| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The description of PDU1 format usage mistakenly referred to PDU2 format.
Signed-off-by: Alexander Hölzl <[email protected]>
Acked-by: Oleksij Rempel <[email protected]>
Acked-by: Vincent Mailhol <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
Out-of-bounds access occurs if the fast device is expanded unexpectedly
before the first-time resume of the cache table. This happens because
expanding the fast device requires reloading the cache table for
cache_create to allocate new in-core data structures that fit the new
size, and the check in cache_preresume is not performed during the
first resume, leading to the issue.
Reproduce steps:
1. prepare component devices:
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
2. load a cache table of 512 cache blocks, and deliberately expand the
fast device before resuming the cache, making the in-core data
structures inadequate.
dmsetup create cache --notable
dmsetup reload cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup reload cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache
3. suspend the cache to write out the in-core dirty bitset and hint
array, leading to out-of-bounds access to the dirty bitset at offset
0x40:
dmsetup suspend cache
KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in is_dirty_callback+0x2b/0x80
Read of size 8 at addr ffffc90000085040 by task dmsetup/90
(...snip...)
The buggy address belongs to the virtual mapping at
[ffffc90000085000, ffffc90000087000) created by:
cache_ctr+0x176a/0x35f0
(...snip...)
Memory state around the buggy address:
ffffc90000084f00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000084f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>ffffc90000085000: 00 00 00 00 00 00 00 00 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc90000085080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc90000085100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
Fix by checking the size change on the first resume.
Signed-off-by: Ming-Hung Tsai <[email protected]>
Fixes: f494a9c6b1b6 ("dm cache: cache shrinking support")
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Acked-by: Joe Thornber <[email protected]>
|
|
When shrinking the fast device, dm-cache iteratively searches for a
dirty bit among the cache blocks to be dropped, which is less efficient.
Use find_next_bit instead, as it is twice as fast as the iterative
approach with test_bit.
Signed-off-by: Ming-Hung Tsai <[email protected]>
Fixes: f494a9c6b1b6 ("dm cache: cache shrinking support")
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Acked-by: Joe Thornber <[email protected]>
|
|
dm-cache checks the dirty bits of the cache blocks to be dropped when
shrinking the fast device, but an index bug in bitset iteration causes
out-of-bounds access.
Reproduce steps:
1. create a cache device of 1024 cache blocks (128 bytes dirty bitset)
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. shrink the fast device to 512 cache blocks, triggering out-of-bounds
access to the dirty bitset (offset 0x80)
dmsetup suspend cache
dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup resume cdata
dmsetup resume cache
KASAN reports:
BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0
Read of size 8 at addr ffffc900000f3080 by task dmsetup/131
(...snip...)
The buggy address belongs to the virtual mapping at
[ffffc900000f3000, ffffc900000f5000) created by:
cache_ctr+0x176a/0x35f0
(...snip...)
Memory state around the buggy address:
ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
Fix by making the index post-incremented.
Signed-off-by: Ming-Hung Tsai <[email protected]>
Fixes: f494a9c6b1b6 ("dm cache: cache shrinking support")
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Acked-by: Joe Thornber <[email protected]>
|
|
An unexpected WARN_ON from flush_work() may occur when cache creation
fails, caused by destroying the uninitialized delayed_work waker in the
error path of cache_create(). For example, the warning appears on the
superblock checksum error.
Reproduce steps:
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/urandom of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
Kernel logs:
(snip)
WARNING: CPU: 0 PID: 84 at kernel/workqueue.c:4178 __flush_work+0x5d4/0x890
Fix by pulling out the cancel_delayed_work_sync() from the constructor's
error path. This patch doesn't affect the use-after-free fix for
concurrent dm_resume and dm_destroy (commit 6a459d8edbdb ("dm cache: Fix
UAF in destroy()")) as cache_dtr is not changed.
Signed-off-by: Ming-Hung Tsai <[email protected]>
Fixes: 6a459d8edbdb ("dm cache: Fix UAF in destroy()")
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Acked-by: Joe Thornber <[email protected]>
|
|
When creating a cache device, the actual size of the cache origin might
be greater than the specified cache target length. In such case, the
number of origin blocks should match the cache target length, not the
full size of the origin device, since access beyond the cache target is
not possible. This issue occurs when reducing the origin device size
using lvm, as lvreduce preloads the new cache table before resuming the
cache origin, which can result in incorrect sizes for the discard bitset
and smq hotspot blocks.
Reproduce steps:
1. create a cache device consists of 4096 origin blocks
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 65536 linear /dev/sdc 8192"
dmsetup create corig --table "0 524288 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. reduce the cache origin to 2048 oblocks, in lvreduce's approach
dmsetup reload corig --table "0 262144 linear /dev/sdc 262144"
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
dmsetup suspend cache
dmsetup suspend corig
dmsetup suspend cdata
dmsetup suspend cmeta
dmsetup resume corig
dmsetup resume cdata
dmsetup resume cmeta
dmsetup resume cache
3. shutdown the cache, and check the number of discard blocks in
superblock. The value is expected to be 2048, but actually is 4096.
dmsetup remove cache corig cdata cmeta
dd if=/dev/sdc bs=1c count=8 skip=224 2>/dev/null | hexdump -e '1/8 "%u\n"'
Fix by correcting the origin_blocks initialization in cache_create and
removing the unused origin_sectors from struct cache_args accordingly.
