aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-10-30mm: fix PSWPIN counter for large folios swap-inBarry Song1-2/+2
Similar to PSWPOUT, we should count the number of base pages instead of large folios. Link: https://lkml.kernel.org/r/[email protected] Fixes: 242d12c98174 ("mm: support large folios swap-in for sync io devices") Signed-off-by: Barry Song <[email protected]> Acked-by: David Hildenbrand <[email protected]> Reviewed-by: Baolin Wang <[email protected]> Cc: Chris Li <[email protected]> Cc: Yosry Ahmed <[email protected]> Cc: "Huang, Ying" <[email protected]> Cc: Kairui Song <[email protected]> Cc: Ryan Roberts <[email protected]> Cc: Kanchana P Sridhar <[email protected]> Cc: Usama Arif <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-10-30mm: avoid VM_BUG_ON when try to map an anon large folio to zero page.Zi Yan1-1/+2
An anonymous large folio can be split into non order-0 folios, try_to_map_unused_to_zeropage() should not VM_BUG_ON compound pages but just return false. This fixes the crash when splitting anonymous large folios to non order-0 folios. Link: https://lkml.kernel.org/r/[email protected] Fixes: b1f202060afe ("mm: remap unused subpages to shared zeropage when splitting isolated thp") Signed-off-by: Zi Yan <[email protected]> Acked-by: David Hildenbrand <[email protected]> Acked-by: Usama Arif <[email protected]> Cc: Barry Song <[email protected]> Cc: Domenico Cerasuolo <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Mike Rapoport (Microsoft) <[email protected]> Cc: Nico Pache <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Roman Gushchin <[email protected]> Cc: Ryan Roberts <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: Yu Zhao <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-10-30mm/codetag: fix null pointer check logic for ref and tagHao Ge1-6/+10
When we compile and load lib/slub_kunit.c,it will cause a panic. The root cause is that __kmalloc_cache_noprof was directly called instead of kmem_cache_alloc,which resulted in no alloc_tag being allocated.This caused current->alloc_tag to be null,leading to a null pointer dereference in alloc_tag_ref_set. Despite the fact that my colleague Pei Xiao will later fix the code in slub_kunit.c,we still need fix null pointer check logic for ref and tag to avoid panic caused by a null pointer dereference. Here is the log for the panic: [ 74.779373][ T2158] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 [ 74.780130][ T2158] Mem abort info: [ 74.780406][ T2158] ESR = 0x0000000096000004 [ 74.780756][ T2158] EC = 0x25: DABT (current EL), IL = 32 bits [ 74.781225][ T2158] SET = 0, FnV = 0 [ 74.781529][ T2158] EA = 0, S1PTW = 0 [ 74.781836][ T2158] FSC = 0x04: level 0 translation fault [ 74.782288][ T2158] Data abort info: [ 74.782577][ T2158] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 74.783068][ T2158] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 74.783533][ T2158] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 74.784010][ T2158] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000105f34000 [ 74.784586][ T2158] [0000000000000020] pgd=0000000000000000, p4d=0000000000000000 [ 74.785293][ T2158] Internal error: Oops: 0000000096000004 [#1] SMP [ 74.785805][ T2158] Modules linked in: slub_kunit kunit ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6table_nat ip6table_mangle 4 [ 74.790661][ T2158] CPU: 0 UID: 0 PID: 2158 Comm: kunit_try_catch Kdump: loaded Tainted: G W N 6.12.0-rc3+ #2 [ 74.791535][ T2158] Tainted: [W]=WARN, [N]=TEST [ 74.791889][ T2158] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 74.792479][ T2158] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 74.793101][ T2158] pc : alloc_tagging_slab_alloc_hook+0x120/0x270 [ 74.793607][ T2158] lr : alloc_tagging_slab_alloc_hook+0x120/0x270 [ 74.794095][ T2158] sp : ffff800084d33cd0 [ 74.794418][ T2158] x29: ffff800084d33cd0 x28: 0000000000000000 x27: 0000000000000000 [ 74.795095][ T2158] x26: 0000000000000000 x25: 0000000000000012 x24: ffff80007b30e314 [ 74.795822][ T2158] x23: ffff000390ff6f10 x22: 0000000000000000 x21: 0000000000000088 [ 74.796555][ T2158] x20: ffff000390285840 x19: fffffd7fc3ef7830 x18: ffffffffffffffff [ 74.797283][ T2158] x17: ffff8000800e63b4 x16: ffff80007b33afc4 x15: ffff800081654c00 [ 74.798011][ T2158] x14: 0000000000000000 x13: 205d383531325420 x12: 5b5d383734363537 [ 74.798744][ T2158] x11: ffff800084d337e0 x10: 000000000000005d x9 : 00000000ffffffd0 [ 74.799476][ T2158] x8 : 7f7f7f7f7f7f7f7f x7 : ffff80008219d188 x6 : c0000000ffff7fff [ 74.800206][ T2158] x5 : ffff0003fdbc9208 x4 : ffff800081edd188 x3 : 0000000000000001 [ 74.800932][ T2158] x2 : 0beaa6dee1ac5a00 x1 : 0beaa6dee1ac5a00 x0 : ffff80037c2cb000 [ 74.801656][ T2158] Call trace: [ 74.801954][ T2158] alloc_tagging_slab_alloc_hook+0x120/0x270 [ 74.802494][ T2158] __kmalloc_cache_noprof+0x148/0x33c [ 74.802976][ T2158] test_kmalloc_redzone_access+0x4c/0x104 [slub_kunit] [ 74.803607][ T2158] kunit_try_run_case+0x70/0x17c [kunit] [ 74.804124][ T2158] kunit_generic_run_threadfn_adapter+0x2c/0x4c [kunit] [ 74.804768][ T2158] kthread+0x10c/0x118 [ 74.805141][ T2158] ret_from_fork+0x10/0x20 [ 74.805540][ T2158] Code: b9400a80 11000400 b9000a80 97ffd858 (f94012d3) [ 74.806176][ T2158] SMP: stopping secondary CPUs [ 74.808130][ T2158] Starting crashdump kernel... Link: https://lkml.kernel.org/r/[email protected] Fixes: e0a955bf7f61 ("mm/codetag: add pgalloc_tag_copy()") Signed-off-by: Hao Ge <[email protected]> Acked-by: Suren Baghdasaryan <[email protected]> Suggested-by: Suren Baghdasaryan <[email protected]> Acked-by: Yu Zhao <[email protected]> Cc: Kent Overstreet <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-10-30mm/gup: stop leaking pinned pages in low memory conditionsJohn Hubbard1-14/+19
