: ensure proper DMA alignment
iio: imu: adis: ensure proper DMA alignment
iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
iio: imu: bno055: serdev requires REGMAP
iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
iio: pressure: bmp280: Add missing bmp085 to SPI id table
iio: core: fix memleak in iio_device_register_sysfs
interconnect: qcom: sm8550: Enable sync_state
...
|
|
This is probable useful information to have in user space in
general, but it's primarily needed for the xHCI DbC (Debug
Capability). When xHCI DbC is being used, the USB port needs
to be muxed to the xHCI even in device role. In xHCI DbC mode,
the xHCI is the USB device controller.
Tested-by: Uday Bhat <[email protected]>
Signed-off-by: Heikki Krogerus <[email protected]>
Reviewed-by: Prashant Malani <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The debugfs files 'dev_state' and 'dev_timeout' are added.
Users can query the current queue stop status through these two
files. And set the waiting timeout when the queue is released.
dev_state: if dev_timeout is set, dev_state indicates the status
of stopping the queue. 0 indicates that the queue is stopped
successfully. Other values indicate that the queue stops fail.
If dev_timeout is not set, the value of dev_state is 0;
dev_timeout: if the queue fails to stop, the queue is released
after waiting dev_timeout * 20ms.
Signed-off-by: Weili Qian <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Creating sysfs files for all Cells caused a boot failure for linux-6.8-rc1 on
Apple M1, which (in downstream dts files) has multiple nvmem cells that use the
same byte address. This causes the device probe to fail with
[ 0.605336] sysfs: cannot create duplicate filename '/devices/platform/soc@200000000/2922bc000.efuse/apple_efuses_nvmem0/cells/efuse@a10'
[ 0.605347] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S 6.8.0-rc1-arnd-5+ #133
[ 0.605355] Hardware name: Apple Mac Studio (M1 Ultra, 2022) (DT)
[ 0.605362] Call trace:
[ 0.605365] show_stack+0x18/0x2c
[ 0.605374] dump_stack_lvl+0x60/0x80
[ 0.605383] dump_stack+0x18/0x24
[ 0.605388] sysfs_warn_dup+0x64/0x80
[ 0.605395] sysfs_add_bin_file_mode_ns+0xb0/0xd4
[ 0.605402] internal_create_group+0x268/0x404
[ 0.605409] sysfs_create_groups+0x38/0x94
[ 0.605415] devm_device_add_groups+0x50/0x94
[ 0.605572] nvmem_populate_sysfs_cells+0x180/0x1b0
[ 0.605682] nvmem_register+0x38c/0x470
[ 0.605789] devm_nvmem_register+0x1c/0x6c
[ 0.605895] apple_efuses_probe+0xe4/0x120
[ 0.606000] platform_probe+0xa8/0xd0
As far as I can tell, this is a problem for any device with multiple cells on
different bits of the same address. Avoid the issue by changing the file name
to include the first bit number.
Fixes: 0331c611949f ("nvmem: core: Expose cells through sysfs")
Link: https://github.com/AsahiLinux/linux/blob/bd0a1a7d4/arch/arm64/boot/dts/apple/t600x-dieX.dtsi#L156
Cc: <[email protected]>
Cc: Miquel Raynal <[email protected]>
Cc: Rafał Miłecki <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Srinivas Kandagatla <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: <[email protected]>
Cc: Sven Peter <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
Reviewed-by: Eric Curtin <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The Documentation/ABI/testing/sysfs-class-net-statistics documentation
is pointing to the wrong path for the interface. Documentation is
pointing to /sys/class/<iface>, instead of /sys/class/net/<iface>.
Fix it by adding the `net/` directory before the interface.
Fixes: 6044f9700645 ("net: sysfs: document /sys/class/net/statistics/*")
Signed-off-by: Breno Leitao <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add the nodes for CMB subunit MSR(mux select register) support.
CMB MSRs(mux select registers) is to separate mux, arbitration,
interleaving,data packing control from stream filtering control.
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Tao Zhang <[email protected]>
Signed-off-by: Mao Jinlong <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
CMB_TIER register is CMB subunit timestamp insertion enable register.
Bit 0 is PATT_TSENAB bit. Set this bit to 1 to request a timestamp
following a CMB interface pattern match. Bit 1 is XTRIG_TSENAB bit.
Set this bit to 1 to request a timestamp following a CMB CTI timestamp
request. Bit 2 is TS_ALL bit. Set this bit to 1 to request timestamp
for all packets.
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Tao Zhang <[email protected]>
Signed-off-by: Jinlong Mao <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Timestamps are requested if the monitor’s CMB data set unit input
data matches the value in the Monitor CMB timestamp pattern and mask
registers (M_CMB_TPR and M_CMB_TPMR) when CMB timestamp enabled
via the timestamp insertion enable register bit(CMB_TIER.PATT_TSENAB).
The pattern match trigger output is achieved via setting values into
the CMB trigger pattern and mask registers (CMB_XPR and CMB_XPMR).
After configuring a pattern through these registers, the TPDM subunit
will assert an output trigger every time it receives new input data
that matches the configured pattern value. Values in a given bit
number of the mask register correspond to the same bit number in
the corresponding pattern register.
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Tao Zhang <[email protected]>
Signed-off-by: Jinlong Mao <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
TPDM CMB subunits support two forms of CMB data set element creation:
continuous and trace-on-change collection mode. Continuous change
creates CMB data set elements on every CMBCLK edge. Trace-on-change
creates CMB data set elements only when a new data set element differs
in value from the previous element in a CMB data set. Set CMB_CR.MODE
to 0 for continuous CMB collection mode. Set CMB_CR.MODE to 1 for
trace-on-change CMB collection mode.
Reviewed-by: James Clark <[email protected]>
Signed-off-by: Tao Zhang <[email protected]>
Signed-off-by: Jinlong Mao <[email protected]>
Signed-off-by: Suzuki K Poulose <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Linux 6.8-rc4
Pulling this for a bugfix upstream with which the gpio/for-next branch
conflicts.
|
|
Sometimes a voltage channel might have an hard failure (eg: a shorted
MOSFET). Hence, add a fault attribute to report such failures.
Signed-off-by: Nuno Sa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
Add functionality to read version of loaded FW from sysfs.
Signed-off-by: Cezary Rojewski <[email protected]>
Signed-off-by: Amadeusz Sławiński <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Expose the `auto_reset` sysfs attribute to configure the driver to reset
the device when a fatal error is detected.
When auto reset is enabled, the driver resets the device when it detects
either an heartbeat failure or a fatal error through an interrupt.
This patch is based on earlier work done by Shashank Gupta.
Signed-off-by: Damian Muszynski <[email protected]>
Reviewed-by: Ahsan Atta <[email protected]>
Reviewed-by: Markas Rapoportas <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Signed-off-by: Mun Chun Yep <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
Add a mechanism that allows to inject a heartbeat error for testing
purposes.
A new attribute `inject_error` is added to debugfs for each QAT device.
Upon a write on this attribute, the driver will inject an error on the
device which can then be detected by the heartbeat feature.
Errors are breaking the device functionality thus they require a
device reset in order to be recovered.
This functionality is not compiled by default, to enable it
CRYPTO_DEV_QAT_ERROR_INJECTION must be set.
Signed-off-by: Damian Muszynski <[email protected]>
Reviewed-by: Giovanni Cabiddu <[email protected]>
Reviewed-by: Lucas Segarra Fernandez <[email protected]>
Reviewed-by: Ahsan Atta <[email protected]>
Reviewed-by: Markas Rapoportas <[email protected]>
Signed-off-by: Mun Chun Yep <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|