Signed-off-by: Ming-Hung Tsai <[email protected]>
Fixes: c6b4fcbad044 ("dm: add cache target")
Cc: [email protected]
Signed-off-by: Mikulas Patocka <[email protected]>
Acked-by: Joe Thornber <[email protected]>
|
|
If the user sets panic_on_error and doesn't set panic_on_corruption,
dm-verity should not panic on data mismatch. But, currently it panics,
because it treats data mismatch as I/O error.
This commit fixes the logic so that if there is data mismatch and
panic_on_corruption or restart_on_corruption is not selected, the system
won't restart or panic.
Signed-off-by: Mikulas Patocka <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Fixes: f811b83879fb ("dm-verity: introduce the options restart_on_error and panic_on_error")
|
|
This was found by a static analyzer.
There may be a potential integer overflow issue in
unstripe_ctr(). uc->unstripe_offset and uc->unstripe_width are
defined as "sector_t"(uint64_t), while uc->unstripe,
uc->chunk_size and uc->stripes are all defined as "uint32_t".
The result of the calculation will be limited to "uint32_t"
without correct casting.
So, we recommend adding an extra cast to prevent potential
integer overflow.
Fixes: 18a5bf270532 ("dm: add unstriped target")
Signed-off-by: Zichen Xie <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
|
|
Flush the g2h worker explicitly if TLB timeout happens which is
observed on LNL and that points to the recent scheduling issue with
E-cores on LNL.
This is similar to the recent fix:
commit e51527233804 ("drm/xe/guc/ct: Flush g2h worker in case of g2h
response timeout") and should be removed once there is E core
scheduling fix.
v2: Add platform check(Himal)
v3: Remove gfx platform check as the issue related to cpu
platform(John)
Use the common WA macro(John) and print when the flush
resolves timeout(Matt B)
v4: Remove the resolves log and do the flush before taking
pending_lock(Matt A)
Cc: Badal Nilawar <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Matthew Auld <[email protected]>
Cc: John Harrison <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: [email protected] # v6.11+
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2687
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
(cherry picked from commit e1f6fa55664a0eeb0a641f497e1adfcf6672e995)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Flush xe ordered_wq in case of ufence timeout which is observed
on LNL and that points to recent scheduling issue with E-cores.
This is similar to the recent fix:
commit e51527233804 ("drm/xe/guc/ct: Flush g2h worker in case of g2h
response timeout") and should be removed once there is a E-core
scheduling fix for LNL.
v2: Add platform check(Himal)
s/__flush_workqueue/flush_workqueue(Jani)
v3: Remove gfx platform check as the issue related to cpu
platform(John)
v4: Use the Common macro(John) and print when the flush resolves
timeout(Matt B)
Cc: Badal Nilawar <[email protected]>
Cc: Matthew Auld <[email protected]>
Cc: John Harrison <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Cc: Lucas De Marchi <[email protected]>
Cc: [email protected] # v6.11+
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2754
Suggested-by: Matthew Brost <[email protected]>
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
(cherry picked from commit 38c4c8722bd74452280951edc44c23de47612001)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Move LNL scheduling WA to xe_device.h so this can be used in other
places without needing keep the same comment about removal of this WA
in the future. The WA, which flushes work or workqueues, is now wrapped
in macros and can be reused wherever needed.
Cc: Badal Nilawar <[email protected]>
Cc: Matthew Auld <[email protected]>
Cc: Matthew Brost <[email protected]>
Cc: Himal Prasad Ghimiray <[email protected]>
Cc: Lucas De Marchi <[email protected]>
cc: [email protected] # v6.11+
Suggested-by: John Harrison <[email protected]>
Signed-off-by: Nirmoy Das <[email protected]>
Reviewed-by: Matthew Auld <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
(cherry picked from commit cbe006a6492c01a0058912ae15d473f4c149896c)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
Drop the exclusive client count tracking and use the filelist from the
drm to track the active clients. This also ensures the clients created
internally by the driver won't block changing the ccs mode.
Fixes: ce8c161cbad4 ("drm/xe: Add ref counting for xe_file")
Signed-off-by: Balasubramani Vivekanandan <[email protected]>
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
(cherry picked from commit 1c35f1ed1fe3c649f8c16214d0d3dd828b5265d9)
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
CCS_MODE register requires setting mask bits from Xe2+ platforms. Set
the mask bits unconditionally, as those bits are unused for older
platforms.
Signed-off-by: Balasubramani Vivekanandan <[email protected]>
Cc: [email protected] # v6.11+
Reviewed-by: Lucas De Marchi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Lucas De Marchi <[email protected]>
(cherry picked from commit 23ea2c7572d4735ef66beb1e4feb8ae510b78247)
[ Fix conflict with mmio refactors ]
Signed-off-by: Lucas De Marchi <[email protected]>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal driver fixes for 6.12-rc7 from Daniel Lezcano:
"- Remove a false lockdep backtrace in the LMh driver (Dmitry
Baryshkov)
- Fix sampling handler context ptr in the libthermal (Emil Dahl Juhl)
- Remove the thermal soft link when doing a make clean. The link is
created at compilation time (Zhang Jiao)
- Accept thermal zone without trip points as stated in the bindings,
otherwise the thermal zone fails to initialize (Icenowy Zheng)"
* tag 'thermal-v6.12-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/of: support thermal zones w/o trips subnode
tools/lib/thermal: Remove the thermal.h soft link when doing make clean
tools/lib/thermal: Fix sampling handler context ptr
thermal/drivers/qcom/lmh: Remove false lockdep backtrace
|
|
Multi-threaded buffered reads to the same file exposed significant
inode spinlock contention in nfs_clear_invalid_mapping().
