aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-08-27wifi: iwlwifi: mvm: add firmware debug points for EMLSR entry / exitEmmanuel Grumbach2-0/+10
This will help to dump the firmware logs at the right spot if needed. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.3a91e89e32f8.Ieb28d7756c47dee52c912a71abe82fa0b08b19da@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwiif: mvm: handle the new BT notifEmmanuel Grumbach1-1/+35
Iterate all the links and check if any action must be taken. The new notification impacts only the esr decision. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.00cfc07879c6.I8491483fda3b5888ea6ffa10fbd17807e443f943@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: mvm: start to support the new BT profile notificationEmmanuel Grumbach5-9/+80
We have a new notification the BT profile. It contains almost nothing, only the wifi loss information. Copy this into mvm. We still need to iterate over the vifs / links to use this data. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.637499f3a85a.I8bf654cf5d8aa038100273876c936845ecc338f7@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: mvm: s/iwl_bt_coex_profile_notif/iwl_bt_coex_prof_old_notifEmmanuel Grumbach5-13/+13
The iwl_bt_coex_profile_notif is now being obsoleted. It'll be replaced by a new notification coming with a non-legacy group. Rename it to avoid confusion. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.dc29fd0d7817.I5881fce86ec8b76ae98d2948265434b8e7d860c1@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: mvm: increase the time between ranging measurementsAvraham Stern1-1/+1
The algo running in fw may take a little longer than 5 milliseconds, (e.g. measurement on 80MHz while associated). Increase the minimum time between measurements to 7 milliseconds. Fixes: 830aa3e7d1ca ("iwlwifi: mvm: add support for range request command version 13") Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.d3f3c26e00d9.I09e951290e8a3d73f147b88166fd9a678d1d69ed@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: mvm: set the cipher for secured NDP rangingAvraham Stern1-0/+1
The cipher pointer is not set, but is derefereced trying to set its content, which leads to a NULL pointer dereference. Fix it by pointing to the cipher parameter before dereferencing. Fixes: 626be4bf99f6 ("wifi: iwlwifi: mvm: modify iwl_mvm_ftm_set_secured_ranging() parameters") Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.24e83369f136.I80501ddcb82920561f450d00020d860e7a3f90c6@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: mvm: Fix a race in scan abort flowIlan Peer2-8/+47
When the upper layer requests to cancel an ongoing scan, a race is possible in which by the time the driver starts to handle the upper layers scan cancel flow, the FW already completed handling the scan request and the driver received the scan complete notification but still did not handle the notification. In such a case the FW will simply ignore the scan abort request coming from the driver, no notification would arrive from the FW and the entire abort flow would be considered a failure. To better handle this, check the status code returned by the FW for the scan abort command. In case the status indicates that no scan was aborted, complete the scan abort flow with success, i.e., the scan was aborted, as the flow is expected to consume the scan complete notification. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240825085558.483989d3baef.I3340556a222388504c6330b333360bf77d10f9e2@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: mvm: set ul_mu_data_disable when neededEmmanuel Grumbach2-3/+16
The firmware needs to know what we had in the HE CAP, propagate that setting to the firmware through the LINK command. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.fef270d2995b.I328237837df30e1cb98764987eaaf8e8993e058c@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: mei: add support for SAP version 4Avraham Stern2-15/+53
SAP version 4 uses larger Host to MEI notification queue. Since it is unknown which SAP version is used by the CSME firmware when the driver loads, try version 4 first. In case the CSME firmware uses version 3, the memory allocation will fail. In this case the driver will try again to allocate the memory for version 3. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.8372e040282f.Ia0085784e08a35159c9293f986c3d2774038f4c4@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: config: label 'gl' devices as discreteJohannes Berg3-3/+13