If a driver tries to call any of the pin_user_pages*(FOLL_LONGTERM) family of functions, and requests "too many" pages, then the call will erroneously leave pages pinned. This is visible in user space as an actual memory leak. Repro is trivial: just make enough pin_user_pages(FOLL_LONGTERM) calls to exhaust memory. The root cause of the problem is this sequence, within __gup_longterm_locked(): __get_user_pages_locked() rc = check_and_migrate_movable_pages() ...which gets retried in a loop. The loop error handling is incomplete, clearly due to a somewhat unusual and complicated tri-state error API. But anyway, if -ENOMEM, or in fact, any unexpected error is returned from check_and_migrate_movable_pages(), then __gup_longterm_locked() happily returns the error, while leaving the pages pinned. In the failed case, which is an app that requests (via a device driver) 30720000000 bytes to be pinned, and then exits, I see this: $ grep foll /proc/vmstat nr_foll_pin_acquired 7502048 nr_foll_pin_released 2048 And after applying this patch, it returns to balanced pins: $ grep foll /proc/vmstat nr_foll_pin_acquired 7502048 nr_foll_pin_released 7502048 Note that the child routine, check_and_migrate_movable_folios(), avoids this problem, by unpinning any folios in the **folios argument, before returning an error. Fix this by making check_and_migrate_movable_pages() behave in exactly the same way as check_and_migrate_movable_folios(): unpin all pages in **pages, before returning an error. Also, documentation was an aggravating factor, so: 1) Consolidate the documentation for these two routines, now that they have identical external behavior. 2) Rewrite the consolidated documentation: a) Clearly list the three return code cases, and what happens in each case. b) Mention that one of the cases unpins the pages or folios, before returning an error code. Link: https://lkml.kernel.org/r/[email protected] Fixes: 24a95998e9ba ("mm/gup.c: simplify and fix check_and_migrate_movable_pages() return codes") Signed-off-by: John Hubbard <[email protected]> Reviewed-by: Alistair Popple <[email protected]> Suggested-by: David Hildenbrand <[email protected]> Cc: Shigeru Yoshida <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Pasha Tatashin <[email protected]> Signed-off-by: Andrew Morton <[email protected]>
2024-10-30net: ethernet: mtk_wed: fix path of MT7988 WO firmwareDaniel Golle1-2/+2
linux-firmware commit 808cba84 ("mtk_wed: add firmware for mt7988 Wireless Ethernet Dispatcher") added mt7988_wo_{0,1}.bin in the 'mediatek/mt7988' directory while driver current expects the files in the 'mediatek' directory. Change path in the driver header now that the firmware has been added. Fixes: e2f64db13aa1 ("net: ethernet: mtk_wed: introduce WED support for MT7988") Signed-off-by: Daniel Golle <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-30Merge branch 'mlxsw-fixes'Jakub Kicinski10-10/+212
Petr Machata says: ==================== mlxsw: Fixes In this patchset: - Tx header should be pushed for each packet which is transmitted via Spectrum ASICs. Patch #1 adds a missing call to skb_cow_head() to make sure that there is both enough room to push the Tx header and that the SKB header is not cloned and can be modified. - Commit b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation") converted mlxsw to use page pool for Rx buffers allocation. Sync for CPU and for device should be done for Rx pages. In patches #2 and #3, add the missing calls to sync pages for, respectively, CPU and the device. - Patch #4 then fixes a bug to IPv6 GRE forwarding offload. Patch #5 adds a generic forwarding test that fails with mlxsw ports prior to the fix. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-30selftests: forwarding: Add IPv6 GRE remote change testsIdo Schimmel7-0/+164
Test that after changing the remote address of an ip6gre net device traffic is forwarded as expected. Test with both flat and hierarchical topologies and with and without an input / output keys. Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Link: https://patch.msgid.link/02b05246d2cdada0cf2fccffc0faa8a424d0f51b.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-30mlxsw: spectrum_ipip: Fix memory leak when changing remote IPv6 addressIdo Schimmel1-2/+24
The device stores IPv6 addresses that are used for encapsulation in linear memory that is managed by the driver. Changing the remote address of an ip6gre net device never worked properly, but since cited commit the following reproducer [1] would result in a warning [2] and a memory leak [3]. The problem is that the new remote address is never added by the driver to its hash table (and therefore the device) and the old address is never removed from it. Fix by programming the new address when the configuration of the ip6gre net device changes and removing the old one. If the address did not change, then the above would result in increasing the reference count of the address and then decreasing it. [1] # ip link add name bla up type ip6gre local 2001:db8:1::1 remote 2001:db8:2::1 tos inherit ttl inherit # ip link set dev bla type ip6gre remote 2001:db8:3::1 # ip link del dev bla # devlink dev reload pci/0000:01:00.0 [2] WARNING: CPU: 0 PID: 1682 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3002 mlxsw_sp_ipv6_addr_put+0x140/0x1d0 Modules linked in: CPU: 0 UID: 0 PID: 1682 Comm: ip Not tainted 6.12.0-rc3-custom-g86b5b55bc835 #151 Hardware name: Nvidia SN5600/VMOD0013, BIOS 5.13 05/31/2023 RIP: 0010:mlxsw_sp_ipv6_addr_put+0x140/0x1d0 [...] Call Trace: <TASK> mlxsw_sp_router_netdevice_event+0x55f/0x1240 notifier_call_chain+0x5a/0xd0 call_netdevice_notifiers_info+0x39/0x90 unregister_netdevice_many_notify+0x63e/0x9d0 rtnl_dellink+0x16b/0x3a0 rtnetlink_rcv_msg+0x142/0x3f0 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x242/0x390 netlink_sendmsg+0x1de/0x420 ____sys_sendmsg+0x2bd/0x320 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xd0 do_syscall_64+0x9e/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [3] unreferenced object 0xffff898081f597a0 (size 32): comm "ip", pid 1626, jiffies 4294719324 hex dump (first 32 bytes): 20 01 0d b8 00 02 00 00 00 00 00 00 00 00 00 01 ............... 21 49 61 83 80 89 ff ff 00 00 00 00 01 00 00 00 !Ia............. backtrace (crc fd9be911): [<00000000df89c55d>] __kmalloc_cache_noprof+0x1da/0x260 [<00000000ff2a1ddb>] mlxsw_sp_ipv6_addr_kvdl_index_get+0x281/0x340 [<000000009ddd445d>] mlxsw_sp_router_netdevice_event+0x47b/0x1240 [<00000000743e7757>] notifier_call_chain+0x5a/0xd0 [<000000007c7b9e13>] call_netdevice_notifiers_info+0x39/0x90 [<000000002509645d>] register_netdevice+0x5f7/0x7a0 [<00000000c2e7d2a9>] ip6gre_newlink_common.isra.0+0x65/0x130 [<0000000087cd6d8d>] ip6gre_newlink+0x72/0x120 [<000000004df7c7cc>] rtnl_newlink+0x471/0xa20 [<0000000057ed632a>] rtnetlink_rcv_msg+0x142/0x3f0 [<0000000032e0d5b5>] netlink_rcv_skb+0x50/0x100 [<00000000908bca63>] netlink_unicast+0x242/0x390 [<00000000cdbe1c87>] netlink_sendmsg+0x1de/0x420 [<0000000011db153e>] ____sys_sendmsg+0x2bd/0x320 [<000000003b6d53eb>] ___sys_sendmsg+0x9a/0xe0 [<00000000cae27c62>] __sys_sendmsg+0x7a/0xd0 Fixes: cf42911523e0 ("mlxsw: spectrum_ipip: Use common hash table for IPv6 address mapping") Reported-by: Maksym Yaremchuk <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Signed-off-by: Petr Machata <[email protected]> Link: https://patch.msgid.link/e91012edc5a6cb9df37b78fd377f669381facfcb.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-30mlxsw: pci: Sync Rx buffers for deviceAmit Cohen1-1/+2
