| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Why:
To supported Low Refresh Rate panel for Replay Feature,
Adding some parameters to record Low Refresh Rate information.
Reviewed-by: Robin Chen <[email protected]>
Signed-off-by: Dennis Chan <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Addressed previous issues with quality changes and new issues due to
rolling back quality changes.
[How]
This reverts commit f9e6759888866748f31b6b6c2142a481d587f51f, fixes merge conflicts, and fixed some
formatting errors.
Store current sharpness level for each pregen table to minimize
calculating sharpness table every time.
Disable dynamic ODM when sharpness is enabled.
Reviewed-by: Jun Lei <[email protected]>
Signed-off-by: Samson Tam <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
We want to avoid arming the HPD timer in firmware when preparing for
S0i3 entry when DC is considered in D3.
[How]
Notify DMCUB of the power state transitions so it can decide to arm
the HPD timer for idle in DCN35 only in D0.
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Signed-off-by: Ovidiu Bunea <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Synaptics Cascaded Panamera topology needs to unconditionally
acquire root aux for dsc decoding.
Reviewed-by: Roman Li <[email protected]>
Signed-off-by: Fangzhi Zuo <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Because sometime DMUB GPINT will time out,
it will cause we return 0 as residency number.
[How]
Retry to avoid this happened.
Reviewed-by: Robin Chen <[email protected]>
Signed-off-by: ChunTao Tso <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Request from PMFW to use GART for clock table transfer tables as
framebuffer is being deprecated on APU.
[How]
Switch over to GART via the allocation flag.
Reviewed-by: Sung joon Kim <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
translate_by_source need not be set for DCN401 onwards since cursor
cursor composition comes after scaler in the hardware pipeline.
Hence offset calculation has been reworked, and this setting is not
necessary to be enabled anymore.
Reviewed-by: Rodrigo Siqueira <[email protected]>
Signed-off-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY]
Remove coverity issues that were originally ignored.
[HOW]
Ran coverity locally on driver, used output report to find existing
coverity issues, resolved them
Reviewed-by: Nicholas Choi <[email protected]>
Signed-off-by: Daniel Sa <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[WHY]
Prefetch calculations did not guarantee that bandwidth required in
mode support was less than mode programming which can cause failures.
[HOW]
Fix bandwidth calculations to assume fixed times for OTO schedule,
and choose which schedule to use based on time to fetch pixel data.
Reviewed-by: Jun Lei <[email protected]>
Signed-off-by: Dillon Varone <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Description]
Before every full update we must wait for all pending updates to be
cleared - this is particularly important for minimal transitions
because if we don't wait for pending cleared, it will be as if
there was no minimal transition at all. In OTG we must read 3 different
status registers for pending cleared, one specifically for OTG updates,
one specifically for OPTC updates, and the last for surface related
updates
Reviewed-by: Dillon Varone <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
post_divider_value should not be 0.
Reviewed-by: Charlene Liu <[email protected]>
Signed-off-by: Ahmed, Muhammad <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Description]
Skipping clock updates is not a hard requirement for overclocking
and only an optimization. Remove the skip as this can cause issues
for FAMS transitions during the overclock sequence. If FAMS
is enabled we must disable UCLK switch on any full update (which
requires update clocks to be called).
Reviewed-by: Dillon Varone <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Signed-off-by: Zaeem Mohamed <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Idle power states (IPS) describe levels of power-gating within DCN. DM
and DC is responsible for ensuring that we are out of IPS before any DCN
programming happens. Any DCN programming while we're in IPS leads to
undefined behavior (mostly hangs).
Because IPS intersects with all display features, the ability to disable
IPS by default while ironing out the known issues is desired. However,
disabing it completely will cause important features such as s0ix entry
to fail.
Therefore, more granular IPS debug flags are desired.
[How]
Extend the dc debug mask bits to include the available list of IPS
debug flags.