Eliminate this spinlock contention by checking flags without locking,
instead using smp_rmb and smp_load_acquire accordingly, but then take
spinlock and double-check these inode flags.
Also refactor nfs_set_cache_invalid() slightly to use
smp_store_release() to pair with nfs_clear_invalid_mapping()'s
smp_load_acquire().
While this fix is beneficial for all multi-threaded buffered reads
issued by an NFS client, this issue was identified in the context of
surprisingly low LOCALIO performance with 4K multi-threaded buffered
read IO. This fix dramatically speeds up LOCALIO performance:
before: read: IOPS=1583k, BW=6182MiB/s (6482MB/s)(121GiB/20002msec)
after: read: IOPS=3046k, BW=11.6GiB/s (12.5GB/s)(232GiB/20001msec)
Fixes: 17dfeb911339 ("NFS: Fix races in nfs_revalidate_mapping")
Signed-off-by: Mike Snitzer <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Fix the possibility of racing nfs_local_probe() resulting in:
list_add double add: new=ffff8b99707f9f58, prev=ffff8b99707f9f58, next=ffffffffc0f30000.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:35!
Add nfs_uuid_init() to properly initialize all nfs_uuid_t members
(particularly its list_head).
Switch to returning bool from nfs_uuid_begin(), returns false if
nfs_uuid_t is already in-use (its list_head is on a list). Update
nfs_local_probe() to return early if the nfs_client's cl_uuid
(nfs_uuid_t) is in-use.
Also, switch nfs_uuid_begin() from using list_add_tail_rcu() to
list_add_tail() -- rculist was used in an earlier version of the
localio code that had a lockless nfs_uuid_lookup interface.
Signed-off-by: Mike Snitzer <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
When asked to set both an atime and an mtime to the current system time,
ensure that the setting is atomic by calling inode_update_timestamps()
only once with the appropriate flags.
Fixes: e12912d94137 ("NFSv4: Add support for delegated atime and mtime attributes")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
When the client does an exclusive create and the server decides to store
the verifier in the timestamps, a SETATTR is subsequently sent to fix up
those timestamps. When that is the case, suppress the exceptions for
attribute delegations in nfs4_bitmap_copy_adjust().
Fixes: 32215c1f893a ("NFSv4: Don't request atime/mtime/size if they are delegated to us")
Signed-off-by: Trond Myklebust <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Fix the following KMSAN warning:
CPU: 1 UID: 0 PID: 7651 Comm: cp Tainted: G B
Tainted: [B]=BAD_PAGE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
=====================================================
=====================================================
BUG: KMSAN: uninit-value in decode_getfattr_attrs+0x2d6d/0x2f90
decode_getfattr_attrs+0x2d6d/0x2f90
decode_getfattr_generic+0x806/0xb00
nfs4_xdr_dec_getattr+0x1de/0x240
rpcauth_unwrap_resp_decode+0xab/0x100
rpcauth_unwrap_resp+0x95/0xc0
call_decode+0x4ff/0xb50
__rpc_execute+0x57b/0x19d0
rpc_execute+0x368/0x5e0
rpc_run_task+0xcfe/0xee0
nfs4_proc_getattr+0x5b5/0x990
__nfs_revalidate_inode+0x477/0xd00
nfs_access_get_cached+0x1021/0x1cc0
nfs_do_access+0x9f/0xae0
nfs_permission+0x1e4/0x8c0
inode_permission+0x356/0x6c0
link_path_walk+0x958/0x1330
path_lookupat+0xce/0x6b0
filename_lookup+0x23e/0x770
vfs_statx+0xe7/0x970
vfs_fstatat+0x1f2/0x2c0
__se_sys_newfstatat+0x67/0x880
__x64_sys_newfstatat+0xbd/0x120
x64_sys_call+0x1826/0x3cf0
do_syscall_64+0xd0/0x1b0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The KMSAN warning is triggered in decode_getfattr_attrs(), when calling
decode_attr_mdsthreshold(). It appears that fattr->mdsthreshold is not
initialized.
Fix the issue by initializing fattr->mdsthreshold to NULL in
nfs_fattr_init().
Cc: [email protected] # v3.5.x
Fixes: 88034c3d88c2 ("NFSv4.1 mdsthreshold attribute xdr")
Signed-off-by: Roberto Sassu <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
If a timeout is specified in the mount options, it currently applies to
both the NFS protocol and (with v3) the MOUNT protocol. This is
sensible when they both use the same underlying protocol, or those
protocols are compatible w.r.t timeouts as RDMA and TCP are.