Non-coherent architectures, like ARM, may require invalidating caches before the device can use the DMA mapped memory, which means that before posting pages to device, drivers should sync the memory for device. Sync for device can be configured as page pool responsibility. Set the relevant flag and define max_len for sync. Cc: Jiri Pirko <[email protected]> Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation") Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Petr Machata <[email protected]> Link: https://patch.msgid.link/92e01f05c4f506a4f0a9b39c10175dcc01994910.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-30mlxsw: pci: Sync Rx buffers for CPUAmit Cohen1-7/+15
When Rx packet is received, drivers should sync the pages for CPU, to ensure the CPU reads the data written by the device and not stale data from its cache. Add the missing sync call in Rx path, sync the actual length of data for each fragment. Cc: Jiri Pirko <[email protected]> Fixes: b5b60bb491b2 ("mlxsw: pci: Use page pool for Rx buffers allocation") Signed-off-by: Amit Cohen <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Petr Machata <[email protected]> Link: https://patch.msgid.link/461486fac91755ca4e04c2068c102250026dcd0b.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-30mlxsw: spectrum_ptp: Add missing verification before pushing Tx headerAmit Cohen1-0/+7
Tx header should be pushed for each packet which is transmitted via Spectrum ASICs. The cited commit moved the call to skb_cow_head() from mlxsw_sp_port_xmit() to functions which handle Tx header. In case that mlxsw_sp->ptp_ops->txhdr_construct() is used to handle Tx header, and txhdr_construct() is mlxsw_sp_ptp_txhdr_construct(), there is no call for skb_cow_head() before pushing Tx header size to SKB. This flow is relevant for Spectrum-1 and Spectrum-4, for PTP packets. Add the missing call to skb_cow_head() to make sure that there is both enough room to push the Tx header and that the SKB header is not cloned and can be modified. An additional set will be sent to net-next to centralize the handling of the Tx header by pushing it to every packet just before transmission. Cc: Richard Cochran <[email protected]> Fixes: 24157bc69f45 ("mlxsw: Send PTP packets as data packets to overcome a limitation") Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Petr Machata <[email protected]> Link: https://patch.msgid.link/5145780b07ebbb5d3b3570f311254a3a2d554a44.1729866134.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-30net: skip offload for NETIF_F_IPV6_CSUM if ipv6 header contains extensionBenoît Monin1-0/+4
As documented in skbuff.h, devices with NETIF_F_IPV6_CSUM capability can only checksum TCP and UDP over IPv6 if the IP header does not contains extension. This is enforced for UDP packets emitted from user-space to an IPv6 address as they go through ip6_make_skb(), which calls __ip6_append_data() where a check is done on the header size before setting CHECKSUM_PARTIAL. But the introduction of UDP encapsulation with fou6 added a code-path where it is possible to get an skb with a partial UDP checksum and an IPv6 header with extension: * fou6 adds a UDP header with a partial checksum if the inner packet does not contains a valid checksum. * ip6_tunnel adds an IPv6 header with a destination option extension header if encap_limit is non-zero (the default value is 4). The thread linked below describes in more details how to reproduce the problem with GRE-in-UDP tunnel. Add a check on the network header size in skb_csum_hwoffload_help() to make sure no IPv6 packet with extension header is handed to a network device with NETIF_F_IPV6_CSUM capability. Link: https://lore.kernel.org/netdev/[email protected]/T/#u Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels") Signed-off-by: Benoît Monin <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://patch.msgid.link/5fbeecfc311ea182aa1d1c771725ab8b4cac515e.1729778144.git.benoit.monin@gmx.fr Signed-off-by: Jakub Kicinski <[email protected]>
2024-10-31cfi: tweak llvm version for HAVE_CFI_ICALL_NORMALIZE_INTEGERSAlice Ryhl1-2/+2
The llvm fix [1] did not make it for 19.0.0, but ended up getting backported to llvm 19.1.3 [2]. Thus, fix the version requirement to correctly specify which versions have the bug. Link: https://github.com/llvm/llvm-project/pull/104826 [1] Link: https://github.com/llvm/llvm-project/pull/113938 [2] Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-lkp/[email protected] Fixes: 8b8ca9c25fe6 ("cfi: fix conditions for HAVE_CFI_ICALL_NORMALIZE_INTEGERS") Signed-off-by: Alice Ryhl <[email protected]> Reviewed-by: Sami Tolvanen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Miguel Ojeda <[email protected]>
2024-10-30sched/ext: Fix scx vs sched_delayedPeter Zijlstra1-2/+12
Commit 98442f0ccd82 ("sched: Fix delayed_dequeue vs switched_from_fair()") forgot about scx :/ Fixes: 98442f0ccd82 ("sched: Fix delayed_dequeue vs switched_from_fair()") Reported-by: Tejun Heo <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Tejun Heo <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2024-10-30x86/uaccess: Avoid barrier_nospec() in 64-bit copy_from_user()Linus Torvalds1-6/+15