All the flags should work as documented, with the exception of
IPS_DISABLE_DYNAMIC. It requires dm changes which will be done in
later changes.
v2: enable docs and fix docstring format
Signed-off-by: Leo Li <[email protected]>
Reviewed-by: Aurabindo Pillai <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Print the index for the profiles.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3543
Reviewed-by: Kenneth Feng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
No change in functionality for the current code, but we
need to set the index properly before changing it if we
ever use a non-0 index.
Reviewed-by: Kenneth Feng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The kernel doc says you need to select manual mode to
adjust this, but the code only allows you to adjust it when
manual mode is not selected. Remove the manual mode check.
Reviewed-by: Kenneth Feng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Matthieu Baerts says:
====================
mptcp: close subflow when receiving TCP+FIN and misc.
Here are different fixes:
Patch 1 closes the subflow after having received a FIN, instead
of leaving it half-closed until the end of the MPTCP connection.
A fix for v5.12.
Patch 2 validates the previous patch.
Patch 3 is a fix for a recent fix to check both directions for the
backup flag. It can follow the 'Fixes' commit and be backported up
to v5.7.
Patch 4 adds a missing \n at the end of pr_debug(), causing debug
messages to be displayed with a delay, which confuses the debugger.
A fix for v5.6.
====================
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-0-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
pr_debug() have been added in various places in MPTCP code to help
developers to debug some situations. With the dynamic debug feature, it
is easy to enable all or some of them, and asks users to reproduce
issues with extra debug.
Many of these pr_debug() don't end with a new line, while no 'pr_cont()'
are used in MPTCP code. So the goal was not to display multiple debug
messages on one line: they were then not missing the '\n' on purpose.
Not having the new line at the end causes these messages to be printed
with a delay, when something else needs to be printed. This issue is not
visible when many messages need to be printed, but it is annoying and
confusing when only specific messages are expected, e.g.
# echo "func mptcp_pm_add_addr_echoed +fmp" \
> /sys/kernel/debug/dynamic_debug/control
# ./mptcp_join.sh "signal address"; \
echo "$(awk '{print $1}' /proc/uptime) - end"; \
sleep 5s; \
echo "$(awk '{print $1}' /proc/uptime) - restart"; \
./mptcp_join.sh "signal address"
013 signal address
(...)
10.75 - end
15.76 - restart
013 signal address
[ 10.367935] mptcp:mptcp_pm_add_addr_echoed: MPTCP: msk=(...)
(...)
=> a delay of 5 seconds: printed with a 10.36 ts, but after 'restart'
which was printed at the 15.76 ts.
The 'Fixes' tag here below points to the first pr_debug() used without
'\n' in net/mptcp. This patch could be split in many small ones, with
different Fixes tag, but it doesn't seem worth it, because it is easy to
re-generate this patch with this simple 'sed' command:
git grep -l pr_debug -- net/mptcp |
xargs sed -i "s/\(pr_debug(\".*[^n]\)\(\"[,)]\)/\1\\\n\2/g"
So in case of conflicts, simply drop the modifications, and launch this
command.
Fixes: f870fa0b5768 ("mptcp: Add MPTCP socket stubs")
Cc: [email protected]
Reviewed-by: Geliang Tang <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-4-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The 'mptcp_subflow_context' structure has two items related to the
backup flags:
- 'backup': the subflow has been marked as backup by the other peer
- 'request_bkup': the backup flag has been set by the host
Looking only at the 'backup' flag can make sense in some cases, but it
is not the behaviour of the default packet scheduler when selecting
paths.
As explained in the commit b6a66e521a20 ("mptcp: sched: check both
directions for backup"), the packet scheduler should look at both flags,
because that was the behaviour from the beginning: the 'backup' flag was
set by accident instead of the 'request_bkup' one. Now that the latter
has been fixed, get_retrans() needs to be adapted as well.