The 'gl' devices are in the bz family, but they're not, integrated, so should have their own trans config struct. Fix that, also necessitating the removal of LTR config, and while at it remove 0x2727 and 0x272D IDs that were only used for test chips. Fixes: c30a2a64788b ("wifi: iwlwifi: add a new PCI device ID for BZ device")ticket=none Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.95aed0620080.Ib9129512c95aa57acc9876bdff8b99dd41e1562c@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: pcie: print function scratch before writingJohannes Berg1-0/+2
We may want to know the value of this register for certain debug scenarios before we overwrite it, it indicates which parts of the chip have recently been reset. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.737e5f8bb8df.Ia3f3637ac4a0fb4b35ffd652f92eb75de652ee12@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: mvm: use correct key iterationJohannes Berg1-6/+6
In the cases changed here, key iteration isn't done from an RCU critical section, but rather using the wiphy lock as protection. Therefore, just use ieee80211_iter_keys(). The link switch case can therefore also use sync commands. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.69a2d18580c1.I2148e04d4b467d0b100beac8f7e449bfaaf775a5@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: remove MVM prefix from FW macrosMiri Korenblit7-10/+10
These are not mvm specific. Signed-off-by: Miri Korenblit <[email protected]> Reviewed-by: Emmanuel Grumbach <[email protected]> Link: https://patch.msgid.link/20240729201718.939b32f84f46.I293957bf172680871eba24448d9d1870e49100b6@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: mvm: add support for new REDUCE_TXPOWER_CMD versionsEmmanuel Grumbach3-15/+100
New API versions are coming up for this command. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.7ec1527be98c.I52dede6532bc61041c441caee5273734f14a1d78@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: mvm: prepare the introduction of V9 of REDUCED_TX_POWEREmmanuel Grumbach3-13/+26
* Rename iwl_dev_tx_power_cmd to iwl_dev_tx_power_cmd_v3_v8 * struct iwl_dev_tx_power_common needs to be packed. It was always the case, but now that its size is not a multiple of 4, it becomes meaningful. * Move per_band data out of the common structure since it won't be present in the new versions of the command. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240729201718.8da29a66984f.I922bdef4740d990f98cb452e858c4157bbc491c5@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: mac80211: don't use rate mask for offchannel TX eitherPing-Ke Shih5-6/+8
Like the commit ab9177d83c04 ("wifi: mac80211: don't use rate mask for scanning"), ignore incorrect settings to avoid no supported rate warning reported by syzbot. The syzbot did bisect and found cause is commit 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band"), which however corrects bitmask of HE MCS and recognizes correctly settings of empty legacy rate plus HE MCS rate instead of returning -EINVAL. As suggestions [1], follow the change of SCAN TX to consider this case of offchannel TX as well. [1] https://lore.kernel.org/linux-wireless/[email protected]/T/#m2ac2a6d2be06a37c9c47a3d8a44b4f647ed4f024 Reported-by: [email protected] Closes: https://lore.kernel.org/linux-wireless/[email protected]/ Fixes: 9df66d5b9f45 ("cfg80211: fix default HE tx bitrate mask in 2G band") Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: mac80211: refactor block ack management codeDmitry Antipov5-43/+27
Introduce 'ieee80211_mgmt_ba()' to avoid code duplication between 'ieee80211_send_addba_resp()', 'ieee80211_send_addba_request()', and 'ieee80211_send_delba()', ensure that all related addresses are '__aligned(2)', and prefer convenient 'ether_addr_copy()' over generic 'memcpy()'. No functional changes expected. Signed-off-by: Dmitry Antipov <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: mac80211_hwsim: correct MODULE_PARM_DESC of multi_radioZong-Zhe Yang1-1/+1
Correct the name field in multi_radio's MODULE_PARM_DESC. Fixes: d2601e34a102 ("wifi: mac80211_hwsim: add support for multi-radio wiphy") Signed-off-by: Zong-Zhe Yang <[email protected]> Acked-by: Felix Fietkau <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: iwlwifi: clear trans->state earlier upon errorEmmanuel Grumbach2-2/+2