The barrier_nospec() in 64-bit copy_from_user() is slow. Instead use pointer masking to force the user pointer to all 1's for an invalid address. The kernel test robot reports a 2.6% improvement in the per_thread_ops benchmark [1]. This is a variation on a patch originally by Josh Poimboeuf [2]. Link: https://lore.kernel.org/[email protected] [1] Link: https://lore.kernel.org/5b887fe4c580214900e21f6c61095adf9a142735.1730166635.git.jpoimboe@kernel.org [2] Tested-and-reviewed-by: Josh Poimboeuf <[email protected]> Cc: Kirill A. Shutemov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2024-10-30Merge tag 'perf-tools-fixes-for-v6.12-2-2024-10-30' of ↵Linus Torvalds18-51/+174
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools Pull perf tools fixes from Arnaldo Carvalho de Melo: - Update more header copies with the kernel sources, including const.h, msr-index.h, arm64's cputype.h, kvm's, bits.h and unaligned.h - The return from 'write' isn't a pid, fix cut'n'paste error in 'perf trace' - Fix up the python binding build on architectures without HAVE_KVM_STAT_SUPPORT - Add some more bounds checks to augmented_raw_syscalls.bpf.c (used to collect syscall pointer arguments in 'perf trace') to make the resulting bytecode to pass the kernel BPF verifier, allowing us to go back accepting clang 12.0.1 as the minimum version required for compiling BPF sources - Add __NR_capget for x86 to fix a regression on running perf + intel PT (hw tracing) as non-root setting up the capabilities as described in https://www.kernel.org/doc/html/latest/admin-guide/perf-security.html - Fix missing syscalltbl in non-explicitly listed architectures, noticed on ARM 32-bit, that still needs a .tbl generator for the syscall id<->name tables, should be added for v6.13 - Handle 'perf test' failure when handling broken DWARF for ASM files * tag 'perf-tools-fixes-for-v6.12-2-2024-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: perf cap: Add __NR_capget to arch/x86 unistd tools headers: Update the linux/unaligned.h copy with the kernel sources tools headers arm64: Sync arm64's cputype.h with the kernel sources tools headers: Synchronize {uapi/}linux/bits.h with the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources perf python: Fix up the build on architectures without HAVE_KVM_STAT_SUPPORT perf test: Handle perftool-testsuite_probe failure due to broken DWARF tools headers UAPI: Sync kvm headers with the kernel sources perf trace: Fix non-listed archs in the syscalltbl routines perf build: Change the clang check back to 12.0.1 perf trace augmented_raw_syscalls: Add more checks to pass the verifier perf trace augmented_raw_syscalls: Add extra array index bounds checking to satisfy some BPF verifiers perf trace: The return from 'write' isn't a pid tools headers UAPI: Sync linux/const.h with the kernel headers
2024-10-30rpcrdma: Always release the rpcrdma_device's xa_arrayChuck Lever1-0/+1
Dai pointed out that the xa_init_flags() in rpcrdma_add_one() needs to have a matching xa_destroy() in rpcrdma_remove_one() to release underlying memory that the xarray might have accrued during operation. Reported-by: Dai Ngo <[email protected]> Fixes: 7e86845a0346 ("rpcrdma: Implement generic device removal") Signed-off-by: Chuck Lever <[email protected]>
2024-10-30Merge branch 'fixes-for-bits-iterator'Alexei Starovoitov4-14/+118
Hou Tao says: ==================== The patch set fixes several issues in bits iterator. Patch #1 fixes the kmemleak problem of bits iterator. Patch #2~#3 fix the overflow problem of nr_bits. Patch #4 fixes the potential stack corruption when bits iterator is used on 32-bit host. Patch #5 adds more test cases for bits iterator. Please see the individual patches for more details. And comments are always welcome. --- v4: * patch #1: add ack from Yafang * patch #3: revert code-churn like changes: (1) compute nr_bytes and nr_bits before the check of nr_words. (2) use nr_bits == 64 to check for single u64, preventing build warning on 32-bit hosts. * patch #4: use "BITS_PER_LONG == 32" instead of "!defined(CONFIG_64BIT)" v3: https://lore.kernel.org/bpf/[email protected]/T/#t * split the bits-iterator related patches from "Misc fixes for bpf" patch set * patch #1: use "!nr_bits || bits >= nr_bits" to stop the iteration * patch #2: add a new helper for the overflow problem * patch #3: decrease the limitation from 512 to 511 and check whether nr_bytes is too large for bpf memory allocator explicitly * patch #5: add two more test cases for bit iterator v2: http://lore.kernel.org/bpf/[email protected] ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-10-30selftests/bpf: Add three test cases for bits_iterHou Tao1-3/+58
Add more test cases for bits iterator: (1) huge word test Verify the multiplication overflow of nr_bits in bits_iter. Without the overflow check, when nr_words is 67108865, nr_bits becomes 64, causing bpf_probe_read_kernel_common() to corrupt the stack. (2) max word test Verify correct handling of maximum nr_words value (511). (3) bad word test Verify early termination of bits iteration when bits iterator initialization fails. Also rename bits_nomem to bits_too_big to better reflect its purpose. Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-10-30bpf: Use __u64 to save the bits in bits iteratorHou Tao1-3/+30
On 32-bit hosts (e.g., arm32), when a bpf program passes a u64 to bpf_iter_bits_new(), bpf_iter_bits_new() will use bits_copy to store the content of the u64. However, bits_copy is only 4 bytes, leading to stack corruption. The straightforward solution would be to replace u64 with unsigned long in bpf_iter_bits_new(). However, this introduces confusion and problems for 32-bit hosts because the size of ulong in bpf program is 8 bytes, but it is treated as 4-bytes after passed to bpf_iter_bits_new(). Fix it by changing the type of both bits and bit_count from unsigned long to u64. However, the change is not enough. The main reason is that bpf_iter_bits_next() uses find_next_bit() to find the next bit and the pointer passed to find_next_bit() is an unsigned long pointer instead of a u64 pointer. For 32-bit little-endian host, it is fine but it is not the case for 32-bit big-endian host. Because under 32-bit big-endian host, the first iterated unsigned long will be the bits 32-63 of the u64 instead of the expected bits 0-31. Therefore, in addition to changing the type, swap the two unsigned longs within the u64 for 32-bit big-endian host. Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-10-30bpf: Check the validity of nr_words in bpf_iter_bits_new()Hou Tao1-1/+9