Fixes: b6a66e521a20 ("mptcp: sched: check both directions for backup")
Cc: [email protected]
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-3-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Thanks to the previous commit, the MPTCP subflows are now closed on both
directions even when only the MPTCP path-manager of one peer asks for
their closure.
In the two tests modified here -- "userspace pm add & remove address"
and "userspace pm create destroy subflow" -- one peer is controlled by
the userspace PM, and the other one by the in-kernel PM. When the
userspace PM sends a RM_ADDR notification, the in-kernel PM will
automatically react by closing all subflows using this address. Now,
thanks to the previous commit, the subflows are properly closed on both
directions, the userspace PM can then no longer closes the same
subflows if they are already closed. Before, it was OK to do that,
because the subflows were still half-opened, still OK to send a RM_ADDR.
In other words, thanks to the previous commit closing the subflows, an
error will be returned to the userspace if it tries to close a subflow
that has already been closed. So no need to run this command, which mean
that the linked counters will then not be incremented.
These tests are then no longer sending both a RM_ADDR, then closing the
linked subflow just after. The test with the userspace PM on the server
side is now removing one subflow linked to one address, then sending
a RM_ADDR for another address. The test with the userspace PM on the
client side is now only removing the subflow that was previously
created.
Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer")
Cc: [email protected]
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-2-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When a peer decides to close one subflow in the middle of a connection
having multiple subflows, the receiver of the first FIN should accept
that, and close the subflow on its side as well. If not, the subflow
will stay half closed, and would even continue to be used until the end
of the MPTCP connection or a reset from the network.
The issue has not been seen before, probably because the in-kernel
path-manager always sends a RM_ADDR before closing the subflow. Upon the
reception of this RM_ADDR, the other peer will initiate the closure on
its side as well. On the other hand, if the RM_ADDR is lost, or if the
path-manager of the other peer only closes the subflow without sending a
RM_ADDR, the subflow would switch to TCP_CLOSE_WAIT, but that's it,
leaving the subflow half-closed.
So now, when the subflow switches to the TCP_CLOSE_WAIT state, and if
the MPTCP connection has not been closed before with a DATA_FIN, the
kernel owning the subflow schedules its worker to initiate the closure
on its side as well.
This issue can be easily reproduced with packetdrill, as visible in [1],
by creating an additional subflow, injecting a FIN+ACK before sending
the DATA_FIN, and expecting a FIN+ACK in return.
Fixes: 40947e13997a ("mptcp: schedule worker when subflow is closed")
Cc: [email protected]
Link: https://github.com/multipath-tcp/packetdrill/pull/154 [1]
Reviewed-by: Mat Martineau <[email protected]>
Signed-off-by: Matthieu Baerts (NGI0) <[email protected]>
Link: https://patch.msgid.link/20240826-net-mptcp-close-extra-sf-fin-v1-1-905199fe1172@kernel.org
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We have some problem closing zero-window fin-wait-1 tcp sockets in our
environment. This patch come from the investigation.
Previously tcp_abort only sends out reset and calls tcp_done when the
socket is not SOCK_DEAD, aka orphan. For orphan socket, it will only
purging the write queue, but not close the socket and left it to the
timer.
While purging the write queue, tp->packets_out and sk->sk_write_queue
is cleared along the way. However tcp_retransmit_timer have early
return based on !tp->packets_out and tcp_probe_timer have early
return based on !sk->sk_write_queue.
This caused ICSK_TIME_RETRANS and ICSK_TIME_PROBE0 not being resched
and socket not being killed by the timers, converting a zero-windowed
orphan into a forever orphan.
This patch removes the SOCK_DEAD check in tcp_abort, making it send
reset to peer and close the socket accordingly. Preventing the
timer-less orphan from happening.
According to Lorenzo's email in the v1 thread, the check was there to
prevent force-closing the same socket twice. That situation is handled
by testing for TCP_CLOSE inside lock, and returning -ENOENT if it is
already closed.
The -ENOENT code comes from the associate patch Lorenzo made for
iproute2-ss; link attached below, which also conform to RFC 9293.