When the firmware crashes, we first told the op_mode and only then, changed the transport's state. This is a problem if the op_mode's nic_error() handler needs to send a host command: it'll see that the transport's state still reflects that the firmware is alive. Today, this has no consequences since we set the STATUS_FW_ERROR bit and that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording looks at this bit to know not to send a host command for example. To fix the hibernation, we needed to reset the firmware without having an error and checking STATUS_FW_ERROR to see whether the firmware is alive will no longer hold, so this change is necessary as well. Change the flow a bit. Change trans->state before calling the op_mode's nic_error() method and check trans->state instead of STATUS_FW_ERROR. This will keep the current behavior of iwl_fw_dbg_stop_restart_recording upon firmware error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not alive. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid [I missed this was a dependency for the hibernation fix, changed the commit message a bit accordingly] Signed-off-by: Johannes Berg <[email protected]>
2024-08-27wifi: wfx: repair open network AP modeAlexander Sverdlin1-1/+4
RSN IE missing in beacon is normal in open networks. Avoid returning -EINVAL in this case. Steps to reproduce: $ cat /etc/wpa_supplicant.conf network={ ssid="testNet" mode=2 key_mgmt=NONE } $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf nl80211: Beacon set failed: -22 (Invalid argument) Failed to set beacon parameters Interface initialization failed wlan0: interface state UNINITIALIZED->DISABLED wlan0: AP-DISABLED wlan0: Unable to setup interface. Failed to initialize AP interface After the change: $ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf Successfully initialized wpa_supplicant wlan0: interface state UNINITIALIZED->ENABLED wlan0: AP-ENABLED Cc: [email protected] Fixes: fe0a7776d4d1 ("wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()") Signed-off-by: Alexander Sverdlin <[email protected]> Reviewed-by: Jérôme Pouiller <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-27libceph: use min() to simplify code in ceph_dns_resolve_name()Li Zetao1-1/+1
When resolving name in ceph_dns_resolve_name(), the end address of name is determined by the minimum value of delim_p and colon_p. So using min() here is more in line with the context. Signed-off-by: Li Zetao <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2024-08-27ceph: Convert to use jiffies macroChen Yufan1-1/+2
Use time_after_eq macro instead of using jiffies directly to handle wraparound. [ xiubli: adjust the header files order ] Signed-off-by: Chen Yufan <[email protected]> Reviewed-by: Xiubo Li <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2024-08-27ceph: Remove unused declarationsYue Haibing3-7/+0
These functions is never implemented and used. Signed-off-by: Yue Haibing <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2024-08-27Documentation/srso: Document a method for checking safe RET operates properlyBorislav Petkov (AMD)3-1/+140
Add a method to quickly verify whether safe RET operates properly on a given system using perf tool. Also, add a selftest which does the same thing. Signed-off-by: Borislav Petkov (AMD) <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-08-27powerpc/xmon: Fix tmpstr length check in scanhexMadhavan Srinivasan1-1/+1
If a function name is greater than 63 characters long, xmon command may not find them. For example, here is a test that executed an illegal instruction in a kernel function and one of call stack function has a name greater than 63 characters long: cpu 0x0: Vector: 700 (Program Check) at [c00000000a6577e0] pc: c0000000001aacb8: check__allowed__function__name__for__symbol__r4+0x8/0x10 lr: c00000000019c1e0: check__allowed__function__name__for__symbol__r1+0x20/0x40 sp: c00000000a657a80 msr: 800000000288b033 current = 0xc00000000a439900 paca = 0xc000000003e90000 irqmask: 0x03 irq_happened: 0x01 ..... [link register ] c00000000019c1e0 check__allowed__function__name__for__symbol__r1+0x20/0x40 [c00000000a657a80] c00000000a439900 (unreliable) [c00000000a657aa0] c0000000001021d8 check__allowed__function__name__for__symbol__r2_resolution_symbol+0x38/0x4c [c00000000a657ac0] c00000000019b424 power_pmu_event_init+0xa4/0xa50 and when executing a dump instruction (di) command for long function name, xmon fails to find the function symbol: 0:mon> di $check__allowed__function__name__for__symbol__r2_resolution_symbol unknown symbol 'check__allowed__function__name__for__symbol__r2_resolution_symb' 0000000000000000 ******** This is because in scanhex(), tmpstr loop index is checked only for a upper bound of 63. Fix it by replacing the upper bound value with (KSYM_NAME_LEN-1). With fix: 0:mon> di $check__allowed__function__name__for__symbol__r2_resolution_symbol c0000000001021a0 3c4c0249 addis r2,r12,585 c0000000001021a4 3842ae60 addi r2,r2,-20896 c0000000001021a8 7c0802a6 mflr r0 c0000000001021ac 60000000 nop ..... Reported-by: Miguel Ojeda <[email protected]> Closes: https://lore.kernel.org/linuxppc-dev/CANiq72=QeTgtZL4k9=4CJP6C_Hv=rh3fsn3B9S3KFoPXkyWk3w@mail.gmail.com/ Signed-off-by: Madhavan Srinivasan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://msgid.link/[email protected]
2024-08-27KVM: arm64: Expose ID_AA64PFR2_EL1 to userspace and guestsMarc Zyngier1-1/+5
Everything is now in place for a guest to "enjoy" FP8 support. Expose ID_AA64PFR2_EL1 to both userspace and guests, with the explicit restriction of only being able to clear FPMR. All other features (MTE* at the time of writing) are hidden and not writable. Reviewed-by: Mark Brown <[email protected]> Tested-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]>
2024-08-27KVM: arm64: Enable FP8 support when available and configuredMarc Zyngier1-0/+3
If userspace has enabled FP8 support (by setting ID_AA64PFR2_EL1.FPMR to 1), let's enable the feature by setting HCRX_EL2.EnFPM for the vcpu. Reviewed-by: Mark Brown <[email protected]> Tested-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]>
2024-08-27KVM: arm64: Expose ID_AA64FPFR0_EL1 as a writable ID regMarc Zyngier1-1/+1
ID_AA64FPFR0_EL1 contains all sort of bits that contain a description of which FP8 subfeatures are implemented. We don't really care about them, so let's just expose that register and allow userspace to disable subfeatures at will. Reviewed-by: Mark Brown <[email protected]> Tested-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]>
2024-08-27KVM: arm64: Honor trap routing for FPMRMarc Zyngier1-0/+8
HCRX_EL2.EnFPM controls the trapping of FPMR (as well as the validity of any FP8 instruction, but we don't really care about this last part). Describe the trap bit so that the exception can be reinjected in a NV guest. Reviewed-by: Mark Brown <[email protected]> Tested-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]>
2024-08-27KVM: arm64: Add save/restore support for FPMRMarc Zyngier6-0/+35
Just like the rest of the FP/SIMD state, FPMR needs to be context switched. The only interesting thing here is that we need to treat the pKVM part a bit differently, as the host FP state is never written back to the vcpu thread, but instead stored locally and eagerly restored. Reviewed-by: Mark Brown <[email protected]> Tested-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]>
2024-08-27KVM: arm64: Move FPMR into the sysreg arrayMarc Zyngier3-2/+12
Just like SVCR, FPMR is currently stored at the wrong location. Let's move it where it belongs. Reviewed-by: Mark Brown <[email protected]> Tested-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]>
2024-08-27KVM: arm64: Add predicate for FPMR support in a VMMarc Zyngier1-0/+4
As we are about to check for the advertisement of FPMR support to a guest in a number of places, add a predicate that will gate most of the support code for FPMR. Reviewed-by: Mark Brown <[email protected]> Tested-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]>
2024-08-27KVM: arm64: Move SVCR into the sysreg arrayMarc Zyngier3-3/+14
SVCR is just a system register, and has no purpose being outside of the sysreg array. If anything, it only makes it more difficult to eventually support SME one day. If ever. Move it into the array with its little friends, and associate it with a visibility predicate. Although this is dead code, it at least paves the way for the next set of FP-related extensions. Reviewed-by: Mark Brown <[email protected]> Tested-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Zyngier <[email protected]>
2024-08-27USB: serial: option: add MeiG Smart SRM825LZHANG Yuntian1-0/+5
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=6f345e48 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: ZHANG Yuntian <[email protected]> Link: https://lore.kernel.org/[email protected]/ Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2024-08-27ALSA: pcm: Drop PCM vmalloc buffer helpersTakashi Iwai2-101/+0