Check the validity of nr_words in bpf_iter_bits_new(). Without this check, when multiplication overflow occurs for nr_bits (e.g., when nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008). Fix it by limiting the maximum value of nr_words to 511. The value is derived from the current implementation of BPF memory allocator. To ensure compatibility if the BPF memory allocator's size limitation changes in the future, use the helper bpf_mem_alloc_check_size() to check whether nr_bytes is too larger. And return -E2BIG instead of -ENOMEM for oversized nr_bytes. Fixes: 4665415975b0 ("bpf: Add bits iterator") Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-10-30bpf: Add bpf_mem_alloc_check_size() helperHou Tao2-1/+16
Introduce bpf_mem_alloc_check_size() to check whether the allocation size exceeds the limitation for the kmalloc-equivalent allocator. The upper limit for percpu allocation is LLIST_NODE_SZ bytes larger than non-percpu allocation, so a percpu argument is added to the helper. The helper will be used in the following patch to check whether the size parameter passed to bpf_mem_alloc() is too big. Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-10-30bpf: Free dynamically allocated bits in bpf_iter_bits_destroy()Hou Tao1-6/+5
bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the bits are dynamically allocated. However, the check is incorrect and may cause a kmemleak as shown below: unreferenced object 0xffff88812628c8c0 (size 32): comm "swapper/0", pid 1, jiffies 4294727320 hex dump (first 32 bytes): b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U........... f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00 .............. backtrace (crc 781e32cc): [<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80 [<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0 [<00000000597124d6>] __alloc.isra.0+0x89/0xb0 [<000000004ebfffcd>] alloc_bulk+0x2af/0x720 [<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0 [<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610 [<000000008b616eac>] bpf_global_ma_init+0x19/0x30 [<00000000fc473efc>] do_one_initcall+0xd3/0x3c0 [<00000000ec81498c>] kernel_init_freeable+0x66a/0x940 [<00000000b119f72f>] kernel_init+0x20/0x160 [<00000000f11ac9a7>] ret_from_fork+0x3c/0x70 [<0000000004671da4>] ret_from_fork_asm+0x1a/0x30 That is because nr_bits will be set as zero in bpf_iter_bits_next() after all bits have been iterated. Fix the issue by setting kit->bit to kit->nr_bits instead of setting kit->nr_bits to zero when the iteration completes in bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to check whether the iteration is complete and still use "nr_bits > 64" to indicate whether bits are dynamically allocated. The "!nr_bits" check is necessary because bpf_iter_bits_new() may fail before setting kit->nr_bits, and this condition will stop the iteration early instead of accessing the zeroed or freed kit->bits. Considering the initial value of kit->bits is -1 and the type of kit->nr_bits is unsigned int, change the type of kit->nr_bits to int. The potential overflow problem will be handled in the following patch. Fixes: 4665415975b0 ("bpf: Add bits iterator") Acked-by: Yafang Shao <[email protected]> Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-10-30Bluetooth: hci: fix null-ptr-deref in hci_read_supported_codecsSungwoo Kim1-7/+11
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes. __hci_cmd_sync_sk() returns NULL if a command returns a status event. However, it also returns NULL where an opcode doesn't exist in the hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0] for unknown opcodes. This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes status = skb->data[0]. KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci7 hci_power_on RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138 Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78 RSP: 0018:ffff888120bafac8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040 RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4 RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054 R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000 FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline] hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline] hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline] hci_init_sync net/bluetooth/hci_sync.c:4742 [inline] hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline] hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994 hci_dev_do_open net/bluetooth/hci_core.c:483 [inline] hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015 process_one_work kernel/workqueue.c:3267 [inline] process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348 worker_thread+0x91f/0xe50 kernel/workqueue.c:3429 kthread+0x2cb/0x360 kernel/kthread.c:388 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY") Signed-off-by: Sungwoo Kim <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-10-30Merge tag 'scsi-fixes' of ↵Linus Torvalds2-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two small fixes, both in drivers (ufs and scsi_debug)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Fix another deadlock during RTC update scsi: scsi_debug: Fix do_device_access() handling of unexpected SG copy length
2024-10-30NFSD: Never decrement pending_async_copies on errorChuck Lever1-3/+1
The error flow in nfsd4_copy() calls cleanup_async_copy(), which already decrements nn->pending_async_copies. Reported-by: Olga Kornievskaia <[email protected]> Fixes: aadc3bbea163 ("NFSD: Limit the number of concurrent async COPY operations") Signed-off-by: Chuck Lever <[email protected]>
2024-10-30pmdomain: arm: Use FLAG_DEV_NAME_FW to ensure unique namesSibi Sankar1-1/+2