At the end of the patch, tcp_write_queue_purge(sk) is removed because it
was already called in tcp_done_with_error().
p.s. This is the same patch with v2. Resent due to mis-labeled "changes
requested" on patchwork.kernel.org.
Link: https://patchwork.ozlabs.org/project/netdev/patch/[email protected]/
Fixes: c1e64e298b8c ("net: diag: Support destroying TCP sockets.")
Signed-off-by: Xueming Feng <[email protected]>
Tested-by: Lorenzo Colitti <[email protected]>
Reviewed-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This commit introduces MDI-X configuration support in vsc73xx phys.
Vsc73xx supports only auto mode or forced MDI.
Vsc73xx have auto MDI-X disabled by default in forced speed mode.
This commit enables it.
Signed-off-by: Pawel Dembicki <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Liao Chen says:
====================
net: fix module autoloading
This patchset aims to enable autoloading of some net modules.
By registering MDT, the kernel is allowed to automatically bind
modules to devices that match the specified compatible strings.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <[email protected]>
Acked-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
PCI core API pci_dev_id() can be used to get the BDF number for a PCI
device. We don't need to compose it manually. Use pci_dev_id() to
simplify the code a little bit.
Signed-off-by: Yu Liao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When sockfd_lookup() fails, gtp_encap_enable_socket() returns a
NULL pointer, but its callers only check for error pointers thus miss
the NULL pointer case.
Fix it by returning an error pointer with the error code carried from
sockfd_lookup().
(I found this bug during code inspection.)
Fixes: 1e3a3abd8b28 ("gtp: make GTP sockets in gtp_newlink optional")
Cc: Andreas Schultz <[email protected]>
Cc: Harald Welte <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Pablo Neira Ayuso <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, of_get_ethdev_address() return is checked for any return error
code which means that trying to get the MAC from NVMEM cells that is backed
by MTD will fail if it was not probed before ag71xx.
So, lets check the return error code for EPROBE_DEFER and defer the ag71xx
probe in that case until the underlying NVMEM device is live.
Signed-off-by: Robert Marko <[email protected]>
Signed-off-by: Rosen Penev <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit da15c78b5664 ("liquidio CN23XX: VF register access") declared
cn23xx_dump_vf_initialized_regs() but never implemented it.
octeon_dump_soft_command() is never implemented and used since introduction in
commit 35878618c92d ("liquidio: Added delayed work for periodically updating
the link statistics.").
And finally, a few other declarations were never implenmented since introduction
in commit f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters").
Signed-off-by: Yue Haibing <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 4863dea3fab0 ("net: Adding support for Cavium ThunderX network
controller") declared nicvf_qset_reg_{write,read}() but never implemented.
Commit 4863dea3fab0 ("net: Adding support for Cavium ThunderX network
controller") declared bgx_add_dmac_addr() but no implementation.
After commit 5fc7cf179449 ("net: thunderx: Cleanup PHY probing code.")
octeon_mdiobus_force_mod_depencency() is not used any more.
Signed-off-by: Yue Haibing <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Dmitry Safonov via says:
====================
net/selftests: TCP-AO selftests updates
First 3 patches are more-or-less cleanups/preparations.
Patches 4/5 are fixes for netns file descriptors leaks/open.
Patch 6 was sent to me/contributed off-list by Mohammad, who wants 32-bit
kernels to run TCP-AO.
Patch 7 is a workaround/fix for slow VMs. Albeit, I can't reproduce
the issue, but I hope it will fix netdev flakes for connect-deny-*
tests.
And the biggest change is adding TCP-AO tracepoints to selftests.
I think it's a good addition by the following reasons:
- The related tracepoints are now tested;
- It allows tcp-ao selftests to raise expectations on the kernel
behavior - up from the syscalls exit statuses + net counters.
- Provides tracepoints usage samples.