However if, for example, NFS is using TCP and MOUNT is using UDP then
using the same timeout doesn't make much sense.
If you
mount -o vers=3,proto=tcp,mountproto=udp,timeo=600,retrans=5 \
server:/path /mountpoint
then the timeo=600 which was intended for the NFS/TCP request will
apply to the MOUNT/UDP requests with the result that there will only be
one request sent (because UDP has a maximum timeout of 60 seconds).
This is not what a reasonable person might expect.
This patch disables the sharing of timeout information in cases where
the underlying protocols are not compatible.
Fixes: c9301cb35b59 ("nfs: hornor timeo and retrans option when mounting NFSv3")
Signed-off-by: NeilBrown <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
xs_tcp_finish_connecting() can return -ENOTCONN but the switch statement
in xs_tcp_setup_socket() treats that as an unhandled error.
If we treat it as a known error it would propagate back to
call_connect_status() which does handle that error code. This appears
to be the intention of the commit (given below) which added -ENOTCONN as
a return status for xs_tcp_finish_connecting().
So add -ENOTCONN to the switch statement as an error to pass through to
the caller.
Link: https://bugzilla.suse.com/show_bug.cgi?id=1231050
Link: https://access.redhat.com/discussions/3434091
Fixes: 01d37c428ae0 ("SUNRPC: xprt_connect() don't abort the task if the transport isn't bound")
Signed-off-by: NeilBrown <[email protected]>
Reviewed-by: Benjamin Coddington <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Although the current device tree binding of thermal zones require the
trips subnode, the binding in kernel v5.15 does not require it, and many
device trees shipped with the kernel, for example,
allwinner/sun50i-a64.dtsi and mediatek/mt8183-kukui.dtsi in ARM64, still
comply to the old binding and contain no trips subnode.
Allow the code to successfully register thermal zones w/o trips subnode
for DT binding compatibility now.
Furtherly, the inconsistency between DTs and bindings should be resolved
by either adding empty trips subnode or dropping the trips subnode
requirement.
Fixes: d0c75fa2c17f ("thermal/of: Initialize trip points separately")
Signed-off-by: Icenowy Zheng <[email protected]>
[[email protected]: Reworked logic and kernel log messages]
Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Run "make -C tools thermal" can create a soft link for thermal.h in
tools/include/uapi/linux. Just rm it when make clean.
Signed-off-by: zhang jiao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
The sampling handler, provided by the user alongside a void* context,
was invoked with an internal structure instead of the user context.
Correct the invocation of the sampling handler to pass the user context
pointer instead.
Note that the approach taken is similar to that in events.c, and will
reduce the chances of this mistake happening if additional sampling
callbacks are added.
Fixes: 47c4b0de080a ("tools/lib/thermal: Add a thermal library")
Signed-off-by: Emil Dahl Juhl <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Annotate LMH IRQs with lockdep classes so that the lockdep doesn't
report possible recursive locking issue between LMH and GIC interrupts.
For the reference:
CPU0
----
lock(&irq_desc_lock_class);
lock(&irq_desc_lock_class);
*** DEADLOCK ***
Call trace:
dump_backtrace+0x98/0xf0
show_stack+0x18/0x24
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
print_deadlock_bug+0x258/0x348
__lock_acquire+0x1078/0x1f44
lock_acquire+0x1fc/0x32c
_raw_spin_lock_irqsave+0x60/0x88
__irq_get_desc_lock+0x58/0x98
enable_irq+0x38/0xa0
lmh_enable_interrupt+0x2c/0x38
irq_enable+0x40/0x8c
__irq_startup+0x78/0xa4
irq_startup+0x78/0x168
__enable_irq+0x70/0x7c
enable_irq+0x4c/0xa0
qcom_cpufreq_ready+0x20/0x2c
cpufreq_online+0x2a8/0x988
cpufreq_add_dev+0x80/0x98
subsys_interface_register+0x104/0x134
cpufreq_register_driver+0x150/0x234
qcom_cpufreq_hw_driver_probe+0x2a8/0x388
platform_probe+0x68/0xc0
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x20c/0x62c
worker_thread+0x1bc/0x36c
kthread+0x120/0x124
ret_from_fork+0x10/0x20
Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver")
Cc: [email protected]
Signed-off-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
'Sanjay R Mehta' is no longer with AMD, I will take over as the
maintainer of the AMD SPI driver moving forward.
I request to be added as the new maintainer.
Signed-off-by: Raju Rangoju <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add new driver version to support tas2563 & tas2781 qfn chip
Signed-off-by: Shenghao Ding <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.12
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
* tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
EDAC/qcom: Make irq configuration optional
firmware: qcom: scm: fix a NULL-pointer dereference
firmware: qcom: scm: suppress download mode error
soc: qcom: Add check devm_kasprintf() returned value
MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The scancodes for the Mic Mute and Airplane keys on the Ideapad Pro 5
(14AHP9 at least, probably the other variants too) are different and
were not being picked up by the driver. This adds them to the keymap.
Apart from what is already supported, the remaining fn keys are
unfortunately producing windows-specific key-combos.
Signed-off-by: Renato Caldas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Some Alienware devices have a key that locks/unlocks the Meta key. This
key triggers a WMI event that should be ignored by the kernel, as it's
handled by internally the firmware.