As the last-standing user of PCM vmalloc buffer helper API took its own buffer management, we can finally drop those API functions, which were leftover after reorganization of ALSA memalloc code. Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-27drm/bridge: dw-hdmi: Move vmalloc PCM buffer management into the driverTakashi Iwai1-4/+26
The dw-hdmi drm bridge driver is the only one who still uses the ALSA vmalloc helper API functions. A previous attempt to change the way of buffer management wasn't taken for this legacy stuff, as we had little chance for test and some risk of major breaking. Instead, this patch moves the vmalloc buffer stuff into the dw-hdmi driver code itself, so that we can drop them from ALSA core code afterwards. There should be no functional changes. Link: https://lore.kernel.org/[email protected] Signed-off-by: Takashi Iwai <[email protected]> Link: https://patch.msgid.link/[email protected]
2024-08-27Merge branch 'xfrm: speed up policy insertions'Steffen Klassert4-112/+175
Florian Westphal says: ==================== Policy insertions do not scale well, due to both a lienar list walk to find the insertion spot and another list walk to set the 'pos' value (a tie-breaker to detect which policy is older when there is ambiguity as to which one should be matched). First patch gets rid of the second list walk on insert. Rest of the patches get rid of the insertion walk. This list walk was only needed because when I moved the policy db implementation to rbtree I retained the old insertion method for the sake of XFRM_MIGRATE. Switching that to tree-based lookup avoids the need for the full list search. After this, insertion of a policy is largely independent of the number of pre-existing policies as long as they do not share the same source/ destination networks. Note that this is compile tested only as I did not find any tests for XFRM_MIGRATE. ==================== Signed-off-by: Steffen Klassert <[email protected]>
2024-08-27Merge tag 'vfs-6.11-rc6.fixes' of ↵Linus Torvalds10-83/+84
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: "VFS: - Ensure that backing files uses file->f_ops->splice_write() for splice netfs: - Revert the removal of PG_private_2 from netfs_release_folio() as cephfs still relies on this - When AS_RELEASE_ALWAYS is set on a mapping the folio needs to always be invalidated during truncation - Fix losing untruncated data in a folio by making letting netfs_release_folio() return false if the folio is dirty - Fix trimming of streaming-write folios in netfs_inval_folio() - Reset iterator before retrying a short read - Fix interaction of streaming writes with zero-point tracker afs: - During truncation afs currently calls truncate_setsize() which sets i_size, expands the pagecache and truncates it. The first two operations aren't needed because they will have already been done. So call truncate_pagecache() instead and skip the redundant parts overlayfs: - Fix checking of the number of allowed lower layers so 500 layers can actually be used instead of just 499 - Add missing '\n' to pr_err() output - Pass string to ovl_parse_layer() and thus allow it to be used for Opt_lowerdir as well pidfd: - Revert blocking the creation of pidfds for kthread as apparently userspace relies on this. Specifically, it breaks systemd during shutdown romfs: - Fix romfs_read_folio() to use the correct offset with folio_zero_tail()" * tag 'vfs-6.11-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: netfs: Fix interaction of streaming writes with zero-point tracker netfs: Fix missing iterator reset on retry of short read netfs: Fix trimming of streaming-write folios in netfs_inval_folio() netfs: Fix netfs_release_folio() to say no if folio dirty afs: Fix post-setattr file edit to do truncation correctly mm: Fix missing folio invalidation calls during truncation ovl: ovl_parse_param_lowerdir: Add missed '\n' for pr_err ovl: fix wrong lowerdir number check for parameter Opt_lowerdir ovl: pass string to ovl_parse_layer() backing-file: convert to using fops->splice_write Revert "pidfd: prevent creation of pidfds for kthreads" romfs: fix romfs_read_folio() netfs, ceph: Partially revert "netfs: Replace PG_fscache by setting folio->private and marking dirty"
2024-08-26drm/xe/lnl: Drop force_probe requirementLucas De Marchi1-1/+0