As tracepoints are not a stable ABI, any kernel changes done to them
will be reflected to the selftests, which also will allow users
to see how to change their code. It's quite better than parsing dmesg
(what BGP was doing pre-tracepoints, ugh).
Somewhat arguably, the code parses trace_pipe, rather than uses
libtraceevent (which any sane user should do). The reason behind that is
the same as for rt-netlink macros instead of libmnl: I'm trying
to minimize the library dependencies of the selftests. And the
performance of formatting text in kernel and parsing it again in a test
is not critical.
Current output sample:
> ok 73 Trace events matched expectations: 13 tcp_hash_md5_required[2] tcp_hash_md5_unexpected[4] tcp_hash_ao_required[3] tcp_ao_key_not_found[4]
Previously, tracepoints selftests were part of kernel tcp tracepoints
submission [1], but since then the code was quite changed:
- Now generic tracing setup is in lib/ftrace.c, separate from
lib/ftrace-tcp.c which utilizes TCP trace points. This separation
allows future selftests to trace non-TCP events, i.e. to find out
an skb's drop reason, which was useful in the creation of TCP-CLOSE
stress-test (not in this patch set, but used in attempt to reproduce
the issue from [2]).
- Another change is that in the previous submission the trace events
where used only to detect unexpected TCP-AO/TCP-MD5 events. In this
version the selftests will fail if an expected trace event didn't
appear.
Let's see how reliable this is on the netdev bot - it obviously passes
on my testing, but potentially may require a temporary XFAIL patch
if it misbehaves on a slow VM.
[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/commit/?id=33700a0c9b56
v3: https://lore.kernel.org/[email protected]
v2: https://lore.kernel.org/[email protected]
v1: https://lore.kernel.org/[email protected]
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Setup trace points, add a new ftrace instance in order to not interfere
with the rest of the system, filtering by net namespace cookies.
Raise a new background thread that parses trace_pipe, matches them with
the list of expected events.
Wiring up trace events to selftests provides another insight if there is
anything unexpected happining in the tcp-ao code (i.e. key rotation when
it's not expected).
Note: in real programs libtraceevent should be used instead of this
manual labor of setting ftrace up and parsing. I'm not using it here
as I don't want to have an .so library dependency that one would have to
bring into VM or DUT (Device Under Test). Please, don't copy it over
into any real world programs, that aren't tests.
Signed-off-by: Dmitry Safonov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
On tests that are expecting failure the timeout value is
TEST_RETRANSMIT_SEC == 1 second. Which is big enough for most of devices
under tests. But on a particularly slow machine/VM, 1 second might be
not enough for another thread to be scheduled and attempt to connect().
It is not a problem for tests that expect connect() to succeed as
the timeout value for them (TEST_TIMEOUT_SEC) is intentionally bigger.
One obvious way to solve this would be to increase TEST_RETRANSMIT_SEC.
But as all tests would increase the timeouts, that's going to sum up.
But here is less obvious way that keeps timeouts for expected connect()
failures low: just synchronize the two threads, which will assure that
before counter checks the other thread got a chance to run and timeout
on connect(). The expected increase of the related counter for listen()
socket will yet test the expected failure.
Never happens on my machine, but I suppose the majority of netdev's
connect-deny-* flakes [1] are caused by this.
Prevents the following testing issue:
> # selftests: net/tcp_ao: connect-deny_ipv6
> # 1..21
> # # 462[lib/setup.c:243] rand seed 1720905426
> # TAP version 13
> # ok 1 Non-AO server + AO client
> # not ok 2 Non-AO server + AO client: TCPAOKeyNotFound counter did not increase: 0 <= 0
> # ok 3 AO server + Non-AO client
> # ok 4 AO server + Non-AO client: counter TCPAORequired increased 0 => 1
...