There is no known way of changing this default behavior. The firmware
would lock/unlock the Meta key, regardless of how the event is handled.
Tested on an Alienware x15 R1.
Signed-off-by: Kurt Borja <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Acked-by: Pali Rohár <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Fixes the following error:
dell_smbios: Unable to run on non-Dell system
Which is triggered after dell-wmi driver fails to initialize on
Alienware systems, as it depends on dell-smbios.
This effectively extends dell-wmi, dell-smbios and dcdbas support to
Alienware devices, that might share some features of the SMBIOS intereface
calling interface with other Dell products.
Tested on an Alienware X15 R1.
Signed-off-by: Kurt Borja <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Acked-by: Pali Rohár <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
If amdtp_stream_init() fails in amdtp_tscm_init(), the latter returns zero,
though it's supposed to return error code, which is checked inside
init_stream() in file tascam-stream.c.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 47faeea25ef3 ("ALSA: firewire-tascam: add data block processing layer")
Signed-off-by: Murad Masimov <[email protected]>
Reviewed-by: Takashi Sakamoto <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://patch.msgid.link/[email protected]
|
|
The legacy rawmidi tries to enumerate all possible UMP groups
belonging to the UMP endpoint. But currently it shows all 16 ports
when the UMP endpoint is configured with static blocks, although most
of them may be unused.
There was already a fix for the sequencer client side to ignore such
groups in the commit 3bfd7c0ba184 ("ALSA: seq: ump: Skip useless ports
for static blocks"), and this commit is a similar fix for UMP
rawmidi devices; it adds simply the check for the validity of each
group that has been already parsed. (Note that the group info was
moved to snd_ump_endpoint.groups[] by the commit 0642a3c5cacc0321c755
("ALSA: ump: Update substream name from assigned FB names")).
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Loading the amd_pmc module as:
amd_pmc enable_stb=1
...can result in the following messages in the kernel ring buffer:
amd_pmc AMDI0009:00: SMU cmd failed. err: 0xff
ioremap on RAM at 0x0000000000000000 - 0x0000000000ffffff
WARNING: CPU: 10 PID: 2151 at arch/x86/mm/ioremap.c:217 __ioremap_caller+0x2cd/0x340
Further debugging reveals that this occurs when the requests for
S2D_PHYS_ADDR_LOW and S2D_PHYS_ADDR_HIGH return a value of 0,
indicating that the STB is inaccessible. To prevent the ioremap
warning and provide clarity to the user, handle the invalid address
and display an error message.
Link: https://lore.kernel.org/platform-driver-x86/[email protected]
Fixes: 3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Acked-by: Shyam Sundar S K <[email protected]>
Signed-off-by: Corey Hickey <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Add SMU metrics table support for 1Ah family 60h model. This information
will be used by the PMF driver to alter the system thermals.
Co-developed-by: Patil Rajesh Reddy <[email protected]>
Signed-off-by: Patil Rajesh Reddy <[email protected]>
Signed-off-by: Shyam Sundar S K <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
When remaining resources are being cleaned up on driver close,
outstanding VM mappings may result in resources being leaked, due
to an object reference loop, as shown below, with each object (or
set of objects) referencing the object below it:
PVR GEM Object
GPU scheduler "finished" fence
GPU scheduler “scheduled” fence
PVR driver “done” fence
PVR Context
PVR VM Context
PVR VM Mappings
PVR GEM Object
The reference that the PVR VM Context has on the VM mappings is a
soft one, in the sense that the freeing of outstanding VM mappings
is done as part of VM context destruction; no reference counts are
involved, as is the case for all the other references in the loop.
To break the reference loop during cleanup, free the outstanding
VM mappings before destroying the PVR Context associated with the
VM context.
Signed-off-by: Brendan King <[email protected]>
Signed-off-by: Matt Coster <[email protected]>
Reviewed-by: Frank Binns <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This adds a linked list of VM contexts which is needed for the next patch
to be able to correctly track VM contexts for destruction on file close.
It is only safe for VM contexts to be removed from the list and destroyed
when not in interrupt context.
Signed-off-by: Brendan King <[email protected]>
Signed-off-by: Matt Coster <[email protected]>
Reviewed-by: Frank Binns <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Recently, we got a customer report that CIFS triggers oops while
reconnecting to a server. [0]
The workload runs on Kubernetes, and some pods mount CIFS servers
in non-root network namespaces. The problem rarely happened, but
it was always while the pod was dying.
The root cause is wrong reference counting for network namespace.
CIFS uses kernel sockets, which do not hold refcnt of the netns that
the socket belongs to. That means CIFS must ensure the socket is
always freed before its netns; otherwise, use-after-free happens.
The repro steps are roughly:
1. mount CIFS in a non-root netns
2. drop packets from the netns
3. destroy the netns
4. unmount CIFS
We can reproduce the issue quickly with the script [1] below and see
the splat [2] if CONFIG_NET_NS_REFCNT_TRACKER is enabled.
When the socket is TCP, it is hard to guarantee the netns lifetime
without holding refcnt due to async timers.
Let's hold netns refcnt for each socket as done for SMC in commit
9744d2bf1976 ("smc: Fix use-after-free in tcp_write_timer_handler().").