The domain attributes returned by the perf protocol can end up reporting identical names across domains, resulting in debugfs node creation failure. Use the GENPD_FLAG_DEV_NAME_FW to ensure the genpd providers end up with an unique name. Logs: [X1E reports 'NCC' for all its scmi perf domains] debugfs: Directory 'NCC' with parent 'pm_genpd' already present! debugfs: Directory 'NCC' with parent 'pm_genpd' already present! Reported-by: Johan Hovold <[email protected]> Closes: https://lore.kernel.org/lkml/[email protected]/ Suggested-by: Ulf Hansson <[email protected]> Suggested-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Sibi Sankar <[email protected]> Cc: [email protected] Message-ID: <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2024-10-30pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flagSibi Sankar2-15/+40
Introduce GENPD_FLAG_DEV_NAME_FW flag which instructs genpd to generate an unique device name using ida. It is aimed to be used by genpd providers which derive their names directly from FW making them susceptible to debugfs node creation failures. Reported-by: Johan Hovold <[email protected]> Closes: https://lore.kernel.org/lkml/[email protected]/ Fixes: 718072ceb211 ("PM: domains: create debugfs nodes when adding power domains") Suggested-by: Ulf Hansson <[email protected]> Suggested-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Sibi Sankar <[email protected]> Cc: [email protected] Message-ID: <[email protected]> Signed-off-by: Ulf Hansson <[email protected]>
2024-10-30drm/panthor: Report group as timedout when we fail to properly suspendBoris Brezillon1-4/+11
If we don't do that, the group is considered usable by userspace, but all further GROUP_SUBMIT will fail with -EINVAL. Changes in v3: - Add R-bs Changes in v2: - New patch Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block") Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Steven Price <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-10-30drm/panthor: Fail job creation when the group is deadBoris Brezillon1-0/+5
Userspace can use GROUP_SUBMIT errors as a trigger to check the group state and recreate the group if it became unusable. Make sure we report an error when the group became unusable. Changes in v3: - None Changes in v2: - Add R-bs Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block") Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Steven Price <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-10-30drm/panthor: Fix firmware initialization on systems with a page size > 4kBoris Brezillon4-8/+24
The system and GPU MMU page size might differ, which becomes a problem for FW sections that need to be mapped at explicit addresses since our PAGE_SIZE alignment might cover a VA range that's expected to be used for another section. Make sure we never map more than we need. Changes in v3: - Add R-bs Changes in v2: - Plan for per-VM page sizes so the MCU VM and user VM can have different pages sizes Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block") Signed-off-by: Boris Brezillon <[email protected]> Reviewed-by: Steven Price <[email protected]> Reviewed-by: Liviu Dudau <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-10-30nvme: re-fix error-handling for io_uring nvme-passthroughKeith Busch1-2/+5
This was previously fixed with commit 1147dd0503564fa0e0348 ("nvme: fix error-handling for io_uring nvme-passthrough"), but the change was mistakenly undone in a later commit. Fixes: d6aacee9255e7f ("nvme: use bio_integrity_map_user") Cc: [email protected] Reported-by: Jens Axboe <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Anuj Gupta <[email protected]> Reviewed-by: Kanchan Joshi <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2024-10-30nvmet-auth: assign dh_key to NULL after kfree_sensitiveVitaliy Shevtsov1-0/+1
ctrl->dh_key might be used across multiple calls to nvmet_setup_dhgroup() for the same controller. So it's better to nullify it after release on error path in order to avoid double free later in nvmet_destroy_auth(). Found by Linux Verification Center (linuxtesting.org) with Svace. Fixes: 7a277c37d352 ("nvmet-auth: Diffie-Hellman key exchange support") Cc: [email protected] Signed-off-by: Vitaliy Shevtsov <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2024-10-30nvme: module parameter to disable pi with offsetsKeith Busch1-2/+17
A recent commit enables integrity checks for formats the previous kernel versions registered with the "nop" integrity profile. This means namespaces using that format become unreadable when upgrading the kernel past that commit. Introduce a module parameter to restore the "nop" integrity profile so that storage can be readable once again. This could be a boot device, so the setting needs to happen at module load time. Fixes: 921e81db524d17 ("nvme: allow integrity when PI is not in first bytes") Reported-by: David Wei <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Kanchan Joshi <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2024-10-30ALSA: hda/realtek: Fix headset mic on TUXEDO Stellaris 16 Gen6 mb1Christoffer Sandberg1-0/+1
Quirk is needed to enable headset microphone on missing pin 0x19. Signed-off-by: Christoffer Sandberg <[email protected]> Signed-off-by: Werner Sembach <[email protected]> Cc: <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-10-30ALSA: hda/realtek: Fix headset mic on TUXEDO Gemini 17 Gen3Christoffer Sandberg1-0/+1
Quirk is needed to enable headset microphone on missing pin 0x19. Signed-off-by: Christoffer Sandberg <[email protected]> Signed-off-by: Werner Sembach <[email protected]> Cc: <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-10-30ALSA: usb-audio: Add quirks for Dell WD19 dockJan Schär1-0/+3
The WD19 family of docks has the same audio chipset as the WD15. This change enables jack detection on the WD19. We don't need the dell_dock_mixer_init quirk for the WD19. It is only needed because of the dell_alc4020_map quirk for the WD15 in mixer_maps.c, which disables the volume controls. Even for the WD15, this quirk was apparently only needed when the dock firmware was not updated. Signed-off-by: Jan Schär <[email protected]> Cc: <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-10-30Merge tag 'asoc-fix-v6.12-rc5' of ↵Takashi Iwai9-28/+144
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.12 The biggest set of changes here is Hans' fixes and quirks for various Baytrail based platforms with RT5640 CODECs, and there's one core fix for a missed length assignment for __counted_by() checking. Otherwise it's small device specific fixes, several of them in the DT bindings.