[1]: https://netdev-3.bots.linux.dev/vmksft-tcp-ao/results/681741/6-connect-deny-ipv6/stdout
Signed-off-by: Dmitry Safonov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It's not safe to use '%zu' specifier for printing uint64_t on 32-bit
systems. For uint64_t, we should use the 'PRIu64' macro from
the inttypes.h library. This ensures that the uint64_t is printed
correctly from the selftests regardless of the system architecture.
Signed-off-by: Mohammad Nassiri <[email protected]>
[Added missing spaces in fail/ok messages and uint64_t cast in
setsockopt-closed, as otherwise it was giving warnings on 64bit.
And carried it to netdev ml]
Signed-off-by: Dmitry Safonov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The switch_save_ns() helper suppose to help switching to another
namespace for some action and to return back to original namespace.
The fd should be closed.
Signed-off-by: Dmitry Safonov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
It turns to be that open_netns() is called rarely from the child-thread
and more often from parent-thread. Yet, on initialization of kconfig
checks, either of threads may reach kconfig_lock mutex first.
VRF-related checks do create a temporary ksft-check VRF in
an unshare()'d namespace and than setns() back to the original.
As original was opened from "/proc/self/ns/net", it's valid for
thread-leader (parent), but it's invalid for the child, resulting
in the following failure on tests that check has_vrfs() support:
> # ok 54 TCP-AO required on socket + TCP-MD5 key: prefailed as expected: Key was rejected by service
> # not ok 55 # error 381[unsigned-md5.c:24] Failed to add a VRF: -17
> # not ok 56 # error 383[unsigned-md5.c:33] Failed to add a route to VRF: -22: Key was rejected by service
> not ok 1 selftests: net/tcp_ao: unsigned-md5_ipv6 # exit=1
Use "/proc/thread-self/ns/net" which is valid for any thread.
Signed-off-by: Dmitry Safonov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Most of the functions in tcp-ao lib/ return negative errno or -1 in case
of a failure. That creates inconsistencies in lib/kconfig, which saves
what was the error code. As well as the uninitialized kconfig value is
-1, which also may be the result of a check.
Define KCONFIG_UNKNOWN and save negative return code, rather than
libc-style errno.
Signed-off-by: Dmitry Safonov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Instead of pre-allocating a fixed-sized buffer of TEST_MSG_BUFFER_SIZE
and printing into it, call vsnprintf() with str = NULL, which will
return the needed size of the buffer. This hack is documented in
man 3 vsnprintf.
Essentially, in C++ terms, it re-invents std::stringstream, which is
going to be used to print different tracing paths and formatted strings.
Use it straight away in __test_print() - which is thread-safe version of
printing in selftests.
Signed-off-by: Dmitry Safonov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Correct copy'n'paste typo: the previous line already initialises get_all
to 1.
Reported-by: Nassiri, Mohammad <[email protected]>
Closes: https://lore.kernel.org/all/DM6PR04MB4202BC58A9FD5BDD24A16E8EC56F2@DM6PR04MB4202.namprd04.prod.outlook.com/
Signed-off-by: Dmitry Safonov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Need to take some Xe bo definition in here before
we can add the BMG display 64k aligned size restrictions.
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Support for several Rust compiler versions started in commit 63b27f4a0074
("rust: start supporting several compiler versions"). Since we currently
need to use a number of unstable features in the kernel, it is a matter
of time until one gets stabilized and the `stable_features` lint warns.
For instance, the `new_uninit` feature may become stable soon, which
would give us multiple warnings like the following:
warning: the feature `new_uninit` has been stable since 1.82.0-dev
and no longer requires an attribute to enable
--> rust/kernel/lib.rs:17:12
|
17 | #![feature(new_uninit)]
| ^^^^^^^^^^
|
= note: `#[warn(stable_features)]` on by default
Thus allow the `stable_features` lint to avoid such warnings. This is
the simplest approach -- we do not have that many cases (and the goal
is to stop using unstable features anyway) and cleanups can be easily
done when we decide to update the minimum version.