Note that we need to move put_net() from cifs_put_tcp_session() to
clean_demultiplex_info(); otherwise, __sock_create() still could touch a
freed netns while cifsd tries to reconnect from cifs_demultiplex_thread().
Also, maybe_get_net() cannot be put just before __sock_create() because
the code is not under RCU and there is a small chance that the same
address happened to be reallocated to another netns.
[0]:
CIFS: VFS: \\XXXXXXXXXXX has not responded in 15 seconds. Reconnecting...
CIFS: Serverclose failed 4 times, giving up
Unable to handle kernel paging request at virtual address 14de99e461f84a07
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
[14de99e461f84a07] address between user and kernel address ranges
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in: cls_bpf sch_ingress nls_utf8 cifs cifs_arc4 cifs_md4 dns_resolver tcp_diag inet_diag veth xt_state xt_connmark nf_conntrack_netlink xt_nat xt_statistic xt_MASQUERADE xt_mark xt_addrtype ipt_REJECT nf_reject_ipv4 nft_chain_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment nft_compat nf_tables nfnetlink overlay nls_ascii nls_cp437 sunrpc vfat fat aes_ce_blk aes_ce_cipher ghash_ce sm4_ce_cipher sm4 sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 sha1_ce ena button sch_fq_codel loop fuse configfs dmi_sysfs sha2_ce sha256_arm64 dm_mirror dm_region_hash dm_log dm_mod dax efivarfs
CPU: 5 PID: 2690970 Comm: cifsd Not tainted 6.1.103-109.184.amzn2023.aarch64 #1
Hardware name: Amazon EC2 r7g.4xlarge/, BIOS 1.0 11/1/2018
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : fib_rules_lookup+0x44/0x238
lr : __fib_lookup+0x64/0xbc
sp : ffff8000265db790
x29: ffff8000265db790 x28: 0000000000000000 x27: 000000000000bd01
x26: 0000000000000000 x25: ffff000b4baf8000 x24: ffff00047b5e4580
x23: ffff8000265db7e0 x22: 0000000000000000 x21: ffff00047b5e4500
x20: ffff0010e3f694f8 x19: 14de99e461f849f7 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 3f92800abd010002
x11: 0000000000000001 x10: ffff0010e3f69420 x9 : ffff800008a6f294
x8 : 0000000000000000 x7 : 0000000000000006 x6 : 0000000000000000
x5 : 0000000000000001 x4 : ffff001924354280 x3 : ffff8000265db7e0
x2 : 0000000000000000 x1 : ffff0010e3f694f8 x0 : ffff00047b5e4500
Call trace:
fib_rules_lookup+0x44/0x238
__fib_lookup+0x64/0xbc
ip_route_output_key_hash_rcu+0x2c4/0x398
ip_route_output_key_hash+0x60/0x8c
tcp_v4_connect+0x290/0x488
__inet_stream_connect+0x108/0x3d0
inet_stream_connect+0x50/0x78
kernel_connect+0x6c/0xac
generic_ip_connect+0x10c/0x6c8 [cifs]
__reconnect_target_unlocked+0xa0/0x214 [cifs]
reconnect_dfs_server+0x144/0x460 [cifs]
cifs_reconnect+0x88/0x148 [cifs]
cifs_readv_from_socket+0x230/0x430 [cifs]
cifs_read_from_socket+0x74/0xa8 [cifs]
cifs_demultiplex_thread+0xf8/0x704 [cifs]
kthread+0xd0/0xd4
Code: aa0003f8 f8480f13 eb18027f 540006c0 (b9401264)
[1]:
CIFS_CRED="/root/cred.cifs"
CIFS_USER="Administrator"
CIFS_PASS="Password"
CIFS_IP="X.X.X.X"
CIFS_PATH="//${CIFS_IP}/Users/Administrator/Desktop/CIFS_TEST"
CIFS_MNT="/mnt/smb"
DEV="enp0s3"
cat <<EOF > ${CIFS_CRED}
username=${CIFS_USER}
password=${CIFS_PASS}
domain=EXAMPLE.COM
EOF
unshare -n bash -c "
mkdir -p ${CIFS_MNT}
ip netns attach root 1
ip link add eth0 type veth peer veth0 netns root
ip link set eth0 up
ip -n root link set veth0 up
ip addr add 192.168.0.2/24 dev eth0
ip -n root addr add 192.168.0.1/24 dev veth0
ip route add default via 192.168.0.1 dev eth0
ip netns exec root sysctl net.ipv4.ip_forward=1
ip netns exec root iptables -t nat -A POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE
mount -t cifs ${CIFS_PATH} ${CIFS_MNT} -o vers=3.0,sec=ntlmssp,credentials=${CIFS_CRED},rsize=65536,wsize=65536,cache=none,echo_interval=1
touch ${CIFS_MNT}/a.txt
ip netns exec root iptables -t nat -D POSTROUTING -s 192.168.0.2 -o ${DEV} -j MASQUERADE
"
umount ${CIFS_MNT}
[2]:
ref_tracker: net notrefcnt@000000004bbc008d has 1/1 users at
sk_alloc (./include/net/net_namespace.h:339 net/core/sock.c:2227)
inet_create (net/ipv4/af_inet.c:326 net/ipv4/af_inet.c:252)
__sock_create (net/socket.c:1576)
generic_ip_connect (fs/smb/client/connect.c:3075)
cifs_get_tcp_session.part.0 (fs/smb/client/connect.c:3160 fs/smb/client/connect.c:1798)
cifs_mount_get_session (fs/smb/client/trace.h:959 fs/smb/client/connect.c:3366)
dfs_mount_share (fs/smb/client/dfs.c:63 fs/smb/client/dfs.c:285)
cifs_mount (fs/smb/client/connect.c:3622)
cifs_smb3_do_mount (fs/smb/client/cifsfs.c:949)
smb3_get_tree (fs/smb/client/fs_context.c:784 fs/smb/client/fs_context.c:802 fs/smb/client/fs_context.c:794)
vfs_get_tree (fs/super.c:1800)
path_mount (fs/namespace.c:3508 fs/namespace.c:3834)
__x64_sys_mount (fs/namespace.c:3848 fs/namespace.c:4057 fs/namespace.c:4034 fs/namespace.c:4034)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
Fixes: 26abe14379f8 ("net: Modify sk_alloc to not reference count the netns of kernel sockets.")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Acked-by: Tom Talpey <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
|
|
Setting TPM_CHIP_FLAG_SUSPENDED in the end of tpm_pm_suspend() can be racy
according, as this leaves window for tpm_hwrng_read() to be called while
the operation is in progress. The recent bug report gives also evidence of
this behaviour.