Lunar Lake has been usable for a while in a desktop setup. Bugs are sporadically showing up in CI, but being promptly fixed. Nothing very concerning. All the uapi changes related to fundamental platform usage have been finalized. Remove the force_probe requirement and enable the platform by default. Cc: Thomas Hellström <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Jani Nikula <[email protected]> Reviewed-by: Thomas Hellström <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Lucas De Marchi <[email protected]>
2024-08-26hwmon: (pt5161l) Fix invalid temperature readingCosmo Chou1-2/+2
The temperature reading function was using a signed long for the ADC code, which could lead to mishandling of invalid codes on 32-bit platforms. This allowed out-of-range ADC codes to be incorrectly interpreted as valid values and used in temperature calculations. Change adc_code to u32 to ensure that invalid ADC codes are correctly identified on all platforms. Fixes: 1b2ca93cd059 ("hwmon: Add driver for Astera Labs PT5161L retimer") Signed-off-by: Cosmo Chou <[email protected]> Message-ID: <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2024-08-26ext4: dax: fix overflowing extents beyond inode size when partially writingZhihao Cheng1-4/+4
The dax_iomap_rw() does two things in each iteration: map written blocks and copy user data to blocks. If the process is killed by user(See signal handling in dax_iomap_iter()), the copied data will be returned and added on inode size, which means that the length of written extents may exceed the inode size, then fsck will fail. An example is given as: dd if=/dev/urandom of=file bs=4M count=1 dax_iomap_rw iomap_iter // round 1 ext4_iomap_begin ext4_iomap_alloc // allocate 0~2M extents(written flag) dax_iomap_iter // copy 2M data iomap_iter // round 2 iomap_iter_advance iter->pos += iter->processed // iter->pos = 2M ext4_iomap_begin ext4_iomap_alloc // allocate 2~4M extents(written flag) dax_iomap_iter fatal_signal_pending done = iter->pos - iocb->ki_pos // done = 2M ext4_handle_inode_extension ext4_update_inode_size // inode size = 2M fsck reports: Inode 13, i_size is 2097152, should be 4194304. Fix? Fix the problem by truncating extents if the written length is smaller than expected. Fixes: 776722e85d3b ("ext4: DAX iomap write support") CC: [email protected] Link: https://bugzilla.kernel.org/show_bug.cgi?id=219136 Signed-off-by: Zhihao Cheng <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Zhihao Cheng <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2024-08-26ext4: don't set SB_RDONLY after filesystem errorsJan Kara1-4/+5
When the filesystem is mounted with errors=remount-ro, we were setting SB_RDONLY flag to stop all filesystem modifications. We knew this misses proper locking (sb->s_umount) and does not go through proper filesystem remount procedure but it has been the way this worked since early ext2 days and it was good enough for catastrophic situation damage mitigation. Recently, syzbot has found a way (see link) to trigger warnings in filesystem freezing because the code got confused by SB_RDONLY changing under its hands. Since these days we set EXT4_FLAGS_SHUTDOWN on the superblock which is enough to stop all filesystem modifications, modifying SB_RDONLY shouldn't be needed. So stop doing that. Link: https://lore.kernel.org/all/[email protected] Reported-by: Christian Brauner <[email protected]> Signed-off-by: Jan Kara <[email protected]> Reviewed-by: Christian Brauner <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2024-08-26ext4: nested locking for xattr inodeWojciech Gładysz1-2/+2
Add nested locking with I_MUTEX_XATTR subclass to avoid lockdep warning while handling xattr inode on file open syscall at ext4_xattr_inode_iget. Backtrace EXT4-fs (loop0): Ignoring removed oldalloc option ====================================================== WARNING: possible circular locking dependency detected 5.10.