2024-10-30netfilter: nf_reject_ipv6: fix potential crash in nf_send_reset6()Eric Dumazet1-8/+7
I got a syzbot report without a repro [1] crashing in nf_send_reset6() I think the issue is that dev->hard_header_len is zero, and we attempt later to push an Ethernet header. Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c. [1] skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc900045269b0 EFLAGS: 00010282 RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800 RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000 RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140 R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 eth_header+0x38/0x1f0 net/ethernet/eth.c:83 dev_hard_header include/linux/netdevice.h:3208 [inline] nf_send_reset6+0xce6/0x1270 net/ipv6/netfilter/nf_reject_ipv6.c:358 nft_reject_inet_eval+0x3b9/0x690 net/netfilter/nft_reject_inet.c:48 expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline] nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288 nft_do_chain_inet+0x418/0x6b0 net/netfilter/nft_chain_filter.c:161 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] NF_HOOK include/linux/netfilter.h:312 [inline] br_nf_pre_routing_ipv6+0x63e/0x770 net/bridge/br_netfilter_ipv6.c:184 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_bridge_pre net/bridge/br_input.c:277 [inline] br_handle_frame+0x9fd/0x1530 net/bridge/br_input.c:424 __netif_receive_skb_core+0x13e8/0x4570 net/core/dev.c:5562 __netif_receive_skb_one_core net/core/dev.c:5666 [inline] __netif_receive_skb+0x12f/0x650 net/core/dev.c:5781 netif_receive_skb_internal net/core/dev.c:5867 [inline] netif_receive_skb+0x1e8/0x890 net/core/dev.c:5926 tun_rx_batched+0x1b7/0x8f0 drivers/net/tun.c:1550 tun_get_user+0x3056/0x47e0 drivers/net/tun.c:2007 tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2053 new_sync_write fs/read_write.c:590 [inline] vfs_write+0xa6d/0xc90 fs/read_write.c:683 ksys_write+0x183/0x2b0 fs/read_write.c:736 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fdbeeb7d1ff Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 c9 8d 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 1c 8e 02 00 48 RSP: 002b:00007fdbee5ff000 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fdbeed36058 RCX: 00007fdbeeb7d1ff RDX: 000000000000008e RSI: 0000000020000040 RDI: 00000000000000c8 RBP: 00007fdbeebf12be R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000008e R11: 0000000000000293 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fdbeed36058 R15: 00007ffc38de06e8 </TASK> Fixes: c8d7b98bec43 ("netfilter: move nf_send_resetX() code to nf_reject_ipvX modules") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-10-30netfilter: Fix use-after-free in get_info()Dong Chenchen1-1/+1
ip6table_nat module unload has refcnt warning for UAF. call trace is: WARNING: CPU: 1 PID: 379 at kernel/module/main.c:853 module_put+0x6f/0x80 Modules linked in: ip6table_nat(-) CPU: 1 UID: 0 PID: 379 Comm: ip6tables Not tainted 6.12.0-rc4-00047-gc2ee9f594da8-dirty #205 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:module_put+0x6f/0x80 Call Trace: <TASK> get_info+0x128/0x180 do_ip6t_get_ctl+0x6a/0x430 nf_getsockopt+0x46/0x80 ipv6_getsockopt+0xb9/0x100 rawv6_getsockopt+0x42/0x190 do_sock_getsockopt+0xaa/0x180 __sys_getsockopt+0x70/0xc0 __x64_sys_getsockopt+0x20/0x30 do_syscall_64+0xa2/0x1a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Concurrent execution of module unload and get_info() trigered the warning. The root cause is as follows: cpu0 cpu1 module_exit //mod->state = MODULE_STATE_GOING ip6table_nat_exit xt_unregister_template kfree(t) //removed from templ_list getinfo() t = xt_find_table_lock list_for_each_entry(tmpl, &xt_templates[af]...) if (strcmp(tmpl->name, name)) continue; //table not found try_module_get list_for_each_entry(t, &xt_net->tables[af]...) return t; //not get refcnt module_put(t->me) //uaf unregister_pernet_subsys //remove table from xt_net list While xt_table module was going away and has been removed from xt_templates list, we couldnt get refcnt of xt_table->me. Check module in xt_net->tables list re-traversal to fix it. Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default") Signed-off-by: Dong Chenchen <[email protected]> Reviewed-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-10-30selftests: netfilter: remove unused parameterLiu Jing1-3/+3
err is never used, remove it. Signed-off-by: Liu Jing <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2024-10-30xfs: streamline xfs_filestream_pick_agChristoph Hellwig1-50/+46
Directly return the error from xfs_bmap_longest_free_extent instead of breaking from the loop and handling it there, and use a done label to directly jump to the exist when we found a suitable perag structure to reduce the indentation level and pag/max_pag check complexity in the tail of the function. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Carlos Maiolino <[email protected]>
2024-10-30xfs: fix finding a last resort AG in xfs_filestream_pick_agChristoph Hellwig2-21/+17
When the main loop in xfs_filestream_pick_ag fails to find a suitable AG it tries to just pick the online AG. But the loop for that uses args->pag as loop iterator while the later code expects pag to be set. Fix this by reusing the max_pag case for this last resort, and also add a check for impossible case of no AG just to make sure that the uninitialized pag doesn't even escape in theory. Reported-by: [email protected] Signed-off-by: Christoph Hellwig <[email protected]> Tested-by: [email protected] Fixes: f8f1ed1ab3baba ("xfs: return a referenced perag from filestreams allocator") Cc: <[email protected]> # v6.3 Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Carlos Maiolino <[email protected]>
2024-10-30xfs: Reduce unnecessary searches when searching for the best extentsChi Zhiling1-1/+1