Aadress this by locking the TPM chip before checking any chip->flags both
in tpm_pm_suspend() and tpm_hwrng_read(). Move TPM_CHIP_FLAG_SUSPENDED
check inside tpm_get_random() so that it will be always checked only when
the lock is reserved.
Cc: [email protected] # v6.4+
Fixes: 99d464506255 ("tpm: Prevent hwrng from activating during resume")
Reported-by: Mike Seo <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219383
Reviewed-by: Jerry Snitselaar <[email protected]>
Tested-by: Mike Seo <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>
|
|
Enqueue packets in dql after dma engine starts causes race condition.
Tx transfer starts once dma engine is started and may execute dql dequeue
in completion before it gets queued. It results in following kernel crash
while running iperf stress test:
kernel BUG at lib/dynamic_queue_limits.c:99!
<snip>
Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
pc : dql_completed+0x238/0x248
lr : dql_completed+0x3c/0x248
Call trace:
dql_completed+0x238/0x248
axienet_dma_tx_cb+0xa0/0x170
xilinx_dma_do_tasklet+0xdc/0x290
tasklet_action_common+0xf8/0x11c
tasklet_action+0x30/0x3c
handle_softirqs+0xf8/0x230
<snip>
Start dmaengine after enqueue in dql fixes the crash.
Fixes: 6a91b846af85 ("net: axienet: Introduce dmaengine support")
Signed-off-by: Suraj Gupta <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Signed-off-by: Florian Fainelli <[email protected]>
Acked-by: Andrew Lunn <[email protected]>
Acked-by: Vladimir Oltean <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
In the previous implementation, vf_state is allocated memory only when VF
is enabled. However, net_device_ops::ndo_set_vf_mac() may be called before
VF is enabled to configure the MAC address of VF. If this is the case,
enetc_pf_set_vf_mac() will access vf_state, resulting in access to a null
pointer. The simplified error log is as follows.
root@ls1028ardb:~# ip link set eno0 vf 1 mac 00:0c:e7:66:77:89
[ 173.543315] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
[ 173.637254] pc : enetc_pf_set_vf_mac+0x3c/0x80 Message from sy
[ 173.641973] lr : do_setlink+0x4a8/0xec8
[ 173.732292] Call trace:
[ 173.734740] enetc_pf_set_vf_mac+0x3c/0x80
[ 173.738847] __rtnl_newlink+0x530/0x89c
[ 173.742692] rtnl_newlink+0x50/0x7c
[ 173.746189] rtnetlink_rcv_msg+0x128/0x390
[ 173.750298] netlink_rcv_skb+0x60/0x130
[ 173.754145] rtnetlink_rcv+0x18/0x24
[ 173.757731] netlink_unicast+0x318/0x380
[ 173.761665] netlink_sendmsg+0x17c/0x3c8
Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers")
Signed-off-by: Wei Fang <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Tested-by: Vladimir Oltean <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 9 are cc:stable. 13 are MM and 4 are non-MM.