An alternative would be to conditionally enable them based on the
compiler version (with the upcoming `RUSTC_VERSION` or maybe with the
unstable `cfg(version(...))`, but that one apparently will not work for
the nightly case). However, doing so is more complex and may not work
well for different nightlies of the same version, unless we do not care
about older nightlies.
Another alternative is using explicit tests of the feature calling
`rustc`, but that is also more complex and slower.
Reviewed-by: Alice Ryhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Remove indentation within the "Hacking" section of the Rust Quick Start
guide, i.e. remove a `<blockquote>` HTML element from the rendered
documentation.
Reported-by: Miguel Ojeda <[email protected]>
Closes: https://github.com/Rust-for-Linux/linux/issues/1103
Fixes: d07479b211b7 ("docs: add Rust documentation")
Signed-off-by: Jon Mulder <[email protected]>
Link: https://lore.kernel.org/r/20240826-pr-docs-rust-remove-quickstart-blockquote-v1-1-c51317d8d71a@gmail.com
[ Added Fixes tag, reworded slightly and matched title to a previous,
similar commit. - Miguel ]
Signed-off-by: Miguel Ojeda <[email protected]>
|
|
Recent commit fc7ec7f554d7 ("l2tp: delete sessions using work queue")
incorrectly uses drain_workqueue. The use of drain_workqueue in
l2tp_pre_exit_net is flawed because the workqueue is shared by all
nets and it is therefore possible for new work items to be queued
for other nets while drain_workqueue runs.
Instead of using drain_workqueue, use __flush_workqueue twice. The
first one will run all tunnel delete work items and any work already
queued. When tunnel delete work items are run, they may queue
new session delete work items, which the second __flush_workqueue will
run.
In l2tp_exit_net, warn if any of the net's idr lists are not empty.
Fixes: fc7ec7f554d7 ("l2tp: delete sessions using work queue")
Signed-off-by: James Chapman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Detlev Casanova says:
====================
Add GMAC support for rk3576
Add the necessary constants and functions to support the GMAC devices on
the rk3576.
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add constants and callback functions for the dwmac on RK3576 soc.
Signed-off-by: David Wu <[email protected]>
[rebase, extracted bindings]
Signed-off-by: Detlev Casanova <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add a rockchip,rk3576-gmac compatible for supporting the 2 gmac
devices on the rk3576.
Signed-off-by: Detlev Casanova <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Fix SELET -> SELECT in RK3588_GMAC_CLK_SELET_CRU and
RK3588_GMAC_CLK_SELET_IO
Signed-off-by: Detlev Casanova <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ARRAY_ELEM_PTR() is an access macro used to help the BPF verifier not
confused by offseted memory acceeses by yiedling a valid pointer or NULL in
a way that's clear to the verifier. As such, the canonical usage involves
checking NULL return from the macro. Note that in many cases, the NULL
condition can never happen - they're there just to hint the verifier.
In a bpf_loop in scx_central.bpf.c::central_dispatch(), the NULL check was
incorrect in that there was another dereference of the pointer in addition
to the NULL checked access. This worked as the pointer can never be NULL and
the verifier could tell it would never be NULL in this case.
However, this still looks wrong and trips smatch:
./tools/sched_ext/scx_central.bpf.c:205 ____central_dispatch()
error: we previously assumed 'gimme' could be null (see line 201)
./tools/sched_ext/scx_central.bpf.c
195
196 if (!scx_bpf_dispatch_nr_slots())
197 break;
198
199 /* central's gimme is never set */
200 gimme = ARRAY_ELEM_PTR(cpu_gimme_task, cpu, nr_cpu_ids);
201 if (gimme && !*gimme)
^^^^^
If gimme is NULL
202 continue;
203
204 if (dispatch_to_cpu(cpu))
--> 205 *gimme = false;
Fix the NULL check so that there are no derefs if NULL. This doesn't change
actual behavior.
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Link: http://lkml.kernel.org/r/<[email protected]>
|