Recently, we found that the CPU spent a lot of time in xfs_alloc_ag_vextent_size when the filesystem has millions of fragmented spaces. The reason is that we conducted much extra searching for extents that could not yield a better result, and these searches would cost a lot of time when there were millions of extents to search through. Even if we get the same result length, we don't switch our choice to the new one, so we can definitely terminate the search early. Since the result length cannot exceed the found length, when the found length equals the best result length we already have, we can conclude the search. We did a test in that filesystem: [root@localhost ~]# xfs_db -c freesp /dev/vdb from to extents blocks pct 1 1 215 215 0.01 2 3 994476 1988952 99.99 Before this patch: 0) | xfs_alloc_ag_vextent_size [xfs]() { 0) * 15597.94 us | } After this patch: 0) | xfs_alloc_ag_vextent_size [xfs]() { 0) 19.176 us | } Signed-off-by: Chi Zhiling <[email protected]> Reviewed-by: Dave Chinner <[email protected]> Signed-off-by: Carlos Maiolino <[email protected]>
2024-10-30xfs: Check for delayed allocations before setting extsizeOjaswin Mujoo3-3/+8
Extsize should only be allowed to be set on files with no data in it. For this, we check if the files have extents but miss to check if delayed extents are present. This patch adds that check. While we are at it, also refactor this check into a helper since it's used in some other places as well like xfs_inactive() or xfs_ioctl_setattr_xflags() **Without the patch (SUCCEEDS)** $ xfs_io -c 'open -f testfile' -c 'pwrite 0 1024' -c 'extsize 65536' wrote 1024/1024 bytes at offset 0 1 KiB, 1 ops; 0.0002 sec (4.628 MiB/sec and 4739.3365 ops/sec) **With the patch (FAILS as expected)** $ xfs_io -c 'open -f testfile' -c 'pwrite 0 1024' -c 'extsize 65536' wrote 1024/1024 bytes at offset 0 1 KiB, 1 ops; 0.0002 sec (4.628 MiB/sec and 4739.3365 ops/sec) xfs_io: FS_IOC_FSSETXATTR testfile: Invalid argument Fixes: e94af02a9cd7 ("[XFS] fix old xfs_setattr mis-merge from irix; mostly harmless esp if not using xfs rt") Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Reviewed-by: John Garry <[email protected]> Signed-off-by: Ojaswin Mujoo <[email protected]> Signed-off-by: Carlos Maiolino <[email protected]>
2024-10-30accel/ivpu: Fix NOC firewall interrupt handlingAndrzej Kacprowski4-1/+15
The NOC firewall interrupt means that the HW prevented unauthorized access to a protected resource, so there is no need to trigger device reset in such case. To facilitate security testing add firewall_irq_counter debugfs file that tracks firewall interrupts. Fixes: 8a27ad81f7d3 ("accel/ivpu: Split IP and buttress code") Cc: [email protected] # v6.11+ Signed-off-by: Andrzej Kacprowski <[email protected]> Reviewed-by: Jacek Lawrynowicz <[email protected]> Reviewed-by: Jeffrey Hugo <[email protected]> Signed-off-by: Jacek Lawrynowicz <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-10-29bpf: disallow 40-bytes extra stack for bpf_fastcall patternsEduard Zingerman2-67/+2
Hou Tao reported an issue with bpf_fastcall patterns allowing extra stack space above MAX_BPF_STACK limit. This extra stack allowance is not integrated properly with the following verifier parts: - backtracking logic still assumes that stack can't exceed MAX_BPF_STACK; - bpf_verifier_env->scratched_stack_slots assumes only 64 slots are available. Here is an example of an issue with precision tracking (note stack slot -8 tracked as precise instead of -520): 0: (b7) r1 = 42 ; R1_w=42 1: (b7) r2 = 42 ; R2_w=42 2: (7b) *(u64 *)(r10 -512) = r1 ; R1_w=42 R10=fp0 fp-512_w=42 3: (7b) *(u64 *)(r10 -520) = r2 ; R2_w=42 R10=fp0 fp-520_w=42 4: (85) call bpf_get_smp_processor_id#8 ; R0_w=scalar(...) 5: (79) r2 = *(u64 *)(r10 -520) ; R2_w=42 R10=fp0 fp-520_w=42 6: (79) r1 = *(u64 *)(r10 -512) ; R1_w=42 R10=fp0 fp-512_w=42 7: (bf) r3 = r10 ; R3_w=fp0 R10=fp0 8: (0f) r3 += r2 mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r2 stack= before 7: (bf) r3 = r10 mark_precise: frame0: regs=r2 stack= before 6: (79) r1 = *(u64 *)(r10 -512) mark_precise: frame0: regs=r2 stack= before 5: (79) r2 = *(u64 *)(r10 -520) mark_precise: frame0: regs= stack=-8 before 4: (85) call bpf_get_smp_processor_id#8 mark_precise: frame0: regs= stack=-8 before 3: (7b) *(u64 *)(r10 -520) = r2 mark_precise: frame0: regs=r2 stack= before 2: (7b) *(u64 *)(r10 -512) = r1 mark_precise: frame0: regs=r2 stack= before 1: (b7) r2 = 42 9: R2_w=42 R3_w=fp42 9: (95) exit This patch disables the additional allowance for the moment. Also, two test cases are removed: - bpf_fastcall_max_stack_ok: it fails w/o additional stack allowance; - bpf_fastcall_max_stack_fail: this test is no longer necessary, stack size follows regular rules, pattern invalidation is checked by other test cases. Reported-by: Hou Tao <[email protected]> Closes: https://lore.kernel.org/bpf/[email protected]/ Fixes: 5b5f51bff1b6 ("bpf: no_caller_saved_registers attribute for helper calls") Signed-off-by: Eduard Zingerman <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Tested-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2024-10-29Merge tag 'cgroup-for-6.12-rc5-fixes' of ↵Linus Torvalds2-3/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - cgroup_bpf_release_fn() could saturate system_wq with cgrp->bpf.release_work which can then form a circular dependency leading to deadlocks. Fix by using a dedicated workqueue. The system_wq's max concurrency limit is being increased separately. - Fix theoretical off-by-one bug when enforcing max cgroup hierarchy depth * tag 'cgroup-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Fix potential overflow issue when checking max_depth cgroup/bpf: use a dedicated workqueue for cgroup bpf destruction
2024-10-29Merge tag 'sched_ext-for-6.12-rc5-fixes' of ↵Linus Torvalds24-100/+119
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext fixes from Tejun Heo: - Instances of scx_ops_bypass() could race each other leading to misbehavior. Fix by protecting the operation with a spinlock. - selftest and userspace header fixes * tag 'sched_ext-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: sched_ext: Fix enq_last_no_enq_fails selftest sched_ext: Make cast_mask() inline scx: Fix raciness in scx_ops_bypass() scx: Fix exit selftest to use custom DSQ sched_ext: Fix function pointer type mismatches in BPF selftests selftests/sched_ext: add order-only dependency of runner.o on BPFOBJ
2024-10-29Merge tag 'slab-for-6.12-rc6' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab fixes from Vlastimil Babka: - Fix for a slub_kunit test warning with MEM_ALLOC_PROFILING_DEBUG (Pei Xiao) - Fix for a MTE-based KASAN BUG in krealloc() (Qun-Wei Lin) * tag 'slab-for-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm: krealloc: Fix MTE false alarm in __do_krealloc slub/kunit: fix a WARNING due to unwrapped __kmalloc_cache_noprof