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor543/2794 is trying to acquire lock: ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 but task is already holding lock: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ei->i_data_sem/3){++++}-{3:3}: lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 ext4_update_i_disksize fs/ext4/ext4.h:3267 [inline] ext4_xattr_inode_write fs/ext4/xattr.c:1390 [inline] ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1538 [inline] ext4_xattr_set_entry+0x331a/0x3d80 fs/ext4/xattr.c:1662 ext4_xattr_ibody_set+0x124/0x390 fs/ext4/xattr.c:2228 ext4_xattr_set_handle+0xc27/0x14e0 fs/ext4/xattr.c:2385 ext4_xattr_set+0x219/0x390 fs/ext4/xattr.c:2498 ext4_xattr_user_set+0xc9/0xf0 fs/ext4/xattr_user.c:40 __vfs_setxattr+0x404/0x450 fs/xattr.c:177 __vfs_setxattr_noperm+0x11d/0x4f0 fs/xattr.c:208 __vfs_setxattr_locked+0x1f9/0x210 fs/xattr.c:266 vfs_setxattr+0x112/0x2c0 fs/xattr.c:283 setxattr+0x1db/0x3e0 fs/xattr.c:548 path_setxattr+0x15a/0x240 fs/xattr.c:567 __do_sys_setxattr fs/xattr.c:582 [inline] __se_sys_setxattr fs/xattr.c:578 [inline] __x64_sys_setxattr+0xc5/0xe0 fs/xattr.c:578 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #0 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); *** DEADLOCK *** 5 locks held by syz-executor543/2794: #0: ffff888026fbc448 (sb_writers#4){.+.+}-{0:0}, at: mnt_want_write+0x4a/0x2a0 fs/namespace.c:365 #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: do_truncate+0x1cf/0x2c0 fs/open.c:62 #2: ffff8880215e3310 (&ei->i_mmap_sem){++++}-{3:3}, at: ext4_setattr+0xec4/0x19c0 fs/ext4/inode.c:5519 #3: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_write_trylock_xattr fs/ext4/xattr.h:162 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_try_to_expand_extra_isize fs/ext4/inode.c:5938 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: __ext4_mark_inode_dirty+0x4fb/0x810 fs/ext4/inode.c:6018 stack backtrace: CPU: 1 PID: 2794 Comm: syz-executor543 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x177/0x211 lib/dump_stack.c:118 print_circular_bug+0x146/0x1b0 kernel/locking/lockdep.c:2002 check_noncircular+0x2cc/0x390 kernel/locking/lockdep.c:2123 check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7f0cde4ea229 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd81d1c978 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 0030656c69662f30 RCX: 00007f0cde4ea229 RDX: 0000000000000089 RSI: 00000000000a0a00 RDI: 00000000200001c0 RBP: 2f30656c69662f2e R08: 0000000000208000 R09: 0000000000208000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd81d1c9c0 R13: 00007ffd81d1ca00 R14: 0000000000080000 R15: 0000000000000003 EXT4-fs error (device loop0): ext4_expand_extra_isize_ea:2730: inode #13: comm syz-executor543: corrupted in-inode xattr Signed-off-by: Wojciech Gładysz <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2024-08-26jbd2: remove unneeded check of ret in jbd2_fc_get_bufKemeng Shi1-11/+5
Simply return -EINVAL if j_fc_off is invalid to avoid repeated check of ret. Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Zhang Yi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2024-08-26jbd2: correct comment jbd2_mark_journal_emptyKemeng Shi1-1/+1
After jbd2_mark_journal_empty, journal log is supposed to be empty. Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Zhang Yi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2024-08-26jbd2: move escape handle to futher improve jbd2_journal_write_metadata_bufferKemeng Shi1-25/+24
Move escape handle to futher improve code readability and remove some repeat check. Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Zhang Yi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2024-08-26jbd2: remove unneeded done_copy_out variable in ↵Kemeng Shi1-13/+8
jbd2_journal_write_metadata_buffer It's more intuitive to use jh_in->b_frozen_data directly instead of done_copy_out variable. Simply remove unneeded done_copy_out variable and use b_frozen_data instead. Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: Zhang Yi <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2024-08-26jbd2: remove unneeded kmap for jh_in->b_frozen_data in ↵Kemeng Shi1-2/+4
jbd2_journal_write_metadata_buffer Remove kmap for page of b_frozen_data from jbd2_alloc() which always provides an address from the direct kernel mapping. Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Zhang Yi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2024-08-26jbd2: remove unused return value of jbd2_fc_release_bufsKemeng Shi2-4/+2
Remove unused return value of jbd2_fc_release_bufs. Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Zhang Yi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2024-08-26jbd2: remove dead check in journal_alloc_journal_headKemeng Shi1-2/+1
We will alloc journal_head with __GFP_NOFAIL anyway, test for failure is pointless. Signed-off-by: Kemeng Shi <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Zhang Yi <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.