The usual collection of singletons - please see the changelogs"
* tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
mm, mmap: limit THP alignment of anonymous mappings to PMD-aligned sizes
mm: shrinker: avoid memleak in alloc_shrinker_info
.mailmap: update e-mail address for Eugen Hristev
vmscan,migrate: fix page count imbalance on node stats when demoting pages
mailmap: update Jarkko's email addresses
mm: allow set/clear page_type again
nilfs2: fix potential deadlock with newly created symlinks
Squashfs: fix variable overflow in squashfs_readpage_block
kasan: remove vmalloc_percpu test
tools/mm: -Werror fixes in page-types/slabinfo
mm, swap: avoid over reclaim of full clusters
mm: fix PSWPIN counter for large folios swap-in
mm: avoid VM_BUG_ON when try to map an anon large folio to zero page.
mm/codetag: fix null pointer check logic for ref and tag
mm/gup: stop leaking pinned pages in low memory conditions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy fixes from Vinod Koul:
- Qualcomm QMP driver fixes for null deref on suspend, bogus supplies
fix and reset entries fix
- BCM usb driver init array fix
- cadence array offset fix
- starfive link configuration fix
- config dependency fix for rockchip driver
- freescale reset signal fix before pll lock
- tegra driver fix for error pointer check
* tag 'phy-fixes-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: tegra: xusb: Add error pointer check in xusb.c
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Fix X1E80100 resets entries
phy: freescale: imx8m-pcie: Do CMN_RST just before PHY PLL lock check
phy: phy-rockchip-samsung-hdptx: Depend on CONFIG_COMMON_CLK
phy: ti: phy-j721e-wiz: fix usxgmii configuration
phy: starfive: jh7110-usb: Fix link configuration to controller
phy: qcom: qmp-pcie: drop bogus x1e80100 qref supplies
phy: qcom: qmp-combo: move driver data initialisation earlier
phy: qcom: qmp-usbc: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb-legacy: fix NULL-deref on runtime suspend
phy: qcom: qmp-usb: fix NULL-deref on runtime suspend
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: add missing x1e80100 pipediv2 clocks
phy: usb: disable COMMONONN for dual mode
phy: cadence: Sierra: Fix offset of DEQ open eye algorithm control register
phy: usb: Fix missing elements in BCM4908 USB init array
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- TI driver fix to set EOP for cyclic BCDMA transfers
- sh rz-dmac driver fix for handling config with zero address
* tag 'dmaengine-fix-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Set EOP for all TRs in cyclic BCDMA transfer
dmaengine: sh: rz-dmac: handle configs where one address is zero
|
|
A size validation fix similar to that in Commit 50619dbf8db7 ("sctp: add
size validation when walking chunks") is also required in sctp_sf_ootb()
to address a crash reported by syzbot:
BUG: KMSAN: uninit-value in sctp_sf_ootb+0x7f5/0xce0 net/sctp/sm_statefuns.c:3712
sctp_sf_ootb+0x7f5/0xce0 net/sctp/sm_statefuns.c:3712
sctp_do_sm+0x181/0x93d0 net/sctp/sm_sideeffect.c:1166
sctp_endpoint_bh_rcv+0xc38/0xf90 net/sctp/endpointola.c:407
sctp_inq_push+0x2ef/0x380 net/sctp/inqueue.c:88
sctp_rcv+0x3831/0x3b20 net/sctp/input.c:243
sctp4_rcv+0x42/0x50 net/sctp/protocol.c:1159
ip_protocol_deliver_rcu+0xb51/0x13d0 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233
Reported-by: [email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Xin Long <[email protected]>
Link: https://patch.msgid.link/a29ebb6d8b9f8affd0f9abb296faafafe10c17d8.1730223981.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core revert from Greg KH:
"Here is a single driver core revert for 6.12-rc6. It reverts a change
that came in -rc1 that was supposed to resolve a reported problem, but
caused another one, so revert it for now so that we can get this all
worked out properly in 6.13.
The revert has been in linux-next all week with no reported issues"
* tag 'driver-core-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "driver core: Fix uevent_show() vs driver detach race"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.12-rc6 that
have been sitting in my tree this week. Included in here are the
following:
- thunderbolt driver fixes for reported issues
- USB typec driver fixes
- xhci driver fixes for reported problems
- dwc2 driver revert for a broken change
- usb phy driver fix
- usbip tool fix
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: restrict SNK_WAIT_CAPABILITIES_TIMEOUT transitions to non self-powered devices
usb: phy: Fix API devm_usb_put_phy() can not release the phy
usb: typec: use cleanup facility for 'altmodes_node'
usb: typec: fix unreleased fwnode_handle in typec_port_register_altmodes()
usb: typec: qcom-pmic-typec: fix missing fwnode removal in error path
usb: typec: qcom-pmic-typec: use fwnode_handle_put() to release fwnodes
usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links
Revert "usb: dwc2: Skip clock gating on Broadcom SoCs"
xhci: Fix Link TRB DMA in command ring stopped completion event
xhci: Use pm_runtime_get to prevent RPM on unsupported systems
usbip: tools: Fix detach_port() invalid port error path
thunderbolt: Honor TMU requirements in the domain when setting TMU mode
thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()
|
|
When the MM_WALK capability is enabled, memory that is mostly accessed by
a VM appears younger than it really is, therefore this memory will be less
likely to be evicted. Therefore, the presence of a running VM can
significantly increase swap-outs for non-VM memory, regressing the
performance for the rest of the system.
Fix this regression by always calling {ptep,pmdp}_clear_young_notify()
whenever we clear the young bits on PMDs/PTEs.
[[email protected]: fix link-time error]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Yu Zhao <[email protected]>
Signed-off-by: James Houghton <[email protected]>
Reported-by: David Stevens <[email protected]>
Cc: Axel Rasmussen <[email protected]>
Cc: David Matlack <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Oliver Upton <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Wei Xu <[email protected]>
Cc: <[email protected]>
Cc: kernel test robot <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|